submitted | available | document details (if available) | source link |
---|---|---|---|
March 10 2020 | March 10 2020 | Adobe PSL 1.2e for Canon |
various | Module Approval Letter | Cover Letter(s) | 163.98 KiB | March 10 2020 |
Applicant/Grantee _| Microchip Technology Inc.
[Request Approval _| Request Approval Requirements omply (Y/N) Single Approval Requirements
\The frequency
[Physical/discrete may imust ensure that odule will the require set out in provisions r external land antenn detailed i See 2ADHKA093167 Section 15.212 Modular Transmitters /
for Modular D4 ia Hii MCCS Device Conditions Modular radio elements must have the radio This module has shielding case. circuitry shielded. and tuning capacitors be located external to the shield, but be on the module assembly BU itebrterel Conte M ihm olteioKee All modulation and data input(s) are modulation/data input(s) (if such inputs are buffered. The EUT SERMolbats ene ReCe) provided) to the m Tel CMB BTR ice lre Reema Ne ams Uacaitl comply with ments the applicable RSS standard under conditions of excessive data rates or over-modulation. The module shall have its own power The EUT and the RF SiP (System in supply regulation on the module. This is to Package) has integrated LDOs to ensure that the module will comply with provide the required core voltages for the requirements set out in the applicable _ the om unre meee Bclsiblitos EWC B Coe Teel oc ROp mL eRe Cc Te4eme mda and Receiver. power supplying circuitry in the host device which houses the module. Ree eS Mom rem deter uel (e standard regardless of the Rota m co oaciee astra ican ia are Hee host device which houses the module. The module shall comply with the EUT has a SMA connector. Only fo power amplifiers specific Approved Spacer AW NlKotlel BT as n this standard. The identified for use. Equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. The module shall be tested for compliance See Setup Photos with the applicable standard in a stand-
PACs eR ceyeuatsanre-1e (yim MommuetcmeeleewelCmerlellt not be inside another device during testing. The modular transmitter must be Label Exhibit Peilece meno ermucettroya-leince Al eTae
|The specific ithat transmitter provide ithe equirements. lis lequipment Instructions in User Manual
\Addres
(Commission's iS spread lunder laddress laccordance compliance prod ys modular transmitter complies with all rules or operating requirements ordinarily apply to a complete and the manufacturer will Place EACom Tisipa reste everom sue) module to explain any such PREC Amie recipares eels Frito Ute Core rementeereyeuCe-leCoem Coy authorization s compliance with the Instructions are given 1n the installation RF exposure limits in manual for compliance to the RF ections 1.1310 and 2.1093. In addition, | exposure requirements. spectrum transmitters operating Section 15.247 are required to Ramo eee Ree Orcs NN with Section 15.247(b)(4). A may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g. shielding, min1mum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means 1n the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the ey oe Tenet emee rele BrR TO OUmICRIC LUC will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules s demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that aun rey mustemesatel uctis alwa ensured. Signature Name/Title: Steve Caldwell / Vice President Company Name: Microchip Technology Inc. Date: 19 Dec 2019 limited modular approval
This product uses the FCC Data API but is not endorsed or certified by the FCC