| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 19 2018 | November 15 2018 | C.eps dreamsummit Acrobat Distiller 10.1.1 (Macintosh) |
| various | User manual | Users Manual | 2.86 MiB | May 19 2018 / November 15 2018 |
MODEL NO.: RPJ129 Smart Android Wi-Fi Home Theater Projector INSTRUCTION MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT This product is manufactured and sold by Curtis International Ltd. RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Ltd. Any other product, service, company, trade or product name and logo referenced herein are neither endorsed nor sponsored by RCA Trademark Management or its affiliates. Important Safety Instrucons 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier) that product heat. 9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11. Unplug this apparatus during lightning storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over. 1 Addional Warnings and Precauons 1. Do not look directly into the projector light. 2. Dont touch the projector lens 3. Mains adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains those specified may result in hazardous radiation exposure. plug should be disconnected from the mains socket outlet completely. 4. CAUTION: Use of controls or adjustments or performance of procedures other than 5. WARNING: Changes or modified to this unit not expressly approved by the party 6. WARNING: Use of this unit near fluorescent lighting may cause interference regarding responsible for compliance could void the users authority to operate the equipment. use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. 7. WARNING: Shock hazard - Do Not Open. 8. Caution and marking information is located at the rear or bottom of the apparatus. 9. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to 10. Objects filled with liquids, such as vases, shall not be placed on the apparatus. rain, moisture, dripping, or splashing. 2 FCC ID:2ANH7696PJ38 FCC Warning This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an The distance between user and products should be no less than 20cm experienced radio/TV technician for help. In The Box OK 1 4 7 SETUP 2 5 8 00 3 6 9 Main unit MODEL NO.: RPJ129 Smart Android Wi-Fi Home Theater Projector INSTRUCTION MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT This product is manufactured and sold by Curtis International Ltd. RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Ltd. Any other product, service, company, trade or product name and logo referenced herein are neither endorsed nor sponsored by RCA Trademark Management or its affiliates. Remote AC Power Adapter Lens Cover User Manual 3 Table of Contents Important Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - -
P1 Additional Warnings and Precautions - - - - - - - - - - - - - - - - - - - - - - P2 FCC Warning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P3 In The Box - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P3 Table of Contents --
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P4 Remove & Close the Lens Cover - - - - - - - - - - - - - - - - - - - - - - - - - - P5 Placement of Your Projector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P5 To Reduce Image Distortion - - - - - - - - - - - - - - - - - - - - P6 Distance Between The Projector And Screen - - - - - - - - - - - - - - - - P6 Installing your projector in the Ceiling - - - - - - - - - - - - - - - - - - - - - P6 Adjust the Vertical Position - - - - - - - - - - - - - - - - - - - - - - - - - - - - P7 Adjust the Focus and Keystone - - - - - - - - - - - - - - - - - - - - - - - P7 Controls of Remote - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P8 Install / Remove Batteries of Remote - - - - - - - - - - - - - - - - - - - - - - - P8
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P9 Controls of Projector Install Power Adapter
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P10 Main Button Operation - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - -- P10 Connect HDMI show the Image On Projector Screen - - - - - - - - - P11 Connect AV Show The Image On Projector Screen - - - - - - - - - - - - P11 Connect VGA Show The Image On Projector Screen - - - - - - - - - - - P12 Connect Audio Output (Aux Out / Line Out) - - - - - - - - - - - - P13 Install USB Device - - - - - - - - - - - - - - - - - - - - - - - - - P13 Using USB Playback (Media Player) - - - - - - - - - - - - - - - - - - - - - - - P14 Using Projector Menu 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P15 Using Projector Menu 2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P16 Using Projector Menu 3 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P17 Using Projector Menu 4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P17 Projector Home Screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P18 Connect to Wi-Fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P18 The Menu Settings- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P19 Install and Uninstall Apps- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P20 Video Streaming (playing online TV and movies) - - - - - - - - - - - - - P20 Browser Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P20 Multi-screen Interactive Connection for Phone and Projector - - - - P21 Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P22 4 Remove & Close The Lens Cover LENS COVER LENS COVER REMOVE CLOSE Placement of Your Projector Your projector can be installed in four different configurations ( see picture below):
Front Table:
Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability. Rear Table:
Select this location with the projector placed near the floor behind the screen. NOTE: A special rear projection screen is required. Front Ceiling:
Select this location with the projector suspended upside-down from the ceiling in front of the screen. NOTE: A projector mount is required to install the projector in a ceiling. Rear Ceiling:
Select this location with the projector suspended upside-down from the ceiling behind the screen. NOTE: A projector mount is required to install the projector in a ceiling. A special rear projection screen is required. Front Ceiling Rear Ceiling 5 To reduce Image Distoron Move the projector as close to the center of the screen as possible. The light beam from the projector should be perpendicular to the screen for a rectangular or square image. Distance BetweenThe Projector and Screen Measure the distance between the projector and where you want to position the screen. This is the projection distance. E Z I S
N E E R C S Distance 2.0m 2.38m 2.74m 2.82m 3.27m 3.87m 4.7m 5.65m DISTANCE Screen Size 60 inch 72 inch 84 inch 86 inch 100 inch 120 inch 140 inch 160 inch Installing Your Projector In the Ceiling When installing the projector in the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount. Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask the advice from an installation professorial. NOTE: Projector mount and screw(s) not included FIX HANGER HOLES CEILING HANGER 6 Adjust The Vercal Posion Adjust the projector's vertical position by following the illustrations below:
SCREEN VERTICAL DIMENSION PROJECTOR SCREEN VERTICAL DIMENSION SCREEN VERTICAL DIMENSION PROJECTOR PROJECTOR Press the "PUSH" button (Button 3 page 9) to extend the front leg and adjust the vertical height of the projector. Adjust The Focus And Keystone Follow below picture to adjust the focus and trapezoidal screen. Adjust the focus by turning the lens while observing the image pixels near the center of the screen. Optimal focus is obtained when the pixels are clearly visible. Depending on the projected screen size, the focus near the screen edges may be less sharp than the screen center. FOCUS ADJ. KNOB Keystone image is created when the projector lens is projected from above or below the center of the screen. Keystone correction restores the distorted image to a rectangular or square shape. KEYSTONE CORRECTION KNOB KEYSTONE DC IN HDMI 1 HDMI 2 VIDEO USB 1 USB 2 VGA 7 Controls of Remote POWER ON/OFF SKIP NEXT/PREVIOUS FILE PLAY/PAUSE SOURCE SELECTOR SELECT VOLUME SOUND MUTE AUDIO SOUND SEARCH FORWARD OR REWIND SHOW MOUSE CURSOR ENTER TO MENU OK OK OK NAVIGATOR TO HOME PAGE SETUP TO SETUP PAGE EXIT THE MENU 0~9 NUMERIC BUTTON BACK SPACE 1 4 7 SETUP 2 5 8 0 3 6 9 Install / Remove Baeries of Remote Remove the battery compartment cover on the back of the remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct batteries (not included), referring to the polarity markings. Finally, replace the cover. NOTES:
l Batteries shall not be exposed to excessive heat such as placing under the sunlight or near a fire. Please make sure the batteries are installed with their correct polarities. Do not mix old and new batteries. Use only the same type of batteries. Do not dispose of the batteries in fire, battery may explode or leak. Do not recharge a non-rechargeable battery. l l l l l B A T T E R Y D O O R
+ -
A A A
/
U M 4 A A A
/
U M 4
- +
8 4 9 5 10 Controls of Projector PUSH 2 1 3 11 12 13 14 VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DC IN KEYSTONE 15 16 17 18 19 5 6 7 8 IR Sensor ( Front Side) 1. 2. LENS 3. ANGEL ADJ. Button 4. FOCUS ADJ. Knob 5. NAVIGATOR Buttons 6. RETURN Button 7. POWER on Indicator 8. POWER Button 9. SOURCE Button 10. SETUP Button 11. KEYSTONE ADJ. Knob 12. VIDEO IN Jack 13. USB1 / USB2 Port 14. HDMI 1/ HDMI 2 Port 15. DC IN jack 16. AUDIO OUT R/L Jack 17. IR Sensor (Rear Side) 18. AUDIO IN R/L Jack 19. VGA IN Jack 9 Install Power Adapter Follow below picture to connect power adapter Connect small end of adapter FIRST. Plug the adapter body to power outlet. Mains Socket VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DC IN KEYSTONE Main Buon Operaon
- Press the button to switch on the unit, press again to turn off.
/ SOURCE - Press the button to select input source.
- Press the button to enter Menu in Streaming Apps mode
. OK OK
- Press the buttons to navigate and select screen item of menu.
- Press the button to return to previous status or exit the menu.
- Press the buttons to fast search forward and rewind.
- Press the buttons to search next or previous file. VOL+ / VOL - Press the buttons to adjust the sound level.
- Press the button to play/pause the playback.
-
Press the button to show mouse cursor in Streaming Apps input source, press the button again to switch back to navigation using the directional buttons. Please use the mouse cursor when entering text and selecting items, use the direction buttons for screen scrolling. Press the button to return to Streaming Apps Home Screen.
-
SETUP
-Press the button to projector SETUP menu
- Press the button to delete character and backspace in Streaming Apps mode 0~9 - Press the button to enter numbers in Streaming Apps mode
- Press the button to mute the audio. Press again to resume. 10 Connect HDMI Show The Image On Projector Screen Refer to the following picture to connect a set top box, a BD/DVD player or a streaming player to the HDMI input. 1. Turn off the unit before connect HDMI cable. 2. 3. Aer connect, press the Press the connected device will be shown on projector screen. buon to turn on unit and power indicator will light GREEN
/ SOURCE buon to select HDMI 1 or HDMI 2 and the video from the 4. Press the button to turn off unit power. CABLE NOTINCLUDE HDMI CABLE Video Player VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DDC IN KEYSTONE HDMI Streaming player (not included) Important Note:
If there is no sound from the internal speakers when playing media contents from a set top box, BD/DVD or streaming players connecting to the HDMI input, please check the set top box or the player's digital audio settings and make sure it is set to "PCM Stereo" mode. Connect AV Show The Image On Projector Screen Follow below picture to connect AV cable and device. 1. Turn off the unit before connect AV cable. 2. Use AV cable to connect follow below figure 3. After connect, press the button to turn on unit and power indicator will light GREEN 4. Press the
/ SOURCE button to select AV mode and the video of AV device will show on projector screen 5. Press the button to turn off unit power. CABLE NOT INCLUDE VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DC IN KEYSTONE VIDEO PLAYER 11 Connect VGA Show The Image On Projector Screen Follow below picture to connect VGA cable and device. 1. Turn off the unit before connect VGA cable. 2. Press the 3. 4. buon to turn on unit and power indicator will light GREEN
/ SOURCE buon to select VGA mode and the video of VGA device will button to turn off power of your projector before connection. Aer connect, press the Press the show on projector screen. 5. Press the button to turn off unit power. VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DC IN KEYSTONE To VGA PORT COMPUTER CABLE OR COMPUTER CABLE NOTE BOOK DECK TOP Please refer to the following table to adjust the output signal from computer Type Resolution VGA 640x480 PC SVGA 800x600 XGA 1024x768 Frequency 31.5 34.7 37.9 37.5 31.4 35.1 37.9 46.6 48.1 46.9 40.3 48.4 56.5 Field Frequency 60 70 72 75 50 56 60 70 72 75 50 60 70 NOTE: In order to get the sound from the unit, please connect AV in cable when you connect VGA input. 12 Connect Audio Output ( Aux Out / Line Out ) Follow below picture to connect audio cable and device. 1. Press the 2. Use audio cable to connect follow below figure. 3. After connect and turn on both units. Your projector sound from external device button to turn off power of your projector before connection. now. 4. After using , turn off both unit AV CABLE VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DC IN KEYSTONE Important Note:
If there is no sound from the stereo audio output when playing media contents from a set top box, BD/DVD or streaming players connecting to the HDMI input, please check the set top box or the player's digital audio settings and make sure it is set to "PCM Stereo" mode. Install USB Device Follow below picture to install USB Turn the unit off before install USB. VIDEO USB 1 HDMI 1 USB 2 HDMI 2 VGA DC IN KEYSTONE 13 to enter. Using USB Playback (Media Player) Install USB device:
1. Turn off the unit before install USB. 2. Install the USB device into USB port. 3. After connect, press the button to turn on unit and the power indicator light GREEN. 4. Press the / SOURCE button to select USB Media Player and press button 5. Use buttons to select PHOTO/MUSIC /MOVIE/TEXT icon and press button 6. Use the button to select Remove disk(USB) and press button to enter. 7. Use buttons to search the correct file and press the button to preview playback file and press the button to return to previous or button of remote to start playback. 8. Press button to fast search forward and rewind. 9. Press button to search next or previous file. 10. During playback, press the button to pause and press again to resume. NOTE: Remove USB device, press the button to turn off power FIRST. to enter. OK OK OK OK Sub-Menu on Photo screen Figure 1. Pause Prev. Next Stop Repeat PList Info Rotate Rotate ZoomI ZoomO Move Slide Sub-Menu on Music screen Figure 2 1. When photo playback, press the button and more function OK screen show on lower (figure 1). 2. Use the button to select icon and press the button to OK play special function. OK button and more function screen show on lower (figure 2 ). 1. When music playback, press the 2. Use the button to select OK icon and press the button to play special function. Pause FB FF Prev. Next Stop Set A MUTE PList Info GoTime Sub-Menu on Movie screen 1. When movie playback, press the OK button and more function screen show on lower (figure 3). 2. Use the button to select OK icon and press the button to play special function. Figure 3 Pause FB FF Prev. Next Stop Repeat Set A PList Info SlowF StepF GoTime ZoomI ZoomO Aspect Move Sub-Menu on Text screen Figure 4 1. When text playback, press the OK button and more function screen show on lower (figure 4). 2. Use the button to select OK icon and press the button to play special function. Pre... Nex... Prev. Next Stop PList Info In rare cases, if the projector's speaker has no sound when playing a USB media file using USB Media Player, please play the video by installing a compatible media player app from an app store in Projector Home screen. 14 Using Projector Menu 1 Press SETUP button to enter projector menu. Press again to previous status. Software Update (... Native information USE TO SELECT Software Update (... USE TO SELECT Native information PRESSOK This System menu showed on right upper of view screen. PRESSOK For service center use only. Use the SETUP button to return. button to show below information and press Native inf Model : RPJ129 RCA SW Ver: 2.0 LOGO: RCA TM058-ET058 IC:MINILVDS MMM DD YYYY HH:MM:SS NOTE: MMM DD YYYY is representative date of software HH:MM:SS is representative time of software 15 Using Projector Menu 2 Press SETUP button to enter projector menu, press select picture menu. buttons to Picture Mode Standard Color Temper... Aspect Noise Reduction MPEG_ Noise ... >
Panel Flip Rotate 1 Projector Zoom USE TO SELECT Picture Mode Standard USE TO SELECT PRESSOK Color Temper... USE TO SELECT PRESSOK Aspect 16:9 USE TO SELECT PRESSOK This Picture menu showed on right upper of view screen. Use to select different picture effect to Standard / Soft /
User / Vidid. Use or to select Contrast / Brightness /
Color / Sharpness digit If chose User item. Follow below figure. Use to select different color temperature to Cool / Medium /
Warm / User. Use or to select Red / Green / Blue digit If chose User item. Follow below figure. Use buttons to select screen ratio AUTO / 4:3 / 16:9. Follow below figure. Noise Reduction USE TO SELECT MPEG Noise TO SELECT USE PRESSOK Use buttons to select Off / Low / Middle / High / Default. PRESSOK Use buttons to select Off / Low / Middle / High / Default. Panel Flip Rotate 1 USE TO SELECT PRESSOK Use to select rotate 0 / rotate 1 / rotate 2 / rotate 3 to set screen angle. Projector Zoom PRESSOK Use to select different zoom scale digit 70% -100%. Picture Mode Customer define Contrast Brightness Color Sharpness Color temperature Customer define Red Green Blue Aspect Ratio 4:3 16:9 Parameter 0-100 0-100 0-100 0-100 Parameter 0-100 0-100 0-100 The signal in a 4:3 aspect ratio projection image The signal in a 16:9 aspect ratio projection image 16 Using Projector Menu 3 Press SETUP button to enter projector menu, press menu. buttons to select sound Sound Mode Standard Balance Surround Sound USE TO SELECT Sound Mode Standard USE TO SELECT PRESSOK sound menu showed on right upper of view screen. This Use to select different sound effect Standard / Music /
Movie / Sports / User. Use or to select Treble and Bass digit If chose User item. Follow below figure to set digit. Balance 0 USE TO SELECT PRESSOK Use to select Balance level to -50 to +50. Surround Sound Off PRESSOK Use to select different sound effect to Off /
SRS TruSurrou / Surround. Sound Mode - User Treble Bass Parameter 0 -100 0 -100 buttons to select OPTION Using Projector Menu 4 Press SETUP button to enter projector menu, press menu. OSD Language English Restore Factory Default Color Range AUTO his OPTION menu showed on right upper of viewing T screen. USE TO SELECT OSD Language English USE TO SELECT PRESSOK Restore Factory Default USE TO SELECT PRESSOK OK Use button to select different language. Follow below figure. OK Use buttons to select Y or N. If choose Y that your unit will go to factory default setting. Color Range AUTO PRESSOK Press OK button to change AUTO/ 0~255 /16~235 English France Magyar Polski Romaneste Suomi Slovakia Dansk Hrvatski Nederl... Portugues Sloven... Svenska Deutsch Italiano Norsk Py cc Srpski Chinese 17 Projector Home Screen 1. Press the button to turn on unit. 2. Press the / SOURCE button and use the button to select Streaming Apps. 3. Press the button to enter Projector Home Screen like the figure. 4. Use button to select application icon and press button for operation. OK OK Note: The projector is loaded with the most updated system files and apps. From time to time, Android system may require update patch in order to run. If you choose to update, a Google account is required. If you do not want to update, please press the Return button on the remote. Connect to Wi-Fi Initial Wi-Fi Connection In Projector Home Screen, use button to select Wi-Fi Network icon and press button to enter menu. OK The unit will search and show all available networks on the screen.
(if no available networks show out, Press button to turn on the Wi-Fi.) OK 1. Use button to select Network and press button to enter. OK 2. Enter password for your selected network Use button to select character, numbers, symbols and so on, Press button to confirm in the virtual keyboard.
>
3. Press button to exit virtual keyboard enter state 4. Use button to select CONNECT to connect Wi-Fi network. NOTE: For easy operation or key in the password, you can connect an Android keyboard
(not included) or a mouse (not included) in the USB ports in the rear of the unit. 18 The Menu Sengs In Projector Home Screen, use button to select Settings icon and press button to enter Settings menu. OK Settings Device Network Apps Storage & reset Preferences Date & time Language Presonas Security & restrictions Account Add accout This Settings menu showed on right upper of view screen. In Settings menu, the following items provide you to setup for your favorite. l Network for setup wireless network l Apps will list out the Apps which is installed. l Storage & rest show internal shared storage status and Factory data reset. l Date & time with the following menu for setup. Set time zone Use button to set the time zone, press button to confirm. Use 24 hour format Press button to set On or Off l Languages Use button to set the language, press button to confirm. l Security & restrictions with the following menu for setup Unknown sources Press button to set On or Off Verify apps - Press button to set On or Off l Add account Let you add account for the Apps like Facebook, Google, Skype, Twitter, etc. OK OK OK OK OK 19 Install and Uninstall Apps Before starting, please make sure the projector is connected to a Wi-Fi network. l Install Apps 1. 2. 3. In Projector Home Screen, start the app store by selecting one of the following app stores and search for the app you want to install:
-Aptoide TV
-APKMirror
-APKPure
-Streaming App Store Download an APK file of the app, save it to the projector's internal storage, and then install the app by selecting APPInstaller icon in Projector Home Screen. You may also download an APK file of the app on a computer, save the file to a USB drive, plug the USB drive into the projector's USB port and use APPInstaller to select the file on the USB drive to install the app. After starting app installation, follow the on screen message to complete the installa-
tion. You may need to change the setting in Security > "Unknown" when prompted. l Delete installed Apps OK In Projector Home Screen, use button to select Settings icon and press button to enter Settings menu. 1. Use button to select Apps and press button to enter. 2. All application Apps will show which is installed on the unit. 3. You can choose which programs to be disable or uninstall. OK Video Streaming (playing online TV and movies) To play any online video, please install a video streaming app such as Youtube or Crackle by starting the app store e.g. Aptoide TV, and enter the name of the app in "Search" section. Please note that not all apps listed in the app store operate in the projector after installation. Important Note:
If there is no sound from the internal speakers when playing streaming media contents from APP like Youtube, Netflix, Vudu etc. Please check the audio settings and make sure it is set to "PCM Stereo" mode. Browser Funcon 1. In Projector Home screen, select relative Browser icon (e.g. Chrome) to enter browser website. 2. Key in the website address or something what you want to search. Use button or button to move the cursor in the virtual keyboard to select character, numbers, symbols and so on, press button to confirm in the virtual keyboard. NOTES:
l You can switch the numeric input keyboard, move the cursor to
?123 Virtual key and press the OK button, you can switch the digital and symbol enter state. l For easy operation, you can connect an Android keyboard (not included) or mouse
(not included) in USB port in the rear of the unit. l Before use this function, the Wireless network (Wi-Fi) is need connected. 20 Mul-screen Interacve Connecon for Phone and Projector l Miracast First, ensure the projector and the mobile is connected to the same wireless network. Select Miracast icon in Projector Home Screen and tap the mobiles settings, find the screen sharing or wireless display (different mobile models with different names). You can find the name of the projector Android_xxxx in the mobile screen sharing, click the link, then click the projector to accept this connection. The mobile device will be transferred to full-screen projector (this feature is only supported by Android system 4.2 or above. IOS devices do not support Miracast). Note: Please note that depending on the mobile device, Miracast may not operate as indicated due to copyright restrictions. 21 Specifications Light Source Type LED Lumen (LED) 3100 (Color Brightness), 2000 (White Brightness) Display Native Resolution 1280 x 800 HDMI Input Supported Video Resolution. 1080p , 1080i , 720p, 576i , 480p, and 480i Included Adapter Input AC100-240V,50/60Hz Output DC 36V, 2A Display Color 16.7M Projection Size (Optimal) 60-160 inch Contrast Aspect Ratio Input Ports USB Port WiFi 600:1 16:9 / 4:3 AV / VGA / HDMI Support USB device up to 32GB Support Picture format: JPG, BMP, PNG Support Audio format: MP3, WMA Support Video format: MPEG1, MPEG2, MPEG4, RM, AVI 2.4GHz 802.11b/g/n Audio Power output 2W (RMS) x2 USB Net Weight Product dimensions DC5V 100mA 2.32 KG 310 mm x 234 mm x 128mm Specifications are typical, individual units might vary. They are subject to continuous improvement without notice and without incurring any obligation. 22
This product uses the FCC Data API but is not endorsed or certified by the FCC