150U1 Wireless-N Broadband Router Users Manual

Company: NEXXT SOLUTIONS

FCC ID: X4Y150U1

submitted	available	document details (if available)	source link
December 08 2012	December 08 2012	Microsoft Word - NEXXT说明书.doc user Acrobat Distiller 7.0 (Windows)

exhibit
download
text

various

Users Manual

Users Manual

pdf

788.11 KiB

December 08 2012

11N Wireless User Guide Wirless N Broadband Router N3 11N Wireless User Guide Contents CHAPTER 1 PRODUCT INTRODUCTION 1.1 Package Contents .................................. 1 1.2 LED Indicators and Port Description .......... 1 CHAPTER 2 PRODUCT INSTALLATION ........................ 3 CHAPTER 3 HOW TO CONFIGURE TO ACCESS THE INTERNET ............................................................................. 5 3.1 How to Set the Network Configurations ..... 5 3.2 Log in to the Router ............................. 10 3.3 Fast Internet Access ............................. 10 3.4 Fast Encryption .................................... 10 CHAPTER 4 ADVANCED SETTINGS .............................. 12 4.1 System Status ..................................... 12 4.2 WAN Settings ...................................... 13 4.3 LAN Settings ....................................... 15 4.4 DNS Settings ....................................... 15 4.5 WAN Medium Type ............................... 16 4.6 Bandwidth Control ............................... 17 4.7 Traffic Statistics ................................... 18 CHAPTER 5 WLAN SETTINGS ....................................... 19 5.1 Wireless Basic Settings ......................... 19 5.2 Wireless Security Settings ..................... 20 5.2.1 WPS Settings .................................... 21 5.2.2 WPA- PSK ........................................ 21 5.2.3 WPA2- PSK ....................................... 22 5.3 Wireless Access Control ........................ 22 5.4 Connection Status ................................ 22 11N Wireless User Guide CHAPTER 6 DHCP SERVER ............................................. 23 6.1 DHCP Server ....................................... 23 6.2 DHCP Client List ................................... 23 CHAPTER 7 VIRTUAL SERVER ...................................... 24 7.1 Port Range Forwarding .......................... 24 7.2 DMZ Settings ...................................... 26 7.3 UPNP Settings ..................................... 26 CHAPTER 8 SECURITY SETTINGS ............................... 27 8.1 Client Filter Settings ............................. 27 8.2 MAC Address Filter ............................... 27 8.3 URL Filter Settings ............................... 28 8.4 Remote Web Management ..................... 29 CHAPTER 9 ROUTING SETTINGS ................................. 30 9.1 Routing Table ...................................... 30 9.2 Static Routing...................................... 30 CHAPTER 10 SYSTEM TOOLS ........................................ 31 10.1 TIME SETTINGS ..................................... 31 10.2 DDNS ............................................... 31 10.3 Backup/Restore ................................. 32 10.4 Restore to Factory Default ................... 33 10.5 Upgrade ............................................ 33 10.6 Reboot the Router .............................. 34 10.7 Password Change ............................... 34 10.8 Syslog .............................................. 34 10.9 Log out ............................................. 34 APPENDIX 1 GLOSSARY .................................................. 35 APPENDIX 2 PRODUCT FEATURES .............................. 36 APPENDIX 3 FAQ ............................................................... 37 11N Wireless User Guide APPENDIX 4 CLEAR WIRELESS CONFIGURATION . 39 APPENDIX 5 REGULATORY INFORMATION ............. 41 11N Wireless User Guide 1.1 Package Contents Please verify the following items after you open the package:

One Wireless N Broadband Router One Quick Installation Guide

One Power Adapter

One Software CD If any of the listed items are missing or damaged, please contact the reseller for immediate replacement. 1.2 LED Indicators and Port Description Panel and LED indicators show:

LED indicator description on the front panel 1 11N Wireless User Guide Back panel port description 2 11N Wireless User Guide Chapter 2 Product Installation In this user guide, we take W316R as an example to explain the installation steps. The installation steps of other products are similar to this one. 1. Please use only the included power adapter to power your router. (NOTE: Use of an unmatched power adapter could cause damage to this product). 2. Please connect the routers LAN port to your computer with an Ethernet cable as shown below. 3. Please connect your broadband line provided by your ISP to the routers WAN port. 3 11N Wireless User Guide 4. Insert the included software CD into the CD drive of your computer. After the software automatically initiates, double click the Setup icon and follow the instructions to complete the installation. You can also enter the routers Web-based Utility to complete the configuration. 4 11N Wireless User Guide Chapter 3 How to configure to access the Internet 3.1 How to Set the Network Configurations Network Configurations under windows XP 1. Right click My Network Places on your computer desktop and select Properties. 2. Right click Local Area Connection and select Properties. 3. Select Internet Protocol (TCP/IP) and click Properties. 5 11N Wireless User Guide 4. Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to save the configurations. Or select Use the following IP address and enter the IP address, Subnet mask, Default gateway as follows:

IP Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 DNS server: You should input the DNS server address provided by your ISP. Otherwise, you can enter 192.168.0.1. Click OK to save the configurations. 9 11N Wireless User Guide 3.2 Log in to the Router 1. To access the Routers Web-based Utility, launch a web browser such as Internet Explorer or Firefox and enter http://192.168.0.1. Press Enter. 2. The system will automatically choose the corresponding web language in accordance with the Browsers language. For example, if your Browsers language is French, the routers web language will display as French. 3. If your Browser language is English or beyond the 9 languages (Arabic, French, German, Italian, Polish, Portuguese, Russian, Spanish, Turkish), the routers web language will be English. 3.3 Fast Internet Access Two kinds of fast access methods are provided on the routers web-based utility: ADSL dial-up and DHCP. If you select ADSL dial-up, you only need to enter the access account and access password as well as the wireless password, and then click Ok to complete the settings. If you select DHCP, you only need to enter the wireless password and click Ok to complete the settings. The default access method is ADSL dial-up and the access account and access password are the same as the ADSL dial-up account and password, which you can inquire your broadband ISP. For other access methods, please refer to WAN settings in chapter 4.The wireless password can only consist of 8 characters, the default is 12345678 and you can modify it when necessary. 3.4 Fast Encryption 10 11N Wireless User Guide The router provides two encryption setting screens, one is simple and easy, the other is advanced (For advanced setting, please refer to chapter 5.2). Simple and easy screen:

Log on to the routers web-based utility and you may set encryption for the router. The default adopts WPA-PSK mode and AES Algorithm. The default password is 12345678, as shown below. NOTE: The wireless password can only be 8 characters in length and the default is 12345678, you can modify it when necessary. 11 11N Wireless User Guide Chapter 4 Advanced Settings 4.1 System Status System status screen allows you to view the routers WAN port status and system status.

Connection status: It displays the routers WAN connection status. Disconnected: It indicates the routers WAN port hasnt been connected with the network cable. Connecting: It indicates the routers WAN port is obtaining IP address. Connected: It indicates the Router is well connected with the ISP.

WAN IPIP address obtained from ISP.

Subnet mask: Obtained from ISP. Gateway: Obtained from ISP. DNS server: Obtained from ISP. Alternate DNS server: Obtained from ISP. Connection type: It displays your current access method. LAN MAC addressIt displays the Routers LAN MAC address.

WAN MAC addressIt displays the Routers WAN MAC Address. 12 11N Wireless User Guide System timeIt displays the systems updated time Connected client It displays the number of the connected computers(normally it displays the number of clients whose IP addresses obtained via DHCP server) Software versionIt displays the Routers software version Hardware versionIt displays the Routers hardware version.

4.2 WAN Settings Virtual Dial-up (PPPoE)

Mode: Show your current connection mode. Access Account: Enter the account provided by your ISP. Access Password: Enter the password provided by your ISP. MTU: Maximum Transmission Unit. It is the size of the largest data packet that can be sent over the network. The default value is 1492. Do NOT modify it unless necessary, but if a specific website or web application software cannot open or be enabled, you can try to change the MTU value to 1450, 1400, etc. Service Name: The connection name for current PPPOE, enter it if necessary otherwise, leave it blank. AC Name: The service name, enter it if necessaryotherwise, leave it blank. Connect Automatically: Connect automatically to the Internet after rebooting the system or connection failure. Connect on Demand: Re-establish your connection to the Internet after the specific time (Max Idle Time). Zero means you are connected to the Internet all times. Otherwise, enter the minutes to be elapsed before you are disconnected from the Internet. Connect Manually: Connect to the Internet by users manually. Connect on Fixed Time: Connect to the Internet during the time you fix automatically. NOTE:

The Connect on Fixed Time goes into effect only when you have set the current time in Time settings from System tools. Static IP If your ISP provides you the static IP, please choose static IP, and you need to enter the IP address, subnet mask, gateway, DNS server and alternate DNS server provided by your 13 11N Wireless User Guide ISP or network administrator

Mode: Show your current connection mode. IP address: Enter the WAN IP address provided by your ISP. If you are not clear, please inquire your local ISP. Subnet mask: Enter the WAN Subnet Mask provided by your ISP. Generally it is 255.255.255.0 Gateway: Enter the Gateway provided by your ISP. If you are not clear, please inquire your local ISP. DNS server: Enter the necessary DNS server provided by your ISP. Alternate DNS server: Enter the second DNS address if your ISP provides, which is optional. Dynamic IP (Via DHCP) If your connection mode is Dynamic IP, it means every time you access the Internet, you will get a different IP. You dont need to enter any parameters in this mode, just Click Ok to finish the settings. PPTP

Mode: Show your current connection mode. PPTP server address: The IP address or domain name of the destination server and it is used to specify the destination address which needs for PPTP connection. Username/Password: Used to validate identity when connecting to the PPTP server. Address mode: Set the routers IP address mode, you can select either Dynamic or Static. If your ISP doesnt provide the IP address, please select Dynamic. IP address: Please enter the IP address provided by your ISP, inquire your local ISP if you are not clear. Subnet mask: Please enter the subnet mask provided by your ISP ,generally its 255.255.255.0 Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP. 14 11N Wireless User Guide L2TP

Mode: Show your current connection mode. L2TP server address: The IP address or domain name of the destination server and it is used to specify the destination address which needs for L2TP connection. Username/Password: Used to validate identity when connecting to the L2TP server. Address mode: Set the routers IP address mode, you can select either Dynamic or Static. If your ISP doesnt provide the IP address, please select Dynamic. IP address: Please enter the IP address provided by your ISP, inquire your local ISP if you are not clear. Subnet mask: Please enter the subnet mask provided by your ISP ,generally its 255.255.255.0 Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP. 4.3 LAN Settings Click Advanced settings LAN settings to enter the following screen.

LAN MAC address: The Routers LAN MAC address, which is unchangeable. IP address: The Routers LAN IP address (not your PCs IP address).The default value is 192.168.0.1; you can change it when necessary. Subnet mask: The Routers LAN subnet mask. The default value is 255.255.255.0 NOTE:

Once you modify the IP address, you need to remember it for next time you log in to the web-based utility. 4.4 DNS Settings DNS stands for Domain Name System (or Service).

DNS setting: Select to enable the DNS server. Primary DNS address: Enter the necessary address provided by your ISP. 15 11N Wireless User Guide

Alternate DNS address: Enter the second DNS address if your ISP provides, which is optional. NOTE:

After the settings are completed, reboot the device to activate the modified settings. 4.5 WAN Medium Type Wired WAN and wireless WAN NOTE: This function applies only to some of the products. Wired WAN: In this mode, the cable is directly connected to the WAN port. Wired WAN is the default mode. Wireless WAN: Enable this mode if your ISP provides you wireless connection service or you want to use it to amplify wireless signals. SSID: SSID (Service Set Identifier) is the identity of the wireless device. You can only access to the ISP network by entering the correct SSID, namely the SSID of the ISPs wireless device. You can click the Open scan button to let the router automatically search the ISPs available SSID. The SSID can also be the SSID of the superior wireless device when using wireless bridge. MAC: To connect to the ISPs wireless device, you need to know the devices MAC address. You can click the Open scan button to let the router automatically search the wireless devices MAC or superior wireless devices MAC. Channel: The wireless devices communication channel. You must select the same channel as the ISPs wireless device to enable their communications. It can also be scanned by clicking the Open scan button. Security mode: When the ISP wireless device is secured, the access device should set the same security mode, encryption mode and key as the ISP wireless device. For example If your ISP wireless devices SSID is wireless, then just enter the ISPs SSID, wireless MAC address, and channel respectively into the corresponding fields of the above picture. If the ISP device is secured, please set your routers encryption type the same as the ISP devices .Or you can click the Open scan button to let the router automatically fill in the SSID, Channel and wireless MAC. After saving, come back to the WAN Setting screen to select the corresponding WAN connection type to complete the settings (For example, if 16 11N Wireless User Guide your ISP wireless devices connection type is dynamic IP, just select DHCP). 4.6 Bandwidth Control Bandwidth control is used to limit the communication traffic of LAN computers when accessing the Internet. It can simultaneously control maximum of 254 PCs' traffic. In addition, IP address range configuration is supported.

Enable Bandwidth Control: To enable or disable the internal IP bandwidth control. The default is disabled. IP Address: The IP address range of the hosts whose traffic has been controlled. It can be a single IP address or IP address range. Upload/Download: To specify the traffic heading way for the selected IP addresses:

upload or download. Bandwidth Range: The maximum and minimum upload/download data traffic of the hosts in specified IP range. The unit is KByte/s. The uplink of upload and download can not exceed the WAN port bandwidth limitation range. Enable: To enable the current edited rule. Otherwise, the rule will not go into effect. Add to list: After you edit the rule, click the add to list button to add the current rule to the rule list. is 2Mbps=256KByte/s, and Here we take 2Mbps bandwidth as an example. Theoretically, the biggest downloading rate for 2Mbps bandwidth is 512kbps=64KByte/s Example 1 If you want to set the download rate of the computer at the IP address of 192.168.0.100 as 80-90KByte/s, upload rate as 10-15KByte/s, first add one upload rule as shown in the picture below:

the biggest uploading rate 1. Enter 192.168.0.100 in the IP address field 2. Select upload in the Upload/Download field. 3. Enter 10-15 in the bandwidth range field 4. Select Enable 5. Click Add to list 6. Click Ok to finish the upload rule settings. And then add a download rule as shown in the picture below. 17 11N Wireless User Guide The setting method is the same as the above. Example 2 Set range of 192.168.0.2--192.168.0.254 as 100-120KByte/s, and the upload rate as 20-30KByte/s, as shown in the picture below. rate of all computers within the download the The setting method is the same as Example 1. 4.7 Traffic Statistics Traffic statistics is used to display the bandwidth that LAN PC used. Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers. You can enable it to calculate the traffic for you. Usually, disable it to improve the routers data packet processing ability, and the default is disabled. When this function is enabled, the webpage will refresh automatically every five minutes, meanwhile, each computers traffic value will refresh automatically.

IP address: the IP address of the computer whose traffic is being calculated. Uplink rate: the data sending speed per second, the unit is KByte/s. Downlink rate: the data receiving speed per second, the unit is KByte/s. Sent message: the number of the calculated computers data packets that are sent out through the router. Sent Bytes: the volume of the calculated computers statistics that is sent out through the router Received message: the number of the calculated computers the data packets that are received through the router. Received Bytes: the volume of the calculated computers statistics that is received through the router.

18 11N Wireless User Guide Chapter 5 WLAN Settings 5.1 Wireless Basic Settings

Enable wireless function: Select to enable the Routers wireless features; deselect to disable it and all functions related with wireless are disabled.

Wireless working mode: This router provides two kinds of working modes: Wireless Access Point(AP) and Network Bridge (WDS) Wireless Access Point (AP)

Network Mode: Select one mode from the drop-down list. 11b modeSelect it if you have only Wireless-B clients in your network. 11g modeSelect it if you have only Wireless-G clients in your network. 11b/g mixed mode: Select it if you have only Wireless-B and Wireless-G clients in your network. 11b/g/n mixed mode: Select it if you have Wireless-B, Wireless-G and Wireless-N clients in your network. SSID: It is the unique name of the wireless network and can be modified. The SSID must be entered. Broadcast (SSID): Select Enable to enable the router SSID to be scannable by wireless devices. The default is enabled. If you disable it, the wireless devices must know the SSID for communication. Channel: The currently used channel by the router. Select an effective channel (from 1 to 13\Auto) of the wireless network.

WMM Capable: Enable it to enhance the transfer performance of the wirelessly transferred multimedia data (such as video or online playing).We recommend enabling this option if you are not familiar with WMM. APSD Capable: It is used for auto power-saved service. The default is disabled. Channel bandwidth: Select an appropriate channel bandwidth to enhance the wireless performance. Select 20/40M when the network has 11b/g and 11n wireless clients. Select 20M when the network has only non-11n wireless clients. Select 20/40M to promote its throughput when the wireless network is in 11n mode. Extension Channel: To confirm the networks frequency range in 11n mode. NOTE: Some products may have primary SSID and secondary SSID options, as

19 shown below. Primary SSID is necessary, secondary SSID is optional. 11N Wireless User Guide Network Bridge (WDS) Settings WDS (Wireless Distribution System) is used to expand wireless coverage area.

AP MAC address: Input the MAC address of another (opposing) wireless router you want to connect. Example: This example is to bridge two W316R routers. 1. If you know the connecting routers MAC address, please enter it into the AP MAC address field and click Ok. 2. You can also search for the wireless routers signal by scanning. a) Click Open scan and click the scanned signal and click the Ok button on the dialog box and the corresponding wireless MAC address will be added to the AP MAC address field automatically. b) Click Ok after the MAC address is added. After finishing the above steps, you need to set the other W316R router in the same way. NOTE:

WDS feature requires both routers support this function and the SSID, channel, encryption method and password are the same as those of the connecting router. 5.2 Wireless Security Settings With the wireless security function, you can prevent others from connecting to your wireless network and using the network resources without your consent. Meanwhile, you can also block illegal users from intercepting or intruding your wireless network. 20 11N Wireless User Guide 5.2.1 WPS Settings WPS (Wi-Fi Protected Setting) makes it quick and easy to establish a secure connection between the wireless clients and the router. The users only need to enter a PIN code or press WPS button on the back panel to configure it without manually selecting an encryption method or set a key.

WPS settings: To enable or disable WPS function. The default is Enable.

WPS mode: Provide two ways: PBC (Push-Button Configuration) and PIN code.

PBC: Select the PBC and click Ok, or press and hold the WPS button on the back panel of the device for about one second. The WPS LED indicator will be flashing for 2 minutes, which means the WPS is enabled. During this time (flashing WPS LED), you can enable the wireless client to implement the WPS/PBC negotiation between them. When the WPS connection is completed, the LED indicator will be continuously lit. To add more clients, repeat the above steps.) PIN: If this option is enabled, you need to enter a wireless clients PIN code in the field and keep the same code in the WPS client. Reset OOB: Press this button, the WPS client will be in an idle state, and the WPS indicator will turn off. AP will not respond to the WPS clients connection request and will set the security mode as Open-None (Disable) mode.

NOTE:

The use of WPS function requires the wireless adapter to support this function. 5.2.2 WPA- PSK WPA guarantees to protect WLAN users data and only the authorized network users can have access to WLAN.

WPA Algorithms: Provides TKIP [Temporal Key Integrity Protocol] or AES

[Advanced Encryption Standard]. Key: Enter the pass phrase that consists of 8-63 ASCII characters. Key Renewal Interval: Set the keys renewal period, which tells the device how often it should change the dynamic keys.

21 11N Wireless User Guide 5.2.3 WPA2- PSK WPA2 (Wi-Fi Protected Access version 2) provides higher security than and WPA (Wi-Fi Protected Access).

WPA Algorithms: Provides TKIP [Temporal Key Integrity Protocol] or AES

5.3 Wireless Access Control Wireless access control is actually based on the MAC address to permit or forbid specific clients to access the wireless network. MAC address filter: Permit indicates to allow the clients in the list to access the wireless network, Forbid indicates to prevent the clients in the list from accessing the wireless network. Configure MAC address: Input the MAC addresses of the wireless clients to implement the filter policy. Click Add to finish the MAC add operation. MAC Address list: Show the added MAC addresses. You can add or delete them.

5.4 Connection Status This screen shows wireless clients connection status, including MAC address, Channel bandwidth. MAC address: Shows the MAC addresses of the hosts connected to the Router. Bandwidth: Shows the channel bandwidth of the current connected hosts (wireless clients).

22 11N Wireless User Guide 6.1 DHCP Server Chapter 6 DHCP Server DHCP (Dynamic Host Control Protocol) is used to assign an IP address to the computers on the LAN/private network. When you enable the DHCP Server, the DHCP Server will allocate automatically an unused IP address from the IP address pool to the requesting computer in premise of activating Obtain an IP Address Automatically. So specifying the start and end address of the IP Address pool is needed. DHCP server: Check the Enable box to enable DHCP server. IP pool start/end address: Enter the range of IP addresses for DHCP server distribution. Lease time: It indicates the valid time of the dynamic IP address which is distributed to the DHCP clients host computer by DHCP server. During this time, the server will not distribute the IP address to any other host computer.

6.2 DHCP Client List DHCP client list displays user computer IP address, MAC address, host name and other information which are assigned by the DHCP server. You can manually enter the IP and MAC address and convert them to static assignment.

Host name: It displays the name of the computer whose IP is allocated by the DHCP server. IP address: Enter the IP address which needs static binding. MAC address: Enter the MAC address of the computer you want to bind. Click Add to add the entry in the list. Lease time: The remaining time length of the corresponding IP address lease. 23 11N Wireless User Guide Chapter 7 Virtual Server 7.1 Port Range Forwarding

Start/End port: Enter the start/end port number which ranges the External ports used to set the server or Internet applications. LAN IP: Enter the IP address of the PC which you want to set as the server. Protocol: Select the protocol (TCP/UDP/Both) for the application. If you are not clear about the protocol you are using, you can select Both. Enable: Click the Enable checkbox to bring the set rule into effect. Delete: Clear all settings of this item.

Well-known service port: The well-known protocol ports are listed in the drop-down list. Select one and select a sequence number in the ID drop-down list and then click Add, this port will be added automatically to the ID list. For other well known service ports that are not listed, you can manually add them to the list. Add to: Add the selected well-known port to the policy ID.

For Example: You want to share some large files with your friends outside of your local area network, however, they are too big, and its not convenient to transfer them. Then, you can build a FTP server on your computer and set the routers port range forwarding to enable your friends to access to these files on your computer. Suppose that your FTP server or your computers static IP address is 192.168.0.10, and you wish your friends can access the server through the default port 21 and adopts TCP protocol. Please follow the steps below to configure. 1.Enter 21 in both start port and end port fields, or you can also select FTP from the well-known service port and its port 21 will be added to the corresponding field automatically. 2. Enter 192.168.0.10 in the LAN IP column, and then select Both as the protocol and select Enable. 3. As the picture shown below. 4. Click the Ok button to save the settings. And now, when your friends want to visit the FTP server, they only need to enter ftp://xxx.xxx.xxx.xxx:21 in the address field. Here, xxx.xxx.xxx.xxx means the routers WAN IP address. For example, when your routers WAN IP address is 172.16.102.89; your friends need to enter ftp://172.16.102.89:21 in the address field. 24 11N Wireless User Guide NOTE:

If you set the service port of the virtual server as 80, you must set the Web management port on Remote Web Management screen to be any value except 80 such as 8080. Otherwise, there will be a conflict to disable the virtual server. 25 11N Wireless User Guide 7.2 DMZ Settings The DMZ Settings screen allows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC.

DMZ Host IP Address: The IP address of the LAN computer you want to set as DMZ host. Enable: Check to enable the DMZ host.

For example:

Set the computer at the IP address of 192.168.0.10 as DMZ host to connect another host on the Internet for intercommunication. NOTE:

When the DMZ host is enabled, the firewall settings of the DMZ host will not function. 7.3 UPNP Settings UPnP (Universal Plug and Play).With the UPnP function, the internal host can request the router to process some special port switching so as to enable the external host to visit the resources of the internal host.

Enable UPnP: Click the checkbox to enable the UPnP. NOTE:

This function goes into effect under Windows XP or Windows ME (NOTE: the system should integrate or have installed the Directx 9.0) or this function would go into effect if you have installed software that supports UPnP. 26 11N Wireless User Guide Chapter 8 Security Settings 8.1 Client Filter Settings You can enable client filter to control LAN computers access to some ports of the Internet

Filter Mode: You can select either Permit only or Forbid only. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. Start/End IP: Enter the start/end IP address. Port: Enter the controlled TCP/UDP protocol port. You can specify a port or port range. Type: Select one protocol (TCP/UDP/Both) from the drop-down list. Time: Select the time range of client filter. Date: Select the day(s) to run the access policy. Enable: To enable/disable the access policy (forbid/permit the packets matched with the access policy to pass through the router. Example1 Forbid LAN computers at the IP addresses of 192.168.0.100--192.168.0.120 to access the Internet. Example 2 Permit LAN computer with the IP address of 192.168.0.145 to access websites during 8:00 to 18:00 from Sunday to Saturday. 8.2 MAC Address Filter You can limit the computers access to Internet by MAC Address Filter.

Filter mode: You can select either Permit only or Forbid only. Access Policy: Select one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. MAC Address: Enter the MAC address you want to run the access policy. 27 11N Wireless User Guide

Time: Select the time range of MAC address filter. Date: Select the day(s) to run the access policy. Enable: To enable/disable the access policy (forbid/permit the packets matched with the access policy to pass through the router). Example 1 Forbid the computer with the MAC address of 00:E0:4C:69:A3:23 to access Internet during 8:00 to 18:00 from Monday to Friday. Example 2 Permit the computer with the MAC address of 00:E4:A5:44:35:69 to access Internet from Monday to Friday. 8.3 URL Filter Settings You can use URL filtering to forbid their access to certain websites at a specified time.

Time: Select the time range of URL filter. Date: Select the day(s) to run the access policy. Enable: To enable/disable the access policy (forbid /permit the packets matched with the access policy to pass through the router). Specify the text strings or keywords needed to be filtered. Example1 Forbid all computers on LAN to access baidu.com during 8:00 to 18:00 from Monday to Friday. Example2 Permit LAN computers with the IP addresses of 192.168.0.100- 192.168.0.115 to access yahoo.com. NOTE:

Enter only one domain name for each access policy for one access policy can only filter one domain name. So, if you want to filter multiple domain names, you need to set multiple access policies 28 11N Wireless User Guide 8.4 Remote Web Management This section instructs how to allow the network administrator to manage the Router remotely. If you want to access the Router from outside of the local network, please click the checkbox after Enable. Enable: Check to enable remote web management. Port: The management port open to outside access. The default value is 80. IP Address: Specify the range of the IP addresses of the computers on the Internet for remote management.

NOTE:

1. If you want to log in the devices Web-based Utility via port 8080, you need to use the format of WAN IP address: port (for example http//220.135.211.56:8080) to implement remote login. 2. If your WAN IP address starts and ends with 0.0.0.0, it means all hosts on the Internet can implement remote Web management. If you change the Internet IP address as 218.88.93.33-218.88.93.35, then only the computers at the IP addresses of 218.88.93.33, 218.88.93.34 and 218.88.93.35 can access the Router to implement remote web management. For example:

If you want to configure the computer at the IP address of 218.88.93.33 to access the routers web-based utility via port 8080, please set the parameters as above. 29 11N Wireless User Guide Chapter 9 Routing Settings 9.1 Routing Table This page shows the routers core routing table. The main duty for a router is to look for a best path for every data packet, and transfer this data packet to a destination station. In order to fulfill this function, many transferring paths, i.e. routing table, are saved in the router, for choosing when needed. 9.2 Static Routing This screen is used to set the routers static routing. A static route is a pre-determined pathway that network information must travel to reach a specific host or network. Destination network IP address: The destination host or IP segment you visit. Subnet mask: Enter the subnet mask, generally it is 255.255.255.0 Gateway: The entry IP address of the next router.

NOTE:

1. The gateway must be at the same net segment with the routers LAN IP. 2. If the destination IP address is one host address, then the subnet mask must be 255.255.255.255. 3. If the destination IP address is an IP segment, then it must match with the subnet mask. For example, if the destination IP is 10.0.0.0 then the subnet mask must be 255.0.0.0 30 11N Wireless User Guide 10.1 Time Settings Chapter 10 System Tools This section is to configure the routers system time. You can set it manually or obtain the GMT time from the Internet.

Time zone: Select the time zone where you are operating the Router from the drop-down list. Customized time: Enter the time you wish to configure. NOTE:

When the Router is powered off, the time settings will be lost. The router will obtain the GMT time automatically when you next time access the Internet. Only when you connect to the Internet and obtain the GMT time or set the time on this screen, can the time settings in other functions (e.g. security settings) take effect. 10.2 DDNS The DDNS (Dynamic Domain Name System) is supported in this Router. It is used to assign a fixed host and domain name to a dynamic Internet IP address. Every time you access the Internet, the dynamic domain name software installed on your host will tell the ISPS host server its dynamic IP address by sending messages. And the server software is responsible for providing DNS service and implementing dynamic domain name resolution.

Main features:

1. Mostly, your ISP provides a dynamic IP address and the DDNS is used to capture the changeable IP address and match to the fixed domain. Then users can have access to the Internet to communicate with others outside the network. 2. DDNS can help you to establish a virtual host in your home or company. DDNS: Click the radio button to enable or disable the DDNS service. Service provider: Select one from the drop-down list and click Sign up for registration. Username: Enter the username that you use to register from the DDNS provider Password: Enter the password that you use to register from the DDNS provider 31 11N Wireless User Guide Domain name: Enter the effective registered domain name

For example:

Establish a Web server in the local host 192.168.0.10 and register in 3322.org as follows:

Username Password Domain Name 123456

.3322.org After mapping the port in the virtual server, and setting account information in DDNS server, you can then access the web page by entering http:// .3322.org in the address field. 10.3 Backup/Restore On this screen, you can back up the routers current settings or restore previous settings.

Backup Setting:

Click the Backup button to back up the Routers settings and select a path to save them. Click the Save button to save the configuration files.

Restore Setting:

Click the Browse button to select the backup files. 32 11N Wireless User Guide Click the Restore button to restore previous settings. 10.4 Restore to Factory Default This screen allows you to restore all settings to the factory default values.

Restore: Click this button to restore to default settings. Factory default settings:

Password: NULL(the default password displays as null) IP address: 192.168.0.1 Subnet mask: 255.255.255.0 NOTE:

After restoring to default settings, please restart the router to make the default settings effective. 10.5 Upgrade By upgrading the routers software, youll get better software version and appreciated routing function. Before upgrading, download the Routers software upgrade file from our website, www. cn. 33 11N Wireless User Guide Browse: Click this button to select the upgrade file. Upgrade: Click this button to start the upgrading process. After the upgrade is completed, the router will reboot automatically.

10.6 Reboot the Router Reboot the router to make the configuration effective. The router will cut its WAN connection automatically after rebooting. Reboot the router: Click this button to reboot the router.

10.7 Password Change This section is to set a new password to better secure your router and network. Old password: Enter the old password. New password: Enter a new password. Confirm new password: Re-enter to confirm the new password.

NOTE:

The default password displays as null, users can log on the web-based utility without any authentication. To secure the router and your network, it is highly recommended that you change the initial password. 10.8 Syslog The section is to view the system log. You can view various conditions appearing after system start, and also check whether theres an attack on the network. The log can record at most 150 entries.

Refresh: Click this button to update the log. Clear: Click this button to clear the current shown log. 10.9 Log out 34 11N Wireless User Guide After all settings are finished, please click Log out to exit securely and completely. Appendix 1 Glossary Channel:

An instance of medium use for the purpose of passing protocol data units (PDUs) that may be used simultaneously, in the same volume of space, with other instances of medium use(on other channels) by other instances of the same physical layer (PHY),with an acceptably low frame error ratio(FER) due to mutual interference. SSID:

SSID (Service Set Identifier) is the network name shared by all devices in a wireless network. Your networks SSID should be unique to your network and identical for all devices within the network. It is case-sensitive and must not exceed 20 characters (use any of the characters on the keyboard).Make sure this setting is the same for all devices in your wireless network. WPA/WPA2 Encryption:

A security protocol for wireless networks that builds on the basic foundations of WEP. It secures wireless data transmission by using a key similar to WEP, but the added strength of WPA is that the key changes dynamically. The changing key makes it much more difficult for a hacker to learn the key and gain access to the network.WPA2 is the second generation of WPA security and provides a stronger encryption mechanism through Advanced Encryption Standard (AES), which is a requirement for some government users. 802,1x authentication Static WEP key is difficult to manage for when you change the key, you will have to inform all others, and if the key is disclosed in one of the places, the key can no longer provide security. Besides, theres severe security loophole about static WEP encryption. The WEP key can be decrypted after one person receives a specific amount of data via wireless intercepting. 802,1x is initially used for wired Ethernet authentication access to prevent illegal users from accessing the network. Later, it is found that 802.1x can better solve the wireless network security problem. EAP-TLS of the 802.1x successfully achieves the two-way authentication between users and networks, i.e. can prevent illegal users from accessing the network and can also prevent users from accessing the illegal AP. 802.1x utilizes dynamic WEP encryption to protect the WEP key from being decrypted. To solve the publishing problem for digital certification, people make some changes to TLS authentication and TTLS and EAP come into exist, which enable you to access the network by using the traditional way of authentication: username and password. 35 11N Wireless User Guide

Appendix 2 Product Features Supports IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards. High gain omni-directional antenna, with strong signals and long transmission distance.

Wireless transmission rate up to 150Mbps or 150 Mbps

Provides one 10/100Mbps auto-negotiation Ethernet WAN port to connect to the Wide Area Network Provides four 10/100Mbps auto-negotiation Ethernet LAN ports to connect to the Local Area Network Supports Auto MDI/MDIX Supports xDSL/Cable MODEM, static and dynamic IP in community broadband networking Includes router, wireless access point, four-port switch and firewall all in one SupportsWPA-PSK,WPA2-PSK,andWPA-PSK&WPA2-PSK mixed security modes Supports WPS button Supports hidden SSID function and MAC address-based access control Supports WMM to make your audio and video smoother Supports SNTP Supports UPnP and DDNS Supports WDS to extend wireless network Supports wireless WAN and allows access to ISPs wireless hotspots to share Internet access with multiple computers (this function applies only to some of the products). Supports virtual server, DMZ host Provides syslog to record the running status of the router

36 11N Wireless User Guide Appendix 3 FAQ This section provides some solutions to the problems which may occur during the routers installation or usage. The instructions below may help you deal with the problems. If your problem is not in the list, please log into our website www. .cn or send an E-mail to support@ .cn, and we will reply to you at the earliest time. 1. Can not log in to the Web-based Utility of the router after you enter the IP address in the address field?

Step 1: Check if the router is working correctly, after the device is powered on for a few seconds, the SYS indicator on the front panel should light up. If it is not, please contact us. Step 2: Check the network cables are connected correctly and the corresponding LED indicator lights up. Sometimes, the indicator lights up, but it does not mean it is functioning. Step 3: Run Ping command and check if it can ping the Routers LAN IP address 192.168.0.1 (open Command Prompt and type Ping 192.168.0.1 and then enter). If it is OK, please make sure your browser does not access the Internet by proxy server. If the ping fails, you can press the RESET button for 7 seconds to restore to default settings. And then repeat the ping operation. If it still does not work, please contact us. 2. Forgot the login password and cannot enter the Web-based Utility. What can I do?

Press the RESET button for 7 seconds to restore the Router to default settings. 3. The computer connected with the Router shows IP address conflict. What can do?

Check if there are other DHCP servers in the LAN and if there are then disable them. The default IP address of the router is 192.168.0.1 please maker sure the address is not being used by any other device. If there are two computers with the same IP address, please change one of them. 4. I cannot use E-mail and access the Internet. What can I do?

Sometimes happens with ADSL connection and Dynamic IP users. You may need to modify the default MTU value (1492). Please open the WAN Setting and modify the MTU value with the recommended value as 1450 or 1400. 37 11N Wireless User Guide 5.How to share my computers resource with other users in Internet If you want Internet users to access the internal server via the router such as: e-mail server, Web, FTP. You can configure the Virtual Server. Step 1: create your internal server, make sure the LAN users can access these servers and know related service port. For example, Web servers port is 80; FTP is 21; SMTP is 25 and POP3 is 110. Step 2: In the routers web click Virtual Server and select Port Range Forwarding. Step 3: Input the service port provided by the router (i.e. the external port) for mapping the internal and external network, for example, 80-80. Step 4: input the internal Web service port, for example, 80-80. Step 5: Input the internal servers IP address. For example, if your Web servers IP address is 192.168.0.10, please input it. Step 6: select the communication protocol used by your internal host: TCP, UDP, Both. Step 7: click Ok to activate the settings. The following table lists some well-known applications and their respective service ports:

Server Protocol Service Port WEB Server FTP Server Telnet NetMeeting MSN Messenger PPTP VPN Iphone5.0 SMTP POP3 TCP TCP TCP TCP 80 21 23 15031720 File Send:6891-6900(TCP) TCP/UDP Voice:18636901(TCP) Voice:18635190(UDP) TCP TCP TCP TCP 1723 22555 25 110 38 11N Wireless User Guide Appendix 4 Clear Wireless Configuration Clear Wireless configuration file under windows XP 1. Right click My Network Places on your computer desktop and select Properties. 2. Right click Wireless Network Connections and select Properties. 3. Click Wireless Network Configuration and clear configuration file as shown below. the corresponding wireless 39 11N Wireless User Guide Clear Wireless configuration file under windows 7 1. Right click Network and click Properties. 2. Click Manage wireless networks on the left side of the window. 3. Delete the corresponding configured file in the Manage wireless networks. 40 11N Wireless User Guide Appendix 5 Regulatory Information CE Mark Warning This is a Class B product In a domestic environment,this product may cause radio interference,in which case the user may be required to take adequate measures.This device complies with EU 1999/5/EC. NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be 41 11N Wireless User Guide Consult the dealer or an experienced radio/TV technician for help. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

to which the receiver is connected.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE:(1)The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.(2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable 42

Comments

Related Exhibits

External Photos	ID Label/Location Info	Internal Photos

This product uses the FCC Data API but is not endorsed or certified by the FCC