WIT-300H Wireless IP Telephone Installation Manual Users Manual

 

. WIT-300H Installation Manual THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND MAY NOT BE REPRODUCED OR COPIED WITHOUT EXPRESS WRITTEN PERMISSION OF A DULY AUTHORIZED REPRESENTATIVE OF LG ELECTRONICS COMPANY Jan. 30-2005 LG Electronics, Inc. WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 ISSUE 0.1A 0.1B 0.1C REVISION HISTORY DATE Dec. 02/04 Dec. 03/04 Jan. 30/05 BY REMARK SJ HWANG Preliminary Release ALL Second Review & Modification SJ HWANG MFIM Registration & USB/TFTP Downloaing This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 2 WIT-300H Installation Manual Issue: 0.1C TABLE OF CONTENTS Date:: 30/Jan/05 SAFETY INSTRUCTIONS.................................................................................... 5 SAFETY INFORMATION .................................................................................... 5 BODY-WORN OPERATION...............ERROR! BOOKMARK NOT DEFINED. FCC PART 15 CLASS B COMPLIANCEERROR! BOOKMARK NOT DEFINED. CAUTIONS FOR BATTERY................................................................................ 6 BATTERY DISPOSAL........................................................................................... 6 ADAPTER (CHARGER) CAUTIONS ................................................................. 6 1. GETTING STARTED................................................................................... 8 1.1 OPTIONS & BASIC ENCLOSURE...................................................................................................10 1.2 WIRELESS NETWORK CELL..........................................................................................................11 1.3 ACCESS POINT..............................................................................................................................12 1.3.1 WHICH ONE IS BETTER .........................................................................................................12 1.3.2 HOW TO SET UP MULTIPLE APS ...........................................................................................12 1.4 IPECS LIK-300 ............................................................................................................................12 2. WIRELESS ENVIRONMENT SETUP..................................................... 12 2.1 BASIC IEEE 802.11B NETWORK DIAGRAM.................................................................................12 2.1 WHERE LIK-300 IS POSITIONED IN THE 802.11B NETWORK. ...................................................13 2.2 AP CONFIGURATION.....................................................................................................................13 2.2.1 SSID.....................................................................................................................................14 2.2.2 DTIM (DATA TRAFFIC INDICATION MAP) & BEACON .......................................................14 2.2.3 CONFIGURATION..................................................................................................................14 2.2.4 NETWORK PARAMETERS......................................................................................................18 IPECS LIK-300 SETUP .............................................................................. 18 3.1 MFIM S/W VERSION ....................................................................................................................18 3.2 WIT-300H REGISTRATION........................................................................................................19 3.2.1 REMOTE MODE.....................................................................................................................19 3.2.2 LOCAL MODE .......................................................................................................................20 S/W UPGRADE ........................................................................................... 21 4.1 USB S/W DOWNLOADING ...........................................................................................................21 4.2 TFTP S/W DOWNLOADING..........................................................................................................23 5. CONSOLE CONNECTION ....................................................................... 24 4. 3. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 3 Date:: 30/Jan/05 WIT-300H Installation Manual Issue: 0.1C PREFACE The main objective of this document is to provide an instruction for proper installation of WIT-300H. Mechanical feature is simply described and operation condition is precisely addressed to prevent the WIT-300H from malfunctioning by environmental reason. In advance of the environmental consideration, please refer to this document it will help an installer in setting up basic circumstance for normal operation of the WIT-300H. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 4 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 Safety Instructions WARNING! To reduce the possibility of electric shock, do not expose your phone to high humidity areas, such as the bathroom, swimming pool, etc. Always store your phone away from heat. Never store your phone in settings that may expose it to temperatures less than 32F or greater than 104F, such as outside during a snow storm or in your car on a hot day. Exposure to excessive cold or heat will result in malfunction, damage and/or catastrophic failure. Be careful when using your phone near other electronic devices. RF emissions from your mobile phone may affect inadequately shielded electronic equipment nearby. You should consult with manufacturers of any personal medical devices, such as pacemakers and hearing aides, to determine if they are susceptible to interference from your mobile phone. Turn off your phone in a medical facility or at a gas station. Never place your phone in a microwave oven as this will cause the battery to explode. IMPORTANT! Please read the TIA SAFETY INFORMATION before using your phone. Safety Information Please read and observe the following information for the safe and proper use of your phone and to prevent any unanticipated damage by accident. Also, keep the users manual in an accessible place at all times after reading it.

Unplug the power cord and charger during a lightning storm to avoid electric shock or fire.

Do not use your phone in high explosive areas, as the phone may influence high frequency devices.

Do not put your phone in a place subject to excessive dust, and be careful to keep the minimum required distance between the power cord and heat sources.

Unplug the power cord prior to cleaning your phone, and clean the power plug pin when it is dirty.

Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose, as it may cause fire or electric shock.

Hold the power cord plug firmly to plug and unplug the power cord. Ensure the plug is firmly connected. If it is not firmly connected, it may cause excessive heat or fire.

Do not place any heavy item on the power cord. Do not allow the power cord to be crimped, as it may cause fire or electric shock.

Be careful not to let the battery contacts touch metal conductors such as a necklace or coins. When shorted, it may cause an explosion.

Do not disassemble or allow heavy impact to the battery as it may cause electric shock, short-circuit, and fire. Store the battery in a place out of reach of children.

Using a damaged battery or placing a battery in your mouth, may cause serious injury.

Do not place items with a magnetic strip, such as a credit card, phone card, bank book and a subway ticket, near your phone. The magnetism of the phone may damage the data stored in the magnetic strip.

Do not hold or let the antenna come in contact with your body during a call.

Talking on your phone for a long period of time may reduce the call quality due to heat generated during use.

Do not allow excessive vibration or impact to the phone.

When you do not use the phone for a long period time, store it in a safe area with the power cord unplugged. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 5 WIT-300H Installation Manual Issue: 0.1C RF Exposure Information Date:: 30/Jan/05 The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections 2.1091,2.1093, and 15.247(b)(4) addressing RF Exposure from radio frequency devices. This model meets the applicable governments requirements for exposure to radio frequency waves. This wireless Terminal contains a radio transceiver. The radio transceiver and antenna have been designed to meet the RF emission requirements for human exposure as specified by the FCC as well as by other agencies from other countries. These guidelines were developed by the industry based on guidance from the World Health Organization(WHO). These industry standards have been developed to include additional safety margins to ensure that the user is exposed to the least amount of RF radiation. The radio transceiver uses a non ionization type of radiation as opposed to a ionized radiation such as an X-Ray wave. The exposure standard for these devices references a unit of measure known as SAR. The limit as set by the FCC is 1.6W/kg. The test for this emission level is done in an independent laboratory who employs test methods and operating positions reviewed by the FCC and other agencies. Before the Terminal was placed on the market, the product was tested and certified in accordance with the FCC regulations to verify that the product did not exceed the FCC SAR requirements. The highest SAR level measured for this terminal was 0.128 mW/g for body and 0.063 mW/g for Head. The design of this Terminal complies with the FCC guidelines ,these international standards and This terminal can be held in temporary confidentiality status. CAUTION Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement antenna. Cautions for Battery Safety Notices

Do not disassemble, crush, Puncture, or incinerate the battery pack.

The battery pack is intended for use only with this device.

To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts.

Do not short-circuit.

Do not expose to high temperature: 60C (140F).

To obtain a replacement battery, contact your local wireless dealer or carrier. Use only the batteries that have one of the following LG Part No. : Battery Pack(Standard) 3.7V Li-ion WIT-300H 050128P. Battery Disposal

Please dispose of your battery properly or bring to your local wireless carrier for recycling.

Do not dispose in fire or with hazardous or flammable materials. Adapter (Charger) Cautions

Using the wrong battery charger could damage your phone and void your warranty.

The adapter or battery charger is intended for indoor use only. Do not expose the adapter or battery charger to direct sunlight or use it in places with high humidity, such as the bathroom. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 6 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 7 Date:: 30/Jan/05 WIT-300H Installation Manual Issue: 0.1C FCC Safety Compliance Statement The Federal Communications Commission(FCC), with its action in ET Docket 93-62,has adopted a safety standard for human exposure to Radio Frequency(RF) electromagnetic energy emitted by FCC-certified equipment. The Wireless IP Terminal WIT-300H meets the uncontrolled environmental limits as stated in OET-

65C(01-01)when operated in accordance with the operation guidelines described in this manual. Proper operation of this radio device according to the instructions in this publication will result in user exposure substantially below the FCC recommended limits. Manufacturers FCC Declaration of Conformity Statement Model : Wireless IP Terminal WIT-300H FCC Certification Number : BEJWIT-300H This device complies with Part 15 rules. Operation is subject to the following two conditions;

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference. However, there is no guarantee that interference will not occur. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by on of the following measure;

Reorient or relocate the receiving antenna.

Increase separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from which the receiver is connected.

Consult the dealer or an experienced radio/TV technician. CAUTION This Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by LG including the use Of Non-LG antennas, could void the users authority to operate this device. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 8 Date:: 30/Jan/05 WIT-300H Installation Manual Issue: 0.1C Compliance Statement for Canada This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la Classe B respecte les exigencies du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operations is subject to the following two conditions ;

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The device is certified to the requirements of RSS-210 for 2.4GHz spread spectrum devices. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information contact your Local Industry Canada office. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 9 Date:: 30/Jan/05 WIT-300H Installation Manual Issue: 0.1C 1. Getting Started 1.1 Cautions

Using the phone near receiving equipment (i.e., TV or radio) may cause interference.

Keep your phone in a safe place when not in use.

Only use the batteries, antennas, and chargers provided by LG. Using unauthorized accessories Options & Basic Enclosure could void your warranty.

Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently void the warranty.

Do not hold the antenna while the phone is in use.

Do not use the phone in designated no cellular phone use areas.

Do not expose the phone to high temperature or humidity.

Avoid getting your phone wet. If the phone gets wet, turn the power off immediately and remove the battery. If the phone is non-functional, return it to the dealer for service.

Avoid shock or impact to the phone. Options:

User need to purchase desktop holder with additional payment. Desktop holder will be provided as option. 1) Desktop Holder Basic Enclosures:

Unpacking the box, customer will see the following items. 1) WIT-300H Phone 2) Rechargeable battery 3) Travel adaptor/

Power cable WIT-300H WiFi Phone. You should be able to find MAC address tag at the back side of the phone. Rechargeable battery. LG logo should be displayed. The one end is plugged into power tab, the other one is slotted into WIT-

300H Jack. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 10 WIT-300H Installation Manual Issue: 0.1C 4) USB cable 5) Handstrap 6) Ear Microphone 7) User manual Date:: 30/Jan/05 In the cable of ear-microphone, there is a remote control button. It is useful for hands-free way operation. Wireless Network Cell If you find the trademark of LG Electronics on the rechargeable battery, the delivery is strictly confirmed by LG Electronics. Inc. 1.2 Fundamental topology of the IEEE 802.11b based wireless networking is the overlapped concatenation of more than two cell ranges. The following figure shows the example of a cell area. The WIT-300H is only 802.11b compliant, its maximum frequency is 2.4GHz and 11 Mbps maximum bandwidth. In terms of the transfer speed, it is inferior to 802.11g compliant phone supporting 54Mbps, while, the cell coverage of 802.11b based WIT-300H can be wider than any other devices matched with 802.11g. For more detail information of cell planning, please refer to the manual of AP. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 11 Access Point WIT-300H Installation Manual Issue: 0.1C 1.3 The following is a list of APs that have been made an imperative experimentation with the WIT-300H and the result. Date:: 30/Jan/05 1) Cisco AP1230B 2) Netgear ME103 3) LinkSys WRT54GS 4) Orinoco AP600 5) 3COM 3CRWE454G72 1.3.1 Which one is better Depending on the internal implementation of IEEE802.11b protocol inside of the APs, roaming across two contiguous regions may be affected. Cisco & Orinoco is currently showing most optimized seamless roaming. CISCO and Orinoco APs are strongly recommended to customers. iPECS LIK-300 1.3.2 How to set up multiple APs Our recommendation is that one AP(Access Point) is used for one cell area. If you would install more than two APs for a cell, we recommend you to use the same SSID for each AP. 1.4 The iPECS LIK-300 is a call controller of the WIT-300H. Any activity of WIT-300H is notified to the iPECS LIK-300, therefore, it should be placed within a same LAN subnet. However, in remote mode, the WIT-

300H can interact with iPECS LIK-300 out of the subnet. 2. Wireless Environment Setup This section describes AP(Access Point) configuration for normal operation of WIT-300H. The AP should be plugged into a switch/hub for connectivity with the subnet of office. 2.1 The following figure exhibits network infrastructure of 802.11b compliant network diagram. Basic IEEE 802.11b network diagram This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 12 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 APs are connected to a HUB in subnet, since WIT-300H is able to access the Internet. The iPECS LIK-

300 and WIT-300H system work on top of this context. 2.1 The following is a basic configuration of IEEE802.11b environment to enable WIT-300H and the iPECS LIK-300. Where LIK-300 is positioned in the 802.11b network.

(1) WIT-300H / AP:

- IEEE 802.11b network

- SSID / DTIM interval configuration within AP

(2) AP / iPECS LIK-300:

- Direct connection : AP POE of iPECS LIK-300

- Indirect connection : AP HUB POE of iPECS in LIK-300 AP Configuration 2.2 Depending on vendors of AP, the following two parameters should be carefully set up. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 13 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 SSID 2.2.1 SSID is for authentication use. An AP can have an arbitrary SSID value for example wireless. In this case, WIT-300H with wireless SSID can communicate with that AP. It is important to use accurate SSID on both WIT-300H and AP. Recommendation)

(1) If you are free of security, please just use one SSID for all APs and WIT-300H.

(2) If you are using WIT-300H in a wireless environment with predetermined SSID, please change the SSID of your WIT-300H. After changing the SSID of WIT-300H, you need to reboot it to apply the change. 2.2.2 DTIM (Data Traffic Indication Map) & Beacon DTIM is related to an interval of packet transmission. By an inherent nature of the iPECS LIK-300, WIT-

300H frequently uses multicast message for the communication with the iPECS LIK-300. The delivery of multicast message is affected by the DTIM parameter. Beacon is an indication of packets buffered in AP which are to be delivered to each wireless station, WIT-

300H. The information of DTIM is contained in a beacon message. Therefore, DTIM configuration can be affected by the beacon interval. The following is illustrating the relationship of beacon and DTIM:

Recommendation)

(1) DTIM should be less than 200 msec.

(2) If AP doesnt support DTIM configuration, more special care needs to be taken for Beacon interval setup. Otherwise, Use the smallest DTIM interval that AP can support. 2.2.3 Configuration This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 14 WIT-300H Installation Manual Issue: 0.1C This section enumerates how you set up both SSID and DTIM in AP. Orinoco Date:: 30/Jan/05

(1) Open a page Interface>Wireless . You can see a edit box Network Name and DTIM Period.

(2) At Network Name enter SSID.

(3) At DTIM Period, enter 1. Cisco

(1) Open a page Network Interfaces > Settings . You can see a edit box DTIM.

(2) Enter 1. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 15 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05

(3) Open a page Security > SSID Manager . You can see a edit box SSID.

(4) Enter your SSID. LinkSys

(1) Open a page Setup > Basic Info . You can see a edit box SSID.

(2) Enter SSID. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 16 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05

(3) Open a page Advanced > Advanced Wireless . You can see a edit box DTIM.

(4) Enter 1 as DTIM value. 3COM

(1) Open a page Wireless Settings > Configuration . You can see a edit box SSID. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 17 Date:: 30/Jan/05 WIT-300H Installation Manual Issue: 0.1C

(2) Enter SSID.

(3) DTIM configuration is not supported. Netgear

(1) Open a page Wireless Settings > Basic . You can see a edit box SSID.

(2) Enter SSID.

(3) DTIM configuration is not supported. iPECS LIK-300 Setup 2.2.4 Network Parameters Network parameters such as IP address, netmask, gateway are also to be configured since AP is bridging between the WIT-300H and the iPECS LIK-300. They are all to be set up with the same values to those in iPECS LIK-300. 3. 3.1 WIT-300H is recognized as special phone type in MFIM in iPECS LIK-300, version 30.Ah. After downloading this version image into a MFIM of iPECS, you can see the following figure in WEB administrator, MFIM S/W Version This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 18 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 In System ID & Number Plans >> System & Device IP Address Plan , you can see a WIT3012D type. It indicates that WIT-300H phone is registered into the iPECS LIK-300. 3.2 WIT-300H Registration WIT-300H is recognized as one of the wired phone by iPECS MFIM. The registration can be completed by two modes like the LIP phone; Remote mode and Local mode. If you could use the MFIM located in your local LAN area, you can register your phone in local mode, otherwise, you should use remote mode. 3.2.1 Remote mode To register WIT-300H in remote mode, you should know WIT-300H MAC address and IP. A. Basic settings

(1) Enter the MAC address of WIT-300H in MFIM web administration page. MAC address is found at menu Address .

(MENU) > Phone Info > Network Info > MAC

(2) Enter SSID for wireless networking at

(MENU) > Settings > Network > 802.1b Config> SSID. User can probe all the APs around the WIT-300H, and choose one of them at Auto menu shown here. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 19 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05

(3) Set Remote mode to Yes at

(4) Set Same Router to Yes at

(5) Set Direct Send to Yes at

(6) Enter MFIM IP at

(7) Enter network mask of MFIM at

(MENU) > Settings > KTUset > Remote Mode .

(MENU) > Settings > KTUset > Same Router

(MENU) > Settings > KTUset > Direct Send

(MENU) > Settings > KTUset > MFIM IP

(MENU) > Settings > KTUset > MFIM Netmask B. When you use static IP address,

(1) Enter IP address of WIT-300H at Address

(MENU) > Settings > Network > Static IP > IP

(2) Enter network mask of WIT-300H at subnet

(3) Enter gateway IP of WIT-300H at Primary GW

(MENU) > Settings > Network > Static IP >

(MENU) > Settings > Network > Static IP >

C. When you use dynamic IP address,

(1) Set DHCP mode to Yes at After setting these all up, please turn off WIT-300H and then turn it on.

(MENU) > Settings > Network > DHCP 3.2.2 Local mode This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 20 WIT-300H Installation Manual Issue: 0.1C A. MFIM configuration Date:: 30/Jan/05

(1) Set the deep switch 3 to 1 as follows. It means that the MAC address of WIT-300H doesnt need to be registered in the MFIM. If the MAC address of the WIT-300H has been registered, MFIM configuration is not something to be concerned. B. SSID setting

(1) Enter SSID for wireless networking at

(MENU) > Settings > Network > 802.1b Config> SSID. User can probe all the APs around the WIT-300H, and choose one of them at Auto menu shown here. After setting these all up, please turn off WIT-300H and then turn it on. S/W Upgrade 4. The S/W image of WIT-300H composed of three binary files; wit300hDbg.bin, Drv_C.bin, Drv_M.bin.

(1) wit300hDbg.bin : It includes H/W support kits; WLAN driver, Operating system core, DSP/LCD drivers, etc.

(2) Drv_C.bin : It is the collection of business S/W; phonebook, Messaging, Screen manipulator, etc.

(3) Drv_M.bin : It is the compressed collection of graphic widgets; icon, bitmap, images, etc. USB S/W Downloading 4.1 USB is the easiest interface for customer to download S/W image into WIT-300H. Just plugging in a USB cable into PC keeping the image is a manual job for the downloading. The following Flash-up S/W needs to be installed in the PC. A. Connecting USB cable

(1) Plug in the USB cable in the PC which Microsoft Windows is installed. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 21 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05

(2) Turn on WIT-300H. The Windows detects new device through USB connection, and requires Driver S/W to be installed by popping up a window indicating the installation of new driver S/W for the WIT-300H. A. Installing driver

(1) Unzip S/W zip file.

(2) Assigning usbio.sys in the ZIP file to the window for new driver. Now, you are ready for downloading the S/W. B. Downloading S/W

(1) Click and run FlashUp.exe in the ZIP file.

(2) Browsing and selecting an image file through Browse button on the FlashUp.exe.

(3) Click button UpLoad. This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 22 Date:: 30/Jan/05 WIT-300H Installation Manual Issue: 0.1C

(4) You can see a progress window. 4.2 TFTP S/W Downloading S/W downloading is also possible through TFTP. A TFTP server should be properly setup in a PC containing WIT-300H image files You can download one of the S/W images as follows:

A. Entering Engineering mode

(1) In idle screen, press enter menu mode by pressing button

(2) Enter 9-8-0 for Engineering Mode

(3) Press buttons 2-1-3-3-9-2-[OK] as password.

(4) Now, you are in the Engineering mode. B. Set-up TFTP prameters

(1) Select TFTP Setting.

(2) Enter the following values. TFTP Server IP IP address of WIT-300H Subnet mask Gateway IP SSID File name to be downloaded

(6) Enter [OK] button On downloading S/W image, user can see the following LCD screen, for example system image

(wit300hDbg.bin) TFTP transaction is under progress and blocks of images are delivered from TFTP server This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 23 WIT-300H Installation Manual Issue: 0.1C and copied to the flash memory. Date:: 30/Jan/05 TFTP transaction is completed. 5. After finishing the TFTP, WIT-300H phone is on rebooting with the new image. Any error happens, this screen is shown. When any error occurs, the WIT-300H will work abnormally. Hence, please try to download the image again, until you succeed. Console Connection A. Console connection

(1) Plug in a console cable to WIT-300H and prepare for console monitoring by the PC through terminal emulator. Setting parameter is 115200 baudrate, no flow control, 1 stop bit, no parity. B. Console command

(1) ping - To make sure that you can access TFTP server from WIT-300H. It is can be done by This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 24 WIT-300H Installation Manual Issue: 0.1C Date:: 30/Jan/05 trying ping test at the WIT-300H. For the ping test, if the IP address of TFTP server is 10.10.10.221, enter ping 10.10.10.221 . DO NOT FORGET DOUBLE QUOTATION AROUND THE IP ADDRESS PARAMETER. The reply should be printed on the console successfully.

(2) showPhoneParam Listing up the configuration of WIT-300H

(3) changePhoneParam Changing the configuration of WIT-300H This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG Electronics company 25