A. Approved Antennas Group Rubber Ducky Transit Antennas Patch Antennas Yagi Antennas Omni Directional Part Number MHS031100 MHS031110 MHS031120 MHS031270 MHS031290 MHS034300 MHS034200 MHS034210 MHS034100 MHS034110 MHS034120 MHS034150 MHS031260 MHS034000 MHS031340 MHS034020 MHS034030 MHS034040 Description 2dBi, 2.4GHz Rubber Ducky Antenna RPTNC Swivel 2dBi, 2.4GHz Rubber Ducky Antenna Reverse SMA Swivel 2dBi, 2.4GHz Rubber Ducky Antenna Reverse SMA Straight 3dBi, 2.4GHz Transit Antenna Magnetic Mount with Ground Plane 3dBi, 2.4GHz Transit Antenna Permanent Mount with Ground Plane 3 dBi, 2.4GHz Compact Omni Antenna w/ Magnetic Base Mounts for Transit Antennas have a RPTNC Pigtail 8 dBi, 2.4GHz Mini Flat Patch Directional Antenna RPTNC Pigtail 14 dBi, 2.4GHz Flat Patch Directional Antenna RPTNC Pigtail 9 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 12 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 14 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 14.5 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail 5 dBi, Omni Directional Antenna RPTNC Pigtail 6 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail 8 dBi, Omni Directional Antenna RPTNC Pigtail 10.5 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail 12 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail 15 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail WARNING:
Changes or modifications not expressly approved by Microhard Systems Inc. could void the users authority to operate the equipment. This device has been tested with MCX and Reverse Polarity SMA connectors with the antennas listed in Appendix A When integrated in OEM products, fixed antennas require installation preventing end-users from replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). Please Contact Microhard Systems Inc. if you need more information. Industry Canada: This device has been designed to operate with the antennas listed below, and having a maximum gain of 14.2 dBi. Antennas not included in this list or having a gain greater than 14.2 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. 10 MHX2421 Operating Manual: Glossary