| submitted | available | document details (if available) | source link |
|---|---|---|---|
| August 02 2001 | July 02 2001 |
| various | User manual | Users Manual | 570.38 KiB | August 02 2001 / July 02 2001 |
FCC PART 15 Subpart C EUT Users Manual FOR LG ELECTRONICS INC. LG Kangseo B/D 36, Munlae-Dong, 6-Ga, Youngdungpo-Gu, Seoul, 150-096, Korea FCC ID: BEJGT8310C October 27, 2000 Equipment Type:
Digital Spread Spectrum Cordless Phone Household Appliances This Report Concerns:
Original Report Test Engineer: Hien Pham Test Date: October 12, 2000 Reviewed By:
John Y. Chan Engineering Manager Prepared By: Bay Area Compliance Laboratory Corporation 230 Commercial Street, Suite 2 Sunnyvale, CA 94086 Tel: (408) 732-9162 Fax: (408) 732-9164 Note: This report may not be duplicated without prior written consent of Bay Area Compliance Laboratory Corporation. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. LG Electronics Inc. FCC ID: BEJGT8310C TABLE OF CONTENTS 1 - GENERAL INFORMATION................................................................................................................................................. 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................3 1.2 OBJECTIVE ................................................................................................................................................................................3 1.3 RELATED SUBMITTAL(S)/GRANT(S).....................................................................................................................................3 1.4 TEST METHODOLOGY..............................................................................................................................................................3 1.5 TEST FACILITY.........................................................................................................................................................................4 1.6 TEST EQUIPMENT LIST ............................................................................................................................................................4 1.7 EQUIPMENT UNDER TEST (EUT)...........................................................................................................................................5 1.8 EUT CONFIGURATION DETAILS AND LIST...........................................................................................................................5 1.9 EXTERNAL I/O CABLING........................................................................................................................................................5 APPENDIX A AGENT AUTHORIZATION LETTER .................................................................................................... 6 APPENDIX B USER MANUAL .............................................................................................................................................. 8 FCC PART 15 WARNING:..............................................................................................................................................................9 D.S.KIM / QUALITY ENGINEERING DEPT. .................................................................................................10 USERS MANUAL........................................................................................................................................................................12 GETTING TO KNOW YOUR NEW PHONE......................................................................................................................14 USING YOUR PHONE ...............................................................................................................................................................24 THE INTEGRATED ANSWERING DEVICE.....................................................................................................................28 USING CALLER ID AND CALL WAITING ID.................................................................................................................31 VOICE MAIL.................................................................................................................................................................................34 Report # EUT User manual Page 2 of 2 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C 1 - GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) The LG Electronic Inc., FCC ID BEJGT8310C or the "EUT" as referred to in this report is a Digital Spread Spectrum Cordless Phone which has 20 channel possible in the 904-926 MHz Bandwidth, and the transmission range up to 1 Km in open sight (longer range than analog 900MHz cordless phone). The EUT was composed of two parts: one is the handset which measures 9 L x 2.125 W x 1.675 H, the other is the base which measures 7 L x 5.5 W x 2.25 H. 1.2 Objective This type approval report is prepared on behalf of LG Electronics Inc., in accordance with Part 2, Subpart J, Part 15, Subparts A and B of the Federal Communication Commissions rules. The objective of the manufacturer is to demonstrate compliance with FCC rules for Output Power, 6 dB Bandwidth, Power Density, Band Edge, Spurious Emission, Processing Gain, Antenna Gain, and Conducted and Radiated Emission. 1.3 Related Submittal(s)/Grant(s) No Related Submittals 1.4 Test Methodology All measurements contained in this report were conducted with ANSI C63.4 1992, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratory, Corp. The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Report # EUT User manual Page 3 of 3 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C 1.5 Test Facility The Open Area Test Site used by Bay Area Compliance Laboratory Corporation to collect radiated and conducted emission measurement data is located in the back parking lot of the building at 230 Commercial Street, Suite 2, Sunnyvale, California, USA. Test site at Bay Area Compliance Laboratory Corporation has been fully described in reports submitted to the Federal Communication Commission (FCC) and Voluntary Control Council for Interference (VCCI). The details of these reports has been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on February 11 and December 10, 1997 and Article 8 of the VCCI regulations on December 25, 1997. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-1992. The Federal Communications Commission and Voluntary Control Council for Interference has the reports on file and is listed under FCC file 31040/SIT 1300F2 and VCCI Registration No.: C-674 and R-657. The test site has been approved by the FCC and VCCI for public use and is listed in the FCC Public Access Link (PAL) database. Additionally, Bay Area Compliance Laboratory Corporation is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program
(NVLAP). The scope of the accreditation covers the FCC Method - 47 CFR Part 15 - Digital Devices, IEC/CISPR 22: 1993, and AS/NZS 3548: Electromagnetic Interference - Limits and Methods of Measurement of Information Technology Equipment test methods under NVLAP Lab Code 200167-0. 1.6 Test Equipment List Manufacturer Description HP HP HP HP HP A.H. System Com-Power Com-Power Solar Electronics Com-Power Com-Power BACL Spectrum Analyzer Spectrum Analyzer Amplifier Quasi-Peak Adapter Amplifier Horn Antenna Log Periodic Antenna Biconical Antenna LISN LISN LISN Data Entry Software Rohde & Schwarz Signal Generator I/Q Modulation Rohde & Schwarz Generator Model 8566B 8593B 8349B 85650A 8447E SAS0200/571 AL-100 AB-100 8012-50-R-24-BNC LI-200 LI-200 DES1 Serial Number 2610A02165 Cal. Due Data 12/6/00 2919A00242 12/20/00 2644A02662 917059 1937A01046 261 16005 14012 968447 12208 12005 0001 12/20/00 12/6/00 12/6/00 12/27/00 11/2/00 11/2/00 12/28/00 12/20/00 12/20/00 12/20/00 SMIQ03B 1125.5555.03 7/10/2002 AMIQ 1110.2003.02 8/10/2002 Report # EUT User manual Page 4 of 4 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C 1.7 Equipment Under Test (EUT) Manufacturer Description LG Electronics Inc. LG Electronics Inc. Handset Base Model GT-8310C GT-8310C Serial Number FCC ID None None BEJGT8310C BEJGT8310C 1.8 EUT Configuration Details and List NOT APPLICABLE 1.9 External I/O Cabling For Base:
Cable Description Length (M) Port/From To Non-Shielded Phone Cable 2.0 RJ11 Port/EUT Line1 RJ11 Port/
Telephone Simulator Report # EUT User manual Page 5 of 5 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Appendix A AGENT AUTHORIZATION LETTER Report # EUT User manual Page 6 of 6 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Report # EUT User manual Page 7 of 7 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Appendix B USER MANUAL Report # EUT User manual Page 8 of 8 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C FCC Part 15 Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Report # EUT User manual Page 9 of 9 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C COMPANY LETTERHEAD DIGITAL SECURITY CODE:
The model(s) GT-8310C has the circuitry for digital security code to provide protection against unintentional access. For each model, one of 16777216 kinds of digital security code is randomly selected and fixed in each telephone as it is manufactured. D.S.Kim / Quality Engineering Dept. LG Information & Communications, Ltd. Report # EUT User manual Page 10 of 10 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Report # EUT User manual Page 11 of 11 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C USERS MANUAL Report # EUT User manual Page 12 of 12 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C GT-8310C (900MHz DSST WITH CALLER ID AND CALLWAITING ID) MANUAL This equipment has tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measurements:
o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help.
++ CAUTION Changes or modification to device not expressly approved by LGIC could void the users authority to operate this equipment. Copyright 2000 by LGE. All rights reserved.
++ Warning This equipment will be inoperable when mains power fails. Model GT-8310C 1999 LGE. No part of this publication may be reproduced, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the written permission of LGE. Report # EUT User manual Page 13 of 13 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C GETTING TO KNOW YOUR NEW PHONE Your new GT-8310C telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID If this is your first cordless telephone, you'11 soon discover that your cordless is similar to regular telephone, except without the cord. If you've owned a cordless in the past, you'll discover that the GT-8310C telephone is the most powerful and full-functioned Call Waiting ID cordless telephone on the market. Some key features are:
m 60 name and number Caller ID/Call Waiting ID memory m 20 name and number programmable memory m Hearing-aid compatibility m High quality digital security communication m Dual mode voice mail serviceable (FSK , STUTTER) Unlike regular telephones, your cordless does not work during power failures. Because of this restriction, we do not recommend you have only cordless telephone in your residence. UNPACKING YOUR PHONE In addition to this handbook, check that you have:
7-Foot Line Cord for Wall Mounting D-AA600 x 3 3.6V 600mA Battery
(This might not be pre-installed in your handset) AC Adapter Report # EUT User manual Page 14 of 14 FCC Part 15 Subpart C Test Report DC New Call Answer RJ-11 MD Time Alarm Record JACK JACK TONE/PULSE SWITCH LG Electronics Inc. FCC ID: BEJGT8310C LOCATING KEYS, LIGHT, AND SWITCHES ON THE BASE The PAGE key - is a homing system for finding the handset. If you press the PAGE key once, the handset beeps for 15 seconds. IN USE light - becomes lit when the GT-8310C is being used. CHARGE light - comes on solid when the handset is in the base. Volume Program Erase
/ /Ring PAGE Report # EUT User manual Page 15 of 15 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C SMITH JOHN 1- 555 123 - 4567 12 : 22 PM 12 / 01 CALL 01 )) VOICE MAIL light flashes slowly to alert you when you receive new messages in your voice mail message mail box. MESSAGE WAITING appears on the display. NEWCALL light flashes more slowly when you receive new calls. This light continues to flash until you review the new calls. ON THE HANDSET DELETE Key- Removes records from the Callers log or from memory dialing. MEM key-Allows you to store frequently dialed numbers and to dial directly from the speed dialing list. FLASH key- Allows you to switch between a call and a Call Waiting call. PGM key-Allows you to program your setting up your function or to edit a name and number in memory. Keys TALK key-Turns the phone on or off so you can dial or talk. Voice mail key-
. Directly access your V. Mail service Dialing keys-Control manual dialing. Scroll keys 3 4 Scrolls through your Callers log Redial key-
Redials your last out-
bound call or inserts a pause in a number when entering numbers into memory. PG M RE/
PA
+1 VOLUME
7 PQRS 0 OPER 9 WXYZ 6 MNO FLASH 2 ABC ME M 4 GHI 8 TUV 5 JKL 3 DEF MUTE TALK DEL V.M 10 ss 1 tt
Report # EUT User manual Page 16 of 16 FCC Part 15 Subpart C Test Report HEADSET JACK LG Electronics Inc. FCC ID: BEJGT8310C VOLUME UP/DOWN KEY- Allows you to adjust the loudness of the handset earpiece, or the ringer or allows you to edit the character at Memory mode. HEADSET Jack It llows you to add a headset to the handset (not included, but available by order.) Report # EUT User manual Page 17 of 17 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C SETTING UP YOUR PHONE Now that you've checked the contents of the carton, it only takes a few steps to set up your phone. STEP 1. CHOOSE A CENTRAL LOCATION FOR THE BASE UNIT The base should be away from all other electronic equipment such as a personal computer, microwave, stereo ,or television. It is also a good idea to place the unit away from noisy areas, or from heat sources such as a radiator or direct sunlight. STEP 2. PLUG IN CORDS You can set your GT-8310C telephone on a tabletop or you can mount the phone on a wall. When on a tabletop, you can place the handset with either the keys facing downward or upward. If you decide to use the wall mount position, you can also place the handset with the same-ward. To use on a tabletop or desk:
1.Take the long telephone line cord that comes with the phone and plug one end into the labeled TEL-LINE 2.Thread the long line cord through the channel in the housing to secure the cord. 3.Take the remaining end and plug it into the wall jack. 4.Plug the adapter tips into the adapter jack. Be sure that the tip is all the way into the jack. 5.Thread the adapter cord through the channel on the left-hand side of the bracket. To mount on a wall:
1.Locate the handset hook. It is a small square plastic piece located at the bottom of the handset receiver well. 2. Slide the handset hook up and turn it around so that the tab is the top. 3.Remove the mounting bracket from the bottom of the phone by pressing down on the two clips near the top. 4. Turn the mounting bracket around so that the larger part the wedge is set the bottom of the phone. Report # EUT User manual Page 18 of 18 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C 5. Use the same method to replace the bracket. 6. Insert the 8 inch line cord into phone jack marked TEL LINE. 7. Thread the line cord through the channel on the right-hand side of the bracket to secure the cord. 8. Plug the adapter tip into the adapter jack. Be sure that the tip is all the way into the jack. 9. Thread the adapter cord through the channel on the left-hand side of the bracket. 10. Insert the other end of the line cord into the wall jack. 11. Align the holes in the bracket over the wall-plate posts. 12. Slide the phone down until the phone is secure. STEP 3. PLUG IN THE ADAPTER Plug the adapter into an electrical outlet. Without AC power, your phone does not operate. STEP 4. ADD THE BATTERY TO THE HANDSET Use this procedure to install or to replace a "dead" battery.
++ CAUTION Use only nickel-cadium(Ni-Cad)battery in the phone. Report # EUT User manual Page 19 of 19 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C 1. Press down on the battery cover and slide the battery cover down to expose the battery well. 2. Locate the battery connectors inside the battery well. If you are replacing a dead battery, remove the old battery by pulling firmly on the battery cords. 3. Insert the battery plug into the connector. It is polarized and only insert in one direction. 4. Place the battery in the battery well. 5. Replace the battery door. STEP 5. TURN THE HANDSET ON You MUST install the battery on the handset to turn on and use your phone. 1. Check the power is on and appears on the display 2. You'll hear the handset's ready tones and the 'READY' message appears on the display. STEP 6. CHARGE THE HANDSET Before you use the phone for the first time, you need to charge the battery for at least 6 hours. Place the handset in the base of the phone. The charge light the base then comes on. Whenever you need to charge your handset, you hear short beeps and see the 'LOW BATTERY'
message. Press TALK and listen for dial tone to test for a fully charged handset. STEP 7. Beginning the programming Sequence Most of the programming options appear in one screens. Press PGM key, SETUP PROGRAM appears on the screen. Report # EUT User manual SETUP PROGRAM Page 20 of 20 READY FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C When you make a selection, the check mark, 33 moves to the selection you have made to use s or t key. After making a selection, the next programming screens appear. If you make a mistake, press (review) key to go back to the previous prompt or start the programming sequence again. When you do not want to go on programming sequence, press PGM to save the previous items and you will exit the programming mode. To begin the programming sequence, press PGM keys and SETUP PROGRAM appears on the screen. STEP 8. Setting area code Many regions are changing how customers use their area codes. In order to dial from your call records and directory records, the GT-8310C needs to distinguish between local and long distance numb ers.
If your region has seven digit dialing (you don't need to dial your area code when making a local call), enter your local area code as described in to set your local area code below.
If your region requires that you always dial ten digits when making local calls, also follow the procedure under to set other local area codes. If you are unsure on how your region works, please contact your local telephone co. TO ENTER AN AREA CODE, use the keypad. If you make a mistake, retype the area code. 8-1 To set your local area code If you set your area code, the GT-8310C telephone removes the area code from a call record within your own area. You need to program the code in order to dial with call records. 1. Press " PGM " key 2. Press (REVIEW) key. The my area code screen display. 3. Press s or t key to enter your area code. The numbers appear on the display as you press the dial keys. If you make a mistake, press "DEL"key, and reenter the area code. STEP 9. SET LOCAL CODE(1~6) If your region requires that you dial ten digits when making local calls, follow the procedures to set other local area codes. Report # EUT User manual FCC Part 15 Subpart C Test Report MY AREA CODE LOCAL CODE 1 Page 21 of 21 _ _ LG Electronics Inc. FCC ID: BEJGT8310C 1. Press (REVIEW) key 2. Press or key to enter your area code. The number appear on the display as you press the dial keys. If you make a mistake, press DEL KEY, and re-enter the local code. 3. Press (REVIEW) key 4. Enter 2nd local code. GT-8310C has 6 local codes. Repeat 1~4 commands to enter other local coldes. STEP 10. SELECTING YOUR LANGUAGE You can choose between two different languages, English or Spanish. The screen SELECT LANGUAGE appears. SELECT LANGUAGE
ENG ESP FRE 1. Press (REVIEW) key 2. Press or key to set SELECT LANGUAGE to enter ENG or ESP or FRE STEP 11. Adding More units If you subscribe to call waiting ID and this is first call waiting ID unit (the display appears as 1ST CWID UNIT?), you must select "YES". However, if you already have a call waiting ID unit, you must select "NO". If you do not program this option correctly, you might not receive call waiting ID records consistently. 1. Press (REVIEW) key 2. Press or key to set 1ST CWID UNIT to YES or NO. STEP 12. Turning on Callwaiting ID If you subscribe to CALL WAITING ID, turn this position ON 1. Press (REVIEW) key 2. Press or key to set CALL WAITING ID to ON or OFF. Setting this feature does not subscribe or cancel CALL WAITING ID service. You must contact your local telephone company to request a change in services. Report # EUT User manual CALL WAITING ID
ON OFF FCC Part 15 Subpart C Test Report 1ST CWID UNIT?
YES NO Page 22 of 22 LG Electronics Inc. FCC ID: BEJGT8310C STEP 13. ANSWER PHONE WHEN PICKED UP There are two ways that the GT-8310C can answer a call. The GT-8310C can instantly answer incoming calls when you remove it from the cradle, or the phone can be set to answer after pressing the TALK key. 1. Press (REVIEW) key 2. Press or key to set AUOT ANSWER to ON or OFF. AUTO ANSWER
ON OFF If you set AUTO ANSWER to ON, GT-8310C automatically answer incoming calls when removed from the cradle and also you could press any key to connect after incoming calls. If you set AUTO ANSWER to OFF, Press only TALK key before answering incoming calls . STEP 14. SET RING ON or OFF If you don't need to hear the ring sound and select RING ON or OFF
. 1. Press (REVIEW) key RING
ON OFF 2. Press or key to set RING to ON or OFF. STEP 15. ADJUSTING THE CONTRAST 1. Press (REVIEW) key 2. To lighten the display, press key while also pressing
key repeatedly until you get the desired results. CONTRAST To darken the display, press key while also pressing key repeatedly until you get the desired results. STEP 16. COMPLETED SETUP Once you have finished installing your GT-8310C, Your phone appears READY on the screen STEP 17. SELECTING TONE/PUSE (T/P SWITCH) DIALING
* If your home is equipped with touch-tone dialing service, set the T/P switch T(TONE) on the base.
* If you only have rotary(pulse) dialing service, set the T/P switch P(PULSE) on the base. SETUP COMPLETE Report # EUT User manual Page 23 of 23 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C USING YOUR PHONE You can make calls many different ways with the GT-8310C. DIALING 1. Press TALK key on the handset. 2. Use the number pad to dial the phone number. The phone number appears on the display as you enter the number. You also hear beeps for each digit as you dial. 3. Listen for a connection. 4. Press TALK to end your call. REDIALING Redial is a really fast method of calling your last number. Redial dials the last number you called whether you dialed it manually, or it was from a Call Record or the memory list. For more information on dialing from call records, See Dialing From Call Records on page 17. Redial is two-ways with the GT-8310C
* 1ST method: Press TALK and press RE/PA
* 2nd method: Press RE/PA key, your phone is automatically connected and redialed USING SPEED DIALING Another short cut for dialing is using speed dialing. First, create a speed dial list, as described in Creating Speed Dialing List on page 14. Then:
DIRECTORY 01 5556667777 SMITH JOHN 1. Press MEMO key. It displays " DIRECTORY "
2. Press or (REVIEW) key and it displays " NAME and NUMBER " in MEMEORY. 3. Press TALK to dial The phone automatically dials out whatever is shown on the display. USING FLASH To access your custom calling services, like Call Waiting, while you are on the telephone, press FLASH key. Report # EUT User manual Page 24 of 24 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C USING PAUSE If you want to add a three-second pause to number in your speed dialing list, press RE/PA key while creating the speed dial entry. For example, if you had a memory location dedicated to your voice mailbox, you might want add a pause in a dialing string for your PIN number. For more information about programming speed dialing numbers, see Creating a speed Dialing List on page 14. FINDING CLEAR RECEPTION Your GT-8310C automatically selects 1 of 20 channels at the beginning of the call for the best reception. REACHING MAXIMUM RANGE The GT-8310C handset and base communicate up to a certain maximum range. Weather, power lines, or other cordless telephones can affect this distance. The GT-8310C beeps whenever you are on the phone and the handset moves out of range from the base. If you do not move back within range in 30 seconds, you lose your connection. CREATING A SPEED DIALING LIST (H/S) In addition to your Call Records, you can store up to 20 speed dial names and numbers in memory. You can either enter name and number, or you can transfer a Call Record into your speed-dialing list. MANUAL METHOD 1. Press MEMO KEY at the 'READY' message. DIRECTORY 2. Press " PGM " key to edit a character and number. 3. It displays like this. The cursor is blinking on the name field. 4. Enter the name, character by character. You can have up to 21 characters in the name field,(The 3'rd Line) DIRECTORY ADRESS 01 5 5 5 5 5 5 5 NUMBER FIELD NAME FIELD a. Locate the character on the dialing keys 2 through 9. b. Press once to enter the first character, twice for the second character, etc. For example, to choose a P, press PQRS7 once, but to select an S, press PQRS7 four times. c. Use the or (REVIEW) Keys to move back and forth through the name. Use the or keys to move up and down. SMITH JOHN Report # EUT User manual Page 25 of 25 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C d. Create a space between names or words, by pressing the (REVIEW) key twice after the last character. e. Special Symbols You can also use the 1 key to get the following symbols in the name field:
& ( ) . 1 5. Enter the telephone number, area code first, using the dialing key pad. (2'nd Line number field) You can have up to 32 digits in the number field. If you make a mistake entering the telephone number, you must:
a. Press PGM key to leave speed dialing list. b. Press PGM key to enter the speed dialing list again. c. Or, Use the or (REVIEW) keys to find the digit and press DEL key and re-enter the telephone number and the name. 6. Press MEMO key to store the complete record. The phone gives you a confirmation tone to let you know that the record is stored. CALLER ID METHOD A quick way to add to your speed dial list is to copy a Caller ID Call Record. At THE 'READY' screen:
NUMBER STORED 1. Locate the Call Record that you want to copy using or (REVIEW) keys. 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 SMITH JOHN 2. Press MEMO key. You now see some of the information from the Call Record and displays "NUMBER STORED" and displays call record again. 3. The number of the memory location automatically is entered. NUMBER STORED Report # EUT User manual Page 26 of 26 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C DELETING SPEED DIALING NUMBERS You can erase unwanted speed dial numbers one-at-a-time. 1. Press MEMO key to see your speed dial list. 2. Use or (REVIEW) key to find the memory location you want. 3. Press DEL key once, and the GT-8310C asks if you want to delete this entry. 05 1 8 8 8 6 6 6 5 5 5 5 DELETE?
4. Press DEL key again to delete the speed dial number. The GT-8310C clears the number, gives you a confirmation beep If you do not wish to delete the number, press MEMO key to cancel. ADJUSTING THE HANDSET VOLUME 1. Press TALK key 2. Press the or key to increase or decrease the VOLUME. The handset sounds an error tone when it reaches the upper or lower limits. ADJUSTING HANDSET RINGER VOLUME Press the or key on the handset while the phone is not in-use. You hear the sound of the ringer as you adjust the volume between the two levels. ADJUSTING BASESET RINGER VOLUME Press the or key on the handset while the phone is not in-use. You hear the sound of the ringer as you adjust the volume between the two levels. USER SLECTABLE RINGER TONES (H/S) There are four user-selectable ringer tones available for this handset. 1. While in the Stand-by mode, press the FLASH button 2. Press a key (1 to 4) to select a ringer tone mode. USER SLECTABLE RINGER TONES (B/S) There are five user-selectable ringer tones available for this handset. 1. While in the Stand-by mode, press the FLASH button 2. Press the RING button(continuously) to select a ringer tone mode. Report # EUT User manual Page 27 of 27 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C THE INTEGRATED ANSWERING DEVICE TURNING THE ANSWERING SYSTEM ON/OFF 1. To turn the answering system on, press OUT DOOR. A tone sounds. Then, the OUT DOOR button is lighted. 2. Turn the answer system off. Press OUT DOOR again, then, light turns off. SETTING THE CLOCK To set the correct time:
1. Press PROGRAM button. 2. Press TIME (7 digit) button 3. Press number key to input day. 1: Sunday 2: Monday 3: Tuesday 4: Wednesday 5: Thursday 6: Friday 7: Saturday 4. Press number keys to input current hour. (0~23) 5. Press number keys to input current minute. (0~59) Then the GT-8310C Answering System announces the correct time. To listen to current time, press TIME button or press CONFIRM button and TIME button. Then answering system announces the time. SETTING ALARM TIME If you set alarm time, GT-8310C sounds alarm at your setting time in everyday. 1. Press PROGRAM button. 2. Press ALARM(9) button. 3. Press number keys to input hour (0~23). 4. Press number keys to input minute (0~59). The system announces your setting time. If you want alarm function to set, press ALARM button in stand-by mode. Alarm LED is lighted in baseset. If you want alarm function to release, press ALARM button again. Alarm LED is OFF. To review alarm time, press CONFIRM button and press ALARM button. Report # EUT User manual Page 28 of 28 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C RECORDING YOUR OUTGOING MESSAGE When you receive a call, the answering system automatically plays either a present greeting, or your own personal greeting. Present Message The following message is pre-recorded Hello, I cannot receive your call, please leave your message after a beep. Thank you. Recording your personal Outgoing Message (OGM) 1. Press RECORD key in stand-by mode. The answering system announces explanation and LED counts recording time. Record your message. (MAX 20 sec) 2. When you finish recording your message, press / (play/stop) button A tone sounds. Your message plays back your review. CHOICE BETWEEN THE PRE-RECORDED GREETING AND YOUR PERSONAL GREETING 1. Press OUT DOOR button. The answering system announce choosing OGM. 2. To choose your personal outgoing message, press 1 button. To choose pre-recorded outgoing message, press 3 button. The answering system announces your selecting OGM. SETTING THE RING TIME 1. Press PROGRAM button 2. Press RECORD button 3. Press number button (2~9) TOLL SAVE In the TOLL SAVE is ON, if you have new message, the answering system answers after one ring. If there are no new messages, the system answers after four rings. This way, when you call long distance to check your messages, and have no message, you can hang up after the second ring to save a charge. SETTING A PIN CODE To listen to your messages from a remote location, you will need to enter a four digit Personal Identification Number
(PIN) code (0000~9999) 1. Press PROGRAM button. 2. Press OUT DOOR button. 3. Press PIN code (4 digit) Report # EUT User manual Page 29 of 29 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Your PIN code plays back for your review. To review your PIN code, press CONFIRM button and press OUT DOOR button. PLAYING YOUR MESSAGE The base 7-segment LED displays the total number of messages. 1. Press / (play/stop) The system announces messages. 2. After reviewing our new messages, you can review your old messages. Press / (play/stop) and 9 or : to review old messages. SKIPPIN G A MESSAGE 1. Press / (play/stop) to review your messages 2. Press : at anytime to skip to the next message. 3. Press / (play/stop) at any time to stop reviewing your messages and return to stand-by mode. DELETING MESSAGES 1. 1. Press / (play/stop) to review your messages. 2. If you decide to delete a message, press ERASE (2) button. The system goes to the next message. To delete all you messages, press ERASE button and press CONFIRM (#) button in stand-by mode. RECORDING A VOICE MEMO The Voice Memo function allows the user to record a message on the base for others who use your phone. 1. Press MEMO button. System announces how to use. Record your message. 2. When you have finished your message, press / (play/stop). The system returns to stand-by mode. REMOTE ACESS AWAY FROM HOME You can access functions such as checking recorded messages, playing or deleting messages, and room monitoring remotely using a touch-tone phone. 1. Call you telephone number. 2. While the outgoing message is playing, press # button, and press your PIN code. 3. You select a command from the following chart:
Delete all messages Play Room Monitor Stop Delete (while announcing) Remote control off 0 then 0 (confirm) then 5 (cancel) 2 4 5 0 9 When you select Room Monitor, it is continuous about 10 seconds. When you finish, the answering system automatically returns to stand-by mode. Report # EUT User manual Page 30 of 30 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C USING CALLER ID AND CALL WAITING ID One of the best features of your phone is Caller ID, which allows you to see information about an incoming call before you pick up the phone. With Caller ID service from your local telephone company, the GT-8310C telephone displays and records information about the call in a log. Possibly even better than Caller ID is Call Waiting ID. In addition to providing normal Caller ID information, Call Waiting ID allows you to see caller information while you are on a call. Now you can have the information you need to choose whether or not to answer a waiting call. Before you use these features on your GT-8310C telephone, you must first subscribe to the services through your local telephone company, and set "CALL WAITING ID ON or OFF" correctly during the SETTING UP YOUR PHONE procedure. For more details on CALLWAITING ID ON/OFF, see STEP 10. Turning on Callwaiting ID on page 10. RECEIVING NEW CALLS When you receive a new call, the information is stored under CALLER area. When you press or (REVIEW) key , it tells you:
m How many total calls you have. m How many new calls you have since you last reviewed your calls. When you receive a call, the GT-8310C displays the caller information sent by the Telephone Company, called a Call Record. The call record consists of the following information:
mm The caller's name( If available ) mm The caller's telephone number m The time and date of the call m A call record number m NEW CALL LCD display m MESSAGE WAITING (VOICE MAIL) indicator
)) MESSAGE WAITING 10 : 35 PM 10 / 25 25 5 5 5 5 5 5 5 SMITH JOHN ALL : 23 NEW : 03 NEW Report # EUT User manual Page 31 of 31 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C REVIEWING CALL RECORDS To review a call Record:
1. Press or (REVIEW) to see how many new calls you have. 2. Use or (REVIEW) key to move though the Call Record list.
* Press (REVIEW) key to see the most recent call record.
* Press (REVIEW) key to see earlier calls. When you reach either end of the Call Record list, you see an 'END OF LIST' message. If you continue to press or (REVIEW) key, you scroll through the list again. DIALING FROM CALL RECORDS You can use your Call Records as a short-cut method of dialing. END OF LIST 1. Press or (REVIEW) key to see your Call Records. 2. Use or (REVIEW) key to find the desired Call Record. 3. Press TALK key, The phone dials whatever is shown on the display. SAVING CALL RECORDS Your phone stores up to 60 Call Records before the memory becomes full. When the next call comes in, the oldest record drops off and makes room for the new Call Records. To save specific calls, delete old and unnecessary call records to keep from filling your phone's memory. DELETING CALL RECORDS You can either delete a single record or you can delete all Call Records at one time. To delete a single record:
1. Press to or (REVIEW) key to see your Call Records. 2. Use or (REVIEW) key to find the desired Call Record. 3. Press DEL key once, and the GT-8310C asks if you want to erase this Call Record. 4. Press DEL key again to erase the Call Record. The GT-8310C deletes the Call Record, gives you a confirmation beep. Report # EUT User manual Page 32 of 32 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 DELETE?
FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C To delete all Call Records:
1. Press or (REVIEW) key. The display shows you how many call records you have. 2. Press DEL key and the GT-8310C asks you want to delete all Call Records. 3. Press DEL key again and the GT-8310C clears all Call Records, gives you a confirmation beep. ALL: 23 NEW: 03 DELETE A LL?
SEEING LONG RECORDS If you receive long records on caller ID information, you could see that to use the or key. the or key allows you to scroll back and forth to see long records. 1. Press or (REVIEW) key. The display shows you long records 2. Press or key to see remain numbers 10 : 35 PM 10 / 25 CALL 25
55566677778902 SMITH JOHN 10: 35 PM 10 / 25 CALL 25 44455566677778 SMITH JOHN Report # EUT User manual Page 33 of 33 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C VOICE MAIL Voice Mail Serves your calls when you are away from your phone or even while you are on the phone. The indicator Light flashes whenever you have message in your mailbox. And once you have programmed your Voice Mail key with your personal access codes, you can get your message at the touch of a button. You must subscribe to Voice Mail Service in order for this feature on your phone. To Program the Voice Mail Key Using this method, you can store up to 32 digits per key-You can program digits, flash, pause, * or #, such as your mailbox number, your PIN, and any other additional codes that you need. 1. press MEMO key 2. press VOICEMAIL key 3. press PGM key VOICE MAIL and then you will see the following display, The 2nd line cursor(Number field) is blinking. 4. You can store digits, # , * , Flash , Pause up to 32 digits 5. press PGM key to cancel 6. Press MEMO key to store To Use Voice Mail Once you have programmed your Voice Mail key, you can access your mail box by pressing l VOICE MAIL key. Not to use Voice Mail If you are not subscribing to a voice mail service from your local telephone comp any and you set VOICEMAIL to OFF in Set up Program mode, The GT-8310C automatically change your voice mail key into Speed dial key. To Program the SPEED DIAL Key. Using this method, you can store up to 32 digits per key-You can program digits, flash, pause, * or #, such as your mailbox number, your PIN, and any other additional codes that you need. VOICE MAIL ON OFF 1. press MEMO key 2. press VOICEMAIL key 3. press PGM key and then, you will see the following display, The 2nd line cursor(Number field) is blinking. VOICE MAIL You can store digits, # , * , Flash , Pause up to 32 digits 4. press PGM key to cancel 5. press MEMO key to store To Use SPEED DIAL Once you have programmed your SPEED DIAL key, you can access by pressing l VOICE MAIL key. Report # EUT User manual Page 34 of 34 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C READING DISPLAY MESSAGES The GT-8310C informs you of status by displaying the following messages :
Message Display ALL: 23 NEW: 03 CHARGING DELETE ALL?
10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 DELETE ?
END OF LIST ALL CALLS & NEW CALLS: This message lets you know how many call records you have, and how many of those call records are new, In this example, you have 23 call records, and 3 new calls. CHARGING: The handset BATTERY is getting low. Place the handset in the base in order to recharge. DELETE ALL?: You pressed the DEL key after pressing the or (REVIEW) key DELETE ? : To delete a single record, You pressed DEL key after pressing the or (REVIEW) key. END OF LIST: You have reached the end of the call records. Press either or (REVIEW) key to see other records. INCOMPLETE DATA : The message sent is incomplete data This message usually indicates temporary interference. There is no problem with the phone. MESSAGE WAITING : The GT-8310C (base LED) flashes slowly to alert you and appears on the display Message waiting When you receive new messages in your mail box. NO CALLS:
There are no call records in the caller ID memory. INCOMPLETE DATA
)) MESSAGE WAITING NO CALLS Report # EUT User manual Page 35 of 35 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Message Display NUMBER ONLY:
Either name service is not available in your area, or you are subscribing to a number-only service. PRIVATE: The caller has purposely chosen to block his/her phone number. TALK:
The handset is on and ready for you to dial. PAGING :
The Base is calling the handset. UNAVAILABLE: The Caller ID information, such as the name, or both the name and number, might not be available from the callers area. LONG DISTANCE : The message sent is a long distance call. You might see this message alternate with other messages. LOW BATTERY :
The handset is needed to replace the cradle. 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 10 : 35 PM 10 / 25 CALL 25 P R I V A T E T A L K PAGING 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 UNAVAILABLE 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 SMITH JOHN 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 LONG DISTANCE LOW BATTERY Report # EUT User manual Page 36 of 36 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C Message Display OUT OF RANGE:
If you use the handset too far away from the base unit during a call, the handset will alert you by audio warning beeps
(when using talk) and OUT OF RANGE appears on the display. NUMBER STORED : When you save the call records in the directory or create a speed dialing list, you will see the display like this. Forwarded CALLS : The message sent is a forwarded calls. You might see the 3 type messages alternate with other messages. NEW CALL: This message lets you know that you have a New messages OUT OF RANGE NUMBER STORED 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 SMITH JOHN 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 CFW. UNIVERSAL 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 CFW. BUSY 10 : 35 PM 10 / 25 CALL 25 5 5 5 5 5 5 5 CFW. NO ANSWER NEW READY Report # EUT User manual Page 37 of 37 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C TROUBLESHOOTING Are you having trouble with your phone?
Here are some of the most common problem areas and solutions. SYMPTOM CORRECTIVE ACTION No dial tone * Verify that the line cord is connected and secure.
* Check to see that you are not out of range to the base.
* Check that the AC adapter is plugged into the outlet.
* Check that the handset is fully charged.
* Check to see that the Battery is connected inside the battery compartment. Phone doesnt * Verify that the LINE CORD and AC adapter are plugged in correctly. ring * Check that the RING ON/OFF in your set up program mode.
* Determine if you have too many communication devices hooked to a single line. A communication device can be a phone, modem, or facsimile (FAX) machine. Contact your local phone company business office for help calculating the limit for yo your residence or business.
* Move the handset closer the base The phone has * Check to see that you are not out of range to the base. Static or fades * Check that the handset is fully charged. In and out Caller ID / * Verify that the CALLWAITING ID function is set correctly Call Waiting ID See Step Turning CALLWAITNG ID ON or OFF on SETUP program doesnt work * Check your service. Call your local phone companys Business Office to ensure properly that your services are active.
** Check for a power outage in your home area
** Check the AC adapter
** Check that the extension phone is being used. Charge Light ** Check whether the handset is making contact in the cradle. does Not work ** Check the AC adapter Be sure that the adapter is not damaged and that it is securely plugged into a working outlet. Also check that the wall plug is not controlled by a wall switch. Phone does not ** You might not have programmed your area code correctly. when using call Please see Set up program my Area Code dial out correctly when using call records Report # EUT User manual Page 38 of 38 FCC Part 15 Subpart C Test Report LG Electronics Inc. FCC ID: BEJGT8310C SYMPTOM CORRECTIVE ACTION Blank or fainl ** Check the contrast control for the display screen see set up your program
** Check the AC adopter Be sure that the adapter is not damaged and that it is securely plugged into a Working Outlet and the phone jack. Also check that the wall plug is not controlled by a wall switch or a power strip.
** You might not have received your first call record. NO DATA ** Check your service. Call your local phone company to ensure that you have Caller ID or Call Waiting ID service.
** Check the answering machine. Ensure that your answering machine is set to answer after two rings.
** You answered the call before two rings.
** Check call Forwarding. Ensure that Call Forwarding is turned off.
** Contact your local phone companys Service Department If the problem continues for more than 24 hours. Your local phone company central office may be temporarily experiencing an overload. INCOMPLETE DATA ** Call information was distorted before reaching the unit. Normal static on the telephone line can cause a line error and an INCOMPLETE DATA message. If this condition persists, check with your local telephone company to ensure that there is not a problem with your phone line. Handset does not ** Check that the AC adapter is plugged in and operating correctly. Charge. ** Check whether the handset is making contact in the cradle. PAGE key does ** The handset is not communicating with the base. not page The handset is either turned off, out of range, or the battery needs recharging. the handset Handset does not ** Check the AC adapter. Be sure that the adapter is not damaged and that work it is securely plugged into a working Outlet and the phone jack. Also check that the wall plug is not controlled by a wall switch or a power strip.
* Verify that the handset is turned on
** place the in the cradle for several seconds. Ensure the handset is making contact in the cradle.
** Recharge the battery. Report # EUT User manual FCC Part 15 Subpart C Test Report Page 39 of 39
This product uses the FCC Data API but is not endorsed or certified by the FCC