Ultimate2.0 Users Manual

 

Pay attention to direction of the motor interface. Encoder Motor Encoder Motor (1) 185RPM Encoder Motor 185RPM 25mm DC Motor (1) 185RPM Bracket st y Screw M3 x10

(ome Countersunk (9) Screw M3x8

(pum M4x14 (2) Se NutM4 (2) Encoder Motor 185RPM 0412-220 7x9-B 0824-64 (1) Plane Bearing (1) eo Turntable Quick Release Plate BS Brass Stud M4x16

(= M4x8 (4)

(et M4x14 (4) M4x8 M4x14 Cn o~_ ae M4x22 M4x8 e 0808-24 (2) 25mm Motor. (1) ee" Bracket-72T 90T (1)

a 7a i) M4x16 (4)

[perce M4x30 (4)

NutM4 (4) You have finished 90%

of the assembly.

(uu M4x8 (8) A MegaPi Acrylic (1) Bracket LS Battery Holder (1)

@) Plastic Rivet 4060 (2) SS MegaPi (2) ge Shield forRJ25 (1) Encoder/DC Motor (3) Driver

$} Bluetooth Module 2) MegaPi Acrylic (1) Bracket Eq Plastic Rivet 4100 0824-128 z To correctly assemble the main board onto the acrylic bracket, please pay attention to the direction of the arrows on the bracke Assemble mobile phone onto the robot Mobile Phone Bracket 0324-88 Assemble camera onto the robot 100% Completed Note: The camera and the ball head are not included in this kit. Assembled Diagram Other Building Forms ned according to the instruction. Motor A (86RPM) Self Balancing Robot Detecting Robot 3D Capture B Motor B (185RPM) Motor C (185RPM) Wiring Motor A (86RPM) Visit learn. makeblock.com/ultimate2/

for detailed assembling instructions and 3D models of other forms. Motor 8 @85RPM) Alter assembly, please skip to page 54 for software instruction. Rolling Tank Robotic Ant Catapult Ram Motor (185RPM) App Programming Further Learning -- Graphical Programming 1. App Download. Not all devices are compatible now. Check 1d makeblock.com/c/ on your smart device's browser for confirmation, then download on App store or Google play. Dr Trem ANDRC App Store Google Play 2, Bluetooth Connection. Turn on your robot and the Bluetooth of your smart device; tap on the Robot ID in the search list to pair your smart device with the robot. When the connection indicator LED is solid on, it means that they have been paired successfully. Introduction to mBlock mBlock is an easy-to-use graphical programming environment based on Scratch 2.0 Open Source Code. It provides a quick way for you to program Arduino projects and create interesting interactions. Itis the ideal software to learn programming, control the robot, and realize multiple functions from the robot. The Ultimate 2.0 Robot Kit supports mBlock perfectly, allowing you to program your robot by simply dragging and dropping blocks. eed More Info: ywwimakeblock com Required System: Windows/Mac i Introduction to Arduino POS) rauino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. The Arduino software consists of a development environment (IDE) and the core libraries. The IDE is written in Java and based on the Processing Development Environment. Connection indicator LED More Info: www.arduino.cc 3. Get to know how to use the Makeblock App with Ultimate 2.0, please visit Required System: Windows/Mac/Linux Jearn.makeblock.com/ultimate2-play-with-a Online Arduino Tutorials This online tutorial is great for beginners who want to learn about the basics of writing code while having fun playing with Ultimate 2.0. SsdY Online tutorials: learn. makeblock.com/ultimate2-arduino-program FAQ QL. Why doesnt the robot work after powered on? The main board suddenly restarts when I try to drive motors. a. The robot might be running out of battery. Please charge the batteries or use new batteries. (Note: Please use batteries with low internal resistance which can supply enough power for the robot) b. Make sure you've downloaded related program or firmware for the robot. Otherwise, it won't be running c. Please check if the motors on the robot are wired correctly. Q2. When I try to turn the robot to the left, it turns to the right. Why and how to fix this problem?

a. You may need to switch the order of two wires (Port 1, Port 2) to correct the rotation direction. Q3. Why there is noise after I got the robot tank running?

a. Please check if the driven wheels are correctly installed. b. Please adjust the bearings of the driven wheel to make sure they are not too tight or too loose c. Please make sure encoder disk and the interface of the photoelectric switch are separated from each other. Q4. Why can't connect the app with the robot via Bluetooth?

a. Please visit cl. makebloci.com to check if your smartphone is compatible with the app. b. Please try restarting the app or reset the main control board on the robot. Q5. How to upgrade MegaPi firmware?

a. Visit learn.makeblock.com/ultimate2-play-with-app/ to download the latest firmware and upgrade it for MegaPi via Micro USB. Q6. Where can I find the instruction for other building forms?

a. Visit learn. makeblock.com/ultimate2/ for more building instructions of Ultimate 2.0 robot kitvt Visit learn makeblock.comi/ultimate2-faq/ for more FAQs. Further Exploration -- Electronic Modules Ultrasonic Module is able to measure distance from 3m to 400em. Me Sound Sensor is designed to measure volume. It is suitable for some sound interactive projects, such as an voice-oper-

ated switch. Me 7:Segment Display isa display module with four digit tubes that can show data like speed, time, score, and ete. perature Sensor is a stainless steel tube sensor which is used for measuring temperature. MeR D Module contains four programmable RGB LEDs. The color of each LED can be set by editing components of red, green, and blue. Me PIR Motion Senso is able to detect infrared ray from animals and humans within 6 meters. Me Joystick is normally used to control the moving direction See more on Makeblock platform www.makeblock.com Further exploration -- More Kits XY Plotter Robot Kit mBot Ranger Robot Kit Maker Space kit FCC Ultimate 2.0 FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

# Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC ID:2AH9Q_ULTIMATE2 Product Ultimate 2.0 Model 90040 Limited Warranty This product is warranted against defects in materials and workmanship under normal use by the original purchaser for 90 days after the date of purchase from an authorized retailer. THERE ARE NO OTHER EXPRESS WARRANTIES, This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current: (b) improper or incorrectly performed repairs by non-authorized service facili es; (c) consumables such as fuses or batteries: (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjustment or reinstallation; and (g) claims by persons other than the original purchaser. Should a problem occur that is covered by this warranty, take the product and the original sales receipt as proof of purchase date to the place of purchase. The product, at the warrantors option, unless otherwise provided by law: (a) be repaired without charge for parts and labor; (b) be replaced with the same or a comparable product; or (c) a refund of the purchase price will be provided. All replaced parts and products, and product son which are fund is made, become the property of the warrantor. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. ALLIMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANT ABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR APARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED \NARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, THE WARRANTOR SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY , LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY , INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY , REVENUE, OR PROFIT AND ANY INDIRECT , SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF THE WARRANTOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Warnings

+ Adult supervision and assistance are required.

+ CHOKING HAZARD This product contains small parts and functional sharp points on components. Keep away from children under age 3.

+ Read and follow all instructions in the user guide before using.

+ Retain this user guide for future reference. Battery Notes

+ Use only fresh batteries of the required size and type. Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

+ Dispose of batteries promptly and properly. Do not bum or bury them. If you do not plan to play with the robot for an extended period of time, remove the batteries. Caution

+ Do not insert the wires into telecommunication or network socket outlets.

+ As an extra precaution, check this product regularly for signs of wear or damage.

+ Ensure all wiring connections are correct before inserting batteries and switching on the product. Failure to do so may result in damage to components and the product.

+ Ensure all wires are correctly connected to the battery terminals and other connectors. If the circuit does not work, make sure the plastic insulation of the wire is not obstructing the connection to the connector.

+ When you have finished playing, remove the batteries and switch off the unit before you disconnect the wires. Do not apply any components or parts to the unit other than those provided with this kit.

+ To prevent overheating and damage, do not short - circuit the battery terminals and connectors. Do not block or cover the motor or other moving parts.