| submitted | available | document details (if available) | source link |
|---|---|---|---|
| August 30 2016 | February 26 2017 | NETGEAR AC750 WiFi Range Extender Model EX6100 User Manual NETGEAR Acrobat Distiller 8.1.0 (Windows) |
| various | User Manual | Users Manual | 1.29 MiB | August 30 2016 / February 26 2017 |
AC750 WiFi Range Extender Model EX6100 User Manual October 2015 202-11307-05 350 East Plumeria Drive San Jose, CA 95134 USA AC750 WiFi Range Extender Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Conformity For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621. Compliance For regulatory compliance information, visit http://www.netgear.com/about/regulatory. See the regulatory compliance document before connecting the power supply. Trademarks NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only. 2 AC750 WiFi Range Extender Contents Chapter 1 Get to Know Your Extender Front Panel and Side Panel LEDs and Buttons . 6 When to Use Your Extender . 7 Support for the 802.11ac Networking Standard. 8 Chapter 2 Get Started Use the Extender in Extender Mode. 10 Place the Extender and Apply Power . 10 Connect to an Existing WiFi Network . 10 Use the Extender in Access Point Mode. 15 Access Extender Settings . 16 Run Smart Setup . 17 Chapter 3 Extender Network Settings View Connected Devices . 19 Boost Your Video Streaming With FastLane Technology . 19 View WiFi Settings. 21 Change the WiFi Network Name . 22 Turn Off the SSID Broadcast to Create a Hidden Network . 22 Disable or Enable the WiFi Radios . 23 Change the WiFi Speed. 24 Use WPS to Add a Computer to the Extenders WiFi Network . 25 Use WPS With the Push Button Method . 26 Use WPS With the PIN Method. 27 Deny Access to a Computer or WiFi Device . 27 Set Up an Access Schedule. 29 Change the Extenders Device Name . 30 Set Up the Extender to Use a Static IP Address . 31 Use the Extender With MAC Filtering or Access Control. 32 Chapter 4 Monitor and Maintain the Extender Change the Extender User Name and Password. 34 Turn Password Protection Off and On . 35 Recover a Forgotten User Name or Password. 35 Automatically Adjust for Daylight Saving Time. 36 Manually Set the Extender Clock . 36 Back Up and Manage the Extender Configuration . 37 Back Up the Configuration Settings . 37 Restore the Configuration Settings . 38 Return the Extender to Its Factory Settings . 39 Use the Factory Reset Button to Restore Factory Settings . 39 3 AC750 WiFi Range Extender Erase the Settings and Return to Factory Settings . 39 Update the Firmware . 40 Restart the Extender Remotely . 41 Chapter 5 FAQs and Troubleshooting FAQs . 44 Cannot Connect to the Extender . 45 Cannot Join a WiFi Network. 45 Appendix A Supplemental Information Factory Default Settings . 47 Technical Specifications . 47 4 1. Get to Know Your Extender 1 The AC750 WiFi Range Extender boosts your existing network range and speed, delivering dual-band WiFi. You can also use the extender in access point mode as a WiFi access point and create a new WiFi hotspot by using a wired Ethernet connection. This chapter covers the following topics:
Front Panel and Side Panel LEDs and Buttons When to Use Your Extender Support for the 802.11ac Networking Standard Note: For more information about the topics covered in this manual, visit the support website at www.netgear.com/support. Note: Firmware updates with new features and bug fixes are made available from time to time on downloadcenter.netgear.com. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, you might need to update your firmware. 5 AC750 WiFi Range Extender Front Panel and Side Panel LEDs and Buttons The LEDs are located on the front panel. A switch, buttons, and an Ethernet port are located on the side panel. Router Link LED Router Arrow LED Client Arrow LED Client Link LED Power LED WPS LED Access Point/Extender switch Power On/Off button WPS button Factory Reset button Ethernet port Figure 1. Extender front panel and side panel Table 1. LEDs LED Description Router Link LED This LED indicates the connection between the extender and the router or access point. Solid green. Best connection. Solid amber. Good connection. Solid red. Poor connection. Off. No connection. Client Link LED This LED indicates the connection between the extender and a computer or mobile device. Solid green. Best connection. Solid amber. Good connection. Solid red. Poor connection. Off. No connection. Get to Know Your Extender 6 AC750 WiFi Range Extender Table 1. LEDs (continued) LED Description Power LED WPS LED Solid amber. The extender is booting. Solid green. The extender is powered on. Off. The extender is powered off. Solid green. WiFi security is enabled (WPA or WPA2). Blinking green. The extender is making a WPS connection. Off. WiFi security is not enabled. When to Use Your Extender We recommend that you connect to the extender only when your WiFi network connection is poor. Data traffic routed through the extender is inherently slower than traffic routed directly from the network. How the Extender Works The extender works like a bridge between a WiFi router (or a WiFi access point) and a WiFi device outside the range of the WiFi router. The extender performs two main jobs:
The extender connects to a working WiFi network. When the extender connects over WiFi to an existing network, it functions as a network client, similar to how a WiFi device connects to a network. The extender acts as an access point for WiFi devices. The extender broadcasts its own WiFi network that WiFi devices can join. In its role as an access point, the extender performs tasks that WiFi routers do, such as broadcasting its network name (SSID). The extender must do each of these jobs so that both ends of the bridge are in place. WiFi Range Extender Boosts the range of your existing WiFi and creates a stronger signal in hard-to-reach areas. Figure 2. Range extender in a home Get to Know Your Extender 7 Existing WiFi Sometimes your router does not provide the WiFi coverage that you need. AC750 WiFi Range Extender Support for the 802.11ac Networking Standard The extender supports the 802.11ac networking standard. This new standard offers better speed, improved reliability, and more range than older WiFi networking standards. The extender is backward compatible with earlier WiFi standards. However, to get the benefits of 802.11ac, your WiFi router must support the 802.11ac WiFi networking standard. To learn more about the 802.11ac WiFi networking standard, visit netgear.com/landing/80211ac/. Figure 3. Speed comparison between the 802.11n and 802.11ac standards Get to Know Your Extender 8 2. Get Started This chapter covers the following topics:
Use the Extender in Extender Mode Use the Extender in Access Point Mode Access Extender Settings Run Smart Setup 2 9 AC750 WiFi Range Extender Use the Extender in Extender Mode The extender repeats signals from an existing WiFi router or access point. Place the extender, apply power, and connect the extender to your WiFi network. Note: You can also use the extender as a WiFi access point and create a new WiFi hotspot by using a wired Ethernet connection. See Use the Extender in Access Point Mode on page 15. Place the Extender and Apply Power To place the extender and apply power:
1. Set the Access Point/Extender switch 2. Place your extender in the same room as your WiFi router. to the Extender position. Proximity to the WiFi router is required only during the initial setup process. 3. Plug the extender into an electrical outlet. 4. Wait for the Power LED to light green. If the Power LED does not light, press the Power On/Off button on the extender. Connect to an Existing WiFi Network To extend the range of your WiFi network, you must connect the extender to your existing WiFi network. You can do this in one of two ways:
Connect with WPS. For more information, see Connect With WPS on page Connect with web browser setup. For more information, see Connect With Web 10. Browser Setup on page 12. Connect With WPS Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password. Note: WPS does not support WEP network security. If you are using WEP security, follow the instructions in Connect With Web Browser Setup on page 12. Get Started 10 AC750 WiFi Range Extender To use WPS to connect the extender to your WiFi router:
1. Press the WPS button on the side panel of the extender. The WPS LED blinks. 2. Within two minutes, press the WPS button on your router or access point. When the extender connects to your existing WiFi network, the WPS LED on the extender lights solid green and the Router Link LED lights. If the Router Link LED does not light, try again. If it still does not light, see Connect With Web Browser Setup on page If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender to the 5 GHz band. 12. 3. 4. Unplug the extender and move it to a new location that is about halfway between your router and the area with a poor router WiFi signal. The location that you choose must be within the range of your existing WiFi router network. 5. Plug the extender into an electrical outlet and wait for the Power LED 6. Use the Router Link LED to help you choose a spot where the extender-to-router to light green. 7. connection is optimal. If the Router Link LED does not light amber or green, plug the extender into an outlet closer to the router and try again. Keep moving the extender to outlets closer to the router until the Router Link LED lights amber or green. 8. On your computer or WiFi device, find and connect to the new extended WiFi network. The extender creates two new extended WiFi networks. The extenders new WiFi network names are based on your existing WiFi network name, with _EXT at the end of the name. For example:
Existing WiFi network name. MyNetworkName New extended network names. MyNetworkName_2GEXT and MyNetworkName_5GEXT Use the same WiFi password that you use for your WiFi router. Get Started 11 AC750 WiFi Range Extender 9. Test the extended WiFi range by moving your computer or WiFi device to the area with a poor router WiFi signal:
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and return to the extender. b. Check the Client Link LED on the extender:
If the Client Link LED is solid green or amber, your extended WiFi network reaches the area with a poor router WiFi signal and your network setup is complete. If the Client Link LED is red, your extended WiFi network does not reach the area with a poor router WiFi signal. You must move the computer or WiFi device closer to the extender until the Client Link LED turns solid green or amber. Connect With Web Browser Setup To connect with web browser setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the extender WiFi network EX6100_NETGEAR_2EXT. After the connection with the computer or WiFi device is established, the Client Link LED lights. 2. Launch a web browser. 3. Enter www.mywifiext.net in the address field of the browser. The New Extender Setup page displays. 4. Click the NEW EXTENDER SETUP button. 5. Complete the fields on the page and click the NEXT button. 6. Verify that the Access Point/Extender switch is set to Extender and click the Continue button. Get Started 12 AC750 WiFi Range Extender 7. Select a WiFi network to extend and click the NEXT button. If you do not want to extend both WiFi bands, clear the 2.4 GHz WiFi Networks or the 5 GHz WiFi Networks check box. In the Password (Network Key) field, type the existing WiFi network password (also called passphrase or security key) and click the NEXT button. 8. 9. Set the network name (SSID) and password for your new extender WiFi network and click the NEXT button. Wait for the page to display a list of available extended WiFi networks, which might take up to one minute. 10. Connect the computer or WiFi device to the new extended WiFi network using the extender SSID and password that you created in Step 9. Note: To connect additional devices, repeat Step 10. 11. Make sure that your computer or WiFi device is connected before you click the Continue button. 12. Click the Continue button. A message displays confirming that the extender is connected and ready. 13. Click the Next button. The registration page displays. 14. Complete the registration fields and click the Finish button to complete the setup. If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status page displays. 15. Unplug the extender and move it to a new location that is about halfway between your router and the area with a poor router WiFi signal. The location that you choose must be within the range of your existing WiFi router network. 16. Plug the extender into an electrical outlet and wait for the Power LED to light green. 17. Use the Router Link LED to help you choose a spot where the extender-to-router connection is optimal. Get Started 13 AC750 WiFi Range Extender 18. If the Router Link LED doesnt light amber or green, plug the extender into an outlet closer to the router and try again. Keep moving the extender to outlets closer to the router until the Router Link LED lights amber or green. 19. Reconnect your computer or WiFi device to the new extended WiFi network. 20. Test the extended WiFi range by moving your computer or WiFi device to the area with a poor router WiFi signal:
a. Leave your computer or WiFi device in the area with a poor router WiFi signal and return to the extender. b. Check the Client Link LED on the extender:
If the Client Link LED is solid green or amber, your extended WiFi network reaches the area with a poor router WiFi signal and your network setup is complete. If the Client Link LED is red, your extended WiFi network does not reach the area with a poor router WiFi signal. You must move the computer or WiFi device closer to the extender until the Client Link LED turns solid green or amber. Connect Ethernet-Enabled Devices After the extender is connected to your existing WiFi network, you can connect a device to the extender using an Ethernet cable. Then that device can access your existing network through the extender-to-router WiFi connection. Blu-ray player Extender WiFi router Figure 4. Ethernet connection to the extender Get Started 14 AC750 WiFi Range Extender Use the Extender in Access Point Mode You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using a wired Ethernet connection. Figure 5. Extender as an access point To install the extender as an access point:
1. Set the Access Point/Extender switch to the Access Point position. 2. Use an Ethernet cable to connect the Ethernet port on the extender to an Ethernet LAN port on a router or a remote Ethernet LAN jack with LAN access. 3. Plug the extender into an electrical outlet and wait for the Power LED 4. 5. Use a WiFi network manager on a computer or WiFi device to find and connect to the If the Power LED does not light, press the Power On/Off button. EX6100_NETGEAR_2GEXT or the EX6100_NETGEAR_5GEXT WiFi network. to light green. Get Started 15 AC750 WiFi Range Extender After the connection with the computer or WiFi device is established, the Client Link LED lights. 6. Launch a web browser and enter www.mywifiext.net in the address field. The New Extender Setup page displays. 7. Click the NEW EXTENDER SETUP button. The Create Account page displays. 8. Complete the fields on the page and click the NEXT button. 9. Verify that the Access Point/Extender switch is set to Access Point and click the Continue button. The extender checks for an Internet connection. 10. Click the HOME NETWORK or PUBLIC NETWORK button. 11. Set the network name (SSID), security option, and password for each access point network and click the NEXT button. Your settings are applied and the extender is ready to be used as an access point. 12. Use a WiFi network manager on the computer or WiFi device to connect to the new access point WiFi network. 13. Click the Continue button. A page displays that says you successfully created an access point. 14. Click the Next button. The registration page displays. 15. Follow the onscreen instructions to register your extender. Access Extender Settings After installation, you can log in to the extender to view or change the extenders settings. To log in to the extender:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the new extended WiFi network. After the connection with the computer or WiFi device is established, the Client Link LED lights. 2. Launch a web browser. 3. Enter www.mywifiext.net in the address field of the browser. A login window opens. 4. Enter your user name and password and click the LOG IN button. The Status page displays. Get Started 16 AC750 WiFi Range Extender Run Smart Setup You can use Smart Setup to change the extender settings. This is an easy way to connect the extender to a different router or to change the extender WiFi network name (SSID) or WiFi password. To run Smart Setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the new extended WiFi network. After the connection with the computer or WiFi device is established, the Device Link LED lights solid green. 2. Launch a web browser. 3. Enter www.mywifiext.net in the address field of the browser. A login window opens. 4. Enter your user name and password and click the LOG IN button. The Status page displays. 5. Click the SMART SETUP button. The Welcome page displays. 6. Click the WIFI RANGE EXTENDER button. The extender scans for WiFi signals and finds the WiFi networks in your area and displays a list. 7. Select your WiFi network and click the NEXT button. 8. When prompted, enter the password to connect to your WiFi network and click the NEXT button. A message displays when the extender connects to your existing routers WiFi network. 9. Click the NEXT button. The extender applies your settings to its WiFi network names and WiFi passwords. During this change, the extender disconnects you from its WiFi network. 10. When prompted, connect your WiFi devices to the extender WiFi network and click the CONTINUE button. The registration page displays. 11. Complete the registration fields and click the FINISH button to complete the setup. If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support. The Status page displays. Get Started 17 3. Extender Network Settings 3 This chapter covers the following topics:
Turn Off the SSID Broadcast to Create a Hidden Network View Connected Devices Boost Your Video Streaming With FastLane Technology View WiFi Settings Change the WiFi Network Name Disable or Enable the WiFi Radios Change the WiFi Speed Use WPS to Add a Computer to the Extenders WiFi Network Deny Access to a Computer or WiFi Device Set Up an Access Schedule Change the Extenders Device Name Set Up the Extender to Use a Static IP Address Use the Extender With MAC Filtering or Access Control 18 AC750 WiFi Range Extender View Connected Devices You can view a list of devices that are connected to the extender network. To view connected devices:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Connected Devices.
, click it. Boost Your Video Streaming With FastLane Technology Get the most out of your HD entertainment with FastLane technology. With FastLane technology, the extender connects to your router using one band and connects to your devices using another band. Because a band is dedicated to each function, performance is enhanced. If all your devices and your WiFi router support only the 2.4 GHz band, or all your devices and your WiFi router support only the 5 GHz band, do not enable FastLane Technology. Extender Network Settings 19 AC750 WiFi Range Extender When you enable FastLane Technology, two options are available:
Use the 2.4 GHz band to connect the extender to the WiFi devices and use the 5 GHz band to connect the extender to the WiFi router. Use this mode if your WiFi router supports the 5 support the 2.4 GHz band. band but the devices that you want to use for gaming and streaming GHz Use the 5 GHz band to connect the extender to the WiFi devices and use the 2.4 GHz band to connect the extender to the WiFi router. Use this mode if the devices that you want to use for gaming and streaming support the 5 GHz band but your WiFi router supports the 2.4 band. GHz To activate FastLane mode:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Do More > FastLane.
, click it. 6. Select the FastLane Technology radio button. The page adjusts and displays two more radio buttons. Extender Network Settings 20 AC750 WiFi Range Extender 7. Select a radio button:
Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5 GHz only Router to Extender in 5 GHz only and Extender-to-Device in 2.4 GHz only 8. Click the Save button. Your settings are saved. View WiFi Settings To view the WiFi settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless.
, click it. Extender Network Settings 21 AC750 WiFi Range Extender Change the WiFi Network Name To change the WiFi network name:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless.
, click it. In each Network Name (SSID) field, type a network name. 6. 7. Click the SAVE button. Your settings are saved. Turn Off the SSID Broadcast to Create a Hidden Network By default, the extender broadcasts its WiFi signal so that its WiFi network names (SSIDs) are easy for you to find and connect to from your computer, tablet, or smartphone. You can Extender Network Settings 22 AC750 WiFi Range Extender turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden network you must know its SSID and password and manually enter them. To turn off the SSID broadcast to create a hidden network:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless.
, click it. 6. Clear the Broadcast the Network name (SSID) check box. 7. Click the SAVE button. Your settings are saved. Disable or Enable the WiFi Radios By default, the extenders WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If you disable the WiFi radios, then no one can connect with WiFi to the extender. Extender Network Settings 23 AC750 WiFi Range Extender To enable or disable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless.
, click it. 6. Select or clear the Enable 2.4 GHz WiFi check box. 7. Select or clear the Enable 5 GHz WiFi check box. 8. Click the SAVE button. Your settings are saved. Change the WiFi Speed To change the WiFi speed:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser. Extender Network Settings 24 AC750 WiFi Range Extender 2. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless.
, click it. In each WiFi Speed menu, select a speed. 6. 7. Click the SAVE button. Your settings are saved. Use WPS to Add a Computer to the Extenders WiFi Network WPS (Wi-Fi Protected Setup) lets you connect a computer or WiFi device to the extenders network without entering the WiFi network passphrase or key. Instead, you use a WPS button or enter a PIN to connect. If you use the push button method, the WiFi device that you are trying to connect must include a physical button or a software button. If you use the PIN method, you must know the PIN of the WiFi device that you are trying to connect. Extender Network Settings 25 AC750 WiFi Range Extender WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the extender network and generates a random passphrase. You can view this passphrase on the WiFi Settings page (for more information, see View WiFi Settings on page For information about using WPS to connect the extender to a WiFi network during setup, see Use the Extender in Access Point Mode on page 21). 15. Use WPS With the Push Button Method For you to use the push button method to connect a WiFi device to the extenders WiFi network, the WiFi device that you are trying to connect must include a physical WPS button or an onscreen WPS button that you can click. To use WPS to add a computer or WiFi device to the extenders WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays.
, click it. 5. Select Do More > Connect Devices (WPS). 6. Leave the Push Button (recommended) radio button selected. 7. Click the WIFI PROTECTED SETUP (WPS) button. For two minutes, the extender attempts to add the computer or WiFi device to its WiFi network. 8. Within two minutes, go to the computer WiFi device and press or click its WPS button. 9. To verify that the WiFi device is connected to the extenders WiFi network, select Settings > Connected Devices. The WiFi device displays on the page. Extender Network Settings 26 AC750 WiFi Range Extender Use WPS With the PIN Method To use the PIN method to connect a WiFi device to the extenders WiFi network, you must know the PIN of the WiFi device that you are trying to connect. To add a computer or WiFi device to the extenders WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser. In the address field of your browser, enter www.mywifiext.net. 2. 3. When prompted, enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays.
, click it. 5. Select Do More > Connect Devices (WPS). The Connect Devices (WPS) page displays. 6. Select the PIN Number radio button. 7. Type the PIN of the WiFi device in the field. 8. Click the NEXT button. For four minutes, the extender attempts to find the computer or WiFi device. 9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi network. 10. To verify that the WiFi device is connected to the extenders WiFi network, select Settings > Connected Devices. The WiFi device displays on the page. Deny Access to a Computer or WiFi Device By default, access control is disabled so that it is easy for you to connect to the extenders WiFi networks. Extender Network Settings 27 AC750 WiFi Range Extender You can deny network access to specific computers and WiFi devices based on their MAC addresses. Each network device is assigned a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 09, af, or AF only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the WiFi device. If you cannot access the label, you can display the MAC address using the network configuration utilities of the computer. You might also find the MAC addresses on the Connected Devices page (see View Connected Devices on page 19). To use WiFi access control to deny access:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser. In the address field of your browser, enter www.mywifiext.net. 2. 3. When prompted, enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Connected Devices.
, click it. 6. In the WiFi Devices section, select the Enable Access Control check box. The WiFi Devices table displays the names and MAC addresses of WiFi devices that are connected to the extender. 7. Select the Deny check box for the device. 8. Click the SAVE button. Extender Network Settings 28 AC750 WiFi Range Extender Your settings are saved and that device cannot connect to the extenders WiFi network. Set Up an Access Schedule You can control access to all users during specific periods of the day. You can set up an access schedule that prevents Internet access through the extender network based on the times that you set. To set up an access schedule:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser. In the address field of your browser, enter www.mywifiext.net. 2. 3. When prompted, enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Do More > Access Schedule.
, click it. 6. Select the Access Schedule On radio button. The page adjusts. In the Days menu and the Time menu, select the day and time when you want to disable Internet access. 7. 8. Click the Add Time button. The time you specified is added to the Scheduled Times table. 9. Click the SAVE button. Your settings are saved. Extender Network Settings 29 AC750 WiFi Range Extender Change the Extenders Device Name The default name is EX6100. To change the extenders device name:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless. The WiFi Settings page displays.
, click it. 6. Scroll down and click the IP Address heading. In the Device Name field, type a name. 7. 8. Click the SAVE button. Your settings are saved. Extender Network Settings 30 AC750 WiFi Range Extender Set Up the Extender to Use a Static IP Address The extender comes set up to use a dynamic IP address, which is the correct setting for most home networks. To set up the extender to use a static IP address:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Wireless. The WiFi Settings page displays.
, click it. 6. Scroll down and click the IP Address heading. By default, the Dynamically get IP Address from Router radio button is selected. 7. Select the Use Static IP Address radio button. 8. Complete the fields to specify the IP network IP addresses. Extender Network Settings 31 AC750 WiFi Range Extender 9. Click the SAVE button. Your settings are saved. Use the Extender With MAC Filtering or Access Control When the WiFi device connects through the extender to your router, the MAC address of the WiFi device that is shown on the router is translated to another MAC address. If your routers MAC filter, WiFi access control, or ACL is enabled, the WiFi device connects to the extender but cannot get an IP address from the extender and cannot access the Internet. To allow the WiFi device to receive an IP address from the extender and access the Internet, you must provide the translated MAC address to the router. To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, WiFi access control, or ACL. For information about how to disable your routers MAC filter, WiFi access control, or ACL, see your routers documentation. 2. Power on the extender and connect all of your WiFi devices to the extender. 3. Make sure that the Link Rate LED remains lit. 4. Log in to your extender:
a. Launch a web browser. b. Enter www.mywifiext.net in the address field of the browser. A login page opens. c. Enter your user name and password and click the LOG IN button. The Status page displays 5. If your browser displays the Menu icon The extender menu displays. 6. Select Settings > Connected Devices.
, click it. The Connected Devices page displays the MAC addresses and virtual MAC addresses for computers and WiFi devices that are connected to the extender network. 7. On the router, add the extenders virtual MAC address and all the virtual MAC addresses connected to the extender network to your routers MAC filter table. 8. Enable the routers MAC filter, WiFi access control, or ACL. Extender Network Settings 32 4. Monitor and Maintain the Extender 4 This chapter covers the following topics:
Turn Password Protection Off and On Change the Extender User Name and Password Recover a Forgotten User Name or Password Automatically Adjust for Daylight Saving Time Manually Set the Extender Clock Back Up and Manage the Extender Configuration Return the Extender to Its Factory Settings Update the Firmware Restart the Extender Remotely 33 AC750 WiFi Range Extender Change the Extender User Name and Password You can change the user name and password to log in to the extender. To add an extender user:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Password.
, click it. In the New User Name field, type a user name. 6. 7. Type the password in the New Password field and the Verify Password field. 8. Select questions and enter the answers. 9. Click the SAVE button. Your settings are saved. Monitor and Maintain the Extender 34 AC750 WiFi Range Extender Turn Password Protection Off and On We recommend that you leave password protection on to help keep your network secure. You can turn password protection off and on. To turn password protection off or on:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Password. The Password Settings page displays.
, click it. 6. Select the Password Off or Password On radio button. 7. Click the SAVE button. Your settings are saved. Recover a Forgotten User Name or Password If you changed the password to access the extender and set up password recovery, you can recover your password if you lose it. To recover your password to access the extender:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. You are prompted to enter a user name and password. 3. Click the Username & Password Help link. A page displays requesting the answers to your security questions. If you forgot the answers to your security questions, restore the extenders factory settings and set up your user name and password again. See Return the Extender to Its Factory Settings on page 39 and Chapter 2, Get Started. 4. Enter the saved answers to your security questions. 5. Click the NEXT button. Monitor and Maintain the Extender 35 AC750 WiFi Range Extender Your email and password are displayed. 6. Click the BACK button. A login window opens. Log in to the extender. Automatically Adjust for Daylight Saving Time 1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Do More > Access Schedule. The Access Schedule page displays.
, click it. 6. Select the Automatically adjust for daylight savings time check box. 7. Click the SAVE button. Your settings are saved. Manually Set the Extender Clock To manually set the extender clock:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Do More > Access Schedule. The Access Schedule page displays.
, click it. Monitor and Maintain the Extender 36 AC750 WiFi Range Extender In the Extender Clock section, select the Manual radio button. 6. 7. To specify the time, complete the fields or click the Sync Clock button to synchronize the extender time to the time on the computer or WiFi device that you are using. 8. Click the SAVE button. Your settings are saved. Back Up and Manage the Extender Configuration When the extender works correctly after initial setup, we recommend that you back up the extender configuration settings. After you back up the settings, if you change the extender configuration settings but are not content with the new settings, you can restore the extender configuration to the backed-up settings. Back Up the Configuration Settings You can back up the configuration file of the extender. To back up the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays.
, click it. 5. Select Settings > Other. 6. Click the BACKUP button. Your browser extracts the configuration file from the extender. By default, the name of the backup file is NETGEAR_Ex6100.cfg. Monitor and Maintain the Extender 37 AC750 WiFi Range Extender 7. If your browser is not set up to save downloaded files automatically, locate where you want to save the file. 8. Click the OK button. The extender configuration settings are backed up. Restore the Configuration Settings You can restore the configuration file of the extender to a previously saved configuration file. To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays.
, click it. 5. Select Settings > Other. 6. Click the BROWSE button. 7. Locate and select the previously saved backup file. By default, the name of the backup file is NETGEAR_EX6000.cfg. CAUTION:
After you click the RESTORE button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting. 8. Click the RESTORE button. A confirmation pop-up window opens. Monitor and Maintain the Extender 38 AC750 WiFi Range Extender 9. Confirm your decision. The extender configuration is restored and the extender restarts. This process takes about one minute. Return the Extender to Its Factory Settings To reset the extender to its factory settings, you can use the Factory Reset button or the Erase feature. For information about the factory settings, see Factory Default Settings on page 47. Use the Factory Reset Button to Restore Factory Settings CAUTION:
This process erases any settings that you have configured in the extender. To restore factory settings:
1. Insert a paper clip into the Factory Reset hole and hold it until the Power LED blinks amber. 2. Release the button. All the LEDs turn off for about 3 seconds. The Power LED lights solid amber for about 30 seconds. The Power LED lights solid green. The extender returns to its factory settings. When you plug in the extender, it detects the position of its Access Point/Extender switch. Erase the Settings and Return to Factory Settings CAUTION:
This process erases any settings that you have configured in the extender. To erase the extenders current settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser. In the address field of your browser, enter www.mywifiext.net. 2. Monitor and Maintain the Extender 39 AC750 WiFi Range Extender A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. 4. If your browser displays the Menu icon The extender menu displays. 5. Select Settings > Other Settings.
, click it. CAUTION:
After you click the RESET button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting. 6. Click the RESET button. A confirmation pop-up window opens. 7. Confirm your decision. The extender returns to its factory settings and restarts. This process takes about one minute. Update the Firmware Unless you changed the settings in the Firmware Update page previously, the extender is set up to check for new firmware automatically at login. To check manually for new firmware and, if available, update the firmware:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. The Status page displays. Monitor and Maintain the Extender 40 AC750 WiFi Range Extender 4. If your browser displays the Menu icon The extender menu displays.
, click it. 5. Select Firmware Update. 6. Click the CHECK ONLINE button. 7. If new firmware is available, follow the onscreen prompts to download it onto your computer. Note: You might need to unzip the firmware file. 8. Click the BROWSE button. 9. Locate and select the new firmware file. The firmware file name ends with a .chk extension. CAUTION:
After you click the UPLOAD button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting. 10. Click the UPLOAD button. The firmware update starts and the extender restarts. The firmware update process takes about two minutes. Restart the Extender Remotely You can log in to the extender and restart it. When the extender restarts, all computers and WiFi devices that are connected to its WiFi network are automatically disconnected. To restart the extender remotely:
1. On a computer or WiFi device that is connected to the extender network, launch a web 2. browser. In the address field of your browser, enter www.mywifiext.net. A login page opens. 3. Enter your user name and password and click the LOG IN button. Monitor and Maintain the Extender 41 AC750 WiFi Range Extender The Status page displays. 4. If your browser displays the Menu icon The extender menu displays.
, click it. 5. Select Settings > Other. The Other Settings page displays. 6. Click the RESTART button and click the Yes button to confirm. The extender restarts, which takes about two minutes. Monitor and Maintain the Extender 42 5. FAQs and Troubleshooting This chapter covers the following topics:
FAQs Cannot Connect to the Extender Cannot Join a WiFi Network 5 43 AC750 WiFi Range Extender FAQs 10. This section provides answers for difficulties you might experience with the extender. The web browser setup keeps asking me for my network password (passphrase) or security key, and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered by the router or access point. For more information about where the place the extender, see Place the Extender and Apply Power on page If you are using WEP security, make sure that you are typing the network password in the correct field. Can I set up the extender in extender mode if I connect it to the router or access point with an Ethernet cable?
No. The extender is designed to connect wirelessly to the router or access point if it is in extender mode. If the extender is in access point mode, you can connect it to the router or access point with an Ethernet connection. For more information about access point mode, see Use the Extender in Access Point Mode on page I forgot my login user name and password. What can I do?
In the login window, click the Username & Password Help link to answer the security questions that you set up during the initial setup. For more information, see Recover a Forgotten User Name or Password on page How do I restore the extender to its factory default settings?
15. 35. To restore factory settings:
1. Use a sharp object such as a pen or paper clip to press and hold the Factory Reset button on the extender until the Power LED blinks amber. 2. Release the Factory Reset button and wait for the extender to reboot. The extender resets and returns to the factory default settings. I am connected to the extender WiFi network and launched a browser. Why cant I see the web browser setup?
Try these troubleshooting steps:
Make sure that your computer is set up to use DHCP (most are). Make sure that the Device Link LED is green and that you are using a valid IP address. Relaunch the web browser and enter www.mywifiext.net in the address field. Type your user name and password and click the LOG IN button. FAQs and Troubleshooting 44 AC750 WiFi Range Extender Cannot Connect to the Extender 44. If you cannot connect to the extender, determine what prevents you from connecting:
If you forgot your user name or password, click the Username & Password Help link. For more information, see FAQs on page If your browser displays an error page, include http:// in the address field of your browser by typing http://www.mywifiext.net. If you already set up the extender but can no longer connect to it over WiFi, check to see if the Device Link LED is off or red. This indicates a poor connection or no connection. Check to see if you accidentally connected to a different WiFi network instead of the extender network. If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Cannot Join a WiFi Network 17) to select a WiFi network and retype the To join a WiFi network, you must know its network name (also called the SSID) so that you can select it. If the network is secure, you must know the passphrase or key. If the extender does not connect to the network that you select, the cause might be one of the following:
It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart Setup (see Run Smart Setup on page passphrase or key. The passphrase or key is case-sensitive. For example, PASSWORD25 is not the same as Password25 or password25. If the extender cannot detect your WiFi network, check to see if your WiFi network is still working. Make sure that the WiFi router is turned on. If possible, move the extender closer to the WiFi router. If the extender Device Link LED is red, the WiFi connection between the WiFi router and the extender is poor. You can establish the best connection with a clear line of sight between the extender and the WiFi router. Make sure that no physical obstacles exist between the extender and the WiFi router, and try to move the extender closer to the WiFi router. If you use Smart Setup, and the extender does not connect to the WiFi router, does not connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup displays a message to notify you that the extender is not configured. To run Smart Setup again, click the YES button. To manually configure the extender, click the NO, CONFIGURE MANUALLY button. FAQs and Troubleshooting 45 A. Supplemental Information This appendix includes the following sections:
Factory Default Settings Technical Specifications A 46 AC750 WiFi Range Extender Factory Default Settings The following table includes the factory settings for the extender. You can use the Factory Reset button or the Erase feature to return the extender to these settings. (See Return the Extender to Its Factory Settings on page Table 2. Factory default settings 39.) Feature Setup Wizard Wireless communication Wireless network names (SSIDs) Security Transmission speed Country/region Operating mode Data rate DHCP Setting Enabled Enabled 2.4 GHz network: EX6100_NETGEAR_2GEXT 5 GHz network: EX6100_NETGEAR_5GEXT Disabled Auto1 Varies by region 802.11ac, 802.11n, 802.11g, 802.11b, 802.11a Up to 300 Mbps for 2.4 GHz network and 433 Mbps for 5 GHz network Client enabled 1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Technical Specifications The following table includes the product specifications. Table 3. Technical specifications Feature Description Network protocol and standards compatibility Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT (many-to-one) Power consumption 100240V, 50/60 Hz, 0.21A maximum Physical specifications Dimensions: 122 x 74 x 38 mm (4.8 x 2.9 x 1.5 in.) Weight: 213 g (8.15 oz.) Supplemental Information 47 AC750 WiFi Range Extender Table 3. Technical specifications (continued) Feature Environmental Description Operating temperature: 32 to 140F (0 to 40C) Operating humidity: 90% maximum relative humidity, noncondensing Electromagnetic emissions: Meets requirements of FCC Part 15 Class B. Interface Local: 10BASE-T, 100/1000BASE-Tx, RJ-45 802.11ac, 802.11n, 802.11a, 802.11g, 802.11b Supplemental Information 48
This product uses the FCC Data API but is not endorsed or certified by the FCC