| submitted | available | document details (if available) | source link |
|---|---|---|---|
| August 11 2022 | August 14 2022 | MM04133 Microsoft® Word for Microsoft 365 |
| various | User Manual | Users Manual | 2.03 MiB | August 11 2022 / August 14 2022 |
Preliminary Specification Number :SP-ZZ1PJ-331-K W-LAN + Bluetooth Module Data Sheet Qualcomm Chipset for 802.11a/b/g/n/ac + Bluetooth 5.0 (Dual) Sample Part Number: LBEE5ZZ1PJ-TEMP MP Part Number: 1PJ Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 1 / 44 The revision history of the product specification Revision Code
Revised Page
Revised Item Revised Date May 4, 2018 May 17 2018 May 28, 2018 July 6, 2018 July 23, 2018 Aug 3, 2018 Sep 3, 2018 Sep 12, 2018 Oct 8, 2018 Nov 7, 2019 Nov 8, 2019 Jun 5, 2019 A B C D E F G H I J K 3 Updated Scope and Key feature 13~19 Added the WLAN TX power range 3 3 4 8 8 8 10 14~19 20 21 12 13~16 20/23 23 24 31 10 12 16~17 13 28 7 25 4 7 37~44 3 38~44
-Added Manufacturing site
-Added Weight info
-Added Co planarity spec
-Updated Storage Temperature range
-Updated Operating Temperature range
-Updated Specification Temperature range.
-Revise title of section 12 to POWER SEQUENCE Timing
-Revised characterization table
-Updated BT TX Power spec
-Updated BLE TX Power spec
-Added Digital I/O Requirements
-Added INTERFACE TIMING
-Revised the spec of Adjacent Input Level Sensitivity
-Added *10) to DC/RF Characteristics for IEEE802.11ac-5G
-Revised DC/RF Characteristics for Bluetooth
-Added Box and Label info
-Revised spec of ta2
-Revised spec of VOL
-Added UHS SDIO timing requirement
-Revised Digital IO requirement
-Revised Reference circuit
-Revised Marking
-Updated BT Output Power spec
-Added EDR Output Power spec
-Added Radio certification information
-Added the module picture
-Added Appendix
-Updated BT version
-Updated the FCC/IC info by adding a PIFA antenna Change Reason First release Updated Added Added/updated Revised/Added Added Revised Revised Revised Added Updated Updated Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 2 / 44 14.1. 14.2. 14.1.1. 14.1.2. 14.2.1. 14.2.2. 12.1. 12.2. 12.3. TABLE OF CONTENTS 1. SCOPE ..................................................................................................................................................... 3 2. KEY FEATURE ...................................................................................................................................... 3 3. Manufacturing site ................................................................................................................................. 3 4. Part Number ........................................................................................................................................... 3 5. RoHS Compliance ................................................................................................................................... 3 6. Block Diagram ........................................................................................................................................ 3 7. Certification Information ....................................................................................................................... 4 7.1. Radio Certification ................................................................................................................... 4 8. DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS ................................................. 4 8.1. Dimensions ............................................................................................................................... 4 8.2. Pin Layout and PIN Descriptions ........................................................................................... 5 8.3. Marking ..................................................................................................................................... 7 9. ABSOLUTE MAXIMUM RATINGS*1)................................................................................................... 8 10. OPERATING CONDITION*2) ............................................................................................................ 8 External lowpower 32.768 kHz clock............................................................................................... 9 11. POWER SEQUENCE Timing .......................................................................................................... 10 12. Case 1: 3.3 V power down after 1.8 V ................................................................................ 10 Case 2: 1.8 V power down after 3.3 V .................................................................................11 Case 3: All power rails supplied with 3.3 V ...................................................................... 12 13. Digital I/O Requirements ................................................................................................................. 12 INTERFACE TIMING ...................................................................................................................... 13 14. Bluetooth UART Timing .................................................................................................... 13 UART transmit Timing ............................................................................................... 13 UART Receiver Timing ............................................................................................... 13 I2S Timing ........................................................................................................................... 13 I2S Transmitter Timing ............................................................................................... 14 I2S Receiver Timing ..................................................................................................... 14 SDIO Timing ....................................................................................................................... 15 SDIO Default Mode Timing ........................................................................................ 15 SDIO High-Speed Mode Timing ................................................................................. 16 SDIO UHS mode Timing ............................................................................................ 16 15. DC / RF Characteristics.................................................................................................................... 18 15.1. DC/RF Characteristics for IEEE802.11b - 2.4GHz .......................................................... 18 15.2. DC/RF Characteristics for IEEE802.11g - 2.4GHz .......................................................... 19 15.3. DC/RF Characteristics for IEEE802.11n 2.4GHz ......................................................... 20 15.4. Removed .............................................................................................................................. 21 15.5. DC/RF Characteristics for IEEE802.11a - 5GHz ............................................................. 22 15.6. DC/RF Characteristics for IEEE802.11n - 5GHz ............................................................. 23 15.7. DC/RF Characteristics for IEEE802.11ac - 5GHz ............................................................ 24 15.8. DC/RF Characteristics for Bluetooth ................................................................................ 25 15.9. DC/RF Characteristics for Bluetooth (LE) ........................................................................ 26 LAND PATTERN (TOP VIEW) ........................................................................................................ 27 16. REFERENCE CIRCUIT ................................................................................................................... 28 17. 18. TAPE AND REEL PACKING ........................................................................................................... 29 19. NOTICE ............................................................................................................................................. 33 19.1. Storage Conditions: ............................................................................................................ 33 19.2. Handling Conditions: ......................................................................................................... 33 19.3. Standard PCB Design (Land Pattern and Dimensions): ................................................. 33 19.4. Notice for Chip Placer: ....................................................................................................... 33 Soldering Conditions: ......................................................................................................... 34 19.5. 19.6. Cleaning: ............................................................................................................................. 34 19.7. Operational Environment Conditions: .............................................................................. 34 Input Power Capacity: ........................................................................................................ 35 19.8. 20. PRECONDITION TO USE OUR PRODUCTS ............................................................................... 36 Please be aware that an important notice concerning availability, standard warranty and use in critical applications of Murata products and disclaimers thereto appears at the end of this specification sheet. 14.3.1. 14.3.2. 14.3.3. 14.3. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 3 / 44 1. SCOPE 2. KEY FEATURE This specification is applied to the IEEE802.11a/b/g/n/ac W-LAN + Bluetooth 5.0 combo module.
- Chipset: QCA9377-3
- Size: 7.2 x 7.4 x 1.25 (max) mm
- Weight: 0.15g/pc
- PCB w/ shielded resin mold module
- IEEE802.11a/b/g/n/ac dual band 2.4G/5G
- Supports BT5.0 (Except Options)
- SDIO 3.0 supporting SDR104 (WLAN), UART/PCM (Bluetooth)
- Lead Free Module 3. Manufacturing site Company name:
Shenzhen Murata Technology Co., Ltd. Address:
15 Cuijing Road, Longtian Street, Shenzhen Grand Industrial Zone, PingShan District, Shenzhen, Guangdong, 518118 China Description In case of sample order 4. Part Number Ordering Part Number LBEE5ZZ1PJ-331TEMP 5. RoHS Compliance This module is compliant with the RoHS directive. 6. Block Diagram Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 4 / 44 7. Certification Information 7.1. Radio Certification USA/Canada FCC ID IC VPYLBEE5ZZ1PJ 772C-LBEE5ZZ1PJ
*Please follow installation manual in Appendix Europe EN300 328 v2.1.1, Draft EN 300 328 v2.2.0, EN301 893 v2.1.1 and Final draft EN300 440 v2.2.1are prepared. 8. DIMENSIONS, MARKING AND TERMINAL CONFIGURATIONS 8.1. Dimensions
<TOP VIEW>
<BOTTOM VIEW>
<SIDE VIEW>
Table 1 Dimension (Unit: mm) Mark L a1 a4 b2 b5 b8 c3 e1 e4 Dimension 7.400.20 0.300.10 0.800.10 0.250.15 0.200.15 1.550.15 0.550.10 0.300.10 0.300.10 Co-planarity: 100um Max. Mark W a2 a5 b3 b6 c1 c4 e2 e5 Dimension 7.200.20 0.300.10 0.300.10 1.450.15 1.050.15 0.550.10 0.800.10 0.300.10 0.300.10 Mark T a3 b1 b4 b7 c2 c5 e3 Dimension 1.25 max 0.300.10 0.200.15 5.150.15 1.350.15 0.550.10 0.300.10 0.300.10
(unit : mm) Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 5 / 44 8.2. Pin Layout and PIN Descriptions Top View PWM_PM VDD11_PM GND SDIO_DATA3 SDIO_DATA2 SDIO_DATA1 SDIO_DATA0 SDIO_CMD SDIO_CLK GND 32KHz_CLK_IN VDDIO_GPIO2 Pin NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Table 2 Terminal Configurations Terminal Name Type VDDIO or pad voltage Connection to IC terminal Description GND Ground Ground VBUCK_GND_PM Ground VBUCK_GND_PM Ground for internal 1.1 V regulator PWM_PM VDD11_PM SWREG PMU 1.1V output. 1.1 V voltage feedback to SWREG PMU. VDDIO_SDIO SDIO_D3 VDDIO_SDIO SDIO_D2 VDDIO_SDIO SDIO_D1 VDDIO_SDIO SDIO_D0 Ground SDIO data bus D3 SDIO data bus D2 SDIO data bus D1 SDIO data bus D0 VDDIO_SDIO SDIO_CMD SDIO CMD line signal OD(1) VDDIO_SDIO SDIO_CLK SDIO clock signal VDDIO_SDIO Power 1.8V or 3.3V VDDIO_SDIO Voltage supply for SDIO SDIO_INTERRUPT_L O VDDIO_SDIO SDIO_INTERRUPT_L SDIO interrupt signal Ground
Ground VDDIO_GPIO2 LF_CLK_IN External lowpower 32.768 kHz clock input Power 1.8V or 3.3V VDDIO_GPIO2 Voltage supply HCI_UART_WAKEHOST OD(1) VDDIO_GPIO2 HCI_UART_WAKEHOST Bluetooth wakeup host. Active high WLAN_RF_KILL_L VDDIO_GPIO2 WLAN_RFKILL_L Turn off WLAN RF analog and frontend.
1.1V 1.1V Ground
O I I/O I/O I/O I/O I I I 2G_WIFI/BT_RF_IN A, I 2G WIFI and BT input 2G_WIFI/BT_RF_OUT A,O Ground Ground Ground A, I/O Ground
GND GND GND ANT GND Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Active low. Ground 2G WIFI and BT output Ground Ground Ground RF Transmit / Receive Antenna
26 3D_FRAME_SYNC VDDIO_GPIO1 3D_FRAME_SYNC Frame sync signal from TV to sync with 3D Preliminary Specification Number : SP-ZZ1PJ-331-K 6 / 44 I I O O I I I I I O O 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 46 47 48 49 62 HCI_UART_RXD HCI_UART_TXD HCI_UART_RTS HCI_UART_CTS PCM_CLK PCM_SYNC PCM_IN PCM_OUT GND VDDIO_XTAL VDDIO_GPIO1 GND WLAN_EN BT_EN VDD_3P3 VDDIO_AO glass via Bluetooth. VDDIO_GPIO1 HCI_UART_RXD UART RXD signal VDDIO_GPIO1 HCI_UART_TXD UART TXD signal VDDIO_GPIO1 HCI_UART_RTS UART RTS signal VDDIO_GPIO1 HCI_UART_CTS UART CTS signal VDDIO_GPIO1 BT_I2S_SCK Bluetooth PCM_CLK signal VDDIO_GPIO1 BT_I2S_WS Bluetooth PCM_SYNC signal VDDIO_GPIO1 BT_I2S_SDI Bluetooth PCM_IN signal VDDIO_GPIO1 BT_I2S_SDO Bluetooth PCM_OUT signal Power 1.8V or 3.3V VDDIO_XTAL Voltage supply for XTAL Power 1.8V or 3.3V VDDIO_GPIO1 Voltage supply Ground Ground VDDIO_AO VDDIO_AO WL_EN BT_EN WLAN enable. Active high Bluetooth enable. Active high Power 3.3V VDD33_PM 3.3 V input voltage Power 1.8V or 3.3V VDDIO_AO_PM Alwayson I/O supply for power I/O OD(1) O Ground
Ground
management and realtime clock. This supply must be present if any other supply is present. Ground LTE_UART_RXD or LTE_FS. LTE_UART_TXD or LTE_PRI. GND Ground
LTE_UART_RXD VDDIO_GPIO1 LTE_UART_RXD LTE coexistence signal. 45 LTE_UART_TXD VDDIO_GPIO1 LTE_UART_TXD LTE co existence signal. CLK_REQ DBG_UART_TXD DBG_UART_RXD QOW OD(1) OD(1) OD(1) VDDIO_GPIO1 CLK_REQ Clock request output VDDIO_AO GPIO[19]
VDDIO_GPIO2 GPIO[18]
DBG_UART_TXD DBG_UART_RXD VDDIO_GPIO2 QOW This signal can be used to enable for external Wireless charging UART circuit. 50~
GND Ground
Ground
(1) OD means this PIN is a digital output signal with open drain, an external pull-up or pull-down resistor is needed when this PIN is used.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 7 / 44 8.3. Marking A B C D Meaning Marking A B C D Pin 1 Marking Module Descriptor Inspection Number Murata Logo Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 8 / 44 min.
-40
-0.3 max. 85 3.65 Unit deg.C V
-0.3 3.6 V 9. ABSOLUTE MAXIMUM RATINGS*1) Storage Temperature Supply Voltage Parameter VDD_3P3 VDDIO_SDIO VDDIO_GPIO1 VDDIO_GPIO2 VDDIO_XTAL VDDIO_AO 10. OPERATING CONDITION*2) Parameter Operating Temperature Specification Temperature range VDD_3P3 VDDIO_SDIO VDDIO_GPIO1 VDDIO_GPIO2 VDDIO_XTAL VDDIO_AO
*1) Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. No damage assuming only one parameter is set at limit at a time with all other parameters are set within operating condition. min.
-20
-20 3.135 typ.
25 3.3 max. 70 60 3.465 unit deg.C deg.C V Supply Voltage 1.71 1.8 or 3.3 3.46 V
*2) Functionality is guaranteed but the specifications require the derating at over-temperatures, over-voltage condition. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 9 / 44 11. External lowpower 32.768 kHz clock The 32 kHz clock is used in low-power modes such as IEEE power-save and sleep. It serves as a timer to determine when to wake up to receive beacons in various power-save schemes and to maintain basic logic operations when in sleep. Type1PJ module does not require an external 32 kHz clock. By default, Type1PJ module utilizes its internal 200 kHz clock shared with the WLAN and BT subsystem. If the end application has a more accurate 32 kHz clock, then it can be supplied externally via the LF_CLK_IN pin. The LF_CLK_IN pin must be grounded when using the default internal clock mode. If an external 32 kHz clock is used, the requirements are:
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 10 / 44 12. POWER SEQUENCE Timing 12.1. Case 1: 3.3 V power down after 1.8 V If the battery source can be removed from the end user device (battery removed, AC/DC plugged in), this is the recommended power sequence. It will avoid violating the power off sequence by allowing the 3.3 V rail to shut down after the 1.8 V rail. Notes:
1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications, VDDIO_GPIO may connected to 3.3 V upon Host VIO voltage. 2. In this case, both WLAN_EN and BT_EN on the 1PJ are at 3.3 V due to using the VDD_AO power rail. If the host VIO voltage is 1.8 V, it must have level shifters to interface with host. 3. All host interface signals must stay floating or low before valid power on sequence (WLAN_EN and BT-EN goes high). Symbol Parameter Min Max Units ta1 ta2 ta3 ta4 ta5 ta6 ta7 ta8 No requirement if VDDIO_AO connected to 3.3 V 90% of 3.3 V to 10% of 1.8 V 90% of VDDIO_GPIO to 0.7 V of both WLAN_EN and BT_EN 10 WLAN_EN valid to LF_CLK_IN input WLAN_EN de-assert (low) to LF_CLK_IN de-assert
(tristate or low) Both WLAN_EN = low and BT_EN = low to 90% of 1.8 V 10 3.3 V always higher than 1.8 V during operation, with power off by removing battery or unplugging AC/DC VDDIO_AO and VDDIO_XTAL should be connected to 3.3 V power rail 0 0 0 0 0 0
s s s s s s s s Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 11 / 44 12.2. Case 2: 1.8 V power down after 3.3 V If the battery source cannot be removed from the end user device, this is the recommended power sequence for this application. This sequence allows the software to control the power on/off sequence. Notes:
1. VDDIO_GPIO voltage should match VIO voltage from the host. In some applications, VDDIO_GPIO may connected to 3.3 V upon host VIO voltage. 2. Both WLAN_EN and BT_EN of 1PJ are 1.8 V. If host VIO voltage is 1.8 V, it does not need level shifter to interface with host. 3. All host interface signals must stay floating or low before WLAN_EN/BT_EN =high, and after WLAN_EN/BT_EN = Low. tb1 tb2 tb3 tb4 tb5 tb6 tb7 tb8 Symbol Parameter Min Max Units No requirement if VDDIO_AO connected to 1.8 V 90% of 1.8 V to 10% of 3.3 V 90% of 3.3 V to 0.7 V of both WLAN_EN and BT_EN 10 WLAN_EN valid to LF_CLK_IN input WLAN_EN de-assert (low) to LF_CLK_IN de-assert
(tristate or low) Both WLAN_EN = low and BT_EN = low to 90% of 3.3 V 10 10% of 3.3 V to 90% of 1.8 V VDDIO_AO and VDDIO_XTAL should be connected to 1.8 V power rail 0 0 0 0 0 0
s s s s s s s s Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 12 / 44 12.3. Case 3: All power rails supplied with 3.3 V All power pins are connected to 3.3 V only include VDDIO_AO, VDDIO_XTAL, VDDIO_GPIOx. Notes:
All host signals are either GND or floating before WLAN_EN/BT_EN =high, and after WLAN_EN/BT_EN = Low. Symbol Parameter Min Max Units tc1 tc4 tc5 tc6 90% of 3.3 V to 0.7 V of both WLAN_EN and BT_EN WLAN_EN valid to LF_CLK_IN input WLAN_EN de-assert (low) to LF_CLK_IN de-assert (tristate or low) Both WLAN_EN = low and BT_EN = low to 90% of 3.3 V 10 0 0 0 s s s s 13. Digital I/O Requirements Symbol VIH Parameter High-level input voltage VIL Low-level input voltage VSHYS Schmitt hysteresis IIL Input low leakage current RPULL Input pull resistor VOH High-level output voltage VOL Low-level output voltage IOH IOL CIN High-level output current Low-level output current Input capacitance Comments Minimum 0.7x VDDIO
-0.3 Type
V Maximum Unit VDDIO +
0.3 0.3x VDDIO
mV V VIN = 0 V Supply = VIO max Up or down
-5
3
0.9x VDDIO 0 1.8 V IO: 375 3.3 V IO: 645
1.8 V IO: 120 3.3 V IO: 70
VDDIO 0.1x VDDIO
-11 3
uA kohm V V mA mA pF
5
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 13 / 44 14. INTERFACE TIMING 14.1. Bluetooth UART Timing 14.1.1. UART transmit Timing tofftxd Parameter tofftxd toffrxd 14.1.2. UART Receiver Timing 14.2. I2S Timing Description Min Typ Max Unit Delay from CTS to TXD stop
8 byte Parameter toffrxd Description Min Typ Max Unit Delay from RTS to RXD stop
8 byte Transmitter Receiver Lower Limit Min Ttr Max
Upper Limit Min
Max
Lower Limit Min Ttr Max
Upper Limit Max Min
Notes a
0.35Ttr 0.35Ttr 0.35Ttr 0.35Ttr 0.35Ttr 0.35Ttr
Clock Period T Master Mode: Clock generated by transmitter or receiver HIGH tHC LOW tLC Slave Mode: Clock accepted by transmitter or receiver HIGH hTC LOW tLC Rise time tRC Transmitter Delay tdtr Hold time thtr Receiver Setup time tsr Hold time thr Notes:
a. The system clock period T must be greater than Ttr and Tr because both the transmitter and receiver have to be
0.15Ttr 0.35Ttr 0.35Ttr
0.2Tr 0 0.8T
c c d
0 e d b b
f f able to handle the data transfer rate. b. At all data rates in master mode, the transmitter or receiver generates a clock signal with a fixed mark/space c. ratio. For this reason, tHC and tLC are specified with respect to T. In slave mode, the transmitter and receiver need a clock signal with minimum HIGH and LOW periods so that they can detect the signal. So long as the minimum periods are greater than 0.35Tr, any clock that meets the requirements can be used. d. Because the delay(tdtr) and the maximum transmitter speed (defined by Ttr) are related, a fast transmitter driven by a slow clock edge can result in tdtr not exceeding tRC which means thtr becomes zero or negative. Therefore, the transmitter has to guarantee that thtr is greater than or equal to zero, so long as the clock rise-time tRC is not more than tRCmax, where tRCmax is not less than 0.15Ttr. e. To allow data to be clocked out on a falling edge, the delay is specified with respect to the rising edge of the clock signal and T, always giving the receiver sufficient setup time. f. The data setup and hold time must not be less than the specified receiver setup and hold time. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 14 / 44 14.2.1. I2S Transmitter Timing 14.2.2. I2S Receiver Timing Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 15 / 44 14.3. SDIO Timing 14.3.1. SDIO Default Mode Timing SDIO Bus Timing parameters (default Mode) Parameter Symbol Min Typ Max Unit SDIO CLK (All values are referred to minimum VIH and maximum VIL Frequency-Data Transfer Mode Frequency-Identification Mode Clock Low Time Clock High Time Clock Rise Time Clock low Time Inputs: CMD, DAT (referenced to CLK) Input Setup Time Input Hold Time Outputs: CMD, DAT (referenced to CLK) Output Delay time-Data Transfer Mode Output Delay time-Identification Mode 0 0a /100 10 10
fPP fOD tWL tWH tTLH tTHL tODLY tODLY tISU tIH 0 0 5 5
25 400
10 10
14 50 MHz kHz ns ns ns ns ns ns ns ns a. 0 Hz means to stop the clock. The given minimum frequency range is for cases where continuous clock is required. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. CLKOutputInputfPPtWHtISUtIHtODLY(min)tWLtTHLtTLHtODLY(max) Preliminary Specification Number : SP-ZZ1PJ-331-K 16 / 44 14.3.2. SDIO High-Speed Mode Timing SDIO Bus Timing parameters (High-Speed Mode) Symbol Min Parameter SDIO CLK (All values are referred to minimum VIH and maximum VIL Frequency-Data Transfer Mode Clock Low Time Clock High Time Clock Rise Time Clock low Time Inputs: CMD, DAT (referenced to CLK) Input Setup Time Input Hold Time Outputs: CMD, DAT (referenced to CLK) Output Delay time-Data Transfer Mode Output Hold time Total System Capacitance (each line) fPP tWL tWH tTLH tTHL tODLY tOH CL
2.5
0 7 7
tISU tIH 6 2 Typ Max Unit
50
3 3
14
40 MHz ns ns ns ns ns ns ns ns pF 14.3.3. SDIO UHS mode Timing In UHS mode the supported features are:
1. Embedded SDIO The chip is only designed for embedded system; that is, it should be mounted on the PCB with host system and not support plug & play. 2. Fixed voltage supply (VDDIO_SDIO 1.8 V) There is no on-chip LDO to do voltage switch when it receives CMD11 (voltage switch command). In other words, the VDDIO_SDIO power supply is provided from host and should keep constant. Note, though, it does not support voltage switch, it does follow the timing flow of CMD11, with the exception of no voltage change, so there is no effect to SW code. The 8-bit mode dedicated to embedded system is supported with the maximum frequency of 50 MHz 3. Support for 8-bit mode a). Clock signal timing Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. CLKInputOutputfPPtWHtISUtIHtOHtWLtTHLtTLHtODLY50% VDD Preliminary Specification Number : SP-ZZ1PJ-331-K 17 / 44 Max
0.2*tCLK 70 Unit ns ns
Remark 208MHz (max.) between rising edge, VCT=0.975V tCR, tCF<0.96ns (max.) at 208MHz, C=10 pF Symbol tCLK tCR, tCF Clock duty Min 4.8
30 b). Input timing Symbol tIS tIH Symbol tIS tIH Min 1.4 0.8 Min 3 0.8 Max
Max
Unit ns ns Unit ns ns c). Output timing (SDR12/SDR25/SDR50) SDR104 mode C =10 pF, VCT=0.975V C=10 pF, VCT=0.975V SDR12, SDR25 and SDR50 modes C =10 pF, VCT=0.975V C=10 pF, VCT=0.975V Symbol Min Max Unit Remark tODLY tTODLY tOH
1.5 7.5 14
d). Output timing (SDR104) ns ns ns TCLK=10ns, CL=30 pF, driver B for SDR50 TCLK=20ns, CL=40 pF, driver B for SDR25,12 Hold time at the tODLY , CL=15 pF Symbol tOP Delta tOP tODW Min 0
-350 0.6 Max 2 1550
Unit ns ps UI Remark Output phase Delay variation due to temperature change after tuning tODW=2.88ns at 208 MHz. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 18 / 44 Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=19 dBm, 11Mbps mode unless otherwise specified. Contents max. unit 15. DC / RF Characteristics 15.1. DC/RF Characteristics for IEEE802.11b - 2.4GHz Specification Mode Frequency Data rate Items
- DC Characteristics -
1. DC current 1) Tx mode (1024byte, 20usec interval)
*4) *5) 2) Rx mode
- Tx Characteristics -
2. Output Power 3. Spectrum Mask margin 1) 1st side lobes(-30dBr) 2) 2nd side lobes(-50dBr) 4. Power-on and Power-down ramp 5. RF Carrier Suppression 6. Modulation Accuracy (EVM) 7.Frequency tolerance 8. Out band Spurious Emissions 1) 30-1000MHz 2) 1000-12750MHz 3) 1800-1900MHz 4) 5150-5300MHz
- Rx Characteristics -
min.
min. 18 0 0
15
-20
min.
-10 IEEE802.11b DSSS / CCK 2412 to 2472 MHz 1, 2, 5.5, 11Mbps typ. 330 60 typ. 19
typ.
max. 20
2.0
35 20
-36
-30
-47
-47 max.
-76
mA mA unit dBm dB dB sec dB
ppm dBm dBm dBm dBm unit dBm dBm dB 9. Minimum Input Level Sensitivity 10. Maximum Input Level (PER < 8%) 11. Adjacent Channel Rejection
(FER < 8%)
*4): Defined when output power setting is 19 dBm at Murata module antenna pad
*5): Data rate is 1Mbps 35
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 19 / 44 15.2. DC/RF Characteristics for IEEE802.11g - 2.4GHz Specification Mode Frequency Data rate IEEE802.11g OFDM 2412 to 2472 MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=18 dBm, 54Mbps mode unless otherwise specified. Contents max. unit Items
- DC Characteristics -
1. DC current 1) Tx mode (1024byte, 20usec interval)
*6) *7) 2) Rx mode
- Tx Characteristics -
2. Output Power 3. Spectrum Mask margin 1) 9MHz to 11MHz (0~ -20dBr) 2) 11MHz to 20MHz (-20~ -28dBr) 3) 20MHz to 30MHz (-28~ -40dBr) 4) 30MHz to 33MHz (-40dBr) 4. Constellation Error (EVM) 5.Frequency tolerance 6. Out band Spurious Emissions 1) 30-1000MHz 2) 1000-12750MHz 3) 1800-1900MHz 4) 5150-5300MHz
- Rx Characteristics -
min.
min. 17 0 0 0 0
-20
min.
-20 typ. 310 60 typ. 18
typ.
max. 19
-25 20
-36
-30
-47
-47 max.
-65
mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dBm dB 7. Minimum Input Level Sensitivity 8. Maximum Input Level (PER < 10%) 9. Adjacent Channel Rejection
(PER < 10%)
*6): Defined when output power setting is 18dBm at Murata module antenna pad
*7): Data rate is 6Mbps
-1
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 20 / 44 15.3. DC/RF Characteristics for IEEE802.11n 2.4GHz Specification Mode Frequency Data rate Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting=18 dBm, BW=20MHz, MCS7 unless otherwise specified. max. unit IEEE802.11n OFDM 2412 to 2472 MHz MCS0-MCS7 typ. 310 60 typ. 18
typ.
max. 19
-27 20
-36
-30
-47
-47 max.
-64 mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dB
- DC Characteristics -
1. DC current 1) Tx mode (1024byte, 20usec interval)
*8)*9) 2) Rx mode
- Tx Characteristics -
2. Output Power 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 2) 11MHz to 20MHz (-20 ~ -28dBr) 3) 20MHz to 30MHz (-28 ~ -45dBr) 4) 30MHz to 33MHz (-45dBr) 4. Constellation Error (EVM) 5.Frequency tolerance 6. Out band Spurious Emissions 1) 30-1000MHz 2) 1000-12750MHz 3) 1800-1900MHz 4) 5150-5300MHz
- Rx Characteristics -
min.
min. 17 0 0 0 0
-20
min.
7. Minimum Input Level Sensitivity 8. Adjacent Channel Rejection
(PER < 10%)
*8): Defined when output power setting is 18 dBm at Murata module antenna pad
*9): Data rate is MCS0
-2
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 21 / 44 15.4. Removed This section is removed. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 22 / 44 15.5. DC/RF Characteristics for IEEE802.11a - 5GHz Specification Mode Frequency Data rate IEEE802.11a OFDM 5180 to 5825MHz 6, 9, 12, 18, 24, 36, 48, 54Mbps Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 14 dBm, 54Mbps unless otherwise specified. typ.
- DC Characteristics -
max. min. 1. DC current 1) Tx mode (1024byte, 20usec interval)
*8)*9) 2) Rx mode
- Tx Characteristics -
2. Output Power 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 2) 11MHz to 20MHz (-20 ~ -28dBr) 3) 20MHz to 30MHz (-28 ~ -45dBr) 4) 30MHz to 33MHz (-45dBr) 4. Constellation Error (EVM) 5.Frequency tolerance 6. Out band Spurious Emissions 1) 30-1000MHz 2) 1000-12750MHz 3) 1800-1900MHz 4) 5150-5300MHz
- Rx Characteristics -
min. 13 0 0 0 0
-20
min.
max. 15
-25 20
-36
-30
-47
-47 max.
-65 420 80 typ. 14
typ.
7. Minimum Input Level Sensitivity 8. Adjacent Channel Rejection
(PER < 10%)
*8): Defined when output power setting is 14 dBm at Murata module antenna pad
*9): Data rate is 6Mbps
-1
unit mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dB Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 23 / 44 15.6. DC/RF Characteristics for IEEE802.11n - 5GHz Specification Mode Frequency Data rate Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 14 dBm, BW=20MHz ,MCS7 unless otherwise specified. max. unit IEEE802.11n OFDM 5180 to 5825MHz MCS0-MCS7 typ. 420 80 typ. 14
typ.
max. 15
-32 20
-36
-30
-47
-47 max.
-64 mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dB
- DC Characteristics -
1. DC current 1) Tx mode (1024byte, 20usec interval)
*8)*9) 2) Rx mode
- Tx Characteristics -
2. Output Power 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 2) 11MHz to 20MHz (-20 ~ -28dBr) 3) 20MHz to 30MHz (-28 ~ -45dBr) 4) 30MHz to 33MHz (-45dBr) 4. Constellation Error (EVM) 5.Frequency tolerance 6. Out band Spurious Emissions 1) 30-1000MHz 2) 1000-12750MHz 3) 1800-1900MHz 4) 5150-5300MHz
- Rx Characteristics -
min.
min. 13 0 0 0 0
-20
min.
7. Minimum Input Level Sensitivity 8. Adjacent Channel Rejection
(PER < 10%)
*8): Defined when output power setting is 14 dBm at Murata module antenna pad
*9): Data rate is MCS0
-2
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 24 / 44 15.7. DC/RF Characteristics for IEEE802.11ac - 5GHz Specification Mode Frequency Data rate Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Output power setting= 1 dBm, BW=80MHz ,MCS9 unless otherwise specified. max. unit IEEE802.11ac OFDM 5210 to 5775MHz MCS0-MCS9 typ. 370 90 typ. 12
typ.
max. 13
-32 20
-36
-30
-47
-47 max.
-51 mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dB
- DC Characteristics -
1. DC current 1) Tx mode (1024byte, 20usec interval)
*8)*9) 2) Rx mode
- Tx Characteristics -
2. Output Power *10) 3. Spectrum Mask 1) 9MHz to 11MHz (0 ~ -20dBr) 2) 11MHz to 20MHz (-20 ~ -28dBr) 3) 20MHz to 30MHz (-28 ~ -45dBr) 4) 30MHz to 33MHz (-45dBr) 4. Constellation Error (EVM) 5.Frequency tolerance 6. Out band Spurious Emissions 1) 30-1000MHz 2) 1000-12750MHz 3) 1800-1900MHz 4) 5150-5300MHz
- Rx Characteristics -
min.
min. 11 0 0 0 0
-20
min.
7. Minimum Input Level Sensitivity 8. Adjacent Channel Rejection
(PER < 10%)
*8): Defined when output power setting is 12dBm at Murata module antenna pad
*9): Data rate is MCS0
*10):Target output power for MCS9 VHT=40 at 5190, 5230, 5270 and 5310MHz is 7dBm.
-9
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 25 / 44 15.8. DC/RF Characteristics for Bluetooth Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Items Bluetooth specification (power class) Channel frequency (spacing) Current Consumption
(a) Tx=DH5
(b) Tx=2DH5
(c) Tx=3DH5
(d) Rx=DH5
(e) Rx=2DH5
(f) Rx=3DH5 Transmitter Output Power@DH5 2402MHz Output Power@DH5 2441MHz Output Power@DH5 2480MHz Frequency range 20dB bandwidth Adjacent Channel Power *1
(a) [M-N] =2
(b) [M-N] 3 Modulation characteristics
(a) Modulation f1avg
(b) Modulation f2max Modulation f2avg / f1avg Carrier Frequency Drift
(a) 1slot
(b) 3slot / 5slot Maximum drift rate EDR Output Power@2DH5 EDR Output Power@3DH5 EDR Relative Power EDR Carrier Frequency Stability and Modulation Accuracy
(a) i
(b) i+o
(c) o
(d) RMS DEVM (DQPSK)
(e) Peak DEVM (DQPSK)
(f) 99% DEVM (DQPSK)
(g) RMS DEVM (8DPSK)
(h) Peak DEVM (8DPSK)
(i) 99% DEVM (8DPSK) Spurious Emissions
(a) 10MHzf<2387MHz
(b) 2387MHzf<2400MHz
(c) 2483.5MHz<f2496.5MHz
(d) 2496.5MHz<f8GHz Receiver BDR Sensitivity (BER<0.1%) EDR Sensitivity (BER<0.007%)@8DPSK C/I Performance (BER<0.1%) *2
(a) co-channel
(b) 1MHz Contents Version 2.1 + EDR (Class1) 2402 to 2480 MHz (1MHz) Max.
Max. 6 6.5 7 2480 1000 Typ. 55 50 50 22 22 22 Typ.
950
Typ.
-20
-40 175
+25
+40 20 7.5 8
+1
+75
+75
+10 20 35 30 13 25 20
-36
-30
-47
-47 Max.
-80
-77 11 0 Min.
Min. 0 0.5 1 2402
140 115 0.8
-25
-40 1 1
-4
-75
-75
-10
Min.
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. unit mA mA mA mA mA mA Unit dBm dBm dBm MHz MHz dBm dBm kHz kHz kHz kHz kHz/50us dBm dBm dB kHz kHz kHz
dBm dBm dBm dBm unit dBm dBm dB dB
(c) 2MHz
(d) 3MHz Maximum Input Level (BER<0.1%) Preliminary Specification Number : SP-ZZ1PJ-331-K 26 / 44 dB dB dBm
-20
-30
-40
*1: Up to three spurious responses within Bluetooth limits are allowed.
*2: Up to five spurious responses within Bluetooth limits are allowed. 15.9. DC/RF Characteristics for Bluetooth (LE) Conditions : 25deg.C, VDD_3P3,VDDIO_SDIO,VDDIO_GPIO1,VDDIO_GPIO2,VDDIO_XTAL,VDDIO_AO=3.3V Items Bluetooth specification (power class) Channel frequency (spacing) Number of RF Channel Item / Condition Center Frequency Channel Spacing Number of RF channel Output power 2402MHz Output power 2440MHz Output power 2480MHz Modulation Characteristics 1) f1avg 2) f2max (at 99.9%) 3) f2avg / f1avg Carrier frequency offset and drift 1) Frequency offset 2) Frequency drift 3) Drift rate Receiver sensitivity (PER < 30.8%) Maximum input signal level (PER < 30.8%) PER Report Integrity (-30dBm input) Contents Version 4.1(LE) 2402 to 2480 MHz (2MHz) 40 Min. 2402
0 0.5 1 225 185 0.8
-10 50 Typ.
2 40
Max. 2480
6 6.5 7 275
150 50 20
-70
65.4 Unit MHz MHz
dBm dBm dBm kHz kHz
kHz kHz kHz dBm dBm
Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 27 / 44 16. LAND PATTERN (TOP VIEW)
<Top View>
***Stencil design:
For 0.30.55mm electrodes, stencil pad is 0.24mm*0.44mm and should put in the center of the each conductor. For 0.80.8mm electrodes, stencil pad is 0.66mm*0.66mm and should put in the center of the each conductor.
***This is based on Muratas condition using the thickness of the stencil 100 um. So this is just the recommendation and needs to modify based on your condition. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 28 / 44 17. REFERENCE CIRCUIT Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. SDIO_CMDLBEE5ZZ1PJ-331GND1VBUCK_GND_PM2PWM_PM3VDD11_PM4GND5SDIO_DATA36SDIO_DATA27SDIO_DATA18SDIO_DATA09GND43LTE_UART_RXD44LTE_UART_TXD45CLK_REQ46DBG_UART_TXD47DBG_UART_RXD48QOW49GND502G_WIFI/BT_RF_IN22GND23ANT24GND253D_FRAME_SYNC26HCI_UART_RXD27HCI_UART_TXD28HCI_UART_RTS29HCI_UART_CTS30GND51GND52GND53GND54GND55GND56GND57GND58GND59GND60GND61GND62PCM_CLK31PCM_SYNC32PCM_IN33PCM_OUT34GND35VDDIO_XTAL36VDDIO_GPIO137GND38WLAN_EN39BT_EN40VDD_3P341VDDIO_AO42SDIO_CMD10SDIO_CLK11VDDIO_SDIO12SDIO_INTERRUPT_L13GND1432KHZ_CLK_IN15VDDIO_GPIO216HCI_UART_WAKEHOST17WLAN_RF_KILL_L18GND192G_WIFI/BT_RF_OUT20GND21BT_UART_CTSBT_UART_RTSBT_UART_RXDBT_UART_TXDLTE_UART_TXDLTE_UART_RXDWL_DEV_WAKEUP_HOST32KHz Clock inC747uFDBG_UART_TXDDBG_UART_RXDBT_PCM_OUTJ3RF-SOCKET_023415SMA connectorBT_DEV_WAKEUP_HOSTR1010KBT_PCM_SYNCBT_ENBT_PCM_CLKSDIO_CLKBT_PCM_INWLAN_EN1. VDD_3V3 is powered by 3.3V typically.2. VDDIO_AO, VDDIO_GPIO1, VDDIO_GPIO2, VDDIO_XTAL, VDDIO_SDIO can be powered by 1.8V or 3.3V. It should match the VIO voltage from host. For the each I/O voltage group of 1PJ module, please refer to 1PJ module datasheet.Notes for the power supply voltage:WLAN_ENOQWR510KR170RR13NUVDDIO_AOR12NUR11NUR310KR827C20.1uFR710KVDDIO_GPIO2BT_HOST_WAKEUP_DEV/3D_FRAME_SYNCTOLERANCE = 20%L11.5uHVDDIO_AOC31uFVDD_3V3VDDIO_GPIO1VDDIO_GPIO2WLAN ResetVDDIO_XTALJ2CON212R910KVDDIO_GPIO1WLAN_RF_KILL_LVDDIO_SDIOCLK_REQR610KVDDIO_AOR410KVDDIO_GPIO2R15NUR1410KSDIO_DATA3SW2SKQYA12SDIO_DATA2VDDIO_SDIOSDIO_DATA1R227BT_ENR110KC10.1uFBT ResetVDDIO_AOSW1SKQYA12J1CON212R160RSDIO_DATA0VDDIO_GPIO1VDDIO_SDIOVDDIO_XTALVDDIO_GPIO2VDDIO_AOC110.1uFC1010uFC61uFC52.2uFC410uFC81uFC91uFC13NUVDD_3V3C12NU Preliminary Specification Number : SP-ZZ1PJ-331-K 29 / 44 18. TAPE AND REEL PACKING
(1) Dimensions of Tape (Plastic tape) Feeding direction W F T E P P0 16+/-0.2 7.5+/-0.1 0.3+/-0.05 1.75+/-0.1 12+/-0.1 4+/-0.1 P2 A0 B0 K0 D0 D1
(2) Dimensions of Reel Unit: mm 2+/-0.1 7.8+/-0.1 7.6+/-0.1 1.25+/-0.1 1.5+0.1/-0 1.5+/-0.1 W1 W2 25.5 +/-1.0 29.5 +/-1.0 Unit: mm Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 30 / 44
[1] Feeding Hole : As specified in (1)
[2] Hole for chip : As specified in (1)
[3] Cover tape : 62 um in thickness
[4] Base tape : As specified in (1)
(3) Taping Diagrams
(4) Leader and Tail tape Feeding Hole Feeding Direction Chip Tail tape
(No components) Components No components Leader tape
(Cover tape alone) 160 to 190 mm 150mm min. 250 mm min. Feeding direction Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
[2][3][4][3][1] Preliminary Specification Number : SP-ZZ1PJ-331-K 31 / 44
-The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. 1.1 N max. Cover tape 165 to 180
-The cover tape and base tape are not adhered at no components area for 250 mm min.
-Tear off strength against pulling of cover tape: 5 N min.
-Packaging unit: 1000 pcs/ reel
- Material: Base tape: Plastic Reel : Plastic Cover tape, cavity tape and reel are made the anti-static processing.
- Peeling of force: 1.1 N max. in the direction of peeling as shown below.
- PACKAGE (Humidity proof packing) Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity indicator. Anti-humidity Plastic Bag Certification label Humidity Indicator Caution label Base tape Desiccant Label Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 32 / 44
- Box Box for plastic bag: 90 x 350 x 350 mm Carton box: 390 x 380 x 380 mm 5 boxes for plastic bag are stored to a carton box as below.
- Label Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 33 / 44 19. NOTICE 19.1. Storage Conditions:
Please use this product within 6month after receipt.
- The product shall be stored without opening the packing under the ambient temperature from 5 to 35deg.C and humidity from 20 to 70%RH.
(Packing materials, in particular, may be deformed at the temperature over 40deg.C.)
- The product left more than 6months after reception, it needs to be confirmed the solderbility before used.
- The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.).
- Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp object and dropping the product, shall not be applied in order not to damage the packing materials. This product is applicable to MSL3 (Based on JEDEC Standard J-STD-020)
- After the packing opened, the product shall be stored at <30deg.C / <60%RH and the product shall be used within 168hours.
- When the color of the indicator in the packing changed, the product shall be baked before soldering. Baking condition: 125+5/-0deg.C, 24hours, 1time The products shall be baked on the heat-resistant tray because the material (Base Tape, Reel Tape and Cover Tape) are not heat-resistant. 19.2. Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock may break products. Handle with care if products may have cracks or damages on their terminals, the characteristics of products may change. Do not touch products with bear hands that may result in poor solder ability and destroy by static electrical charge. 19.3. Standard PCB Design (Land Pattern and Dimensions):
All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern should be provided between IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is as Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to verify the characteristics in the actual set. When using non-standard lands, contact Murata beforehand. 19.4. Notice for Chip Placer:
When placing products on the PCB, products may be stressed and broken by uneven forces from a worn-out chucking locating claw or a suction nozzle. To prevent products from damages, be sure to follow the specifications for the maintenance of the chip placer being used. For the positioning of products on the PCB, be aware that mechanical chucking may damage products. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 34 / 44 19.5. Soldering Conditions:
The recommendation conditions of soldering are as in the following figure. When products are immersed in solvent after mounting, pay special attention to maintain the temperature difference within 100 C. Soldering must be carried out by the above mentioned conditions to prevent products from damage. Set up the highest temperature of reflow within 260 C. Contact Murata before use if concerning other soldering conditions. Reflow soldering standard conditions(Example) time(s) Within 3s Within 60s Within 120s 180 deg.C 150 deg.C 220 deg.C 235 to 245 deg.C Pre-heating Cooling down Slowly Please use the reflow within 2 times. Use rosin type flux or weakly active flux with a chlorine content of 0.2 wt % or less. 19.6. Cleaning:
Since this Product is Moisture Sensitive, any cleaning is not permitted. 19.7. Operational Environment Conditions:
Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
- In an atmosphere containing combustible and volatile gases.
- Dusty place.
- Direct sunlight place.
- Water splashing place.
- Humid place where water condenses.
- Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 35 / 44 Input Power Capacity:
static electricity or excessive voltage while assembling and measuring. 19.8. Products shall be used in the input power capacity as specified in this specifications. Inform Murata beforehand, in case that the components are used beyond such input power capacity range. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 36 / 44 20. PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS.
- Aircraft equipment. - Aerospace equipment - Undersea equipment.
- Power plant control equipment - Medical equipment.
- Transportation equipment (vehicles, trains, ships, elevator, etc.).
- Traffic signal equipment. - Disaster prevention / crime prevention equipment.
-Burning / explosion control equipment
- Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, breaking, reverse-engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. By signing on specification sheet or approval sheet, you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. When you are not able to return the signed version of specification sheet or approval sheet within 30 days from receiving date of specification sheet or approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by
- the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the product to be sold by you,
-deviation or lapse in function of engineering sample,
-improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you cant agree the above contents, you should inquire our sales. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 37 / 44 Appendix Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 38 / 44 LBEE5ZZ1PJ Installation Manual (FCC) FCC ID of this module is as follows;
FCC ID:
VPYLBEE5ZZ1PJ Contents 1. Theory of operation 2. Antenna 3. Notice 1. Theory of operation Frequency of operation 2.4GHz W52 W53 W56 W58 Scan 2412MHz 2462MHz (ch1 ch11) 2422MHz 2452MHz (ch3 ch9) Ad-hoc mode Yes Active 802.11b/g/n-HT20 Yes Active 802.11n-HT40 Yes Active 802.11a/n-HT20/ac-VHT-20 5180MHz 5240MHz (ch36 ch48) Yes Active 5190MHz 5239MHz (ch38 ch46) 802.11n-HT40/ac-VHT-40 Yes Active 5210MHz (ch42) 802.11ac-VHT80 Passive No 802.11a/n-HT20/ac-VHT-20 5260MHz 5320MHz (ch52 ch64) Passive No 5270MHz 5310MHz (ch54 ch62) 802.11n-HT40/ac-VHT-40 802.11ac-VHT80 Passive No 5290MHz (ch58) 802.11a/n-HT20/ac-VHT-20 5500MHz 5720MHz (ch100 ch144) Passive No 5510MHz 5710MHz (ch102 ch142) Passive No 802.11n-HT40/ac-VHT-40 5530MHz 5690MHz (ch106 ch138) Passive No 802.11ac-VHT80 Yes 802.11a/n-HT20/ac-VHT-20 5745MHz 5825MHz (ch149 ch165) Active Yes 5755MHz 5795MHz (ch151 ch159) Active 802.11n-HT40/ac-VHT-40 Yes Active 5775MH (ch155) 802.11ac-VHT80 The device cannot operate in 5600MHz~5650MHz band in Canada Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20ppm End users cannot modify the software because F/W & driver are installed in device. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 39 / 44 2. Antenna Please refer to KDB 996369 Please perform the antenna design that followed the specifications of the antenna. About the signal line between an antenna or antenna connector and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. 1) It is the same type as the antenna type of antenna specifications. 2) An antenna gain is lower than a gain given in antenna specifications. 3) The emission level is not getting worse. 50-ohm feed line(microstrip line length) Antenna type Antenna
(1) 2.4GHz Monopole PCB Antenna 5GHz Monopole PCB Antenna
(2) 2.4GHz/5GHz PIFA Antenna
(3) 2.4GHz/5GHz PCB Antenna We test the (1) Monopole PCB Antennas at 26.4mm, (2) the PIFA Antenna at 4mm, and (3) PCB Antenna at 6mm as a representative respectively 50-ohm feed line length 3. Notice For OEM integration only device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID: VPYLBEE5ZZ1PJ or Contains FCC ID: VPYLBEE5ZZ1PJ Please describe the following warning to the manual. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When the product is small, as for these words mentioned above, the posting to a manual is possible. When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. RF Exposure requirements are met when installed in mobile equipment. This module cannot be installed in portable equipment without further testing and a change to FCC's grant of authorization. Contact Murata regarding portable applications. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 40 / 44 less than 2.0 dBi(2.4GHz), 2.0 Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3-a) The use of an monopole PCB antenna with gain dBi(5.15~5.35GHz), 1.2 dBi (5.47~5.725GHz) and 1.0 dBi (5.725~5.85GHz). 3-b) The use of a PIFA antenna with gain less than 3.29 dBi(2.4GHz) and 4.32 dBi (5GHz). 3-c) The use of a PCB antenna with gain less than 2.8dBi(2.4GHz) and 3.8dBi(5GHz). As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: VPYLBEE5ZZ1PJ. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 41 / 44 LBEE5ZZ1PJ Installation Manual (IC) IC No. of this device is as follows;
IC:
772C-LBEE5ZZ1PJ Contents 1. Theory of operation 2. Antenna 3. Notice 1. Theory of operation Frequency of operation 2.4GHz W52 W53 W56 W58 Scan 2412MHz 2462MHz (ch1 ch11) 2422MHz 2452MHz (ch3 ch9) Ad-hoc mode Yes Active 802.11b/g/n-HT20 Yes Active 802.11n-HT40 Yes Active 802.11a/n-HT20/ac-VHT-20 5180MHz 5240MHz (ch36 ch48) Yes Active 5190MHz 5239MHz (ch38 ch46) 802.11n-HT40/ac-VHT-40 Yes Active 5210MHz (ch42) 802.11ac-VHT80 Passive No 802.11a/n-HT20/ac-VHT-20 5260MHz 5320MHz (ch52 ch64) Passive No 5270MHz 5310MHz (ch54 ch62) 802.11n-HT40/ac-VHT-40 802.11ac-VHT80 Passive No 5290MHz (ch58) 802.11a/n-HT20/ac-VHT-20 5500MHz 5720MHz (ch100 ch144) Passive No 5510MHz 5710MHz (ch102 ch142) Passive No 802.11n-HT40/ac-VHT-40 5530MHz 5690MHz (ch106 ch138) Passive No 802.11ac-VHT80 Yes 802.11a/n-HT20/ac-VHT-20 5745MHz 5825MHz (ch149 ch165) Active Yes 5755MHz 5795MHz (ch151 ch159) Active 802.11n-HT40/ac-VHT-40 Yes Active 5775MH (ch155) 802.11ac-VHT80 The device cannot operate in 5600MHz~5650MHz band in Canada Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. La transmission des donnes est toujours initie par le logiciel, puis les donnes sont transmises par
'intermdiaire du MAC, par la bande de base numrique et analogique et, enfin, la puce RF. Plusieurs paquets spciaux sont initis par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numrique active l'metteur RF, puis dsactive celui-ci la fin du paquet. En consquence, l'metteur reste uniquement activ lors de la transmission d'un des paquets susmentionns. En d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence d'information transmettre ou de dfaillance. End users cannot modify the software because F/W & driver are installed in device. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 42 / 44 2. Antenna Please refer to KDB 996369 Please perform the antenna design that followed the specifications of the antenna. About the signal line between an antenna or an antenna connector and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. 1) It is the same type as the antenna type of antenna specifications. 2) An antenna gain is lower than a gain given in antenna specifications. 3) The emission level is not getting worse. 50-ohm feed line(microstrip line length) Antenna type Antenna
(1) 2.4GHz Monopole PCB Antenna 5GHz Monopole PCB Antenna
(2) 2.4GHz/5GHz PIFA Antenna
(3) 2.4GHz/5GHz PCB Antenna We test the (1) Monopole PCB Antennas at 26.4mm, (2) the PIFA Antenna at 4mm, and (3) PCB Antenna at 6mm as a representative respectively 50-ohm feed line length 3. Notice For OEM integration only device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains IC: 772C-LBEE5ZZ1PJ This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) lappareil ne doit pas produire de brouillage;
2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement.
*When the product is small, as for these words mentioned above, the posting to a manual is possible. 5150-5250 MHz band is restricted to indoor operation only. La bande 5150-5250 MHz est restreinte une utilisation lintrieur seulement. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont dsigns utilisateurs principaux (c.--d., qu'ils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 43 / 44 When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from persons body. Cet quipement est conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. Cet quipement doit tre install et utilis en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. RF Exposure requirements are met when installed in mobile equipment. This module cannot be installed in portable equipment without further testing and a change to IC's grant of authorization. Contact Murata regarding portable applications. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3-a) The use of an monopole PCB antenna with gain dBi(5.15~5.35GHz), 1.2 dBi (5.47~5.725GHz) and 1.0 dBi (5.725~5.85GHz). 3-b) The use of a PIFA antenna with gain less than 3.29 dBi(2.4GHz) and 4.32 dBi (5GHz). 3-c) The use of a PCB antenna with gain less than 2.8dBi(2.4GHz) and 3.8dBi(5GHz) than 2.0 dBi(2.4GHz), 2.0 less As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module) 1)L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2)Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 3 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. La transmission des donnes est toujours initie par le logiciel, puis les donnes sont transmises par
'intermdiaire du MAC, par la bande de base numrique et analogique et, enfin, la puce RF. Plusieurs paquets spciaux sont initis par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numrique active l'metteur RF, puis dsactive celui-ci la fin du paquet. En consquence, l'metteur reste uniquement activ lors de la transmission d'un des paquets susmentionns. En Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd. Preliminary Specification Number : SP-ZZ1PJ-331-K 44 / 44 d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence d'information transmettre ou de dfaillance. IMPORTANT NOTE:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et
'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 772C-LBEE5ZZ1PJ . Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante:
"Contient des IC: 772C-LBEE5ZZ1PJ ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Preliminary & Confidential
< Specification may be changed by Murata without notice >
Murata(China) Investment Co., Ltd.
This product uses the FCC Data API but is not endorsed or certified by the FCC