| submitted | available | document details (if available) | source link |
|---|---|---|---|
| 1,MFL70260204, mac Acrobat Distiller 10.0.0 (Macintosh) |
| various | Users Manual | Users Manual | 4.46 MiB |
1,MFL70260204, 17. 12. 20. 1:51 Page 1 Installation Guide/User's Guide T R K E M A L T I S L O V E N N A I S L O V E N N A I I L A T V E U V A L O D A I L I E T U V K A L B A G A E I L G E P O R T U G U S M A G Y A R K N S R P S K I H R V A T S K I S V E N S K A N O R S K E N G L I S H I T A L I A N O E S P A O L F R A N A S I D E U T S C H E T N A I N E D E R L A N D S P O L S K I L I M B A R O M N Be sure to read the "Safety Precautions" before using the product. Keep this manual in a place where anyone who uses the product can see it. Please be careful when using this product and check it has not been altered in any way beyond its default state to prevent the occurance of accidents Model Type: Wi-Fi Modem (WLAN Dongle) P/NO : MFL70260204 www.lg.com Copyright 2017 LG Electronics Inc. All Rights Reserved. S H Q P I S U O M I S L E N S K A B O S A N S K I D A N S K E E S T I K E E L 1,MFL70260204, 17. 12. 20. 1:51 Page 2 TABLE OF CONTENTS E N G L I S H Thank you for using our air conditioner featuring the LG SmartThinQ application. Please only operate after reading the user guide to en-
able a more trouble free, prolonged operation BEFORE USE OR INSTALLATION Safety Precautions Precautions for Wi-Fi Modem Installation Note 3 3 4 4 5 WI-FI MODEM INSTALLATION 5 5 6 8 9 10 11 12 13 14 15 16 APPLICATION INSTALLATION 16 16 18 CHECKLIST BEFORE REPORTING Components USB Extension Cable (Sold Separately) Model: PWYREW000 1Way/2Way Ceiling Cassette 4Way Ceiling Cassette Commercial Ceiling Type Console Type Commercial Standing Type Floor-mounted Type Ceiling Flush Duct Air-to-Water Heat Pump Split type LG SmartThinQ Application Installation Note FAILURE Smartphone Wi-Fi Settings Checklist Before Reporting Failure 18 19 20 SPECIFICATIONS 20 21 NOTICE 21 22 24 FCC Certification IC Certification Wireless LAN module specifications Open source software notice information 2 1,MFL70260204, 17. 12. 20. 1:51 Page 3 BEFORE USE OR INSTALLATION E N G L I S H Safety Precautions WARNING The following safety precautions are intended to prevent unfore-
seen hazards or damage in advance by using the product safely and correctly.
!
Failure to observe these instructions could result in death or seri-
ous injury.
!
Failure to observe these instructions could result in personal in-
jury or property damage. CAUTION WARNING
!
When installing Please contact a service center or installation shop to install the product.
- It may cause fire, electric shock, explosion or injury. Please contact a service centre or industry professional to in-
stall this product
- It may cause fire, electric shock, explosion or injury. Do not disassemble, repair or modify the product.
- It may cause fire or electric shock. When using Do not place a heating device near the product.
- It may cause fire. Do not spill water inside the product.
- It may cause electric shock or failure. Do not direct an electrical short circuit to this product
- Giving a shock to the product may cause malfunction. Do not damage the product with a sharp and pointy object, etc.
- It may damage the parts and cause failure. CAUTION
!
When using Do not clean with strong solvent-based detergent. Use a soft cloth.
- It may cause fire or product deformation. Do not touch with wet hands or pull the connecting cable.
- It may cause electric shock or failure. 3 1,MFL70260204, 17. 12. 20. 1:51 Page 4 BEFORE USE OR INSTALLATION E N G L I S H Precautions for Wi-Fi Modem Installation It must be installed by a professional installer. The wireless router should be installed within 10 meters. It is recommended to be installed near the product. Install in a place free from electromagnetic interference. It may cause malfunction of the product. If there is a wall or obstacle between the Wi-Fi modem and the wireless router, communication issues may occur If it is attached to steel structures such as H beams, steel plates, indoor cabinets, etc., communication issues may occur Depending on the installation situation, use a 10m extension cable
(sold separately), but do not connect more than 10m. Do not install the product in a place with high temperature or hu-
midity such as a kitchen or bathroom. Install at least 1cm away from the metal panel. Note
* Depending on your smartphone, some functions may not work.
* An environment of Android 4.1.2, iOS 9.1.1 or a later version is recommended for the use of the application.
* The environment for the use of the application is subject to change for usability/design improvement and content enhance-
ment.
* It may not work on a tablet. 4 1,MFL70260204, 17. 12. 20. 1:51 Page 5 WI-FI MODEM INSTALLATION E N G L I S H Components Installation Parts Installation Equipment Name Quantity Appearance Appearance Name Driver Wi-Fi Modem USB Cable
(60cm) Extension Cable (50cm) Manual Double-sided Tape 1 1 1 1 2 USB Extension Cable (Sold Separately) Model: PWYREW000 Name Quantity Appearance USB Extensio n Cable
(10m) 1 Use a USB extension cable depending on the installation environ-
ment. USB extension cable includes ferrite core. 5 1,MFL70260204, 17. 12. 20. 1:51 Page 6 E N G L I S H WI-FI MODEM INSTALLATION 1Way/2Way Ceiling Cassette 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Connect the Wi-Fi modem to the USB cable. 5. Refer to the image below to install the Wi-Fi modem in the marked position. Wi-Fi Modem USB Cable Control Box Cover Control Box Indoor Unit PCB CN_WF CN_WF
<Installation Example>
6 1,MFL70260204, 17. 12. 20. 1:51 Page 7 WI-FI MODEM INSTALLATION E N G L I S H Mounting position of the 1way cassette Wi-Fi modem Connect and install using the included USB extension cable
(50cm) according to the length of the product. Mounting position of the 2way cassette Wi-Fi modem 7 1,MFL70260204, 17. 12. 20. 1:51 Page 8 E N G L I S H WI-FI MODEM INSTALLATION 4Way Ceiling Cassette 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Connect the Wi-Fi modem to the USB cable. 5. Install the Wi-Fi modem on the flat ceiling near the indoor unit or on the corner of the indoor unit panel. (Use the included double-
sided tape to fix it in place.) Control Box Cover Wi-Fi Modem USB Cable Control Box Indoor Unit PCB CN_WF CN_WF CN_WF CN_WF Ceiling Ceiling Ceiling 100mm 100mm 100mm Ceiling 100mm
<Installation Example>
8 1,MFL70260204, 17. 12. 20. 1:51 Page 9 WI-FI MODEM INSTALLATION E N G L I S H Commercial Ceiling Type 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN-WF). 4. Connect the Wi-Fi modem to the USB cable. 5. Refer to the image below to install the Wi-Fi modem in the marked position of the indoor unit side cover. (Use the included double-sided tape to fix it in place.) Wi-Fi Modem USB Cable CN-WF CN-WF CN-WF
<Installation Example>
9 1,MFL70260204, 17. 12. 20. 1:51 Page 10 WI-FI MODEM INSTALLATION E N G L I S H Console Type 1. Check if the power of indoor unit and the power of outdoor unit are off as well. 2. Open the control box of indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Connect Wi-Fi modem to the USB cable. 5. Referencing the following figure, install Wi-Fi modem at the marked position on the front panel of indoor unit (Use the in-
cluded double-sided tape to fix the modem). 6. Fix the USB cable by hanging at the marked position. CN_WF Wi-Fi Modem USB Cable
<Installation Example>
10 1,MFL70260204, 17. 12. 20. 1:51 Page 11 WI-FI MODEM INSTALLATION E N G L I S H Commercial Standing Type 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Connect the Wi-Fi modem to the USB cable. 5. Install the Wi-Fi modem on the Wi-Fi fixing unit at the bottom of the indoor unit.
(Use the included double-sided tape to fix it in place.) Control Box Indoor Unit PCB Wi-Fi Modem USB Cable CN_WF CN_WF CN_WF Installation Plan 1 Installation Plan 2
<Installation Example>
Installation Plan 1. Install on the fixing structure at the bottom of the Installation Plan 2. Install on the top of the product. control box.
(Accessories need to be purchased separately on site where extension is required.) 11 1,MFL70260204, 17. 12. 20. 1:51 Page 12 E N G L I S H WI-FI MODEM INSTALLATION Floor-mounted Type 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the front panel and the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Connect the Wi-Fi modem to the USB cable. 5. Refer to the <Installation Example> below to install the Wi-Fi modem.
(Use the included double-sided tape to fix it in place.) Control Box Cover Wi-Fi Modem USB Cable Control Box Indoor Unit PCB CN_WF CN_WF CN_WF Ceiling 100mm
<Installation Example>
12 1,MFL70260204, 17. 12. 20. 1:51 Page 13 E N G L I S H WI-FI MODEM INSTALLATION Ceiling Flush Duct 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Use an extension cable to match the distance between the ceiling tile. 5. Connect the Wi-Fi modem to the USB cable. 6. Attach the Wi-Fi modem to the ceiling tile.
(Use the included double-sided tape to fix it in place.) Control Box Indoor Unit PCB CN_WF CN_WF Control Panel USB Cable Wi-Fi Modem
<Installation Example>
13 1,MFL70260204, 17. 12. 20. 1:51 Page 14 WI-FI MODEM INSTALLATION E N G L I S H Air-to-Water Heat Pump Split type 1. Check if the indoor unit is turned off and the power of the outdoor unit is turned off. 2. Open the front panel and the control box of the indoor unit. 3. Connect the USB cable to the indoor unit PCB (CN_WF). 4. Use an extension cable that reaches to the location where you want to install the Wi-Fi modem. 5. Connect the Wi-Fi modem to the USB cable. 6. Attach the Wi-Fi modem to a wall or ceiling near the router.
(Use the included double-sided tape to fix it in place.) CN_WF Indoor Unit PCB Control Panel USB Cable Wi-Fi Modem
<Installation Example>
14 1,MFL70260204, 17. 12. 20. 1:51 Page 15 WI-FI MODEM INSTALLATION E N G L I S H 15 1,MFL70260204, 17. 12. 20. 1:51 Page 16 E N G L I S H APPLICATION INSTALLATION LG SmartThinQ Application Installation Search and install "LG SmartThinQ" from the Google Play Store or iOS App Store on your smartphone. Refer to the help in the application for how to use "LG Smart-
ThinQ" in detail. Note The Wi-Fi only supports 2.4 GHz radio frequency. If the router's security method is WEP, product registration may not be possible. Change the security method of the router (WPA2 recommended) and register the product. When registering the product, be sure that the Wi-Fi function of your smartphone is turned on. The wireless router and Internet connection line are separate items required for the use of the application and must be installed separately. You may contact your Internet service provider or install the wire-
less router yourself to use the wireless network. When you install the wireless router yourself, be sure to refer to the manual that comes with the router. Install the wireless router close to the product. Depending on the installation location or distance between the product and the wire-
less router, the difference in the signal strength of the wireless network may occur, and the time taken to transmit and receive data may differ. It may not be connected depending on the network environment. If you cannot connect it or have trouble setting up the network, please contact your network administrator or Internet service provider. 16 1,MFL70260204, 17. 12. 20. 1:51 Page 17 APPLICATION INSTALLATION E N G L I S H The wireless router's SSID (the name of the wireless router that appears when searching for Wi-Fi) must be set to an English, nu-
meric or alphanumeric combination. We do not recommend using Korean letters (Hangeul) or special characters because the informa-
tion is not sent to the product modem properly and connection may not be established smoothly. When connecting to the wireless network, not only the wireless router that you use but also other users' wireless routers used nearby may be searched. Using other users' wireless routers is ille-
gal and may result in legal penalties when caught. Be sure to con-
nect to a wireless router that you are permitted to use to use the network. The contents of this manual may differ depending on the version of
"LG SmartThinQ" application, and some changes may be made without notice to the user. Features provided may vary by model. The accumulated power before Wi-Fi installation is not displayed. 17 1,MFL70260204, 17. 12. 20. 1:51 Page 18 E N G L I S H CHECKLIST BEFORE REPORTING FAILURE Smartphone Wi-Fi Settings NOTE
!
To register the product, set the following items to off in Wi-Fi gen-
eral settings and advanced settings. Please be aware that the ex-
pressions in the settings may differ depending on the manufacturer of your smartphone. Automatically Switch to Mobile Data If you cannot use the internet with Wi-Fi, use the Internet with your mobile data plan. Cancel Connection to Wi-Fi with Weak Signal If the currently-connected Wi-Fi signal is weak, the device cancels the connection and tries to connect to another Wi-Fi or mobile network. Pass Point Connect automatically to the Wi-Fi that sup-
ports Pass Point. Disconnect Wi-Fi with Weak Signal When the signal is weak, it tries to connect to another Wi-Fi or data network. Connection Failure Prevention Do not use Wi-Fi networks that are not properly-
connected to the Internet. Smart Network Switching While using this feature, it will auto-
matically connect to your mobile net-
work when your Wi-Fi connection is not good. Additional charges may apply, depending on the data plan. On Off Cancel 18 1,MFL70260204, 17. 12. 20. 1:52 Page 19 CHECKLIST BEFORE REPORTING FAILURE Checklist Before Reporting Failure Symptoms Checklist Actions E N G L I S H The air condi-
tioner is not connected on the LG Smart-
ThinQ applica-
tion. The device is not registered on the air con-
ditioner. Is the power of the air conditioner dis-
connected?
Connect the power of the air conditioner. Is the wireless router Turn on the router. connected to the air conditioner turned off?
Is the distance be-
tween the air condi-
tioner and the wireless router too far?
Is the wireless router normal?
Move the wireless router closer to the air conditioner. There are routers that only service the sub-
scribers for each telecommunications carrier. If it is an old router, contact your service provider and re-
place it with a new one. 19 1,MFL70260204, 17. 12. 20. 1:52 Page 20 E N G L I S H SPECIFICATIONS Open source software notice information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-
ROM for a charge covering the cost of performing such distribution
(such as the cost of media, shipping, and handling) upon email re-
quest to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this infor-
mation. 20 1,MFL70260204, 17. 12. 20. 1:52 Page 21 FCC Certication NOTICE E N G L I S H FCC Notice (For transmitter module contained in this product) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including in-
terference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. 21 1,MFL70260204, 17. 12. 20. 1:52 Page 22 NOTICE E N G L I S H IC Certication Industry Canada Statement (For transmitter module contained in this product) This device complies with Industry Canadas applicable licence-ex-
empt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) be-
tween the antenna and your body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIP-
MENT. Avis dIndustrie Canada (pour le module de transmission compris dans e produit) Cet appareil est conforme aux normes CNR dIndustrie Canada ap-
plicables aux appareils radio exempts de licence. Son fonction-
nement est sujet aux deux conditions suivantes :
1) Cet appareil ne doit pas provoquer dinterfrences, et 2) Cet appareil doit accepter toutes les interfrences, y compris celles pouvant entraner son dysfonctionnement. 22 1,MFL70260204, 17. 12. 20. 1:52 Page 23 NOTICE E N G L I S H nonc dIC concernant lexposition la radiation Cet appareil est conforme aux limites dexposition aux rayon-
nements dIndustrie Canada pour un environnement non contrl. Cet appareil doit tre install et utilis de faon garder une dis-
tance minimale de 20 cm (7,8 po) entre la source de rayonnement et votre corps. REMARQUE : LE FABRICANT NEST PAS RESPONSABLE DES IN-
TERFRENCES RADIOLECTRIQUES CAUSES PAR DES MODIFI-
CATIONS NON AUTORISES APPORTES CET APPAREIL. DE TELLES MODIFICATIONS POURRAIENT ANNULER LAUTORISA-
TION ACCORDE LUTILISATEUR DE FAIRE FONCTIONNER LAPPAREIL. 23 1,MFL70260204, 17. 12. 20. 1:52 Page 24 E N G L I S H NOTICE Wireless LAN module specications Model PCRCUDT3 Frequency Range 2412~2462 MHz Output Power (Max) IEEE 802.11b : 14.95 dBm IEEE 802.11g : 17.27 dBm IEEE 802.11n : 16.57 dBm Model LCW-005 Frequency Range 2412~2462 MHz Output Power (Max) IEEE 802.11b : 19.29 dBm IEEE 802.11g : 25.43 dBm IEEE 802.11n : 25.30 dBm 24 1,MFL70260204, 17. 12. 20. 1:52 Page 25 CE Certication NOTICE E N G L I S H Hereby, LG Electronics declares that the radio equipment type Wi-Fi Modem(WLAN Dongle) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service Center B.V. Krijgsman 1 1186 DM Amstelveen The Netherlands Wireless function S/W version : V 1.0 Wireless LAN module specifications Model LCW-005 Frequency Range 2412~2472 MHz Output Power (Max) IEEE 802.11b : 18.08 dBm IEEE 802.11g : 17.86 dBm IEEE 802.11n : 17.81 dBm 25 1,MFL70260204, 17. 12. 20. 1:52 Page 26 NOTICE E N G L I S H 26
This product uses the FCC Data API but is not endorsed or certified by the FCC