submitted | available | document details (if available) | source link |
---|---|---|---|
September 05 2012 | September 05 2012 | Microsoft Word - XA58-26 manual_120504.doc pdscn-88 Ultra PDF |
various | Users Manual | Users Manual | 2.52 MiB | September 05 2012 |
High Power MiniPCI 5.8GHz XA58-26 Compliant with IEEE 802.11a standard Up to 26dBm output power with Built-in ESD Protection RF ESD/EMP Immunity Threshold: 15KeV Supports Atheros Proprietary "Super Mode" delivering up to 108 Mbps data link rate High efficiency dual-PA design High Performance combined with Low Power Consumption Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard) Single MMCX/U.FL Antenna Connector Suitable for Embeded System or OEM Project Affordable and Ideal for a Variety of Applications Features Technical Specifications Atheros AR54xx seriesAR5414 Chipset Host Interface 32-bit mini-PCI Type IIIA+ (1.85mm longer than IIIA type) Operating Voltage 3.3 VDC Power Consumption Antenna Connector Standards Conformance 11a Cont. Tx @6M 11a Cont. Rx Standby 3.5W 1.9W 1.4W 1 x MMCX IEEE 802.11a: 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps Super-A:
108Mbps 96Mbps 72Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 6Mbps Frequency Range IEEE 802.11a 5.725 ~ 5.850 GHz (US & Canada) Modulation Techniques Certification ROHS Compliance Temperature Range Humidity Dimension Weight OFMD: BPSK, QPSK, 16-QAM, 64-QAM FCC, CE Yes Operating: -20C to 70C Storage: -40C to 90 Operating: 5% to 95% (non-condensing) Storage: Max.90% (non-condensing) 59.6 x52.8x 5.5 mm 20 grams WLM54A-26-ESD MINIPCI CARD RADIO TX SPECIFICATIONS 5600MHz 5700MHz 5785MHz 6Mbps 26dBm 9Mbps 26dBm 12Mbps 26dBm 18Mbps 26dBm 24Mbps 26dBm 36Mbps 24dBm 48Mbps 23dBm 54Mbps 22dBm 26dBm 26dBm 26dBm 26dBm 26dBm 24dBm 23dBm 22dBm 26dBm 26dBm 26dBm 26dBm 26dBm 24dBm 23dBm 22dBm 5825MHz Tolerance 26dBm +1.0/-1.5 dB 26dBm +1.0/-1.5 dB 26dBm +1.0/-1.5 dB 26dBm +1.0/-1.5 dB 26dBm +1.0/-1.5 dB 24dBm +1.0/-1.5 dB 23dBm +1.0/-1.5 dB 22dBm +1.0/-1.5 dB 5GHz 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
-96dBm
-96dBm
-95dBm
-88dBm
-86dBm
-83dBm
-79dBm
-76dBm DataRate Sensitivity RX SPECIFICATIONS Tolerance 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 5MHz 10MHz 20MHz 40MHz ADJUSTABLE CHANNEL SIZE SUPPORT 5GHz ESD CABLE SPECIFICATIONS 26cm length Copper End of ESD Cable tied to Earth Ground Cable Dimensions Terminal Material Attachment Procedure ORDERING INFORMATION CODES WLM54A26ESD 8BS Version ESD CARTON DIMENSIONS For 50 pcs / carton, 0.45m*0.45m*0.24m/0.006=8.1KG
Module grounding cable included Configurations are subjected to change without notice Please contact Compex sales representatives for other available configurations Compliance Information FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
(5) Outdoor Operations in the 5.15~5.25GHz band is prohibited. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. WARNING: This Wireless Mini PCI Adapter does not support ad-hoc mode Function The Host system using XA58-26, should have label indicated "Contains FCC ID: NS912XA58-26"
IC warning
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- French:
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
Exposure to Radio Frequency Radiation:
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Transmitter Antenna Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (Model XA58-26, IC: 3143A-12XA5826) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. The max antenna gain is 2.00 dBi for test The Host system using XA58-26, should have label indicated "Contains IC: 3143A-12XA5826"
DIMENSIONS DRAWING Compex Systems Pte., Ltd. 135 Joo Seng Road, PM Industrial Building #08-01, Singapore 368363 Tel: (65) 6286 2086 Fax: (65) 6280-9947 Email: sales@compex.com.sg Compex (Suzhou) Co., Ltd. NO.12, ChuangTou Industrial Square, LouFeng North, Suzhou Industrial Park, Suzhou, Jiangsu Province, China 215122 Tel: (86)-512-62950050 Fax: (86)-512-62950026 Copyright 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specification is subject to change without notice. Datasheet Version: V 1.1.1 Rocky100528 For more information, visit www.compex.com.sg
This product uses the FCC Data API but is not endorsed or certified by the FCC