| submitted | available | document details (if available) | source link |
|---|---|---|---|
| July 27 2016 | January 23 2017 |
| various | User Manual | Users Manual | 1.19 MiB | July 27 2016 / January 23 2017 |
SPECIFICATIONS PRODUCT NAME : : 802.11a/b/g/n/ac + Bluetooth Combo Module MODEL NAME : LGSBWAC72 The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek. Designed Checked Approved LG Innotek Co., Ltd. I.H. PARK D.S. OH S.D. CHOI 2016.04.26 2016.04.26 2016.04.26 PAGE DOCUMENT No.
-
20
(00)-0073 REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
1 / 12 DOCUMENT No :
WC42512 Index No Description 1 Features 2 Ordering Information 3 4 5 Label Marking Block Diagram Absolute Maximum Ratings 6 Operating Conditions 7 8 Standard Test Conditions Pin Description 9 Mechanical Characteristics 10 Outline Drawing 11 Packing Information 12 Change History of Revision 13 Regulatory Notices Page 2 2 2 3 3 4 4 5 6 7 8 10 11 Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
2 / 12 DOCUMENT No :
WC42512 1. Features TWCM-K305D is the small size and low power module for IEEE 802.11ac wireless LAN
& BT4.2 + HS. TWCM-K305D is based on Mediatek MT7662TU solution. IEEE 802.11 a/b/g/n/ac Dual Band WLAN infrastructure Bluetooth 4.2+ HS Size : 68.0mm x 38.0 mm Two stream spatial multiplexing up to 300Mbps(802.11n)/ 867Mbps(802.11ac) WLAN Metal Press antenna, BT Printed antenna on Use on-chip OTP (One-Time Programmable) Host Interface : USB2.0 (WLAN & BT)
- This model is using the common USB2.0 to control WLAN and BT Security : WAPI, WEP, WPA, WPA2, WMM, AES, WEP, TKIP, CKP Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB 2. Ordering Information Description 802.11 a/b/g/n/ac + BT combo Module, Dual Band 2T2R MIMO Model TWCM-K305D LGSBWAC72 3. Label marking Customer P/N 1604B260101 TWCM-K305D 001EB2B00339 Customer P/N Product Lot No. : 1604B2601 MAC Address BAR Code
-16 : Year - 26 : Date Model No
- 04: Month - 01 : Manufactured Process
- A :Revision No. - 01 : Change History of Revision MAC Address No. Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
3 / 12 DOCUMENT No :
WC42512 4. Block Diagram ANT0 ANT1 BT ANT Diplexer Diplexer MT7662TU 2.4GHz 5GHz 2.4GHz 5GHz 11ac 2T2R Baseband 32bit RISC CPU MAC /
Packet buffer/
Security engine LPF 2.4GHz BT Bluetooth Baseband MAC 40MHz Main Clock System Control USB2.0 Interface PMU 3.3V R O T C E N N O C N I P 2 1 F
/
I B S U 5. Absolute Maximum Ratings Caution : The specifications in Table 1 define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Parameter Storage Temperature Storage Humidity (40)
. Other conditions Min
-20
-
< Table 1 >
Max
+80 90 Unit
%
1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40 and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
4 / 12 DOCUMENT No :
WC42512 6. Operating Conditions Parameter Min Typ Max Ambient Temperature Ambient Humidity (40) 0
-
-
-
Supply Voltage 3.135 3.3 60 85 3.6 Unit
%
Vdc 7. Standard Test Conditions The Test for electrical specification shall be performed under the following condition Otherwise this following conditions, not guaranteed this performance. 7-1. Ambient condition Temperature Humidity 7-2. Power supply voltages Input power VDD_3.3V 7-3. Current consumption 25 5 65 5%
Supply Voltage 3.135 ~ 3.6V Current Consumption Min. Typ. TX Mode ( 11ac/80MHz) Idle and Associated state Radio disabled state
-
-
-
480 270 60 Max. 1000 300 70 Note 1 : This figure is the RMS(root mean square) Value. 7-4. ESD Information Human Body Model (HBM) Min. Contact Air
-
-
Max. 2 15 Note 1 : IEC 61000-4-2 (150pF, 330R) Test condition : After 8-pin USB Cable connect to module, progress ESD test. Copyright. 2016. All Rights Reserved. Unit mA Unit kV REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
5 / 12 DOCUMENT No :
WC42512 8. Pin Description Pin No. Pin Name 1 2 3 4 5 6 7 8 9 10 11 12 VCC USB D-
USB D+
GND WL_HOST_WAKE VCC BT_REG_ON GND BT_DEV _Wake BT_HOST _Wake GND GND I/O I I/O I/O I O I O I O O I I Pin Description Power Supply 3.3V USB Communication signal USB D-
USB Communication signal USB D+
Ground Wake On WLAN Power Supply 3.3V BT Regulator ON Ground BT_DEV _Wake BT_HOST _Wake Ground Ground Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
6 / 12 DOCUMENT No :
WC42512 9. Mechanical Characteristics 1) Outline view Item Test Conditions Assembly No defects of wiring, soldering and assembling Appearance No dirt, rust, corrosion or foreign material 2) Appearance structure Item Test Conditions Dimension As assembly drawing Mounting As assembly drawing Weight 9.85g Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
7 / 12 DOCUMENT No :
WC42512 10. Outline Drawing Copyright. 2016. All Rights Reserved. DOCUMENT No :
WC42512 REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
8 / 12 11. Packing Information Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
9 / 12 DOCUMENT No :
WC42512 TWCM-K305D Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
10 / 12 DOCUMENT No :
WC42512 12. Change History of Revision Revision Date Contents of Revision Change Remark Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
11 / 12 DOCUMENT No :
WC42512 Regulatory Notices 1. FCC FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. OEM Responsibilities to comply with FCC and Industry Canada Regulations The module has been certified for integration into products only by OEM integrators under the following condition:
- The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times.
- The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. As long as the two condition above is met, further transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains FCC ID: BEJLGSBWAC72 Contains IC: 2703H-LGSBWAC72 Copyright. 2016. All Rights Reserved. REG. DATE : 2016.04.26 S P E C I F I C A T I O N REV.NO : 1.0 REV. DATE : 2016.04.26 MODEL NAME : TWCM-K305D (LGIT) LGSBWAC72 (LGE) PAGE :
12 / 12 DOCUMENT No :
WC42512 2. IC RSS-GEN, Sec. 7.1.3 (licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter. l'exposition aux RF Lantenne (ou les antennes) doit tre installe de faon maintenir tout instant une distance minimum de au moins 20 cm entre la source de radiation (lantenne) et toute personne physique. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate thisequipment.Attention:
Les changements ou modifications de cet appareil non expressment approuv par le fabricant peuvent annuler votre droit utiliser cet quipement. tiquetage du produit final (IC) Le module BT111 est tiquet avec sa propre identification FCC et son propre numro de certification IC. Si lidentification FCC et le numro de certification IC ne sont pas visibles lorsque le module est install lintrieur dun autre dispositif, la partie externe du dispositif dans lequel le module est install devra galement prsenter une tiquette faisant rfrence au module inclus. Dans ce cas, le produit final devra tre tiquet sur une zone visible avec les informations suivantes :
Contient module metteur identification FCC ID : BEJLGSBWAC72 Contient module metteur IC : 2703H-LGSBWAC72 3. CE Hereby, ' LG Electronics USA, Inc.' declares that this LGSBWAC72 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. Copyright. 2016. All Rights Reserved.
This product uses the FCC Data API but is not endorsed or certified by the FCC