| submitted | available | document details (if available) | source link |
|---|---|---|---|
| June 11 2009 | September 11 2009 | W19_2243S(T)-ENG KJY Acrobat Distiller 4.0 for Macintosh |
| various | user manual | Users Manual | 1.12 MiB | June 11 2009 / September 11 2009 |
Users Guide W1946T W2046T W2246T W2346T W1946S W2046S W2246S W2346S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. Do not Open the Display:
There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display. To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock. 1 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Do not shock or scratch the front and sides of the screen with metallic objects. Otherwise, it may cause damage to the screen. Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Avoid high temperatures and humidity. 2 Important Precautions On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining. On Repacking Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal (Only, Hg lamp used LCD Monitor) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 3 Important Precautions NOTE THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE This epuipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. A3 Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord DVI-D Signal Cable
(This feature is not available in all countries.) 15-pin D-Sub Signal Cable
(To set it up, this signal cable may be attached to this product before shipping out.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture. Make sure you push it until you hear it click. 3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction. Hinge Body Stand Body Stand Body Stand Base Tie down the base lock to perpendicularity direction. 4
. 5. Once assembled take the monitor up carefully and face the front side. Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 5 Connecting the Display Disassembling the stand 1. Put a cushion or soft cloth on aflat surface. 2. Place the monitor face Down on the cushion or soft cloth. 3. Change your lock on the product as it follows and turn it in the arrow direction. . If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it. 6 Connecting the Display 4. Pull out the Stand to remove. 5. Pushing the PUSH button, Take the stand base from stand body. Good Position Bad Position Warning:
You can hurt your finger. 7 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display
-After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5~15
-5 15 Do not touch or press the screen when adjusting the angle of the monitor. When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. 8 Connecting the Display W1946T/W2046T/W2246T/W2346T Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable and power cord in order, then tighten the screw system, and other attached devices is turned off. 1 2 of the signal cable. A B Connect DVI-D(Digital signal) Cable Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type B A DVI-D (This feature is not available in all countries.) PC PC 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode) Power Button NOTE Self Image Setting Function? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. AUTO/SET Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 9 Connecting the Display W1946S/W2046S/W2246S/W2346S Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable and power cord in order, then tighten the screw system, and other attached devices is turned off. 1 2 of the signal cable. A Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type A PC 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. Power Button NOTE Self Image Setting Function? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. AUTO/SET Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 10 Control Panel Functions Front Panel Controls 1 2 3 4 5 6 MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message
"OSD UNLOCKED" should appear. MODE Button Use this button to enter F-ENGINE, ORIGINAL RATIO menus. For more information, refer to page 20. 11 Control Panel Functions AUTO Button Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is W1946S/W1946T : 1360 x 768 W2046S/W2046T : 1600 x 900 W2246S/W2346S/W2246T/W2346T : 1920 x 1080 INPUT Button
(SOURCE Hot key) Use these buttons to select or adjust functions in the On Screen Display. When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub.
(Only W1946T/W2046T/W2246T/W2346T ) EXIT Button Use these buttons to exit the On Screen Display. Power Button &
Power Indicator Use this button to turn the display on or off. The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white 12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps:
Pops up the menu screen Move where you want to adjust Select a menu icon Adjust the status Exit from the menu screen. 1 2 3 4 Press the MENU Button, then the main menu of the OSD appears. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Press the MENU Button once to return to the main menu to select another function. Press the MENU Button twice to exit from the OSD. 13 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu Supported input Description DSUB DVI-D
: D-SUB(Analog signal) input
: DVI-D(Digital signal) input PICTURE COLOR DISPLAY OTHERS BRIGHTNESS CONTRAST SHARPNESS COLOR TEMP
(PRESET / USER) GAMMA HORIZONTAL VERTICAL CLOCK PHASE LANGUAGE POWER INDICATOR WHITE BALANCE FACTORY RESET F-ENGINE ORIGINAL RATIO MOVIE INTERNET NORMAL DEMO WIDE ORIGINAL DSUB DVI-D DSUB DVI-D DSUB DSUB DSUB DVI-D DSUB DSUB DVI-D DSUB DVI-D DSUB DVI-D To adjust the brightness, contrast and gamma of the screen To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment To select or customize desired image settings To adjust the image size NOTE The order of icons may differ depending on the model (14~24). HDMI 14 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. MONITOR SETUP MONITOR SETUP AUTO AUTO MENU MODE MENU MODE AUTO AUTO INPUT INPUT EXIT EXIT Press the MENU Button, then the main menu of the OSD appears. Press the MENU Button, then the main menu of the OSD appears. Menu Name MENU PICTURE Icons BRIGHTNESS CONTRAST SHARPNESS 100 70 5 EXIT EXIT : Exit
: Adjust (Decrease/Increase) SET : Select another sub-menu
: Restart to select sub-menu Sub-
menus Button Tip NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE MENU PICTURE BRIGHTNESS CONTRAST SHARPNESS 100 70 5 EXIT BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contrast of the screen. SHARPNESS To adjust the clearness of the screen. Exit : Exit
: Decrease
: Increase
: Select another sub-menu COLOR MENU COLOR COLOR TEMP PRESET RED GREEN BLUE GAMMA PRESET 6500K GAMMA 1 50 50 50 COLOR TEMP PRESET Select the screen color. sRGB: Set the screen color to fit the sRGB standard color specification. 6500K: Slightly reddish white. 9300K: Slightly bluish white. EXIT USER RED Exit : Exit
: Decrease
: Increase
: Select another sub-menu Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. GAMMA Set your own gamma value.
: -50 / 0 / 50 On the monitor, high gamma values display whitish images and low gamma values display blackish images. 16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description DISPLAY W1946T/W2046T/W2246T/W2346T MENU DISPLAY HORIZONTAL To move image left and right. HORIZONTAL VERTICAL CLOCK PHASE DSUB 1024X768 60Hz 50 50 50 50 EXIT W1946S/W2046S/W2246S/W2346S MENU DISPLAY HORIZONTAL VERTICAL CLOCK PHASE 50 50 50 50 EXIT 1024X768 60Hz VERTICAL To move image up and down. CLOCK PHASE To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. Exit : Exit
: Decrease
: Increase
: Select another sub-menu 17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description OTHERS MENU OTHERS LANGUAGE To choose the language in which the control names are displayed. LANGUAGE ENGLISH POWER INDICATOR WHITE BALANCE FACTORY RESET ON NO NO POWER INDICATOR EXIT Exit : Exit
: Decrease
: Increase
: Select another sub-menu WHITE BALANCE Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. FACTORY RESET Restore all factory default settings except
"LANGUAGE."
Press the , buttons to reset immediately. NOTE If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal. 18 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. MONITOR SETUP AUTO MENU MODE AUTO INPUT EXIT Press the MENU Button, then the main menu of the OSD appears. Press the MENU Button, then the main menu of the OSD appears. Menu Name MENU F ENGINE Icons NORMAL MOVIE INTERNET DEMO EXIT EXIT : Exit
: Adjust (Decrease/Increase) SET : Select another sub-menu
: Restart to select sub-menu Sub-
menus Button Tip NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 19 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description F ENGINE MENU F ENGINE NORMAL Select this when you want to use the product in the most general using environment. NORMAL MOVIE INTERNET DEMO EXIT MENU F ENGINE MOVIE Select this when you are watching a video or movie. NORMAL MOVIE INTERNET DEMO EXIT MENU F ENGINE INTERNET Select this when you are working on the document (Word etc.) NORMAL MOVIE INTERNET DEMO EXIT MENU F ENGINE DEMO This is used for advertising in the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumers can check the difference after applying the video mode. NORMAL MOVIE INTERNET DEMO EXIT Exit
: Exit
: Move
: Select another sub-menu 20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description ORIGINAL RATIO MENU ORIGINAL RATIO WIDE Switch to full screen mode according to input image signal. FULL WIDE ORIGINAL MENU ORIGINAL RATIO FULL WIDE ORIGINAL EXIT EXIT ORIGINAL Change the input image signal ratio to 4:3. Exit
: Exit
: Move
: Select another sub-menu 21 Troubleshooting Check the following before calling for service. No image appears No image appears Is the power cord of the display connected?
Check and see if the power cord is connected properly to the power outlet. Is the power indicator Press the Power button. light on?
Is the power indicator flickering?
Do you see an "OUT OF RANGE" message on the screen?
Do you see a "CHECK SIGNAL CABLE"
message on the screen?
If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display again. This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen?
Do you see OSD LOCKED when you push MENU button?
You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message OSD UNLOCKED will appear. 22 Troubleshooting Display image is incorrect Display Position is incorrect. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. On the screen background, vertical bars or stripes are visible. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits
(true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. 23 Troubleshooting Display image is incorrect The screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel - Settings. The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver?
Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Make sure to check if the video card supports Plug&Play function. 24 Specifications W1946T Display Sync Input 18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 x 0.300 mm (Pixel pitch) Horizontal Freq. Analog:30 - 83 kHz (Automatic) Digital:30 - 61 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green), Digital Vertical Freq. Input Form Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 Hz Plug&Play DDC 2B(Digital), DDC2B(Anlaog) Power Consumption On Mode Sleep Mode Off Mode
25 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 42.26 cm / 16.63 inches Height 35.62 cm / 14.02 inches Depth 16.99 cm / 8.35 inches Without Stand Width 42.26 cm / 16.63 inches Height 26.67 cm / 10.50 inches Depth 6.04 cm / 2.37 inches Weight(excl. packing) 3.0 kg (6.66 lbs) Range Tilt : -5~15 Power Input Environment al Conditions AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 25 Specifications W1946S Display Sync Input 18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47.0 cm 0.300 x 0.300 mm (Pixel pitch) Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) Video Input Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1360 x 768 @60 Hz Recommend VESA 1360 x 768 @60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode
25 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 42.26 cm / 16.63 inches Height 35.62 cm / 14.02 inches Depth 16.99 cm / 8.35 inches Without Stand Width 42.26 cm / 16.63 inches Height 26.67 cm / 10.50 inches Depth 6.04 cm / 2.37 inches Weight(excl. packing) 3.0 kg (6.66 lbs) Range Tilt : -5~15 Power Input AC 100-240V~ 50/60Hz 0.8A Environment al Conditions Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 26 Specifications W2046T Display Sync Input 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50.8 cm 0.2766 x 0.2766 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green), Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max VESA 1600 x 900 @60 Hz Recommend VESA 1600 x 900 @60 Hz Plug&Play DDC 2B(Digital), DDC2B(Anlaog) Power Consumption On Mode Sleep Mode Off Mode
27 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 47.58 cm / 18.73 inches Height 37.64 cm / 14.81 inches Depth 16.99 cm / 6.68 inches Without Stand Width 47.58 cm / 18.73 inches Height 30.35 cm / 11.94 inches Depth 6.08 cm / 2.39 inches Weight(excl. packing) 3.2 kg (7.11 lbs) Range Tilt : -5~15 Power Input Environment al Conditions AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 27 Specifications W2046S Display Sync Input 20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size :
0.2766 x 0.2766 mm (Pixel pitch) 50.8 cm Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green) Video Input Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1600 x 900 @60 Hz Recommend VESA 1600 x 900 @60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode
27 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 47.58 cm / 18.73 inches Height 37.64 cm / 14.81 inches Depth 16.99 cm / 6.68 inches Without Stand Width 47.58 cm / 18.73 inches Height 30.35 cm / 11.94 inches Depth 6.08 cm / 2.39 inches Weight(excl. packing) 3.2 kg (7.11 lbs) Range Tilt : -5~15 Power Input AC 100-240V~ 50/60Hz 1.0A Environment al Conditions Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 28 Specifications W2246T Display Sync Input 21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 54.6 cm 0.248 x 0.248 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green), Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B(Digital), DDC2B(Anlaog) Power Consumption On Mode Sleep Mode Off Mode
28 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 50.92 cm / 20.04 inches Height 39.69 cm / 15.62 inches Depth 21.00 cm / 8.26 inches Without Stand Width 50.92 cm / 20.04 inches Height 30.42 cm / 11.97 inches Depth 5.98 cm / 2.35 inches Weight(excl. packing) 3.5 kg (7.77 lbs) Range Tilt : -5~15 Power Input Environment al Conditions AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 29 Specifications W2246S Display Sync Input 21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating cm Visible diagonal size :
0.248 x 0.248 mm (Pixel pitch) 54.6 Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green) Video Input Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode
28 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 50.92 cm / 20.04 inches Height 39.69 cm / 15.62 inches Depth 21.00 cm / 8.26 inches Without Stand Width 50.92 cm / 20.04 inches Height 30.42 cm / 11.97 inches Depth 5.98 cm / 2.35 inches Weight(excl. packing) 3.5 kg (7.77 lbs) Range Tilt : -5~15 Power Input AC 100-240V~ 50/60Hz 1.2A Environment al Conditions Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 30 Specifications W2346T Display Sync Input 23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 58.4 cm 0.266 x 0.266 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green), Digital Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B(Digital), DDC2B(Anlaog) Power Consumption On Mode Sleep Mode Off Mode
32 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 54.25 cm / 21.35 inches Height 41.66 cm / 16.40 inches Depth 21.00 cm / 8.26 inches Without Stand Width 54.25 cm / 21.35 inches Height 32.30 cm / 12.71 inches Depth 6.05 cm / 2.38 inches Weight(excl. packing) 4.2 kg (9.33 lbs) Range Tilt : -5~15 Power Input Environment al Conditions AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 31 Specifications W2346S Display Sync Input 23 inches (58.4 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating cm Visible diagonal size :
0.266 x 0.266 mm (Pixel pitch) 58.4 Horizontal Freq. Vertical Freq. Input Form 30 - 83 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green) Video Input Signal Input Input Form 15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max Recommend VESA 1920 x 1080 @60 Hz VESA 1920 x 1080 @60 Hz Plug&Play DDC 2B Power Consumption On Mode Sleep Mode Off Mode
32 W(Typ.) 0.5 W 0.5 W Dimensions
& Weight With Stand Width 54.25 cm / 21.35 inches Height 41.66 cm / 16.40 inches Depth 21.00 cm / 8.26 inches Without Stand Width 54.25 cm / 21.35 inches Height 32.30 cm / 12.71 inches Depth 6.05 cm / 2.38 inches Weight(excl. packing) 4.2 kg (9.33 lbs) Range Tilt : -5~15 Power Input AC 100-240V~ 50/60Hz 1.0A Environment al Conditions Operating Conditions Temperature Humidity 10C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20C to 60 C 5 % to 90 % non-Condensing Stand Base Attached ( ), Detached ( O ) Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 32 Specifications Preset Modes (Resolution) W1946T/W1946S Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8
*9 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1360 x 768 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 47.712 70 60 75 60 75 75 60 75 60
* Recommend Mode W2046T/W2046S Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8
*9 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1600 x 900 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 60.000 70 60 75 60 75 60 75 75 60
* Recommend Mode 33 Specifications W2246T/W2346T/W2246S/W2346S Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11
*12 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 65.290 67.500 70 60 75 60 75 60 75 75 60 75 60 60
* Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode LED Color White White Blinking Off 34 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Place the monitor with its front facing downward on a soft cloth. 2. Separate the stand by pushing the PUSH button. Good Position Bad Position Warning:
You can hurt your finger. 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. 35 Digitally yours
This product uses the FCC Data API but is not endorsed or certified by the FCC