| submitted | available | document details (if available) | source link |
|---|---|---|---|
| September 12 2016 | Operating Instructions (English) Panasonic System Networks Co., Ltd. Antenna House PDF Output Library 2.6.0 (Windows) |
| various | User Manual | Users Manual | 2.21 MiB | September 12 2016 |
Operating Instructions Model No. Cordless Telephone with Bluetooth and Digital Answering Machine KX-TGD560 KX-TGD562 KX-TGD563 KX-TG743SK KX-TGD564 KX-TG744SK Model shown is KX-TGD560. Before initial use, see Getting Started on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 72. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 1 2016/10/14 17:58:07 Caller ID Service Using Caller ID service ...............................43 Caller list ....................................................43 Using Bluetooth Devices Copying phonebook from a cellular phone
(phonebook transfer) ..................................45 Link to Cell app ..........................................46 Text message (SMS) alert .........................47 Alert settings for your DECT phone ...........47 Remote voice assist ...................................48 Using a Bluetooth headset (optional) .........48 Answering System for Landline Answering system for landline ...................51 Turning the answering system on/off .........51 Greeting message ......................................51 Listening to messages ...............................52 Remote operation .......................................53 Answering system settings .........................54 Useful Information Voicemail service for landline .....................56 Wall mounting ............................................57 Error messages ..........................................60 Troubleshooting .........................................61 FCC and other information .........................69 Gua Rpida Espaola Gua Rpida Espaola ...............................72 Appendix Customer services .....................................82 Limited Warranty (ONLY FOR U.S.A.) .......83 Index Index...........................................................85 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................6 Important Information For your safety .............................................7 Important safety instructions ........................8 For best performance ...................................8 Other information .........................................9 Specifications .............................................10 Getting Started Setting up ...................................................11 Controls ......................................................13 Display icons/Indicators .............................14 Language settings ......................................16 Date and time .............................................16 Recording your greeting message .............16 Other settings .............................................16 Link to Cell Link to cell feature ......................................17 Pairing a cellular phone ..............................17 Link to cell settings .....................................18 Making/Answering Calls Making cellular calls ...................................21 Making landline calls ..................................21 Answering calls ..........................................22 Useful features during a call .......................22 Intercom .....................................................25 Call Block Call block ....................................................26 Storing unwanted callers ............................26 Phonebook Phonebook .................................................28 Speed dial ..................................................30 Programming Menu list .....................................................32 Alarm ..........................................................40 Silent mode ................................................40 Other programming ....................................41 Registering a unit .......................................41 2 TGD56x(en)_1014_ver003.pdf 2 2016/10/14 17:58:07 Introduction Base unit Part No. KX-TGD560 KX-TGD560 KX-TGD560 KX-TGD560 KX-TGD560 KX-TGD560 Handset Part No. KX-TGDA51 KX-TGDA51 KX-TGDA51 KX-TGDA51 KX-TGDA51 KX-TGDA51 Quantity 1 2 3 3 4 4 Model composition Series Model No. KX-TGD560 series KX-TGD560 KX-TGD562 KX-TGD563 KX-TG743SK KX-TGD564 KX-TG744SK Accessory information Supplied accessories No. Accessory item/
Part number A AC adaptor/PNLV226-0X B Telephone line cord*1 C Wall mounting adaptor*2 D Rechargeable batteries*3 E Handset cover*4, *5 F Charger*6 Quantity KX-TGD560 KX-TGD562 KX-TGD563 KX-TG743SK KX-TGD564 KX-TG744SK 1 1 1 2 1 1 1 1 4 2 1 1 1 1 6 3 2 1 1 1 8 4 3
*1 PQJA10075Y (Black cord), PQJA10075Z (Transparent cord)
*2 PNKL1044Y2 (Black), PNKL1044Y1 (White)
*3 See page 4 for replacement battery information.
*4 The handset cover comes attached to the handset.
*5 PNYNTGDA50BR (Black), PNYNTGDA50WR (White)
*6 PNLC1077ZB (Black), PNLC1077ZW (White) A B C D E For assistance, please visit http://shop.panasonic.com/support 3 TGD56x(en)_1014_ver003.pdf 3 2016/10/14 17:58:07 Introduction F Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 82). Accessory item Rechargeable batteries Range extender Key detector Model number/Specifications HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type:
Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-TGA405*2 KX-TGA20*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:
http://www.panasonic.com/tga20 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system Handset (optional): KX-TGDA51 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. 4 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 4 2016/10/14 17:58:07 Bluetooth devices You can expand your phone system by pairing the following units to a single base unit. Introduction Your Bluetooth cellular phone*1: 2 max.
(for cellular calls: page 17) Your Bluetooth headset*1: 1 max.
(for a wireless hands-free conversation: page 48)
*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone Trademarks R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license. R iPhone is a registered trademark of Apple Inc. R Android is a trademark of Google Inc. R Gmail and Google Calendar are trademarks of Google Inc. R Facebook is trademark of Facebook, Inc. R Twitter is trademark of Twitter Inc. R Instagram is trademark of Instagram, Inc. R BlackBerry is owned by Research In Motion Limited and is registered in the United States and may be pending or registered in other countries. Panasonic is not endorsed, sponsored, affiliated with or otherwise authorized by Research In Motion Limited. R Siri is a registered trademark of Apple Inc. R Google Now is a trademark of Google Inc. R S Voice is a registered mark of Samsung Electronics Co., Ltd. R All other trademarks identified herein are the property of their respective owners. For assistance, please visit http://shop.panasonic.com/support 5 TGD56x(en)_1014_ver003.pdf 5 2016/10/14 17:58:07 Introduction Graphical symbols for use on equipment and their descriptions Symbol Symbol Explanation Alternating current (A.C.) Explanation Class P equipment
(equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) ON (power) Direct current (D.C.) Protective earth OFF (power) Protective bonding earth Stand-by (power) Functional earth For indoor use only ON/OFF (power;
push-push) Caution, risk of electric shock 6 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 6 2016/10/14 17:58:07 For your safety To prevent severe injury and loss of life/
property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. For assistance, please visit http://shop.panasonic.com/support 7 TGD56x(en)_1014_ver003.pdf 7 2016/10/14 17:58:07 Important Information R This product is unable to make calls when:
the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:
at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. 8 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 8 2016/10/14 17:58:08 Important Information Notice for product disposal, transfer, or return R This product can store your private/
confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heating devices, cooking appliances, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For assistance, please visit http://shop.panasonic.com/support 9 TGD56x(en)_1014_ver003.pdf 9 2016/10/14 17:58:08 Important Information Specifications R Standard:
DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range:
1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power:
115 mW (max.) R Power source:
120 V AC, 60 Hz R Power consumption:
Base unit:
Standby: Approx. 1.2 W Maximum: Approx. 4.5 W Charger:
Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:
0 C 40 C (32 F 104 F), 20 % 80 %
relative air humidity (dry) 10 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 10 2016/10/14 17:58:08 Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 19). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack
(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Getting Started n Charger Connect the AC adaptor to the power outlet. Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (
,
). Note:
R Use only the supplied Panasonic AC adaptor PNLV226. For assistance, please visit http://shop.panasonic.com/support 11 R Follow the directions on the display to set up the unit. TGD56x(en)_1014_ver003.pdf 11 2016/10/14 17:58:08 132431114231 Getting Started Removing the battery Battery charging Charge for about 7 hours. R Confirm Charging is displayed (
R When the batteries are fully charged, Fully charged is displayed.
). Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected. Power failure R The unit cannot be used to make or receive calls during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 8. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. 12 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 12 2016/10/14 17:58:08 1211 Getting Started Controls Handset Icon Battery level Empty Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 10 hours max.*1 5 days max.*1
*1 If eco mode is on. Note:
R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. However, during a cellular call, is not displayed even though this feature is activated. R Eco mode is turned off when the clarity booster is activated (page 23).
) Ringer off Speaker N (TALK) M Dial keypad
*: Temporary tone dialing 0: (
MZN (SP-PHONE: Speakerphone) MCALL BLOCKN Microphone Receiver Display MOFFN (
) For assistance, please visit http://shop.panasonic.com/support 13 TGD56x(en)_1014_ver003.pdf 13 2016/10/14 17:58:08 ABAACBHIJGKDEF Getting Started N (Assist) MFLASHN M R You can use the handset to operate the voice recognition feature of your cellular phone by pressing M
(page 48). N Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Base unit Charge contacts Speaker Message counter CELL 1 indicator CELL 2 indicator HEADSET indicator MjN/MkN (VOL.: Volume up/down) MERASEN MCELL 2N (For pairing) N (Skip) M N (PLAY/STOP) M Message indicator (
) MANSWER ON/OFFN MCELL 1N (For pairing) M MLOCATORN R You can locate a misplaced handset N (Repeat) by pressing MLOCATORN. Display icons/Indicators Handset display items Item Z Meaning Within base unit range Out of base unit range The landline is in use. R When flashing:
The call is on hold. R When flashing rapidly: An incoming call is now being received. A cellular line is in use.*1 R When flashing:
The cellular call is on hold. R When flashing rapidly:
A cellular call is being received. Eco mode is on.*2 (page 13) A cellular phone is connected.*1 Ready to make/
receive cellular calls. R When turned off:
A cellular phone is not connected to the base unit. (page 19) A cellular call is in progress on that line. The cellular line is selected for the setting. Speakerphone is on.
(page 21) Ringer volume is off.*3
(page 22, 34, 36) Silent mode is on. (page 40) 14 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 14 2016/10/14 17:58:08 BCDEFAGHIJKL Item Meaning Call sharing mode is off.
(page 38) Alarm is on. (page 40) Handset number Battery level Blocked call (page 26) Clarity booster is on.*2
(page 23) Answering system is being used by another unit. Someone is using the corresponding line. In use Cell1 in use Cell2 in use C1&C2 in use Line in use
*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.
*2 During a cellular call, the item is not displayed even though the feature is activated.
*3 Corresponding lines (1, 2: cellular line, L:
landline) are indicated next to the item. If all lines are turned off, no line is indicated. Base unit display item Item Meaning Greeting only is selected. Caller messages are not recorded. (page 55) CELL indicators on the base unit The CELL indicators show each cellular line status. Status On Meaning A cellular phone is connected. Ready to make/receive cellular calls. Status Flashing Getting Started Meaning The cellular line is in use. Phonebook entries are being copied from a cellular phone (page 45). The base unit is searching for the paired cellular phone. The base unit is pairing a cellular phone. A cellular call is on hold. The remote voice assist feature is in use
(page 48). Flashing rapidly Light off A cellular call is being received. A cellular phone is not paired to the base unit. A cellular phone is not connected to the base unit
(page 19). Bluetooth HEADSET indicator on the base unit The HEADSET indicator shows the Bluetooth headset status. Status On Flashing Flashing rapidly Light off Meaning A Bluetooth headset is connected to the base unit. Ready to use it. A Bluetooth headset is in use. The base unit is searching for the paired Bluetooth headset. The base unit is pairing a headset. A landline call is being received. A Bluetooth headset is not paired to the base unit. The Bluetooth headset is not connected to the base unit. For assistance, please visit http://shop.panasonic.com/support 15 TGD56x(en)_1014_ver003.pdf 15 2016/10/14 17:58:08 Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 51 for details. 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN Getting Started Language settings Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN Voice announcement language You can select the language used for the following features. Answering system guidance Talking Caller ID Application (App) alert announcement Text message (SMS) alert announcement 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2017 07 12 17 3 MOKN 4 Enter the current hour and minute
(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:
R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. 16 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 16 2016/10/14 17:58:08 Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to:
use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. talk on cellular calls even if your cellular phone is in your pocket or bag. enjoy cordless cellular calls even if your cellular phone plugged in and charging. Important:
R Your cellular phone must support the Hands Free Profile (HFP) specification. R You may pair 2 cellular phones and 1 Bluetooth headset. R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the Bluetooth headset and 1 cellular line*1). R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
*1 You cannot use a Bluetooth headset to talk on a cellular line. Pairing a cellular phone Important:
R For more details and the list of compatible cellular phones, please visit our Web site:
http://shop.panasonic.com/bluetooth-phone R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone. Link to Cell 1 Base unit:
Press and hold MCELL 1N or MCELL 2N for about 5 seconds. R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 0000). to confirm the passkey, tap MOKN or otherwise to accept the pairing request. 3 Base unit:
R If your cellular phone prompts you Wait until a long beep sounds. R It may take more than 10 seconds to complete pairing. R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. Note:
R If the cellular phone has already paired to the base unit, it is overwritten. R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions. R Make sure you cancel your cellular R The default setting for the alert feature is phones current pairing if you want to pair it to the other line (page 17). On, so when you pair your cellular phone to the base unit, this feature may be activated (page 47). (This depends on the version and type of cellular phone you are using.) Unpairing a cellular phone You can cancel the pairing of a cellular phone that is stored in the base unit. For assistance, please visit http://shop.panasonic.com/support 17 TGD56x(en)_1014_ver003.pdf 17 2016/10/14 17:58:08 Link to Cell 1 For CELL 1: MMENUN#6111 For CELL 2: MMENUN#6112 2 MbN: Yes a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When All is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or All. a MSAVEN a MOFFN Note:
R When you select a specific handset to receive calls for a cellular line other handsets cannot answer the calls. R When you change to All from another setting, the base unit ringer volume also returns to the lowest level even if the ringer volume was changed. R The units selected with this setting have the alert feature (page 47) applied to them. Ring as cell mode Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone. The following settings are available:
Off: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 36). On (with Talking CID) (default):
The handset and base unit use your cellular phones ringer tone. Caller information is announced even if the Talking Caller ID is turned off. On (without Talking CID): The handset and base unit use your cellular phones ringer tone. Caller information is not announced even if the Talking Caller ID is turned on. Important:
R To use this feature, your cellular phone must support Bluetooth in-band ringtone. Refer to your cellular phones operating instructions. 1 For CELL 1: MMENUN#6141 For CELL 2: MMENUN#6142 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:
R The units use the preset ringer tones instead of your cellular phones ringer tone when a cellular call is being received if:
your cellular phone is in silent mode
(depending on your cellular phone). the base unit is in use. 2 handsets are sharing a landline call. R If your cellular phone is in silent mode with On (with Talking CID) set, the unit announces caller information even when Talking Caller ID is turned off (page 36). To use the handset ringer tone instead of your cellular phones ringer tone Select Off in step 2, Ring as cell mode, page 18. To change the handset ringer tone for a cellular line, see page 34. Auto connection to the Bluetooth devices (cellular phones) After pairing, your Bluetooth devices are connected to the base unit. If you move the Bluetooth devices out of base unit range, the Bluetooth devices are disconnected from the base unit. This feature allows the base unit to try to reconnect the Bluetooth devices at regular intervals when it returns within base unit range. You can set the interval. The default setting is 1 min. 18 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 18 2016/10/14 17:58:08 Important:
R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on. R Some cellular phones lose connection after usage, please check the specifications of your cellular phone for more details. 1 MMENUN#632 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:
R Some cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select Off in step 2. Check the specifications of your cellular phone. Connecting/disconnecting the cellular phone manually If you will not be using the paired cellular phones link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit. Note:
R After you disconnect a paired cellular phone from the base unit manually, it will automatically be connected to the base unit in 30 minutes. If you do not use the link to cell feature anymore, unpair the cellular phone (page 18). R A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary. 1 To connect/disconnect:
For CELL 1: MMENUN#6251 For CELL 2: MMENUN#6252 R A long beep sounds. 2 MOFFN Link to Cell Cellular line only mode (If you do not use the landline) If you do not use the landline, we recommend setting the unit to the cellular line only mode. The default setting is Off. Important:
R If you turn on the Cell line only mode, disconnect the telephone line cord from the base unit. Otherwise the Cell line only mode cannot be activated. 1 MMENUN#157 2 To turn on:
MbN: On a MSELECTN a MbN: Yes a MSELECTN To turn off:
MbN: Off a MSELECTN Note:
R Once you set this mode, you can press N or MZN instead of MCELLN M
(page 21) to make cellular calls for the handset. R Once you set this mode, the following features cannot be used:
Landline features (page 38) Answering system (page 51) Messages cannot be received. Voicemail features (page 56) R After this mode is turned on or off, the base unit reboots. Bluetooth connections from cellular phones or Bluetooth headset are disconnected. If the auto connection is turned on (page 18), the cellular phones are reconnected. will be displayed on the handset momentarily. The handset can be used once is displayed. When you use the landline again Before connecting the telephone line to the base unit, select Off in step 2, Cellular line only mode (If you do not use the landline), page 19. For assistance, please visit http://shop.panasonic.com/support 19 TGD56x(en)_1014_ver003.pdf 19 2016/10/14 17:58:08 1 MMENUN#619 R If the unit prompts you to enter the old PIN (when the default has been changed), enter the current 4-digit PIN. 2 Enter the new 4-digit PIN. a MOKN 3 Enter the new 4-digit PIN again. a MSAVEN a MOFFN Link to Cell Cellular line selection This feature determines which cellular line is selected to make cellular calls when:
you press MCELLN on the handset. you press M N or MZN on the handset while the cellular line only mode is turned on. The following settings are available:
Manual (default): You can select the desired cellular line when making a call. Cellphone 1*1: CELL 1 is selected. Cellphone 2*1: CELL 2 is selected. 1 MMENUN#634 2 MbN: Select the desired setting. a
*1 After the Bluetooth device is paired, the MSAVEN a MOFFN device name is displayed. Storing your area code (for dialing only a 7-digit phone number to make a local call) You need to add your area code when making cellular calls to a phone number in your area. Once you store your area code, it is automatically added to the beginning of the 7-digit phone number when making cellular calls. 1 MMENUN#633 2 Enter the 3-digit area code. 3 MSAVEN a MOFFN R To correct a digit, press MCLEARN. Changing the Bluetooth PIN
(Personal Identification Number) The PIN is used to pair cellular phones to the base unit. The default PIN is 0000. To prevent unauthorized access to this product, we recommend that you change the PIN, and keep it confidential. Important:
R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, see page 68. 20 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 20 2016/10/14 17:58:08 Making cellular calls Important:
R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R Before making calls, confirm that the on the handset is corresponding displayed (page 14).
*1 You cannot use a Bluetooth headset to talk on a cellular line. 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). Go to step 4. 3 MbN: Select the desired cellular phone. a 4 When you finish talking, press MOFFN or MSELECTN place the handset on the base unit or charger. Note:
R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/
M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Adjusting the receiver or speaker volume Press MDN or MCN repeatedly while talking. Note:
R The receiver or speaker volume you set is kept for each line (landline and cellular lines). Making/Answering Calls Making a cellular call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 4 MbN: Select the desired cellular phone. a MSELECTN Erasing a number in the redial list n When a cellular phone is paired:
MMENUN 1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN 5 MOFFN n When a cellular phone is not paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN a MOFFN MERASEN Making landline calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M N to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:
R To switch to the speaker, press MZN. For assistance, please visit http://shop.panasonic.com/support 21 TGD56x(en)_1014_ver003.pdf 21 2016/10/14 17:58:08 Making/Answering Calls To switch back to the receiver, press MZN/
M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 M N Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 30). Example: If you need to dial the line access number 9 when making outside calls with a PBX:
1 9 a MDN (Pause) 2 Dial the phone number. a M Note:
R A 3.5 second pause is inserted each time N MDN (Pause) is pressed. Adjusting the ringer volume Handset Press MDN or MCN repeatedly to select the desired volume while ringing. Base unit n While the base unit is ringing for an incoming call:
Press MjN or MkN repeatedly to select the desired volume. n While the base unit is in standby mode:
Press MjN or MkN repeatedly to select the desired volume for landline call. R To turn the ringer off, press and hold MkN until the unit beeps. Note for handset and base unit:
R You can adjust the ringer volume for cellular call and landline call by programming (page 34, 36). R The ringer volume you set is kept for each line (landline and cellular lines). One-touch ringer off for the handset Press and hold 0 until the unit beeps to turn the ringer off. While the ringer is turned off, the handset will not ring for cellular calls or for landline calls. R You can turn the ringer on again by pressing and holding 0 until the unit beeps. Answering calls 1 Lift the handset and then press M N or MZN when the unit rings. R To answer a cellular call, you can also press MCELLN. 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 37). Temporary handset ringer off: You can turn the ringer off temporarily by pressing M N (left soft key). 22 Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold on the cellular line:
Press MCELLN.*1 R Another handset user can take the call by pressing MCELLN.*1
*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 22 2016/10/14 17:58:09 Making/Answering Calls Temporary tone dialing for landline calls (for rotary/pulse service users) Press * before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed. However, during a cellular call, is not displayed even though the feature is activated. Call share You can join an existing outside call. n While another unit is on a cellular call:
1 To join the conversation, press MCELLN. R You can join the conversation in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 2 MbN: Select the corresponding cellular phone. a MSELECTN n While another unit is on a landline call:
To join the conversation, press M N. Note:
R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 38). To release hold on the landline:
Press M R Another handset user can take the call N. by pressing M N. Note:
R After holding for 10 minutes, the call is disconnected. Mute 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Note:
R MMUTEN is a soft key visible on the display during a call. Flash for landline calls MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:
R To change the flash time, see page 38. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit that is in use after you hear the call waiting tone. 1 Press MFLASHN to answer the 2nd call. 2 To switch between calls, press MFLASHN. Note:
R Please contact your phone service provider for details and availability of this service in your area. For assistance, please visit http://shop.panasonic.com/support 23 TGD56x(en)_1014_ver003.pdf 23 2016/10/14 17:58:09 Making/Answering Calls Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between handsets. 1 During an outside call, press MMENUN. 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer:
Press MOFFN. To establish a conference call:
MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold:
MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Transferring a cellular call between the handset and a cellular phone Transferring a cellular call from the handset to a cellular phone 1 Press MMENUN during a cellular call. 2 MbN: Transfer to cell a MSELECTN R The cellular call is transferred to the cellular phone. Note:
R Depending on your cellular phone type, you may need to set the cellular phone to be ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. Transferring a cellular call from a cellular phone to the handset During a conversation using a cellular phone, the call cannot be transferred to the handset by the cellular phone. Perform the following with the handset. 1 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 2 MbN: Select the corresponding cellular phone. a MSELECTN R The call is transferred to the handset. Answering a 2nd call If you receive a call while talking on the phone, the interrupt tone sounds (page 36) and the 2nd callers information is displayed if you subscribe to Caller ID service (page 43). Answering a 2nd call during a landline call 1 Press MMENUN during a landline call. 2 MbN: Hold a MSELECTN 3 To answer the 2nd call:
Press MCELLN while the 2nd call is being received. 4 To hang up the 2nd call and return to the 1st call (landline call), press MOFFN, then press M N. Answering a 2nd call during a cellular call 1 Press MMENUN during a cellular call. 2 MbN: Hold a MSELECTN 24 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 24 2016/10/14 17:58:09 Making/Answering Calls 3 To answer the 2nd call:
Press M is being received. N or MCELLN while the 2nd call 4 To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN.*1
*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. Intercom Intercom calls can be made between handsets. Note:
R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds
(page 36). To finish intercom, press MOFFN. To answer the call, press M N or MCELLN. MSELECTN Making an intercom call 1 MMENUN a MbN: Intercom a 2 MbN: Select the desired unit. a MSELECTN 3 When you finish talking, press MOFFN. Note:
R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. Answering an intercom call 1 Press M N to answer the page. 2 When you finish talking, press MOFFN. For assistance, please visit http://shop.panasonic.com/support 25 TGD56x(en)_1014_ver003.pdf 25 2016/10/14 17:58:09 Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list:
when an incoming call is being received when an incoming call is being recorded by the answering system situations shown above. when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, Caller blocked is displayed, and then the call is disconnected. Note:
R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available:
for intercom calls or calls received by call waiting. when a landline call (or cellular call) is being received during a cellular call (or landline call). R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). Block a single number: The unit blocks calls from specific phone numbers stored in the call block list. Block range of numbers: The unit blocks calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. Block unknown CID: The unit blocks calls that have no phone number. Single phone numbers and ranges of numbers can be stored in the call block list up to 150 items in total. Blocking unwanted callers:
When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.
*1 If you do not want this one ring to sound, select No in Turning the first ring on/
off (page 27). Storing a single phone number Important:
R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list n When a cellular phone is paired:
1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number:
MSELECTN a Press * (Edit) repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN n When a cellular phone is not paired:
1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number: MMENUN a MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN:
26 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 26 2016/10/14 17:58:09 Call Block No: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers. 1 MCALL BLOCKN 2 MbN: One ring for blocked call 3 MbN: Select the desired setting. a a MSELECTN MSAVEN a MOFFN Viewing/editing/erasing call block numbers 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. 4 To edit a number:
R After viewing, press MOFFN to exit. MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:
MERASEN a MbN: Yes a MSELECTN a MOFFN Note:
R When editing, press the desired dial key to add digits and press MCLEARN to erase digits. Erasing all call block numbers 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN MSELECTN Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary
(24 digits max.). a MSAVEN a MOFFN Adding call blocked numbers manually 1 MCALL BLOCKN 2 MbN: Block a single number a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the phone number (24 digits max.). MSELECTN a MSAVEN a MOFFN Storing a range of number 1 MCALL BLOCKN 2 MbN: Block range of numbers a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). a MSELECTN MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 MCALL BLOCKN 2 MbN: Block unknown CID a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Turning the first ring on/off You can choose whether the first ring sounds when a call is received. Yes (default): The first ring for all calls will be heard, including calls from blocked phone numbers. For assistance, please visit http://shop.panasonic.com/support 27 TGD56x(en)_1014_ver003.pdf 27 2016/10/14 17:58:09 Phonebook Phonebook You can add 1,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 29). The following groups are available:
Group 1: Home*1 (default) Group 2: Cell 1*1 Group 3: Cell 2*1 Group 4-9: You can change the group name for each group.
*1 For groups 1-3, the group names cannot be changed. Important:
R All entries can be shared by any registered handset. R You can copy phonebook entries from a Bluetooth cellular phone to the units phonebook (page 45). Adding phonebook entries 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note:
R In step 3, you can switch the language for entering characters.
# a MbN: Select the desired language. a MOKN Entering characters Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. The following operations are also available. Operation Switch between the uppercase and lowercase
(A a) Key
*
28 Key MFN MEN MCLEARN Operation Move the cursor Erase the character or number R To erase all, press and hold it. R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 2 seconds after entering a character, the character is fixed and the cursor moves to the next space. Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. n When a cellular phone is paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Save a MSELECTN 4 To store the name, continue from step MMENUN 3, Editing entries, page 30. n When a cellular phone is not paired:
1 MEN REDIAL 2 MbN: Select the desired entry. a 3 To store the name, continue from step MSAVEN 3, Editing entries, page 30. Note:
R The name stored in the phonebook will be reflected in the redial list after you make a call using that phonebook entry. Storing caller information to the phonebook n When a cellular phone is paired:
1 MCN CID 2 MbN: Select the desired entry. a MSELECTN R To edit the number, press * (Edit) repeatedly until the phone number is shown in the desired format. For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 28 2016/10/14 17:58:09 3 MSAVEN 4 MbN: Phonebook a MSELECTN 5 Continue from step 3, Editing entries, page 30. n When a cellular phone is not paired:
1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number:
MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN:
Phonebook a MSELECTN a Go to step 4. 3 MbN: Save phonebook a 4 Continue from step 3, Editing entries, MSELECTN page 30. Groups Groups can help you find entries in the phonebook quickly and easily. You can change the group name for groups 4-9
(Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Changing group names/setting ringer ID 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a MSELECTN R If you selected Home, Cell 1, or Cell 2, go to step 5. 4 To change group names MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN Phonebook 5 To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN 6 MOFFN Finding and calling from a phonebook entry 1 MFN W 2 To scroll through all entries MbN: Select the desired entry. To search by first character Press the dial key (0 to 9, or #) which contains the character you are searching for. MbN: Scroll through the phonebook if necessary. To search by group MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary. To search by query You can narrow down the search to enter the first characters of a name. 3 n Using a cellular line:
*
To search for the name, enter the first characters (up to 4) in uppercase (page 28). a MOKN MbN: Scroll through the phonebook if necessary. MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). MbN: Select the desired cellular phone. a MSELECTN n Using a landline:
M N For assistance, please visit http://shop.panasonic.com/support 29 TGD56x(en)_1014_ver003.pdf 29 2016/10/14 17:58:09 Phonebook Editing entries 1 Find the desired entry (page 29). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a 5 MbN: Select the desired group (page 29). MOKN a MSELECTN 2 times a MOFFN Erasing entries Erasing an entry 1 Find the desired entry (page 29). 2 MMENUN a MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Erasing all entries 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 3 MbN: Select the desired group. a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN MSELECTN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MFN W. 2 MbN: Select the desired entry. 3 Press MCALLN to dial the number. Note:
R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 22). R If you have rotary/pulse service, you need to press * before pressing MFN W in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * to the beginning of phone numbers you wish to chain dial (page 28). Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers:
key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters 4 Enter the partys phone number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN n From the phonebook:
key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:
R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key.
(1 to 9). a MMENUN Editing an entry 1 Press and hold the desired speed dial key 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a 30 MOKN a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 30 2016/10/14 17:58:09 Phonebook Erasing an entry 1 Press and hold the desired speed dial key 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN
(1 to 9). a MMENUN Viewing an entry/Making a call n Using a cellular line:
1 Press and hold the desired speed dial 2 MCELLN key (1 to 9). R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 3 MbN: Select the desired cellular phone. a MSELECTN n Using a landline:
1 Press and hold the desired speed dial 2 To make a call, press M key (1 to 9). N. For assistance, please visit http://shop.panasonic.com/support 31 TGD56x(en)_1014_ver003.pdf 31 2016/10/14 17:58:09 Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 Press MCN or MDN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note:
R To exit the operation, press MOFFN. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:
Operation Viewing the caller list. Answering device Sub-menu 2 Main menu:
Sub-menu 1 Play new message Play all message Erase all message*1 Greeting Record greeting*1 Check greeting Pre-recorded*1
(Reset to pre-recorded greeting) Settings Code
#280 Code
#213 Code
#323
#324
#325
#302
#303
#304 29 43 52 52 53 51 52 52 32 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 32 2016/10/14 17:58:09 Sub-menu 1 Settings Sub-menu 2 Ring count*1 Recording time*1 Remote code*1 Screen call Voicemail access*3 Answer on*1 Answer off*1 Main menu:
Operation Listening to voicemail messages. Intercom Main menu:
Operation Paging the desired unit. Settings Toll saver 2-7 rings
<4 rings>
<3 min>
1 min Greeting only*2
<111>
<On>Off Programming Code
#211
#305
#306
#310
#327
#328 Code
#330 Code
#274 54 55 53 54 51 51 56 25 For assistance, please visit http://shop.panasonic.com/support 33 TGD56x(en)_1014_ver003.pdf 33 2016/10/14 17:58:09 Bluetooth Programming Main menu:
Sub-menu 1 Link to cell 1:Add new device*4
(for CELL 1) 2:Add new device*4
(for CELL 2) Phonebook transfer Headset Sub-menu 2 Connect*1/
Disconnect*1 Ringer volume Handset Ringer volume Base unit*1 Ringer tone*7 Select unit to ring*1 Ring as cell
(limited)*1 Alert settings*1 Alert On/Off Alert settings*1 Voice alert Alert settings*8 Alert tone Pair Unpair Add new device*4 Connect*1/
Disconnect*1 Pair Unpair Settings Off6 <6>
Off6 <1>
<Tone 2>*5
<Tone 4>*6
<All>
Handset 1-6
<On (with Talking CID)>
On (without Talking CID) Off
<On>Off
<On>Off
<Tone 1>*5
<Tone 2>*6 Code
#6251*5
#6252*6
#6281*5
#6282*6
#G6281*5
#G6282*6
#6291*5
#6292*6
#6271*5
#6272*6
#6141*5
#6142*6
#6101*5
#6102*6
#6031*5
#6032*6
#6041*5
#6042*6
#6241*5
#6242*6
#6111*5
#6112*6
#618
#621
#622
#621
#612 19 22 18 18 47 47 47 17 17 45 49 49 49 49 34 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 34 2016/10/14 17:58:09 Sub-menu 1 Settings Sub-menu 2 Auto connect*1 Cell area code*1 Cell line only mode*1 Cell line select Set PIN*1 International code*1 Country code*1 Trunk prefix*1 Main menu:
Sub-menu 1 Date and time*1 Memo alarm Set date & time Sub-menu 2 Alarm13 Time adjustment*1, *9 Speed dial Main menu:
Operation Viewing the speed dial entry. Programming Settings Off
<1 min>
3 min 5 min 10 min On
<Off>
<Manual>
Cellphone 1*4 Cellphone 2*4
<0000>
Settings
<Off>
Once Daily Weekly
<Caller ID auto>
Manual Code
#632
#633
#157
#634
#619
#117
#118
#119 Code
#101
#720
#226 Code
#261 18 20 19 20 20 45 16 40 30 For assistance, please visit http://shop.panasonic.com/support 35 TGD56x(en)_1014_ver003.pdf 35 2016/10/14 17:58:09 Programming Main menu:
Sub-menu 1 Ring adjustments Settings Sub-menu 2 Ringer volume Handset*3 Ringer volume Base unit*1, *3 Ringer tone*3, *7, *10
(Handset) Interrupt tone*11 Silent mode Set date & time Talking caller ID Date and time*1 Memo alarm Alarm13 Time adjustment*1, *9 Handset Base unit*1 Settings Off6 <6>
Off6 <1>
<Tone 1>
<On>Off On/Off On
<Off>
Start/End
<11:00 PM/
06:00 AM>
Select group Home Cell 1 Cell 2 Group 4-9
<Off>
Once Daily Weekly
<Caller ID auto>
Manual
<On>Off On
<Off>
Code
#160
#G160
#161
#201
#238
#237
#241
#101
#720
#226
#162
#G162 24 40 41 41 16 40 43 36 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 36 2016/10/14 17:58:09 Sub-menu 2 Change name*1 Registration Sub-menu 1 Key detector setting*12 1:Add new device
(for Detector1)*13 2:Add new device
(for Detector2) 3:Add new device
(for Detector3) 4:Add new device
(for Detector4) Deregistration Call block*1 Speed dial Record greeting*1 Voicemail*3 LCD contrast
(Display contrast) Handset name Display name Key tone Caller ID edit
(Caller ID number auto edit) Auto talk*15 Block a single number Block range of numbers Block unknown CID
(CID: Caller ID) One ring for blocked call Save VM access#*1
(VM: Voicemail) VM tone detect*1 Settings Detector1 Detector2*14 Detector3*14 Detector4*14 Block
<Unblock>
<Yes>
No
<On>Off Level 14 <2>
On
<Off>
<On>Off
<On>Off On
<Off>
Programming Code
#6561
#6562*14
#6563*14
#6564*14
#6571
#6572*14
#6573*14
#6574*14
#6581
#6582*14
#6583*14
#6584*14
#217
#240
#173
#261
#302
#331
#332
#145
#104
#105
#165
#214
#200 26 27 27 27 30 51 56 56 41 41 44 22 For assistance, please visit http://shop.panasonic.com/support 37 TGD56x(en)_1014_ver003.pdf 37 2016/10/14 17:58:10 Programming Sub-menu 1 Set tel line*3 Sub-menu 2 Set dial mode*1 Set flash time*1, *16 Call sharing*1 Registration Change language Set line mode*1, *17 Register handset Deregistration*2 Display Announcement*1 Customer support Main menu:
Operation Displaying customer support Web address. Settings
<Tone>
Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms
<700 ms>
900 ms A <B>
<On>Off
<English>
Espaol
<English>
Espaol Code
#120
#121
#122
#194
#130
#131
#110
#112 Code
#680 16 23 23 41 41 16 16 Key detector*12 Main menu:
Sub-menu 1 Search Battery check
*1 If you program these settings using one of the units, you do not need to program the same Sub-menu 2 Code
#655 Settings
*2 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 19).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 The preset melodies in this product (Tone 3 - Melody 10) are used with permission of 2004 - 2013 Copyrights Vision Inc. 38 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 38 2016/10/14 17:58:10 Programming
*8 The preset melodies in this product (Tone 1 and Tone 2) are used with permission of
*9 This feature allows the unit to automatically adjust the date and time each time caller 2013 Copyrights Vision Inc. information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 16).
*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or
*11 This tone lets you know when you receive an outside call while you are on another line or an 2). If you select a melody, you cannot distinguish lines by their ringers. intercom call. If you select On, the tone sounds 2 times. manual for more information on the key detector.
*12 This setting is available when you have the key detector (KX-TGA20). Read the installation
*13 For models with supplied key detectors, the display shows 1: Detector1.
*14 If you register 2 or more key detectors.
*15 If you subscribe to a Caller ID service and want to view the callers information after lifting up
*16 The flash time depends on your telephone exchange or host PBX. Contact your PBX the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.
*17 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. For assistance, please visit http://shop.panasonic.com/support 39 TGD56x(en)_1014_ver003.pdf 39 2016/10/14 17:58:10 Programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:
R Make sure the units date and time setting is correct (page 16). 1 MMENUN#720 2 MbN: Select the desired alarm. a 3 MbN: Select the desired alarm option. a MSELECTN MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:
Enter the desired month and date. a MOKN n Weekly:
MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN 7 Enter a text memo (10 characters max.). a MOKN 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. a MSAVEN 9 MbN: Select the desired snooze setting. 10 MSELECTN a MOFFN Note:
R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature
(page 29), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important:
R Make sure the units date and time setting is correct (page 16). R We recommend turning the base unit ringer off (page 34, 36) in addition to turning the silent mode on. R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMENUN#238 40 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 40 2016/10/14 17:58:10 exit. 2 MbN: Select the desired setting. a wish to start this feature. MSAVEN R If you select Off, press MOFFN to 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN Changing the start and end time 1 MMENUN#237 2 Continue from step 3, Turning silent mode on/off, page 40. Selecting groups to bypass silent mode 1 MMENUN#241 2 MbN: Select the desired groups. a MSELECTN R group numbers. is displayed next to the selected R To cancel the selected group:
MbN: Select the group. a Press MSELECTN again. disappears. 3 MSAVEN a MOFFN Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 41). 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Programming Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. 1 MMENUN#105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:
R See page 4 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:
2 Base unit:
Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. MMENUN#130 3 Handset:
Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. For assistance, please visit http://shop.panasonic.com/support 41 TGD56x(en)_1014_ver003.pdf 41 2016/10/14 17:58:10 Programming 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to 3 MbN: Yes a MSELECTN a MOFFN cancel. a MSELECTN 42 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 42 2016/10/14 17:58:10 Using Caller ID service Important:
R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:
Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Missed calls If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:
R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:
A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Caller ID Service Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:
subscribe to a Caller ID service of your phone service provider. turn this feature on (page 36). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your phone service provider following every ring. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:
R Make sure the units date and time setting is correct (page 16). Viewing the caller list and calling back n Using a cellular line 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press MSELECTN. 4 MCELLN To exit, press MOFFN. R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. For assistance, please visit http://shop.panasonic.com/support 43 TGD56x(en)_1014_ver003.pdf 43 2016/10/14 17:58:10 Caller ID Service A specific line is set to make cellular calls (page 20). MSELECTN 5 MbN: Select the desired cellular phone. a n Using a landline 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M To exit, press MOFFN. N. Note:
R If the entry has already been viewed or answered, is displayed. R or indicates the caller information was received from the cellular line. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. n When a cellular phone is paired:
1 MCN CID 2 MbN: Select the desired entry. a 3 Press * (Edit) repeatedly until the MSELECTN phone number is shown in the desired format. 4 Using a cellular line:
To make a cellular call, continue from step 4, Viewing the caller list and calling back, page 43. Using a landline:
M N n When a cellular phone is not paired:
1 MCN CID 2 MbN: Select the desired entry. a 3 MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the MMENUN phone number is shown in the desired format. N 5 M Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:
When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit
(page 37). The default setting is On. Note:
R Phone numbers from the 4 most recently edited area codes are automatically edited. Erasing selected caller information 1 MCN CID 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN a MOFFN Erasing all caller information 1 MCN CID 2 MERASEN a MbN: Yes a MSELECTN a MOFFN 44 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 44 2016/10/14 17:58:10 Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones
(not paired) to the units phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important:
R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.) is stored as a separate entry with the same name. R If a phonebook entry includes additional data such as a picture, that entry may fail to copy to the base unit. R If your cellular phone includes international call entries, set the conversion codes before copying (page 45). 1 Handset:
2 Handset:
MMENUN#618 To copy from paired cellular phones:
MbN: Select the desired cellular phone. a MSELECTN R Copied items are stored to the group
(Cell 1 or Cell 2) which the cellular phone is paired to. To copy from other cellular phones
(not paired):
MbN: Other cell a MSELECTN a MbN: Select the group you want to copy to. a MSELECTN When Use the cell to transfer phone book is displayed:
Go to step 4. When Select mode menu is displayed:
MbN: Select Auto or Manual. a MSELECTN Auto: Download all entries from the cellular phone automatically. Go to step 5. 3 Handset:
4 Cellular phone:
Using Bluetooth Devices Manual: Copy entries you selected. R Select mode menu is displayed only when the cellular phone supports PBAP (Phone Book Access Profile) for Bluetooth connection. R Some cellular phones may require you to perform an operation on the cellular phone even if you select Auto. Follow the instructions of your cellular phone to copy phonebook entries. R For other cellular phones (not paired), you need to search for and select the base unit. The Bluetooth PIN (default:
0000) may be required. confirm the passkey, tap MOKN or otherwise to accept the pairing request. R The entries being copied are displayed R If your cellular phone prompts you to on the handset. 5 Handset:
Wait until Completed is displayed. R You can continue copying other entries if necessary. 6 Handset: MOFFN Note:
R Some copied entries may have characters which are not available. These characters can be displayed but cannot be entered when editing an entry. R The unit does not support some characters. If a copied entry includes those characters, they are replaced with other available characters or H. R If you receive a call while copying phonebook entries, the copying procedure stops. Try again after finishing the call. Setting conversion codes You must first set the following 3 dialing codes before transferring the phonebook from your cellular phone (4 digits max. each). International code: An international prefix used when you make an international call. Country code: Your country code for international calls. For assistance, please visit http://shop.panasonic.com/support 45 TGD56x(en)_1014_ver003.pdf 45 2016/10/14 17:58:10 Using Bluetooth Devices Trunk prefix: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. 1 MMENUN 2 To store International code:
#117 To store Country code: #118 To store Trunk prefix: #119 3 Enter the desired number. a MSAVEN a MOFFN Note:
R After you copy the entries, confirm that the numbers were transferred correctly.
[International code], [Country code], and [Trunk prefix] (page 45)
*1 When your paired Android phone is within the base units range, the date and time information is updated on the handsets display, if time adjustment feature is activated on your Android phone. Installing the Link to Cell app Download links are also available at the web page below. Link to Cell app For Android smartphone users www.panasonic.net/pcc/support/tel/
appalerts The free Link to Cell app helps you integrate your Android phone with your DECT phone for convenient use. Important:
R Your cellular phone must support SPP
(Serial Port Profile) specification. n Application (App) Alerts On/Off This feature alerts your DECT phone when your paired Android phone receives the following alert information:
[Google Calendar]
[Email]
[Gmail]
[Text messages]
[Facebook]
[Twitter]
[Instagram]
[Low Battery] information You can turn each type of alert on or off using the Link to Cell app. If you turn the alerting app on, your DECT phone alerts you with the corresponding information. n Phone Settings Using your paired Android phone, you can program your Phone Settings for the following features:
[Time adjustment]*1
[Cell line only mode] (page 19) Starting the app for the first time 1 Make sure that your Android devices Bluetooth feature is turned on and that your Android device is paired to the base unit. icon. 2 Start the Link to Cell app by tapping its 3 Follow the on-screen instructions. Important:
R For further information, refer to the instructions on web page listed above. R To use this feature, the following settings are required. Android phone: Bluetooth must be turned on. Android phone: [Application Alerts manager]*1 must be turned on. 46 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 46 2016/10/14 17:58:10 Handset: Alert On/Off must be R If this feature does not work, turn on your turned on (page 47). devices Bluetooth feature, unplug the base units AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts manager]
Use the following procedure after installing the Link to Cell app. Android 2.x: Open your devices
[Settings] app. a Tap [Accessibility]. a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes. Android 4.x: Open your devices
[Settings] app. a Tap [Accessibility]. a Turn on [Application Alerts manager]. Requirements R An Android device (Android 2.1 or later) Text message (SMS) alert For iPhone and BlackBerry users This feature alerts you on your DECT phone when your paired cellular phone receives SMS messages. The Link to Cell app is not required for iPhone and BlackBerry users. Important:
R Your cellular phone must support MAP
(Message Access Profile) specification. R For further information, refer to the instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings Bluetooth must be turned on. are required:
iPhone and BlackBerry Phone:
Handset: Alert On/Off must be R If this feature does not work, turn on your turned on (page 47). devices Bluetooth feature, unplug the base units AC adaptor, and then reconnect it. Using Bluetooth Devices Alert settings for your DECT phone If your cellular phone is paired to the base unit and receives notifications, the handset can alert you:
by briefly displaying a message by announcement by sounding alert tones Important:
R For Android users: Use the Link to Cell app to enable the desired alerts (page 46). Turning alert on/off Once this feature is turned on, it will alert you on the handset when your cellular phone receives notifications. On (default): The handset alerts you. Off: The handset does not alert you. 1 For CELL 1: MMENUN#6101 For CELL 2: MMENUN#6102 2 MbN: Select the desired setting. a MSAVEN a MOFFN voice announcement. Setting the voice alert You can turn on/off the voice alert. On (default): The handset notifies you by Off: Voice announcement is not 1 For CELL 1: MMENUN#6031 For CELL 2: MMENUN#6032 2 MbN: Select the desired setting. a available as alert. MSAVEN a MOFFN Selecting the alert tone 1 For CELL 1: MMENUN#6041 For CELL 2: MMENUN#6042 2 MbN: Select the desired setting. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support 47 TGD56x(en)_1014_ver003.pdf 47 2016/10/14 17:58:10 Using Bluetooth Devices Remote voice assist For iPhone and Android smartphone users You can use the handset to operate the voice recognition feature of your cellular phone
(Siri, Google Now, or S Voice). For example, you can speak into the handset and command your cellular phone to make a call. Important:
R Your cellular phone must support the Hands Free Profile (HFP) specification. R In order to use this feature, the voice recognition feature of your cellular phone must be turned on. R This feature may not be available when your cellular phone is in use. R This feature is limited to the spoken commands that are recognized by your cellular phone. For information about the available commands, refer to the operating instructions of your cellular phone. R This feature may not be available when your cellular phone is locked. Compatible voice recognition features R Google Now (Android xx or later) R S Voice (Android xx or later) R Siri (iOS xx or later) Activating remote voice assist 1 M N R Go to step 3 in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 2 MbN: Select the desired cellular phone. a 3 Wait until Voice comm. is displayed. MSELECTN R A confirmation tone sounds. R Speakerphone is turned on automatically. R To switch to the receiver, press MZN. 4 Speak your commands to your handset. R When you have finished using remote voice assist, press MOFFN. Note:
R For Android users: Depending on your cellular phone, you may need to set Google Now as your cellular phone's default voice recognition feature. For more information, refer to the operating instructions of your cellular phone. R The handset's dial keys are not available when using this feature. If you need to press dial keys during a cellular call, make the call without using this feature (page 21). R While using this feature, you cannot use another handset to make a cellular call using the same cellular line. R You cannot use this feature while talking on a landline call. R If you receive a call on the landline or on another cellular line while using this feature, the interrupt tone sounds. R If you receive a call on the same cellular line while using this feature, voice recognition ends. Using a Bluetooth headset
(optional) By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on landline calls. Important:
R Your Bluetooth headset must support the Headset Profile (HSP) specification. R Only 1 Bluetooth headset can be paired to the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R For best performance, we recommend using your Bluetooth headset within 1 m
(3.3 feet) of the base unit. The base unit can communicate with Bluetooth headsets within a approximately 10 m (33 feet) range. 48 For assistance, please visit http://shop.panasonic.com/support
*1 You cannot use a Bluetooth headset to talk on a cellular line. TGD56x(en)_1014_ver003.pdf 48 2016/10/14 17:58:10 Pairing a Bluetooth headset to the base unit Important:
R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Bluetooth headset:
Set your headset to pairing mode. R Refer to the headsets operating instructions. MMENUN#621 2 Handset:
3 If your headset PIN is 0000, go to step 4. If your headset PIN is not 0000, press MCLEARN, then enter your headsets PIN. R Typically, default PIN is 0000. Refer to the headsets operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When the Bluetooth headset is ready for use, the HEADSET indicator on the base unit lights up. Using Bluetooth Devices 2 MbN: Yes a MSELECTN R When the headset is unpaired, the HEADSET indicator is turned off. 3 MOFFN Operating a Bluetooth headset using a landline Important:
R Refer to your headsets operating instructions for details. R Some features described here may not be available depending on Bluetooth wireless headset. Answering landline calls with your headset To answer a landline call, press your headsets button. When you finish talking, press your headsets button. Note:
R If you cannot hang up the call using your N (STOP) on the base headset, press M unit. Connecting/disconnecting a Bluetooth headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important:
R Make sure that the headset is turned on. 1 To connect/disconnect:
MMENUN#622 R A long beep sounds. 2 MOFFN Unpairing a Bluetooth headset You can cancel a pairing of the headset that is stored to the base unit. 1 MMENUN#612 Call sharing between your headset and the handset Important:
R To activate this feature, you should set call sharing mode to on beforehand (page 38). n While the handset is on a landline call:
To join the conversation with your headset, press your headsets button. n While your headset is on a landline call:
To join the conversation with the handset, press M N. Switching between the base unit and your headset You can switch from the base unit to your headset while listening to messages recorded on the base unit answering system. R You can only switch from the base unit to your headset. For assistance, please visit http://shop.panasonic.com/support 49 TGD56x(en)_1014_ver003.pdf 49 2016/10/14 17:58:10 Using Bluetooth Devices n To switch to your headset:
Press your headsets button. Adjusting your headset receiver volume Base unit Press MjN or MkN repeatedly while using your headset. Note:
R Depending on your headset, the receiver volume may not be adjustable. 50 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 50 2016/10/14 17:58:10 Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 55). Important:
R Make sure the units date and time setting is correct (page 16). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes. A maximum of 64 messages can be recorded. Note:
R When message memory becomes full:
Messages full is shown on the The message counter on the base unit handset display. flashes if the answering system is turned on. If you use the pre-recorded greeting message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Answering System for Landline Handset 1 To turn on:
MMENUN#327 To turn off:
MMENUN#328 2 MOFFN Note for base unit and handset:
R When the answering system is turned on, the message counter on the base unit displays the total number of messages (old and new). Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:
your own greeting message a pre-recorded greeting message Recording your greeting message 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:
If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. If the message recording time (page 55) For assistance, please visit http://shop.panasonic.com/support 51 TGD56x(en)_1014_ver003.pdf 51 2016/10/14 17:58:10 Answering System for Landline Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Using the base unit When new messages have been recorded, the message indicator (
) on the base unit flashes. Press M R During playback, the message indicator N (PLAY).
(
) on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Key MjN or MkN M N N N (STOP) M M MERASEN Operation Adjust the speaker volume Repeat message*1 Skip message Stop playback Erase currently playing message
*1 If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:
MMENUN#323 To listen to all messages:
MMENUN#324 2 When finished, press MOFFN. Note:
R To switch to the receiver, press M R You can also use the MPLAYN soft key, if N. displayed, to play new messages. Operating the answering system MMENUN a MbN: Answering device a MSELECTN Key MDN or MCN 1 or MFN 2 or MEN 3 4 5 6 76 8 MPAUSEN 9 or MSTOPN 0
*4*3
*5 Operation Adjust the receiver/speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Pause message*2 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages 52 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 52 2016/10/14 17:58:11 Answering System for Landline 4 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 5 MbN: Select the desired cellular phone. a MSELECTN Erasing all messages 1 MMENUN#325 2 MbN: Yes a MSELECTN a MOFFN Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:
R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMENUN#306 2 Enter the desired 3-digit remote access code. a MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 53. R The entered remote access code is deleted. Key
*6 Operation Reset to a pre-recorded greeting message
*1 If pressed within the first 5 seconds of a
*2 To resume playback:
message, the previous message is played. MbN: Playback a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Calling back (Caller ID subscribers only) n Using a landline:
1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN n Using a cellular line:
1 Press MPAUSEN during playback. 2 MbN: Call back (Cell) a MSELECTN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 20). 3 MbN: Select the desired cellular phone. a MSELECTN Editing the number before calling back n Using a landline:
1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format
(page 44). N 4 M n Using a cellular line:
1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format
(page 44). For assistance, please visit http://shop.panasonic.com/support 53 TGD56x(en)_1014_ver003.pdf 53 2016/10/14 17:58:11 Answering System for Landline Using the answering system remotely 1 Dial your landline phone number from a 2 After the greeting message starts, enter 3 Follow the voice guidance prompts as your remote access code. touch-tone phone. necessary or control the unit using remote commands (page 54). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 54). Note:
R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key 1 2 4 5 9 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0
*4 Erase currently playing message 54 Operation Key
*5 Erase all messages
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a message, the previous message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only touch-tone phone. Turning on the answering system remotely 1 Dial your phone number from a 2 Let the phone ring 15 times. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 53). R A long beep is heard. Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the units speaker. To adjust the speaker volume, press MDN or MCN repeatedly. You can answer the call by pressing M the handset. Call screening can be set for each unit. The default setting is On. 1 MMENUN#310 2 MbN: Select the desired setting. a N on MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 54 2016/10/14 17:58:11 Answering System for Landline answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 54), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 55. Note:
R When you select Greeting only:
the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 51). For assistance, please visit http://shop.panasonic.com/support 55 TGD56x(en)_1014_ver003.pdf 55 2016/10/14 17:58:11 Useful Information Voicemail service for landline In addition to your units answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit's answering system. R To use the voicemail service rather than the units answering system, turn off the answering system (page 51). If you have units answering system set to on and also the voicemail enabled, the system with least amount of rings will record the message first. Example:
If the units answering system is set to 4 rings
(page 54) and the voicemail answering system provided by your phone company is set to 6 rings (call your service provider), the units answering system will record the incoming call first. Storing the voicemail (VM) access number In order to listen to your voicemail messages, you must dial your phone service providers voicemail access number. Once you have stored your voicemail access number, you can dial it automatically (page 56). 1 MMENUN#331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:
R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 22) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Example:
To erase the voicemail access number 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Your phone service provider sends special signals (sometimes called voicemail tones or stutter tones) to the unit to let you know you have new voicemail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M handset, you have new voicemail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voicemail messages have been recorded. Turn this feature off when:
You do not subscribe to voicemail service. Your phone service provider does not send N on the voicemail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your phone service provider. Turning VM tone detection on/off The default setting is On. 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to voicemail messages When new messages have been recorded, Voicemail msg. via phone co. is displayed if message indication service is available. 1 MMENUN#330 56 R The speakerphone turns on. For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 56 2016/10/14 17:58:11 1-222-333-4444VM access numberPausesPasswordPPPP8888 Useful Information AC adaptor cord and telephone line cord
(B). AC adaptor cord 3 Insert the hooks on the wall mounting
) on the
) and (
adaptor into holes (
base unit. 2 Follow the pre-recorded instructions. 3 When finished, hang up. Note:
R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Wall mounting Note:
R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Base unit 1 Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 2 Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the For assistance, please visit http://shop.panasonic.com/support 57 TGD56x(en)_1014_ver003.pdf 57 2016/10/14 17:58:11 1A1121212 Useful Information 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Mount the unit on a wall then slide down to secure in place. AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 83 mm (3 1/4 inches) 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (
) respectively.
) and (
58 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 58 2016/10/14 17:58:11 123451542345 To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). Useful Information Charger Drive the screws (
wall. 27.2 mm (1 1/16 inches)
) (not supplied) into the For assistance, please visit http://shop.panasonic.com/support 59 TGD56x(en)_1014_ver003.pdf 59 2016/10/14 17:58:11 BAA1212 Useful Information Error messages Display message Ask phone company for VM access #
Busy Check tel line Error!!
Failed Invalid Cause/solution R You have not stored the voicemail access number. Store the number (page 56). R No cellular phone is paired to the base unit. Pair a cellular phone (page 17). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The voice recognition feature could not be activated. Try again later. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 11). R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode
(page 19). R Recording was too short. Try again. R Someone is using a cellular line or headset. Try again later. R The phonebook copy is incomplete (page 45). The cellular phone is disconnected from the base unit. Make sure that other Bluetooth devices are not connected to the cellular phone, and try again. R Although the unit tried to connect to the cellular phone or headset, the connection has been failed. Someone is using a cellular line or headset. Try again later. Make sure that the cellular phone or headset is not connected to other Bluetooth devices. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 41). 60 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 60 2016/10/14 17:58:11 Display message Main unit no power orNo link. Re-
connect base AC adaptor. Requires subscription to Caller ID. Use rechargeable battery. Useful Information Cause/solution R Confirm the base units AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handsets registration may have been canceled. Re-register the handset (page 41). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 8. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 11). R Fully charge the batteries (page 12). R Check the connections (page 11). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 41). For assistance, please visit http://shop.panasonic.com/support 61 TGD56x(en)_1014_ver003.pdf 61 2016/10/14 17:58:11 Useful Information Problem I cannot pair a cellular phone to the base unit. I cannot connect a cellular phone to the base unit. I cannot hear a dial tone. Cause/solution R Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. R Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from your cellular phone. R Some cellular phones may require you to enter the Bluetooth PIN to pairing. Confirm that you entered the correct PIN. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range
(page 14). it on. R Your cellular phones Bluetooth feature is turned off. Turn R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually (page 19). R The cellular phone has not been paired to the base unit. Pair the cellular phone (page 17). R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset or other Panasonic DECT phone, disconnect the device, then perform the connecting procedure to the base unit. R If your cellular phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone. R Make sure that the CELL indicator lights up (page 15). R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. 62 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 62 2016/10/14 17:58:11 Useful Information Cause/solution R Change the display language (page 16). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 41). Cause/solution R Battery charge is low. Fully charge the batteries (page 12). R Clean the battery ends (
,
) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 11). Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Battery recharge Problem The handset beeps and/or flashes. I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it
(page 41). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume for landline is turned off. Adjust the R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 22, 36). ringer volume (page 22, 34). R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 18. R Silent mode is turned on. Turn it off (page 40). R The ringer volume is turned off by pressing and holding
). Press and hold 0 (
) again to turn it on 0 (
(page 22). For assistance, please visit http://shop.panasonic.com/support 63 TGD56x(en)_1014_ver003.pdf 63 2016/10/14 17:58:11 Useful Information Problem I cannot make local calls with the handset or base unit using a cellular line. I cannot make or answer cellular calls with the handset or base unit. I can make and answer cellular calls but cannot hear a sound. I cannot switch cellular calls from the unit to the cellular phone. I cannot make a call using a landline. I cannot use a cellular line or a landline. I cannot make long distance calls. Caller ID/Talking Caller ID Problem Caller information is not displayed. Cause/solution R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 20). R Depending on the cellular phones compatibility (page 5), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit (page 19). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The cellular phone is being used separately from your system. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and try again. R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone. R The dialing mode may be set incorrectly. Change the setting (page 16). R The unit can be used to talk on 2 lines at the same time
(for example, 2 cellular lines, or the landline and 1 cellular line). R Make sure that you have long distance service. Cause/solution R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service for landline calls may not be available in some areas. Contact your phone service provider for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. 64 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 64 2016/10/14 17:58:11 Problem Caller information is displayed or announced late. Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. The 2nd callers information is not displayed during an outside call. Useful Information Cause/solution R Depending on your phone service provider, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. R The ringer volume for landline is turned off. Adjust the R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 36). ringer volume (page 34). R The unit which is not selected to ring for cellular calls does not announce caller information. To change the selection, see page 18. R The Talking Caller ID feature is turned off. Turn it on R The ring as cell mode is set to On (without Talking R The number of rings for the answering system is set to 2
(page 36). CID). To change the mode, see page 18. rings or Toll saver. Select a different setting
(page 54). R Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call. R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 37). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 44). changes the time. Set the time adjustment to Manual
(off) (page 36). R Incorrect time information from incoming Caller ID R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). For assistance, please visit http://shop.panasonic.com/support 65 TGD56x(en)_1014_ver003.pdf 65 2016/10/14 17:58:11 Useful Information Using Bluetooth devices Problem I cannot copy phonebook entries from a cellular phone. I cannot have a conversation using the headset. or I cannot connect my headset to the base unit. Cause/solution R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone. R Someone is using a cellular line or headset. Try again later. R Turn the cellular phone off, then turn it on and try again. R If an entry is already stored in the units phonebook, the entry cannot be copied even by selecting another group. R iPhone does not support individual phonebook copy. R Confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. R Your Bluetooth headset is not paired. Pair it (page 49). R Turn your headset off, then turn it on and try again. R If your headset is already connected to another Bluetooth device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). Noise is heard during a call on the headset. Some headset enhanced features are not available. An error tone is heard when I try to program the Bluetooth feature. R A Bluetooth headset can communicate with the base unit within a range of approximately 10 m (33 feet). The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the base unit. R The base unit does not support enhanced features such as Last number redial or Call reject. R The Bluetooth feature cannot be accessed immediately after connecting the AC adaptor to the base unit. Wait a few seconds and try again. R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again. 66 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 66 2016/10/14 17:58:12 Problem App alert is not displayed or announced. or Text message alert is not displayed or announced. Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. Useful Information Cause/solution R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. your Android phone is turned on. R Confirm that the [Application Alerts manager] setting of R Alert On/Off is set to Off. Set it to On R Voice alert is set to Off. Set it to On (page 47). R The Bluetooth devices Bluetooth notifications setting is
(page 47). R The handset selected to display and/or announce alerts is R The Bluetooth device or its corresponding cellular line is R Your cellular phones Bluetooth feature is turned off. Turn turned off. in use. in use. it on. R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 18. Cause/solution R The answering system is turned off. Turn it on (page 51). R The answering system does not answer or record calls from cellular lines. the setting (page 55). messages (page 52, 52). R The message memory is full. Erase unnecessary R The recording time is set to Greeting only. Change R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 54) to a lower value, or contact your phone service provider. R The answering system will not answer incoming calls while the other devices such as headset or handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 53). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code
(page 53). R The answering system is turned off. Turn it on (page 54). R You cannot operate the answering system when calling a cellular phone paired to the base unit. For assistance, please visit http://shop.panasonic.com/support 67 TGD56x(en)_1014_ver003.pdf 67 2016/10/14 17:58:12 Useful Information Problem The unit does not emit the specified number of rings. Bluetooth PIN Problem I cannot remember the PIN. Voicemail Problem Voicemail msg. via phone co. is shown on the handset display. How do I remove this message from the display?
Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R If the first ring is turned off (No) (page 27), the number of rings decreases by 1 from the specified number of rings. Cause/solution R Change the PIN using the following method. 1 MMENUN#619 2 *7000 3 Enter the new 4-digit PIN. a MOKN 4 Enter the new 4-digit PIN again. a MSAVEN a MOFFN Cause/solution R This notification is displayed when your phone service providers voicemail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process. 68 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 68 2016/10/14 17:58:12 FCC and other information Useful Information For assistance, please visit http://shop.panasonic.com/support 69 TGD56x(en)_1014_ver003.pdf 69 2016/10/14 17:58:12 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information 70 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 70 2016/10/14 17:58:12 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearbyTVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information For assistance, please visit http://shop.panasonic.com/support 71 TGD56x(en)_1014_ver003.pdf 71 2016/10/14 17:58:12 Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola 72 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD56x(en)_1014_ver003.pdf 72 2016/10/14 17:58:12 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 73 TGD56x(en)_1014_ver003.pdf 73 2016/10/14 17:58:12 Gua Rpida Espaola 74 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD56x(en)_1014_ver003.pdf 74 2016/10/14 17:58:12 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 75 TGD56x(en)_1014_ver003.pdf 75 2016/10/14 17:58:12 Gua Rpida Espaola 76 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD56x(en)_1014_ver003.pdf 76 2016/10/14 17:58:12 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 77 TGD56x(en)_1014_ver003.pdf 77 2016/10/14 17:58:12 Gua Rpida Espaola 78 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD56x(en)_1014_ver003.pdf 78 2016/10/14 17:58:12 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 79 TGD56x(en)_1014_ver003.pdf 79 2016/10/14 17:58:12 Gua Rpida Espaola 80 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) TGD56x(en)_1014_ver003.pdf 80 2016/10/14 17:58:12 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 81 TGD56x(en)_1014_ver003.pdf 81 2016/10/14 17:58:12 Appendix Customer services 82 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 82 2016/10/14 17:58:12 Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informaon, Operang Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Limited Warranty (ONLY FOR U.S.A.) Appendix For assistance, please visit http://shop.panasonic.com/support 83 TGD56x(en)_1014_ver003.pdf 83 2016/10/14 17:58:12 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix 84 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1014_ver003.pdf 84 2016/10/14 17:58:12 Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 Index
#
3-way conference: 23 A Additional handset: 41 Alarm: 40 Answering calls: 22 Answering system Call screening: 54 Erasing messages: 52, 53, 54 Greeting message: 51 Greeting only: 55 Listening to messages: 52, 54 Number of rings: 54 Recording time: 55 Remote access code: 53 Remote operation: 53 Ring count: 54 Toll saver: 54 Turning on/off: 51 Assist button: 48 Auto talk: 22, 37 B Battery: 11, 12 C Call block: 26 Bluetooth wireless technology Cellular phone (Link to cell): 17 Headset: 48 Phonebook transfer: 45 Booster (Clarity booster): 23 One ring for blocked call: 27 Call share: 23, 38 Call waiting: 23 Call Waiting Caller ID: 23 Caller ID number auto edit: 37, 44 Caller ID service: 43 Caller list: 43 Caller list edit: 44 Cellular calls: 21 Cellular phone Pairing: 17 Unpairing: 17 Chain dial: 30 CID (Caller ID): 43, 44 Conference calls: 24 Control type: 14 Customer support: 38 D Date and time: 16 Dialing mode: 16 Direct command code: 32 Display Contrast: 37 Index Language: 16 E Eco mode: 13 Error messages: 60 Flash: 23, 38 F G Groups: 29 H Handset Deregistration: 41 Name: 41 Registration: 41 Hold: 22 Intercom: 25 I K Key detector: 37, 38 L Key tone: 37 Landline calls: 21 Line mode: 38 Link to cell Alert settings for your DECT phone: 47 Area code: 20 Auto connection: 18 Cellular line only mode: 19 Cellular line selection: 20 Connection: 19 Link to Cell app: 46 Ring as cell mode: 18 Select unit to ring: 18 Text message (SMS: Short Message Service) alert: 47 P M Making calls: 21 Missed calls: 43 Mute: 23 Pause: 22 Phonebook: 28 PIN: 20 Power failure: 12 R Redialing: 21, 22 Ringer ID: 29 Ringer tone: 34, 36 Rotary/pulse service: 23 Silent mode: 40 Speed dial: 30 SP-PHONE (Speakerphone): 21 Talking Caller ID: 43 Temporary tone dialing: 23 Time adjustment: 36 Transferring calls: 24 Troubleshooting: 61 TTY: 82 VM (Voicemail): 56 Voice announcement language: 16 S T V TGD56x(en)_1014_ver003.pdf 85 2016/10/14 17:58:12 85 Index Voicemail: 56 Volume Receiver: 21 Ringer (Base unit): 34, 36 Ringer (Handset): 22, 34, 36 Speaker: 21 W Wall mounting: 57 86 TGD56x(en)_1014_ver003.pdf 86 2016/10/14 17:58:12 Notes 87 TGD56x(en)_1014_ver003.pdf 87 2016/10/14 17:58:13 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.
(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2016 Printed in Malaysia
*PNQX8351ZA*
*PNQX8351ZA*
PNQX8351ZA TT1116MU0 TGD56x(en)_1014_ver003.pdf 88 2016/10/14 17:58:13 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. . .IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490
This product uses the FCC Data API but is not endorsed or certified by the FCC