D2343PB Part15 Subpart B-LCD Monitor User Manual 2

 

E N G L I S H OWNERS MANUAL CINEMA 3D MONITOR Please read this manual carefully before operating your set and retain it for future reference. CINEMA 3D MONITOR MODEL D2343P D2743P www.lg.com E N E G N L G I S H 2 TABLE OF CONTENTS CONTENTS 3 ASSEMBLING AND PREPAR-

ING Unpacking Parts and buttons Setting up the Monitor set

- Attaching the Stand Base

- Detaching the Stand Base

- Mounting on a table

- Using the cable holder

- Mounting on a wall 3 4 5 5 6 7 7 9 10 USING THE MONITOR SET 10 Connecting to a PC

- D-SUB connection 10

- DVI-D connection 10 10

- HDMI connection 12 CUSTOMIZING SETTINGS 13 Customizing Settings

- Menu Settings 13

- PICTURE 14

- COLOR 15

- DISPLAY 16

- VOLUME 16

- OTHERS 17

- FUNC.Settings 18

- 3D SETTINGS 18 19

- Setting Dual Play 20 PICTURE MODE 21

- SUPER+RESOLUTION 22 SUPER ENERGY SAVING 23 TROUBLESHOOTING 25 TROUBLESHOOTING WHEN USING 3D MODE 26 SPECIFICATIONS 26 D2343P 27 D2743P 28 Preset Modes (Resolution) 29 Indicator 30 SAFETY PRECAUTIONS 30

- Precautions to take when viewing 3D images 30

- When using 3D Glasses 31 PROPER POSTURE 31 Proper posture for using the Monitor set. 31 Precautions to take when viewing 3D im-

ages ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. E N E G N L G I S H CD(Owner's Manual) /

Card D-SUB Cable DVI-D Cable

(This cable is not included in all countries.) or Power Cord AC-DC Adapter

( Depending on the country ) AC-DC Adapter

( Depending on the country ) Stand Body Stand Body Two Screws Stand Base 3D Glasses

(Normal type) 3D Glasses

(Clip-on type) The number of 3D glasses may differ depending on the model of country. CAUTION y Do not use any unapproved accessories to ensure the safety and product life span. y Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. 4 ASSEMBLING AND PREPARING Parts and buttons E N E G N L G I S H Power Indicator y Lighting On: Turned on y Lighting Off: Turned off

(Power Button) Button (See p.12) Connection panel (See p.10) ASSEMBLING AND PREPARING 5 Setting up the Monitor set Attaching the Stand Base 1 Place the Monitor set with the screen side down on a flat and cushioned surface. D2743P 1 2 3 4 Attach the Stand Body to the monitor set. Use two screws to fix the Stand Body and monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. E N E G N L G I S H CAUTION Lay a foam mat or soft protective cloth on the surface to protect the screen from damage. 2 D2343P 1 2 3 Attach the Stand Body to the monitor set. Attach the Stand Base. Tighten the screw to the right with a coin. Stand Body Stand Body Stand Base Stand Body Stand Base 6 ASSEMBLING AND PREPARING Detaching the Stand Base D2743P E N E G N L G I S H 1 Place the Monitor set with the screen side down on a flat and cushioned surface. 1 2 3 Turn the screw to the left with a coin. Pull out the Stand Base from the Stand Body. Remove two screws and pull out the Stand Body from the monitor set. 2 D2343P 1 2 3 Pull out the Stand Body and Stand Base from the monitor set. Turn the screw to the left with a coin. Pull out the Stand Base. Stand Body Stand Body Stand Base Stand Base Stand Body Stand Body Stand Base CAUTION y This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. y Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. Mounting on a table 1 Lift and tilt the Monitor set into its upright position on a table. Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm ASSEMBLING AND PREPARING 7

(Power) button on the bottom switch 3 Press panel to turn the power on. CAUTION Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur. Using the cable holder E N E G N L G I S H 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. Cable holder or 8 ASSEMBLING AND PREPARING WARNING E N E G N L G I S H When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the Monitor set and a table. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front Rear ASSEMBLING AND PREPARING 9 Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Model VESA (A x B) Standard screw Number of screws D2343P 75 x 75 M4 4 D2743P 100 x 100 E N E G N L G I S H CAUTION y Disconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur. y If you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury. y Use only an authorized LG wall mount and contact the local dealer or qualified personnel. y Do not over tighten the screws as this may cause damage to the Monitor set and void your warranty. y Use only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. NOTE y Use the screws that are listed on the VESA standard screw specifications. y The wall mount kit will include an installation manual and necessary parts. y The wall mount bracket is optional. You can obtain additional accessories from your local dealer. y The length of screws may differ depending on the wall mount. Be sure to use the proper length. y For more information, refer to the instructions supplied with the wall mount. 10 cm 10 cm 10 cm 10 cm If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. y 784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm

* Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm y 787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad and screws. 10 USING THE MONITOR SET USING THE MONITOR SET E N E G N L G I S H Connecting to a PC y Your Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-SUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. DVI-D connection Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations. HDMI connection Transmits the digital video and audio signals from your PC or A/V to the Monitor set. Connect the PC or A/V and the Monitor set with the HDMI cable as shown in the following illustrations. NOTE y When using a D-Sub signal input cable connector for Macintosh y Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector. NOTE y If you use HDMI PC, it can cause compatibility problem. USING THE MONITOR SET 11 Self Image Setting Function Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode) E N E G N L G I S H CAUTION y Connect the signal input cable and tighten it by turning the screws clockwise. y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. y Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE NOTE y When you want to use two PC in our Monitor, please connect the signal cable(D-SUB/

DVI-D/HDMI) respectively in Monitor set. y If you turn the Monitor set on while it is cold, the screen may flicker. This is normal. y Some red, green, or blue spots may appear on the screen. This is normal. y "Self Image Setting" Function. This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode) y AUTO Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution.

(Only supported in Analog Mode) 12 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS E N E G N L G I S H 1 Press the desired button on the bottom of the Monitor set. 2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set. To return to the upper menu or set other menu items, use the up arrow (

) button. 3 Select EXIT to leave the OSD menu. Monitor set Buttons Button Description Accesses the main menus.(See p.13) OSD LOCKED/

UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. The 2D 3D hot key is used to move to the 3D Settings menu. Recognizes the input image automatically and displays 3D images without having the 3D mode on manually. Activates menus to select and adjust various functions. When adjusting your display settings, always press the AUTO button on the MONITOR SETUP OSD. (Only supported in Analog Mode) The best display mode 1920 x 1080 You can choose the input signal. When two input signals are connected, you can select the input signal (D-SUB/DVI/

HDMI) you want. When only one signal is connected, it is automatically detected. The default setting is D-SUB. EXIT Exit the OSD(On Screen Display). Turns the power on or off. Power Indicator The power indicator stays red if the display is running properly

(On Mode). If the display is in Sleep Mode, the power indicator blinks red.

(Power Button) CUSTOMIZING SETTINGS 13 E N E G N L G I S H Customizing Settings Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Set the options by pressing the or or buttons. 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (

) button. Each option is explained below. MENU Analog Digital HDMI Description BRIGHTNESS CONTRAST WIDE/ORIGINAL RESET To adjust the brightness, contrast of the screen WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original.

* This function works only if input resolution is lower than Monitor set ratio

(16:9). Restore all factory default settings. Press the , buttons to reset immediately. MENU > NEXT MENU Analog Digital HDMI Description PICTURE COLOR DISPLAY VOLUME OTHERS SHARPNESS BLACK LEVEL OVER SCAN RESPONSE TIME GAMMA COLOR TEMP HORIZONTAL VERTICAL CLOCK PHASE LANGUAGE POWER INDICATOR WHITE BALANCE y Analog: D-SUB(Analog signal) input. y Digital: DVI-D(Digital signal) input. y HDMI: HDMI(Digital signal) input. To adjust the clearness of the screen . To set offset level To improve the clarity and stability of the screen To set the response time of displayed picture. To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To adjust the volume To customize the screen status for a user's operating environment 14 CUSTOMIZING SETTINGS PICTURE E N E G N L G I S H 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Enter to PICTURE by pressing the button. 4 Set the options by pressing the or or buttons. 5 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (

) button. Each option is explained below. MENU > NEXT MENU > PICTURE SHARPNESS BLACK LEVEL OVER SCAN RESPONSE TIME Description To adjust the clearness of the screen. You can set the offset level. If you select'HIGH', the screen will be bright and if you select LOW, the screen will be dark.(only for HDMI input)

* Offset?As the criteria for video signal, it is the darkest screen the monitor can show. To select the range of output image for DTV timing in HDMI input.(only for HDMI input)Recommend overscan function to turn on when connect AV equipment. You can set a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use 'NORMAL'. For a fast-moving picture, it is recommended that you use 'FAST'. y OVER SCAN and RESPONSE TIME are disabled in 3D mode. CUSTOMIZING SETTINGS 15 E N E G N L G I S H COLOR 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select COLOR by pressing the button. 4 Enter to COLOR by pressing the button. 5 Set the options by pressing the or or buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (

) button. Each option is explained below. MENU > NEXT MENU > COLOR GAMMA COLOR TEMP Description Set your own gamma value. : GAMMA 0, GAMMA 1, GAMMA 2 on the monitor, high gamma values display whitish images and low gamma values display blackish images. CUSTOM RED:Set your own red color levels. GREEN: Set your own green color levels. BLUE:Set your own blue color levels. Select the screen color. WARM: Set the screen to warm color temperature (more red). MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature (more blue). 16 CUSTOMIZING SETTINGS DISPLAY E N E G N L G I S H 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select DISPLAY by pressing the button. 4 Enter to DISPLAY by pressing the button. 5 Set the options by pressing the or or buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (

) button. Each option is explained below. MENU > NEXT MENU > DISPLAY HORIZONTAL VERTICAL CLOCK PHASE Description To move image left and right. To move image up and down. To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. y This setting is only available for analog input. VOLUME 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. 2 Select the "NEXT MENU" button to enter the more option settings. 3 Select VOLUME by pressing the button. 4 Enter to VOLUME by pressing the button. 5 Set the options by pressing the or buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow (

) button. Each option is explained below. MENU > NEXT MENU > VOLUME VOLUME To adjust the volume of headphone/earphone.(Only for HDMI input) Description