| submitted | available | document details (if available) | source link |
|---|---|---|---|
| Lx6WTG_Q-ENG kjy Acrobat Distiller 8.1.0 (Windows) |
| various | Users Manual | Users Manual | 623.54 KiB |
Users Guide Network Monitor N1642W N1941W Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not Open the Display:
There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. A1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and humidity. A2 Important Precautions NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE This epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. A3 Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. A3 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it click. Hinge Body 3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. Stand Body Stand Body Stand Base 4. Tie down the base lock to perpendicularity direction. 5. Once assembled take the monitor up carefully and face the front side. Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. A4 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. 3. Change your lock on the product as it follows and turn it in the arrow direction. If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it. 4. Pull out the stand to remove. A5 Connecting the Display 5. Pushing the PUSH button, take the stand base from stand body. Warning:
You can hurt your finger. Good Position Bad Position Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5~20 Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A6 Connecting the Display Using the Computer NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. User must use shielded signal interface cables (D-sub 15 pin cable LAN cable) with ferrite cores to maintain standard compliance for the product. 1. A B Connect Dsub Cable (PC) Connect Dsub Cable (Mac) Analog signal Wall-outlet type Mac adapter (This item must be purchased separately.) For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically. NOTE Self Image Setting Function? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. AUTO/SET Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Connecting the Display Using the Monitor 1. Make sure to turn off the computer and product. Connect the cable as below sketch map 2 1 form to . Connect peripheral devices Connect LAN Cable (X550 port) 1 2 Analog signal Wall-outlet type
(Make sure to connect X550 port,not LAN port of PC) WX550 port Up to 5 ports are supported per X550 PCI Card. Up to 5 ports can be connected if necessary.
(This item must be purchased separately.) Keyboard/Mouse Input LAN cable should be connected before boo-
ting PC.(This item must be purchased separately.) Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume. It is recommended to use a PS/2-type keyboard/mouse. To use the monitor keyboard/mouse properly, it must be connected to the PC. Applications that require other than 16 bit color quality and the set resolution are not supported. AUTO/SET Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or titled screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 2. Press button on the front switch panel to turn the power on. A8 Connecting the Display NOTE LAN Cable
-For the LAN cable,it is recommended to use a 6m SFTP provided by LG. Image quality and some functionality may be degraded if a different LAN cable is used.
-To achieve good image quality,avoid using UTP and STP cables.
-You must use a direct LAN cable,not a crossover one. Both connections should be same colors. Do not connect any kind of network devices. Core The ferrite core can be used to reduce electromagnetic waves when connecting a LAN cable. As shown in the image below,fit the ferrite core to the LAN cable. The ferrite core needs to be separated from the mold by 5 centimeters. You can purchase SFTP 6m LAN cables and cores through LG additionally. 5010 P C 5010 A9 Connecting the Display Connecting to a X550 port using a LAN cable. Notice Turning the power off while booting the PC may damage the product. Turning the power off while booting the PC may cause it to operate incorrectly. If the mouse is connected using a USB device and is not detected, disconnect and connect it again. If you reconnect a peripheral device such as a keyboard, mouse or LAN cable while the PC is in operation, the device may not work properly. Make sure that the power is turned off when disconnecting/connecting a peripheral device. Making both ends of LAN cable to across the coil two times before connect to network monitor and PC. PC spec :
The host PC operating system can be Windows Server 2003 R2 SP2(Standard or Enterprise Edition, 32-bit). Notice
- To achieve the best PC performance, up to six users are recommended for one PC. If there are seven or more users, performance may be degraded depending on the environment and the PCs specifications.
- Check if the PC supports Windows Server 2003 before purchasing it. A host PC should have the following specifications:
1. Minimum
- CPU : Dual core processor at 3.0 GHz or higher
(i.e. : Intel Core 2 Duo or AMD Athlon X2)
- RAM : 2 GB of system memory or higher 2. Rocommend
- CPU : Quad core processor at 2.66 GHz or higher
(i.e. Intel Core 2 Quad or AMD Phenom X4)
- RAM : 4 GB of system memory Restrictions :
Using this network monitor for the following purposes may cause screen disruption or slower PC operation. 1. Video / Moving picture 2. Games Color setting:
Image quality may vary depending on the X550 card, so it is recommended to execute White Balance when using the product as a network monitor after connecting a LAN cable for the first time. Refer to A18 for more information on White Balance. If you use the monitor with a X-PORT input, image quality and resolution may be poorer than with a D-sub input.
( Only 16 bit color is supported for X-PORT input.) A10 Control Panel Functions Front Panel Controls Control Function MUTE Button X-PORT : This menu is available, use this button to switch the sound on or off. or
<mute off>
<mute on>
D-sub : This menu is not available. THIS MENU IS NOT AVAILABLE MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message
"OSD UNLOCKED" should appear. A11 Control Panel Functions Control Function SOURCE Use these buttons to select or adjust functions in the On Screen Display. Use this button to make either D-Sub or X-PORT connector active. This feature is used when two input sources are connected to the display. VOLUME Use these buttons to select or adjust functions in the On Screen Display. Use buttons to decrease or increase the speaker volume on X-PORT input. AUTO/SET Button Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is
- N1642W : 1360 x 768
- N1941W : 1360 x 768 Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. A12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps:
MENU AUTO/SET MENU Press the MENU Button, then the main menu of the OSD appears. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the AUTO/SET Button to select other sub-menu items.
/ Buttons to adjust the image to the desired level. Use the Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. A13 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus.
( : Adjustable A : Analog Input X : X-PORT Input ) Main menu PICTURE Sub-menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET sRGB 6500K 9300K A X Reference To adjust the brightness, contrast and gamma of the screen To customize the color of the screen POSITION TRACKING SETUP RED GREEN BLUE HORIZONTAL VERTICAL CLOCK PHASE SHARPNESS LANGUAGE OSD HORIZONTAL POSITION VERTICAL WHITE BALANCE POWER INDICATOR 4:3 IN WIDE FACTORY RESET To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment FLATRON F-ENGINE MOVIE INTERNET To select or customize desired image settings ACE RCM USER NORMAL DEMO NOTE The order of icons may differ depending on the model (A14~A19). A14 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. PICTURE COLOR POSITION Main Menu TRACKING SETUP MENU : Exit SET : Enter
: Adjust (Decrease/Increase) Menu Name
: Select another sub-menu
: Restart to select sub-menu Button Tip Sub-menus Menu Name Icons NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. A15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE PICTURE BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. MENU : Exit
: Decrease
: Increase SET : Select another sub-menu COLOR COLOR PRESET Select the screen color. sRGB: Set the screen color to fit the SRGB standard color specification. 6500K: Slightly reddish white. 9300K: Slightly bluish white. RED GREEN BLUE Set your own red color levels. Set your own green color levels. Set your own blue color levels. MENU : Exit
: Decrease
: Increase SET : Select another sub-menu A16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description POSITION POSITION POSITION HORIZONTAL To move image left and right. VERTICAL To move image up and down. MENU : Exit
: Decrease
: Increase SET : Select another sub-menu TRACKING TRACKING MENU : Exit
: Decrease
: Increase SET : Select another sub-menu CLOCK PHASE To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. SHARPNESS To adjust the clearness of the screen. A17 On Screen Display(OSD) Selection and Adjustment Main menu SETUP SETUP MENU : Exit
: Adjust
: Adjust SET : Select another sub-menu Sub menu LANGUAGE OSD POSITION WHITE BALANCE POWER INDICATOR Description To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is different from the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. 4:3 IN WIDE Use this function to select the image size of the screen. WIDE 4:3 WIDE : Switch to full screen mode according to input image signal. 4 : 3 : Change the image signal ratio into 4:3. FACTORY RESET Restore all factory default settings except
"LANGUAGE" . Press the , buttons to reset immediately. If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is a D-sub or X-PORT signal. A18 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description MOVIE INTERNET This feature lets you easily select the best desired image condition optimized to the environment
(ambient illumination, image types etc). MOVIE: For animation images in videos or movies INTERNET: For text images (Word processing etc.) USER MENU : Exit
: Decrease
: Increase SET : Select another sub-menu USER User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment. ..ACE(Adaptive Clarity Enhancer): Selects the clarity mode. ..RCM(Real Color Management): Selects the color mode. 0 1 2 3 Not applied Green enhance Flesh tone Color Enhance NORMAL This is under normal operating conditions. DEMO This is just for advertising to customer in the shops. Its setting is same with Movie mode and screen is divided by half. The INTERNET and NORMAL features become enabled for X-PORT input. A19 Troubleshooting Check the following before calling for service. No image appears No image appears Is the power cord of the display connected?
Check and see if the power cord is connected properly to the power outlet. Is the power indicator Press the Power button. light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE" message on the screen?
Do you see a "CHECK SIGNAL CABLE"
message on the screen?
If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display again. This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen?
Do you see OSD LOCKED when you push MENU button?
You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message OSD UNLOCKED will appear. A20 Troubleshooting Display image is incorrect Display Position is incorrect. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits
(true color).(Only for RGB) Important Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. (Only for RGB) The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. (Only for RGB) If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. A21 Troubleshooting Display image is incorrect The screen color is mono or abnormal. The screen blinks. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel - Settings.
(X-PORT support only 16bits color)
- White Balance is performed on black/white pattern.
- Check if the screen is set to normal mode. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
- Check if the screen is set to normal mode. A22 Specifications N1642W Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions
& Weight Tilt Range Power Input Environmental Conditions 15.6 inches (39.6 cm) Flat Panel Active matrix-TFT LCD, Anti-
Glare coating Visible diagonal size: 39.6 cm 0.252*0.252 mm pixel pitch Horizontal Freq. RGB Vertical Freq. 30 - 66 kHz (Automatic) 57 - 63 Hz (Automatic) RGB support 60Hz only(except Dos mode) 1440 x 900 (60Hz) 1280 x 720 (60Hz) X-PORT 1280 x 1024 (60Hz) 800 x 600 (72Hz) 1024 x 768 (60Hz) 1360 x 768 (60Hz) 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) X-PORT Connector X-PORT Signal RGB Signal Input Input Form X-PORT Signal Input Input Form VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz Max Recommend DDC 2B (Only for RGB) On Mode Sleep Mode Off Mode
: 20W(Typ.) 1 W 1 W With Stand Without Stand 38.17 cm / 15.03 inches 32.39 cm / 12.75 inches 19.84 cm / 7.81 inches 38.17 cm / 15.03 inches 26.03 cm / 10.25 inches 5.67 cm / 2.23 inches 2.6 kg (5.78 lbs) Width Height Depth Net Tilt AC 100-240V~ 50/60Hz 0.8A
-5~ 20 Operating Conditions Temperature 10C to 35 C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20C to 60 C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. A23 Specifications N1941W Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions
& Weight Tilt Range Power Input Environmental Conditions 18.51 inches (47.0 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating Visible diagonal size: 47.0 cm 0.30*0.30 mm pixel pitch Horizontal Freq. RGB Vertical Freq. 30 - 66 kHz (Automatic) 57 - 63 Hz (Automatic) RGB support 60Hz only(except Dos mode) 1440 x 900 (60Hz) 1280 x 720 (60Hz) X-PORT 1280 x 1024 (60Hz) 800 x 600 (72Hz) 1024 x 768 (60Hz) 1360 x 768 (60Hz) 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) X-PORT Connector X-PORT Signal RGB Signal Input Input Form X-PORT Signal Input Input Form VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz Max Recommend DDC 2B (Only for RGB) On Mode Sleep Mode Off Mode
: 23W(Typ.) 1 W 1 W With Stand Without Stand 44.84 cm / 17.65 inches 37.25 cm / 14.66 inches 19.84 cm / 7.81 inches 44.84 cm / 17.65 inches 27.80 cm / 10.94 inches 5.76 cm / 2.27 inches 3.1 kg (6.89 lbs) Width Height Depth Net Tilt AC 100-240V~ 50/60Hz 0.8A
-5~ 20 Operating Conditions Temperature 10C to 35 C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20C to 60 C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. A24 Specifications RGB Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4
*5 720 x 400 640 x 480 800 x 600 1024 x 768 1360 x 768 31.468 31.469 37.879 48.363 47.712 70 60 60 60 60
*Recommend Mode X-PORT Preset Modes (Resolution) Display Modes (Resolution) 1 2 3 4
*5 6 800 x 600(72Hz) 1024 x 768(60Hz) 1280 x 720(60Hz) 1280 x 1024(60Hz) 1360 x 768(60Hz) 1440 x 900(60Hz)
*Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode LED Color Blue Flicker Off A25 Installing the Wall mount plate (Only for N1941W) This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Separate the stand by pushing the PUSH button. Good Position Bad Position Warning:
You can hurt your finger. 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. A26 Digitally yours
This product uses the FCC Data API but is not endorsed or certified by the FCC