P2930 SHIELD Remote TempConfidential Users Manual-rev1

 

NVIDIA P2930 SHIELD Remote Table of Contents About Your SHIELD remote .......................................................................................................... 1 using your shield remote ................................................................................................................. 2 Shield Remote ............................................................................................................................. 2 How to Connect Your remote to a shield device ............................................................................ 4 How to Connect Your remote ..................................................................................................... 4 How to Connect Your remote ..................................................................................................... 4 How to Reconnect the remote ......................................................................................................... 5 HOW TO TROUBLESHOOT CONNECTION PROBLEMS ................................................... 5 How to ......................................................................................................................................... 6 How to CHECK the REMOTE BATTERY LEVEL ...................................................................... 6 using your remote ........................................................................................................................... 7 using Voice Search AND COMMANDS ....................................................................................... 9 How to Use Voice Search ........................................................................................................... 9 How to Use Voice Commands .................................................................................................... 9 i ABOUT YOUR SHIELD REMOTE Your NVIDIA SHIELD remote makes it easy to access all of your favorite movies, music, and TV on your SHIELD device, with familiar navigation buttons and integrated voice search capability. Your remote includes the following features:

Navigation D-pad and center Select button Familiar Android Back and Home buttons Integrated microphone for voice search Stereo headphone jack for private listening Volume control*

Bluetooth connectivity for easy control without line of site Internal rechargeable battery and USB charging cable Your SHIELD remote is compatible with all SHIELD devices.

* Your TV or A/V receiver must support HDMI-CEC system volume control in order to the control volume level of those devices. Otherwise, the volume control will mute and unmute only. If headphones are plugged in, SHIELD remote can control the volume level of the headphones. 1 USING YOUR SHIELD REMOTE The SHIELD remote box includes one SHIELD remote, one USB charging cable, one Support Guide, and one Quick Start Guide. SHIELD REMOTE Integrated microphone D-pad 2 SHIELD Remote Select Button Back button Home button Voice search button with indicator light Volume touch control 3 HOW TO CONNECT YOUR REMOTE TO A SHIELD DEVICE The first time you use your SHIELD remote, you must establish a connection with a SHIELD device. This connection is saved for future use. HOW TO CONNECT YOUR REMOTE NOTE If you connect the remote to another SHIELD device, the previous connection is removed. Follow the steps in this procedure to establish the connection again. On your SHIELD device, open the SHIELD accessories app and select Add an accessory. Press the center Select button on your SHIELD remote to turn it on. The indicator light on the Voice search button will flash green to indicate that it is in connection mode. If the indicator light is not flashing, press and hold the Back and Home buttons for 5 seconds. Once connected, your remote will appear in the SHIELD accessories menu along with a status of its battery level. HOW TO CONNECT YOUR REMOTE NOTE For mobile SHIELD devices, make sure that Bluetooth is enabled in Settings before trying to establish a connection. 4 SHIELD Remote HOW TO RECONNECT THE REMOTE Your remote automatically reconnects when the SHIELD device and the remote are turned on and in range. 1. 2. Turn on your SHIELD device. Turn on the remote by picking it up. NOTE You do not need to turn off your remote. It will sleep automatically when inactive. Simply pick it up again to turn it back on. HOW TO TROUBLESHOOT CONNECTION PROBLEMS Verify that the remote has enough charge. Verify that the remotes indicator light is flashing at the same time that the SHIELD device is searching for an accessory. - On the remote, hold the Back and Home buttons for 5 seconds until the indicator light starts flashing. Open the SHIELD accessories app on your SHIELD device to initiate the connection process. Verify that the SHIELD device has Bluetooth turned on. Verify that only one remote or controller in range is attempting to connect to the SHIELD device. The connection process for one accessory must complete before you can connect another accessory. Verify that only one SHIELD device in range is attempting to connect to the remote. Verify that the SHIELD device has the latest system update. If you are still having trouble, please contact customer support. 5 HOW TO HOW TO CHECK THE REMOTE BATTERY LEVEL 1. Connect the remote to a SHIELD device. 2. The remote battery level is shown in the SHIELD accessories app. 6 USING YOUR REMOTE To Wake your SHIELD*

Move through content Select an item Action Press the Select button Use the navigation D-pad to press up, down, left or right Press the Select button Go to the previous screen Press the Back button Go to Home screen Press the Home button Voice search Press the Voice search [mic image here] button then say your command. If youre using an app when you press the Voice search button, youll search within that app. Control volume Swipe the volume touch area to bring up the onscreen volume controls. level Swipe up or swipe down to change the volume. **

Put remote in connection mode Hard reset the remote Press and hold Back and Home buttons together for 5 seconds Press and hold Back and Home and Voice search [mic image here] buttons together for 8 seconds.

* If you TV supports HDMI-CEC, waking your SHIELD device will also turn on your TV and change the TV input to your SHIELD device. If your SHIELD device was in a powered off state, SHIELD remote cannot wake the device. 7

** Your TV or A/V receiver must support HDMI-CEC system volume control in order to the control volume level of those devices. Otherwise, the volume control will mute and unmute only. If headphones are plugged in, SHIELD remote can control the volume level of the headphones. 8 USING VOICE SEARCH AND COMMANDS Your SHIELD remote supports voice search and commands. Use the integrated microphone to search without typing, ask questions and get answers, open apps, and play songs and movies. To start a Google search, initiate voice commands and ask your question. How to Use Voice Search 1. On your remote, press the Voice search [mic image here] button to open Google Now in listening mode. 2. Ask a question or speak your search terms. For example, you can say "When was NVIDIA founded?"

NOTE You do not need to say "OK Google" first. How to Use Voice Commands 1. On your remote, press the Voice search [image here] button to open Google Now in listening mode. 2. Speak your command. To open a game or app, say "Open" and the name of the game or app. To listen to music, say "Listen to" and the name of the song. To watch a movie, say "Watch" and the name of the movie. For more commands, please visit the Google voice command support page. 9 SHIELD Legal HEALTH AND SAFETY INFORMATION Important Safety Information NVIDIA products are designed to operate safely when installed and used according to the product instructions and general safety practices. The guidelines included in this document explain the potential risks associated with equipment operation and provide important safety practices designed to minimize these risks. By carefully following the information contained in this document you can protect yourself from hazards and create a safer environment. This product is designed and tested to meet IEC-60950-1, the Standard for Safety of Information Technology Equipment. This also covers the national implementation of IEC-60950-1 based safety standards around the world e.g. UL-60950-1. These standards reduce the risk of injury from the following hazards:

Electric shock: Hazardous voltage levels contained in parts of the product Fire: Overload, temperature, material flammability Mechanical: Sharp edges, moving parts, instability Energy: Circuits with high energy levels (240 volt-amps) or potential as burn hazards Heath: Accessible parts of the product at high temperatures Chemical: Chemical fumes and vapors Radiation: Noise, ionizing, laser, ultrasonic waves Retain and follow all product safety and operating instructions. Always refer to the documentation supplied with your equipment. Observe all warnings on the product and in the operating instructions. Read all safety information below and operating instructions before using the SHIELD to avoid injury. WARNING: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK OR OTHER INJURY OR DAMAGE. ELECTRICAL EQUIPMENT CAN BE HAZARDOUS IF MISUSED. OPERATION OF THIS PRODUCT, OR SIMILAR PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE INTERIOR OF ANY ELECTRICAL PRODUCT AND DO NOT PERMIT THEM TO HANDLE ANY CABLES. To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the safety labels included on the equipment. This symbol in conjunction with any of the following symbols indicates the presence of a potential hazard. The potential for injury exists if warnings are not observed. Consult your documentation for specific details. This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified personnel. WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel. This symbol indicates the presence of electric shock hazards. The area contains no user or field serviceable parts. Do not open for any reason. 10 SHIELD Remote To reduce the risk of electric shock, personal injury, or damage to the equipment, observe the following precautions:

Follow all cautions and instructions marked on the equipment. Do not bend, drop, crush, puncture, incinerate, or push objects into openings of the device. Do not connect or disconnect any cables or perform maintenance or reconfiguration of this product during an electrical storm. Do not use the SHIELD in rain or near sink, or other wet locations. Take care not to spill any food or liquid into the device. In case the SHIELD device gets wet, unplug all cables and turn off before cleaning, and allow it to dry thoroughly before turning it on again. Do not expose the SHIELD to any gas which is not normally contained in the atmosphere. It may cause mis-

operation or defects. Never turn on any equipment when there is evidence of fire, water, or structural damage. Place the product away from radiators, heat registers, stoves, amplifiers, or other appliances that produce heat. Never force a connector into a port. Check for obstructions on the port. If the connector and port don't join with reasonable ease, they probably don't match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Operate the AC adapter in a ventilated area. When you are using the NVIDIA SHIELD, it is normal for the system and/or AC power adapter to get warm. Do not use conductive tools that could bridge live parts. Do not make mechanical or electrical modifications to the equipment. Never attempt to reconnect the SHIELD yourself. This device does not contain any user-serviceable parts. Do not attempt to open, disassemble, or remove the battery. You run the risk of electric shock.. Operate the SHIELD in a place where the temperature is always between 5 and 30C (41 to 86F). Store the SHIELD in a place where the temperature is always betwen 0 and 35C (32 to 95F) with relative humidity of 70% or lower. When taking the device from a low temperature condition, allow the device to reach room temperature before turning the power on. Use this product only with approved equipment and/or accessories If the product sustains damage requiring service, disconnect the product from the AC electrical outlet and refer servicing to an NVIDIA authorized service provider. Proposition 65 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (California law requires this warning be provided to California customers. COMPLIANCE 11 The SHIELD Remote compliant with the regulations listed in this section. UNITED STATES Federal Communications Commission (FCC) FCC ID: VOB-P2930 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Warning: The FCC requires that you be notified that any changes or modifications to this device not expressly approved by the manufacturer could void the users authority to operate the equipment. RF Radiation Exposure Statement:

SHIELD Remote has been tested and complies with FCC RF radiation exposure limits set forth for an uncontrolled environment when used with the NVIDIA accessories supplied or designated for this product. Underwriters Laboratories (UL) I.T.E E204896 CANADA Industry Canada (IC) IC: 7361A-P2930 12 SHIELD Remote CAN ICES-3(B)/NMB-3(B) This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Radiation Exposure Statement:

SHIELD Remote has been tested and complies with IC RSS 102 RF radiation exposure limits set forth for an uncontrolled environment when used with the NVIDIA accessories supplied or designated for this product. During testing, the SHIELD Tablet was placed in positions that simulate use against the body. The use of any other accessories may not ensure compliance with IC RSS 102RF exposure guidelines. Dclaration d'exposition aux radiations:

SHIELD Remote a ete testee conformemment aux normes dexposition demission RF de la IC RSS 102 pour un environement non controle lors dutilisation avec les accessoires fournis or recommendes par NVIDIA. Pendant les tests, la tablette SHIELD a ete positionnee afin de simule la presence du corps humain. Lutilisation daccessoires autres que ceux recommendes par NVIDIA ne guarantis pas la compatibilite avec les normes demission RF de la IC RSS 102. EUROPEAN UNION European Conformity; Conformit Europenne (CE) This device bears the CE mark in accordance with Directive 1999/5/EC This device complies with the following Directives:

R&TTE Directive for radio equipment Low Voltage Directive for electrical safety RoHS Directive for hazardous substances A copy of the Declaration of Conformity to the essential requirements may be obtained directly from NVIDIA GmbH (Floessergasse 2, 81369 Munich, Germany). 13 A LIRE AVANT TOUTE UTILISATION D'UN JEU VIDEO PAR VOUS-MEME OU PAR VOTRE ENFANT I. - Prcautions prendre dans tous les cas pour l'utilisation d'un jeu vido. Evitez de jouer si vous tes fatigu ou si vous manquez de sommeil. Assurez-vous que vous jouez dans une pice bien claire en modrant la luminosit de votre cran. Lorsque vous utilisez un jeu vido susceptible d'tre connect un cran, jouez bonne distance de cet cran de tlvision et aussi loin que le permet le cordon de raccordement. En cours d'utilisation, faites des pauses de dix quinze minutes toutes les heures. II. - Avertissement sur l'pilepsie. Certaines personnes sont susceptibles de faire des crises d'pilepsie comportant, le cas chant, des pertes de conscience la vue, notamment, de certains types de stimulations lumineuses fortes: succession rapide d'images ou rptition de figures gomtriques simples, d'clairs ou d'explosions. Ces personnes s'exposent des crises lorsqu'elles jouent certains jeux vido comportant de telles stimulations, alors mme qu'elles n'ont pas d'antcdent mdical ou n'ont jamais t sujettes elles-mmes des crises d'pilepsie. Si vous-mme ou un membre de votre famille avez dj prsent des symptmes lis l'pilepsie (crise ou perte de conscience) en prsence de stimulations lumineuses, consultez votre mdecin avant toute utilisation. Les parents se doivent galement d'tre particulirement attentifs leurs enfants lorsqu'ils jouent avec des jeux vido. Si vous-mme ou votre enfant prsentez un des symptmes suivants :

vertige, trouble de la vision, contraction des yeux ou des muscles, trouble de l'orientation, mouvement involontaire ou convulsion, perte momentane de conscience, il faut cesser immdiatement de jouer et consulter un mdecin. AUSTRALIA AND NEW ZEALAND Australian Communications and Media Authority This product meets the applicable EMC requirements for Class B, I.T.E equipment and applicable radio equipment requirements JAPAN Voluntary Control Council for Interference (VCCI) 14 SHIELD Remote Translation:

This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Radio/ Telecommunications Certification CHINA State Radio Regulation of China (SRRC) CMIIT ID: YYYYxxxxxx China RoHS Material Content Declaration

(As required by Chinas Management Methods for Controlling Pollution by Electronic Information Products) Table of Toxic and Hazardous Substances/Elements and their Content Part Name Lead

(Pb) Main PCB X 0.005g Daughter PCB Display Speakers Battery Rear Camera Front Camera Front Cover Rear cover Mid chassis O O O O O O O O O Toxic and Hazardous Substances and Elements Mercury Cadmium Hexavalent Chromium Polybrominated Biphenyls Polybrominated Diphenyl

(Hg)

(Cd)

(Cr(VI))

(PBB) ethers (PBDE) O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572-2011. 15 X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572-2011. All parts named in this table with an X are in compliance with the European Unions RoHS Legislation. 0.005g of lead as required to make a viable connection between Silicon Die and Substrate as allowed per RoHS Exemption 15 Note: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity. X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O

(PBB)

(Hg)

(Pb)

(Cd)

(Cr(VI)) O GB/T 26572-2011 GB/T 26572-2011 RoHS RoHS X X X O O O O O O O O O O O O O O O O O O O O O O

(PBDE) O O O O O O O 16 SHIELD Remote SOUTH KOREA Radio Research Agency (RRA) Korean Agency for Technology and Standards (KATS) MSIP-CRM-NVA-P2930 B

(

TAIWAN

) Translation:

Class B Equipment (For Home Use Broadcasting & Communication Equipment) This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas.

)

(B

.

, National Communications Commission Wireless Planning & Coordination Wing (WPC) ETA CERTIFICATION NO: XXXX/YYYY/WROL RUSSIA/KAZAKHSTAN/BELARUS INDIA 17 EurAsian Customs Union This device complies with the technical regulations of the Customs Union (CU TR) This device complies with the rules set forth by Federal Agency of Communications and the Ministry of Communications and Mass Media Federal Security Service notification has been filed. SINGAPORE Infocomm Development Authority of Singapore (IDA) Complies with IDA Standards

[Dealer License #]

BLUETOOTH Bluetooth v4.1 Declaration ID: Dxxxxxx NOTICES AND TRADEMARKS 18 SHIELD Remote The information provided in this document is believed to be accurate and reliable as of the date provided. However, NVIDIA Corporation (NVIDIA) does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information. NVIDIA shall have no liability for the consequences or use of such information or for any infringement of patents or other rights of third parties that may result from its use. This publication supersedes and replaces all other specifications for the product that may have been previously supplied. NVIDIA reserves the right to make corrections, modifications, enhancements, improvements, and other changes to this specification, at any time and/or to discontinue any product or service without notice. Customer should obtain the latest relevant specification before placing orders and should verify that such information is current and complete. NVIDIA products are sold subject to the NVIDIA standard terms and conditions of sale supplied at the time of order acknowledgment, unless otherwise agreed in an individual sales agreement signed by authorized representatives of NVIDIA and customer. NVIDIA hereby expressly objects to applying any customer general terms and conditions with regard to the purchase of the NVIDIA product referenced in this specification. NVIDIA products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of the NVIDIA product can reasonably be expected to result in personal injury, death or property or environmental damage. NVIDIA accepts no liability for inclusion and/or use of NVIDIA products in such equipment or applications and therefore such inclusion and/or use is at customers own risk. NVIDIA makes no representation or warranty that products based on these specifications will be suitable for any specified use without further testing or modification. Testing of all parameters of each product is not necessarily performed by NVIDIA. It is customers sole responsibility to ensure the product is suitable and fit for the application planned by customer and to do the necessary testing for the application in order to avoid a default of the application or the product. Weaknesses in customers product designs may affect the quality and reliability of the NVIDIA product and may result in additional or different conditions and/or requirements beyond those contained in this specification. NVIDIA does not accept any liability related to any default, damage, costs or problem which may be based on or attributable to: (i) the use of the NVIDIA product in any manner that is contrary to this specification, or (ii) customer product designs. No license, either expressed or implied, is granted under any NVIDIA patent right, copyright, or other NVIDIA intellectual property right under this specification. Information published by NVIDIA regarding third-party products or services does not constitute a license from NVIDIA to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property rights of the third party, or a license from NVIDIA under the patents or other intellectual property rights of NVIDIA. Reproduction of information in this specification is permissible only if reproduction is approved by NVIDIA in writing, is reproduced without alteration, and is accompanied by all associated conditions, limitations, and notices. ALL NVIDIA DESIGN SPECIFICATIONS, REFERENCE BOARDS, FILES, DRAWINGS, DIAGNOSTICS, LISTS, AND OTHER DOCUMENTS (TOGETHER AND SEPARATELY, MATERIALS) ARE BEING PROVIDED AS IS. NVIDIA MAKES NO WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE WITH RESPECT TO THE MATERIALS, AND EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE. Notwithstanding any damages that customer might incur for any reason whatsoever, NVIDIAs aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the NVIDIA terms and conditions of sale for the product. HDMI HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ARM ARM, AMBA and ARM Powered are registered trademarks of ARM Limited. Cortex, MPCore and Mali are trademarks of ARM Limited. All other brands or product names are the property of their respective holders. ARM is used to represent ARM Holdings plc; its operating company ARM Limited; and the regional subsidiaries ARM Inc.; ARM KK; ARM Korea Limited.; ARM Taiwan Limited; ARM France SAS; ARM Consulting (Shanghai) Co. Ltd.; ARM Germany GmbH; ARM Embedded Technologies Pvt. Ltd.; ARM Norway, AS and ARM Sweden AB. OpenCL OpenCL is a trademark of Apple Inc. used under license to the Khronos Group Inc. Trademarks NVIDIA, the NVIDIA logo, GeForce, and SHIELD are trademarks and/or registered trademarks of NVIDIA Corporation in the U.S. and other countries. Other company and product names may be trademarks of the respective companies with which they are associated. Google, Android, and Gmail are trademarks and/or registered trademarks of Google Inc. 19 The Bluetooth word, mark, and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. Wi-Fi CERTIFIED and Wi-Fi CERTIFIED Miracast are registered marks of the Wi-Fi Alliance. Steam is a trademark of Valve. Other trademarks and trade names are those of their respective owners. Copyright 2016 NVIDIA Corporation. All rights reserved. 20