MM5 Powered Multimedia Speakers with Bluetooth User manual

MM-5&MM-5R Powered Multimedia Speakers with Bluetooth P/N 38619/38620 Users Manual FEATURES 5.25" paper cone woofer 1.5" silk dome tweeter(38619);2.6 AMT tweeter(38620) 42Hz~20KHz frequency response(38619);42Hz~22KHz frequency response(38620) Dual class AB amplifiers with 2x 60 watts to the woofers and 2x 30 watts to the tweeters Bluetooth version 5.0 radio with the Qualcomm aptXTMHD audio codec Subwoofer and 3.5mm headphone outputs Stereo analog RCA,stereo analog 3.5mm TRS,digital optical(Toslink) ,USB and Bluetooth inputs USB charging port(5V DC 2A) Includes a pair of wooden isolation/elevation stands 1x pair MM-5/MM-5R powered speakers 2x Wooden isolation/elevation stands 1x AC power cord 1x 3.5mm Stereo audio cable 1x Users manual 1x Remote control 1x Speaker Interconnect cable 1x Stereo RCA audio cable 2x Foot mats 2x AAA batteries PRODUCT OVERVIEW Front Panel 1. 1.5" silk dome tweeter(38619);2.6AMT tweeter(38620) 2. 5.25" paper cone woofer 3. 3.5mm headphone output 4. Wooden isolation/elevation stands 5. AUX LED indicator 6. RCA LED indicator 7. Bluetooth LED indicator 8. Optical LED indicator 9. USB LED indicator 10. Volume knob Rear Panel Master Speaker 1. Digital optical input jack 2. USB input jack 3. On/standby On/standby switch 4. 3.5mm TRS input jack 5. Stereo RCA input jack 6. Subwoofer output jack 7. USB charging output jack USB charging port 8. Speaker output connector 9. Power switch 10.AC input jack AC power inlet Slave Speaker 11.Speaker input connector INSTALLATION 1.Ensure that the Power Switch on the rear panel of the Master Speaker is in the OFF position. 2.Plug one end of the included Speaker Connection Cable into the Speaker Input Connector on the rear panel of the Slave Speaker, then plug the other end into the Speaker Output Connector on the rear panel of the Master Speaker. 3.(Optional) Using a 3.5mm stereo audio cable, plug one end into the 3.5mm TRS input Jack on the rear panel of the Master Speaker, then plug the other end into the headphone output on your mobile device or other audio source device. 4.(Optional) Plug one end of a stereo RCA audio cable into the Stereo RCA Input Jacks on the rear panel of the Master Speaker, then plug the other end into the output jacks on your audio source device. 5.(Optional) Plug one end of a digital optical audio cable into the digital optical input jack on the rear panel of the Master Speaker, then plug the other end into the output jacks on your audio source device. 6.(Optional) Plug one end of a USB cable into the USB input jack on the rear panel of the Master Speaker, then plug the other end into the output jacks on your audio source device. 7.Plug one end of the included AC Power Cord into the AC power inlet, then plug the other end into a nearby AC power outlet. the front of the Master Speaker offers push and turning THE MULTI-FUNCTION KNOB The multi-function knob at functions. This knob controls the basic functions :

1. ON/Standby: A short push can power ON the speaker, Stand by can be forced by a longer push (>2s) on the knob.If set Stand by manually, a static weak white LED will confirm this.In case of automatic standby, this will be visible through a slowly blinking white LED. 2. Volume control: If the device is ON, by turning the knob, the volume can be increased or decreased.After switching OFF and ON, the previous volume setting is recovered. 3. Sequencial input selection (short push on the knob when the device is ON):

Line1:AUX Line2:RCA Line3:BT Line4:OPT Line5:USB BLUETOOTH PAIRING Perform the following steps to pair your mobile device with the speakers. 1. Flip the Power Switch on the rear panel of the Master Speaker to the ON position. The LED Indicator on the front panel will illuminate. 2. Select BT by short pushing the volume knob

(SOURCE on IR remote) until reaching the BT position

(this will be visible through a slowly blinking white LED). 3. Open the Bluetooth settings on your mobile device, then scan for nearby Bluetooth devices. 4. Locate and select the MM5/MM5R entry. If prompted for a passcode, enter 0000

(four zeroes). The LED Bluetooth Indicator will cease flashing, indicating that the Bluetooth connection has been successfully made. Note that once paired with your mobile device, the speakers wilt remember the pairing. To reconnect after the connection has been broken, open the Bluetooth settings on your mobile device and select Connect to reestablish the connection. Speaker System Bluetooth cone woofer dome tweeter(38619);2.6 AMT tweeter(38620)

(38619);42Hz~22KHz(38620) 42Hz~20KHz Active 5.25"

1.5"

Response:

Amplifier AMP:

2x 2x AMP:

Standard:

Stereo SPECIFICATION 2.0 1.Description:

paper Driver:

2.LF 3.HF Driver:

silk 4.Frequency AB 5.Class 6.LF Power 7.HF Power 8.Bluetooth 10.Inputs:

optical(Toslink) 11.Output:

12.USB wooden 13.A pair 14.Measurements:

charging of analog and

,USB watts watts 60 30 V5.0 with the RCA,stereo Bluetooth Headphone,Subwoofer 2A) port(5V DC isolation/elevation W185xH276.5xD240mm stands Qualcomm analog aptXTMHD audio TRS,digital 3.5mm codec OPERATION Note that the output of the speakers is the sum of all inputs. Unless you specifically want to listen to a mix of different sources, only one audio input should be in active use at a time. 1. Rotate the Volume Knob on the Master Speaker fully counterclockwise. 2. Press the Power Switch on the Master Speaker to the ON position. The LED Indicator on the front panel will illuminate. 3. Start audio playback on your audio source device. 4. Slowly rotate the Volume Knob clockwise until the volume is at a comfortable listening level.