TLVHM3IU-N Telematics User Manual

FCC ID : BEJTLVHM3IU-N IC : 2703H-TLVHM3IUN Product name : Telematics TLVHM3IU-N

(OnlineConnectivityUnit) LG Electronics Inc. WhatistheOCU(OnlineConnectivityUnit) The OCU stands for Online Connectivity Unit Its a telematics device that LGE is developing for the Volkswagen vehicles. It is a small box installed deep inside passenger cars, and in charge of wireless communications in GSM, WCDMA and LTE network It provides voice and data call functions and various online services requested by VW Power, CAN, Audio and other data connector WCDMA/LTE DRx Antenna Connector GNSS Antenna C onnector GSM/WCDMA/LTE Antenna Connector LGE Confidential Product Image/ Function ProductImage Function TelematicsproductsupportingEmergencyCall/LTEservice service Emergency Call Mobile Online Services Positioning/Dead Reckoning

-GPS/GNSS/Beidu/Galileo LGE Confidential Specification Specification Dimension SupportingBands GSM850/1900 UMTSB2/B4/B5 LTEFDDB2/B4/B5/B12/B17 ModemChip QualcommMDM9240 GNSS GPS/Glonass/Beidou Bluetooth WiFi Size Weight Power No No 130mmx70.14mmx37.5mm 300g DC 12V,2A LGE Confidential The OCU3 Features Concept Major Services Safety & Security Services Oriented Telematics Terminal GNSS OCU Equipped Vehicles Emergency Call Automatic Collision Notification Call Road Side Assistance Call Vehicle Tracking LGE Confidential Call Services

- Emergency Call

- Automatic Collision Notification Call

- Information Call

- Road Side Assistance Call Remote Function Services

- Honking And Flashing

- Speed Alert

- Vehicle Disabling

- Battery Charge Management

- Departure Time Programming

- Door Lock / Unlock

- Pre-Trip Climatisation

- Trip Statistics

- Vehicle Status Geo-Fencing POI Address Import Vehicle Health Report Vehicle Tracking OCU3HighBlockDiagram Confidential LGE Confidential Notice FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. IC This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. LGE Confidential This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that necessary for successful communication. Le prsent metteur radio a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user. Cet appareil doit tre install et utilis avec une distance minimale de 20 cm entre l'lment rayonnant de cet appareil et l'utilisateur. LGE Confidential Acceptable antenna peak gain (incl. cable att.) = ERP or EIRP Limit(FCC) - Max tune-up conducted power The maximum antenna gain including cable att. must not exceed the table below. Frequency Band 699-716MHz(B12,17) 777-787MHz(B13) 824-849MHz(B5) 1710-1755MHz(B4) 1850-1910MHz(B2) Acceptable antenna peak gain (incl. cable att.) (dBi)

(ERP or EIRP Limit(FCC) - Max tune-up conducted power) 10.6 11.1 7.6 6 2 LGE Confidential