RF2517 REMOTE CONTROL Users Manual

 

Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 1 of 7 Product Manual of RF2517 Design & Change Record Date Version Issue Description 2018-7-22 V1.0 First draft Approval Sign Post Author Jarek 1/7 Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 2 of 7 Figure 4 Remote RF2517 2/7 Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 3 of 7 FCC ID: PCU-CB3332 IC21319-CB3332 FCC ID: PCU-RF2517 IC21319-RF2517 1. Test Item 2.1Pairing function 1. Power on the control box or double-click the pairing button of control box, the blue light 3/7 Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 4 of 7 of the control box turns on, and the control box enters pairing mode;

2. Press and hold the pairing combination button of remote

(For RF.25.15 series, press and hold flat + stop for 4s, the remote enters pairing status,

+

the backlight of the remote starts flashing) Until the backlight of remote is off and the blue light of the control box is off, the pairing is successful (if the pairing fails, repeat steps 1-2);

2.2 Function of Head up& down buttons Press and hold Head upbutton of remote, telecontrol the control box to execute head actuator up, stop when released;

Press and hold Head downbutton of remote, telecontrol the control box to execute head actuator down, stop when released;

2.4 Function of foot up& down buttons Press and hold Foot up button of remote, telecontrol the control box to execute foot actuator up, stop when released;

Press and hold Footdownbutton of remote, telecontrol the control box to execute foot actuator down, stop when released;

2.5 Function of Lumbar up& down buttons Press and hold Lumbar up button of remote, telecontrol the control box to execute Lumbar actuator up, stop when released;

Press and hold Lumbardownbutton of remote, telecontrol the control box to execute Lumbar actuator down, stop when released;

2.6 Function of Flat button RF2517series Click FLAT button, telecontrol the control box to execute actuators togo flat, during the movement, stop when click any button;

4/7 Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 5 of 7 2.7 Function of Incline button Click Incline button, telecontrol the control box to executeactuators to move to Incline position, during the movement, stop when click any button;

Press and hold Program + Inclinebutton for 2.5s, the backlight of remote flashes, the control box recored the current position as Incline position;

2.8 Function of Lounge button Click Lounge button, telecontrol the control box to executeactuators to move to Lounge position, during the movement, stop when click any button;

Press and hold Program + Loungebutton for 2.5s, the backlight of remote flashes, the control box recored the current position as Lounge position;

2.9 Function of AntiSnore button Click AntiSnore button, telecontrol the control box to executeactuators to move to AntiSnore position, during the movement, stop when click any button;

2.10 Function of ZeroGravity button Click ZeroGravity button, telecontrol the control box to executeactuators to move to ZeroGravity position, during the movement, stop when click any button;

Press and hold Program + ZeroGravitybutton for 2.5s, the backlight of remote flashes, the control box recored the current position as ZeroGravity position;

2.11 Test of restore memory position to factory settings

+

5/7 Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 6 of 7 RF2517series Press and hold Program + Flat for 2.5s, the backlight of remotel flashes, and the control box restore the memory positions such as Incline position and ZeroGravity position to the factory setting position;

2.12 Function of under bed light button(the back side) Clickunderbedlighton/offbutton, telecontrol the control box to switchtheon/off statusofunderbedlight;

2.13 Function of Program button Program+memory position, press and hold for 2.5s, set the current position as memory position;

Program+flat,pressandholdfor2.5s,restorememorypositiontofactorysettings;

2.14 Massage intensity adjustment function Click Massage Up button, telecontrol the control box to open the massage intensity to level 3, and then click, it will increase step by step, the maximum is level 3;

Click Massage down button, telecontrol the control box to open the massage intensity to level 3, and then click, itwill decrease step by step, the miniimum is level 2;

Massage level duty cycle Level1 Level2 Level3 Level4 Level5 Level6 Level7 Level8 Nouse 30%

40%

50%

60%

70%

80%

90%

2.15 Massage mode adjustment test Click massage wave button, telecontrol the control box to open the massage to mode 1, the intensity has 4 levels;

then click,it cycles among mode 1-2-3-1; the corresponding indicator will light up;

6/7 Issue DepartmentRD Department Product Manual Date Author 2019-7-22 Jarek Product Manual of RF2517 Version 1.0 Page 7 of 7 1. FCC Warning interference, and (2) ISED RSS Warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. This device complies with Innovation,Science and Economic Development Canada licenceexemptRSS standard(s). Operation is subject to the following two conditions: (1) this devicemay not cause interference, includinginterference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi,mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. Le matriel est conforme aux limites de dose d'exposition aux rayonnements noncs pour fac un autre environnement.ce dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf. this device must accept any 7/7