| submitted | available | document details (if available) | source link |
|---|---|---|---|
| February 14 2020 | July 21 2020 |
| various | User Manual rev2 | Users Manual | 622.67 KiB | February 14 2020 / July 21 2020 |
NetMetal ac2 Quickstart Please follow these quick steps to set up your device:
Connect an external antenna to the SMA connector (see Antenna usage);
Open the upper cover (see Removing upper and bottom covers);
Open the bottom cover (see Removing upper and bottom covers);
Open network connections on your PC, mobile phone or other device and search for MikroTik wireless Connect the device to the power source (see Powering);
network and connect to it;
The configuration can be done through the wireless network using a web browser or mobile app - (see MikroTik mobile app). Alternatively, you can use a WinBox configuration tool http://mt.lv/winbox;
Once connected to the wireless network, open http://192.168.88.1 in your web browser to start configuration, user name: admin and there is no password by default;
When using mobile application choose Quick setup and it will guide you through all necessary configuration in six easy steps;
Depending on the antenna used, you must set its gain in the RouterOS software to ensure that EIRP meets the limit set by the local authorities. This is done in the Wireless menu;
We recommend clicking the Check for updates button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability. To personalize your wireless network, SSID can be changed in the fields Network Name;
Choose your country on the left side of the screen in the field Country, to apply country regulation settings. Set up your wireless network password in the field WiFi Password the password must be at least eight symbols. Set up your router password in the bottom field Password to the right and repeat it in the field Confirm Password, it will be used to login next time. Click on the Apply Configuration to save changes. Powering The device accepts power in the following ways:
Ethernet port accepts PoE 802.3af/at 24-57 V DC Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 12-57 V DC.
Connecting to a PoE Adapter:
1. Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter;
2. Connect an Ethernet cable from your local network (LAN) to the PoE adapter;
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet. MikroTik mobile app Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point. Install and open application. 1. Scan QR code and choose your preferred OS. 2. 3. By default, the IP address and user name will be already entered. 4. Click Connect to establish a connection to your device through a wireless network. 5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps. 6. An advanced menu is available to fully configure all necessary settings. See mikrotik.com/products for the latest version of this document. Page 1, Document #53381 Modified on: 30.JAN.2020 Removing upper and bottom covers 1. To remove the upper cover, unscrew two captive screws and slide it off the main body. Do not remove screws completely, when assembling tightening torque 0.2 Nm. 2. To remove the bottom cover, release clips for both fasteners and cover will be free to open. Mounting The NetMetal ac2 is designed to be used outdoors and mounted on pole or DIN rail. When mounting, please ensure that cable feed is pointing downwards. The IP rating scale of this device is IP55. We recommend using Cat6 shielded cables. Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of this equipment in the residential environment could cause radio interference. Mounting and configuration of this device should be done by a qualified person. The mounting hose clamp is provided with the package. 1. Guide hose clamp through the opening on the back of the device. 2. Attach to the pole or mast. 3. Align and secure by hose clamp screw using PH2 screwdriver.
* The device should be always placed by TOP cover facing upwards. See mikrotik.com/products for the latest version of this document. Page 2, Document #53381 Modified on: 30.JAN.2020 When mounting on DIN rail, please find special bracket in the package and secure it with four screws to the back of the unit. With attached mounting bracket you will be able to slide the device on the DIN rail. Grounding The installation infrastructure (towers and masts), as well as the router itself, must be properly grounded. The device includes a grounding wire attachment screw. Attach your grounding wire to the grounding screw, then attach the other end of the grounding wire to the grounded mast. Please secure all loose Ethernet cables and antenna cables to the pole or mast approximately at 30cm from the device, so that the cable weight is not pulling the ports and connectors. Front status LED behavior RouterOS allows configuring each LEDs activity the way that user wishes. It is possible to configure the LEDs to display wireless strength, blink the LEDs on interface traffic activity and many other options. For further information please visit https://wiki.mikrotik.com/wiki/Manual:System/LEDS Default factory configuration for this device:
1. Solid Blue The device is powered on. 2. Solid Green Active SFP port. 3. Solid Green Active Ethernet port. 4.
- 8. Solid Green The set of five green LEDs, shows the signal strength. See mikrotik.com/products for the latest version of this document. Page 3, Document #53381 Modified on: 30.JAN.2020 Configuration The device is configured as a wireless access point, with the Ethernet port configured as a DHCP client, for connecting to your ISP router or switch. A DHCP server is configured on the wireless interface. We recommend clicking the Check for updates button in the QuickSet menu, as updating your RouterOS software to the latest version ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to conform with local regulations. RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: http://mt.lv/help. In case IP connection is not available, the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side
(all access is blocked from the Internet port by default). For recovery purposes, it is possible to boot the device for reinstallation, see section Reset button. Expansion slots and ports Gigabit Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight or MiniPCIe slot. crossover cable can be used for connecting to other network devices. SFP port. External SMA antenna connectors. Integrated Wireless module operating at 2.4 GHz, 802.11b/g/n protocol. Integrated Wireless module operating at 5 GHz, 802.11a/n/ac protocol. USB type-A. Reset button The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds). Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds). Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery. Accessories Package includes the following accessories that come with the device:
EU Switching Power Supply 48 V 0.95 A 45.6 W. Gigabit POE injector. K-27 DIN rail bracket mounting set. Hose clamp 40/60 w2 A2 9 mm. Please visit wiki pages for MikroTik SFP module compatibility table:
https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table See mikrotik.com/products for the latest version of this document. Page 4, Document #53381 Modified on: 30.JAN.2020 MiniPCIe slot usage This NetMetal version is without modem installed. To install the module you will need to remove the upper cover and open bottom cover (see Removing upper and bottom covers). Installing a miniPCIe module should be done by a qualified person, please follow safety precautions when handling electrical equipment:
1. Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical discharge (ESD) damage. 2. Removing four screws using the PH2 screwdriver. 3. Remove the top cover by lifting it. 4. Locate the miniPCIe slot on the PCB and remove two factory attached screws. 5. Attach provided a thick thermal pad to the card, and install the card into miniPCIe slot so that the thermal pad is between PCB and card. 6. Secure card in place using previously removed two screws. 7. Attach the grey uFL connector to the MAIN antenna connector of the modem, attach the black cable to the secondary (or AUX) connector. 8. Attach a thinner thermal pad to the top of the card. 9. Drill a hole for cables using 6.5 mm drill to provide an opening for card antenna cables. See mikrotik.com/products for the latest version of this document. Page 5, Document #53381 Modified on: 30.JAN.2020 10. Guide through the card cables. 11. Reassemble. When assembling make sure the rubber sealing is placed firmly around the case for equal spread to prevent water contamination. Case screw torque 2,5 Nm. When mounting the antenna for the installed card, please make sure to keep them separate at a good distance from Wireless antennas. Antenna usage Antenna Installation. WARNING: It is the installer's responsibility to ensure that when using the authorized antennas in the United States (or where FCC rules apply); only those antennas certified with the product are used. The use of any antenna other than those certified with the product is expressly forbidden in accordance with FCC rules CFR47 part 15.204. The installer should configure the output power level of antennas, according to country regulations and per antenna type. Professional installation is required for equipment with connectors to ensure compliance with health and safety issues. LIST OF APPROVED 2GHz ANTENNAS (Impedance 50 Ohm):
5 dBi Dipole ACOMNIRPSMA 3.6 dBi Omni-directional HGO-antenna-OUT LIST OF APPROVED 5GHz ANTENNAS (Impedance 50 Ohm):
30 dBi Parabolic dish MTAD-5G-30D3 19 dBi Sector MTAS-5G-19D120 6.68 dBi Omni-directional HGO-antenna-OUT Antennas of the same type and lower gain than those listed above may be used in compliance with certification. More information on the wireless interface: https://wiki.mikrotik.com/wiki/Manual:Interface/Wireless Specifications For more information about this product, specifications, pictures, downloads and test results please visit our web page: https://mikrotik.com/product/NetMetal_ac2 Operating system support The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource. Other operating systems have not been tested. Safety Warnings Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Ultimate disposal of this product should be handled according to all national laws and regulations. The Installation of the equipment must comply with local and national electrical codes. This unit is intended to be mounted on a pole. Please read the wall mounting instructions carefully before beginning installation. Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system. Read the installation instructions before connecting the system to the power source. It is the customers responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed. See mikrotik.com/products for the latest version of this document. Page 6, Document #53381 Modified on: 30.JAN.2020 Federal Communication Commission Interference Statement FCC ID:TV7D2352AC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. For use of CBRS bands, the CBSD Category of the final Host equipment will be dependent on the power settings and antenna gain used. IMPORTANT: Exposure to Radio Frequency Radiation. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body. See mikrotik.com/products for the latest version of this document. Page 7, Document #53381 Modified on: 30.JAN.2020 Innovation, Science and Economic Development Canada IC:7442A-D2352AC device. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est. IMPORTANT: Exposure to Radio Frequency Radiation. This equipment complies with the IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body. Cet equipement est conforme aux limites d'exposition au rayonnement IC definies pour un environnement non controle. Cet equipement doit etre installe et utilise a une distance minimale de 20 cm entre le radiateur et toute partie de votre corps. CAN ICES-3 (B)/NMB-3(B)FCC The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande de 5150 5250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. This radio transmitter 7442A-D2352AC has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. LIST OF APPROVED 2GHz ANTENNAS (Impedance 50 Ohm):
5 dBi Dipole ACOMNIRPSMA 3.6 dBi Omni-directional HGO-antenna-OUT LIST OF APPROVED 5GHz ANTENNAS (Impedance 50 Ohm):
30 dBi Parabolic dish MTAD-5G-30D3 19 dBi Sector MTAS-5G-19D120 6.68 dBi Omni-directional HGO-antenna-OUT See mikrotik.com/products for the latest version of this document. Page 8, Document #53381 Modified on: 30.JAN.2020 CE Declaration of Conformity Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039. BG Mikrotkls SIA , RouterBOARD 2014/53/.
: https://mikrotik.com/products CS Tmto Mikrotkls SIA prohlauje, e typ rdiovho zazen RouterBOARD je v souladu se smrnic 2014/53/EU. pln znn EU prohlen o shod je k dispozici na tto internetov adrese: https://mikrotik.com/products DA Hermed erklrer Mikrotkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-
overensstemmelseserklringens fulde tekst kan findes p flgende internetadresse: https://mikrotik.com/products DE Hiermit erklrt Mikrotkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-
Konformittserklrung ist unter der folgenden Internetadresse verfgbar: https://mikrotik.com/products EL / Mikrotkls SIA , RouterBOARD 2014/53/.
: https://mikrotik.com/products EN Hereby, Mikrotkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://mikrotik.com/products ES Por la presente, Mikrotkls SIA declara que el tipo de equipo radioelctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto completo de la declaracin UE de conformidad est disponible en la direccin Internet siguiente: https://mikrotik.com/products ET Kesolevaga deklareerib Mikrotkls SIA , et kesolev raadioseadme tp RouterBOARD vastab direktiivi 2014/53/EL nuetele. ELi vastavusdeklaratsiooni tielik tekst on kttesaadav jrgmisel internetiaadressil: https://mikrotik.com/products FI Mikrotkls SIA vakuuttaa, ett radiolaitetyyppi RouterBOARD on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen tysimittainen teksti on saatavilla seuraavassa internetosoitteessa: https://mikrotik.com/products FR Le soussign, Mikrotkls SIA , dclare que l'quipement radiolectrique du type RouterBOARD est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible l'adresse internet suivante: https://mikrotik.com/products HR Mikrotkls SIA ovime izjavljuje da je radijska oprema tipa RouterBOARD u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: https://mikrotik.com/products HU Mikrotkls SIA igazolja, hogy a RouterBOARD tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU-megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: https://mikrotik.com/products IT Il fabbricante, Mikrotkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformit UE disponibile al seguente indirizzo Internet: https://mikrotik.com/products IS Hr me lsir Mikrotkls SIA v yfir a RouterBOARD er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 2014/53/EU. Fullur texti ESB samrmisyfirlsingar er a finna eftirfarandi veffangi: https://mikrotik.com/products LT A, Mikrotkls SIA , patvirtinu, kad radijo rengini tipas RouterBOARD atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas LV Ar o Mikrotkls SIA deklar, ka radioiekrta RouterBOARD atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams prieinamas iuo interneto adresu: https://mikrotik.com/products d interneta vietn: https://mikrotik.com/products MT B'dan, Mikrotkls SIA , niddikjara li dan it-tip ta' tagmir tar-radju RouterBOARD huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-
dikjarazzjoni ta' konformit tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ej: https://mikrotik.com/products NL Hierbij verklaar ik, Mikrotkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: https://mikrotik.com/products NO Mikrotkls SIA erklrer herved at utstyret RouterBOARD er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklringen er tilgjengelig p flgende internettadresse: https://mikrotik.com/products PL Mikrotkls SIA niniejszym owiadcza, e typ urzdzenia radiowego RouterBOARD jest zgodny z dyrektyw 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: https://mikrotik.com/products PT O(a) abaixo assinado(a) Mikrotkls SIA declara que o presente tipo de equipamento de rdio RouterBOARD est em conformidade com a Diretiva 2014/53/UE. O texto integral da declarao de conformidade est disponvel no seguinte endereo de Internet:
https://mikrotik.com/products RO Prin prezenta, Mikrotkls SIA declar c tipul de echipamente radio RouterBOARD este n conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: https://mikrotik.com/products SK Mikrotkls SIA tmto vyhlasuje, e rdiov zariadenie typu RouterBOARD je v slade so smernicou 2014/53/E. pln E vyhlsenie o zhode je k dispozcii na tejto internetovej adrese: https://mikrotik.com/products SL Mikrotkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: https://mikrotik.com/products SV Hrmed frskrar Mikrotkls SIA att denna typ av radioutrustning RouterBOARD verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten till EU-frskran om verensstmmelse finns p fljande webbadress: https://mikrotik.com/products MPE statement This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body, unless specifically stated otherwise in page 1 of this document. In RouterOS you must specify your country, to make sure local wireless regulations are observed. Frequency bands terms of use Frequency range (for applicable models) Channels used Maximum Output Power (EIRP) Restriction 2412-2472 MHz 5150-5250 MHz 5250-5350 MHz 5470-5725 MHz 1 - 13 26 - 48 52 - 64 100 - 140 20 dBm 23 dBm 20 dBm 27 dBm Without any restriction to use in all EU Member States Restricted to indoor use only*
Restricted to indoor use only*
Without any restriction to use in all EU Member States
* It is the customers responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be professionally installed!
Note. Information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this document. See mikrotik.com/products for the latest version of this document. Page 9, Document #53381 Modified on: 30.JAN.2020 BG. : , . 192.168.88.1 ,
. https://mt.lv/help-bg CS. Nvod k pouit: Pipojte napjec adaptr k zapnut pstroje. Otevete 192.168.88.1 ve webovm prohlei pro konfiguraci produktu. Vce informac najdete v https://mt.lv/help-cs DA. Instruktionsbog: Tilslut strmadapteren for at tnde for enheden. bn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere information i https://mt.lv/help-da DE. Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gert einzuschalten. ffnen Sie 192.168.88.1 in einem Web-Browser, um das Produkt zu konfigurieren. Weitere Informationen im https://mt.lv/help-de EL. : . 192.168.88.1 Web . https://mt.lv/help-el EN. Instruction manual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More information on https://mt.lv/help ES. Manual de instrucciones: Conecte el adaptador de alimentacin para encender la unidad. Abra 192.168.88.1 en un navegador web para configurar el producto. Ms informacin en https://mt.lv/help-es ET. Kasutusjuhend: hendage toiteadapter seadme sissellitamiseks. Avatud 192.168.88.1 in veebilehitseja seadistada toodet. Rohkem teavet https://mt.lv/help-et FI. Kyttohje: Kytke virtalhde plle laitteen. Avaa 192.168.88.1 in selaimen mritt tuotteen. Lis tietoa https://mt.lv/help-fi FR. Mode d'emploi: Connectez l'adaptateur d'alimentation pour allumer l'appareil. Ouvrez 192.168.88.1 dans un navigateur Web pour configurer le produit. Plus d'informations dans https://mt.lv/help-fr HR. Uputa za uporabu: Prikljuite napajanje i ukljuite ureaj. Za konfiguraciju ureaja u pregledniku otvorite 192.168.88.1. Vie informacija je na https://mt.lv/help-hr HU. Hasznlati utasts: Csatlakoztassa a hlzati adaptert a kszlk bekapcsolshoz. Megnyitsa 192.168.88.1 egy webbngszben belltani a termket. Tbb informci https://mt.lv/help-hu IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unit. Aprire 192.168.88.1 in un browser Web per configurare il prodotto. Maggiori informazioni in https://mt.lv/help-it IS. Notkunarleibeiningar: Tengdu straumbreytinn til a kveikja tkinu. Opnau 192.168.88.1 vafra til a stilla a. Nnari upplsingar https://mt.lv/help-is NO. Instruksjonsmanual: Koble strmadapteren for sl p enheten. pne 192.168.88.1 i nettleseren din for konfigurere den. Mer informasjon p https://mt.lv/help-no LT. Naudojimosi instrukcija: Prijunkite maitinimo adapter junkite rengin. interneto narykl 192.168.88.1 Atidarykite galite konfigruoti gamin. Daugiau informacijos rasite https://mt.lv/help-lt LV. Lietoanas instrukcija: Pievienojiet Strvas adapteri, lai ieslgtu ierci. Atvrt 192.168.88.1 ar interneta prlku, lai konfigurtu produktu. Plaka informcija https://mt.lv/help-lv MT. Manwal tal-istruzzjoni: Qabbad l-adapter tal-qawwa biex iddawwar it-tagmir. Ifta 192.168.88.1 fil-web browser tiegek, biex jii kkonfigurat. Aktar informazzjoni fuq https://mt.lv/help-mt NL. Handleiding: Sluit voedingsadapter aan op het apparaat in te schakelen. Open 192.168.88.1 in een webbrowser om het product te configureren. Meer informatie in https://mt.lv/help-nl PL. Instrukcja obsugi: Podcz adapter zasilania, aby wczy urzdzenie. Otwrz 192.168.88.1 w przegldarce internetowej, aby skonfigurowa urzdzenie. Wicej informacji w https://mt.lv/help-pl PT. Manual de instrues: Conecte o adaptador de alimentao para ligar o aparelho. Abra 192.168.88.1 em um navegador da web para configurar o produto. Mais informaes em https://mt.lv/help-pt RO. Instruciuni de utilizare: Conectai adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 ntr-un browser web pentru a configura produsul. Mai multe informaii n https://mt.lv/help-ro SK. Navodila: Prikljuite napajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Ve informacij v https://mt.lv/help-sk SL. Nvod na pouitie: Pripojte napjac adaptr k zapnutiu prstroja. Otvorte 192.168.88.1 vo webovom prehliadai pre konfigurciu produktu. Viac informci njdete v https://mt.lv/help-sl SV. Instruktionsmanual: Anslut ntadaptern fr att sl p enheten. ppna 192.168.88.1 i en webblsare fr att konfigurera produkten. Mer information p https://mt.lv/help-sv NO. Bruksanvisningen: Koble strmadapteren for sl p enheten. pne 192.168.88.1 i en nettleser for konfigurere produktet. Mer informasjon p https://mt.lv/help-no RU. : . 192.168.88.1 -
. https://mt.lv/help-ru Web 192.168.88.1 CN. UA. : . 192.168.88.1 -
. : https://mt.lv/help-ua https://mt.lv/help-zh See mikrotik.com/products for the latest version of this document. Page 10, Document #53381 Modified on: 30.JAN.2020
This product uses the FCC Data API but is not endorsed or certified by the FCC