| submitted | available | document details (if available) | source link |
|---|---|---|---|
| September 11 2000 | September 11 2000 |
| various | Users Manual | Users Manual | 216.79 KiB | September 11 2000 |
ATTACHMENT J USERS MANUAL 2000 PCTEST Lab U S E R S G U I D E i S t u d o W o r k s 7 7 M E
7 7 M C o o r l M o n i t o r http://www.lge.com P/NO : 3828TUL141A (S-0011) Printed in Indonesia r o t i n o M l r o o C StudioWorks 77ME/77M Users Guide Benutzerhandbuch Manuel dutilisation Guida Utente Guia del Usuario Manual do preprietrio Handleiding Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Contents ENGLISH Introduction ..........................................................A1 Connecting the Monitor........................................A2 Location and Function of Controls .......................A3 Control Panel Function .........................................A4 On Screen Display (OSD) Control Adjustment ...A6 On Screen Display(OSD) Selection and Adjustment ....................................................A7 Sound Selection and Adjustment ......................A11 Video Memory Modes ........................................A12 Troubleshooting ..................................................A13 Specifications ......................................................A14 DEUTSCH Einleitung...............................................................B1 Anschlieen ...........................................................B2 Ort und Funktion der Bedienungselemente .........B3 Bedienungselemente der Bildkontrolle.................B4 On Screen Display (OSD) Anpassung ..................B6 OSD Einstellung und Auswahlsymbole ................B7 Ton Einstellung und Auswahlsymbole................B11 Videospeichermodi .............................................B12 Strungen ............................................................B13 Produktbeschreibung ..........................................B14 FRANAIS Introduction ..........................................................C1 Branchement du Moniteur ...................................C2 Nomenclature et Fonctions ..................................C3 Fonctions du Paneau de Commande....................C4 Rglage des Commandes Affichage cran............C6 Options de slection et de Rglage OSD (affichage cran) .........................................C7 Son de Slection et de Rglage...........................C11 Mise en Mmoire de Modes Vido.....................C12 Quelques Conseils en Cas Dincident ................C13 Spcifications D'entree.......................................C14 ITALIANO Introduzione .........................................................D1 Collegamento del Monitor ...................................D2 Posizione e Funzione dei Conando di Controllo ...D3 Funzione del Pannello di Controllo......................D4 Controllo Regolazione On Screen Display (OSD) ...D6 Elementi di Selezione e Regolazione dell'OSD....D7 Souno di Selezione e Regolazione.....................D11 Modalit di Memoria Video ...............................D12 In Caso di Problemi ............................................D13 Specifiche............................................................D14 ESPAOL Introduccin ..........................................................E1 Conectando del Monitor .......................................E2 Ubicacion y Funcion de los Controles ..................E3 Funcin del Panel de Control................................E4 Ajuste del Control de Exhibicin en Pantalla (OSD)......E6 Ajuste del OSD y Seleccin de Elementos ............E7 Ajuste del Sonido y Seleccin de Elementos ......E11 Modos de Memoria de Video..............................E12 Sugerencias para Localizar las Fallas ..................E13 Especificaciones...................................................E14 PORTUGUS Introduo..............................................................F1 Conectando o Monitor ..........................................F2 Posio dos Controles e Descrio .......................F3 Funes do Painel de Controle .............................F4 Ajuste On Screen Display(OSD) ...........................F6 Ajustes OSD e Itens de Seleo ............................F7 Ajustes Som e Seleo.........................................F11 Modos de Memria de Vdeo..............................F12 Resolvendo Problemas.........................................F13 Especificaes ......................................................F14 NEDERLANDS Inleiding ................................................................N1 De Monitor Aansluiten.........................................N2 De plaatsing en de werking van de knoppen.......N3 Het bedieningspaneel ...........................................N4 Bediening via het beeldscherm OSD
(On Screen Display) .............................................N6 Kiezen en instellen via het OSD-systeem.............N7 Selectie en aanpassing van het geluid ...............N11 Modi voor videogeheugen..................................N12 Problemen oplossen ...........................................N13 Specificaties ........................................................N12 Introduction Thank you for purchasing a high resolution monitor. It will give you high resolution performance and convenient reliable operation in a variety of video operating modes. Features I H S L G N E The monitor is a 17 inches (15.9 inches viewable ) intelligent, microprocessor based monitor compatible with most analog RGB (Red, Green, Blue) display standards, including IBM PC, PS/2, Apple, Macintosh, Centris, Quadra, and Macintosh II family. The monitor provides crisp text and vivid color graphics with VGA, SVGA, XGA, and VESA Ergonomic modes (non-interlaced), and most Macintosh compatible color video cards when used with the appropriate adaptor. The monitor's wide compatibility makes it possible to upgrade video cards or software without purchasing a new monitor. Digitally controlled auto-scanning is done with the micro-processor for horizontal scan frequencies between 30 and 70kHz, and vertical scan frequencies between 50-160Hz. This monitor is capable of producing a maximum horizontal resolution of 1280 dots and a maximum vertical resolution of 1024 lines. The microprocessor-based digital controls allow you to adjust conveniently a variety of image controls by using the OSD (On Screen Display). Plug and play capability if supported by your system. This monitor has DDC 2B function.*
Compliant with the following regulated specifications :*
- EPA ENERGY STAR
- Swedish MPR II
- Swedish TCO99 (Applies to 77ME only)
* For detailed information, please refer to the Reference Guide provided . A1 Connecting the Monitor On the back of the monitor are two plug-in connections; one for the AC power cord, and the other for the signal cable from the video card. 1 2 2'
3 4 5 6 Power off both the monitor and PC. Connect the 15 pin VGA connector of the supplied signal cable to the output VGA video connector on the PC. The connectors will mate only one way. If you cannot attach the cable easily, turn the connector upside down and try again. When mated, tighten the thumbscrews to secure the connection. Locate the appropriate MAC to VGA adapter block at your local computer store. This adapter changes the high density 3 row 15 pin VGA connector to the correct 15 pin 2 row connection to mate with your MAC. Attach the other end of the signal cable to the side of the adapter block with 3 rows. Connect the attached adapter block/signal cable to the video output on your MAC. One end of the AC power cord is connected into the AC power connector on the back of the monitor. The other end is plugged into a properly grounded three-prong AC outlet. Power ON the PC, then the monitor. If you see the SELF DIAGNOSTICS message, check the signal cable and connectors. After using the system, power OFF the monitor, then the PC. IBM PC MACINTOSH M I C . O U T A U D I O . I N D-15P Audio In Mic Out 3 Power Cord Signal Cable 2'
2 Mac Adapter D-15P
* NOTE : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. A2 Location and Function of Controls Front View Left Side Jacks Front Panel Controls Rear View ID Label Audio IN Mic Out M I C . O U T A U D I O I N AC Power Socket D-Sub Signal Cable A3 Control Panel Function Front Panel Controls OSD Select /Adjustment Control Sound Mute Built-in Microphone Power (DPMS) Indicator Sound Menu OSD ON/OFF Enter Button Power Button Brightness Contrast Control OSD Select/
Adjustment Control OSD ON/OFF Enter Button Sound Menu Sound Mute Function Use these buttons to choose or adjust items in the on screen display. Use this button to enter or exit the on screen display. To adjust sound menu. Used to select mute on (means sound off) and mute off (means sound on). Built-in Microphone Built-in Microphone. Brightness Adjustment Control Contrast Adjustment Control Power (DPMS) Indicator Used to adjust the brightness of the screen. Adjust the display to the contrast desired. This Indicator lights up green when the monitor operates normally. If the monitor is in DPM
(Energy Saving) mode (stand-by/suspend/power off), this indicator color changes to amber. Power Button Use this button to turn the monitor on or off. A4 Control Panel Function Left Side Jacks Headphone Jack Headphone Jack that automatically mutes the speaker volume when headphone is attached. Microphone Jack An external microphone can be used instead of the built-in microphone. Rear Panel Jacks Mic. Out M I C . O U T A U D I O I N Audio In Connects microphone sound to PC via cable. Connects speaker sound to PC via cable attachment. Microphone Operation On the left side there is a MIC (Microphone) jack. By plugging a microphone in here, it may reduce the long length of cable needed to reach the PC's sound card. In order to use this MIC jack, you need to use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if available). Audio Features A major feature of this monitor is its built-in audio system. This conveniently integrates a stereo audio amplifier and speakers without taking up any more space. Because the monitor is designed like this, you can easily upgrade to audio capable multimedia applications by attaching your PC with sound card to the back of this monitor. It will result in significantly less cabling and space requirements. A5 On Screen Display (OSD) Control Adjustment Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the monitor to stabilize for at least 30 minutes before making image adjustment. To make adjustments in the On Screen Display, follow these steps:
Press the Button, then the main menu of the OSD appears. To acces a control, use the or Buttons. When the icon you want becomes highlighted, press the Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the Button. 1 11 1 1 22 2 2 2 3 3 3 33 4 4 44 4 5 5 5 5 6 6 6 6 7 7 7 7 A6 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu. OSD Adjust H POSITION 6 8 . 7 k H z / 8 5 H z H P O S I T I O N H SIZE 6 8 . 7 k H z / 8 5 H z H S I Z E V POSITION 6 8 . 7 k H z / 8 5 H z V P O S I T I O N V SIZE 6 8 . 7 k H z / 8 5 H z V S I Z E PINCUSHION 6 8 . 7 k H z / 8 5 H z P I N C U S H I O N 5 0 5 0 5 0 5 0 5 0 U U U U U Description To move picture image left and right. Moves the screen image left. Moves the screen image right. To adjust image width. Decreases the size of the screen image. Increases the size of the screen image. To move image up and down. Moves the screen image down. Moves the screen image up. To adjust image height. Decreases the size of the screen image. Increases the size of the screen image. To correct the bowing in and out of the image. Curves the image's edges inwards. Curves the image's edges outwards. A7 On Screen Display(OSD) Selection and Adjustment OSD Adjust TRAPEZOID 6 8 . 7 k H z / 8 5 H z T R A P E Z O I D PIN BALANCE 6 8 . 7 k H z / 8 5 H z P I N B A L A N C E U U PARALLELOGRAM 6 8 . 7 k H z / 8 5 H z P A R A L L E L O G R A M TILT 6 8 . 7 k H z / 8 5 H z T I L T H MOIRE 6 8 . 7 k H z / 8 5 H z H M O I R E V MOIRE 6 8 . 7 k H z / 8 5 H z V M O I R E U U U U 5 0 5 0 5 0 5 0 0 0 Description To correct geometric distortion. Makes the screen image narrower at the top. Moves the screen image wider at the top. To correct the balance of both sides bowing. Curvature of the sides to the right. Curvature of the sides to the left. This control adjusts for a skewing of the screen image. Tilts the screen image leftward. Tilts the screen image rightward. To correct image rotation. Tilts the screen image left. Tilts the screen image right. Reduce horizontal moire when interference patterns of dark steady wary lines appear on your screen. The moire adjustments may affect the focus of the screen. Reduce vertical moire when interference patterns of dark steady wary lines appear on your screen. The moire adjustments may affect the focus of the screen. A8 On Screen Display(OSD) Selection and Adjustment OSD Adjust COLOR 6 8 . 7 k H z / 8 5 H z C O L O R 6 8 . 7 k H z / 8 5 H z C O L O R 9300 6500 K R G B RECALL 6 8 . 7 k H z / 8 5 H z R E C A L L LANGUAGE 6 8 . 7 k H z / 8 5 H z L A N G U A G E 6 8 . 7 k H z / 8 5 H z L A N G U A G E E N G L I S H D E U T S C H F R A N A I S E S P A O L I T A L I A N O U U U Description 9300 : To appear the displays color temperature. Slightly bluish white. 6500 : To appear the displays color temperature. Slightly reddish white. K R G B
: Temperature range is from 5000K to 10000K. So, user easily color set without adjustment Red, Green and Blue (R/G/B).
: To set your own color levels. Allow for specific adjustments to Red, Green and Blue (R/G/B).
: To exit the COLOR OSD. You can use this function when you want to go back to the screen display of the time you purchased the product after adjusting to modify it in the Preset Mode. When you are in the User mode, you can recall only items. After using Recall, adjust the screen display again if necessary. If you want more information on the Preset Mode, refer to A12 page.
, To choose the language in which the control names are displayed. OSD Menus are available in 7 languages : English, German, French, Spanish, Italian, Portugus and Korean. A9 On Screen Display(OSD) Selection and Adjustment OSD Adjust VIDEO LEVEL 6 8 . 7 H z / 8 5 H z V I D E O L E V E L 0 . 7 V 1 . 0 V DEGAUSS 6 8 . 7 k H z / 8 5 H z D E G A U S S INFORMATION 6 8 . 7 k H z / 8 5 H z I N F O R M A T I O N U U U 6 8 . 7 k H z / 8 5 H z I N F O R M A T I O N P R E S E T M O D E 1 3 7 . 5 k H z / 7 5 H z 2 4 6 . 8 k H z / 7 5 H z 3 5 3 . 6 k H z / 8 5 H z 4 6 8 . 6 k H z / 8 5 H z 5 3 1 . 5 k H z / 7 0 H z 6 3 1 . 5 k H z / 6 0 H z OSD EXIT 6 8 . 7 k H z / 8 5 H z O S D E X I T U Description This item is used to select the monitor's input signal level. The normal level used for most PC's is 0.7V. When the screen suddenly gets brightened or blurry, please select 1.0V and try again. To manually demagnetize the screen which may show some image or color incorrectly. To inform users of preset and user mode data.
: USER MODE
: PRESET MODE To disappear of the OSD on the screen. A10 Sound Selection and Adjustment You were introduced to the procedure of selection and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the items that are shown on the main Menu. To make adjustments in the On Screen Display, follow these steps:
OSD Adjust Description 6 8 . 7 k H z / 8 5 H z V O L U M E VOLUME Raises or lowers audio level. 5 0 5 0 5 0 5 0 6 8 . 7 k H z / 8 5 H z T R E B L E 6 8 . 7 k H z / 8 5 H z B A S S 6 8 . 7 k H z / 8 5 H z B A L A N C E TREBLE Raises or lowers treble level. BASS Raises or lowers Bass level. BALANCE Changes balance of left/right speaker level. 6 8 . 7 k H z / 8 5 H z M I C R O P H O N E ON OFF MICROPHONE Enables or disables microphone usage. A11 Video Memory Modes The monitor has 36 memory locations for display modes, 11 of which are factory preset to popular video modes. Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq.(kHz) Vertical Freq.(Hz) 1 2 3 4 5 6 7 8 9 10 11 VGA VESA VESA VESA MAC VESA VESA VESA VESA VESA VESA 640 x 480 800 x 600 800 x 600 1024 x 768 640 X 400 640 X 480 800 X 600 640 X 480 832 X 624 1024 X 768 1280 X 1024 User Modes 37.50 46.88 53.68 68.677 31.47 31.47 37.88 43.27 49.75 60.02 63.98 75 75 85 85 70 60 60 85 75 75 60 Modes 12-36 are empty and can accept new video data. If the monitor detects a new video mode that has not been present before or is not one of the preset modes, it stores the new mode automatically in one of the empty modes starting with mode 12. If you use up the 25 blank modes and still have more new video modes, the monitor replaces the information in the user modes starting with mode 12. Recalling Display Modes When your monitor detects a mode it has seen before, it automatically recalls the image settings you may have made the last time you used that mode. You may, however, manually force a recall of each of the 11 preset modes by pressing the Recall button. All preset modes are automatically recalled as the monitor senses the incoming signal. The ability to recall the preset modes is dependent on the signal coming from your PCs video card or system. If this signal does not match any of the factory modes, the monitor automatically sets itself to display the image. A12 Troubleshooting Check the following before calling for service. SELF DIAGNOSTICS message. The signal cable is not connected, or is loose. Check and secure the connection. OUT OF FREQUENCY message appears. The frequency of the signal from the video card is outside the operating range of the monitor.
* Horizontal Frequency : 30-70kHz
* Vertical Frequency : 50-160Hz Use the graphics board's utility software to change the frequency setting (Refer to the manual for graphics board). The power LED is illuminated amber. Display power management mode. There is no active signal coming from the PC. The signal cable is not fastened securely. Check the computer power and graphics adapter configuration. The image on the SCREEN is not centered, or too small, or not a rectangle shape. Image adjustment not been done yet in the current operating mode. Use the and buttons to set the image to your liking. The monitor doesn't enter the power saving off mode (Amber). Computer video signal is not VESA DPMS standard. Either the PC or the video controller card is not using the VESA DPMS power management function. An abnormal picture is displayed on the screen. For example, the upper part of the picture may be missing or dark. If using certain non-VESA Standard video card, an abnormal picture may be displayed. Try setting it to one of the factory preset modes, or selecting to a resolution and refresh rate within the specification limits of the monitor. NOTE If the power indicator(LED) light is blinking amber, may result in abnomal condition of the monitor. Then press a power ON/OFF button on the front panel control and call your service technician for more information. A13 Specifications Picture Tube Sync Input Video Input Audio Power Consumption Dimensions (with tilt/ swivel stand) Power Input Weight Environmental Conditions E.C.M type (Electrect Condenser Microphone) 17 inch (15.9 inches viewable) FST 90 degree deflection 0.27mm dot pitch ARAS(Anti-Reflective Anti-Static) coating Horizontal Freq. 30 - 70kHz (Automatic) 50 - 160Hz (Automatic) Vertical Freq. Separate TTL, Positive/Negative Input Form 15 pin D-Sub Connector Signal Input Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive Input Form Resolution(max) 1280 x 1024@60Hz RMS Audio Output 4W (R+L) Input Sensitivity 0.7 Vrms Built-in MIC Speaker Impedance 4 120W Normal Stand-by/Suspend 15W 8W Power Off Width Height Depth Europe Others The products should be used according to the Power requirements of each ID LABEL. Net Operating Condition Temperature Humidity Storage Condition Temperature Humidity 46.5 cm / 18.3 inches 43.6 cm / 17.2 inches 44.2 cm / 17.4 inches AC 200-240V 50Hz 1.5A AC 100-240V 50/60Hz 2.0A 10 C to 40 C 10 % to 90 % non-Condensing 0 C to 60 C 5 % to 90 % non-Condensing 18.96 kg (41.80 lbs) NOTE Information in this document is subject to change without notice. A14
This product uses the FCC Data API but is not endorsed or certified by the FCC