2IHQI0966 Mag Power Station 15W Wireless Charger with Lamp Users Manual

LED LAMP + Magnetic Wireless Charging Station Model: #2IHQI0966 Lumens:

Wireless Charge Compatibility:

iPhone 13 mini, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, and iPhone cases with MagSafe and other compatible wireless devices Magnetic Wireless Charging Output:

7.5W Wireless Charging Output:

5W Color Temperature:

LED Lifespan:

Package Includes:

2500k-6000k 50k Hours Magnetic Wireless Charging Lamp, Power Adapter, User Manual IDENTIFY THE FOLLOWING PARTS:

A. ON/OFF Button. B. Touch Track Pad. C. 5W Wireless Charger. D. Magnetic Wireless Charging Pad. E. DC Power Port F. LED Lamp D F E B C A Setting up your LED lamp Connect the small end of the adapter to the lamp base, and the large end to an outlet. Once plugged in, the LED indicator will blink TWICE. mode and color cycle mode. See below for instructions on how to operate color selection Charge up to 7.5W Magnetically The Perfect Snap Every Time! Built-in magnets perfectly align with your iPhone to maximize your charge. Simply place a compatible iPhone (check for compatibility) on the magnetic wireless charging pad and the device will start charging. To charge your wireless charging-compatible AirPods Make sure your AirPods are placed back into their charging case and that the case is wireless charging capable. Place your AirPods case into the circular indentation on the base of the charger. When placed correctly, the white status indicator light will illuminate on the charger. Your AirPods will charge, whether the lamp is on or off.

( The lamp must be plugged in.) The LED indicator light will turn SOLID WHITE while the Airpods are charging. NOTE: If the status indicator light is not on, there is an error with the charging. Try removing the AirPods case and placing it back down. Using the wireless charging pad To charge your smartphone wirelessly, simply place it on the wireless charging pad, screen facing up. Your device will charge, whether the lamp is on or off. (The lamp must be plugged in.) The LED indicator light will turn SOLID GREEN while the smartphone is charging. Note: Wireless charging only works with wireless charging compatible smartphone devices.You may need to remove your devices case to use the wireless charging feature.Wireless charging cannot work properly through metal objects. If a metal obstruction is detected the LED indicator will ash RED, and will not charge until the obstruction is removed. For other questions regarding wireless charging, refer to your smartphones user manual. ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan uncontrolled environment.Thisequipmentshouldbeinstalledandoperatedwith minimumdistance 20cmbetweentheradiator&yourbody. 2022 Lifeworks Technology Group LLC. New York, NY 10018. iHome is a registered trademark of SDI Technologies Inc., used under license. All brands are registered trademarks of their respective companies. Made In China. WARNING:

DO NOT OPEN OR REPAIR THE PRODUCE, DO NOT USE THE PRODUCT IN A DAMP ENVIRONMENT. CLEAN THE PRODUCT WITH DRY CLOTH CHECK WHETHER THERE ARE METAL ON CHARGING AREA IF LED FLASHED IN RED, IF YES, PLS REMOVE IT AND CONTINUE CHARGING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio / TV technician for help. The device has been evaluated to meet general RF exposure statement. The device can be used in portable exposure condition without restriction. WARNING: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.