M4710CE LCD MONITOR USERS MANUAL

 

Test Report No.: GETEC-E3-07-061 FCC Class B Certification APPENDIX H

: USERS MANUAL EUT Type: LCD Monitor FCC ID: BEJM4710CE Users Guide M4710CE Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the product and give the information to your dealer when you ask for service. Safety Precautions Please read these safety precautions carefully before using the product. Warning Caution If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from heat sources like electrical heaters.

- Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-moisture material or vinyl packing out of the reach of children.

- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. Do not put heavy objects on the product or sit upon it.

- If the product collapses or is dropped, you may be injured. Children must pay particular attention. Do not leave the power or signal cable unattended on the pathway.

- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury. Install the product in a neat and dry place.

- Dust or moisture can cause electrical shock, fire or product damage. If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.

- If you continue to use without taking proper measures, electrical shock or fire can occur. If you dropped the product or the case is broken, turn off the product and unplug the power cord.

- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.

- It can cause injury to human, problem to product and damage the display. Caution Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10cm from the wall)

- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat. Do not block the ventilation hole of the product by a tablecloth or curtain.

- The product can be deformed or fire can break out due to overheating inside the product. Install the product on a flat and stable place that has no risk of dropping the product.

- If the product is dropped, you may be injured or the product may be broken. Install the product where no EMI occurs. Keep the product away from direct sunlight.

- The product can be damaged. 1 Safety Precautions Electrical Power Related Precautions Warning Make sure to connect the power cable to the grounded current.

- You may be electrocuted or injured. Use the rated voltage only.

- The product can be damaged, or you may be electrocuted. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.

- It can cause electric shock. Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.

- A fire can break out due to overheating. Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

- You may be electrocuted due to excess moisture. If you dont intend to use the product for a long time, unplug the power cable from the product.

- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. Fix the power cable completely.

- If the power cable is not fixed completely, a fire can break out. Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put heavy objects on the power cord.

- The power line can be damaged, which may cause electric shock or fire. Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

- You may be electrocuted. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate. Caution Do not unplug the power cord while the product is in use.

- Electrical shock can damage the product. Precautions in Moving the Product Warning Make sure to turn off the product.

- You may be electrocuted or the product can be damaged. Make sure to remove all cables before moving the product.

- You may be electrocuted or the product can be damaged. 22 Safety Precautions Caution Do not shock the product when moving it.

- You may be electrocuted or the product can be damaged. Do not dispose the product-packing box. Use it when you move. Make the panel face forward and hold it with both hands to move.

- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair. Precautions in Using the Product Warning Do not disassemble, repair or modify the product at your own discretion.

- Fire or electric shock accident can occur.

- Contact the service center for check, calibration or repair. When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth. Keep the product away from water.

- Fire or electric shock accident can occur. Caution Do not put or store inflammable substances near the product.

- There is a danger of explosion or fire due to careless handling of the inflammable substances. When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth.

- The water can sink into the product, which can cause electric shock or serious malfunction. Take a rest from time to time to protect your vision. Keep the product clean at all times. Take a comfortable and natural position when working with a product to relax the muscles. Take a regular break when working with a product for a long time. Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep the proper distance from the product.

- Your vision may be impaired if you look at the product too closely. Set the appropriate resolution and clock by referring to the Users Guide.

- Your vision can be impaired. Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)

- Product can be deformed. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 3 Using the Remote Control Name of the Remote Control Buttons Mute button AV Button Input Select Button

(See next page) Menu Button Exit Button Volume Button Check Button There is not a function which is supported ARC button To select the image size of the screen. Video Operation Button Applicable for LG products only Power On/Off Button Sleep Button When watching AV/S-Video/RGB/HDMI Component1/ Component2 The product will be automatically turned off after a certain period of time. Press this button repetitively to select an appropriate time duration PSM Button

- Automatically adjusts the image. Press this button repetitively to set the intended screen. Up and Down buttons Bring up and down direction adjustment. Auto Button Automatic adjustment function

(Operational for the analog signal only) 4 Using the Remote Control AV Button Each time you press the Input button it will change to AV Component1 Component2 RGB HDMI/DVI Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Input Inserting batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cap. Dispose of used batteries in the recycle bin to prevent environmental pollution. 5 Name and Function of the Parts

* The product image in the users guide could be different from the actual image. Rear View REMOTE CONTROL IN RS-232C

(CONTROL&

SERVICE) OUT IN HDMI/DVI IN RGB IN AUDIO

(RGB/DVI) COMPONENT IN Y VIDEO P B P R L-AUDIO-R VIDEO AV IN L-AUDIO-R RGB OUT 1 2 AV OUT S-VIDEO REMOTE CONTROL IN RS-232C

(CONTROL&

SERVICE) HDMI/DVI IN RGB IN AUDIO

(RGB/DVI) COMPONENT IN Y VIDEO P B P R L-AUDIO-R VIDEO AV IN L-AUDIO-R OUT IN RGB OUT 1 2 AV OUT S-VIDEO Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports RGB, HDMI/DVI Ports PC Sound Jack

: Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Ports

*LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual). 6 Connecting to External Devices When Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. A B When connecting with the D-Sub signal input cable. When connecting with the HDMI to DVI signal input cable (not included). A RGB IN Rear side of the product. PC MAC PC/MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) HDMI/DVI IN B Rear side of the product.

(not included) Connect the Audio cable. AUDIO

(RGB/DVI) Rear side of the product. Connect the power cord. PC PC Rear side of the product. REMOTE CONTROL IN RS-232C

(CONTROL&

SERVICE) HDMI/DVI IN RGB IN AUDIO

(RGB/DVI) COMPONENT IN Y VIDEO P B P R L-AUDIO-R VIDEO AV IN L-AUDIO-R OUT IN RGB OUT 1 2 AV OUT S-VIDEO 7 Connecting to External Devices 1 Turn on power by pressing the power button on the product. SOURCE AUTO/SELECT ON/OFF Power button 2 Turn on the PC. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the SOURCE button on the back of the product. SOURCE AUTO/SELECT Input Input A B When connecting with a D-Sub signal input cable. Select RGB : 15-pin D-Sub analog signal. When connecting with a HDMI to DVI signal input cable. Select HDMI/DVI : HDMI to DVI Digital signal. How to connect to two computers. Note Connect the signal cables (HDMI to DVI and D-Sub) to each computer. Press the INPUT button on the remote control to select the computer to use. Directly connect to a grounded power outlet on the wall or a power bar with a ground wire. 8 Connecting to External Devices Watching RGB Outputs Use this function when displaying ANALOG RGB inputs of a PC to the other product. To use different products connected to each other Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products. 15-pin D-Sub Signal Cable RGB IN RGB IN RGB IN RGB IN RGB OUT RGB OUT RGB OUT RGB OUT PC PC Product 1 Product 2 Product 3 Product 4 Note When multi-connecting in/out cascade format, cables to be less damaged are recommended. We recommend that you should use cable distributor. 9 Connecting to External Devices When watching VCR / DVD Connect the video cable as shown in the below figure and then connect the power cord (See page 8). A When connecting with a BNC cable. Connect the input terminal with a proper color match. B When connecting with a S-Video cable. Connect to the S-Video input terminal to watch high image quality movies. Product AV IN VIDEO L-AUDIO-R AV OUT S-VIDEO Product AV IN L-AUDIO-R VIDEO AV OUT S-VIDEO Audio Cable

(not included) BNC Cable

(not included) Audio Cable

(not included) S-Video Cable

(not included) VCR/DVD Receiver VCR/DVD Receiver Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the SOURCE button on the back of the product. Input SOURCE AUTO/SELECT A B When connecting with an BNC cable. Select AV. When connecting with an S-Video cable. Select AV. Note When the BNC cable is connected simultaneously with S-Video cable, S-Video cable is first. 10 Connecting to External Devices When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i) Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page 8). Connect the input terminal with a proper color match. A Product COMPONENT IN Y VIDEO P B P R L-AUDIO-R 1 2 B Product COMPONENT IN Y VIDEO P B P R L-AUDIO-R 1 2 BNC Cable

(not included) Audio Cable

(not included) BNC Cable

(not included) Audio Cable

(not included) HDTV Receiver HDTV Receiver Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the SOURCE button on the back of the product. SOURCE AUTO/SELECT Input Input A B Select Component 1 Select Component 2 11 Connecting to External Devices When watching HDMI/DVI/RGB from the VCR/DVD/Set-top Box

(480p/576p/720p/1080i) Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 8). A HDMI/DVI IN Product RGB IN RGB OUT AUDIO

(RGB/DVI) Product HDMI/DVI IN RGB IN Product AUDIO

(RGB/DVI) B HDMI/DVI IN RGB IN AUDIO

(RGB/DVI) RGB OUT RGB OUT HDMI to DVI Signal Cable

(not included) RCA-PC Audio Cable HDMI Signal Cable

(not included) D-Sub Signal Cable RCA-PC Audio Cable VCR/DVD/Set-top Box VCR/DVD/Set-top Box VCR/DVD/Set-top Box Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the SOURCE button on the back of the product. SOURCE AUTO/SELECT When connecting with a HDMI to DVI signal input cable. When connecting with a HDMI signal input cable. Select HDMI/DVI When connecting with a D-Sub signal input cable. Select RGB A B Input Input 12 Connecting to External Devices Watching AV Outputs When you set the input signal of the main screen as 'AV (CVBS)', you can transmit the signal that you're watching to the AV output terminal. Video/TV BNC Cable

(not included) Audio Cable

(not included) VIDEO AV IN L-AUDIO-R AV OUT S-VIDEO Product BNC Cable

(not included) Audio Cable

(not included) Video/TV Note When multi-connecting in/out cascade format, cables to be less damaged are recommended. We recommend that you should use cable distributor. 13 To arrange cables using cable management 1. Arrange the cables in the center as shown in the following picture. OUT IN RGB OUT 1 2 AV OUT S-VIDEO 2. Fit the cable management to the Holder Groove downwards. SERVICE) OUT IN RGB OUT Y P B P R 1 2 AV OUT S-VIDEO 3. Bundle the cables using the supplied twister holder. IN 2 OUT cable management twister holder

* When you want remove it. Hold the Cable management with both hands and pull it downward. Warning Do not use the cable management as a handle for the Monitor. Do not press the cable management. 14 Attaching the product to a wall Set it up close to the wall so the product doesn't fall over when it is pushed backwards. The instructions shown below are a safer way to set up the product, which is to fix it on the wall so the product doesn't fall over when it is pulled forward. It will prevent the product from falling forward and hurting people. It will also prevent the product from damage caused by a fall. Please make sure that children don't climb on or hang from the product. 1 2 3 1. Use the braket and the bolt to fix the product to the wall as shown in the picture. 2. Secure the bracket with the bolt(not provided with product, purchase separately) on the wall. 3. Use a sturdy rope (not provided with the product, purchase separately) to tie the product. It is safer to tie the rope horizontaliy between the wall and the product. Note When moving the product to anoher place, undo the ropes first. Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. To use the product safely, make sure that the height of the braket that is mounted on the wall is same as that of the product. 15 Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit SOURCE AUTO/SELECT ON/OFF SOURCE AUTO/SELECT ON/OFF Power Button Press this button to turn on the power. Press this button again to turn it off. Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator colour changes to amber. MENU Button Use this button to show/hide the OSD (On Screen Display) menu screen. OSD Select /

Adjust Button Use this button to select an icon or adjust the setting in the OSD screen. Adjust the up and down. Adjust the volume. 16 Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit AUTO/SELECT Button

[For PC Analog signal]

Auto in progress For opimal display change resolution to 1360 X 768

[When XGA Mode is active and 1360 X768 is selected]

SOURCE Button AUTO/SELECT Input SOURCE Select the input signal AV Component 1 Component 2 RGB HDMI/DVI Digital signal Composite Video, Separate Video HDTV, DVD HDTV, DVD 15-pin D-Sub analog signal IR Receiver The unit that receives the signal from the remote control. 17 Selecting and Adjusting the Screen OSD Menu Icon PICTURE SOUND TIMER SPECIAL SCREEN Function Description Adjusts screen brightness, contrast and color that you prefer. Adjusts the audio function. Adjusts the timer function. Adjusts the screen status according to the circumstances. Adjusts the screen video. Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. 18 Selecting and Adjusting the Screen How to adjust the OSD (On Screen Display) screen Pops up the menu screen Move where you want to adjust Select a menu icon Move where you want to adjust Select a menu icon Adjust the status Save adjustment Exit from the menu screen. Use the remote control to adjust the OSD screen. 1 2 3 4 5 6 Press the MENU Button, then the main menu of the OSD appears. To access a control, use the Buttons. When the icon you want becomes highlighted, press the SET Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the SET Button. Exit the OSD by pressing the EXIT Button. How to adjust the screen automatically You need to adjust the screen display when connecting the product to a new computer or changing the mode. Refer to the following section to set an optimal product screen. Press the AUTO/SELECT button (AUTO button in a remote Control) in the PC analog signal. Then, an optimal screen status will be selected that fits into the current mode. If adjustment is not satisfactory, you need to adjust screen position, clock and phase in the OSD menu.

[When XGA Mode is active and 1360 X768 is selected]

19 Selecting and Adjusting the Screen Adjusting Screen Color PSM CSM Advanced Reset PSM The PSM function automatically adjusts the screen image quality depending on the AV usage environment. Dynamic : Select this option to display with a sharp image. Standard : The most general and natural screen display status. Mild : Select this option to display with a mild image. User1,2 : Select this option to use the user-defined settings. User1 Contrast Brightness Colour Sharpness Tint 100 50 50 50 0 R G Contrast : Adjust the difference between the light and dark levels in the picture. Brightness : To adjust the brightness of the screen. Colour : To adjust the color to desired level. Sharpness : To adjust the clearness of the screen. Tint :To adjust the tint to desired level. CSM Selecting a factory setting color set. Warm : Slightly reddish white. Normal : Slightly bluish white. Cool : Slightly purplish white. User : Select this option to use the user-defined settings. User Red Green Blue 0 0 0 Red / Green / Blue Set your own color levels. Note If the 'PSM' setting in the PICTURE menu is set to Dynamic, Standard or Mild the subsequent menus will be automatically set. 20 Selecting and Adjusting the Screen Adjusting Screen Color XD XD is LG Electronics' unique picture improving technology that displays a real HD source through an advanced digital signal processing algorithm. This function is not available in RGB-PC or HDMI/DVI PC modes. This menu is activated after selecting User1 or User2 of PSM. PSM CSM Advanced Reset Auto Manual XD Contrast XD Colour XD NR MPEG NR On On 0 Off Auto : XD is automatically changed to Auto. Manual : When selecting the Manual, you can adjust the XD Contrast, XD Colour, XD NR, MPEG NR. XD Contrast : Optimizing the contrast automatically according to the brightness of the reflection. XD Colour : Adjusting the colours of the reflection automatically to reproduce as closely as possible to natural colours. XD NR : Removing the noise up to the point where it does not damage the original picture. MPEG NR : You can select MPEG NR to reduce the picture noise which may appear on the screen while watching the AV. Advanced PSM CSM Advanced Reset Cinema Black level Off Low Cinema : (Function works in the following mode - AV, Component 480i/576i) When you watch the movie, this function adjusts the set to the best picture appearance. Black Level : (Function works in the following mode - AV(NTSC), HDMI/DVI adjusts the contrast and the brightness of the screen using the black level of the screen. Low : The reflection of the screen gets brighter. High : The reflection of the screen gets darker. Auto : Realizing the black level of the screen and set it to High or Low automatically. Reset Return PSM, CSM, XD, Advanced to the default factory settings. 21 Selecting and Adjusting the Screen Adjusting the audio function SSM AVL Balance Speaker 0 SSM SSM AVL Balance Speaker 0 Surround MAX Flat Music Movie Sports User The best sound tone quality will be selected automatically depending on the video type that you're currently watching. Surround MAX : Set the Surround MAX on. This function plays back the mono or stereo sound input with the dynamic surround effects. It will provide rich and profound sound tone. If you set the Surround MAX on, user audio setting can not be adjusted. Flat : The most commanding and natural audio. Music : Select this option to enjoy the original sound when listening to the music. Movie : Select this option to enjoy sublime sound. Sports: Select this option to watch sports broadcasting. User : Select this option to use the user-defined audio settings. User 120Hz 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz AVL To adjust uneven sound volumes across all channels or signals automatically to the most appropriate level. To use this feature, select On. Balance Speaker Use this function to balance sound from the left and right speakers. You can adjust internal speaker status. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. Note When connected to your computer and the 'SSM' setting in the audio menu is Flat, Music, Movie or Sports, the available menus are Balance, AVL and Surround MAX . 22 Selecting and Adjusting the Screen Adjusting the timer function Clock Off time On time Auto sleep Clock If the time is on the clock is incorrect, reset the clock manually. 1) Press the MENU button and then use 2) Press the 3) Press the 4) Press the button and then use button and then use button and then use button to select the Clock menu. button to set the hour(00~23). button to set the minutes(00~59). button to select the TIME menu. Off / On time The off time automatically switches the set to standby at the pre-set time. 1) Press the MENU button and then use 2) Press the 3) Press the 4) Press the 5) Press the button and then use button and then use button and then use button and then use button to select the TIME menu. button to select Off time or On time. button to set the hour(01~23). button to set the minutes(00~59). button to select On or Off. Auto sleep If Auto sleep is active and there is no input signal, the set switches to standby mode automatically after 10 minutes. 1) Press the MENU button and then use 2) Press the button to select the Auto sleep menu. button to select On or Off. button and then use Note In the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. The set must be in standby mode for the On time to work. When On time is operated, input screen is turned on as it was turned off. 23 Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Language Child lock To choose the language in which the control names are displayed. Use the buttons to select On or Off. The monitor can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position. In order to unlock it, do the following :

Push the MENU button on the remote control and set Child lock to the 'Off' position. ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time. Normal : If image sticking is never a problem, ISM is not necessary -set to Normal. White wash : White wash removes permanent images from the screen.

(An excessive permanent image may be impossible to clear entirely with white wash. Orbiter : May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion : This function inverts the panel colour of the screen. The panel colour is automatically inverted every 30 minutes. Orb.+Inv. : This function inverts the panel colour of the screen and may help prevent ghost images. The panel colour is automatically inverted every 30 minutes and the screen will move every 2 minutes. Set ID Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo 1 You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. 24 Selecting and Adjusting the Screen Selecting the options To use this function

- Must be displayed with various other products.

- Must be in a function that can be connected to RS-232C or RGB Out Tile mode Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Tile Mode Tile ID H-Size V-Size H-Position V-Position Reset Off 0 0 0 To set It is used to enlarge the screen and also used with several products to view screen. Tile Mode Tile mode and choose Tile alignment and set the ID of the current product to set location.

* Only after pressing the SET button the adjustments made to the settings will be saved.

- Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4)

- 4 x 4 available.

- Configuration of an integration screen is also available as well as configuration of One by one Display.

- Tile mode (product 1 ~ 4) : r(2) x c(2) row ID 1 ID 3 25 ID 2 ID 4 column Selecting and Adjusting the Screen Selecting the options

- Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 4 ID 7 ID 2 ID 5 ID 8 ID 3 ID 6 ID 9 column

- Tile mode (product 1 ~ 2) : r(2) x c(1) row ID 1 ID 2

- Tile mode (product 1 ~16) : r(4) x c(4) row ID 3 ID 7 ID 11 ID 15 ID 4 ID 8 ID 12 ID 16 ID 1 ID 5 ID 9 ID 13 ID 2 ID 6 ID10 ID 14 26 column column Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Tile Mode Tile ID H-Size V-Size H-Position V-Position Reset Off 0 0 0 To set Tile ID H Size V Size Select the location of the Tile by setting an ID. Adjust the horizontal size of the screen taking into account the size of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. H-Position Moving the screen position horizontally. V-Position Moving the screen position vertically. Reset Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. Power Indicator Use this function to set the power indicator on the front side of the product to On or Off. If you set Off, it will go off. If you set On at any time, the power indicator will automatically be turned on. Logo Light Use this function to set the Logo Display Lamp on the front side of the product to On or Off. If you set On, the lamp will automatically be turned on. Demo Use it to see the difference between XD demo on and XD Demo off.

(XD Demo function is not available in RGB PC/ HDMI/DVI PC mode.) 27 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto config. Manual config. XGA Mode ARC Reset Auto-config.

(RGB PC input only) Manual-

config. This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analogue signal input only. If the picture isn't clear after auto adjustment and characters are still trembling, adjust the picture phase manually.

* Phase, Clock function are not available in RGB DTV, Component, HDMI/DVI DTV.) Clock To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. This function is suitable for analogue signal input only Phase H-Position V-Position To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. This function is suitable for analogue signal input only. Moving the screen position horizontally. Moving the screen position vertically. XGA Mode

(RGB-PC only). For more improved or better picture quality, select the same mode corresponding to computer resolution. Auto config. Manual config. XGA Mode ARC Reset 1024x768 1280x768 1360x768 1366x768 28 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position ARC To select the image size of the screen. Spectacle Full When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally, in a nonlinear proportion, to fill the entire screen. When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. (Europe an version only) Original When your AV receives the wide screen signal, it will be automatically changed to picture format to be sent. 4:3 16:9 1:1 14:9 This pIcture format is 4:3 of general AV. You can enjoy movies (the picture format of 16:9) or general TV programmes thorough 16:9 mode. Programmes with 16:9 format are viewed naturally but 4:3 programmes are magnified on the left and right so that the screen is16:9 format. This pIcture format is 1:1 of general AV. (only RGB PC, HDMI/DVI PC) You can enjoy the picture format of 14:9 or general AV programmes through 14:9 mode. Programmes with 14:9 are viewed naturally, but 4:3 programmes are magnified on the top/bottom and left/right sides. Zoom1, 2 You can enjoy movies on a vast screen through Zoom mode. The 4:3 programmes are magnified on the top/bottom and left/right sides so that screen is 16:9 format. The bottom and top of the picture may be lost. MODE AV Component HDMI/DVI DTV PC RGB DTV PC ARC Spectacle Full Original 4:3 16:9 14:9 Zoom1 Zoom2 1:1 Reset Return Manual config. to the default factory settings. 29 Troubleshooting No image is displayed G Is the product power cord connected?

G Is the power indicator light on?

G Power is on, power indicator is blue but the screen appears extremely dark. G the power indicator amber?

G Does the 'Out of range' message appear?

G Does the 'Check signal cable' message appear?

See if the power cord is properly connected to the outlet. See if the power switch is turned on. Adjust brightness and contrast again. If the product is in power saving mode, move the mouse or press any key. The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual.

* Maximum resolution RGB : 1600 x 1200 @60Hz HDMI/DVI : 1280 x 1024 @60Hz The signal cable between PC and product is not connected. Check the signal cable. Press the 'INPUT' menu in the remote Control to check the input signal.

'Unknown Product' message appears when the product is connected. G Did you install the driver?

Install the product driver, which is provided with the product, or download it from the web site.

(http://www.lge.com) See if the plug&play function is supported by referring to the video card user manual.

'Controls Locked' message appears. G The 'Controls Locked' message appears when pressing the Menu button. The control locking function prevents unintentional OSD setting change due to careless usage. To unlock the controls, simultaneously press the Menu button and button for several seconds. (You cannot set this function using the remote control buttons. You can set this function in the product only.) L Note

* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz.

* Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. 30 Troubleshooting The screen image looks abnormal. G Is the screen position wrong?

G Do thin lines appear on the background screen?

G Horizontal noise appears or the characters look blurred. G The screen is displayed abnormally. D-Sub analog signal Press the AUTO button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel Display Setting menu. D-Sub analog signal Press the AUTO button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. D-Sub analog signal Press the AUTO button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. After-image appears on the product. G After-image appears when the product is turned off. If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. 31 Troubleshooting The audio function does not work. G No sound?

G Sound is too dull. G Sound is too low. See if the audio cable is connected properly. Adjust the volume. See if the sound is set properly. Select the appropriate equalize sound. Adjust the volume. Screen color is abnormal. G Screen has poor color resolution

(16 colors). Set the number of colors to more than 24 bits (true color) Select Control Panel Display Settings Color Table menu in Windows. G Screen color is unstable or mono-

colored. Check the connection status of the signal cable. Or, re-insert the PC video card. G Do black spots appear on the screen?

Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. 32 Specifications The product specifications can change without prior notice for product improvement. LCD Panel Power Dimensions

&Weight 47 inches (119.28 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating Visible diagonal size: 19.28 cm 0.76125 mm X 0.76125 mm (Pixel Pitch) Rated Voltage Power Consumption On Mode AC 100-240V~ 50/60Hz 3.0A

: 300W Typ.

: 1W (RGB) / 4W(HDMI/DVI)

: 1W Sleep Mode Off Mode

[1]

[2]

H H W D W D Width x Height x Depth

[1] 111.70 cm (43.98 inches) x 75.78 cm (29.83 inches) x 30.26 cm (11.91 inches)

[2] 111.70 cm (43.98 inches) x 66.10 cm (26.02 inches) x 11.87 cm (4.67 inches) Net

[1] 33.3 kg (73.41 lbs)

[2] 28.7 kg (63.27 lbs) NOTE Information in this document is subject to change without notice. 33 Specifications The product specifications can change without prior notice for product improvement. Video Signal Max. Resolution RGB : 1600 X 1200 @60Hz HDMI/DVI : 1280 X 1024 @60Hz It may not be supported depending on the OS or video card type. Recommended Resolution RGB : WSXGA 1360 X 768 @60Hz HDMI/DVI : WSXGA 1360 X 768 @60Hz It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 - 83 kHz HDMI/DVI : 30 - 72 kHz Vertical Frequency 56 - 85 Hz Synchronization Type Separate/Composite/SOG (Sync On Green)/Digital Input Connector 15-pin D-Sub type, HDMI (digital), S-Video, Composite Video, Component, RS-232C Environmental Conditions Operational Condition Temperature: 10C ~ 35C , Humidity: 10% ~ 80%

Storage Condition Temperature: -20C ~ 60C , Humidity: 5% ~ 95%

NOTE Information in this document is subject to change without notice. 34 Specifications PC Mode Preset Mode Preset mode VGA VGA VGA VESA VESA VESA VESA VESA MAC VESA 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1 2 3 4 5 6 7 8 9 10 Horizontal Frequency

(kHz) 31.469 31.468 31.469 37.500 43.269 37.879 46.875 53.674 49.725 48.363 Vertical Frequency

(Hz) 70 70 60 75 85 60 75 85 75 60 Preset mode 11 12 13 14 15 16 17 18 19 VESA VESA VESA VESA VESA VESA VESA VESA VESA 1024 x 768 1024 x 768 1280 x 720 1280 x 768 1360 x 768 1366 x 768 1280 x 1024 1280 x 1024 1600 x 1200 Horizontal Frequency

(kHz) 60.123 68.68 44.772 47 47.72 47 63.981 79.98 75.00 Vertical Frequency

(Hz) 75 85 60 60 60 60 60 75 60 RGB : Mode 1 ~ Mode 19 HDMI/DVI : Mode 1 ~ Mode 17 DTV Mode Component RGB(DTV) HDMI/DVI(DTV) 480i 576i 480p 576p 720p 1080i o o o o o o x x o o o o Power Indicator x x o o o o Product Blue Amber

Mode On Mode Sleep Mode Off Mode NOTE DTV/PC selection on RGB and HDMI/DVI inputs is available for PC resolutions :

640 X 480/60Hz, 1280 X 720/60Hz and DTV resolutions : 480p, 720p. 35 Specifications VESA wall mounting Connected to another object (stand type and wall-mounted type.) This product accepts a VESA-

compliant mounting interface pad.- (This has to be purchased separately if required.) For further information, refer to the VESA Wall Mounting Instruction Guide. Kensington Security Slot- (This has to be purchased separately if required.) Connected to a locking cable that can be purchased separately at most computer stores 36 Regulatory information Regulatory information Regulatory Information cont. FCC Compliance Statement This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. CE Conformity Notice (for Europe) Products with the CE Marking comply with the EMC Directive(89/336/EEC) and LOW VOLTAGE Directive

(73/23/EEC) issued by the Commission of the European Community. Compiance with these directives implies conformity to the following European Norms :

EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3 EN 60950

; Radio Frequency Interference

; Electromagnetic Immunity

; Power Line Harmonics

; Voltage Fluctuations

; Product Safety NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range. TCO95 (TCO95 applied model only) Congratulations!

You have just purchased a TCO95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally-adapted electronic products. 01 Regulatory Information cont. Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem as far as computers and other electronic equipment are concerned is that environmentally harmful substances are used both in the products and during their manufacture. Since it has not been possible so far for the majority of electronic equipment to be recycled in a satisfactory way, most of these potentially damaging substances sooner or later enter Nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from both the working and natural environment viewpoints. Since all types of conventional electricity generation have a negative effect on the environment (acidic- and climatic-

influencing emissions, radioactive waste, etc.), it is vital to conserve energy. Electronic equipment in offices consumes as enormous amount of energy, since it is often routinely left running continuously. What does the environmenal labelling involve?

This product meets the requirements for the TCO95 scheme, which provides for international environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Naturckyddsfreningen (The Swedish Society for Nature Conservation), and NUTEK (The National Board for Industrial and Technical Development in Sweden), and SEMKO AB (an international certification agency). The requirements cover a wide range of issues:

environment, ergonomics, usability, emission of electrical and magnetic fields, energy consumption and electrical and fire safety. The environmental demands concern, among other things, restriction on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs

(freons), and chlorinated solvents. The product must be prepared for recycling, and the manufacturer is obliged to have an environmental plan, which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the 02 computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level, in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, along with physical and visual ergonomics and good usability. The following is a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from:

TCO Development Unit Linnegatan 14, S-11494 Stockholm, Sweden FAX +46-8 782 92 07 E-mail (Internet): development@tco.se Current information regarding TCO95 approved and labelled products may also be obtained on the Internet using the address: http://www.tco-info.com/

TCO95 is a co-operative project between:

NUTEK SEMKO Nrings- och teknikutvecklingsverket Naturskydds freningen Environmental requirements Brominated flame retardants are present in printed circuit boards, cabling, casings, and housings, and are added to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame-retardant substances. These are related to another group of environmental toxins, PCBs, and are suspected of giving rise to similar harm, including reproductive damage in fish-

eating birds and mammals. Flame retardants have been found in human blood, and researchers fear that they can disturb fetus development. Bio-accumulative1 TCO95 demands require that plastic components weighing more than 25 grams must not contain flame retardants with organically bound chlorine or bromine. Lead can be found in picture tubes, display screens, solder, and capacitors. Lead damages the nervous system and in higher doses causes lead poisoning. The Regulatory Information cont. relevant bio-accumulative TCO95 requirement permits the inclusion of lead, as no replacement has yet been developed. Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant bio-accumulative TCO95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The color-

generating layers of display screens must not contain any cadmium. Mercury is sometimes found in batteries, relays and switches. Mercury damages the nervous system and is toxic in high doses. The relevant bio-accumulative TCO95 requirement states that batteries may not contain more than 25 ppm of mercury and that no mercury is present in any of the electrical or electronic components concerned with the display unit. CFCs (freons) are sometimes used for washing printed circuit boards and in the manufacture of expanded foam for packaging. CFCs break down ozone and thereby damage the ozone layer in the atmosphere, causing increased reception on Earth of ultra-violet light with consequent increased risks of skin cancer (malignant melanoma). The relevant TCO95 requirement: Neither CFCs nor HCFCs may be used during the manufacture of the product or its packaging. 1 Bio-accumulative means that the substance accumulates within living organisms. Shipping Package The packaging material can be recycled, or you can save it to return the monitor to a service center for repair or disposal. CFC Compounds in Distribution Packaging Cushioning material used for shipping finished monitors are not manufactured with nor do they contain any CFC compounds. Design for Disassembly/Recycling These monitors have been designed for easy end-of-life disassembly and recycling. Fasteners are generally of the same type for efficient disassembly. Components made of different materials can be easily separated and plastics have been identified using intermational symbols to aid in recycling. Monitor Disposal WARNING If you need to dispose of a monitor, ask a qualified service representative for the proper procedure. Improper disposal could result in personal injury from implosion. TCO'99 (TCO'99 applied model only) Congratulations!

You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. With the growing manufacture and usage of electronic equipment throughout the world, there is a recognized concern for the materials and substances used by electronic products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Electronic equipment in offices is often left running continuously, resulting in unnecessary consumption of large amounts of energy and additional power generation. From the standpoint of carbon dioxide emissions alone, it is vital to save energy. What does labelling involve?

The product meets the requirements for the TCO99 scheme which provides for international and environmental labelling of personal computers and/or displays. The labelling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen

(The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). 03 TCO99 requires that plastic components weighing more than 25 grams shall not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed wiring board laminates due to the lack of commercially available alternatives. Cadmium**

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. TCO99 requires that batteries, the colour-generating layers of display screens, and the electrical or electronics components shall not contain any cadmium. Mercury**

Mercury is sometimes found in batteries, relays and switches. TCO99 requires that batteries shall not contain any mercury. It also demands that mercury is not present in any of the electrical or electronics components associated with the labelled unit. There is however one exception. Mercury is, for the time being, permitted in the back light system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing this exception when a mercury free alternative is available. Lead**

Lead can be found in picture tubes, display screens, solders and capacitors. TCO99 permits the use of lead due to the lack of commercially available alternatives, but in future requirements TCO Development aims at restricting the use of lead. _____________________________________________

* Bio-accumulative is defined as substances which accumulate in living organisms.

**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative. Regulatory Information cont. Approval requirements cover a wide range of issues:

ecology, ergonomics, emission of electrical and magnetical fields, energy consumption and electrical safety. Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, and other substances. The product must be prepared for recycling and the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered. Energy requirements include a demand that the system unit and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the system unit shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electrical and magnetical fields as well as work load and visual ergonomics. Below you will find a brief summary of the ecological requirements met by this product. The complete ecological criteria document can be found at TCO Developments website http://www.tcodevelopment.com or may be ordered from:

TCO Development SE-114 94 STOCKHOLM, Sweden Fax: +46 8 782 92 07 Email : development@tco.se Information regarding TCO99 approved and labelled products may also be obtained at http://www.tcodevelopment.com Ecological requirements Flame retardants Flame retardants may be present in printed wiring board laminates, cables, and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30%

by weight of the plastic in a computer casing can consist of flame retardant substances. Many flame retardants contain bromine or chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls). Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise to health effects, including reproductive damage in fish-eating birds and mammals, due to the bio-accumulative*

processes when not disposed of in accordance with strict standards for disposal. 04 Regulatory Information cont. TCO03 (TCO03 applied model only) with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lge.com/experience/social_commitment/enviro ment.jsp Congratulations!

The display you have just purchased carries the TCO03 Displays label. This means that your display is designed,manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO03 Display requirements:

Ergonomics Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time beneficial both for the user and the environment Electrical safety Emissions Electromagnetic fields Noise emissions Ecology The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001 Restrictions on chlorinated and brominated flame retardants and polymers heavy metals such as cadmium, mercury and lead. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started 05 Regulatory Information cont. Deutsch Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-

Hndler oder einen Unternehmensvertreter von LG. Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lge.com/experience/social_commitment/enviro ment.jsp Franais Information sur la protection de lenvironnement LGE. a publi sa 'Dclaration en faveur dun 06 environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :

http://www.lge.com/experience/social_commitment/enviro ment.jsp Italiano Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali. Regulatory Information cont. Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lge.com/experience/social_commitment/enviro ment.jsp Espanl Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lge.com/experience/social_commitment/enviro ment.jsp Portugus Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. 07 Regulatory Information cont. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lge.com/experience/social_commitment/enviro ment.jsp Nederlands Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze 08 monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-

vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lge.com/experience/social_commitment/enviro ment.jsp Russian 1994 LGE

' LG ',

. LG LG . LG

. http://www.lge.co.kr/about/digitallg/environment/environment.jsp EPA (U.S.A only) (EPA applied model only) ENERGYSATR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. NOM MARK (Mexico only) Regulatory Information cont. K LGE

. LG.

http://www.lge.com/experience/social_commitment/enviro ment.jsp LG 1994 'LG '

. LG

. LG

. 09