33040005 Dynasty Reader User manual

Dynasty Product Brief Version V1.0xxxxx Imatric, Inc Feng Lin Fenglin@Imatrictech.com Imatric, Room 1918, Ruicheng Guo Ji Building, NO 71 Chaoyang Road, Chaoyang District, Beijing, PRC China Imatrictech Confidential Page 1 of 6 Version Description V1.0 Initial release Author Feng Lin Revision History Date Nov. 3rd, 2015 Confidential Information and Copyright This document contains confidential and proprietary information. It is intended for the use of Imatric employees and those vendors with a current Non-disclosure Agreement with Imatric, Inc. No part of this publication may be copied, distributed, stored in a retrieval system, translated into any human or computer language, transmitted in any form or by any means without the prior written consent of Imatric, Inc. Imatrictech Confidential Page 2 of 6 1. Product Brief The Imatric Dynasty Reader Creatively provides the latest commercial mobile payment solution, integrated with the most excellent MSR ICC and CTLS functions in payment industry. Product Description Standard Features Plastic Colour CPU Memory Display Magnetic card reader IC card reader-writer CTLS card reader Communication Black Embedded SOC 32bits RISC processor 64KB SRAM+1MB, 384KB + 4MB Flash 128x64 monochrome Capability of reading ISO7816 1/2/3 track bi-directional swipe ISO 7816 T=0 & T=1 100,000 Insertions EMV Level 1&2, ISO/IEC 14443 TypeA/ TypeB EMV Level 1 Bluetooth 2.1 + EDR & Bluetooth BLE Support for iOS, Android Imatrictech Confidential Page 4 of 6 Physical interface Certifications Power Battery Beeper Environmental 1 USB Type C interface for charging and communications 1 POGO Pin for IOS (UART/USB) and Android (UART) EMV Level 1 & Level 2 Certified 5V, 200mA (5V, 1A For Battery Charge) Fully-integrated Li-ion cell 82db/10cm Working temperature: 0C ~ +40C Relative humidity: 50% ~ 90% (non-condensing) USB-USB Type C cable for recharging the battery Imatric MPOS API Cables API Optional Features/Accessories TBD Related Certification (Certificating Ongoing) FCC Compliance:

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including Interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the usersauthority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver. Imatrictech Confidential Page 5 of 6

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Imatrictech Confidential Page 6 of 6