| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 10 2009 | Microsoft Word - 2. User Manual_LG-LG220C_.doc dragon2k Acrobat Distiller 7.0 (Windows) |
| various | Users Manual | Users Manual | 389.19 KiB | / December 10 2009 |
TFLG220CB Draft User Manual Date: February 28, 2009 LG Electronics Inc. Part 15.21 statement
" Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment. Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Part 15 Class B Compliance This device and its accessories comply with part15 of FCC rules. Operation is subject to the following two conditions:
(1) This device & its accessories may not cause harmful interference.
(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation. Body-worn Operation This device has been tested for typical body-worn operations with the distance of 0.79inches (2.0cm) from the users body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.79inches(2.0cm) must be maintained from the user's body. Additionally, Belt clips, holsters & other body-worn accessories may not contain metallic components. 1 Prepaid 1.1 Add Airtime Add Airtime allows you to start an over-the-air request for additional airtime.
[MENU] 1 1 1.2 Buy Airtime Buy Airtime allows you to start an over-the-air request for purchase additional airtime.
[MENU] 1 2 1.3 My Phone Number Phone Number displays the phone's programmed MSID or MDN.
[MENU] 1 3 1.4 Airtime Info Airtime Info displays the amount of airtime by the unit and due date information.
[MENU] 1 4 1.5 Airtime Display Airtime Display allows you to disable/enable the display of idle screen, prepaid-
related information.
[MENU] 1 5 1.6 Serial Number Serial Number simply displays the information of your phones MEID.
[MENU] 1 6 1.7 Code Entry Mode Code Entry Mode will allow the phone to accept Tracfone-related codes in order to add units, modify specific data and troubleshoot the phone. In using the Code Entry Mode, you can't receive incoming calls or use events alert.
[MENU] 1 7 2 Contacts The Contacts Menu allows you to store names, phone numbers and other information in your phones memory. 2.1 New Contact Allows you to add a new contact to your Contact List. 1. Press [MENU] 2 1. 2. Enter the name, then press Up/Down Navi Key. 3. Highlight the field you wish to store the contact information in. 4. Enter the phone number or e-mail address. 5. Continue adding the desired contact information to the entry. 6. When you are finished entering the desired contact information, press [OK] Save Key to save the entry into your Contact List. 2.2 Contact List Allows you to view your Contact List. 1. Press [MENU] 2 2. 2. Choose from the following options:
- Press Up/Down Navi Key to scroll through your Contacts alphabetically.
- Press Right Soft Key [Options] to select one of the following:
Send Message/ Delete/ Edit/Delete Multiple/
Send via Bluetooth/Set(Remove) Speed Dial
- Press [OK] View to view the contact's information.
- Press Left Soft Key [New] to store new contact information. 2.3 Groups Allows you to view your grouped Contacts, add a new group, change the name of a group, or delete a whole group. 1. Press [MENU] 2 3. 2. Choose from the following options:
- Use Up/Down Navi Key to highlight a group, then press [View] to view the contacts in the selected group.
- Press Left Soft Key [New] to add a new group.
- Use Up/Down Navi Key to highlight a group, then press Right Soft Key [Options]
to choose from the following options:
Delete/ Send Message/Rename Group/Set Ringtone/ Delete All 2.4 Speed Dials Allows you to view your Speed Dials list, designate new Speed Dials, or remove Speed Dial designations entered in your Contacts. 1. Press [MENU] 2 4. 2. Use Up/Down Navi Key to highlight the desired Speed Dial location (or enter the Speed Dial digit), and press [OK] Assign. 3. Use Up/Down Navi Key to highlight the Contact then press [OK]. 4. Use Up/Down Navi Key to highlight the number (if applicable), then press [OK]. A confirmation message is displayed. 2.5 My Name Card Allows you to view all of your personal Contact information including name and phone numbers. 1. Press [MENU] 2 5. 2. Use Up/Down Navi Key to highlight the feature you wish to edit, and press Left Soft Key Edit. 3. Edit the information as desired and press [OK]
Note You cannot edit the default (Mobile1) number, but you can add and edit additional phone numbers and other contact info. 3 Messages 3.1 New Message Allows you to send text messages, pages, and e-mail transmissions. Each message will be formatted and sent according to the destination address. The Basics of Sending a Text Message 1. Press [MENU] 3 1. 2. Enter the recipient's address. 3. Press [OK] to access the message screen. 4. Type your message (text or e-mail). 5. Press [OK] Send. A confirmation message is displayed. Select Recipient(s) Using Options 1. Press [MENU] 3 1. 2. Press Right Soft Key Options. 3. Use Up/Down Navi Key to highlight an option and press [OK]. Contacts To select a recipient from your Contact List. Recent Calls To select a recipient from your Recent Calls. Recent Messages Choose Inbox/ Sent to select a recipient from your Recent Messages. Groups Select a recipient from your Groups. General/ Family/ Friends/ Colleagues/ Business/ School Cancel Cancels editing your message. 4. Complete your message and press [OK] to send it, or go to Options (while entering text) to Save it. Customize Your Text Message Using Options While you are composing the text of a message you can insert customized text. 1. Press [MENU] 3 1. 2. Enter the recipient's address. 3. Use Up/Down Navi Key or press [OK] to highlight the Message window. 4. Press Right Soft Key Options. 5. Use Up/Down Navi Key to highlight an option and press [OK]. The options available to customize your text message are:
Add Templates/ Signature Save As Draft/ Templates Priority Level Normal/ High Callback # On/ Off Delivery Notice Enhanced/ Normal Cancel Cancels editing your message. 6. Complete your message and press [OK] to Send. 3.2 Inbox The phone alerts you in 2 ways when you receive a new message by:
- Displaying a notification message on the screen.
- Displaying the message icon (It blinks when the message is urgent). Received messages are displayed from newest to oldest. Viewing Your Inbox Up to 200 received messages can be stored in the Inbox. 1. Press [MENU] 3 2. 2. Use Up/Down Navi Key to highlight an inbox message. 3. Press Left Soft Key Reply to reply, [OK] View to view the message, or Right Soft Key Options to access additional options. The options are:
Delete/ Forward/ Save Contact/ Lock/ Message Info/ Delete Multiple When viewing a particular text message, the Right Soft Key Options menu will contain the following options:
Delete Deletes the selected message. Forward Forwards a received message to other destination address(es). Save Contact Stores the callback number, e-mail address, and numbers in the received message into your Contacts. Save as Templates Stores the message as a template for future messages. Call Back Calls the number in the received message. Go to website Accesses the website by starting Alltel Web. 3.3 Sent Up to 50 sent messages can be stored in the Sent folder. Access the Sent message list to view contents of sent messages and verify whether the transmission was successful or not. 1. Press [MENU] 3 3. 2. Use Up/Down Navi Key to highlight a sent message. Press Left Soft Key Resend to resend the message to the recipient, [OK] View to view the message, or Right Soft Key Options to access additional options (below):
Delete/ Forward/ Save Contact/ Lock/ Message Info/ Delete Multiple 3. While viewing the selected sent message, press Left Soft Key Resend to resend the message to the recipient, or Right Soft Key Options to access additional options
(below):
Delete Deletes the selected message. Forward Forwards a received message to other destination address(es). Save Contact Stores the callback number, e-mail address, and numbers in the received message into your Contacts. Save as Templates Stores the message as a template for future messages. Lock/Unlock Locks or unlocks the selected message. Message Info Shows the message type priority and status. 3.4 Drafts Displays saved messages and draft messages. 1. Press [MENU] 3 4. 2. Use Up/Down Navi Key to highlight a Saved message.
- Press [OK] to Edit.
- Or press the Right Soft Key Options to view the options available (below):
Delete Deletes the selected message from the Drafts. Save Contact Select Save New/ Update Existing to store the callback number, e-
mail address,and numbers in the received message into your Contacts or update an existing contact already stored in memory. Lock/Unlock Locks a message so that it is not erased if the Erase Saved or Erase All feature is used. Delete Multiple Select Selective/ All to delete multiple messages at one time. 3.5 Voicemail Allows you to hear new voice messages recorded in your voice mail box. Your phone will alert you when you receive a new voice message. Checking Your Voicemail Box 1. Press [MENU] 3 5. 2. Choose from the following options:
- Press Left Soft Key Clear to clear the voicemail counter.
- Press [SEND] to listen to the message(s).
- Press Right Soft Key Exit to return to the Messaging menu. 3.6 Templates Allows you to display, edit, and add text phrases. These text strings allow you to reduce manual text input into messages. 1. Press [MENU] 3 6. 2. Press Left Soft Key New to create a new template. Enter text and press [OK] to save the template. 3. Use Up/Down Navi Key to highlight a template and press Right Soft Key Options, then highlight an option and press [OK] to select:
Delete/Edit 3.7 Msg Settings Allows you to configure settings for Messaging:
1. Press [MENU] 3 7. 2. Use Up/Down Navi Key to highlight Auto Save/ Auto Delete/ Callback #/ Entry Mode/ Signature/ Speed Messaging then press [OK]. 3. Use Up/Down Navi Key to highlight one of the settings and press [OK] to select it. Messaging Settings Sub-Menu Descriptions 1. Auto Save (Auto Save/ Prompt/ Do Not Save) With this feature on, messages are automatically saved in the Sent folder when transmitted. 2. Auto Delete (On/ Off) With this feature on, read messages are automatically deleted when you exceed the storage limit. 3. Callback # (On/ Off/ Edit) With this feature on, you can input the callback number that will be automatically included when you send a message. 4. Entry Mode Allows you to select the default input method between T9Word, Abc and 123. 5. Signature (On/ Off/ Edit) Allows you to make/edit a signature to automatically send with your messages. 5. Speed Messaging (On/ Off) This feature allows you to speed dial text messages. For example:
1. Assign the number 2 as a speed dial for one of your contacts. 2. Compose a new message. In the destination address window, hold down the number 2 key instead of entering the address, and the message will be automatically sent to that contact. 3.8 Delete All Allows you to erase the messages stored in your Inbox, Sent, or Drafts message folders. You can also erase all messages at the same time. 1. Press [MENU] 3 8. 2. Use Up/Down Navi Key to highlight an option: Inbox/ Sent/ Drafts/ All Messages then press [OK]. 3. Use Up/Down Navi Key to highlight Yes/ No and press [OK]. 4 Recent Calls The Recent Calls Menu is a list of the last phone numbers or Contacts entries for calls placed, accepted, or missed. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list. Note To view a quick list of all your recent calls, press [SEND] Key while in standby mode. 4.1 Missed Calls Allows you to view the list of missed calls; up to 40 entries. 1. Press [MENU] 4 1. 2. Use Up/Down Navi Key to highlight an entry. 4.2 Received Calls Allows you to view the list of incoming calls; up to 40 entries. 1. Press [MENU] 4 2. 2. Use Up/Down Navi Key to highlight an entry. 4.3 Dialed Calls Allows you to view the list of ougoing calls; up to 40 entries. 1. Press [MENU] 4 3. 2. Use Up/Down Navi Key to highlight an entry. 4.4 All Calls Allows you to view the list of missed, received and dialed calls; up to 120 entries. 1. Press [MENU] 4 4. 2. The history of all calls are displayed. 4.5 Call Timer Allows you to view the duration of selected calls. 1. Press [MENU] 4 5. 2. Use Up/Down Navi Key to highlight a call type (below). Last Call/ Home Calls/Roam Calls/ All Calls 5 My Folder 5.1 Record Voice Allows you to add, listen to, and erase short verbal reminders. 1. Press [MENU] 5 1. 2. Press [OK] Record to record a new voice memo. 3. Talk into the microphone, then press [OK] Stop. 4. Press Left Soft Key to save. The default memo title is the date and time of recording. 5. While the highlight is still on the recording, press Right Soft Key Options to access the following:
Rename/ Delete 5.2 Images Allows you to select images to customize your phone's Main Screen or Picture ID. 1. Press [MENU] 5 2. 2. Use Up/Down Navi Key to highlight My Images/ Default/ Buy Wallpaper then press [OK]. 3. Use Navi Keys to highlight the image you want to display.
- Press Right Soft Key Options to access additional options. Use to highlight an option (below) and press [OK]. Set as/ Delete/ Rename/ Lock/ List View/ Information/ Delete Multiple/ Sort by
- Press [OK] View to view the selected image. 5.3 Audios Allows you to choose audio clips. 1. Press [MENU] 5 3. 2. Press Left Soft Key Voice to record an audio clip.
- Press Left Soft Key Audio to return to the Audios list.
- Press Record to begin recording.
- While recording, press Left Soft Key Pause to pause, or [OK] Stop to stop recording.
- When you are finished recording, press Left Soft Key Save to save the audio clip,
[OK] Send to send the audio clip to somebody else, or Right Soft Key Options to access additional options. Use Up/Down Navi Key to highlight Rename/ Delete and press [OK]. 3. Use Up/Down Navi Key to highlight My Audios/ Default/ Buy Ringtones then press [OK]. 4. Use Up/Down Navi Key to highlight the audio clip.
- Press [OK] Play to play the selected audio clip.
- Press Right Soft Key Options to access additional options. Use Up/Down Navi Key to highlight an option (below) and press [OK]:
Set As/ Record Voice/ Delete/ Rename/ Lock/ Information/ Delete Multiple/ Sort by 6 Browser The browser allows you to view Internet content. Access and selections within this feature are dependent upon your service provider. 6.1 Start Browser Allows you to view Internet content. 1. Press [MENU] 6 1. 6.2 Web Messages Allows you to view Web messages. 1. Press [MENU] 6 2. 7 My Schedule 7.1 Calendar Allows you to store and access your agenda(s). Simply enter your appointments in the Calendar, and your phone will alert you with a reminder. 1. Press [MENU] 7 1. 2. Use Navi Keys to highlight the scheduled day. Left Navi Key Moves cursor to the left. Right Left Navi Key Moves cursor to the right. Up Navi Key Moves to the previous week. Down Navi Key Moves to the next week. 3. Press Left Soft Key New. 4. Use Up/Down Navi Key to highlight the field you wish to edit, then press Left Soft Key Set to edit your schedule information:
- Set Time - Subject
- Reminder - Repeat
- Repeat End - Ringtone 5. Press [OK] Save. 7.2 Alarm Clock Allows you to set up to five alarms. At the alarm time, any set alarm will sound the tone of your choice, and an alarm message will be displayed on the LCD screen. 1. Press [MENU] 7 2. 2. Use Up/Down Navi Key to highlight the alarm you wish to set, then press [OK] to select it. 3. Press Left Soft Key Set to set the alarm time. 4. Use Up/Down Navi Key to highlight Repeat (recurrence setting). 5. Press Left/Right Navi Key to select one of the following. Once/ Daily/ Mon - Fri/ Weekends. 6. Use Up/Down Navi Key to highlight Ringtones, press Left Soft Key Set and select a ringtone. 7. Press [OK] Save. 7.3 Notead Allows you to add, read, edit, and erase notes to yourself. 1. Press [MENU] 7 3. 2. Press Left Soft Key New to write a new note. 3. Type the note, then press [OK]. A confirmation message displays briefly, then displays your list of notes. Viewing/Editing a Notepad Entry 1. Access Notepad and highlight the entry. 2. To edit, press Right Soft Key Options. Delete / Edit / Delete All Start Command 8 Tools Your phone is equipped with helpful tools, including: Voice Command, My Menu, Ez Tip Calc, Calculator, World Clock, Stopwatch, and Unit Converter. 8.1 Voice Command Allows you to make phone calls quickly and easily by voice. Your phone recalls the number from your Contacts, displays it briefly, and then dials it. This menu also includes features that are useful for those who are driving or blind. It delivers time information by voice and allows you to check missed calls, messages and voicemails. 8.1.1 Press [MENU] 8 1 1. 8.1.1.1 Call <Name> or <Number>
1. Press [MENU] 8 1 1 1. 2. Say the name as it is saved in your Contact List or say the number. 8.1.1.2 Voicemail 1. Press [MENU] 8 1 1 2. 2. The phone will announce any new Voicemail(s). 8.1.1.3 Missd Calls You can ear details about missed calls. 1. Press [MENU] 8 1 1 3. 8.1.1.4 Messages This voice command feature will read out information from messages received. 1. Press [MENU] 8 1 1 4. 8.1.1.5 Time & Date This voice command feature will read out the current time & date. 1. Press [MENU] 8 1 1 5. 8.1.1.6 Help Allows you to view more information about the features in Voice Control. 1. Press [MENU] 8 1 1 6. 8.1.2 Allows you to choose between Normal or Speed settings. The Speed setting allows you to access the Voice Command functions more quickly with a non-verbal prompt.) 1. Press [MENU] 8 1 2. Command Mode Announce Alert 2. Select options. Normal/ Speed 8.1.3 Allows you to customize the Announce Alert function. Alert Announce allows you to hear more information about an incoming call in addition to, or instead of, the Ring/Ringtone. 1. Press [MENU] 8 1 3. 2. Select options. Disable/ Announce/ Announce+Ring 8.1.4 Allows you to train the voice recognition for improved results. 1. Press [MENU] 8 1 4. 2. Select options. Voice Command/ Answer/Digit Dial 8.1.5 Allows you to customize Best Match settings. 1. Press [MENU] 8 1 5. 2. Select options. Best Match Train Word 1 Match/ 4 Matches 8.2 My Menu Allows you quick access to your favorite menus. A maximum of 12 items can be stored in My Menu. 1. Press [MENU] 8 2. 2. Select the location of your choice by using Up/Down Navi Key, then press [OK]. 3. Select the menu you wish to add to My Menu by using Up/Down Navi Key, then press [OK]. 8.3 Ez Tip Calc Allows you to quickly and easily estimate the tip and total amount of a bill by inputting the bill amount before tip, the tip percentage, and dividing it by the number of people paying. 1. Press [MENU] 8 3. 8.4 Calculator Allows you to perform simple mathematical calculations. You can enter numbers up to the eighth decimal place. 1. Press [MENU] 8 4. 8.5 World Cock Allows you to determine the current time in another time zone or country. 1. Press [MENU] 8 5. 2. Press Right Soft Key Cities to select a specific city and display the date/time in that location. 3. Use to Up/Down Navi Key scroll through all available cities on the map. 4. Press [OK] to select the highlighted city. 5. Press Left Soft Key Set DST to set daylight saving time. 8.6 Stopwatch Stopwatch is available just as common stopwatches we see and use in daily life. 1. Press [MENU] 8 6. 2. Press [OK] Start to start, and press [OK] Stop to stop.
- You can use the Lap function by pressing Right Soft Key Lap to record up to 20 laps and lap times. 3. Press Left Soft Key Reset to reset. 8.7 Unit Converter Allows you to convert units of Area, Length, Temperature, Mass, Volume and Velocity. 1. Press [MENU] 8 7. Volume Ringers 9 Settings 9.1 Sound Options to customize your phone's sounds:
9.1.1 Allows you to assign ringtones for incoming calls. 1. Press [MENU] 9 1 1. 2. Select All Calls/ Caller ID/ No Caller ID/ Restricted Calls 3. Select My Audios/ Default 5. Use Up/Down Navi Key to highlight the ringtone. 5. Press [OK] Play to play the ringtone, and Left Soft Key Set to set the ringtone to your phone. 6. Click 5. Buy Wallpaer to purchase wallpaper image. 9.1.2 Allows you to set various volume settings. 1. Press [MENU] 9 1 2. 2. Select Master Volume/ Keypad/ Earpiece/ Speaker. 3. Use Up/Down Navi Key to adjust the volume of the function, then press [OK] to save the setting. 9.1.3 Allows you to select the alert tone for a new message. 1. Press [MENU] 9 1 3. 2. Select Text Message/ Voicemail/ Message Reminder. 3. Use Up/Down Navi Key to select a setting, then press [OK]. 9.1.4 Allows you to select the alert types. 1. Press [MENU] 9 1 4. 2. Use Up/Down Navi Key to highlight the alert you wish to edit. Call Alert/ Message Alerts/Calendar Alert/ Alarm Alert 3. Use Left/Right Navi Key to scroll through the alert types. Ring Only/ Vibrate Only/Ring & Vib 4. Press [OK] to save. 9.1.5 Allows you to set any of the 4 Alert options to On or Off. 1. Press [MENU] 9 1 5. 2. Select an alert option. 9.1.5.1 Minute Beep Alerts you 10 seconds before the end of every minute during a call. 9.1.5.2 Call Connect Alerts you when the call is connected. Message Alerts Service Alerts Alert Type Flip Tone Power On/Off Tone 9.1.5.3 Back to Top Alerts you when you scroll through the end of a menu list. 9.1.5.4 Low Battery Alerts you when the battery charge level is low.
- Use Up/Down Navi Key to set On/ Off, then press [OK] (for Low Battery option, Announce/ Tone) 9.1.6 Allows you to set the phone to sound a tone when the phone is powered on and off. 1. Press [MENU] 9 1 6. 2. Use Up/Down Navi Key to set to On/ Off, then press [OK]. 9.1.7 Allows you to set a flip tone that will play when you Folder open or closed. 1. Press [MENU] 9 1 7. 2. Use Up/Down Navi Key to set to On/ Off, then press [OK]. 9.2 Display Options to customize your phone's display screen. 9.2.1 Allows you to choose the kind of background to be displayed on the phone. 1. Press [MENU] 9 2 1. 2. Select Main Screen/ Front Screen 3. Select images to be used for Wallpaper from My Images or Default Folder. 4. Press 3. Buy Wallpaer to purchase wallpaper image. 9.2.2 Allows you to enter a string of characters which display on the LCD screen. 1. Press [MENU] 9 2 2. 2. Use Left/Right Nav Key to scroll between On/ Off. 3. Use Up/Down Navi Key to highlight the message window. 4. Input text and press Left Soft Key Abc to change text options, [OK] Save to save, or Right Soft Key Cancel to cancel editing your banner. 9.2.3 Allows you to set the duration for illuminating the backlight. 1. Press [MENU] 9 2 3. 2. Choose a submenu (options below), then press [OK]. Wallpaper Backlight Banner Display/ Keypad 3. Use Up/Down Navi Key to select a setting, then press [OK]. 9.2.4 Allows you to view the main Menu items as icons or on a list. 1. Press [MENU] 9 2 4. Menu Style Languages Font Settings Clocks & Calendar 2. Select Icon or List and press [OK]. 9.2.5 Allows you to use the bilingual feature according to your preference. Choose between English and Spanish. 1. Press [MENU] 9 2 5. 2. Use Up/Down Navi Key to select English or Spanish, then press [OK]. 9.2.6 Allows you to select the type of clocks displayed on the main LCD. 1. Press [MENU] 9 2 6. 2. Choose a Main Screen / Front Screen Switch between the options (below) for Main Screen using Up/Down Nav Key. Normal Clock/ Analog Clock/ Digital Clock/ Dual Clock/
Calendar/Clock & Keymap Switch between the options (below) for Front Screen using Up/Down Nav Key. Minimize/ Digital Clock 3. Press [OK] OK to set. 9.2.7 Allows you to select the type of font displayed on LCD. 1. Press [MENU] 9 2 7. 2. Choose a sub-menu and press [OK]. Font Type/ Dial Font Size 3. Use Up/Down Navi Key to highlight an option, then press [OK]. Options for Font Type LG Gothic/ LG Secret/ LG Lavender / LG Greentea Options for Dial Font Size Normal/ Large 9.3 Security The Security menu allows you to secure the phone electronically. 9.3.1 Keeps your phone from unauthorized use. Once the phone is locked, it is in restricted mode until the lock code is entered. You can still receive phone calls and make emergency calls. You can modify the lock code by setting a New Lock code within the Security menu. 1. Press [MENU] 9 3 2. Enter the four-digit lock code and press [OK]. The default lock code is commonly the last 4 digits of your phone number. 3. Press [1] Lock Phone. 4. Use Up/Down Navi Key to select an option, then press [OK]. Unlock The phone is never locked (Lock mode can be used). Lock The phone is always locked. When locked, you can receive incoming calls and make only emergency calls. On Power Up The phone is locked when it is turned on. Lock Phone Restrictions Reset Default Change Lock Code 9.3.2 Allows you to restrict Calls, Messaging or Data. 1. Press [MENU] 9 3. 2. Enter the four-digit lock code and press [OK]. 3. Press [2] Restrictions and enter the four digit code. 4. Use to select between Incoming Calls/ Outgoing Calls/ Incoming Messages/
Outgoing Messages/ Data, then press [OK]. 9.3.3 Allows you to enter a new four-digit lock code. 1. Press [MENU] 9 3. 2. Enter the four-digit lock code and press [OK]. 3. Press [3] Change Lock Code and select Phone Only/ Call & Applications. 4. Enter a new 4-digit lock code and press [OK]. 5. For confirmation, it will ask you to enter the new lock code again. 9.3.4 Allows you to reset your phone to factory default setting except prepaid-related parameters. 1. Press [MENU] 9 3. 2. Enter the four-digit lock code and press [OK]. 3. Press [4] Reset Default and press [OK]. 4. Read the displayed message and press [OK] to continue. 5. A message will pop up that says "Preference settings will be set to factory defaults. Press <OK> to continue." Press [OK]. 6. Use Up/Down Navi Key to highlight an option (below) and press [OK]. Revert/ Cancel. 9.4 Call Settings The Call Settings menu allows you to designate how the phone handles both incoming and outgoing calls. 9.4.1 Allows you to determine how to handle an incoming call. 1. Press [MENU] 9 4 1. 2. Use Up/Down Navi Key to select a setting (from below), then press [OK]. Answer options Flip Open/ Any Key/ Send Key Only/ Auto Answer Auto Retry 9.4.2 Allows you to set the length of time the phone waits before automatically redialing a number when the attempted call fails. 1. Press [MENU] 9 4 2. 2. Use Up/Down Navi Key to select a setting (from below), then press [OK]. Off/ Every 10 Seconds/ Every 30 Seconds/ Every 60 Seconds 9.4.3 Allows you to initiate a speed dial call by pressing and holding the speed dial digit. If set to Off, Speed Dial numbers designated in your Contacts will not function. One-Touch Dal 1. Press [MENU] 9 4 3. 2. Use Up/Down Navi Key to select a setting, then press [OK]. On/ Off Voice Privacy 9.4.4 Allows you to set the voice privacy feature for CDMA calls as Enhanced or Standard. CDMA technology already offers inherent voice privacy. Check with your service provider for availability. 1. Press [MENU] 9 4 4. 2. Use Up/Down Navi Key to select a setting, then press [OK]. Enhanced/ Standard Airplane Mode 9.4.5 Allows you to use features on your phone that do not require wireless communications. 1. Press [MENU] 9 4 5. 2. Read the displayed message and press [OK] to continue. 3. Use Up/Down Navi Key to select a setting, then press . On/ Off TTY Mode 9.4.6 Allows you to attach a TTY (Teletype writer) device, enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY. 1. Press [MENU] 9 4 6. 2. Read the displayed message and press [OK] to continue. 3. Use Up/Down Navi Key to select a setting, then press [OK]. TTY Full/ TTY + Talk/ TTY + Hear/ TTY Off Paired Devices 9.5 Bluetooth 9.5.1 Pairing is the process that allows the handset to locate, establish and register 1-to-
1 connection with the target device. For pairing new Bluetooth device 1. Press [MENU] 9 5 1. 2. Follow the Bluetooth accessory instructions to set the device to pairing mode. 3. Press Left Soft Key Search. 4. If Bluetooth power is set to off, you will be prompted to turn power on. Highlight Yes and press [OK]. 5. Choose to conduct a New Search or to bring up the results of the Last Search (if applicable). 6. The device will appear in the Found Devices menu once it has been located. Highlight the device and press [OK]. 7. The handset will prompt you for the passkey. Consult the Bluetooth accessory instructions for the appropriate passkey (typically 0000 - 4 zeroes). Enter the passkey and press [OK]. 8. Once pairing is successful, select between Always Ask/ Always Connect. 9. Once connected, you will see the device listed in the Paired Devices menu. Power 9.5.2 Allows you to set the power On/Off. 1. Press [MENU] 9 5 2. 2. Use Up/Down Navi Key to select a setting, then press [OK]. On/ Off Note By default, your devices Bluetooth functionality is turned off. My Visibility My Bluetooth Info My Bluetooth Name 9.5.3 Allows you to set the visibility of your Bluetooth device. 1. Press [MENU] 9 5 3. 2. Use Up/Down Navi Key to select a setting, then press [OK]. Visible/ Hidden Note If you turn on My Visibility, your device is able to be searched by other in-range Bluetooth devices. 9.5.4 Allows you to edit the name of the Bluetooth device. 1. Press [MENU] 9 5 4. 2. Hold down [BACK] to clear the existing name. 3. Use the alphanumeric keypad to enter a new alias. 4. Press [OK] to save and exit, or Right Soft Key Cancel to cancel editing. 9.5.5 Allows you to view the information of the Bluetooth function. 1. Press [MENU] 9 5 5. 9.6 System The System menu allows you to designate specific system network settings. Network 9.6.1 9.6.1.1 System Select Allows you to set up the phone producers management environment. Leave this setting as the default unless you want to alter system selection as instructed by your service provider. 1. Press [MENU] 9 6 1 1. 2. Use Up/Down Navi Key to highlight Home Only/ Automatic A/ Automatic B then press [OK].
(Depending on the available PRL, the options may differ between Automatic or Automatic A/ Automatic B). 9.6.1.2 Serving System Identifies the channel number of a system that is served as an SID Number. This information should only be used for technical support. 1. Press [MENU] 9 6 1 2. Location 9.6.2 Menu for GPS (Global Positioning System: Satellite assisted location information system) mode. 1. Press [MENU] 9 6 2. 2. Use Up/Down Navi Key to highlight a setting, then press [OK]. Location On/ E911 Only Note GPS satellite signals are not always transmitted, especially under bad atmospheric and environmental conditions, indoors etc. 9.7 Phone Menmory Allows you to check out the memory status of your phone. 1. Press [MENU] 9 7. 2. Use Up/Down Navi Key to highlight Reserved Memory/ Mulimedia, and press
[OK]. 9.8 Phone Info The Phone Info menu provides you with specific information pertaining to your phone model. 1. Press[MENU] 9 8. 2. Use Up/Down Navi Key to highlight an option and press [OK], or press the corresponding number key. My Number/ ESN/MEID/ Icon Glossary/ Version mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless Devices On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988
(HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities. While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the users hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. T4 is the better/higher of the two ratings. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use. In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This is synonymous for T ratings. This should provide the hearing aid user with normal usage while using their hearing aid with the particular wireless phone. Normal usage in this context is defined as a signal quality that is acceptable for normal operation. The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. For information about hearing aids and digital wireless phones FCC Hearing Aid Compatibility and Volume Control http://www.fcc.gov/cgb/dro/hearing.html Gallaudet University, RERC http://tap.Gallaudet.edu/DigWireless.KS/DigWirel ess.htm Hearing Loss Association of America [HLAA]
http://www.hearingloss.org/learn/cellphonetech.asp The Hearing Aid Compatibility FCC Order http://hraunfoss.fcc.gov/edocs_public/attachmatch
/FCC-03-168A1.pdf
This product uses the FCC Data API but is not endorsed or certified by the FCC