| submitted | available | document details (if available) | source link |
|---|---|---|---|
| April 10 2019 | April 10 2019 | BC300D User Guide Motorola Solutions, Inc. Adobe Acrobat Pro DC 19.12.20035 |
| various | Manual | Users Manual | 2.15 MiB | April 10 2019 |
PROFESSIONAL DIGITAL TWO-WAY RADIO USER GUIDE BC300D User Guide SEPTEMBER 2019 2019 Motorola Solutions, Inc. All rights reserved MN006027A01-AA English Contents Chapter 1: Read Me First............................................... 4 What Your Dealer/System Administrator Can Tell You............................................................... 4 Chapter 2: Radio Overview............................................ 5 Programmable Buttons........................................6 Assignable Radio Functions..................... 6 LED Indications................................................... 7 Chapter 3: Getting Started............................................. 8 Charging the Battery............................................8 Attaching and Removing the Battery................... 9 Attaching the Battery................................ 9 Removing the Battery............................... 9 Attaching and Removing the Antenna............... 10 Attaching the Antenna............................ 10 Removing the Antenna........................... 11 Attaching and Removing the Belt Clip............... 11 Attaching the Belt Clip............................ 11 Removing the Belt Clip........................... 12 Attaching the Universal Connector Cover......... 13 2 Removing the Universal Connector Cover........ 13 Turning the Radio On........................................ 14 Turning the Radio Off........................................ 14 Adjusting the Volume.........................................15 Chapter 4: Time-Out Timer.......................................... 16 Chapter 5: Selecting Channels.....................................17 Chapter 6: Calls............................................................18 Group Calls........................................................18 Making Group Calls................................ 18 Responding to Group Calls.....................18 Private Calls ..................................................... 19 Making Private Calls............................... 19 Responding to Private Calls................... 19 All Calls..............................................................19 Making All Calls...................................... 20 Chapter 7: Call Alert Operation.................................... 21 Making Call Alerts..............................................21 Responding to Call Alerts.................................. 21 Chapter 8: Talkaround..................................................22 Toggling Between Repeater and Talkaround Modes................................................................22 Chapter 9: Monitor Feature ......................................... 23 Monitoring Channels..........................................23 Chapter 10: Scan......................................................... 24 Turning Scan On or Off .................................... 24 Responding to Transmissions During Scanning............................................................25 Deleting Nuisance Channels............................. 25 Chapter 11: Enabling Transmission from Another Radio............................................................................ 26 Chapter 12: Disabling Transmission from Another Radio............................................................................ 27 Chapter 13: Authorized Accessories List..................... 28 Legal and Compliance Statement................................ 30 Copyrights......................................................... 30 Computer Software Copyrights......................... 31 Supplier's Declaration of Conformity................. 31 Important Safety Information............................. 33 Notice to Users (FCC and Industry Canada).....34 English 3 English Read Me First This user guide covers the basic operation of the two-way radio. Your dealer or system administrator can customize your radio for your specific needs. Check with your dealer or system administrator for more information. What Your Dealer/System Administrator Can Tell You You can consult your dealer or system administrator about the following:
What are the functions of each button?
Which optional accessories may suit your needs?
What are the best radio usage practices for effective communication?
What maintenance procedures promote longer radio life?
4 Radio Overview No. 1 2 3 4 5 6 7 8 9 10 11 Description Antenna Channel Selector Knob On/Off/Volume Control Knob LED Indicator Push-to-Talk (PTT) Button Programmable Side Button 1 Programmable Side Button 2 Microphone Speaker Programming Port Accessory Connector English 5 95346810111127 English Programmable Buttons You can program the programmable buttons as shortcuts to radio functions or preset channels or groups. Depending on the duration of a button press, the programmable buttons function differently. Table 1: Button Press Duration Description Action Press and release for less than 1 Short press second. Press and hold for 4 seconds or less depending on the settings through the Customer Programming Software (CPS). Long press Assignable Radio Functions You can assign a list of radio functions to the programmable buttons. 6 Table 2: Assignable Radio Functions Function All Alert Tones On/Off Battery Indicator Description Allows you to toggle all tones and alerts on or off. Allows you to indicate battery strength by using the LED Indica-
tor. Allows you to toggle transmit power level between high and low. Allows you to monitor a channel. Allows you to temporarily remove an unwanted channel, except for the Selected Channel, from the scan list. The Selected Channel refers to the selected zone or channel combination of you from which scan is initiated. Allows you to directly initiate a predefined Private, Group Call, Call Alert, or Home Revert. High/Low Power Monitor Nuisance Delete One Touch Ac-
cess Function Repeater/Talk-
around Scan On/Off Tight/Normal Squelch Description Allows you to toggle between us-
ing a repeater and communicat-
ing directly with another radio. Allows you to toggle scan on or off. Allows you to toggle squelch level between tight and normal. Indication Solid Yel-
low Solid Green Blinking Green Status The radio is scanning for activity. The radio is receiving transmission. The radio is scanning for activity. English LED Indications The LED Indicator shows the operational status of your radio. A qualified technician can permanently disable the LED indication by preprogramming it. Table 3: LED Indications Indication Solid Red Status The radio is charging or transmitting. Blinking Red The battery capacity is low. 7 English Getting Started This chapter provides instructions to prepare your radio for use. Charging the Battery Your radio is powered by a Lithium-Ion (Li-Ion) battery. Turn off your radio when charging. To comply with warranty terms and avoid damages, charge the battery using an authorized charger. Charge a new battery 14 to 16 hours before initial use for best performance. Batteries charge best at room temperature. 8 Attaching and Removing the Battery Attaching the Battery 1 Align the battery with the rails on the back of the radio. 2 Press the battery firmly, and slide it upwards until the latch snaps into place. English Removing the Battery 1 Turn off your radio. 2 Move the battery latch into unlock position and hold. 3 Slide the battery down and lift it off the rails. 9 English Attaching and Removing the Antenna Attaching the Antenna 1 Set the antenna in the receptacle. 2 Turn the antenna clockwise. 10 NOTICE:
Fastening the antenna blocks water and dust from entering the radio. Removing the Antenna 1 Turn the antenna counterclockwise. Attaching and Removing the Belt Clip 2 Remove the antenna from the receptacle. Attaching the Belt Clip Align the grooves on the clip with the grooves on the battery and press it downwards until it clicks. English 11 English 2 Slide the clip upwards and away from the radio. Removing the Belt Clip 1 To remove the clip, press the belt clip tab away from the battery. 12 English Attaching the Universal Connector Cover The universal connector is located beside the antenna. You can connect authorized accessories to the radio through the universal connector. Replace the universal connector cover or dust cover when the universal connector is not in use. 1 Insert the slanted end of the cover into the slots above the universal connector. 2 Secure the connector cover to the radio by pressing the cover inwards. Removing the Universal Connector Cover Remove the universal connector cover or dust cover by pulling the cover out. 13 English Turning the Radio On Rotate the On/Off/Volume Control knob clockwise until it clicks. If successful, your radio shows the following indications:
A tone sounds. NOTICE:
If the Tones/Alerts function is disabled, there is no tone upon powering up. The orange LED blinks, followed by the green LED. If your radio does not power up, check your battery. Make sure that the battery is charged and properly attached. Contact your dealer if your radio still does not power up. Turning the Radio Off Replace the dust cover when the universal connector is not in use. Rotate the On/Off/Volume Control knob counterclockwise until it clicks. 14 Adjusting the Volume To adjust the volume of your radio, perform one of the following actions:
To increase the volume, turn the On/Off/Volume Control knob clockwise. To decrease the volume, turn the On/Off/Volume Control knob counterclockwise. NOTICE:
Your radio can be programmed to have a minimum volume offset where the volume level cannot be lowered past the programmed minimum volume. Check with your dealer or system administrator for more information. English 15 English Time-Out Timer Time-Out Timer sets a fixed duration for a transmission. Your system administrator can set the time-out time for a channel through the radio software. Before your radio reaches the time-out time, a ten-second warning beep sounds. When your radio reaches the time-out time, your radio stops transmitting and shows the following indications:
A tone sounds. The red LED extinguishes. To resume transmission, you must release the PTT button and wait for the Penalty Timer to expire. 16 Selecting Channels Your radio supports up to 16 channels. Each channel can be programmed with different features that support different groups of users. Select channels by toggling the Channel Selector knob. Your radio indicates the channel number through voice announcement. If the channel is not programmed, an error tone sounds. English 17 English Calls Depending on the type of call, you can make, receive, and respond to calls in both Conventional Analog and Digital mode. Group Calls Group Calls are calls from an individual radio to a group of radios. To communicate in a group, your radio must first be configured as a part of the talkgroup. Making Group Calls 1 To select a channel with an active group ID, perform one of the following actions:
Toggle the Channel Selector knob. Press the programmed One Touch Access button. 2 To call, press the PTT button. 3 Wait for the Talk Permit Tone to end, and speak into the microphone. 18 4 To listen, release the PTT button. If your radio does not detect voice activity for a predetermined period, the call ends. Responding to Group Calls When you receive Group Calls, your radio shows the following indications:
The green LED illuminates. Your radio unmutes and the incoming call sounds through the speaker. 1 To respond, press the PTT button. 2 Wait for the Talk Permit Tone to end, and speak into the microphone. 3 To listen, release the PTT button. Private Calls Private Calls are calls from an individual radio to another individual radio. Making Private Calls 1 To select a channel with an active subscriber ID, perform one of the following actions:
Toggle the Channel Selector knob. Press the programmed One Touch Access button. 2 To call, press the PTT button. 3 Wait for the Talk Permit Tone to end, and speak into the microphone. 4 To listen, release the PTT button. If your radio does not detect voice activity for a predetermined period, the call ends. English Responding to Private Calls When you receive Private Calls, your radio shows the following indications:
The green LED illuminates. Your radio unmutes and the incoming call sounds through the speaker. 1 To respond, press the PTT button. 2 Wait for the Talk Permit Tone to end, and speak into the microphone. 3 To listen, release the PTT button. If your radio does not detect voice activity for a predetermined period, the call ends. All Calls All Calls are one-way calls from an individual radio to all radios on a channel. All Calls are used for making 19 English important announcements.The recipients on the channel cannot respond to All Calls. When you receive All Calls, your radio shows the following indications:
A tone sounds. The green LED illuminates. Your radio unmutes and the incoming call sounds through the speaker. All Calls do not wait for a predetermined period before ending. You can only continue with programmed button functions after the All Call ends. If you switch to a different channel during an All Call, your radio stops receiving the call. Making All Calls 1 To select a channel with an active group ID, toggle the Channel Selector knob. 2 To call, press the PTT button. 3 Wait for the Talk Permit Tone to end, and speak into the microphone. 20 Call Alert Operation Call Alert paging enables you to alert a specific radio user to call you back. Making Call Alerts Press the programmed One Touch Access button. If the call alert acknowledgment is received, a positive tone sounds. If the call alert acknowledgment is not received, a negative tone sounds. Responding to Call Alerts When you receive a Call Alert, your radio shows the following indications:
A repetitive tone sounds. The yellow LED blinks. To respond, press the PTT button within four seconds. English 21 English Talkaround This feature allows you to continue communicating when your repeater is non-operational, or when your radio is out of range from the repeater but within the talk range of other radios. The talkaround setting is retained even after powering down. Toggling Between Repeater and Talkaround Modes Press the programmed Repeater/Talkaround button. If a positive tone sounds, your radio is in talkaround mode. If a negative tone sounds, your radio is in repeater mode. 22 Monitor Feature The feature allows you to make sure that a channel is free before transmitting. Monitoring Channels Press the programmed Monitor button and hold the button to continue monitoring the channel. If the channel is in use, your radio shows the following indications:
You hear radio activity. The yellow LED illuminates. If the monitored channel is free, your radio shows the following indications:
You hear white noise". The yellow LED illuminates. To stop monitoring the channel, release the programmed Monitor button. English 23 English Scan Your radio cycles through the programmed scan list for the current channel looking for voice activity when you start a scan. Your radio also performs dual-mode scan. If you are on a digital channel, and your radio locks onto an analog channel, your radio automatically switches from digital mode to analog mode during the call. If you are on an analog channel, and your radio locks onto a digital channel, your radio automatically switches from analog mode to digital mode during the call. Table 4: Scan types Type Main Channel Scan (Man-
ual) 24 Description Your radio scans all the channels or groups in your scan list. On entering scan, your radio may, de-
pending on the settings, automatically start on the last scanned active chan-
nel or group, or on the Type Auto Scan (Automatic) Description channel where scan was initiated. Your radio automatically starts scanning when you select a channel or group that has Auto Scan ena-
bled. Turning Scan On or Off Press the programmed Scan button. If Scan is enabled, your radio shows the following indications:
A positive tone sounds. The yellow LED blinks. If Scan is disabled, your radio shows the following indications:
A negative tone sounds. The yellow LED extinguishes. Responding to Transmissions During Scanning During scanning, your radio stops on a channel or group where activity is detected. The radio stays on that channel for a programmed duration known as hang time. 1 Press the PTT button. 2 Wait for the Talk Permit Tone to end, and speak into the microphone. 3 To listen, release the PTT button. Deleting Nuisance Channels If a channel continually generates unwanted calls or noise
(termed a "nuisance" channel), you can temporarily remove the unwanted channel from the scan list. This capability does not apply to the channel designated as the Selected Channel. 1 Press the programmed Nuisance Channel Delete button until you hear a tone. English 2 Release the programmed Nuisance Channel Delete button. 25 English Enabling Transmission from Another Radio 1 Select the channel with the subscriber ID that you want to enable transmission from. 2 Short press Side Button 1. Your radio shows the following indications:
A tone sounds. The red LED blinks once. The receiving radio shows the following indications:
A tone sounds. The LED extinguishes. 26 Disabling Transmission from Another Radio 1 Select the channel with the subscriber ID that you want to disable transmission from. 2 Short press Side Button 2. Your radio shows the following indications:
A tone sounds. The red LED blinks once. The receving radio shows the following indications:
The Talk Prohibit Tone sounds. The LED flickers. English 27 English Authorized Accessories List Table 8: Carry Device Part Number RLN5644_ Description Belt Clip for 2 in. Belt Width Table 9: Charger Part Number PMPN4171_ PMPN4140_ Description Mag One Single-Unit Charger Desktop Single-Unit Base Charger Table 10: Earbuds and Earpieces Part Number PMLN6534_ Description Mag One Earbud with In-Line Mi-
crophone/PTT/VOX Switch Mag One Ear Receiver with In-Line Microphone/PTT/VOX Switch Description Mag One, UHF, 450470 MHz, Stubby Antenna Mag One, UHF, 403470 MHz, Wi-
deband Antenna Description Mag One Li-Ion, 1700 mAh Battery Description Programming Cable USB PMLN6531_ Table 5: Antennas Part Number PMAE4020_ PMAE4104_ Table 6: Battery Part Number PMNN4075_ Table 7: Cable Part Number PMDN4077_ 28 Table 11: Headset and Headset Accessory Part Number PMLN6542_ Description Mag One Ultra-Lightweight Headset with Boom Microphone and In-Line PTT Switch Table 12: Remote Speaker Microphone Part Number PMMN4092_ Description Mag One Remote Speaker Micro-
phone English 29 English Legal and Compliance Statement Copyrights The Motorola Solutions products described in this document may include copyrighted Motorola Solutions computer programs. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola Solutions. 2019 Motorola Solutions, Inc. All Rights Reserved. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the 30 copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Disclaimer Please note that certain features, facilities, and capabilities described in this document may not be applicable to or licensed for use on a specific system, or may be dependent upon the characteristics of a specific subscriber unit or configuration of certain parameters. Please refer to your Motorola Solutions contact for further information. Trademarks MOTOROLA SOLUTIONS, the Stylized M Logo, BEARCOM, and BC300D are registered in the U.S. Patent and Trademark Office. All other products and service names are the property of their respective owners. European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out English trash bin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trash bin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country. Computer Software Copyrights The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. The AMBE+2 voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. U.S. Pat. Nos. #5,870,405, #5,826,222, #5,754,974,
#5,701,390, #5,715,365, #5,649,050, #5,630,011,
#5,581,656, #5,517,511, #5,491,772, #5,247,579,
#5,226,084 and #5,195,166. Supplier's Declaration of Conformity Supplier's Declaration of Conformity 31 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired op-
eration. English Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A. Phone Number: 1-800-927-2744 Hereby declares that the product:
Model Name: BC300D conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
32 NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasona-
ble protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. English Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected. Consult the dealer or an experienced radio or TV technician for help. Important Safety Information RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios CAUTION:
This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. Any modification to this device, not expressly authorized by Motorola Solutions, may void the user's authority to operate this device. 33 This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. English Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with Motorola Solutions-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Notice to Users (FCC and Industry Canada) This device complies with Part 15 of the FCC rules and Industry Canada's license-exempt RSS's per the following conditions:
This device may not cause harmful interference. 34 Franais (Canada) Partie 15, sous-partie B, section 15.107(a), 15.107(d) et section 15.109(a) des rglements de la FCC Appareil numrique de Classe B En tant que priphrique dordinateur personnel, cet appareil est conforme aux stipulations de la partie 15 des rglements de la FCC. Cet appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Son utilisation est assujettie aux deux conditions suivantes :
1 Cet appareil ne doit pas causer dinterfrence nuisible; et 2 Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Dclaration de conformit du fournisseur Dclaration de conformit du fournisseur Rglement CFR 47 partie 2 section 2.1077(a) de la FCC Partie responsable Nom : Motorola Solutions, Inc. Adresse : 1303 East Algonquin Road, Schaumburg, IL 60196-1078, .-U. Numro de tlphone : 1 800 927-2744 Dclare par les prsentes que le produit :
Nom du modle : BC300D est conforme aux rglementations suivantes :
35 Augmenter la distance entre lquipement et le rcepteur. Brancher lappareil dans une autre prise sur un circuit diffrent de celui du rcepteur. Consulter un revendeur ou un technicien de radio ou de tlvision chevronn pour obtenir de laide. Franais (Canada) AVIS:
Cet quipement a fait lobjet de tests et a t dclar conforme aux limites tablies pour un appareil numrique de classe B, conformment la section 15 des rglements de la FCC. Ces limites sont fixes afin doffrir une protection suffisante contre des interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence et, sil nest pas install ou utilis conformment aux instructions, il peut provoquer un brouillage nuisible aux communications radio. Cependant, il est impossible de garantir quil ny aura aucune interfrence dans une installation particulire. Si cet appareil cause une interfrence nuisible la rception de la radio ou de la tlvision, ce qui peut tre dtermin en teignant et en allumant lappareil, vous tes encourag remdier la situation en prenant une ou plusieurs des mesures suivantes :
Rorienter ou dplacer lantenne rceptrice. 36 Selon la rglementation dIndustrie Canada, cet metteur radio ne peut tre utilis quavec une antenne dont le type et le gain maximal (ou minimal) sont approuvs par Industrie Canada pour cet metteur. Afin de limiter les interfrences radio pour les autres utilisateurs, le type et le gain de lantenne doivent tre choisis de faon ce que la puissance isotrope rayonne quivalente (P.I.R.E.) ne soit pas plus forte quil ne le faut pour tablir la communication. Cet metteur radio a t approuv par Industrie Canada pour utilisation avec une antenne approuve par Motorola Solutions offrant le gain maximal autoris et limpdance requise pour le type dantenne indiqu. Il est strictement interdit dutiliser avec cet appareil tout type dantenne ne figurant pas dans cette liste et prsentant un gain suprieur au maximum indiqu pour le type. Franais (Canada) Consignes de scurit importantes Radios bidirectionnelles portatives :
exposition aux radiofrquences et scurit du produit ATTENTION!
Cette radio ne doit tre utilise qu des fins professionnelles. Avant dutiliser la radio, lisez le guide Radios bidirectionnelles portatives : exposition aux radiofrquences et scurit du produit, qui contient dimportantes instructions de fonctionnement pour une utilisation scuritaire et des informations sur lexposition aux frquences radiolectriques, dans le but dassurer votre conformit aux normes et rglements en vigueur. Visitez le site Web suivant pour obtenir la liste des antennes, des batteries et des autres accessoires approuvs par Motorola Solutions :
http://www.motorolasolutions.com Toute modification effectue cet appareil sans lautorisation explicite de Motorola Solutions peut annuler lautorisation dutiliser cet appareil. 37 Avis aux utilisateurs (FCC et Industrie Canada) Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence et la partie 15 des rglements de la FCC :
Cet appareil ne doit pas causer dinterfrence nuisible. Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Toute modification effectue cet appareil sans lautorisation explicite de Motorola Solutions peut annuler lautorisation dutiliser cet appareil. Franais (Canada) 38
This product uses the FCC Data API but is not endorsed or certified by the FCC