Tune up procedure Tune up procedure shall be over the power range or at specific operating power levels. 1. It must provide an operational voltage (3.6 ~ 4.35V DC) to turn onthe device and on one certain channel in service mode by means of company proprietary software. The Base station simulator measures this device for their specific RF characteristics. 2. 3. The maximum gains of each individual device are adjusted until the target value met. RF average conduct power range 1. GSM850 Output power of range:
GSM/GPRS (GMSK):
GSM:32.5dBm0.5dBm 1TXslots:32.5dBm0.5dBm 2TXslots:29.5dBm0.6dBm 3TXslots:28dBm0.5dBm 4TXslots:26.5dBm0.8dBm EGPRS:
1TXslots:27dBm1dBm 2TXslots:26dBm1dBm 3TXslots:24dBm1dBm 4TXslots:23dBm1dBm 2. PCS1900 Output power of range:
GSM/GPRS (GMSK):
GSM: 29dBm1dBm 1TXslot:29dBm1dBm 2TXslots:28.5dBm1dBm 3TXslots:27dBm0.5dBm 4TXslots:26dBm0.5dBm EGPRS:
1TXslots:26dBm1dBm 2TXslots:25dBm1dBm 3TXslots:23dBm1dBm 4TXslots:22dBm1dBm 3. WCDMA WCDMA1900: PWR =21.51.5dBm WCDMA850: PWR = 21.51.5dBm LTE 7 PWR =212dBm 4. BT BT:4dBm1dBmBasic Rate BLE:4dBm1dBm 5. 1.8 WIFI 802.11b PWR=181dBm 802.11g PWR=161dBm 802.11n HT20 PWR=161dBm 802.11n HT40 PWR=15.51dBm