Panasonic KX-TGF570 Bluetooth Phone User Manual

Company: Panasonic Corporation of North America

FCC ID: ACJ96NKX-TGF570

submitted	available	document details (if available)	source link
December 12 2016	January 27 2017	Operating Instructions (English) Panasonic System Networks Co., Ltd. Antenna House PDF Output Library 2.6.0 (Windows)

exhibit
download
text

various

User Manual

Users Manual

pdf

3.61 MiB

December 12 2016 / January 27 2017

Operating Instructions Model No. Link2Cell Cordless Telephone with Digital Answering Machine KX-TGF572 KX-TGF573 KX-TGF574 KX-TGF575 KX-TG785SK Model shown is KX-TGF572. Before initial use, see Getting Started on page 12. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 87. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support Table of Contents Introduction Model composition .......................................4 Accessory information ..................................4 Graphical symbols for use on equipment and their descriptions ..........................................7 Important Information For your safety .............................................8 Important safety instructions ........................9 For best performance ...................................9 Other information .......................................10 Specifications .............................................11 Getting Started Setting up ...................................................12 Controls ......................................................14 Display icons/Indicators .............................16 Language settings ......................................17 Date and time .............................................17 Recording your greeting message .............18 Other settings .............................................18 Link to Cell Link to cell feature ......................................19 Pairing a cellular phone ..............................19 Link to cell settings .....................................20 Making/Answering Calls Using the Handset Making cellular calls ...................................23 Making landline calls ..................................23 Answering calls ..........................................24 Useful features during a call .......................24 Power backup operation for landline ..........27 Making/Answering Calls Using the Base Unit Making cellular calls ...................................29 Making landline calls ..................................29 Answering calls ..........................................30 Useful features during a call .......................30 Intercom Intercom .....................................................33 Call Block Call block ....................................................34 Storing unwanted callers ............................34 2 Phonebook Phonebook .................................................37 Speed dial ..................................................40 Programming Menu list .....................................................42 Alarm ..........................................................51 Silent mode ................................................52 Baby monitor ..............................................53 Other programming ....................................55 Registering a unit .......................................55 Caller ID Service Using Caller ID service ...............................56 Caller list ....................................................56 Using Bluetooth Devices Copying phonebook from a cellular phone

(phonebook transfer) ..................................59 Link to Cell app ..........................................60 Text message (SMS) alert .........................61 Alert settings for your DECT phone ...........61 Remote voice assist ...................................62 Using a Bluetooth headset (optional) .........63 Answering System for Landline Answering system for landline ...................65 Turning the answering system on/off .........65 Greeting message ......................................65 Listening to messages ...............................66 Advanced new message alerting features ......................................................68 Remote operation .......................................69 Answering system settings .........................70 Useful Information Voicemail service for landline .....................72 Wall mounting ............................................73 Error messages ..........................................75 Troubleshooting .........................................76 FCC and other information .........................84 Gua Rpida Espaola Gua Rpida Espaola ...............................87 Appendix Customer services .....................................98 Limited Warranty (ONLY FOR U.S.A.) .......99 Index Index.........................................................101 Table of Contents 3 Introduction Model composition Series Model No. KX-TGF570 series KX-TGF572 KX-TGF573 KX-TGF574 KX-TGF575 KX-TG785SK Base unit Part No. KX-TGF570 KX-TGF570 KX-TGF570 KX-TGF570 KX-TGF570 Handset Part No. KX-TGFA51 KX-TGFA51 KX-TGFA51 KX-TGFA51 KX-TGFA51 Quantity 2 3 4 5 5 Accessory information Supplied accessories Supplied handset qty. Accessory item/Part number No. A AC adaptor/PNLV226-0X B Telephone line cord/PNJA1186Z C Rechargeable batteries*5 D Handset cover/PNYNTGFA50BR*6 E Belt clip/PNKE1098Z1 F Charger/PNLC1078ZB 2 units*1 3 units*2 Accessory quantity 4 units*3 5 units*4 1 1 4 2 2 1 1 1 6 3 3 2 1 1 8 4 4 3 1 1 10 5 5 4

*1 KX-TGF572

*2 KX-TGF573

*3 KX-TGF574

*4 KX-TGF575/KX-TG785SK

*5 See page 5 for replacement battery information.

*6 The handset cover comes attached to the handset. A F 4 B C D E For assistance, please visit http://shop.panasonic.com/support Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 98). Accessory item Rechargeable batteries Headset Range extender Key detector Model number/Specifications HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type:

Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430 KX-TGA405*2 KX-TGA20*3

*1 Replacement batteries may have a different capacity from that of the supplied batteries.

*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support

*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:

http://www.panasonic.com/tga20 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system Handset (optional): KX-TGFA51 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. Bluetooth devices You can expand your phone system by pairing the following units to a single base unit. For assistance, please visit http://shop.panasonic.com/support 5 Introduction Your Bluetooth cellular phone*1: 2 max.

(for cellular calls: page 19) Your Bluetooth headset*1: 1 max.

(for a wireless hands-free conversation: page 63)

*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site:

http://shop.panasonic.com/bluetooth-phone Trademarks R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license. R iPhone is a registered trademark of Apple Inc. R Android is a trademark of Google Inc. R Gmail and Google Calendar are trademarks of Google Inc. R Facebook is trademark of Facebook, Inc. R Twitter is trademark of Twitter Inc. R Instagram is trademark of Instagram, Inc. R BlackBerry is owned by Research In Motion Limited and is registered in the United States and may be pending or registered in other countries. Panasonic is not endorsed, sponsored, affiliated with or otherwise authorized by Research In Motion Limited. R Siri is a registered trademark of Apple Inc. R Google Now is a trademark of Google Inc. R S Voice is a trademark of Samsung Electronics Co., Ltd. R All other trademarks identified herein are the property of their respective owners. 6 For assistance, please visit http://shop.panasonic.com/support Graphical symbols for use on equipment and their descriptions Symbol Symbol Explanation Alternating current (A.C.) Introduction Explanation Class P equipment

(equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) ON (power) Direct current (D.C.) Protective earth OFF (power) Protective bonding earth Stand-by (power) Functional earth For indoor use only ON/OFF (power;

push-push) Caution, risk of electric shock For assistance, please visit http://shop.panasonic.com/support 7 Important Information For your safety To prevent severe injury and loss of life/

property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF

(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. 8 For assistance, please visit http://shop.panasonic.com/support R This product is unable to make calls when:

the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 5. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how to recycle this battery. Important Information Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. For assistance, please visit http://shop.panasonic.com/support 9 Notice for product disposal, transfer, or return R This product can store your private/

confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heating devices, cooking appliances, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 10 For assistance, please visit http://shop.panasonic.com/support Important Information Specifications R Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range:

1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power:

115 mW (max.) R Power source:

120 V AC, 60 Hz R Power consumption:

Base unit:

Standby: Approx. 1.2 W Maximum: Approx. 4.5 W Charger:

Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:

0 C 40 C (32 F 104 F), 20 % 80 %

relative air humidity (dry) For assistance, please visit http://shop.panasonic.com/support 11 Getting Started Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 21). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack

(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Connect the AC adaptor to the power outlet. Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (

). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (

). Note:

R Use only the supplied Panasonic AC adaptor PNLV226. n Charger 12 R Follow the directions on the display to set up the unit. For assistance, please visit http://shop.panasonic.com/support 1445321114231 Removing the battery Battery charging Charge for about 7 hours. R Confirm Charging is displayed (

R When the batteries are fully charged, Fully charged is displayed.

). Getting Started Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 5, 9. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. Empty Note:

R At the end of each call, the unit displays a large icon for a few moments to indicate the battery level. For assistance, please visit http://shop.panasonic.com/support 13 1211 Controls Handset Getting Started R You can set the unit to play a voice announcement when the battery is low or needs charging. (page 18) Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 12 hours max.*1 7 days max.*1

*1 If eco mode is on. Note:

R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. However, during a cellular call, is not displayed even though this feature is activated. R Eco mode is turned off when the clarity booster is activated (page 25). Belt clip holes Speaker N (TALK) M Headset jack Dial keypad

*: Temporary tone dialing 0: (

MZN (SP-PHONE: Speakerphone) MCALL BLOCKN Microphone Receiver Display

) Ringer off 14 For assistance, please visit http://shop.panasonic.com/support BECDJKLIMAFGHABA) N(Assist)MFLASHN MOFFN (

M R You can use the handset to operate the voice recognition feature of your cellular phone by pressing M

(page 62) N. Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. VOL. (Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Base unit Getting Started Speaker Display MERASEN MEXITN N (PLAY/STOP) M Message indicator MANSWER ON/OFFN ANSWER ON/OFF indicator MCALL BLOCKN Bracket R The base unit has an unremovable bracket for desk or wall mounting. To mount on a wall, see page 73. MHOLDN MREDIALN MPAUSEN MFLASHNMCALL WAITN MZN (SP-PHONE: Speakerphone) SP-PHONE indicator Microphone Dial keypad

*: Temporary tone dialing M R You can use the base unit to operate the voice recognition feature of your cellular phone by pressing M

(page 62) N(Assist) MLOCATORN MINTERCOMN R You can locate a misplaced handset N. by pressing MLOCATORN. MCELL 2N CELL 2 indicator MCELL 1N CELL 1 indicator n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key MDN, MCN, M N, or M N: Scroll through various lists and items. VOLUME: MDN or MCN: Adjust the speaker volume while talking. M N/M N: Repeat/skip messages during playback. Charge contacts For assistance, please visit http://shop.panasonic.com/support 15 JIKLMQRSOPNABCDAFEBGH Getting Started Display icons/Indicators Handset display items Item Meaning Battery level Blocked call (page 34) Clarity booster is on.*2

(page 25) Baby monitor is activated. The name/number displayed next to the icon indicates the monitoring unit. (page 53) Answering system is being used by another unit. Someone is using the corresponding line. In use Cell1 in use Cell2 in use C1&C2 in use Line in use

*1 Corresponding lines (1, 2: cellular line) are indicated next to the item.

*2 During a cellular call, the item is not displayed even though the feature is activated.

*3 Corresponding lines (1, 2: cellular line, L:

landline) are indicated next to the item. If all lines are turned off, no line is indicated. Base unit display item Item Meaning Ringer volume is off.*1

(page 49, 50) Silent mode is on. (page 52) Call sharing mode is off.

(page 48) Greeting only is selected. Caller messages are not recorded. (page 71) A cellular call is in progress on that line. The cellular line is selected for the setting. Meaning Within base unit range Out of base unit range The landline is in use. R When flashing:

The call is put on hold. R When flashing rapidly: An incoming call is now being received. A cellular line is in use.*1 R When flashing:

The cellular call is on hold. R When flashing rapidly:

A cellular call is being received. Eco mode is on.*2 (page 14) A cellular phone is connected.*1 Ready to make/

receive cellular calls. R When turned off:

A cellular phone is not connected to the base unit. (page 21) A cellular call is in progress on that line. The cellular line is selected for the setting. Noise reduction is set.

(page 25) Equalizer is set. (page 25) Speakerphone is on.

(page 23) Ringer volume is off.*3

(page 24, 44, 46) Silent mode is on. (page 52) Call sharing mode is off.

(page 48) Alarm is on. (page 51) Handset number For assistance, please visit http://shop.panasonic.com/support Item Z 16 Item Meaning Blocked call (page 34) A Bluetooth headset is connected to the base unit. It is ready for use. A Bluetooth headset is in use. Answering system is being used by the handset. Someone is using the corresponding line. In use Cell1 in use Cell2 in use C1&C2 in use Line in use

*1 Corresponding lines (C1, C2: cellular line, L: landline) are indicated next to the item. If all lines are turned off, no line is indicated. CELL indicators on the base unit The CELL indicators show each cellular line status. Status On Flashing Flashing rapidly Meaning A cellular phone is connected. Ready to make/receive cellular calls. The cellular line is in use. Phonebook entries are being copied from a cellular phone (page 59). The base unit is searching for the paired cellular phone. The base unit is pairing a cellular phone. The remote voice assist feature is in use

(page 62). A cellular call is on hold. A cellular call is being received. Status Light off Getting Started Meaning A cellular phone is not paired to the base unit. A cellular phone is not connected to the base unit

(page 21). Language settings Display language Handset / Base unit 1 MMENUN#110 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN Handset: MOFFN Base unit: MEXITN Voice announcement language You can select the language used for the following features. Answering system guidance Low battery alert announcement Talking Caller ID Application (App) alert announcement Text message (SMS) alert announcement Handset 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time Handset 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2017 07 12 17 3 MOKN For assistance, please visit http://shop.panasonic.com/support 17 Getting Started 4 Enter the current hour and minute

(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:

R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Low battery alert This feature plays a voice announcement when the battery is low or needs charging. When this feature is turned on, the unit notifies you as follows. n When you end a call:

The unit plays a voice announcement when the battery is low or needs charging. If the battery status is almost empty, is displayed and the corresponding announcement is made only once. n When the handset is in standby mode:

If the battery is low or needs charging, the unit plays a voice announcement at the selected interval up to 3 times. Note:

R At the end of each call, the unit displays a large icon for a few moments to indicate the battery level. Setting low battery alert To turn this feature on, select the desired announcement interval, or select Off to turn this feature off. The default setting is Every hour. Handset 1 MMENUN#176 2 MbN: Select the desired setting. a MSAVEN a MOFFN Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 65 for details. Handset 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. Handset 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN 18 For assistance, please visit http://shop.panasonic.com/support Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to:

use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. talk on cellular calls even if your cellular phone is in your pocket or bag. enjoy cordless cellular calls even if your cellular phone plugged in and charging. Important:

R Your cellular phone must support the Hands Free Profile (HFP) specification. R You may pair 2 cellular phones and 1 Bluetooth headset. R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the Bluetooth headset and 1 cellular line*1). R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.

*1 You cannot use a Bluetooth headset to talk on a cellular line. Pairing a cellular phone Important:

R For more details and the list of compatible cellular phones, please visit our Web site:

http://shop.panasonic.com/bluetooth-phone R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone. Link to Cell 1 Base unit:

Press and hold MCELL 1N or MCELL 2N for about 5 seconds. R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone:

While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 0000). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed. 3 Base unit:

Wait until a long beep sounds. R It may take more than 10 seconds to complete pairing. R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. 4 MEXITN Note:

R If the cellular phone has already paired to the base unit, it is overwritten. R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions. R Make sure you cancel your cellular R The default setting for the alert feature is phones current pairing if you want to pair it to the other line (page 19). On, so when you pair your cellular phone to the base unit, this feature may be activated (page 61). (This depends on the version and type of cellular phone you are using.) Unpairing a cellular phone You can cancel the pairing of a cellular phone that is stored in the base unit. For assistance, please visit http://shop.panasonic.com/support 19 Link to Cell Handset 1 For CELL 1: MMENUN#6111 For CELL 2: MMENUN#6112 2 MbN: Yes a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When All is selected, all handsets and the base unit ring. Handset 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or All. a MSAVEN a MOFFN Note:

R When you select a specific handset to receive calls for a cellular line:

other handsets cannot answer the calls. the base unit can answer the calls even though it does not ring. However, you can make the base unit ring by adjusting the base unit ringer volume (page 49). R When you change to All from another setting, the base unit ringer volume also returns to the lowest level even if the ringer volume was changed. R The units selected with this setting have the alert feature (page 61) applied to them. Ring as cell mode Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone. The following settings are available:

Off: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 46). On (with Talking CID) (default):

The handset and base unit use your cellular phones ringer tone. Caller information is announced even if the Talking Caller ID is turned off. On (without Talking CID): The handset and base unit use your cellular phones ringer tone. Caller information is not announced even if the Talking Caller ID is turned on. Important:

R To use this feature, your cellular phone must support Bluetooth in-band ringtone. Refer to your cellular phones operating instructions. Handset 1 For CELL 1: MMENUN#6141 For CELL 2: MMENUN#6142 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:

R The units use the preset ringer tones instead of your cellular phones ringer tone when a cellular call is being received if:

your cellular phone is in silent mode

(depending on your cellular phone). the base unit is in use. 2 handsets are sharing a landline call. R If your cellular phone is in silent mode with On (with Talking CID) set, the unit announces caller information even when Talking Caller ID is turned off (page 46). To use the handset ringer tone instead of your cellular phones ringer tone Select Off in step 2, Ring as cell mode, page 20. To change the handset ringer tone for a cellular line, see page 44. 20 For assistance, please visit http://shop.panasonic.com/support Auto connection to the Bluetooth devices (cellular phones) After pairing, your Bluetooth devices are connected to the base unit. If you move the Bluetooth devices out of base unit range, the Bluetooth devices are disconnected from the base unit. This feature allows the base unit to try to reconnect the Bluetooth devices at regular intervals when it returns within base unit range. You can set the interval. The default setting is 1 min. Important:

R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on. R Some cellular phones lose connection after usage, please check the specifications of your cellular phone for more details. Handset 1 MMENUN#632 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:

R Some cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select Off in step 2. Check the specifications of your cellular phone. Connecting/disconnecting the cellular phone manually If you will not be using the paired cellular phones link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit. Note:

R After you disconnect a paired cellular phone from the base unit manually, it will Link to Cell automatically be connected to the base unit in 30 minutes. If you do not use the link to cell feature anymore, unpair the cellular phone (page 21). R A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary. Handset 1 To connect/disconnect:

For CELL 1: MMENUN#6251 For CELL 2: MMENUN#6252 R A long beep sounds. 2 MOFFN Cellular line only mode (If you do not use the landline) If you do not use the landline, we recommend setting the unit to the cellular line only mode. The default setting is Off. Important:

R If you turn on the Cell line only mode, disconnect the telephone line cord from the base unit. Otherwise the Cell line only mode cannot be activated. Handset 1 MMENUN#157 2 To turn on:

MbN: On a MSELECTN a MbN: Yes a MSELECTN To turn off:

MbN: Off a MSELECTN Note:

R Once you set this mode, you can use the following buttons to make cellular calls:

for the handset, press M N or MZN instead of MCELLN (page 23). for the base unit, press MZN without pressing MCELL 1N or MCELL 2N set for the cellular line selection (page 22, 29). R Once you set this mode, the following features cannot be used:

Landline features (page 50) Answering system (page 65) Messages cannot be received. For assistance, please visit http://shop.panasonic.com/support 21 Link to Cell Voicemail features (page 72) R After this mode is turned on or off, the base unit reboots. Bluetooth connections from cellular phones or Bluetooth headset are disconnected. If the auto connection is turned on (page 21), the cellular phones are reconnected. will be displayed on the handset momentarily. The handset can be used once is displayed. When you use the landline again Before connecting the telephone line to the base unit, select Off in step 2, Cellular line only mode (If you do not use the landline), page 21. Cellular line selection This feature determines which cellular line is selected to make cellular calls when:

you press MCELLN on the handset. you press M N or MZN on the handset while the cellular line only mode is turned on. you press MZN on the base unit while the cellular line only mode is turned on. The following settings are available:

Manual (handset only: default): You can select the desired cellular line when making a call. CELL 1 is selected. Cellphone 1*1 (base unit default):

Cellphone 2*1: CELL 2 is selected. Handset / Base unit 1 MMENUN#634 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN Handset: MOFFN Base unit: MEXITN Storing your area code (for dialing only a 7-digit phone number to make a local call) You need to add your area code when making cellular calls to a phone number in your area. Once you store your area code, it is automatically added to the beginning of the 7-digit phone number when making cellular calls. Handset 1 MMENUN#633 2 Enter the 3-digit area code. 3 MSAVEN a MOFFN R To correct a digit, press MCLEARN. Changing the Bluetooth PIN

(Personal Identification Number) The PIN is used to pair cellular phones to the base unit. The default PIN is 0000. To prevent unauthorized access to this product, we recommend that you change the PIN, and keep it confidential. Important:

R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, see page 83. Handset 1 MMENUN#619 R If the unit prompts you to enter the old PIN (when the default has been changed), enter the current 4-digit PIN. 2 Enter the new 4-digit PIN. a MOKN 3 Enter the new 4-digit PIN again. a MSAVEN a MOFFN

*1 After the Bluetooth device is paired, the device name is displayed. 22 For assistance, please visit http://shop.panasonic.com/support Making/Answering Calls Using the Handset Making cellular calls Important:

*1 You cannot use a Bluetooth headset to talk on a cellular line. 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). Go to step 4. 3 MbN: Select the desired cellular phone. a 4 When you finish talking, press MOFFN or MSELECTN place the handset on the base unit or charger. Note:

R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/

M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Adjusting the receiver or speaker volume Press MDN or MCN repeatedly while talking. Note:

R The receiver or speaker volume you set is kept for each line (landline and cellular lines). Making a cellular call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 4 MbN: Select the desired cellular phone. a MSELECTN Erasing a number in the redial list n When a cellular phone is paired:

MMENUN 1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN 5 MOFFN n When a cellular phone is not paired:

1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN a MOFFN MERASEN Making landline calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M N to make the call. R To make the call using the speakerphone, press MZN. 3 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:

R To switch to the speaker, press MZN. For assistance, please visit http://shop.panasonic.com/support 23 Making/Answering Calls Using the Handset To switch back to the receiver, press MZN/

M N. R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 M N Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 40). Example: If you need to dial the line access number 9 when making outside calls with a PBX:

1 9 a MDN (Pause) 2 Dial the phone number. a M Note:

R A 3.5 second pause is inserted each time N MDN (Pause) is pressed. Answering calls 1 Lift the handset and then press M N or MZN when the unit rings. R To answer a cellular call, you can also press MCELLN. 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 48). Temporary handset ringer off: You can turn the ringer off temporarily by pressing M N (left soft key). 24 Adjusting the handset ringer volume Press MDN or MCN repeatedly to select the desired volume while ringing. Note:

R You can adjust the ringer volume for cellular call and landline call by programming (page 44, 46). R The ringer volume you set is kept for each line (landline and cellular lines). One-touch ringer off for the handset Press and hold 0 (

) until the unit beeps to turn the ringer off. While the ringer is turned off, the handset will not ring for calls. R You can turn the ringer on again by pressing and holding 0 (

beeps.

) until the unit Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold on the cellular line:

Press MCELLN.*1 R Another handset user can take the call by pressing MCELLN.*1

*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. R The base unit user can take the call by pressing MCELL 1N or MCELL 2N. To release hold on the landline:

Press M R Another handset user can take the call N. by pressing M N. R The base unit user can take the call by pressing MZN. Note:

R After holding for 10 minutes, the call is disconnected. For assistance, please visit http://shop.panasonic.com/support Making/Answering Calls Using the Handset Mute 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Note:

R MMUTEN is a soft key visible on the display during a call. Flash for landline calls MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:

R To change the flash time, see page 48. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit that is in use after you hear the call waiting tone. 1 Press MFLASHN to answer the 2nd call. 2 To switch between calls, press MFLASHN. Note:

R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing for landline calls (for rotary/pulse service users) Press * before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed. However, during a cellular call, is not displayed even though the feature is activated. Handset noise reduction This feature allows you to hear the voice of the person you are talking to more clearly, by reducing the surrounding noise coming from the other partys telephone. 1 Press MMENUN while talking. 2 MbN: Noise reduction on or Noise reduction off a MSELECTN Note:

R The setting you made is kept for each line

(landline and cellular lines). The default settings are as follows:

for landline: Noise reduction off for cellular lines: Noise reduction R Depending on the environment where this handset is being used, this feature may not be effective. R This feature is not available while using the speakerphone. on Handset equalizer This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. 1 Press MMENUN while talking. 2 MbN: Equalizer a MSELECTN 3 MbN: Select the desired setting. 4 Press MOKN to exit. For assistance, please visit http://shop.panasonic.com/support 25 Making/Answering Calls Using the Handset Note:

R The setting you made is kept for each line

(landline and cellular lines). R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the R When both the Equalizer setting and speakerphone. noise reduction are activated, shown on the display. is Call share You can join an existing outside call. n While another unit is on a cellular call:

1 To join the conversation, press MCELLN. R You can join the conversation in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 2 MbN: Select the corresponding cellular phone. a MSELECTN n While another unit is on a landline call:

To join the conversation, press M N. Note:

R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 48). Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made:

between handsets between a handset and the base unit 1 During an outside call, press MMENUN. 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN R If you select Voice paging, the call will be switched from the ear-receiver mode to the speakerphone mode. 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer:

Press MOFFN. To establish a conference call:

MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold:

MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Transferring a cellular call between the handset and a cellular phone Transferring a cellular call from the handset to a cellular phone 1 Press MMENUN during a cellular call. 2 MbN: Transfer to cell a MSELECTN R The cellular call is transferred to the cellular phone. Note:

R Depending on your cellular phone type, you may need to set the cellular phone to be ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. 26 For assistance, please visit http://shop.panasonic.com/support Making/Answering Calls Using the Handset 4 To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN.*1

*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. Transferring a cellular call from a cellular phone to the handset During a conversation using a cellular phone, the call cannot be transferred to the handset by the cellular phone. Perform the following with the handset. 1 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 2 MbN: Select the corresponding cellular phone. a MSELECTN R The call is transferred to the handset. Answering a 2nd call If you receive a call while talking on the phone, the interrupt tone sounds (page 46) and the 2nd callers information is displayed if you subscribe to Caller ID service (page 56). Answering a 2nd call during a landline call 1 Press MMENUN during a landline call. 2 MbN: Hold a MSELECTN 3 To answer the 2nd call:

Press MCELLN while the 2nd call is being received. 4 To hang up the 2nd call and return to the 1st call (landline call), press MOFFN, then press M N. Answering a 2nd call during a cellular call 1 Press MMENUN during a cellular call. 2 MbN: Hold a MSELECTN 3 To answer the 2nd call:

N or MCELLN while the 2nd call Press M is being received. Power backup operation for landline When a power failure occurs, the charged handset temporarily supplies power to the base unit (power backup mode). This allows you to make and receive landline calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and phonebook are available only when using a handset other than the handset supplying power to the base unit. You can program Power failure and the default setting is Auto (page 48). Important:

R If a handset is not placed on the base unit when a power failure occurs, Power outage Press OFF is displayed. After pressing MOFFN on the handset, place it on the base unit to start power backup mode. R Power backup mode will not work if the battery level of the power supplying handset is or

. R Do not lift the power supplying handset from the base unit during power backup mode. Panasonic Ni-MH battery performance (supplied batteries) during power backup mode When the batteries are fully charged, operating time of the handset in power backup mode varies depending on usage. Continuous use of the handset in power backup mode: 1.5 hours max. Continuous use of the handset other than a handset in power backup mode: 2 hours max. For assistance, please visit http://shop.panasonic.com/support 27 Making/Answering Calls Using the Handset Not in use in power backup mode: 2 hours max. Making calls during a power failure n When only 1 handset is registered:

1 Lift the handset and dial the phone 2 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned number. on automatically and the call is made. 3 When the other party answers the call, keep the handset on the base unit and talk using the speakerphone. 4 When you finish talking, press MOFFN. n When 2 or more handsets are registered:

You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Note:

R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. phonebook feature to be used during a power failure. You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Answering calls during a power failure n When only 1 handset is registered:

1 When the unit rings, keep the handset on the base unit and press M MZN. R Speakerphone is turned on. N or 2 When you finish talking, press MOFFN. n When 2 or more handsets are registered:

When the unit rings, use a handset which is not supplying power to the base unit. R Do not use or lift the handset which is placed on the base unit during power backup mode. Note:

R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. Making a call using the redial list n When only 1 handset is registered:

1 Lift the handset. 2 MEN REDIAL 3 MbN: Select the desired entry. 4 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned on automatically and the call is made. n When 2 or more handsets are registered:

You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Making a call using the phonebook There must be at least 2 handsets registered to the base unit in order for the 28 For assistance, please visit http://shop.panasonic.com/support Making/Answering Calls Using the Base Unit Making cellular calls Important:

R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Before making calls, confirm that the R To correct a digit, press MCLEARN. corresponding CELL indicator on the base unit lights up (page 17). 1 Dial the phone number. 2 Press MCELL 1N or MCELL 2N. 3 When the other party answers, speak into 4 When you finish talking, press MZN. Note:

R While on a call, you can switch from the the microphone. base unit to the handset:

With the call sharing mode on

(page 48), press MCELLN*1 on the handset. a MbN: Select the desired cellular phone. a MSELECTN a Press MZN on the base unit. If the handset is on the base unit, simply lift it.

*1 The call is taken when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 22). Adjusting the speaker volume Press MDN or MCN repeatedly while talking. Note:

R The speaker volume you set is kept for each line (landline and cellular lines). Making a cellular call using the redial list The last 10 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MREDIALN 2 MbN: Select the desired phone number. 3 Press MCELL 1N or MCELL 2N. Erasing a number in the redial list 1 MREDIALN 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN 4 MEXITN MERASEN R To correct a digit, press MCLEARN. Making landline calls 1 Dial the phone number. 2 MZN 3 When the other party answers, speak into 4 When you finish talking, press MZN. Note:

R While on a call, you can switch from the the microphone. base unit to the handset:

Press M N on the handset, then press MZN on the base unit with the call sharing mode on (page 48). If the handset is on the base unit, simply lift it. Making a call using the redial list The last 10 phone numbers dialed are stored in the redial list (48 digits max. each). 1 MREDIALN 2 MbN: Select the desired entry. 3 MZN Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 40). For assistance, please visit http://shop.panasonic.com/support 29 Making/Answering Calls Using the Base Unit Example: If you need to dial the line access number 9 when making outside calls with a PBX:

1 9 a MPAUSEN 2 Dial the phone number. a MZN Note:

R A 3.5 second pause is inserted each time MPAUSEN is pressed. corresponding cellular phone. a MSELECTN

*1 The call is taken in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). To release hold on the landline:

Press MZN. R A handset user can take the call by pressing M N. Note:

R While a landline call is on hold, the SP-PHONE indicator flashes. R After holding for 10 minutes, the call is disconnected. Mute 1 Press MMUTEN during a call. R The SP-PHONE indicator flashes. 2 To return to the call, press MMUTEN. Note:

R To change the flash time, see page 48. For call waiting or Call Waiting Caller ID service users To use call waiting, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit Answering calls When a landline call is being received, the SP-PHONE indicator flashes rapidly. When a cellular call is being received, the CELL indicator and SP-PHONE indicator flash rapidly. 1 Press MZN when the unit rings. R You can also answer the cellular call by pressing MCELL 1N or MCELL 2N. 2 Speak into the microphone. 3 When you finish talking, press MZN. Adjusting the base unit ringer volume Press MDN or MCN repeatedly to select the desired volume while ringing. Note:

R You can adjust the ringer volume for cellular call and landline call by programming (page 49, 50). R The ringer volume you set is kept for each line (landline and cellular lines). Useful features during a call Hold 1 Press MHOLDN during an outside call. 2 To release hold on the cellular line:

Press MCELL 1N or MCELL 2N. R A handset user can take the call:

MCELLN*1 a MbN: Select the 30 For assistance, please visit http://shop.panasonic.com/support Making/Answering Calls Using the Base Unit that is in use after you hear the call waiting tone. 1 Press MCALL WAITN to answer the 2nd 2 To switch between calls, press MCALL call. WAITN. Note:

for a cellular line press MCELL 1N or MCELL for the landline press MZN. Note:

To page a specific handset, enter the To page all handsets, press 0 or wait handset number. for a few seconds. 2 Wait for the paged party to answer. R If paged party does not answer, press MINTERCOMN to return to the outside call. 3 To complete the transfer:

Press MZN. R The outside call is being routed to the handset. To establish a conference call:

Press MCONFN. R To leave the conference, press MZN. The other 2 parties can continue the conversation. R To put the outside call on hold, press MHOLDN. To resume the conference, press MCONFN. Transferring a cellular call between the base unit and a cellular phone Transferring a cellular call from the base unit to a cellular phone During a cellular call, press and hold MCELL 1N or MCELL 2N until the SP-PHONE indicator goes out. R The cellular call is transferred to the cellular phone. Transferring a cellular call from a cellular phone to the base unit During a conversation using a cellular phone, press MCELL 1N or MCELL 2N. R The cellular call is transferred to the base unit. Answering a 2nd call If you receive a call while talking on the phone, the interrupt tone sounds (page 50) and the 2nd callers information is displayed if you subscribe to Caller ID service (page 56). Answering a 2nd call during a landline call 1 Press MHOLDN during a landline call. For assistance, please visit http://shop.panasonic.com/support 31 Making/Answering Calls Using the Base Unit 2 To answer the 2nd call:

3 To hang up the 2nd call and return to the 1st call (landline call), press MZN 2 times. Press MCELL 1N or MCELL 2N. Answering a 2nd call during a cellular call 1 Press MHOLDN during a cellular call. 2 To answer the 2nd call:

3 To hang up the 2nd call and return to the MZN, MCELL 1N, or MCELL 2N 1st call (cellular call), press MZN, then press MCELL 1N or MCELL 2N. 32 For assistance, please visit http://shop.panasonic.com/support Intercom Intercom calls can be made:

between handsets between a handset and the base unit Note:

R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds

(page 46, 50). Handset: To finish intercom, press MOFFN. To answer the call, press M or MCELLN. N Base unit: To finish intercom, press MZN. To answer the call, press MZN again or the corresponding cellular line key (MCELL 1N or MCELL 2N). R To change the ringer volume and ringer tone for intercom, see page 46. Making an intercom call Handset 1 MMENUN a MbN: Intercom a 2 MbN: Select the desired unit or Voice MSELECTN paging. a MSELECTN R If you select Voice paging, speak into the microphone after the beep. Your voice will be heard using the speakers of the base unit and all handsets, until a paged party answers your page or until you press MOFFN. After the other party answers, the speakerphone mode is turned on. 3 When you finish talking, press MOFFN. Note:

R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. R You cannot use voice paging if other units are in use. R Voice paging is not available when a range extender (KX-TGA405) is registered to the base unit. Intercom Base unit 1 Press MINTERCOMN. When 2 or more handsets are registered:

To page a specific handset, enter the To page all handsets, press 0 or wait handset number. for a few seconds. 2 When you finish talking, press MZN. N to answer the page. Answering an intercom call Handset 1 Press M 2 When you finish talking, press MOFFN. Base unit 1 Press MZN to answer the page. 2 When you finish talking, press MZN. Turning auto intercom on/off This feature allows the handset or base unit to answer intercom calls automatically when it is N or called. You do not need to press M MZN. When this feature is set to On, the monitoring handset or base unit for the baby monitor feature (page 54) will also answer baby monitor calls automatically. The default setting is Off. Handset / Base unit 1 MMENUN#273 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit MSAVEN Handset: MOFFN Base unit: MEXITN Note:

R This feature is not available for all handsets paging and voice paging even if it is turned on. For assistance, please visit http://shop.panasonic.com/support 33 Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list:

when an incoming call is being received when an incoming call is being recorded by the answering system when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. situations shown above. Handset / Base unit 1 Press MCALL BLOCKN under the 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, Caller blocked is displayed, and then the call is disconnected. Note:

R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available:

for intercom calls or calls received by call waiting. when a landline call (or cellular call) is being received during a cellular call (or landline call). R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). Block a single number*1/Block a single #*2: The unit blocks calls from specific phone numbers stored in the call block list. Block range of numbers*1/Block range of #*2: The unit blocks calls that begin with a number stored in the call block Block unknown CID*1/Block list, such as a toll-free phone number prefix or certain area codes. unknown*2: The unit blocks calls that have no phone number.

*1 Handset

*2 Base unit Single phone numbers and ranges of numbers can be stored in the call block list up to 250 items in total. Blocking unwanted callers:

When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 If you do not want this one ring to sound, select No in Turning the first ring on/

off (page 36). Storing a single phone number Important:

R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list Handset n When a cellular phone is paired:

1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number:

MSELECTN a Press * (Edit) repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary

(24 digits max.). a MSAVEN a MOFFN 34 For assistance, please visit http://shop.panasonic.com/support n When a cellular phone is not paired:

1 MCN CID 2 MbN: Select the desired entry to be blocked. R To edit the number: MMENUN a MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN:

Call block a MSELECTN a Go to step 4. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary

(24 digits max.). a MSAVEN a MOFFN Base unit 1 MCIDN 2 MbN: Select the entry to be blocked. R To edit the number: Press MEDITN repeatedly until the phone number is shown in the 10-digit format. 3 MCALL BLOCKN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary (24 digits max.). a MSAVEN a MEXITN Adding call blocked numbers manually Handset 1 MCALL BLOCKN 2 MbN: Block a single number a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the phone number (24 digits max.). MSELECTN a MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block a single # a 3 MADDN MSELECTN Call Block 4 Enter the phone number (24 digits max.). a MSAVEN a MEXITN Storing a range of number Handset 1 MCALL BLOCKN 2 MbN: Block range of numbers a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). a MSELECTN MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block range of # a 3 MADDN 4 Enter the desired number (2-8 digits). a MSELECTN MSAVEN a MEXITN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. Handset 1 MCALL BLOCKN 2 MbN: Block unknown CID a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block unknown a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MEXITN For assistance, please visit http://shop.panasonic.com/support 35 Call Block Turning the first ring on/off You can choose whether the first ring sounds when a call is received. Yes (default): The first ring for all calls will be heard, including calls from blocked phone numbers. No: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers. Handset 1 MCALL BLOCKN 2 MbN: One ring for blocked call 3 MbN: Select the desired setting. a a MSELECTN MSAVEN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Ring once a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MEXITN Viewing/editing/erasing call block numbers Handset 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. 4 To edit a number:

R After viewing, press MOFFN to exit. MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:

MERASEN a MbN: Yes a MSELECTN a MOFFN 3 MbN: Select the desired entry. 4 To edit a number:

R After viewing, press MEXITN to exit. MEDITN a Edit the number. a MSAVEN a MEXITN To erase a number:

MERASEN a MbN: Yes a MSELECTN a MEXITN Note:

R When editing, press the desired dial key to add digits and press MCLEARN to erase digits. Erasing all call block numbers Handset 1 MCALL BLOCKN 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN Base unit 1 MCALL BLOCKN 2 MbN: Block a single # or Block MSELECTN range of # a MSELECTN 3 MERASEN 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MEXITN Base unit 1 MCALL BLOCKN 2 MbN: Block a single # or Block range of # a MSELECTN 36 For assistance, please visit http://shop.panasonic.com/support Phonebook You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 38). The following groups are available:

Group 1: Home*1 (default) Group 2: Cell 1*1 Group 3: Cell 2*1 Group 4-9: You can change the group name for each group.

*1 For groups 1-3, the group names cannot be changed. Important:

R All entries can be shared by the base unit and any registered handset. R You can copy phonebook entries from a Bluetooth cellular phone to the units phonebook (page 59). Adding phonebook entries Handset 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note:

R In step 3, you can switch the language for entering characters.

# a MbN: Select the desired language. a MOKN Entering characters Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. The following operations are also available. Phonebook Key

MFN MEN MCLEARN Operation Switch between the uppercase and lowercase

(A a) Move the cursor Erase the character or number R To erase all, press and hold it. R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 2 seconds after entering a character, the character is fixed and the cursor moves to the next space. Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. Handset n When a cellular phone is paired:

1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Save a MSELECTN 4 To store the name, continue from step MMENUN 3, Editing entries, page 39. n When a cellular phone is not paired:

1 MEN REDIAL 2 MbN: Select the desired entry. a 3 To store the name, continue from step MSAVEN 3, Editing entries, page 39. Base unit 1 MREDIALN 2 MbN: Select the desired entry. a MSAVEN a MEXITN Note:

R The name stored in the phonebook will be reflected in the redial list after you make a call using that phonebook entry. For assistance, please visit http://shop.panasonic.com/support 37 Phonebook Note for base unit:

R If you stored redial list number to the phonebook using the base unit, the entry is automatically assigned to Home. R If you want to edit the caller name or the group, you can do so using the handset

(page 39). Storing caller information to the phonebook Handset n When a cellular phone is paired:

1 MCN CID 2 MbN: Select the desired entry. a MSELECTN R To edit the number, press * (Edit) repeatedly until the phone number is shown in the desired format. 3 MSAVEN 4 MbN: Phonebook a MSELECTN 5 Continue from step 3, Editing entries, page 39. n When a cellular phone is not paired:

1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number:

MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN:

Phonebook a MSELECTN a Go to step 4. 3 MbN: Save phonebook a 4 Continue from step 3, Editing entries, MSELECTN page 39. Base unit 1 MCIDN 2 MbN: Select the desired entry. R To edit the number, press MEDITN repeatedly until the phone number is shown in the desired format. 3 MSAVEN 38 4 MbN: Phonebook a MSELECTN 5 MEXITN Note for base unit:

(page 39). Groups Groups can help you find entries in the phonebook quickly and easily. You can change the group name for groups 4-9

(Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Changing group names/setting ringer ID Handset 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a MSELECTN R If you selected Home, Cell 1, or Cell 2, go to step 5. 4 To change group names MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN 5 To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:

Select the desired ringer tone. a MSAVEN 6 MOFFN Finding and calling from a phonebook entry Once you have found the desired entry using one of the following 4 methods, make a call with your unit. For assistance, please visit http://shop.panasonic.com/support n Using a cellular line:

Handset 1 MCELLN R The unit starts dialing when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 22). 2 MbN: Select the desired cellular phone. a MSELECTN Base unit Press MCELL 1N or MCELL 2N. n Using a landline:

Handset N Base unit N M M Scrolling through all entries Handset / Base unit 1 Proceed with the operation for your unit. Handset: MFN W Base unit: MWN 2 MbN: Select the desired entry. Searching by first character Handset / Base unit 1 Proceed with the operation for your unit. Handset: MFN W Base unit: MWN 2 Press the dial key (0 9 or #) which contains the character you are searching for. 3 MbN: Scroll through the phonebook if necessary. Searching by query You can narrow down the search to enter the first characters of a name. Handset / Base unit 1 Proceed with the operation for your unit. Handset: MFN W a *

Phonebook Base unit: MWN a *

characters (up to 4) in uppercase. 2 To search for the name, enter the first 3 MOKN 4 MbN: Scroll through the phonebook if necessary. Note:

R In step 2, you can switch the language for entering characters.

# a MbN: Select the desired language. a MOKN Searching by group Handset / Base unit 1 Proceed with the operation for your unit. Handset: MFN W Base unit: MWN 2 MGROUPN 3 MbN: Select the group you want to search. a MSELECTN R If you select All groups, the unit ends the group search. 4 MbN: Select the desired entry. Editing entries Handset 1 Find the desired entry (page 38). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a 5 MbN: Select the desired group (page 38). MOKN a MSELECTN 2 times a MOFFN Erasing entries Erasing an entry Handset 1 Find the desired entry (page 38). 2 MMENUN a MbN: Erase a MSELECTN For assistance, please visit http://shop.panasonic.com/support 39 Phonebook 3 MbN: Yes a MSELECTN a MOFFN Base unit 1 Find the desired entry (page 38). 2 MERASEN a MbN: Yes a MSELECTN a MEXITN Erasing all entries MSELECTN Handset 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 3 MbN: Select the desired group. a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN Base unit 1 MWN a MERASEN 2 MbN: Select the desired group. a 3 MbN: Yes a MSELECTN 4 MbN: Yes a MSELECTN MSELECTN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. Handset / Base unit 1 Proceed with the operation for your unit. Handset: During an outside call, press MFN W. Base unit: During an outside call, press MWN. 2 MbN: Select the desired entry. 3 Press MCALLN to dial the number. Note:

R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 24). R If you have rotary/pulse service, you need to press * before pressing MFN W on the handset or MWNon the base unit in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding * to the beginning of phone numbers you wish to chain dial (page 37). Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys Handset n By entering phone numbers:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters 4 Enter the partys phone number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN n From the phonebook:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:

R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key. 40 For assistance, please visit http://shop.panasonic.com/support Phonebook Editing an entry Handset 1 Press and hold the desired speed dial key 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a

(1 to 9). a MMENUN MOKN a MSELECTN a MOFFN Erasing an entry Handset 1 Press and hold the desired speed dial key 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN

(1 to 9). a MMENUN Viewing an entry/Making a call Handset n Using a cellular line:

1 Press and hold the desired speed dial 2 MCELLN key (1 to 9). R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 3 MbN: Select the desired cellular phone. a MSELECTN n Using a landline:

1 Press and hold the desired speed dial 2 To make a call, press M key (1 to 9). N. For assistance, please visit http://shop.panasonic.com/support 41 Programming Menu list To access the features, there are 2 methods. Handset / Base unit n Scrolling through the display menus 1 MMENUN 2 Press MCN or MDN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. For available code:

Handset: see page 42. Base unit: see page 49. 2 Select the desired setting. a MSAVEN Note:

R To exit the operation, press MOFFN on the handset or MEXITN on the base unit. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table n Handset Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:

Operation Viewing the caller list. Answering device Sub-menu 2 Main menu:

Sub-menu 1 Play new message Play all message Erase all message*1 Settings Code

#280 Code

#213 Code

#323

#324

#325 38 56 66 66 67 42 For assistance, please visit http://shop.panasonic.com/support Sub-menu 1 Greeting New message alert*1 Sub-menu 2 Record greeting*1 Check greeting Pre-recorded*1

(Reset to pre-recorded greeting) Outgoing call On/Off Outgoing call Notification to Outgoing call Remote code Base unit beep Settings Ring count*1 Recording time*1 Remote code*1 Screen call Voicemail access*3 Answer on*1 Answer off*1 Main menu:

Operation Listening to voicemail messages. Intercom Main menu:

Operation Paging the desired unit. Settings On

<Off>

Activate

<Off>

Toll saver 2-7 rings

<4 rings>

<3 min>

1 min Greeting only*2

<111>

<On>Off Programming Code

#302

#303

#304

#338

#339

#211

#305

#306

#310

#327

#328 Code

#330 Code

#274 65 66 66 68 68 70 71 69 70 65 65 73 33 For assistance, please visit http://shop.panasonic.com/support 43 Bluetooth Programming Main menu:

Sub-menu 1 Link to cell 1:Add new device*4

(for CELL 1) 2:Add new device*4

(for CELL 2) Phonebook transfer Headset Sub-menu 2 Connect*1/

Disconnect*1 Ringer volume Ringer tone*7 Select unit to ring*1 Ring as cell

(limited)*1 Alert settings*1 Alert On/Off Alert settings*1 Voice alert Alert settings*1, *8 Alert tone Pair Unpair Add new device*4 Connect*1/

Disconnect*1 Pair Unpair Settings Off6 <6>

<Tone 2>*5

<Tone 4>*6

<All>

Handset 1-6

On (without Talking CID) Off

<On>Off

<Tone 1>*5

<Tone 2>*6 Code

#6251*5

#6252*6

#6281*5

#6282*6

#6291*5

#6292*6

#6271*5

#6272*6

#6141*5

#6142*6

#6101*5

#6102*6

#6031*5

#6032*6

#6041*5

#6042*6

#6241*5

#6242*6

#6111*5

#6112*6

#618

#621

#622

#621

#612 21 24 20 20 61 61 62 19 19 59 63 63 63 63 44 For assistance, please visit http://shop.panasonic.com/support Sub-menu 1 Settings Sub-menu 2 Auto connect*1 Cell area code*1 Cell line only mode*1 Cell line select Handset Cell line select Base unit*1 Set PIN*1 International code*1 Country code*1 Trunk prefix*1 Main menu:

Sub-menu 1 Date and time*1 Memo alarm Set date & time Sub-menu 2 Alarm13 Time adjustment*1, *9 Speed dial Main menu:

Operation Viewing the speed dial entry. Programming Settings Off

<1 min>

3 min 5 min 10 min On

<Off>

Cellphone 1*4 Cellphone 2*4

<Cellphone 1>*4 Cellphone 2*4

<0000>

Settings

<Off>

Once Daily Weekly

Manual Code

#632

#633

#157

#634

#G634

#619

#117

#118

#119 Code

#101

#720

#226 Code

#261 21 22 21 22 22 59 17 51 40 For assistance, please visit http://shop.panasonic.com/support 45 Programming Main menu:

Sub-menu 1 Ring adjustments Settings Sub-menu 2 Ringer volume

(Incoming)*3 Intercom ringer volume Ringer tone

(Incoming)*3, *7, *10 Intercom ringer tone*3, *7, *10 Interrupt tone*11 Silent mode On/Off Silent mode Start/End Silent mode Select group Date and time*1 Memo alarm Alarm13 Settings Off6 <6>

16 <6>

<On>Off On

<Off>

<11:00 PM/06:00 AM>

Home Cell 1 Cell 2 Group 4-9

<Off>

Once Daily Weekly

Manual

<On>Off Off

Every 3 hours Every 6 hours Code

#160

#175

#161

#163

#201

#238

#237

#241

#101

#720

#226

#162

#176 27 52 52 52 17 51 56 18 Set date & time Time adjustment*1, *9 Talking caller ID Low battery alert 46 For assistance, please visit http://shop.panasonic.com/support Sub-menu 2 Change name*1 Registration Sub-menu 1 Key detector setting*12 1:Add new device

(for Detector1)*13 2:Add new device

(for Detector2) 3:Add new device

(for Detector3) 4:Add new device

(for Detector4) Deregistration Call block*1 Speed dial Record greeting*1 Voicemail*3 LCD contrast

(Display contrast) Handset name Display name Auto intercom Key tone Caller ID edit

(Caller ID number auto edit) Block a single number Block range of numbers Block unknown CID

(CID: Caller ID) One ring for blocked call Save VM access#*1

(VM: Voicemail) VM tone detect*1 Settings Detector1 Detector2*14 Detector3*14 Detector4*14 Block

<Yes>

<On>Off Level 14 <2>

<Off>

<On>Off

<On>Off Programming Code

#6561

#6562*14

#6563*14

#6564*14

#6571

#6572*14

#6573*14

#6574*14

#6581

#6582*14

#6583*14

#6584*14

#217

#240

#173

#261

#302

#331

#332

#145

#104

#105

#273

#165

#214 34 35 35 36 40 65 72 72 55 55 33 57 For assistance, please visit http://shop.panasonic.com/support 47 Programming Sub-menu 1 Auto talk*15 Set tel line*3 Sub-menu 2 Set dial mode*1 Set flash time*1, *16 Call sharing*1 Registration Power failure Change language Set line mode*1, *17 Register handset Deregistration*2 Display Announcement*1 Customer support Main menu:

Operation Displaying customer support Web address. Baby monitor Main menu:

Sub-menu 1 On/Off Sensitivity level Sub-menu 2 Settings On

<Off>

<Tone>

Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms

<700 ms>

900 ms A <B>

<On>Off

<Auto>

Off

Espaol

Espaol Settings On

<Off>

Low

High Code

#200

#120

#121

#122

#194

#130

#131

#152

#110

#112 Code

#680 Code

#268

#269 24 18 25 26, 31 55 55 27 17 17 53 54 48 For assistance, please visit http://shop.panasonic.com/support Key detector*12 Sub-menu 2 Settings Main menu:

Sub-menu 1 Search Battery check n Base unit Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:

Operation Viewing the caller list. Main menu:

Sub-menu 1 Screen call Answer device Sub-menu 2 Bluetooth Main menu:

Sub-menu 1 Link to cell Cellular phone 1*4 Cellular phone 2*4 Headset*18 Cell line Sub-menu 2 Ringer volume Alert settings*1 Alert On/Off Alert settings*1 Voice alert Connect*1/

Disconnect*1

<Cellphone 1>*4 Cellphone 2*4 Settings

<On>Off Settings Off6 <1>

<On>Off

<On>Off Programming Code

#655 Code

#280 Code

#213 Code

#310 Code

#6281*5

#6282*6

#6101*5

#6102*6

#6031*5

#6032*6

#622

#634 38 56 70 30 61 61 22 For assistance, please visit http://shop.panasonic.com/support 49 Programming Main menu:

Sub-menu 1 Ring adjustments Settings Sub-menu 2 Ringer volume*3 Interrupt tone*11 Silent mode On/Off Silent mode Start/End Silent mode Select group Block a single #

Block range of #

Block unknown Ring once Settings Off6 <1>

<On>Off On

<Off>

<11:00 PM/

06:00 AM>

Home Cell 1 Cell 2 Group 4-9 On

<Off>

Block

<Yes>

No Level 16 <3>

<Off>

<On>Off

Espaol Talking CID Call block*1 LCD contrast

(Display contrast) Auto intercom Caller ID edit

(Caller ID number auto edit) Change language

(Display) Code

#160

#201

#238

#237

#241

#162

#217

#240

#173

#145

#273

#214

#110 Code

#680 27 52 52 52 56 34 35 35 36 33 57 17 Cust. Support Main menu:

Operation Displaying customer support Web address.

*1 If you program these settings using one of the units, you do not need to program the same

*2 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.

*3 When the cellular line only mode is turned on, these menus are not displayed (page 21).

*4 After the Bluetooth device is paired, the device name is displayed.

*5 For CELL 1

*6 For CELL 2 50 For assistance, please visit http://shop.panasonic.com/support Programming

*7 The preset melodies in this product (Tone 3 - Melody 10) are used with permission of

*8 The preset melodies in this product (Tone 1 and Tone 2) are used with permission of

*9 This feature allows the unit to automatically adjust the date and time each time caller 2009 Copyrights Vision Inc. 2013 Copyrights Vision Inc. information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 17).

*10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or

*11 This tone lets you know when you receive an outside call while you are on another line or an 2). If you select a melody, you cannot distinguish lines by their ringers. intercom call. If you select On, the tone sounds 2 times. manual for more information on the key detector.

*12 This setting is available when you have the key detector (KX-TGA20). Read the installation

*13 For models with supplied key detectors, the display shows 1: Detector1.

*14 If you register 2 or more key detectors.

*15 If you subscribe to a Caller ID service and want to view the callers information after lifting up

*16 The flash time depends on your telephone exchange or host PBX. Contact your PBX the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.

*17 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good.

*18 This setting is available when a cellular phone is paired. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals

(snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:

R Make sure the units date and time setting is correct (page 17). Handset 1 MMENUN#720 2 MbN: Select the desired alarm. a MSELECTN 3 MbN: Select the desired alarm option. a MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:

Enter the desired month and date. a MOKN For assistance, please visit http://shop.panasonic.com/support 51 Programming n Weekly:

MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN 7 Enter a text memo (10 characters max.). 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different a MOKN ringer tone from the one used for outside calls. a MSAVEN 9 MbN: Select the desired snooze setting. 10 MSELECTN a MOFFN Note:

R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature

(page 38), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important:

R Make sure the units date and time setting is correct (page 17). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off Handset 1 MMENUN#238 2 MbN: Select the desired setting. a exit. wish to start this feature. MSAVEN R If you select Off, press MOFFN to 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN Base unit 1 MMENUN#238 2 MbN: Select the desired setting. a exit. wish to start this feature. MSAVEN R If you select Off, press MEXITN to 3 Enter the desired hour and minute you 4 MAM/PMN: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 MN: Select AM or PM. 7 MSAVEN a MEXITN Changing the start and end time Handset / Base unit 1 MMENUN#237 2 Continue from step 3 for handset or step 3 for base unit, Turning silent mode on/

off, page 52. Selecting groups to bypass silent mode Handset / Base unit 1 MMENUN#241 52 For assistance, please visit http://shop.panasonic.com/support 2 MbN: Select the desired groups. a MSELECTN R group numbers. is displayed next to the selected R To cancel the selected group:

MbN: Select the group. a Press MSELECTN again. disappears. 3 MSAVEN 4 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or even while away from home. The monitored handset (placed in a babys room, for example) will automatically call the monitoring handset, base unit, or the phone number stored when it detects sound. Important:

R Before using this feature, we recommend that you test this feature and adjust the baby monitor sensitivity as needed, especially if you plan to monitor from outside. R This feature should not be used as a substitute for a medical or caregivers supervision. It is the caregivers responsibility to stay close enough to handle any eventuality. Note:

R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 49, 50). Programming Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a babys room). To monitor with a unit The internal baby monitor feature is available:

between handsets between a handset and the base unit Handset 1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select the desired units number to monitor with. a MSAVEN R Baby monitor will be displayed. R The registered units name/number is displayed. Note:

R When this feature is on, another handset or the base unit can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. This feature is only available for landline. Handset n From the phonebook:

1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select Outgoing call to monitor from outside. a MADDN 4 MbN: Phonebook a MSELECTN 5 MbN: Select the phonebook entry. a MSAVEN R Baby monitor will be displayed. For assistance, please visit http://shop.panasonic.com/support 53 Programming Note:

R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers:

1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select Outgoing call to monitor from outside. a MADDN 4 MbN: Manual a MSELECTN 5 Enter the desired name. a MOKN 6 Enter the desired number. a MOKN a MSELECTN R Baby monitor will be displayed. Note:

R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to On. Handset 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: Off a MSELECTN a MOFFN monitored. Editing an outside monitoring number monitored. Handset 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: On a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: Edit a MSELECTN 6 Edit the name if necessary. a MOKN 7 Edit the phone number if necessary. a MOKN a MSELECTN monitored. Erasing an outside monitoring number Handset 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: On a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: Erase a MSELECTN 6 MbN: Yes a MSELECTN a MOFFN Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. Handset 1 Press MMENUN on the handset being 2 MbN: Sensitivity level a 3 MbN: Select the desired setting. a MSELECTN monitored. MSAVEN a MOFFN Answering the baby monitor n When monitoring with a unit:

Handset: Press M N to answer a call. Base unit: Press MZN to answer a call. If you want to respond from the monitoring unit, press MMUTEN. R The monitoring unit will answer calls automatically when the auto intercom feature is set to On (page 33). Note:

R If you receive an outside call when communicating with the monitored handset, the interrupt tone sounds. To answer the call with the handset, press MOFFN, then press M N. 54 For assistance, please visit http://shop.panasonic.com/support To answer the call with the base unit, press MZN 3 times.*1

*1 If MMUTEN is pressed, press MZN 2 times. n When monitoring from outside:

Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note:

R The unit disconnects the call automatically after 2 minutes. Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 55). Handset 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. Handset 1 MMENUN#105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Programming Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:

R See page 5 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:

2 Base unit:

Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. MMENUN#130 3 Handset:

Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. Handset 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to 3 MbN: Yes a MSELECTN a MOFFN cancel. a MSELECTN For assistance, please visit http://shop.panasonic.com/support 55 Caller ID Service Using Caller ID service Important:

R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features Handset / Base unit When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:

Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller*1/Private*2:

The caller requests not to send caller information. Long distance*1/Long dist.*2:

The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier.

*1 Handset

*2 Base unit Missed calls Handset / Base unit If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:

R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:

A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Pressing MEXITN on the base unit. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:

subscribe to a Caller ID service of your phone service provider. turn this feature on (page 46, 50). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your phone service provider following every ring. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:

R Make sure the units date and time setting is correct (page 17). Viewing the caller list and calling back n Using a cellular line Handset 1 MCN CID 56 For assistance, please visit http://shop.panasonic.com/support 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press MSELECTN. 4 MCELLN To exit, press MOFFN. R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 5 MbN: Select the desired cellular phone. a MSELECTN Base unit 1 MCIDN 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press MCELL 1N or MCELL 2N. To exit, press MEXITN. n Using a landline Handset / Base unit 1 Proceed with the operation for your unit. Handset: MCN CID Base unit: MCIDN 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 Proceed with the operation for your unit. Handset:

To call back, press M To exit, press MOFFN. Base unit:

To call back, press MZN. To exit, press MEXITN. N. Note for handset and base unit:

R If the entry has already been viewed or answered, is displayed. R or indicates the caller information was received from the cellular line. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. Caller ID Service Handset n When a cellular phone is paired:

1 MCN CID 2 MbN: Select the desired entry. a 3 Press * (Edit) repeatedly until the MSELECTN phone number is shown in the desired format. 4 Using a cellular line:

To make a cellular call, continue from step 4, Viewing the caller list and calling back, page 56. Using a landline:

M N n When a cellular phone is not paired:

1 MCN CID 2 MbN: Select the desired entry. a 3 MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the MMENUN phone number is shown in the desired format. N 5 M Base unit 1 MCIDN 2 MbN: Select the desired entry. 3 Press MEDITN repeatedly until the phone number is shown in the desired format. 4 Using a cellular line:

Press MCELL 1N or MCELL 2N. Using a landline:

MZN Caller ID number auto edit feature Handset / Base unit Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:

For assistance, please visit http://shop.panasonic.com/support 57 Caller ID Service When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit (page 47, 50). The default setting is On. Note:

R Phone numbers from the 4 most recently edited area codes are automatically edited. Erasing selected caller information Handset / Base unit 1 Proceed with the operation for your unit. Handset: MCNCID Base unit: MCIDN 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN 4 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Erasing all caller information Handset / Base unit 1 Proceed with the operation for your unit. Handset: MCN CID Base unit: MCIDN 2 MERASEN a MbN: Yes a MSELECTN 3 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN 58 For assistance, please visit http://shop.panasonic.com/support Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones

(not paired) to the units phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important:

R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.) is stored as a separate entry with the same name. R If a phonebook entry includes additional data such as a picture, that entry may fail to copy to the base unit. R If your cellular phone includes international call entries, set the conversion codes before copying (page 59). 1 Handset:

2 Handset:

MMENUN#618 To copy from paired cellular phones:

MbN: Select the desired cellular phone. a MSELECTN R Copied items are stored to the group

(Cell 1 or Cell 2) which the cellular phone is paired to. To copy from other cellular phones

(not paired):

MbN: Other cell a MSELECTN a MbN: Select the group you want to copy to. a MSELECTN When Use the cell to transfer phone book is displayed:

Go to step 4. When Select mode menu is displayed:

MbN: Select Auto or Manual. a MSELECTN Auto: Download all entries from the cellular phone automatically. Go to step 5. 3 Handset:

4 Cellular phone:

Using Bluetooth Devices Manual: Copy entries you selected. R Select mode menu is displayed only when the cellular phone supports PBAP (Phone Book Access Profile) for Bluetooth connection. R Some cellular phones may require you to perform an operation on the cellular phone even if you select Auto. Follow the instructions of your cellular phone to copy phonebook entries. R For other cellular phones (not paired), you need to search for and select the base unit. The Bluetooth PIN (default:

0000) may be required. If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed. R The entries being copied are displayed on the handset. 5 Handset:

Wait until Completed is displayed. R You can continue copying other entries if necessary. 6 Handset: MOFFN Note:

R Some copied entries may have characters which are not available. These characters can be displayed but cannot be entered when editing an entry. R The unit does not support some characters. If a copied entry includes those characters, they are replaced with other available characters or H. R If you receive a call while copying phonebook entries, the copying procedure stops. Try again after finishing the call. Setting conversion codes You must first set the following 3 dialing codes before transferring the phonebook from your cellular phone (4 digits max. each). International code: An international prefix used when you make an international call. Country code: Your country code for international calls. For assistance, please visit http://shop.panasonic.com/support 59 Using Bluetooth Devices Trunk prefix: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. Handset 1 MMENUN 2 To store International code:

#117 To store Country code: #118 To store Trunk prefix: #119 3 Enter the desired number. a MSAVEN a MOFFN Note:

R After you copy the entries, confirm that the numbers were transferred correctly. Link to Cell app For Android users The free Link to Cell app helps you integrate your Android phone with your DECT phone for convenient use. Important:

R Your cellular phone must support Serial Port Profile (SPP) specification.

[Cell line only mode] (page 21)

[International code], [Country code], and [Trunk prefix] (page 59)

*1 When your paired Android phone is within the base units range, the date and time information is updated on the handset and base units display, if time adjustment feature is activated on your Android phone. Installing the Link to Cell app Download links are also available at the web page below. www.panasonic.net/pcc/support/tel/

appalerts n Application (App) Alerts On/Off This feature alerts your DECT phone when your paired Android phone receives the following alert information:

[Google Calendar]

[Email]

[Gmail]

[Text messages]

[Facebook]

[Twitter]

[Instagram]

[Low Battery] information You can turn each type of alert on or off using the Link to Cell app. If you turn the alerting app on, your DECT phone alerts you with the corresponding information. n Phone Settings Using your paired Android phone, you can program your Phone Settings for the following features:

[Time adjustment]*1 Starting the app for the first time 1 Make sure that your Android devices Bluetooth feature is turned on and that your Android device is paired to the base unit. icon. 2 Start the Link to Cell app by tapping its 3 Follow the on-screen instructions. Important:

R For further information, refer to the instructions on web page listed above. R To use this feature, the following settings are required. Android phone: Bluetooth must be turned on. 60 For assistance, please visit http://shop.panasonic.com/support Android phone: [Application Alerts manager]*1 must be turned on. Handset or base unit: Alert On/

Off must be turned on (page 61). R If this feature does not work, turn on your devices Bluetooth feature, unplug the base units AC adaptor, and then reconnect it.

*1 Turning on [Application Alerts manager]

Use the following procedure after installing the Link to Cell app. Android 2.x: Open your devices

[Settings] app. a Tap [Accessibility]. a Turn on the [Accessibility] and

[Application Alerts manager]

checkboxes. Android 4.x: Open your devices

[Settings] app. a Tap [Accessibility]. a Turn on [Application Alerts manager]. Requirements R An Android device (Android 2.1 or later) Text message (SMS) alert For iPhone and BlackBerry users This feature alerts you on your DECT phone when your paired cellular phone receives SMS messages. The Link to Cell app is not required for iPhone and BlackBerry users. Important:

R Your cellular phone must support Message Access Profile (MAP) specification. R For further information, refer to the instructions on web page listed below:

www.panasonic.net/pcc/support/tel/sms/

R To use this feature, the following settings are required:

iPhone and BlackBerry Phone:

Bluetooth must be turned on. Handset or base unit: Alert On/

Off must be turned on (page 61). R If this feature does not work, turn on your devices Bluetooth feature, unplug the base units AC adaptor, and then reconnect it. Using Bluetooth Devices Alert settings for your DECT phone If your cellular phone is paired to the base unit and receives notifications, the handset and/or base unit can alert you:

by briefly displaying a message by announcement by sounding alert tones Important:

R For Android users: Use the Link to Cell app to enable the desired alerts (page 60). Turning alert on/off Once this feature is turned on, it will alert you on the handset and base unit when your cellular phone receives notifications. On (default): The handset and/or base Off: The handset and/or base unit do You can configure this setting using either the base unit or one of the handsets. unit alert you. not alert you. Handset / Base unit 1 For CELL 1: MMENUN#6101 For CELL 2: MMENUN#6102 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN Handset: MOFFN Base unit: MEXITN Setting the voice alert You can turn on/off the voice alert. On (default): The handset and/or base unit notify you by voice announcement. Off: Voice announcement is not You can configure this setting using either the base unit or one of the handsets. available as alert. Handset / Base unit 1 For CELL 1: MMENUN#6031 For CELL 2: MMENUN#6032 For assistance, please visit http://shop.panasonic.com/support 61 Using Bluetooth Devices 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN Handset: MOFFN Base unit: MEXITN Selecting the alert tone Handset 1 For CELL 1: MMENUN#6041 For CELL 2: MMENUN#6042 2 MbN: Select the desired setting. a MSAVEN a MOFFN Remote voice assist For iPhone and Android smartphone users You can use the handset or base unit to operate the voice recognition feature of your cellular phone (Siri, Google Now, or S Voice). For example, you can speak into the handset or base unit and command your cellular phone to make a call. Compatible voice recognition features R Google Now (Android 4.0 or later) R S Voice (Android 4.0 or later) R Siri (iOS 8.0 or later) Important:

R Your cellular phone must support the Hands Free Profile (HFP) specification. R In order to use this feature, the voice recognition feature of your cellular phone must be turned on. R This feature may not be available when your cellular phone is in use. R This feature is limited to the spoken commands that are recognized by your cellular phone. For information about the available commands, refer to the operating instructions of your cellular phone. R This feature may not be available when your cellular phone is locked. Activating remote voice assist Handset 1 M N R Go to step 3 in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 2 MbN: Select the desired cellular phone. a 3 Wait until Voice assist is displayed. MSELECTN R A confirmation tone sounds. R Speakerphone is turned on automatically. R To switch to the receiver, press MZN. 4 Speak your commands to your handset. R When you have finished using remote voice assist, press MOFFN. Base unit 1 M N R Go to step 3 in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 2 Press MCELL 1N or MCELL 2N 3 Wait until Voice comm is displayed. R A confirmation tone sounds. R Speakerphone is turned on automatically. 4 Speak your commands to your base unit. R When you have finished using remote voice assist, press MEXITN. Note:

R For Android users: Depending on your cellular phone, you may need to set Google Now or S voice as your cellular phone's default voice recognition feature. For more information, refer to the operating instructions of your cellular phone. R While using this feature, you cannot use another unit to make a cellular call using the same cellular line. R You cannot use this feature while talking on a landline call. 62 For assistance, please visit http://shop.panasonic.com/support R If you receive a call on the landline or on another cellular line while using this feature, the interrupt tone sounds. R If you receive a call on the same cellular line while using this feature, voice recognition ends. Using a Bluetooth headset

(optional) By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on landline calls. Important:

R Your Bluetooth headset must support the HeadSet Profile (HSP) specification. R Only 1 Bluetooth headset can be paired to the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R For best performance, we recommend using your Bluetooth headset within 1 m

(3.3 feet) of the base unit. The base unit can communicate with Bluetooth headsets within an approximately 10 m (33 feet).

*1 You cannot use a Bluetooth headset to talk on a cellular line. Pairing a Bluetooth headset to the base unit Important:

R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Bluetooth headset:

Set your headset to pairing mode. R Refer to the headsets operating instructions. MMENUN#621 2 Handset:

3 If your headset PIN is 0000, go to step 4. If your headset PIN is not 0000, press MCLEARN, then enter your headset PIN. Using Bluetooth Devices R Typically, default PIN is 0000. Refer to the headsets operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When is displayed on the base unit, the headset is available for use. Connecting/disconnecting a Bluetooth headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important:

R Make sure that the headset is turned on. Handset / Base unit 1 To connect/disconnect:

MMENUN#622 R A long beep sounds. 2 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Unpairing a Bluetooth headset You can cancel a pairing of the headset that is stored to the base unit. Handset 1 MMENUN#612 2 MbN: Yes a MSELECTN R When the headset is unpaired, the disappears from the base unit display. 3 MOFFN Operating a Bluetooth wireless headset using a landline Important:

R Refer to your headsets operating instructions for headset operations. For assistance, please visit http://shop.panasonic.com/support 63 during a landline call with the base unit during an intercom call between the base speakerphone. unit and handset. while listening to messages recorded on the base unit answering system. Press M n To switch to your headset:

N on the base unit. n To switch to the base unit:

Press MZN on the base unit. Adjusting your headset receiver volume Base unit Press MDN or MCN repeatedly while using your headset. Note:

R Depending on your headset, the receiver volume may not be adjustable. Using Bluetooth Devices R Some features described here may not be available depending on a Bluetooth wireless headset. Making landline calls with your headset Base unit 1 Press your headsets button referring to your headsets operating instructions. 2 Dial the phone number using the base unit after hearing the dial tone on your headset. 3 When you finish talking, press your headsets button referring to your headset s operating instructions. Answering landline calls with your headset To answer a landline call, press your headsets button. When you finish talking, press your headsets button. Note:

R If you cannot hang up the call using your headset, press MZN on the base unit 2 times. Call sharing between your headset and the handset Important:

R To activate this feature, you should set call sharing mode to on beforehand (page 48). n While the handset is on a landline call:

To join the conversation with your headset, press your headsets button. n While your headset is on a landline call:

To join the conversation with the handset, press M N. Switching between the base unit and your headset You can switch between the base unit and your headset:

64 For assistance, please visit http://shop.panasonic.com/support Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 71). Important:

R Make sure the units date and time setting is correct (page 17). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes. A maximum of 64 messages can be recorded. Note:

R When message memory becomes full:

Messages full is shown on the The ANSWER ON/OFF indicator on the base unit flashes rapidly if the answering system is turned on. handset and base unit display. If you use the pre-recorded greeting message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Answering System for Landline Handset 1 To turn on:

MMENUN#327 To turn off:

MMENUN#328 2 MOFFN Note for base unit and handset:

R When the answering system is turned on, the ANSWER ON/OFF indicator on the base unit lights up. Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:

your own greeting message a pre-recorded greeting message Recording your greeting message Handset 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:

If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. If the message recording time (page 71) For assistance, please visit http://shop.panasonic.com/support 65 Answering System for Landline Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. Handset 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message Handset 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Important:

R When using the base unit or handset to listen to messages, the noise reduction feature (page 25) is activated automatically in spite of the setting (

displayed). is not Key M N N N (STOP) M M MERASEN Operation Repeat message*1 Skip message Stop playback Erase currently playing message

*1 If pressed within the first 5 seconds of a message, the previous message is played. Calling back (Caller ID subscribers only) n Using a landline:

Press MZN during playback. R To edit the number before calling back, press MEDITN repeatedly until the phone number is shown in the desired format

(page 57). n Using a cellular line:

Press MCELL 1N or MCELL 2N during playback. To edit the number before calling back, press MEDITN repeatedly until the phone number is shown in the desired format (page 57). Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the base unit When new messages have been recorded:

N on the base unit flashes. M New message is displayed. N (PLAY). Press M R During playback, M N on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:

MMENUN#323 To listen to all messages:

MMENUN#324 2 When finished, press MOFFN. Note:

R To switch to the receiver, press M R You can also use the MPLAYN soft key, if N. displayed, to play new messages. Key MDN or MCN 66 Operation Adjust the speaker volume Operating the answering system MMENUN a MbN: Answering device a MSELECTN For assistance, please visit http://shop.panasonic.com/support Key MDN or MCN 1 or MFN 2 or MEN 3 4 5 6 76 8 MPAUSEN 9 or MSTOPN 0

*4*3

*6 Operation Adjust the receiver/speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Pause message*2 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages Reset to a pre-recorded greeting message

*1 If pressed within the first 5 seconds of a

*2 To resume playback:

message, the previous message is played. MbN: Playback a MSELECTN

*3 You can also erase as follows:

MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Answering System for Landline 2 MbN: Call back (Cell) a MSELECTN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 3 MbN: Select the desired cellular phone. a MSELECTN Editing the number before calling back n Using a landline:

1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format

(page 57). N 4 M n Using a cellular line:

1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format

(page 57). 4 MCELLN R The unit starts dialing immediately in the following situations. Only 1 cellular phone is paired. A specific line is set to make cellular calls (page 22). 5 MbN: Select the desired cellular phone. a MSELECTN Calling back (Caller ID subscribers only) n Using a landline:

1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN n Using a cellular line:

1 Press MPAUSEN during playback. Erasing all messages 1 MMENUN#325 2 MbN: Yes a MSELECTN a MOFFN For assistance, please visit http://shop.panasonic.com/support 67 Answering System for Landline Advanced new message alerting features Audible message alert This feature allows the base unit to beep to inform you of a new message arrival when new messages are recorded. The base unit beeps 2 times every minute until you listen to the messages, if the Base unit beep setting is turned on. The default setting is Off. Handset 1 MMENUN#339 2 MbN: Select the desired setting. a MSAVEN a MOFFN New message alert by a call This feature allows you to receive a notification by phone when new messages are recorded. The base unit calls a phone number you specify. You can then operate the answering system remotely to listen to the new message. To use this feature, you must:

store a phone number to which the unit makes the call to. turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call

(page 69). This feature is only available for landline. Important:

R A new message alert is stopped 1 minute after the unit starts to call. The unit will not retry the call even if the call is not answered. Storing a phone number to which the unit makes an alert call Handset n From the phonebook:

1 MMENUN#338 MSELECTN a MADDN 2 MbN: Notification to a 3 MbN: Phonebook a MSELECTN 4 MbN: Select the desired phonebook entry. a MSAVEN a MOFFN n By entering a phone number:

MSELECTN a MADDN 1 MMENUN#338 2 MbN: Notification to a 3 MbN: Manual a MSELECTN 4 Enter the desired name (16 characters 5 Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN Turning on/off the new message alert setting Handset 1 MMENUN#338 2 MbN: On/Off a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Editing the set phone number Handset 1 MMENUN#338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Edit a MSELECTN 4 Edit the name if necessary (16 characters 5 Edit the phone number if necessary (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN Erasing the set phone number Handset 1 MMENUN#338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Erase a MSELECTN 68 For assistance, please visit http://shop.panasonic.com/support 4 MbN: Yes a MSELECTN a MOFFN R The new message alert setting is turned off. Activating/inactivating the remote access code to play messages If you activate this feature, you must enter the remote access code (page 69) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is Inactivate. Inactivate: You can listen to the message by pressing 4 to play new messages (without entering the remote access code). Activate: You must enter your remote access code and then press 4 to play new message. Handset 1 MMENUN#338 2 MbN: Remote code a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to messages After you answer the new message alert, you can listen to the messages as follows. n When the remote access code is set to n When the remote access code is set to Inactivate:

Press 4 to play the new message during the announcement. Activate:

1 Enter the remote access code

(page 69) during the announcement. 2 Press 4 to play the new message. Note:

R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show Answering System for Landline the record. However, on the base unit redial list it is shown as Message alert. Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:

R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. Handset 1 MMENUN#306 2 Enter the desired 3-digit remote access code. a MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 69. R The entered remote access code is deleted. Using the answering system remotely 1 Dial your landline phone number from a 2 After the greeting message starts, enter 3 Follow the voice guidance prompts as your remote access code. touch-tone phone. necessary or control the unit using remote commands (page 70). 4 When finished, hang up. For assistance, please visit http://shop.panasonic.com/support 69 Answering System for Landline Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 70). Note:

R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key 1 2 4 5 9 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0

*4 Erase currently playing message

*5 Erase all messages

*# End remote operation

(or hang up)

*1 If pressed within the first 5 seconds of a message, the previous message is played.

*2 For English voice guidance only

*3 For Spanish voice guidance only touch-tone phone. Turning on the answering system remotely 1 Dial your phone number from a 2 Let the phone ring 15 times. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 69). R A long beep is heard. Answering system settings Call screening Handset / Base unit While a caller is leaving a message, you can listen to the call through the units speaker. To adjust the speaker volume, press MDN or MCN repeatedly. You can answer the call by pressing M the handset or MZN on the base unit. Call screening can be set for each unit. The default setting is On. 1 MMENUN#310 2 MbN: Select the desired setting. a 3 Proceed with the operation for your unit. MSAVEN N on Handset: MOFFN Base unit: MEXITN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end 70 For assistance, please visit http://shop.panasonic.com/support Answering System for Landline of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 69), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. Handset 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. Handset 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 71. Note:

R When you select Greeting only:

the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 65). For assistance, please visit http://shop.panasonic.com/support 71 Useful Information Voicemail service for landline In addition to your units answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit's answering system. R To use the voicemail service rather than the units answering system, turn off the answering system (page 65). If you have units answering system set to on and also the voicemail enabled, the system with least amount of rings will record the message first. Example:

If the units answering system is set to 4 rings

(page 70) and the voicemail answering system provided by your phone company is set to 6 rings (call your service provider), the units answering system will record the incoming call first. Storing the voicemail (VM) access number In order to listen to your voicemail messages, you must dial your phone service providers voicemail access number. Once you have stored your voicemail access number, you can dial it automatically (page 73). Handset 1 MMENUN#331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:

R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 24) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Example:

To erase the voicemail access number Handset 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Handset / Base unit Your phone service provider sends special signals (sometimes called voicemail tones or stutter tones) to the unit to let you know you have new voicemail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M N on the handset or press MZN on the base unit, you have new voicemail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voicemail messages have been recorded. Turn this feature off when:

You do not subscribe to voicemail service. Your phone service provider does not send voicemail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your phone service provider. Turning VM tone detection on/off The default setting is On. Handset 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN 72 For assistance, please visit http://shop.panasonic.com/support 1-222-333-4444VM access numberPausesPasswordPPPP8888 Listening to voicemail messages When new messages have been recorded, Voicemail msg. via phone co.*1/

Voicemail msg.*2 are displayed if message indication service is available.

*1 Handset

*2 Base unit R The speakerphone turns on. Handset 1 MMENUN#330 2 Follow the pre-recorded instructions. 3 When finished, hang up. Note:

R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. Base unit To listen to voicemail messages, you have to dial your voicemail access number manually. Note for handset and base unit:

R If the handset and base unit still indicate there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset or base unit beeps. Useful Information Wall mounting The base unit can be mounted on a wall by revolving the bracket to WALL position

(default: DESK stand position). Note:

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Base unit 1 Turn the bracket 180 degrees counterclockwise in the WALL direction until a click is heard. R The bracket cannot be removed. Do not turn the bracket more than 180 degrees. 2 Tuck in the telephone line cord (A). Connect the AC adaptor cord and telephone line cord (B). Hook For assistance, please visit http://shop.panasonic.com/support 73 1AB1 Useful Information 3 Mount the unit on a wall then slide down to secure in place. R This product is compliant with the following wall phone plate sizes (2 types). 83 mm (3 1/4 inches) 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (

) respectively.

) and (

To stand on a desk Turn the bracket 180 degrees clockwise from the WALL position to the DESK direction until a click is heard. Charger Drive the screws (

wall. 27.2 mm (1 1/16 inches)

) (not supplied) into the 74 For assistance, please visit http://shop.panasonic.com/support 12343434121212 Error messages Display message Ask phone company for VM access #

Main unit no power orNo link. Re-

connect base AC adaptor. orNo link. Busy Check tel line Error!!

Failed Useful Information Cause/solution R You have not stored the voicemail access number. Store the number (page 72). R Confirm the base units AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. Re-register the handset (page 55). R The handsets registration may have been canceled. R When No link. is displayed during a power failure, place a handset on the base unit to supply power to the base unit. R No cellular phone is paired to the base unit. Pair a cellular phone (page 19). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The voice recognition feature could not be activated. Try again later. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 12). R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode

(page 21). R Recording was too short. Try again. R Someone is using a cellular line or headset. Try again later. R The phonebook copy is incomplete (page 59). The cellular phone is disconnected from the base unit. Make sure that other Bluetooth devices are not connected to the cellular phone, and try again. R Although the unit tried to connect to the cellular phone or headset, the connection has been failed. Someone is using a cellular line or headset. Try again later. Make sure that the cellular phone or headset is not connected to other Bluetooth devices. For assistance, please visit http://shop.panasonic.com/support 75 Useful Information Display message Invalid Requires subscription to Caller ID. Use rechargeable battery. Cause/solution R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 55). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 5, 9. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. I cannot pair a cellular phone to the base unit. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 12). R Fully charge the batteries (page 13). R Check the connections (page 12). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 55). R Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. R Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from your cellular phone. R Some cellular phones may require you to enter the Bluetooth PIN to pairing. Confirm that you entered the correct PIN. 76 For assistance, please visit http://shop.panasonic.com/support Problem I cannot connect a cellular phone to the base unit. I cannot hear a dial tone. Useful Information Cause/solution R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range

(page 16). it on. R Your cellular phones Bluetooth feature is turned off. Turn R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually (page 21). R The cellular phone has not been paired to the base unit. Pair the cellular phone (page 19). R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset or other Panasonic DECT phone, disconnect the device, then perform the connecting procedure to the base unit. R If your cellular phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone. R Make sure that the CELL indicator lights up (page 17). R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. The base unit beeps. R New messages have been recorded. Listen to the new messages (page 66). Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Battery recharge Problem The handset beeps and/or flashes. Cause/solution R Change the display language (page 17). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 55). Cause/solution R Battery charge is low. Fully charge the batteries (page 13). For assistance, please visit http://shop.panasonic.com/support 77 Useful Information Problem I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. Cause/solution R Clean the battery ends (

) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 12). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. I cannot make local calls with the handset or base unit using a cellular line. I cannot make or answer cellular calls with the handset or base unit. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it

(page 55). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume for landline is turned off. Adjust the ringer volume (page 24, 30, 46, 50). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 24, 30, 44, 49). R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 20. R Silent mode is turned on. Turn it off (page 52, 50). R The ringer volume is turned off by pressing and holding

). Press and hold 0 (

) again to turn it on 0 (

(page 24). R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 22). R Depending on the cellular phones compatibility (page 6), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit (page 21). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The cellular phone is being used separately from your system. 78 For assistance, please visit http://shop.panasonic.com/support Problem I can make and answer cellular calls but cannot hear a sound. I cannot switch cellular calls from the unit to the cellular phone. I cannot make a call using a landline. I cannot use a cellular line or a landline. I cannot make long distance calls. I cannot use voice paging. Caller ID/Talking Caller ID Problem Caller information is not displayed. Caller information is displayed or announced late. Useful Information Cause/solution R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and try again. R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone. R The dialing mode may be set incorrectly. Change the setting (page 18). R The unit can be used to talk on 2 lines at the same time

(for example, 2 cellular lines, or the landline and 1 cellular line). R Make sure that you have long distance service. R You cannot use voice paging if other units are in use. R Voice paging is not available when a range extender

(KX-TGA405) is registered to the base unit. Cause/solution R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service for landline calls may not be available in some areas. Contact your phone service provider for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. R Depending on your phone service provider, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. For assistance, please visit http://shop.panasonic.com/support 79 Useful Information Problem Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. The 2nd callers information is not displayed during an outside call. Cause/solution R The ringer volume for landline is turned off. Adjust the ringer volume (page 46, 50). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 44, 49). R The unit which is not selected to ring for cellular calls does not announce caller information. To change the selection, see page 20. R The Talking Caller ID feature is turned off. Turn it on R The ring as cell mode is set to On (without Talking R The number of rings for the answering system is set to 2

(page 46, 50). CID). To change the mode, see page 20. rings or Toll saver. Select a different setting

(page 70). R Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call. R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 47, 50). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 57). changes the time. Set the time adjustment to Manual

(off) (page 46). R Incorrect time information from incoming Caller ID R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). 80 For assistance, please visit http://shop.panasonic.com/support Using Bluetooth devices Problem I cannot copy phonebook entries from a cellular phone. I cannot have a conversation using the headset. or I cannot connect my headset to the base unit. Useful Information Cause/solution R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone. R Someone is using a cellular line or headset. Try again later. R Turn the cellular phone off, then turn it on and try again. R If an entry is already stored in the units phonebook, the entry cannot be copied even by selecting another group. R iPhone does not support individual phonebook copy. R Confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. R Your Bluetooth headset is not paired. Pair it (page 63). R Turn your headset off, then turn it on and try again. R If your headset is already connected to another Bluetooth device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). Noise is heard during a call on the headset. Some headset enhanced features are not available. An error tone is heard when I try to program the Bluetooth feature. R A Bluetooth headset can communicate with the base unit within a range of approximately 10 m (33 feet). The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the base unit. R The base unit does not support enhanced features such as Last number redial or Call reject. R The Bluetooth feature cannot be accessed immediately after connecting the AC adaptor to the base unit. Wait a few seconds and try again. R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again. For assistance, please visit http://shop.panasonic.com/support 81 Useful Information Problem App alert is not displayed or announced. or Text message alert is not displayed or announced. Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. Cause/solution R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. your Android phone is turned on. R Confirm that the [Application Alerts manager] setting of R Alert On/Off is set to Off. Set it to On R Voice alert is set to Off. Set it to On (page 61). R The Bluetooth devices Bluetooth notifications setting is

(page 61). R The handset selected to display and/or announce alerts is R The Bluetooth device or its corresponding cellular line is R Your cellular phones Bluetooth feature is turned off. Turn turned off. in use. in use. it on. R The unit which is not selected to ring for cellular calls does not ring. To change the selection, see page 20. Cause/solution R The answering system is turned off. Turn it on (page 65). R The answering system does not answer or record calls from cellular lines. the setting (page 71). messages (page 66, 67). R The message memory is full. Erase unnecessary R The recording time is set to Greeting only. Change R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 70) to a lower value, or contact your phone service provider. R The answering system will not answer incoming calls while the other devices such as headset or handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 69). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code

(page 69). R The answering system is turned off. Turn it on (page 70). R You cannot operate the answering system when calling a cellular phone paired to the base unit. 82 For assistance, please visit http://shop.panasonic.com/support Problem The unit does not emit the specified number of rings. Cause/solution R If the first ring is turned off (No) (page 36), the number of rings decreases by 1 from the specified number of rings. Useful Information Bluetooth PIN Problem I cannot remember the PIN. Voicemail Problem Voicemail msg. via phone co. is shown on the handset display. orVoicemail msg. is shown on the base unit display. How do I remove this message from the display?

Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Change the PIN using the following method. 1 MMENUN#619 2 *7000 3 Enter the new 4-digit PIN. a MOKN 4 Enter the new 4-digit PIN again. a MSAVEN a MOFFN Cause/solution R This notification is displayed when your phone service providers voicemail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:

R To avoid permanent damage, do not use a microwave oven to speed up the drying process. For assistance, please visit http://shop.panasonic.com/support 83 Useful Information FCC and other information 84 For assistance, please visit http://shop.panasonic.com/support This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information For assistance, please visit http://shop.panasonic.com/support 85 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, move the cordless telephone further away from the TV or VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:L This product complies with FCC radiation exposure limits set forth for an uncontrolled environment. L To comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. L This product may not be collocated or operated in conjunction with any other antenna or transmitter.L The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information 86 For assistance, please visit http://shop.panasonic.com/support Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 87 Conexiones1 Conecte el adaptador de corriente alterna a la toma de corriente.Unidad base1 Conecte el adaptador de corriente alterna a la unidad presionndolo firmemente.2 Enganche el cable para fijarlo.3 Conecte el adaptador de corriente alterna a la toma de corriente.4 Conecte el cable de la lnea telefnica a la unidad, y despus a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.Nota:LUse solo el adaptador de corriente alterna Panasonic PNLV226 que se suministra.445312Cargador1 Gua Rpida Espaola 88 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Instalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tamao AAA (R03) ().LNO utilice bateras alcalinas, de manganeso ni de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla.LConfirme que aparezca Cargando ().Retire la batera2142311212 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 89 Sugerencias de operacinTeclas de funcinAl oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin.Tecla navegadoraAuricular:{^}, {V}, {<} o {>}: Navegue por diversas listas y elementos.VOL. (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.{<} k: Vea la entrada del directorio telefnico.{>} REDIAL (Remarcacin): Vea la lista de remarcacin.{V} CID (Identificador de llamadas): Vea la lista de personas que llamaron.Unidad base:{^}, {V}, {7} o {8}: Navegue por diversas listas y elementos.VOLUME (Volumen: {^} o {V}): Ajuste el volumen del altavoz mientras habla.{7}/{8}: Repetir u omitir mensajes durante la reproduccin.AuricularUnidad base{V}{^}{<}{>}{V}{^}{7}{8} Gua Rpida Espaola 90 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Cambio de idiomas (predeterminado: English)Cuando instale las bateras por primera vez, es posible que aparezca Set date/time Press SELECT. Oprima {OFF} para salir.Idioma de la pantalla (Auricular/Unidad base)1{MENU}(11) s {r}: Espaol 2Contine operando su unidad.Auricular: {GUARDAR} s {OFF}Unidad base: {GUARDA} s {EXIT}Idioma de la gua de voz (Auricular){MENU}(112 s {r}: Espaol s {GUARDAR} s {OFF}Fecha y hora (Auricular)1{MENU}(1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales (formato de reloj de 24 horas).4{GUARDAR} s {OFF}Cmo grabar el mensaje de saludo del contestador de llamadas para la lnea terrestre (Auricular)Puede grabar su propio mensaje de saludo en lugar de usar uno pregrabado.1{MENU}(3)2 s {r}: S s {SELEC.}2Despus de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20cm (8pulgadas) y hable con claridad en el micrfono (mx. de 2 minutos).3Oprima {PARAR} para dejar de grabar. s {OFF}Enlace a celularPuede conectar su unidad base y telfono celular usando la tecnologa inalmbrica Bluetooth, para poder hacer o responder llamadas a su telfono celular usando su sistema telefnico. Para obtener ms detalles, visite nuestro sitio web: http://shop.panasonic.com/bluetooth-phoneLColoque su telfono celular cerca de la unidad base. Si su telfono celular est demasiado cerca de la unidad base durante la llamada celular, es posible que escuche ruido. Para un mejor funcionamiento, le recomendamos que coloque su telfono celular de 0.6 m a 3 m (2 pies a 10 pies) de la unidad base.1 Lnea celular2 Proveedores de servicios de telefona celularMarcas registradasLLa marca denominativa y los logotipos de Bluetooth son marcas registradas de Bluetooth SIG, Inc., y cualquier uso de dichas marcas por parte de Panasonic Corporation se hace bajo licencia.LTodas las dems marcas comerciales que se identifican en el presente pertenecen a sus respectivos propietarios.12 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 91 Cmo emparejar un telfono celular con Bluetooth1Unidad base:Oprima y mantenga oprimido {CELL 1} o {CELL 2} durante unos segundos.LDespus de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.2Su telfono celular:Mientras el indicador de CELL correspondiente est parpadeando, siga las instrucciones de su telfono celular para entrar al modo de emparejamiento.LDependiendo de su telfono celular, es posible que le pida que introduzca el NIP de Bluetooth (predeterminado: 0000). Si su telfono celular muestra la confirmacin de la PassKey en su pantalla, siga las instrucciones para continuar.3Unidad base:Espere a que se emita un pitido largo.LEs posible que tarde ms de 10 segundos en completar el emparejamiento.LCuando el indicador de CELL correspondiente se ilumina, esto significa que el telfono celular est conectado a la unidad base. Ya est listo para hacer llamadas regulares de celular.4{EXIT}Nota:LAsegrese de que su telfono celular est configurado para conectarse a este producto automticamente. Consulte las instrucciones de operacin de su telfono celular.Unidad base: Indicadores de CELLodacifingiSodatsEEncendidoUn telfono celular est conectado. Listo para hacer o recibir llamadas celulares.ParpadeandoLa lnea del celular se est usando.Las entradas del directorio telefnico se estn copiando desde un telfono celular.La unidad base est buscando el telfono celular emparejado.La unidad base est emparejando un telfono celular.La funcin de asistencia de voz remota est en uso.Hay una llamada de celular en espera.Parpadea rpidamenteSe est recibiendo una llamada de celular.Luz apagadaNo hay un telfono celular emparejado con la unidad base.No hay un telfono celular conectado a la unidad base.Auricular: enlace a elementos de la pantalla del celulartdSe est usando una lnea de celular.*1LCuando parpadea: Hay una llamada de celular en espera.LCuando parpadea rpidamente: se est recibiendo una llamada celular.*1Las lneas correspondientes se indican enseguida del elemento (1, 2: lnea celular).xdUn telfono celular est conectado.*1 Listo para hacer o recibir llamadas celulares.LCuando est apagado: no hay un telfono celular conectado a la unidad base.*1Las lneas correspondientes se indican enseguida del elemento (1, 2: lnea celular).uvSe est haciendo una llamada de celular en esa lnea.La lnea celular est seleccionada para la configuracin.Enlace a celular Gua Rpida Espaola 92 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Unidad base: enlace a elementos de la pantalla del celularuvSe est haciendo una llamada de celular en esa lnea.La lnea celular est seleccionada para la configuracin.Un audfono Bluetooth est conectado a la unidad base. Est listo para usar.Un audfono Bluetooth est en uso.Cmo conectar o desconectar el telfono celular (Auricular)Conexin automtica a los dispositivos con Bluetooth (telfonos celulares)La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexin. Consulte las instrucciones de operacin para cambiar el intervalo (predeterminado: 1 min).LCuando se sincronizan 3 dispositivos con capacidad Bluetooth (2 telfonos celulares y 1 auricular) a la unidad base, slo 2 dispositivos Bluetooth pueden usarse con la unidad a la vez, y la unidad base pierde su conexin con otros dispositivos Bluetooth. Para restablecer la conexin a los dispositivos Bluetooth automticamente, deje encendida la conexin automtica.Cmo conectar o desconectar manualmente el telfono celularSi no va a utilizar el vnculo del telfono celular emparejado a la funcin del celular temporalmente (por ejemplo, si no quiere que la unidad timbre cuando su lnea celular reciba una llamada), puede desconectar su telfono celular de la unidad base. Si desea usarlo de nuevo, reconecte el telfono celular a la unidad base.LDespus de desconectar un telfono celular emparejado de la unidad base manualmente, se conectar automticamente a la misma en 30 minutos. Si ya no usa la funcin de enlace al celular, deshaga el emparejamiento del celular.LLos telfonos celulares desconectados no se desemparejan de la unidad base, as que no es necesario emparejarlos de nuevo con ella.1Para conectarlo o desconectarlo:Para CELL 1: {MENU}(6251Para CELL 2: {MENU}(6252LSe emite un pitido largo.2{OFF}Modo exclusivo para la lnea celular (si no utiliza la lnea terrestre) (Auricular)Si no utiliza la lnea terrestre, recomendamos configurar la unidad en el modo exclusivo para la lnea celular. La configuracin predeterminada es Apagado.LSi enciende el Modo Ln. Cel., desconecte el cable de la lnea telefnica de la unidad base. De lo contrario, no es posible activar el Modo Ln. Cel..1{MENU}(1572Para encenderlo:{r}: Encendido s {SELEC.} s {r}: S s {SELEC.}Para apagarlo: {r}: Apagado s {SELEC.}Enlace a celular Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 93 Operaciones bsicasCmo hacer y contestar llamadas (Auricular)Para hacer llamadas de celular1Marque el nmero telefnico. s {CEL.}LCuando el modo exclusivo para la lnea celular est configurado, tambin puede oprimir {C}/{s} en lugar de {CEL.}.LCuando solo hay 1 telfono celular emparejado, la unidad comienza a marcar.2Cuando hay 2 telfonos celulares emparejados:{r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer llamadas por la lnea terrestreMarque el nmero telefnico. s {C}/{s}Para contestar llamadas{C}/{s}Para colgar{OFF}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin1{>} REDIAL s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular:Cuando solo 1 telfono celular est emparejado: {CEL.}oCuando 2 telfonos celulares estn emparejados:{CEL.} s {r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer una llamada terrestre:{C}Para ajustar el volumen del timbre (lnea de celular/lnea terrestre)Oprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra.Cmo hacer y contestar llamadas (Unidad base)Para hacer llamadas de celularMarque el nmero telefnico. s {CELL 1}/{CELL 2}LCuando el modo exclusivo para la lnea celular est configurado, tambin puede oprimir {s} sin oprimir {CELL 1}/{CELL 2}.Para hacer llamadas por la lnea terrestreMarque el nmero telefnico. s {s}Para contestar llamadas{s}Para colgar{s}Para ajustar el volumen del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin1{REDIAL} s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular: {CELL 1}/{CELL 2}Para hacer una llamada terrestre: {s}Para ajustar el volumen del timbre (lnea de celular/lnea terrestre)Oprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra. Gua Rpida Espaola 94 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Directorio telefnico (Auricular)Para aadir entradas1{<} k s {MENU}2{r}: Agregar Ent. Nueva s {SELEC.}3Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}4Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK} 5{r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF}LEn el paso 3, puede cambiar el idioma de introduccin de caracteres. ( s {r}: Seleccione el idioma deseado. s {OK}Para hacer llamadas1{<} k s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular:Cuando solo 1 telfono celular est emparejado: {CEL.}oCuando 2 telfonos celulares estn emparejados:{CEL.} s {r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer una llamada terrestre:{C}Directorio telefnico (Unidad base)Para hacer llamadas1{k} s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular: {CELL 1}/{CELL 2}Para hacer una llamada terrestre: {s}Contestador de llamadas de la lnea terrestre (Unidad base)Contestador encendido/apagadoOprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas.Para escuchar mensajes{P} (PLAY)Contestador de llamadas de la lnea terrestre (Auricular)Para escuchar mensajesPara escuchar mensajes nuevos:{REPRO.} o {MENU}(323Para escuchar todos los mensajes:{MENU}(324Operaciones bsicas Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 95 Cmo usar dispositivos BluetoothCopiado de entradas del directorio telefnico desde un telfono celular con Bluetooth (transferencia del directorio telefnico)Puede copiar entradas del directorio telefnico desde los telfonos celulares emparejados o desde otros telfonos celulares (no emparejados) al directorio telefnico de la unidad.1Auricular: {MENU}(6182Auricular:Para copiar desde telfonos celulares emparejados: {r}: Seleccione el telfono celular deseado. s {SELEC.}LLos elementos copiados se almacenan en el grupo (Cel. 1 o Cel. 2) en el que est emparejado el telfono celular. Para copiar desde otros telfonos celulares (no emparejados): {r}: Otro celular s {SELEC.} s {r}: Seleccione el grupo al que desea copiar. s {SELEC.}3Auricular:Cuando aparezca Transf. datos del directorio del celular : Vaya al paso 4.Cuando aparezca el men Selec. modo : {r}: Seleccione Auto o Manual. s {SELEC.}Auto: Descargue todas las entradas del telfono celular automticamente. Vaya al paso 5.Manual: Copie las entradas que seleccion.LEl men Selec. modo aparece solo cuando el telfono celular soporta PBAP (Perfil de Acceso a Directorio Telefnico) para la conexin Bluetooth.4Telfono celular:Siga las instrucciones de su telfono celular para copiar las entradas del directorio telefnico. LPara otros telfonos celulares (no emparejados), necesita buscar y seleccionar la unidad base. Quizs requiera el NIP de Bluetooth (predeterminado: 0000). Si su telfono celular muestra la confirmacin de la PassKey en su pantalla, siga las instrucciones para continuar.LLas entradas que se estn copiando aparecen en el auricular. 5Auricular: Espere a que aparezca Completo. s {OFF} Gua Rpida Espaola 96 Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) Cmo usar un audfono Bluetooth (opcional)Al emparejar un audfono Bluetooth con la unidad base, podr tener conversaciones a manos libres para llamadas terrestres.LSolo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 lneas celulares o el audfono y 1 lnea celular*1).*1No es posible usar un audfono Bluetooth para hablar en una lnea celular.Cmo emparejar un audfono Bluetooth con la unidad base1Audfono Bluetooth:Configure su audfono en modo de emparejamiento.LConsulte las instrucciones de operacin de su audfono.2Auricular:{MENU}(6211 Empareje usando el auricular.2 Emparejamiento3Si el NIP de su audfono es 0000, vaya al paso 4. Si el PIN de su audfono no es 0000, oprima {BORRAR} y, a continuacin, escriba el PIN de su audfono.LPor lo general, el NIP predeterminado es 0000. Consulte las instrucciones de operacin de su audfono.4Oprima {OK}, y despus espere a que se emita un pitido largo. s {OFF}LCuando aparece en la unidad base, el auricular est disponible para usar.Cmo operar un audfono inalmbrico con Bluetooth usando una lnea terrestreLPara obtener detalles, consulte las instrucciones de operacin de su audfono.LEs posible que algunas funciones descritas aqu no estn disponibles segn el auricular inalmbrico Bluetooth.NCmo realizar llamadas de la lnea terrestre con su audfono (Unidad base)1Oprima el botn del audfono que le permite ver las instrucciones operativas del audfono.2Despus de escuchar el tono de llamada en el audfono, marque el nmero de telfono con la unidad base.3Cuando termine de hablar, oprima el botn del audfono (consulte las instrucciones de operacin de su audfono).NCmo contestar llamadas de la lnea terrestre con su audfonoPara contestar una llamada de lnea terrestre, oprima el botn del audfono.Cuando termine de hablar, oprima el botn del audfono.LSi no puede colgar la llamada usando su audfono, oprima {s} 2 veces en la unidad base.NCmo cambiar entre la unidad base y su audfono Puede cambiar entre la unidad base y su audfono:durante una llamada por una lnea terrestre con el altavoz de la unidad base.durante una llamada de intercomunicador entre la unidad base y el auricular.mientras escucha los mensajes grabados en el contestador de llamadas de la unidad base.Para cambiar a su audfono:Oprima {} en la unidad base.Para cambiar a la unidad base: Oprima {s} en la unidad base.Cmo usar dispositivos Bluetooth21 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support (solo en ingls) 97 Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {MENU}(13)2Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Por qu no es posible emparejar un telfono celular con la unidad base?LDependiendo de la compatibilidad del telfono celular, es posible que no pueda emparejarlo con la unidad base. Para obtener ms informacin, visite http://shop.panasonic.com/bluetooth-phoneLConfirme que la funcin de Bluetooth de su telfono celular est encendida. Es posible que necesite encender esta funcin dependiendo de su telfono celular.Por qu no se escucha el tono de marcacin? (lnea celular)LAsegrese de que el indicador de CELL se ilumine y de que el telfono celular est conectado a la unidad base.LEl telfono celular no se ha emparejado con la unidad base. Empareje el telfono celular.Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de volumen {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base,visite: http://shop.panasonic.com/supportEs posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-TGFA50),visite: http://shop.panasonic.com/supportLos usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-877-833-8855.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (2a llamada)?LOprima {FLASH} en el auricular y {CALL WAIT} en la unidad base cuando escuche el tono de llamada en espera. Appendix Customer services 98 For assistance, please visit http://shop.panasonic.com/support Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informaon, Operang Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Limited Warranty (ONLY FOR U.S.A.) Appendix For assistance, please visit http://shop.panasonic.com/support 99 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix 100 For assistance, please visit http://shop.panasonic.com/support Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 Index

A Additional handset: 55 3-way conference: 26, 31 Alarm: 51 Answering calls: 24, 30 Answering system Call screening: 70 Erasing messages: 66, 67, 70 Greeting message: 65 Greeting only: 71 Listening to messages: 66, 69 New message alerting: 68 Number of rings: 70 Recording time: 71 Remote access code: 69 Remote operation: 69 Ring count: 70 Toll saver: 70 Turning on/off: 65 Assist button: 62 Auto intercom: 33 Auto talk: 24, 48 B Baby monitor: 53 Battery: 12, 13 Bluetooth wireless technology Cellular phone (Link to cell): 19 Headset: 63 Phonebook transfer: 59 Booster (Clarity booster): 25 C Call block: 34 One ring for blocked call: 36 Call share: 26, 31, 48 Call waiting: 25, 30 Call Waiting Caller ID: 25, 30 Caller ID number auto edit: 47, 50, 57 Caller ID service: 56 Caller list: 56 Caller list edit: 57 Cellular calls: 23, 29 Cellular phone Pairing: 19 Unpairing: 19 Chain dial: 40 CID (Caller ID): 56, 57 Conference calls: 26, 31 Control type: 15 Customer support: 48, 50 D Date and time: 17 Dialing mode: 18 Index Direct command code: 42 Display Contrast: 47, 50 Language: 17 E Eco mode: 14 Equalizer: 25 Error messages: 75 Flash: 25, 30, 48 F G Groups: 38 H Handset Deregistration: 55 Name: 55 Registration: 55 Hold: 24, 30 Intercom: 33 I K Key detector: 47, 49 L Key tone: 47 Landline calls: 23, 29 Line mode: 48 Link to cell Alert settings for your DECT phone: 61 Area code: 22 Auto connection: 21 Cellular line only mode: 21 Cellular line selection: 22 Connection: 21 Link to Cell app: 60 Ring as cell mode: 20 Select unit to ring: 20 Text message (SMS: Short Message Service) alert: 61 Low battery alert: 18 M Making calls: 23, 29 Missed calls: 56 Mute: 25, 30 N Noise reduction: 25 P Pause: 24, 29 Phonebook: 37 PIN: 22 Power failure (power backup operation): 27 R Redialing: 23, 24, 29 Ringer ID: 38 Ringer tone: 44, 46 Rotary/pulse service: 25, 31 Silent mode: 52 Speed dial: 40 SP-PHONE (Speakerphone): 23 Talking Caller ID: 56 S T 101 Index Temporary tone dialing: 25, 31 Time adjustment: 46 Transferring calls: 26, 31 Troubleshooting: 76 TTY: 98 VM (Voicemail): 72 Voice announcement language: 17 Voice paging: 33 Voicemail: 72 Volume V Receiver: 23 Ringer (Base unit): 30, 49, 50 Ringer (Handset): 24, 44, 46 Ringer for intercom call (Handset): 46 Speaker: 23, 29 W Wall mounting: 73 102 Notes 103 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.

(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2017 Printed in Malaysia

*PNQX8348ZA*

PNQX8348ZA PP1116AM0 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490

Comments

Related Exhibits

External Photos	Internal Photos	ID Label/Location Info

This product uses the FCC Data API but is not endorsed or certified by the FCC