96NKX-TGH260 DECT 6.0 Base with BT User manual

 

Operating Instructions Model No. Link-to-Cell Bluetooth Convergence Solution KX-TGH260 KX-TGH262 KX-TG472SK KX-TGH263 KX-TG473SK KX-TGH264 Model shown is KX-TGH260. Before initial use, see Getting Started on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 72. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Please register your product: http://www.panasonic.com/prodreg TGH26x(en)_1217_ver051.pdf 1 TGH26x(en)_1217_ver051.pdf 1 2013/12/17 18:31:47 2013/12/17 18:31:47 Using Bluetooth Devices Copying phonebook from a cellular phone

(phonebook transfer) ..................................47 Text message (SMS) alert .........................48 Using a Bluetooth wireless headset (optional) for landline calls .........................................49 Answering System for Landline Answering system for landline ...................51 Turning the answering system on/off .........51 Greeting message ......................................51 Listening to messages ...............................52 Advanced new message alerting features ......................................................53 Remote operation .......................................55 Answering system settings .........................56 Useful Information Voice mail service for landline ....................58 Wall mounting (Charger only) ....................59 Error messages ..........................................60 Troubleshooting .........................................61 FCC and other information .........................69 Gua Rpida Espaola Gua Rpida Espaola ...............................72 Appendix Customer services .....................................82 Warranty (For United States and Puerto Rico) ...........................................................83 Index Index...........................................................85 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Important Information For your safety .............................................6 Important safety instructions ........................7 For best performance ...................................7 Other information .........................................8 Specifications ...............................................9 Getting Started Setting up ...................................................10 Controls ......................................................12 Display icons/Indicators .............................13 Language settings ......................................14 Date and time .............................................14 Recording your greeting message .............14 Other settings .............................................15 Link to Cell Link to cell feature ......................................16 Pairing a cellular phone ..............................16 Link to cell settings .....................................17 Making/Answering Calls Making cellular calls ...................................20 Making landline calls ..................................20 Answering calls ..........................................21 Useful features during a call .......................21 Intercom .....................................................24 Power back-up operation for landline .........24 Phonebook Phonebook .................................................26 Speed dial ..................................................29 Programming Menu list .....................................................31 Alarm ..........................................................39 Silent mode ................................................40 Call block ....................................................40 Other programming ....................................42 Registering a unit .......................................42 Caller ID Service Using Caller ID service ...............................44 Caller list ....................................................44 2 TGH26x(en)_1217_ver051.pdf 2 TGH26x(en)_1217_ver051.pdf 2 2013/12/17 18:31:47 2013/12/17 18:31:47 Introduction Base unit Part No. KX-TGH260 KX-TGH260 KX-TGH260 KX-TGH260 KX-TGH260 KX-TGH260 Handset Part No. KX-TGHA20 KX-TGHA20 KX-TGHA20 KX-TGHA20 KX-TGHA20 KX-TGHA20 Quantity 1 2 2 3 3 4 Model composition Series Model No. KX-TGH260 series KX-TGH260 KX-TGH262 KX-TG472SK KX-TGH263 KX-TG473SK KX-TGH264 Accessory information Supplied accessories No. Accessory item/

Order number A AC adaptor/PNLV226Z B Telephone line cord/

PQJA10075Z C Rechargeable batteries/

HHR-4DPA D Handset cover*1/

PNYNTGHA20BR E Charger/PNLC1051ZB Quantity KX-TGH260 KX-TGH262 KX-TG472SK KX-TGH263 KX-TG473SK KX-TGH264 1 1 2 1 1 1 4 2 1 1 1 6 3 2 1 1 8 4 3

*1 The handset cover comes attached to the handset. A B C D E Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 82). For assistance, please visit http://www.panasonic.com/help 3 TGH26x(en)_1217_ver051.pdf 3 TGH26x(en)_1217_ver051.pdf 3 2013/12/17 18:31:47 2013/12/17 18:31:47 Introduction Accessory item Rechargeable batteries T-adaptor Range extender Key detector Order number HHR-4DPA*1 R To order, please visit http://www.panasonic.com/batterystore Battery type:

Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-J66 KX-TGA405*2 KX-TGA20*3

*1 Replacement batteries may have a different capacity from that of the supplied batteries.

*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender

*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:

http://panasonic.net/pcc/products/telephone/p/tga20/

Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system Handset (optional): KX-TGHA20 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. Bluetooth devices You can expand your phone system by pairing the following units to a single base unit. Your Bluetooth cellular phone*1: 2 max.

(for cellular calls: page 16) 4 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 4 TGH26x(en)_1217_ver051.pdf 4 2013/12/17 18:31:47 2013/12/17 18:31:47 Introduction Your Bluetooth headset*1: 1 max.

(for a wireless hands-free conversation: page 49)

*1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site:

http://www.panasonic.com/link2cell Trademarks R The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license. R All other trademarks identified herein are the property of their respective owners. For assistance, please visit http://www.panasonic.com/help 5 TGH26x(en)_1217_ver051.pdf 5 TGH26x(en)_1217_ver051.pdf 5 2013/12/17 18:31:47 2013/12/17 18:31:47 Important Information For your safety To prevent severe injury and loss of life/

property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://www.panasonic.com/contactinfo R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF

(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. 6 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 6 TGH26x(en)_1217_ver051.pdf 6 2013/12/17 18:31:47 2013/12/17 18:31:47 R This product is unable to make calls when:

the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how to recycle this battery. Important Information Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. For assistance, please visit http://www.panasonic.com/help 7 TGH26x(en)_1217_ver051.pdf 7 TGH26x(en)_1217_ver051.pdf 7 2013/12/17 18:31:47 2013/12/17 18:31:47 Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Notice for product disposal, transfer, or return R This product can store your private/

confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice ENERGY STAR As an ENERGY STAR Partner, Panasonic has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark. 8 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 8 TGH26x(en)_1217_ver051.pdf 8 2013/12/17 18:31:47 2013/12/17 18:31:47 Important Information Specifications R Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range:

1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power:

115 mW (max.) R Power source:

120 V AC, 60 Hz R Power consumption:

Base unit:

Standby: Approx. 1.1 W Maximum: Approx. 4.0 W Charger:

Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:

0 C 40 C (32 F 104 F), 20 % 80 %

relative air humidity (dry) For assistance, please visit http://www.panasonic.com/help 9 TGH26x(en)_1217_ver051.pdf 9 TGH26x(en)_1217_ver051.pdf 9 2013/12/17 18:31:47 2013/12/17 18:31:47 Getting Started Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 18). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack

(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note:

R Use only the supplied Panasonic AC adaptor PNLV226. n Charger Connect the AC adaptor to the power outlet. Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (

). R Do NOT use Alkaline/Manganese/Ni-Cd batteries. R Confirm correct polarities (

). R Follow the directions on the display to set up the unit. 10 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 10 TGH26x(en)_1217_ver051.pdf 10 2013/12/17 18:31:47 2013/12/17 18:31:47 145342111 Getting Started Battery level Icon Battery level High Medium Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 10 hours max.*1 6 days max.*1

*1 If eco mode is on. Note:

R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. R Eco mode is turned off when the clarity booster is activated (page 22). Battery charging Charge for about 7 hours. R Confirm Charging is displayed (

R When the batteries are fully charged, Fully charged is displayed.

). Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 7. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. For assistance, please visit http://www.panasonic.com/help 11 TGH26x(en)_1217_ver051.pdf 11 TGH26x(en)_1217_ver051.pdf 11 2013/12/17 18:31:47 2013/12/17 18:31:47 11 Getting Started Controls Handset N (TALK) Speaker M Dial keypad (*: TONE) MZN (SP-PHONE: Speakerphone) Microphone Receiver Display MOFFN MFLASHNMCALL WAITN M function key) indicator N (NOISE REDUCTION/Smart Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items.

(Volume: MDN or MCN): Adjust the receiver or speaker volume while talking. MFN W: View the phonebook entry. MEN REDIAL: View the redial list. MCN CID (Caller ID): View the caller list. Base unit

) Charge contacts Speaker ANSWER ON/OFF indicator (

HEADSET indicator CELL 1 indicator CELL 2 indicator MjN/MkN (VOL.: Volume up/down) MANSWER ON/OFFN N (PLAY/STOP) M Message indicator M M MERASEN MLOCATORN R You can locate a misplaced handset N (Repeat) N (Skip) by pressing MLOCATORN. 12 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 12 TGH26x(en)_1217_ver051.pdf 12 2013/12/17 18:31:47 2013/12/17 18:31:47 ABABGHIJFKADECADCEFHIGJKLB Display icons/Indicators Handset display items Item Meaning Within base unit range Out of base unit range The landline is in use. R When flashing:

The call is put on hold. R When flashing rapidly: An incoming call is now being received. A cellular line is in use.*1 R When flashing:

The cellular call is put on hold. R When flashing rapidly:

A cellular call is being received. A cellular phone is connected.*1 Ready to make/

receive cellular calls. R When turned off:

A cellular phone is not connected to the base unit. (page 18) A cellular call is being done on that line. The cellular line is selected for the setting. Eco mode is on. (page 11) Noise reduction is set.

(page 22) Equalizer is set. (page 22) Speakerphone is on.

(page 20) Ringer volume is off.*2

(page 34, 35) Silent mode is on. (page 40) Call sharing mode is off.

(page 37) Alarm is on. (page 39) Item Booster on In use Getting Started Meaning Handset number Battery level Blocked call (page 40) Clarity booster is on.

(page 22) Answering system is being used by another handset or the base unit. Someone is using the corresponding line. Cell1 in use Cell2 in use C1&C2 in use Line in use

*1 Corresponding cellular line(s) is(are) indicated next to the item.

*2 Corresponding lines (1, 2: cellular line, L:

landline) are indicated next to the item. If all lines are turned off, no line is indicated. CELL indicators on the base unit The CELL indicators show each cellular line status. Status On Flashing Flashing rapidly Meaning A cellular phone is connected. Ready to make/receive cellular calls. The cellular line is in use. Phonebook entries are being copied from a cellular phone (page 47). The base unit is searching for the paired cellular phone. The base unit is pairing a cellular phone. A cellular call is put on hold. A cellular call is being received. For assistance, please visit http://www.panasonic.com/help 13 TGH26x(en)_1217_ver051.pdf 13 TGH26x(en)_1217_ver051.pdf 13 2013/12/17 18:31:47 2013/12/17 18:31:47 Getting Started Status Light off Meaning A cellular phone is not paired to the base unit. A cellular phone is not connected to the base unit

(page 18). Bluetooth HEADSET indicator on the base unit The HEADSET indicator shows the Bluetooth headset status. Voice guidance language You can select either English or Espaol as the voice guidance language of the answering system. The default setting is English. 1 MMENUN (right soft key) #112 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN Status On Flashing Flashing rapidly Light off Meaning A Bluetooth headset is connected to the base unit. Ready to use it. A Bluetooth headset is in use. The base unit is searching for the paired Bluetooth headset. The base unit is pairing a headset. A landline call is being received. The Bluetooth headset is not connected to the base unit. A Bluetooth headset is not paired to the base unit. Language settings Display language You can select either English or Espaol as the display language. The default setting is English. 1 MMENUN (right soft key) #110 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN Date and time 1 MMENUN (right soft key) #101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2014 07 15 14 3 MOKN 4 Enter the current hour and minute

(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:

R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 51 for details. 1 MMENUN (right soft key) #302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN 14 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 14 TGH26x(en)_1217_ver051.pdf 14 2013/12/17 18:31:47 2013/12/17 18:31:47 key) Other settings Smart function key (

The Smart function key (

on the bottom of the handset and informs you with its flashing to allow you to activate the following features by simply pressing this key. n When the indicator flashes rapidly, you can:

Answer the call (outside call, intercom). key) is located

(page 21, 24) Stop paging. Stop the alarm sound. (page 40) n When the indicator flashes slowly in standby mode, you can:

Listen to new messages. (page 52) Listen to new voice mail messages.

(page 59) View the caller list when there are missed calls. (page 45) To activate these features, their Smart function key must be On. (page 15) key) indicator flashes rapidly/slowly, Using the Smart function key (

When the press M R The above features can be activated N. depending the situation. R If you answer a call using the Smart function key, the speakerphone is activated. R Even if the handset is placed on the base unit or charger, the feature can be activated. You can talk or listen to new messages without lifting up the handset. If you want to perform further operations, lift up the handset. R When the unit has new messages, new voice mail messages, and missed calls, the unit can be operated to play the new messages first, play the new voice mail messages next, and then show the missed calls. Getting Started Setting the Smart function key The Smart function key for the following features must be On. New message (Default: On) New VM (Default: On) Missed call (Default: Off) The settings can be set for each handset. 1 MMENUN (right soft key) #278 2 MbN: Select the desired setting and press MSELECTN. R features. is displayed next to the selected R To cancel a selected feature, press disappears. MSELECTN again. 3 MSAVEN a MOFFN Note:

R If the indicator flashes when the handset is not placed on the base unit or charger, battery consumption is faster than usual. Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. 1 MMENUN (right soft key) #120 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN Screen saver mode The backlight goes dark when on a call or turns off completely after 1 minute of inactivity if the handset is not on the base unit or charger. Activate the handset display again by:

pressing M pressing MOFFN at all other times. N when on a call. For assistance, please visit http://www.panasonic.com/help 15 TGH26x(en)_1217_ver051.pdf 15 TGH26x(en)_1217_ver051.pdf 15 2013/12/17 18:31:47 2013/12/17 18:31:47 Link to Cell Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to:

use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. talk on cellular calls even if your cellular phone is in your pocket or bag. enjoy cordless cellular calls even if your cellular phone plugged in and charging. Important:

R Your cellular phone must support the Hands Free Profile (HFP) specification. R You may pair 2 cellular phones and 1 headset. R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit. Pairing a cellular phone Important:

R For more details and the list of compatible cellular phones, please visit our Web site:

http://www.panasonic.com/link2cell R Before pairing a Bluetooth enabled cellular phone to the base unit, make sure that no other Bluetooth device such as a Bluetooth headset is connected to your cellular phone. 1 Handset:

For CELL 1: MMENUN (right soft key)

#6241 For CELL 2: MMENUN (right soft key)

#6242 R After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone:

While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode. R Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default: 0000). If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed. 3 Handset:

Wait until a long beep sounds. R It may take more than 10 seconds to complete pairing. R When the corresponding CELL indicator lights up, the cellular phone is connected to the base unit. You are ready to make cellular calls. 4 MOFFN Note:

R Make sure that your cellular phone is set to connect to this product automatically. Refer to your cellular phones operating instructions. R Make sure you cancel your cellular phones current pairing if you want to pair it to the other line (page 16). R The default setting for the text message alert feature is On(no announce), so when you pair your cellular phone to the base unit, this feature may be activated

(page 48). (This depends on the version and type of cellular phone you are using.) Unpairing a cellular phone You can cancel the pairing of a cellular phone that is stored in the base unit. 1 For CELL 1: MMENUN (right soft key)

#6111 For CELL 2: MMENUN (right soft key)

#6112 16 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 16 TGH26x(en)_1217_ver051.pdf 16 2013/12/17 18:31:47 2013/12/17 18:31:47 2 MbN: Yes a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When All is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN (right soft key)

#6271 For CELL 2: MMENUN (right soft key)

#6272 a MSAVEN 2 MbN: Select the desired handset or All. 3 MOFFN Note:

R When you select a specific handset to receive calls for a cellular line, other handsets cannot answer the calls. R When you change the setting to All, the base unit ringer volume also returns to the lowest level even if the ringer volume has been changed. R The units selected with this setting have the text message alert feature (page 48) applied to them. Ring as cell mode Once this feature is turned on, the handset and base unit ring using the same ringer tone as your cellular phone. The following settings are available:

Off: Turn this feature off to use the ringer tones of the handset and base unit. Caller information is announced depending on the Talking Caller ID setting (page 36). On (with Talking CID) (default):

The handset and base unit use your cellular phones ringer tone. Caller information is Link to Cell announced even if the Talking Caller ID is turned off. On (without Talking CID): The handset and base unit use your cellular phones ringer tone. Caller information is not announced even if the Talking Caller ID is turned on. Important:

R To use this feature, your cellular phone must support Bluetooth in-band ringtone. Refer to your cellular phones operating instructions. 1 For CELL 1: MMENUN (right soft key)

#6141 For CELL 2: MMENUN (right soft key)

#6142 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN Note:

R The units use the preset ringer tones

(page 35) instead of your cellular phones ringer tone when a cellular call is being received if:

your cellular phone is in silent mode

(depending on your cellular phone). the base unit is in use. 2 handsets are sharing a landline call. R If your cellular phone is in silent mode with On (with Talking CID) set, the unit announces caller information even when Talking Caller ID is turned off (page 36). To use the handset ringer tone instead of your cellular phones ringer tone Select Off in step 2, Ring as cell mode, page 17. To change the handset ringer tone for a cellular line, see page 34. Auto connection to the Bluetooth devices (cellular phones or headset) After pairing, your Bluetooth devices are connected to the base unit. If you move the Bluetooth devices out of base unit range, the 17 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 17 TGH26x(en)_1217_ver051.pdf 17 2013/12/17 18:31:47 2013/12/17 18:31:47 Link to Cell Bluetooth devices are disconnected from the base unit. This feature allows the base unit to try to reconnect the Bluetooth devices at regular intervals when it returns within base unit range. You can set the interval. The default setting is 1 min. Important:

R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on. R Some cellular phones lose connection after usage, please check the specifications of your cellular phone for more details. 1 MMENUN (right soft key) #632 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN Note:

R Some cellular phones may ask you if you accept the connection requirement from the base unit. In that case, select Off in step 2. Check the specifications of your cellular phone. Connecting/disconnecting the cellular phone manually If you will not be using the paired cellular phones link to cell feature temporarily (for example, you do not want the unit to ring when your cellular line receives a call), you can disconnect your cellular phone from the base unit. If you want to use it again, reconnect the cellular phone to the base unit. Note:

R Even if a paired cellular phone was disconnected from the base unit, if it is brought within the base units range during the auto connection interval, it may automatically connect to the base unit

(page 17). R A disconnected cellular phone is not unpaired from the base unit, so pairing it to the base unit again is unnecessary. 1 To connect/disconnect:

For CELL 1: MMENUN (right soft key)

#6251 For CELL 2: MMENUN (right soft key)

#6252 R A long beep sounds. 2 MOFFN Cellular line only mode (If you do not use the landline) If you do not use the landline, we recommend setting the unit to the cellular line only mode. Important:

R If you turn on the Cell line only mode, disconnect the telephone line cord from the base unit. Otherwise the Cell line only mode cannot be activated. 1 MMENUN (right soft key) #157 2 To turn on:

MbN: On a MSELECTN a MbN: Yes a MSELECTN To turn off:

MbN: Off a MSELECTN Note:

R Once you set this mode, you can use the following buttons to make cellular calls for N or MZN instead of the handset, press M MCELLN (page 20). R Once you set this mode, the following features cannot be used:

Landline features (page 38) Answering system (page 51) Messages cannot be received. Voice mail features (page 58) R After this mode is turned on or off, the base unit reboots. Bluetooth connections from cellular phones or headset are disconnected. If the auto connection is turned on

(page 17), the cellular phones are reconnected. will be displayed on the handset momentarily. The handset can be used once is displayed. 18 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 18 TGH26x(en)_1217_ver051.pdf 18 2013/12/17 18:31:48 2013/12/17 18:31:48 When you use the landline again Before connecting the telephone line to the base unit, select Off in step 2, Cellular line only mode (If you do not use the landline), page 18. Link to Cell we recommend that you change the PIN, and keep it confidential. Important:

R Please make note of your new PIN. The unit does not reveal the PIN to you. If you forget your PIN, see page 68. 1 MMENUN (right soft key) #619 R If the unit prompts you to enter the old PIN (when the default has been changed), enter the current 4-digit PIN. 2 Enter the new 4-digit PIN. a MOKN 3 Enter the new 4-digit PIN again. a MSAVEN 4 MOFFN Cellular line selection This feature determines which cellular line is selected to make cellular calls when:

you press MCELLN on the handset. you press M N or MZN on the handset while the cellular line only mode is turned on. The following settings are available:

Manual (default): You can select the desired cellular line when making a call. Cellphone 1*1: CELL 1 is selected. Cellphone 2*1: CELL 2 is selected. 1 MMENUN (right soft key) #634 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN

*1 After the Bluetooth device is paired, the device name is displayed. Storing your area code (for dialing only a 7-digit phone number to make a local call) You need to add your area code when making cellular calls to a phone number in your area. Once you store your area code, it is automatically added to the beginning of the 7-digit phone number when making cellular calls. 1 MMENUN (right soft key) #633 2 Enter the 3-digit area code. R To correct a digit, press MCLEARN. 3 MSAVEN a MOFFN Changing the Bluetooth PIN

(Personal Identification Number) The PIN is used to pair cellular phones to the base unit. The default PIN is 0000. To prevent unauthorized access to this product, For assistance, please visit http://www.panasonic.com/help 19 TGH26x(en)_1217_ver051.pdf 19 TGH26x(en)_1217_ver051.pdf 19 2013/12/17 18:31:48 2013/12/17 18:31:48 Making/Answering Calls Making cellular calls Important:

R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R Before making calls, confirm that the corresponding CELL indicator on the base unit lights up (page 13). 1 Lift the handset and dial the phone number. R To correct a digit, press MCLEARN. 2 MCELLN R The unit starts dialing when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 19). Go to step 4. 3 MbN: Select the desired cellular phone. a MSELECTN 4 When you finish talking, press MOFFN or place the handset on the base unit or charger. Note:

R To switch to the speaker, press MZN. To switch back to the receiver, press MZN/

M N. Adjusting the receiver or speaker volume Press MDN or MCN repeatedly while talking. Making a cellular call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.). 1 MEN REDIAL 2 MbN: Select the desired entry. 3 MCELLN R The unit starts dialing when:

only 1 cellular phone is paired. a specific line is set to make cellular 4 MbN: Select the desired cellular phone. a calls (page 19). MSELECTN Erasing a number in the redial list n When a cellular phone is paired:

MMENUN 1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN 5 MOFFN n When a cellular phone is not paired:

1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN 4 MOFFN MERASEN Making landline calls 1 Lift the handset and dial the phone number. R To correct a digit, press MCLEARN. 2 M 3 When you finish talking, press MOFFN or N place the handset on the base unit or charger. Using the speakerphone 1 Dial the phone number and press MZN. 2 When you finish talking, press MOFFN. Note:

R To switch back to the receiver, press MZN/

M N. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.). 1 MEN REDIAL 20 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 20 TGH26x(en)_1217_ver051.pdf 20 2013/12/17 18:31:48 2013/12/17 18:31:48 2 MbN: Select the desired entry. 3 M N Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 29). Example: If you need to dial the line access number 9 when making outside calls with a PBX:

1 9 a MDN (Pause) 2 Dial the phone number. a M Note:

R A 3.5 second pause is inserted each time N MDN (Pause) is pressed. Answering calls 1 Lift the handset and press M N or MZN when the unit rings. R To answer a cellular call, you can also press MCELLN. 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 37). Temporary handset ringer off: You can turn the ringer off temporarily by pressing M N. Using the Smart function key When the M R You can answer the call even if the handset indicator flashes rapidly, press N. is placed on the base unit or charger

(page 15). You can finish talking by pressing MOFFN without lifting up the handset. Making/Answering Calls Adjusting the ringer volume Handset Press MDN or MCN repeatedly to select the desired volume while ringing. Base unit Press MjN or MkN repeatedly to select the desired volume while ringing. R To turn the ringer off, press and hold MkN until the unit beeps. Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold on the cellular line:

Press MCELLN.*1 R Another handset user can take the call by pressing MCELLN.*1

*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. To release hold on the landline:

Press M R Another handset user can take the call N. by pressing M N. Note:

R After holding for 10 minutes, the call is disconnected. Mute 1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN. Note:

R MMUTEN is a soft key visible on the display during a call. For assistance, please visit http://www.panasonic.com/help 21 TGH26x(en)_1217_ver051.pdf 21 TGH26x(en)_1217_ver051.pdf 21 2013/12/17 18:31:48 2013/12/17 18:31:48 Making/Answering Calls Flash for landline calls MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:

R To change the flash time, see page 37. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your service provider/telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed after you hear the call waiting tone on the handset. 1 Press MCALL WAITN to answer the 2nd 2 To switch between calls, press MCALL call. WAITN. Note:

R Please contact your service provider/

telephone company for details and availability of this service in your area. Temporary tone dialing for landline calls (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, Booster on is displayed. Handset noise reduction This feature allows you to hear the voice of the person you are talking to clearly, by reducing the surrounding noise coming from the other partys telephone. Press M Note:

R Depending on the environment where this handset is being used, this feature may not be effective. N to turn on/off while talking. R This feature is not available using the speakerphone. Handset equalizer This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. 1 Press MMENUN while talking. 2 MbN: Equalizer a MSELECTN 3 MbN: Select the desired setting. 4 Press MOKN to exit. Note:

R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the R When both the Equalizer setting and speakerphone. noise reduction are activated, shown on the display. is Call share You can join an existing outside call. n While another unit is on a cellular call:

1 To join the conversation, press MCELLN. R You can join the conversation when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 19). 2 MbN: Select the desired cellular phone. a MSELECTN 22 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 22 TGH26x(en)_1217_ver051.pdf 22 2013/12/17 18:31:48 2013/12/17 18:31:48 n While another unit is on a landline call:

To join the conversation, press M N. Note:

R A maximum of 3 parties (including 1 outside party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 37). Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between 2 handsets. 1 During an outside call, press MMENUN. 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN 4 Wait for the paged party to answer. R If the paged party does not answer, N to return to the outside press M call. 5 To complete the transfer:

Press MOFFN. To establish a conference call:

MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. R To put the outside call on hold:

MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Making/Answering Calls Transferring a cellular call between the handset and a cellular phone Transferring a cellular call from the handset to a cellular phone 1 Press MMENUN during a cellular call. 2 MbN: Transfer to cell a MSELECTN R The cellular call is transferred to the cellular phone. Note:

R Depending on your cellular phone type, you may need to set the cellular phone to be ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. Transferring a cellular call from a cellular phone to the handset During a conversation using a cellular phone, the call cannot be transferred to the handset by the cellular phone. Perform the following with the handset. 1 During a conversation using a cellular phone, press MCELLN. R The call is transferred to the handset when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 19). 2 MbN: Select the desired cellular phone. a MSELECTN R The call is transferred to the handset. Answering a 2nd call If you receive a call while talking on the phone, the interrupt tone sounds (page 35) and the 2nd callers information is displayed if you subscribe to Caller ID (page 44). Answering a 2nd call during a landline call 1 Press MMENUN during a landline call. For assistance, please visit http://www.panasonic.com/help 23 TGH26x(en)_1217_ver051.pdf 23 TGH26x(en)_1217_ver051.pdf 23 2013/12/17 18:31:48 2013/12/17 18:31:48 Making/Answering Calls 2 MbN: Hold a MSELECTN 3 To answer the 2nd call:

Press MCELLN while the 2nd call is being received. 4 To hang up the 2nd call and return to the 1st call (landline call), press MOFFN, then press M N. Answering a 2nd call during a cellular call 1 Press MMENUN during a cellular call. 2 MbN: Hold a MSELECTN 3 To answer the 2nd call:

N or MCELLN while the 2nd call Press M is being received. 4 To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN*1.

*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. Intercom Intercom calls can be made between handsets. Note:

R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds

(page 35). To answer the call with the handset, press MOFFN, then press the corresponding line key. Making an intercom call 1 MMENUN (right soft key) a a MSELECTN 2 MbN: Select the desired unit. a MSELECTN 3 When you finish talking, press MOFFN. Note:

R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. Answering an intercom call 1 Press M N to answer the page. 2 When you finish talking, press MOFFN. Using the Smart function key Press M N to answer the page. Power back-up operation for landline When a power failure occurs, the charged handset temporarily supplies power to the base unit (power back-up mode). This allows you to make and receive landline calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and phonebook are available only when using a handset other than the handset supplying power to the base unit. You can program Power failure and the default setting is Auto (page 37). Important:

R If a handset is not placed on the base unit when a power failure occurs, Base no power Press OFF is displayed. After pressing MOFFN on the handset, place it on the base unit to start power back-up mode. R Power back-up mode will not work if the battery level of the power supplying handset is or

. R Do not lift the power supplying handset from the base unit during power back-up mode. 24 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 24 TGH26x(en)_1217_ver051.pdf 24 2013/12/17 18:31:48 2013/12/17 18:31:48 Making/Answering Calls 4 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned on automatically and the call is made. n When 2 or more handsets are registered:

You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Making a call using the phonebook There must be at least 2 handsets registered to the base unit in order for the phonebook feature to be used during a power failure. You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Answering calls during a power failure n When only 1 handset is registered:

1 When the unit rings, keep the handset on the base unit and press M MZN. R Speakerphone is turned on. N or 2 When you finish talking, press MOFFN. n When 2 or more handsets are registered:

When the unit rings, use a handset which is not supplying power to the base unit. R Do not use or lift the handset which is placed on the base unit during power back-up mode. Note:

R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. Panasonic Ni-MH battery performance (supplied batteries) during power back-up mode When the batteries are fully charged, operating time of the handset in power back-up mode varies depending on usage. Continuous use of the handset in power back-up mode: 1.5 hours max. Continuous use of the handset other than a handset in power back-up mode: 2 hours max. Not in use in power back-up mode: 2 hours max. Making calls during a power failure n When only 1 handset is registered:

1 Lift the handset and dial the phone number. 2 Within 1 minute, place the handset on the base unit. R Wait until speakerphone is turned on automatically and the call is made. 3 When the other party answers the call, keep the handset on the base unit and talk using the speakerphone. 4 When you finish talking, press MOFFN. n When 2 or more handsets are registered:

You should leave one handset on the base unit for supplying the power, and use another handset for making calls. Note:

R The range of the base unit is limited during a power failure. Please use the handset close to the base unit. Making a call using the redial list n When only 1 handset is registered:

1 Lift the handset. 2 MEN REDIAL 3 MbN: Select the desired entry. For assistance, please visit http://www.panasonic.com/help 25 TGH26x(en)_1217_ver051.pdf 25 TGH26x(en)_1217_ver051.pdf 25 2013/12/17 18:31:48 2013/12/17 18:31:48 Phonebook Phonebook You can store up to 3,000 phonebook entries and assign a name (16 characters max.) and up to 3 phone numbers to each (24 digits max. each). You can also assign a label to each phone number, and assign each phonebook entry to a group (page 27). The following groups are available:

Group 1: Home*1 (default) Group 2: Cell 1*1 Group 3: Cell 2*1 Group 4-9: You can change the group name for each group.

*1 For groups 1-3, the group names cannot be changed. The total number of entries that can be stored varies depending on how many phone numbers you have stored for each entry. Total number of entries is shown below:

1 name + 1 phone number: 3,000 entries 1 name + 2 phone numbers: 1,500 entries 1 name + 3 phone numbers: 1,000 entries Important:

R All entries can be shared by any registered handset. R You can copy phonebook entries from a Bluetooth cellular phone to the units phonebook (page 47). Adding phonebook entries 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 MbN: (Name) a MSELECTN 4 Enter the partys name. a MOKN 5 MbN: Select the desired phone number location. a MSELECTN 6 Enter the partys phone number. a MOKN 7 MbN: Select the desired label. a MSELECTN R To store 2 or 3 phone numbers, repeat steps 5-7. 8 MbN: Select the current setting of the group (default: Home). a MSELECTN 9 MbN: Select the desired group. a 10 MbN: <Save> a MSELECTN a MOFFN MSELECTN Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. n When a cellular phone is paired:

1 MEN REDIAL 2 MbN: Select the desired entry. a 3 MbN: Save a MSELECTN 4 To store the name, continue from step MMENUN 3, Editing entries, page 28. n When a cellular phone is not paired:

1 MEN REDIAL 2 MbN: Select the desired entry. a MDETAILN 3 MSAVEN 4 To store the name, continue from step 3, Editing entries, page 28. Storing caller information to the phonebook n When a cellular phone is paired:

1 MCN CID 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. And then, press *

(Save). Go to step 4. MSELECTN 3 MbN: Save caller ID a 4 MbN: Phonebook a MSELECTN 5 Continue from step 3, Editing entries, page 28. n When a cellular phone is not paired:

1 MCN CID 26 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 26 TGH26x(en)_1217_ver051.pdf 26 2013/12/17 18:31:48 2013/12/17 18:31:48 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. And then, press MSAVEN. Go to step 4. MSELECTN 3 MbN: Save caller ID a 4 MbN: Phonebook a MSELECTN 5 Continue from step 3, Editing entries, page 28. Character table for entering names While entering characters, you can switch between uppercase and lowercase by pressing * (Aa). Key 1 2 3 4 5 6 7 8 9 0

h K k Character

) H ,

. 1

B C 2 A c 2 a b 3 F D E f d e 3 4 G H I 4 i g 5 L J j l 5 M N O 6 m n 6 P Q R S q r s p U V T 8 8 v t u Z Y W X w x y z 0 7 7 9 9 o

Phonebook R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 5 seconds after entering a character, the character is fixed and the cursor moves to the next space. R in the above table represents a single space. Erasing the character or number Press MFN or MEN. a MCLEARN R Press and hold MCLEARN to erase all characters or numbers. Groups Groups can help you find entries in the phonebook quickly and easily. You can change the group name for groups 4-9

(Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. Changing group names/setting ringer ID 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a MSELECTN R If you selected Home, Cell 1, or Cell 2, go to step 5. 4 To change group names MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN 5 To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:

Select the desired ringer tone. a MSAVEN 6 MOFFN Finding and calling from a phonebook entry n Using a cellular line:

For assistance, please visit http://www.panasonic.com/help 27 TGH26x(en)_1217_ver051.pdf 27 TGH26x(en)_1217_ver051.pdf 27 2013/12/17 18:31:48 2013/12/17 18:31:48 Phonebook 1 MFN W 2 To scroll through all entries MbN: Select the desired entry. a MCELLN To search by first character Press the dial key (0 to 9, or #) which contains the character you are searching for (page 27). MbN: Scroll through the phonebook if necessary. a MCELLN To search by query You can narrow down the search to enter the first characters of a name.

To search for the name, enter the first characters (up to 4) in uppercase (page 27). MOKN MbN: Scroll through the phonebook if necessary. a MCELLN MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary. a MCELLN To search by group 3 MbN: Select the desired phone number. a MCALLN R The unit starts dialing when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 19). MSELECTN 4 MbN: Select the desired cellular phone. a n Using the landline:

1 MFN W 2 To scroll through all entries N MbN: Select the desired entry. a M To search by first character Press the dial key (0 to 9, or #) which contains the character you are searching for (page 27). MbN: Scroll through the phonebook if necessary. a M To search by query You can narrow down the search to enter the first characters of a name. N

To search for the name, enter the first characters (up to 4) in uppercase (page 27). MOKN MbN: Scroll through the phonebook if necessary. a M To search by group N MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary. a M 3 MbN: Select the desired phone number. N a M N Editing entries 1 Find the desired entry (page 27). a 2 MbN: Edit a MSELECTN 3 MbN: Select the desired item you want to MMENUN change. a MSELECTN 4 To change the name:

Edit the name. a MOKN To change the phone number:

Edit the phone number. a MOKN MbN: Select the desired label. a MSELECTN To change the group:

MbN: Select the desired group (page 27). a MSELECTN 5 MbN: <Save> a MSELECTNa MOFFN Erasing entries Erasing an entry 1 Find the desired entry (page 27). a 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN 4 MOFFN MMENUN Erasing all entries 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 28 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 28 TGH26x(en)_1217_ver051.pdf 28 2013/12/17 18:31:48 2013/12/17 18:31:48 MSELECTN 3 MbN: Select the desired group. a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN 6 MOFFN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call:

MMENUN a MbN: Phonebook a MSELECTN 2 MbN: Select the desired entry. a MSELECTN 3 MbN: Select the desired phone number. 4 Press MCALLN to dial the number. Note:

R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 21). R If you have rotary/pulse service, you need to press * (TONE) before pressing MMENUN on the handset in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding *

(TONE) to the beginning of phone numbers you wish to chain dial (page 26). Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Phonebook Adding phone numbers to speed dial keys n By entering phone numbers:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters max.). a MOKN 4 Enter the partys phone number (24 digits max.). a MOKN 5 MSELECTN a MOFFN n From the phonebook:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSELECTN 4 MbN: Select the desired phone number. a MSAVEN a MOFFN Note:

R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key.

(1 to 9). a MMENUN Editing an entry 1 Press and hold the desired speed dial key 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN 5 MSELECTN a MOFFN Erasing an entry 1 Press and hold the desired speed dial key 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN

(1 to 9). a MMENUN For assistance, please visit http://www.panasonic.com/help 29 TGH26x(en)_1217_ver051.pdf 29 TGH26x(en)_1217_ver051.pdf 29 2013/12/17 18:31:48 2013/12/17 18:31:48 Phonebook Viewing an entry/Making a call n Using a cellular line:

1 Press and hold the desired speed dial key (1 to 9). 2 MCELLN R The unit starts dialing when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 19). 3 MbN: Select the desired cellular phone. a MSELECTN n Using the landline:

key (1 to 9). 2 M N 1 Press and hold the desired speed dial 30 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 30 TGH26x(en)_1217_ver051.pdf 30 2013/12/17 18:31:48 2013/12/17 18:31:48 Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN (right soft key) 2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN (right soft key) a Enter the desired code. Example: Press MMENUN (right soft key) #101. 2 Select the desired setting. a MSAVEN Note:

R To exit the operation, press MOFFN. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table Main menu:

Operation Viewing the caller list. Caller list Answering device Sub-menu 2 Main menu:

Sub-menu 1 Message list Play new message Play all message Erase all message*1 Greeting Record greeting*1 Check greeting Pre-recorded*1

(Reset to pre-recorded greeting) Settings Code

#213 Code

#329

#323

#324

#325

#302

#303

#304 44 52 52 52 53 51 52 52 For assistance, please visit http://www.panasonic.com/help 31 TGH26x(en)_1217_ver051.pdf 31 TGH26x(en)_1217_ver051.pdf 31 2013/12/17 18:31:48 2013/12/17 18:31:48 Programming Sub-menu 1 New message alert*1 Sub-menu 2 Outgoing call On/Off Outgoing call Notification to Outgoing call Remote code Base unit beep Settings Ring count*1 Recording time*1 Remote code*1 Screen call Voice Mail access*3 Answer on*1 Answer off*1 Main menu:

Operation Listening to voice mail messages. Intercom Main menu:

Operation Paging the desired unit. Main menu:

Sub-menu 1 Ringer volume*3 Ringer tone*3, *5, *6 Interrupt tone*7 Ring adjustments*4 Sub-menu 2 Handset Base unit*1 Settings On

<Off>

Activate

<Inactivate>

On

<Off>

2-7 rings

<4 rings>

Toll saver 1 min

<3 min>

Greeting only*2

<111>

<On>Off Settings Off-6 <6>

Off-6 <1>

<Tone 1>

<On>Off Code

#338

#339

#211

#305

#306

#310

#327

#328 Code

#330 Code

#274 Code

#160

#G160

#161

#201 54 53 56 57 55 56 51 51 58 24 23 32 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 32 TGH26x(en)_1217_ver051.pdf 32 2013/12/17 18:31:49 2013/12/17 18:31:49 Sub-menu 1 Silent mode Sub-menu 2 On/Off Start/End Select group Settings On

<Off>

<11:00 PM/

06:00 AM>

Key detector*8 Main menu:

Sub-menu 1 Search Battery check Sub-menu 2 Settings Programming Code

#238

#237

#241 Code

#655 40 40 40 For assistance, please visit http://www.panasonic.com/help 33 TGH26x(en)_1217_ver051.pdf 33 TGH26x(en)_1217_ver051.pdf 33 2013/12/17 18:31:49 2013/12/17 18:31:49 Bluetooth Programming Main menu:

Sub-menu 1 Link to cell 1: Add new device*9

(for CELL 1) 2: Add new device*9

(for CELL 2) Phonebook transfer Headset Sub-menu 2 Connect*1/

Disconnect*1 Ringer volume Handset Ringer volume Base unit*1 Ringer tone*5 Select unit to ring*1 Ring as cell

(limited)*1 Text message alert On/Off*1 Text message alert Alert tone*12 Pair Unpair Add new device*9 Connect*1/

Disconnect*1 Pair Unpair Settings Off6 <6>

Off6 <1>

<Tone 2>*10

<Tone 4>*11 Handset 1-6

<All>

<On (with Talking CID)>

On (without Talking CID) Off

<On(no announce)>

On(with name) Off

<Tone 1>*10

<Tone 2>*11 Code

#6251*10

#6252*11

#6281*10

#6282*11

#G6281*10

#G6282*11

#6291*10

#6292*11

#6271*10

#6272*11

#6141*10

#6142*11

#6101*10

#6102*11

#6101*10

#6102*11

#6241*10

#6242*11

#6111*10

#6112*11

#618

#621

#622

#621

#612 18 21 17 17 48 48 16 16 47 49 49 49 49 34 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 34 TGH26x(en)_1217_ver051.pdf 34 2013/12/17 18:31:49 2013/12/17 18:31:49 Sub-menu 1 Settings Sub-menu 2 Auto connect*1 Cell area code*1 Cell line only mode*1 Cell line select Set PIN*1 International code*1 Country code*1 Trunk prefix*1 Main menu: W Phonebook Operation Viewing the phonebook entry. Settings Main menu:

Sub-menu 1 Ring adjustments Sub-menu 2 Ringer volume Handset*3 Ringer volume Base unit*1, *3 Ringer tone*3, *5, *6

(Handset) Interrupt tone*7 Silent mode Settings

<1 min>

3 min 5 min 10 min Off On

<Off>

Cellphone 1*9 Cellphone 2*9

<Manual>

<0000>

Settings Off6 <6>

Off6 <1>

<Tone 1>

<On>Off On/Off On

<Off>

Start/End

<11:00 PM/

06:00 AM>

Select group Programming Code

#632

#633

#157

#634

#619

#117

#118

#119 Code

#280 Code

#160

#G160

#161

#201

#238

#237

#241 17 19 18 19 19 47 27 23 40 40 40 For assistance, please visit http://www.panasonic.com/help 35 TGH26x(en)_1217_ver051.pdf 35 TGH26x(en)_1217_ver051.pdf 35 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming Sub-menu 1 Set date & time Talking caller ID 2: Add new Key detector setting*8 1: Add new device

(for Detector1)*14 device

(for Detector2) device

(for Detector3) device

(for Detector4) 3: Add new 4: Add new Sub-menu 2 Date and time*1 Memo alarm Alarm15 Time adjustment*1, *13 Handset Base unit*1 Change name*1 Registration Deregistration Settings Once Daily Weekly

<Off>

<Caller ID auto>

Manual

<On>Off On

<Off>

Detector1 Detector2*15 Detector3*15 Detector4*15 Call block*1 Speed dial Record greeting*1 Voice mail*3 Block a single number Block range of numbers Block unknown CID

(CID: Caller ID) First ring Save VM access#*1

(VM: Voice mail) VM tone detect*1 On

<Off>

<On>Off

<On>Off Code

#101

#720

#226

#162

#G162

#6561

#6562*16

#6563*16

#6564*16

#6571

#6572*16

#6573*16

#6574*16

#6581

#6582*16

#6583*16

#6584*16

#217

#240

#173

#261

#302

#331

#332 14 39 44 40 41 41 29 51 58 58 36 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 36 TGH26x(en)_1217_ver051.pdf 36 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming Sub-menu 1 Display Smart function key Key tone Caller ID edit

(Caller ID number auto edit) Auto talk*19 Set tel line*3 Sub-menu 2 Wallpaper Clock Display color Display mode*17 LCD backlight*18 Handset name Display name Set dial mode*1 Set flash time*1, *20 Call sharing*1 Registration Power failure Set line mode*1, *21 Register handset Deregistration*2 Settings

<Wallpaper1>

<On>Off

<Color1>

Color2

<Multi items>

Single item

<On>Off On

<Off>

<On>Off

<On>Off On

<Off>

Pulse

<Tone>

900 ms

<700 ms>

600 ms 400 ms 300 ms 250 ms 200 ms 160 ms 110 ms 100 ms 90 ms 80 ms A <B>

<On>Off

<Auto>

Off Code

#181

#198

#182

#192

#191

#104

#105

#278

#165

#214

#200

#120

#121

#122

#194

#130

#131

#152 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 37 TGH26x(en)_1217_ver051.pdf 37 2013/12/17 18:31:49 2013/12/17 18:31:49 42 42 15 45 21 15 22 22 42 42 24 37 Programming Sub-menu 1 Customer support Change language Sub-menu 2 Display Voice prompt*1 Main menu:

Sub-menu 1 Date and time*1 Memo alarm Set date & time Sub-menu 2 Alarm15 Code

#680

#110

#112 Code

#101

#720 14 14 14 39 Settings

<English>

Espaol

<English>

Espaol Settings Once Daily Weekly

<Off>

<Caller ID auto>

Manual Time adjustment*1, *13

*1 If you program these settings using one of the units, you do not need to program the same

#226

*2 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.

*3 When the cellular line only mode is turned on, these menus are not displayed (page 18).

*4 This menu icon is displayed when the key detector is not registered.

*5 The preset melodies in this product (Tone 3 - Melody 15) are used with permission of

*6 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or 2012 Copyrights Vision Inc.

*7 This tone lets you know when you receive an outside call while you are on another line or an 2). If you select a melody, you cannot distinguish lines by their ringers. intercom call. If you select On, the tone sounds 2 times. manual for more information on the key detector.

*8 This setting is available when you have the key detector (KX-TGA20). Read the installation

*9 After the Bluetooth device is paired, the device name is displayed.

*10 For CELL 1

*11 For CELL 2

*12 The preset melodies in this product are used with the following permission:

*13 This feature allows the unit to automatically adjust the date and time each time caller Tone 1 and Tone 2: 2013 Copyrights Vision Inc. Tone 5 - Melody 15: 2012 Copyrights Vision Inc. information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 14).

*14 For models with supplied key detectors, the display shows 1: Detector1.

*15 If you register 2 or more key detectors.

*16 If you have 2 or more key detectors.

*17 You can select to display either a single item or multiple items on one screen at a time for the handset menu list, recorded message list, phonebook list, caller list, and redial list. When 38 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 38 TGH26x(en)_1217_ver051.pdf 38 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming in multiple items display mode, you can switch the screen to confirm the detailed information by:

pressing MDETAILN, or pressing MMENUN a MbN: Detail a MSELECTN On: Backlight is on (dimmed). Off: Backlight turns off after 10 seconds of charging. Additionally, less power is

*18 You can set the handset display backlight while on charge. consumed if you leave the handset on the base unit or charger after the battery is fully charged.

*19 If you subscribe to a Caller ID service and want to view the callers information after lifting up

*20 The flash time depends on your telephone exchange or host PBX. Contact your PBX the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.

*21 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals

(snooze function). A text memo can also be displayed for the alarm. A total of 5 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:

R Make sure the units date and time setting is correct (page 14). 1 MMENUN (right soft key) #720 2 Select an alarm by pressing 1 to 5. a MSELECTN 3 MbN: Select the desired alarm option. a MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:

Enter the desired month and date. a MOKN n Weekly:

MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN 7 Enter a text memo (30 characters max.). a MOKN 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. 9 MbN: Select the desired snooze setting. a MSAVEN 10 MSELECTN a MOFFN Note:

R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. For assistance, please visit http://www.panasonic.com/help 39 TGH26x(en)_1217_ver051.pdf 39 TGH26x(en)_1217_ver051.pdf 39 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming R Press any dial key, M N, or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature

(page 27), you can also select groups of callers whose calls override silent mode and ring the handset (Caller ID subscribers only). Important:

R Make sure the units date and time setting is correct (page 14). R We recommend turning the base unit ringer off (page 34, 35) in addition to turning the silent mode on. R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMENUN (right soft key) #238 2 MbN: Select the desired setting. a exit. wish to start this feature. MSAVEN R If you select Off, press MOFFN to 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN 2 Continue from step 3, Turning silent mode on/off, page 40. Selecting groups to bypass silent mode 1 MMENUN (right soft key) #241 2 Select your desired groups by pressing 1 to 9. R is displayed next to the selected group numbers. R To cancel a selected group, press the disappears. same dial key again. 3 MSAVEN a MOFFN Call block This feature rejects calls from unwanted callers (Caller ID subscribers only). The following items are available when storing phone numbers in the call block list (250 max.). Block a single number: The unit can reject calls from specific phone numbers. Block range of numbers: The unit can reject calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. You can also set the unit to reject calls that do not have a phone number. When a call is received, the unit rings briefly*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 This is called first ring. If you do not want the first ring to sound, turn this setting to Off (page 41). Important:

R Rejected calls are logged in the caller list. Changing the start and end time 1 MMENUN (right soft key) #237 40 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 40 TGH26x(en)_1217_ver051.pdf 40 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming MSELECTN 2 MbN: Block a single number a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the phone number (24 digits max.). R To erase a digit, press MCLEARN. 5 MSAVEN a MOFFN Storing a range of numbers 1 MMENUN (right soft key) #217 2 MbN: Block range of numbers a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). R To erase a digit, press MCLEARN. MSELECTN 5 MSAVEN a MOFFN Blocking incoming calls that have no phone number You can reject calls when no phone number is provided, such as private callers or out of area calls. 1 MMENUN (right soft key) #240 2 MbN: Select the desired setting. a MSAVEN a MOFFN Note:

R When the unit receives a cellular call without a phone number, the call may not be rejected. Setting the first ring for the call block list If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to Off. The default setting is On. 1 MMENUN (right soft key) #173 2 MbN: Select the desired setting. a MSAVEN a MOFFN Storing unwanted callers Storing a single phone number Important:

R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. n From the caller list:

When a cellular phone is paired:

1 MCN CID 2 MbN: Select the entry to be blocked. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. And then, press * (Save). Go to step 4. 3 MbN: Save caller ID a MSELECTN 4 MbN: Call block a MSELECTN 5 MbN: Yes a MSELECTN 6 Edit the phone number if necessary (24 digits max.). 7 MSAVEN a MOFFN When a cellular phone is not paired:

1 MCN CID 2 MbN: Select the entry to be blocked. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. And then, press MSAVEN. Go to step 4. 3 MbN: Save caller ID a MSELECTN 4 MbN: Call block a MSELECTN 5 MbN: Yes a MSELECTN 6 Edit the phone number if necessary (24 digits max.). 7 MSAVEN a MOFFN n By entering phone numbers:

1 MMENUN (right soft key) #217 For assistance, please visit http://www.panasonic.com/help 41 TGH26x(en)_1217_ver051.pdf 41 TGH26x(en)_1217_ver051.pdf 41 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming Viewing/editing/erasing call block numbers 1 MMENUN (right soft key) #217 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. R To exit, press MOFFN. 4 To edit a number:

MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:

MERASEN a MbN: Yes a MSELECTN a MOFFN Note:

R When editing, press the desired dial key to add, MCLEARN to erase. Erasing all call block numbers 1 MMENUN (right soft key) #217 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN MSELECTN Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 42). 1 MMENUN (right soft key) #104 2 Enter the desired name (10 characters max.). 3 MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. 1 MMENUN (right soft key) #105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:

R See page 4 for information on the available model. Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:

MMENUN (right soft key) #130 2 Base unit:

Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. 3 Handset:

Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to 42 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 42 TGH26x(en)_1217_ver051.pdf 42 2013/12/17 18:31:49 2013/12/17 18:31:49 Programming the same base unit. This allows the handset to end its wireless connection with the system. 1 MMENUN (right soft key) #131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to 3 MbN: Yes a MSELECTN a MOFFN cancel. a MSELECTN For assistance, please visit http://www.panasonic.com/help 43 TGH26x(en)_1217_ver051.pdf 43 TGH26x(en)_1217_ver051.pdf 43 2013/12/17 18:31:49 2013/12/17 18:31:49 Caller ID Service Using Caller ID service Important:

R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your service provider/telephone company for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:

Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Missed calls If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:

R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:

A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:

subscribe to a Caller ID service of your service provider/telephone company. turn this feature on (page 36). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your service provider/telephone company following every ring. The unit announces in English only. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:

R Make sure the units date and time setting is correct (page 14). Viewing the caller list and calling back n Using a cellular line 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 MMENUN a MbN: Call back (Cell) a MSELECTN R To exit, press MOFFN. R The unit starts dialing when:

only 1 cellular phone is paired. 44 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 44 TGH26x(en)_1217_ver051.pdf 44 2013/12/17 18:31:49 2013/12/17 18:31:49 a specific line is set to make cellular calls (page 19). MSELECTN 4 MbN: Select the desired cellular phone. a n Using the landline 1 MCN CID 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M To exit, press MOFFN. N. Note:

R In step 2, to see the detailed information when in multiple display mode:

MMENUN a MbN: Detail a MSELECTN R If the entry has already been viewed or answered, is displayed. R or indicates the caller information was received from the cellular line. Using the Smart function key When Missed call is displayed and the indicator flashes slowly, there are missed calls. Press M N in step 1 on Viewing the caller list and calling back, page 44. R Missed call must be set to On in Setting the Smart function key, page 15. R If the handset is placed on the base unit or charger, you need to lift up the handset to view the caller list after pressing M N. R When the unit has new messages, new voice mail messages, and missed calls, the unit can be operated to play the new messages first, play the new voice mail messages next, and then show the missed calls. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. 1 MCN CID 2 MbN: Select the desired entry. a MMENUN 3 MbN: Edit a MSELECTN Caller ID Service 4 Press MEDITN repeatedly until the phone number is shown in the desired format. 5 Using a cellular line:

To make a cellular call, continue from step 2, Making cellular calls, page 20. Using the landline:

M N Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:

When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit

(page 37). The default setting is On. Note:

R Phone numbers from the 4 most recently edited area codes are automatically edited. Erasing selected caller information 1 MCN CID 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN 4 MOFFN For assistance, please visit http://www.panasonic.com/help 45 TGH26x(en)_1217_ver051.pdf 45 TGH26x(en)_1217_ver051.pdf 45 2013/12/17 18:31:49 2013/12/17 18:31:49 Caller ID Service Erasing all caller information 1 MCN CID 2 MERASEN a MbN: Yes a MSELECTN 3 MOFFN 46 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 46 TGH26x(en)_1217_ver051.pdf 46 2013/12/17 18:31:49 2013/12/17 18:31:49 Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones

(not paired) to the units phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important:

R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R The unit can copy up to 3 phone numbers of a copied entry for each entry. If an entry has 4 or more phone numbers, the phone numbers will be copied as 2 entries with the same name (up to 6 numbers in total). R If a phonebook entry includes additional data such as a picture, that entry may fail to copy to the base unit. R If your cellular phone includes international call entries, set the conversion codes before copying (page 47). 1 Handset:

2 Handset:

MMENUN (right soft key) #618 To copy from paired cellular phones:

MbN: Select the desired cellular phone. a MSELECTN R Copied items are stored to the group

(Cell 1 or Cell 2) which the cellular phone is paired to. To copy from other cellular phones

(not paired):

MbN: Other cell a MSELECTN a MbN: Select the group you want to copy to. a MSELECTN transfer phone book is displayed:

Go to step 4. When Select mode menu is displayed:

MbN: Select Auto or Manual. a MSELECTN Auto: Download all entries from the cellular phone automatically. Go to step 5. 3 When Use the cell to 4 Cellular phone:

Using Bluetooth Devices Manual: Copy entries you selected. R Select mode menu is displayed only when the cellular phone supports PBAP (Phone Book Access Profile) for Bluetooth connection. R Some cellular phones may require you to perform an operation on the cellular phone even if you select Auto. Follow the instructions of your cellular phone to copy phonebook entries. R For other cellular phones (not paired), you need to search for and select the base unit. The Bluetooth PIN (default:

0000) may be required. If your cellular phone shows PassKey confirmation on its display, follow the directions to proceed. R The entries being copied are displayed on the handset. 5 Handset:

Wait until Completed is displayed. R You can continue copying other entries if necessary. 6 Handset: MOFFN Note:

R Some copied entries may have characters which do not exist in the character table

(page 27). These characters can be displayed but cannot be entered when editing an entry. R The unit does not support some characters. If a copied entry includes those characters, they are replaced with other available characters or H. R If you receive a call while copying phonebook entries, the copying procedure stops. Try again after finishing the call. Setting conversion codes You must first set the following 3 dialing codes before transferring the phonebook from your cellular phone (each 4 digits max.). International code: An international prefix used when you make an international call. Country code: Your country code for international calls. For assistance, please visit http://www.panasonic.com/help 47 TGH26x(en)_1217_ver051.pdf 47 TGH26x(en)_1217_ver051.pdf 47 2013/12/17 18:31:49 2013/12/17 18:31:49 Using Bluetooth Devices Trunk prefix: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. 1 MMENUN (right soft key) 2 To store International code:

#117 To store Country code: #118 To store Trunk prefix: #119 3 Enter the desired number. a MSAVEN 4 MOFFN Note:

R After you copy the entries, confirm that the numbers were transferred correctly. Text message (SMS) alert The handset can notify you when a cellular phone that is paired to the base unit receives a text message. The handset can notify you by briefly displaying a message, by sounding a ringer tone or melody, and by announcement. The announcement is in English only. Important:

R To use the text message alert feature, you need to pair your cellular phone to the base unit (page 16). R Your cellular phone must support Message Access Profile (MAP) specification. We recommend that you confirm if your cellular phone supports MAP in advance. R For more details and the list of compatible cellular phones, please visit our Web site:

http://www.panasonic.com/link2cell For those whose devices do not support the Message Access Profile (MAP):

By installing the app Text Message Alert, you can use the text message alert feature. Please visit our Web site:

http://www.panasonic.net/pcc/support/tel/sms/

R Refer to your cellular phone operating instructions for information on how to install applications. Setting text message (SMS) alert The following settings are available. The default is On(no announce). On(no announce): The handset notifies you but does not make an announcement. On(with name): The handset notifies you and announces the name of the message sender. Off: The handset does not notify you. Your cellular phone In order to use the text message alert feature, you may need to enable your cellular phones Bluetooth notification feature. Handset n Turning text message (SMS) alert on/off 1 For CELL 1: MMENUN (right soft key)

#6101 For CELL 2: MMENUN (right soft key)

#6102 2 MbN: On/Off a MSELECTN 3 MbN: Select the desired setting. 4 MSAVEN a MOFFN n Selecting the alerting tone 1 For CELL 1: MMENUN (right soft key)

#6101 For CELL 2: MMENUN (right soft key)

#6102 2 MbN: Alert tone a MSELECTN 3 MbN: Select the desired setting. 4 MSAVEN a MOFFN Note:

R If the text message alert feature does not work, you must turn on notifications in the Bluetooth settings of your cellular phone. Then, unplug the base units AC adaptor and reconnect it to activate the text message alert feature. For instructions on how to do this, visit our Web site:

http://www.panasonic.net/pcc/support/tel/

sms/

48 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 48 TGH26x(en)_1217_ver051.pdf 48 2013/12/17 18:31:50 2013/12/17 18:31:50 R The unit announces the name or phone number depending on your cellular phone. R This feature may not pronounce all names correctly. R Text message alerts are not logged in the caller list of your unit. Using Bluetooth Devices 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When the HEADSET indicator on the base unit lights up, you are ready to use the headset. Using a Bluetooth wireless headset (optional) for landline calls By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for landline calls. Important:

R Your Bluetooth wireless headset must support the HeadSet Profile (HSP) specification. R 1 headset can be paired to the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R For best performance, we recommend using a Bluetooth headset within 1 m

(3.3 feet) of the base unit. A headset can communicate with the base unit within a range of approximately 10 m (33 feet). Pairing a headset to the base unit Important:

R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Your headset:

Set your headset to pairing mode. R Refer to the headset operating instructions. 2 Handset:

3 If your headset PIN is 0000, go to MMENUN (right soft key) #621 step 4. If your headset PIN is other than 0000, press MCLEARN, then enter your headset PIN. R Typically, default PIN is 0000. Refer to the headset operating instructions. Connecting/disconnecting a headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important:

R Make sure that the headset is turned on. 1 To connect/disconnect:

MMENUN (right soft key) #622 R A long beep sounds. 2 MOFFN Unpairing a headset You can cancel a pairing of the headset that is stored to the base unit. 1 MMENUN (right soft key) #612 2 MbN: Yes a MSELECTN R When the headset is unpaired, the HEADSET indicator is turned off. 3 MOFFN Operating a Bluetooth wireless headset using a landline Important:

R Refer to your headset operating instructions for headset operations. Answering landline calls with your headset To answer a landline call, turn on your headset referring to your headset operating instructions. When you finish talking, turn off your headset referring to your headset operating instructions. For assistance, please visit http://www.panasonic.com/help 49 TGH26x(en)_1217_ver051.pdf 49 TGH26x(en)_1217_ver051.pdf 49 2013/12/17 18:31:50 2013/12/17 18:31:50 Using Bluetooth Devices Note:

R If you cannot hang up the call using your N (STOP) on the base headset, press M unit. Switching between the base unit and your headset You can switch between the base unit and your headset while listening to messages recorded on the base unit answering system. R You can only switch from the base unit to your headset. n To switch to your headset:

Turn on the headset referring to your headset operating instructions. Call sharing between your headset and the handset Important:

R To activate this feature, you should set call sharing mode to on beforehand (page 37). n While the handset is on a landline call:

To join the conversation with your headset, turn on the headset referring to your headset operating instructions. n While your headset is on a landline call:

To join the conversation with the handset, press M N. Adjusting your headset receiver volume Base unit Press MjN or MkN repeatedly while using your headset. 50 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 50 TGH26x(en)_1217_ver051.pdf 50 2013/12/17 18:31:50 2013/12/17 18:31:50 Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 57). Important:

R Make sure the units date and time setting is correct (page 14). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes. A maximum of 64 messages can be recorded. Note:

R When message memory becomes full:

Messages full is shown on the handset display. The ANSWER ON/OFF indicator (

on the base unit flashes rapidly if the answering system is turned on. If you use the pre-recorded greeting

) message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Answering System for Landline Handset 1 To turn on:

MMENUN (right soft key) #327 To turn off:

MMENUN (right soft key) #328 2 MOFFN Note for base unit and handset:

R When the answering system is turned on,

) on the ANSWER ON/OFF indicator (

the base unit lights up. Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:

your own greeting message a pre-recorded greeting message Recording your greeting message 1 MMENUN (right soft key) #302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:

If you erase or do not record your own If the message recording time (page 57) greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. For assistance, please visit http://www.panasonic.com/help 51 TGH26x(en)_1217_ver051.pdf 51 TGH26x(en)_1217_ver051.pdf 51 2013/12/17 18:31:50 2013/12/17 18:31:50 Answering System for Landline Resetting to a pre-recorded greeting message If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. 1 MMENUN (right soft key) #304 2 MYESN a MOFFN Playing back the greeting message 1 MMENUN (right soft key) #303 2 To exit, press MOFFN. Listening to messages Using the base unit When new messages have been recorded, M Press M N (PLAY). R During playback, M N on the base unit flashes. N on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Key MjN or MkN M N N N (STOP) M M MERASEN Operation Adjust the speaker volume Repeat message*1 Skip message Stop playback Erase currently playing message

*1 If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:

MMENUN (right soft key) #323 To listen to all messages:

MMENUN (right soft key) #324 2 When finished, press MOFFN. Note:

R To switch to the receiver, press M R You can also use the MPLAYN soft key, if N. displayed, to play new messages. Using the Smart function key When New message is displayed and the indicator flashes slowly, there are new N in step 1 on Using the handset, messages. Press M page 52. R New message must be set to On in Setting the Smart function key, page 15. Listening to messages from the message list You can select the item to play back. 1 MMENUN (right soft key) #329 2 MbN: Select the desired item from the message list. a MPLAYN R You can erase the selected message as follows:

MMENUN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN 3 When finished, press MOFFN. Note:

R If the item has already been heard, is R Message is displayed in the message list if the unit cannot receive caller information. displayed. 52 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 52 TGH26x(en)_1217_ver051.pdf 52 2013/12/17 18:31:50 2013/12/17 18:31:50 Operating the answering system MMENUN (right soft key) a a MSELECTN Key MDN or MCN 1 or MFN 2 or MEN 3 4 5 6 76 8 MPAUSEN 9 or MSTOPN 0

*4*4

*5

*6 Operation Adjust the receiver/speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback)*2 Enter the Settings menu Play new messages Play all messages Play greeting message Record greeting message Turn answering system on Pause message*3 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages Reset to a pre-recorded greeting message

*1 If pressed within the first 5 seconds of a message, the previous message is played except when playing back from the message list.

*3 To resume playback:

*2 When you play a message from the message list, the unit stops message playback and the display goes back to the message list. MbN: Playback a MSELECTN

*4 You can also erase as follows:

MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Answering System for Landline Calling back (Caller ID subscribers only) n Using a cellular line:

1 Press MPAUSEN during playback. 2 MbN: Call back (Cell) a MSELECTN R The unit starts dialing when:

only 1 cellular phone is paired. a specific line is set to make cellular calls (page 19). 3 MbN: Select the desired cellular phone. a MSELECTN n Using the landline:

1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN Editing the number before calling back 1 Press MPAUSEN during playback. 2 MbN: Edit a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format

(page 45). a M R To call back using a cellular line, N continue from step 2, Making cellular calls, page 20. Erasing all messages 1 MMENUN (right soft key) #325 2 MbN: Yes a MSELECTN a MOFFN Advanced new message alerting features Audible message alert This feature allows the base unit to beep to inform you of a new message arrival when new messages are recorded. The base unit beeps 2 times every minute until you listen to the messages, if the Base unit beep setting is turned on. The default setting is Off. For assistance, please visit http://www.panasonic.com/help 53 TGH26x(en)_1217_ver051.pdf 53 TGH26x(en)_1217_ver051.pdf 53 2013/12/17 18:31:50 2013/12/17 18:31:50 Answering System for Landline 1 MMENUN (right soft key) #339 2 MbN: Select the desired setting. a MSAVEN a MOFFN New message alert by a call This feature allows you to receive a notification by phone when new messages are recorded. The base unit calls a phone number you specify. You can then operate the answering system remotely to listen to the new message. To use this feature, you must:

store a phone number to which the unit makes the call to. turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call

(page 55). Important:

R A new message alert is stopped 1 minute after the unit starts to call. The unit will not retry the call even if the call is not answered. Storing a phone number to which the unit makes an alert call n From the phonebook:

1 MMENUN (right soft key) #338 2 MbN: Notification to a 3 MbN: Phonebook a MSELECTN 4 MbN: Select the desired phonebook MSELECTN a MADDN entry. a MSELECTN 5 MbN: Select the desired phone number. a MSAVEN a MOFFN n By entering a phone number:

1 MMENUN (right soft key) #338 2 MbN: Notification to a 3 MbN: Manual a MSELECTN 4 Enter the desired name (16 characters MSELECTN a MADDN max.). a MOKN 5 Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN Turning on/off the new message alert setting 1 MMENUN (right soft key) #338 2 MbN: On/Off a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Editing the set phone number 1 MMENUN (right soft key) #338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Edit a MSELECTN 4 Edit the name if necessary (16 characters max.). a MOKN 5 Edit the phone number if necessary (24 digits max.). a MOKN a MSELECTN a MOFFN Erasing the set phone number 1 MMENUN (right soft key) #338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN R The new message alert setting is turned off. Activating/inactivating the remote access code to play messages If you activate this feature, you must enter the remote access code (page 55) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is Inactivate. Inactivate: You can listen to the message by pressing 4 to play new messages (without entering the remote access code). Activate: You must enter your remote access code and then press 4 to play new message. 1 MMENUN (right soft key) #338 2 MbN: Remote code a MSELECTN 54 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 54 TGH26x(en)_1217_ver051.pdf 54 2013/12/17 18:31:50 2013/12/17 18:31:50 3 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to messages After you answer the new message alert, you can listen to the messages as follows. n When the remote access code is set to Inactivate:

Press 4 to play the new message during the announcement. Activate:

1 Enter the remote access code n When the remote access code is set to

(page 55) during the announcement. 2 Press 4 to play the new message. Note:

R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show the record. Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:

R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMENUN (right soft key) #306 Answering System for Landline 2 Enter the desired 3-digit remote access code. 3 MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 55. R The entered remote access code is deleted. Using the answering system remotely 1 Dial your landline phone number from a touch-tone phone. 2 After the greeting message starts, enter your remote access code. 3 Follow the voice guidance prompts as necessary or control the unit using remote commands (page 55). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 55). Note:

R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. For assistance, please visit http://www.panasonic.com/help 55 TGH26x(en)_1217_ver051.pdf 55 TGH26x(en)_1217_ver051.pdf 55 2013/12/17 18:31:50 2013/12/17 18:31:50 Answering System for Landline Key 1 2 4 5 9 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0

*4 Erase currently playing message

*5 Erase all messages

*# End remote operation

(or hang up)

*1 If pressed within the first 5 seconds of a message, the previous message is played.

*2 For English voice guidance only

*3 For Spanish voice guidance only Turning on the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Let the phone ring 15 times. R A long beep is heard. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 55). Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the handsets speaker. To adjust the speaker volume, press MDN or MCN on the handset repeatedly. You can answer the call by pressing M the handset. N on Call screening can be set for each unit. The default setting is On. 1 MMENUN (right soft key) #310 2 MbN: Select the desired setting. a MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 55), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 MMENUN (right soft key) #211 2 MbN: Select the desired setting. a MSAVEN a MOFFN For voice mail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, call waiting, voice mail, and unlimited local/regional/long distance calls, please note the following:

R To use the voice mail service provided by your service provider/telephone company rather than the units answering system, turn off the answering system (page 51). R To use this units answering system rather than the voice mail service provided by your service provider/telephone company, please contact your service provider/

telephone company to deactivate your voice mail service. If your service provider/telephone company cannot do this:

Set this units Ring count setting so that this units answering system answers calls before the voice mail service of your service provider/

56 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 56 TGH26x(en)_1217_ver051.pdf 56 2013/12/17 18:31:50 2013/12/17 18:31:50 Answering System for Landline telephone company does. It is necessary to check the number of rings required to activate the voice mail service provided by your service provider/telephone company before changing this setting. Change the number of rings of the voice mail service so that the answering system can answer the call first. To do so, contact your service provider/

telephone company. Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. 1 MMENUN (right soft key) #305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 57. Note:

R When you select Greeting only:

the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 51). For assistance, please visit http://www.panasonic.com/help 57 TGH26x(en)_1217_ver051.pdf 57 TGH26x(en)_1217_ver051.pdf 57 2013/12/17 18:31:50 2013/12/17 18:31:50 Useful Information Voice mail service for landline Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone companys voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please contact your service provider/telephone company for details of this service. Important:

R To use the voice mail service provided by your service provider/telephone company rather than the units answering system, turn off the answering system (page 51). For details, see page 56. Storing the voice mail (VM) access number In order to listen to your voice mail messages, you must dial your service provider/telephone companys voice mail access number. Once you have stored your voice mail access number, you can dial it automatically

(page 58). 1 MMENUN (right soft key) #331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:

R When storing your voice mail access number and your mailbox password, press MDN (Pause) to add pauses (page 21) between the access number and the password as necessary. Contact your service provider/telephone company for the required pause time. Example:

To erase the voice mail access number 1 MMENUN (right soft key) #331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voice mail (VM) tone detection Your service provider/telephone company sends special signals (sometimes called voice mail tones or stutter tones) to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press M messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded. Turn this feature off when:

You do not subscribe to voice mail service. Your service provider/telephone company N, you have new voice mail does not send voice mail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your service provider/telephone company. Turning VM tone detection on/off The default setting is On. 1 MMENUN (right soft key) #332 2 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to voice mail messages The unit lets you know that you have new voice mail messages in the following way:

58 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 58 TGH26x(en)_1217_ver051.pdf 58 2013/12/17 18:31:50 2013/12/17 18:31:50 1-222-333-4444VM access numberPausesPasswordPPPP8888 Useful Information 27.2 mm (1 1/16 inches) Voice mail msg. via phone co. is displayed if message indication service is available. 1 MMENUN (right soft key) a MSELECTN R The speakerphone turns on. a 2 Follow the pre-recorded instructions. 3 When finished, press MOFFN. Note:

R You can also use the MACCESSN soft key, if displayed, to play new voice mail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Using the Smart function key When Voice mail msg. via phone co. is displayed and the indicator flashes slowly, there are new voice mail messages. Press M N in step 1 on Listening to voice mail messages, page 58. R New VM must be set to On in Setting R If the voice mail (VM) access number is not the Smart function key, page 15. stored, the indicator does not flash. R When the unit has new messages, new voice mail messages, and missed calls, the unit can be operated to play the new messages first, play the new voice mail messages next, and then show the missed calls. Wall mounting (Charger only) Note:

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Drive the screws (

wall.

) (not supplied) into the For assistance, please visit http://www.panasonic.com/help 59 TGH26x(en)_1217_ver051.pdf 59 TGH26x(en)_1217_ver051.pdf 59 2013/12/17 18:31:50 2013/12/17 18:31:50 1212 Useful Information Error messages Display message Ask phone company for VM access #

Base no power orNo link to base. Reconnect main base AC adaptor. orNo link. Busy Check tel line Error!!

Failed Invalid Cause/solution R You have not stored the voice mail access number. Store the number (page 58). R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. Re-register the handset (page 42). R The handsets registration may have been canceled. R When No link. is displayed during a power failure, place a handset on the base unit to supply power to the base unit. R No cellular phone is paired to the base unit. Pair a cellular phone (page 16). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 10). R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode

(page 18). R Recording was too short. Try again. R Someone is using a cellular line or headset. Try again later. R The phonebook copy is incomplete (page 47). The cellular phone is disconnected from the base unit. Make sure that other Bluetooth devices are not connected to the cellular phone, and try again. R Although the unit tried to connect to the cellular phone or headset, the connection has been failed. Someone is using a cellular line or headset. Try again later. Make sure that the cellular phone or headset is not connected to other Bluetooth devices. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 42). 60 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 60 TGH26x(en)_1217_ver051.pdf 60 2013/12/17 18:31:51 2013/12/17 18:31:51 Display message Requires subscription to Caller ID. Use rechargeable battery. Useful Information Cause/solution R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 7. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert the batteries into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. The handset display is blank or dark. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 10). R Fully charge the batteries (page 11). R Check the connections (page 10). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 42). R The handset is in screen saver mode (page 15). Activate the handset display again by:

pressing M pressing MOFFN at all other times. N when on a call. R LCD backlight is set to Off while on charge. Change the setting (page 37). For assistance, please visit http://www.panasonic.com/help 61 TGH26x(en)_1217_ver051.pdf 61 TGH26x(en)_1217_ver051.pdf 61 2013/12/17 18:31:51 2013/12/17 18:31:51 Useful Information Problem I cannot pair a cellular phone to the base unit. I cannot connect a cellular phone to the base unit. I cannot hear a dial tone. Cause/solution R Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. R Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from your cellular phone. R Some cellular phones may require you to enter the Bluetooth PIN to pairing. Confirm that you entered the correct PIN. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range R Your cellular phones Bluetooth feature is turned off. Turn

(page 13). it on. R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually (page 18). R The cellular phone has not been paired to the base unit. Pair the cellular phone (page 16). R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company. I cannot use the Smart function key even if the indicator is flashing slowly. The base unit beeps. Menu list Problem The display is in a language I cannot read. R Another unit is in use. Wait and try again later. R New messages have been recorded. Listen to the new messages (page 52). Cause/solution R Change the display language (page 14). 62 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 62 TGH26x(en)_1217_ver051.pdf 62 2013/12/17 18:31:51 2013/12/17 18:31:51 Useful Information Problem I cannot register a handset to a base unit. Cause/solution R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 42). Battery recharge Problem The handset beeps and/or flashes. I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. Cause/solution R Battery charge is low. Fully charge the batteries (page 11). R Clean the battery ends (

) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 10). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. I cannot make local calls with the handset using a cellular line. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it

(page 42). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume for landline is turned off. Adjust the R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 35). ringer volume (page 34). R When one handset is selected to ring for cellular calls, other units do not ring. To change the selection, see page 17. R Silent mode is turned on. Turn it off (page 40). R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 19). For assistance, please visit http://www.panasonic.com/help 63 TGH26x(en)_1217_ver051.pdf 63 TGH26x(en)_1217_ver051.pdf 63 2013/12/17 18:31:51 2013/12/17 18:31:51 Useful Information Problem I cannot make or answer cellular calls with the handset. I can make and answer cellular calls but cannot hear a sound. I cannot switch cellular calls from the unit to the cellular phone. I cannot make a call using the landline. I cannot use a cellular line or a landline. I cannot make long distance calls. Caller ID/Talking Caller ID Problem Caller information is not displayed. Cause/solution R Depending on the cellular phones compatibility (page 5), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit (page 18). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The cellular phone is being used separately from your system. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and try again. R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone. R The dialing mode may be set incorrectly. Change the setting (page 15). R The unit can be used to talk on 2 lines at the same time

(for example, 2 cellular lines, or the landline and 1 cellular line). R Make sure that you have long distance service. Cause/solution R You must subscribe to Caller ID service. Contact your service provider/telephone company for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service for landline calls may not be available in some areas. Contact your service provider/

telephone company for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. Caller information is displayed or announced late. R Depending on your service provider/telephone company, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. 64 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 64 TGH26x(en)_1217_ver051.pdf 64 2013/12/17 18:31:51 2013/12/17 18:31:51 Problem Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. The 2nd callers information is not displayed during an outside call. Useful Information Cause/solution R The ringer volume for landline is turned off. Adjust the R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 32). ringer volume (page 34). R When one handset is selected to ring for cellular calls, other units do not announce caller information. To change the selection, see page 17. R The Talking Caller ID feature is turned off. Turn it on R The ring as cell mode is set to On (without Talking R The number of rings for the answering system is set to 2

(page 36). CID). To change the mode, see page 17. rings or Toll saver. Select a different setting

(page 56). R Your unit does not announce caller information while the other devices such as headset or handsets are engaged in a call. R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 37). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 45). changes the time. Set the time adjustment to Manual

(off) (page 36). R Incorrect time information from incoming Caller ID R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your service provider/telephone company and subscribe to the desired service. After subscribing, you may need to contact your service provider/telephone company again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). For assistance, please visit http://www.panasonic.com/help 65 TGH26x(en)_1217_ver051.pdf 65 TGH26x(en)_1217_ver051.pdf 65 2013/12/17 18:31:51 2013/12/17 18:31:51 Useful Information Using Bluetooth devices Problem I cannot copy phonebook entries from a cellular phone. I cannot have a conversation using the headset. Noise is heard during a call on the headset. I cannot connect my headset to the base unit. Cause/solution R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone. R Someone is using a cellular line or headset. Try again later. R Turn the cellular phone off, then turn it on and try again. R If an entry is already stored in the units phonebook, the entry cannot be copied even by selecting another group. R Confirm that the Bluetooth wireless headset supports the HeadSet Profile (HSP) specification. R Your Bluetooth headset is not paired. Pair it (page 49). R Turn your headset off, then turn it on and try again. R A Bluetooth headset can communicate with the base unit within a range of approximately 10 m (33 feet). The connection may be subject to interference from obstructions such as walls or electronic devices. Move closer to the base unit. R Confirm that your headset is turned on. R If your headset is already connected to another Bluetooth device such as your cellular phone, disconnect the headset from your cellular phone, then perform the connecting procedure from the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The headset has not been paired to the base unit. Pair the headset (page 49). Some headset enhanced features are not available. An error tone is heard when I try to program the Bluetooth feature. R The base unit does not support enhanced features such as Last number redial or Call reject. R The Bluetooth feature cannot be accessed immediately after connecting the AC adaptor to the base unit. Wait a few seconds and try again. R The headset has not connected to the base unit yet, even though you performed the connecting procedure setting. Wait a few seconds and try again. 66 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 66 TGH26x(en)_1217_ver051.pdf 66 2013/12/17 18:31:51 2013/12/17 18:31:51 Problem Text message alerts are not displayed or announced. Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. Useful Information Cause/solution R Confirm that the cellular phone supports the Message Access Profile (MAP) specification. R Text message (SMS) alert is set to On(no announce) R If your smartphone does not support Message Access Profile (MAP), download the Text Message Alert app

(page 48). or Off. Set it to On(with name). turned off. R The Bluetooth devices Bluetooth notifications setting is R The handset selected to display and/or announce alerts is R The Bluetooth device or its corresponding cellular line is in use. in use. Cause/solution R The answering system is turned off. Turn it on (page 51). R The answering system does not answer or record calls from cellular lines. messages (page 52). the setting (page 57). R The message memory is full. Erase unnecessary R The recording time is set to Greeting only. Change R Your service provider/telephone companys voice mail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 56) to a lower value, or contact your service provider/telephone company. R The answering system will not answer incoming calls while the other devices such as headset or handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 55). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code

(page 55). R The answering system is turned off. Turn it on (page 56). R You cannot operate the answering system when calling a cellular phone paired to the base unit. The unit does not emit the specified number of rings. R If the first ring is turned off, the number of rings decreases by 1 from the specified number of rings. For assistance, please visit http://www.panasonic.com/help 67 TGH26x(en)_1217_ver051.pdf 67 TGH26x(en)_1217_ver051.pdf 67 2013/12/17 18:31:51 2013/12/17 18:31:51 Useful Information Bluetooth PIN Problem I cannot remember the PIN. Voice mail Problem Voice mail msg. via phone co. is shown on the handset display. How do I remove this message from the display?

Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Change the PIN using the following method. 1 MMENUN (right soft key) #619 2 *7000 3 Enter the new 4-digit PIN. a MOKN 4 Enter the new 4-digit PIN again. a MSAVEN a MOFFN Cause/solution R This notification is displayed when your service provider/

telephone companys voice mail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voice mail number provided by your service provider/

telephone company (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your service provider/telephone company, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:

R To avoid permanent damage, do not use a microwave oven to speed up the drying process. 68 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 68 TGH26x(en)_1217_ver051.pdf 68 2013/12/17 18:31:51 2013/12/17 18:31:51 FCC and other information Useful Information For assistance, please visit http://www.panasonic.com/help 69 TGH26x(en)_1217_ver051.pdf 69 TGH26x(en)_1217_ver051.pdf 69 2013/12/17 18:31:51 2013/12/17 18:31:51 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information 70 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 70 TGH26x(en)_1217_ver051.pdf 70 2013/12/17 18:31:51 2013/12/17 18:31:51 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearbyTVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information For assistance, please visit http://www.panasonic.com/help 71 TGH26x(en)_1217_ver051.pdf 71 TGH26x(en)_1217_ver051.pdf 71 2013/12/17 18:31:51 2013/12/17 18:31:51 Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola 72 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) TGH26x(en)_1217_ver051.pdf 72 TGH26x(en)_1217_ver051.pdf 72 2013/12/17 18:31:51 2013/12/17 18:31:51 ConexionesUnidad base1 Conecte el adaptador de corriente alterna a la unidad presionndolo firmemente.2 Enganche el cable para fijarlo.3 Conecte el adaptador de corriente alterna a la toma de corriente.4 Conecte el cable de la lnea telefnica a la unidad, y despus a la toma telefnica de una sola lnea (RJ11C) hasta que escuche un clic.5 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.Nota:LUse solo el adaptador de corriente alterna Panasonic PNLV226 que se suministra.Cargador1 Conecte el adaptador de corriente alterna a la toma de corriente.1434521 Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 73 TGH26x(en)_1217_ver051.pdf 73 TGH26x(en)_1217_ver051.pdf 73 2013/12/17 18:31:51 2013/12/17 18:31:51 Instalacin y carga de la bateraCargue aproximadamente durante 7 horas.Nota:LUTILICE SOLO bateras recargables de Ni-MH tamao AAA (R03) ().LNO utilice bateras Alcalinas, de Manganeso o de Ni-Cd.LConfirme que las polaridades estn correctas (S, T).LCambie el idioma de la pantalla.Sugerencias de operacinTeclas de funcinAl oprimir una tecla de funcin, puede seleccionar la funcin que aparece directamente encima de ella en la pantalla. Preste atencin a la pantalla para ver qu funciones estn asignadas a las teclas de funcin durante la operacin.Tecla navegadorav (Volumen: {^} o {V}): Ajuste el volumen del receptor o el altavoz mientras habla.{<} k: Vea la entrada del directorio telefnico.{>} REDIAL (Remarcacin): Vea la lista de remarcacin.{V} CID (identificador de llamadas): Vea la lista de personas que llamaron.Cambio de idiomas (Auricular) (predeterminado: English)Cuando instale las bateras por primera vez, es posible que aparezca Date and time Press SELECT. Oprima {OFF} para salir.Idioma de la pantallaIdioma de la gua de voz112{V}{^}{<}{>}LConfirme que aparezca ).Cargando (2{MENU} (tecla de funcin de la derecha) (11) s {r}: Espaol s {GUARDAR} s {OFF} {MENU} (tecla de funcin de la derecha) (112 s {r}: Espaol s {GUARDAR} s {OFF}{^}, {V}, {<}, o {>}: Navegue por diversas listas y elementos. Gua Rpida Espaola 74 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) TGH26x(en)_1217_ver051.pdf 74 TGH26x(en)_1217_ver051.pdf 74 2013/12/17 18:31:51 2013/12/17 18:31:51 Fecha y hora (Auricular)1{MENU} (tecla de funcin de la derecha) (1)12Introduzca el da, mes y ao actuales. s {OK}3Introduzca la hora y minuto actuales (formato de reloj de 24 horas).4{GUARDAR} s {OFF}Cmo grabar el mensaje de saludo del contestador de llamadas para la lnea terrestre (Auricular)Si utiliza un mensaje de saludo pregrabado, no es necesario que grabe su propio mensaje de saludo.1{MENU} (tecla de funcin de la derecha) (3)2 s {r}: S s {SELEC.}2Despus de que se emita un pitido, sostenga el auricular a una distancia aproximada de 20cm (8pulgadas) y hable con claridad en el micrfono (mx. de 2 minutos).3Oprima {PARAR} para dejar de grabar. s {OFF}Enlace a celularPuede conectar su unidad base y telfono celular usando la tecnologa inalmbrica Bluetooth, para poder hacer o responder llamadas a su telfono celular usando su sistema telefnico. Para obtener ms detalles, visite nuestro sitio web: http://www.panasonic.com/link2cellLColoque su telfono celular cerca de la unidad base. Si su telfono celular est demasiado cerca de la unidad base durante la llamada celular, es posible que escuche ruido. Para un mejor funcionamiento, le recomendamos que coloque su telfono celular de 0.6 m a 3 m (2 pies a 10 pies) de la unidad base.1 Lnea celular2 Proveedores de servicios de telefona celular12Marcas registradasLLa marca denominativa y los logotipos de Bluetooth son marcas registradas de Bluetooth SIG, Inc. y cualquier uso de dichas marcas por parte de Panasonic Corporation se hace bajo licencia.LTodas las dems marcas comerciales que se identifican en el presente pertenecen a sus respectivos propietarios. Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 75 TGH26x(en)_1217_ver051.pdf 75 TGH26x(en)_1217_ver051.pdf 75 2013/12/17 18:31:51 2013/12/17 18:31:51 Cmo emparejar un telfono celular con Bluetooth1Auricular:Para CELL 1: {MENU} (tecla de funcin de la derecha) (6241Para CELL 2: {MENU} (tecla de funcin de la derecha) (6242LDespus de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.2Su telfono celular:Mientras el indicador de CELL correspondiente est parpadeando, siga las instrucciones de su telfono celular para entrar al modo de emparejamiento.3Auricular:Espere a que se emita un pitido largo.LEs posible que tarde ms de 10 segundos en completar el emparejamiento.LCuando el indicador de CELL correspondiente se ilumina, esto significa que el telfono celular est conectado a la unidad base. Ya est listo para hacer llamadas regulares de celular.4{OFF}Nota:LAsegrese de que su telfono celular est configurado para conectarse a este producto automticamente. Consulte las instrucciones de operacin de su telfono celular.Unidad base: Indicadores de CELLEstadoSignificadoEncendidoUn telfono celular est conectado. Listo para hacer o recibir llamadas celulares.ParpadeandoLa lnea del celular se est usando.Las entradas del directorio telefnico se estn copiando desde un telfono celular.La unidad base est buscando el telfono celular emparejado.La unidad base est emparejando un telfono celular.Una llamada de celular se pone en espera.Parpadea rpidamenteSe est recibiendo una llamada de celular.Luz apagadaNo hay un telfono celular emparejado con la unidad base.No hay un telfono celular conectado a la unidad base.Auricular: enlace a elementos de la pantalla del celularSe est usando una lnea de celular.*1LCuando parpadea: la llamada celular se pone en espera.LCuando parpadea rpidamente: se est recibiendo una llamada celular.*1La lnea o lneas celulares correspondientes se indican enseguida del elemento.Un telfono celular est conectado.*1 Listo para hacer o recibir llamadas celulares.LCuando est apagado: no hay un telfono celular conectado a la unidad base.*1La lnea o lneas celulares correspondientes se indican enseguida del elemento.Enlace a celularLDependiendo de su telfono celular, es posible que le pida que introduzca el NIP de Bluetooth (predeterminado: 0000). Si su telfono celular muestra la confirmacin de la PassKey en su pantalla, siga las instrucciones para continuar. Gua Rpida Espaola 76 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) TGH26x(en)_1217_ver051.pdf 76 TGH26x(en)_1217_ver051.pdf 76 2013/12/17 18:31:51 2013/12/17 18:31:51 Auricular: enlace a elementos de la pantalla del celularuvSe est haciendo una llamada de celular en esa lnea.La lnea celular est seleccionada para la configuracin.Cmo conectar o desconectar el telfono celularConexin automtica a dispositivos Bluetooth (telfonos celulares o audfono)La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexin. onsulte las instrucciones de operacin para cambiar el intervalo (predeterminado: 1 min).LCuando se sincronizan 3 dispositivos con capacidad Bluetooth (2 telfonos celulares y 1 audfono) a la unidad base, slo 2 dispositivos Bluetooth pueden usarse con la unidad a la vez, y la unidad base pierde su conexin con otros dispositivos Bluetooth. Para restablecer la conexin a los dispositivos Bluetooth automticamente, deje encendida la conexin automtica.Cmo conectar o desconectar manualmente el telfono celularSi no va a utilizar el vnculo del telfono celular emparejado a la funcin del celular temporalmente (por ejemplo, si no quiere que la unidad timbre cuando su lnea celular reciba una llamada), puede desconectar su telfono celular de la unidad base. Si desea usarlo de nuevo, reconecte el telfono celular a la unidad base.LAunque haya desconectado un telfono celular emparejado de la unidad base, si lo coloca dentro del alcance de la unidad base durante el intervalo de conexin automtica, es posible que se conecte automticamente a la unidad base.LLos telfonos celulares desconectados no se desemparejan de la unidad base, as que no es necesario emparejarlos de nuevo con ella.1Para conectarlo o desconectarlo:Para CELL 1: {MENU} (tecla de funcin de la derecha) (6251 (Se emite un pitido largo.)Para CELL 2: {MENU} (tecla de funcin de la derecha) (6252 (Se emite un pitido largo.)2{OFF}Modo exclusivo para la lnea celular (si no utiliza la lnea terrestre) (Auricular)Si no utiliza la lnea terrestre, configure el modo exclusivo para la lnea celular para usar esta unidad en forma ms conveniente.LSi enciende el Modo Ln. Cel., desconecte el cable de la lnea telefnica de la unidad base. De lo contrario no ser posible activar el Modo Ln. Cel..1{MENU} (tecla de funcin de la derecha) (1572Para encenderlo:{r}: Encendido s {SELEC.} s {r}: S s {SELEC.}Para apagarlo: {r}: Apagado s {SELEC.}Enlace a celular Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 77 TGH26x(en)_1217_ver051.pdf 77 TGH26x(en)_1217_ver051.pdf 77 2013/12/17 18:31:51 2013/12/17 18:31:51 Operaciones bsicasCmo hacer y contestar llamadas (Auricular)Para hacer llamadas de celular1Marque el nmero telefnico. s {CEL.}LCuando el modo exclusivo para la lnea celular est configurado, tambin puede oprimir {C}/{s} en lugar de {CEL.}.LCuando solo hay 1 telfono celular emparejado, la unidad comienza a marcar.2Cuando hay 2 telfonos celulares emparejados:{r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer llamadas por la lnea terrestreMarque el nmero telefnico. s {C}/{s}Para contestar llamadas{C}/{s}/{w}Para colgar{OFF}Para ajustar el volumen del receptor o del altavozOprima {^} o {V} repetidamente mientras habla.Cmo hacer una llamada usando la lista de remarcacin1{>} REDIAL s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular:Cuando solo 1 telfono celular est emparejado: {CEL.}oCuando 2 telfonos celulares estn emparejados:{CEL.} s {r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer una llamada terrestre:{C}Para ajustar el volumen del timbre (lnea de celular/lnea terrestre)Oprima {^} o {V} repetidamente para seleccionar el volumen deseado mientras timbra. Gua Rpida Espaola 78 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) TGH26x(en)_1217_ver051.pdf 78 TGH26x(en)_1217_ver051.pdf 78 2013/12/17 18:31:51 2013/12/17 18:31:51 Directorio telefnico (Auricular)Para aadir entradas1{<} k s {MENU}2{r}: Agregar Ent. Nueva s {SELEC.}3{r}: (Nombre) s {SELEC.}4Introduzca el nombre de la persona (mx. 16 caracteres). s {OK}5{r}: Seleccione la ubicacin del nmero telefnico deseado. s {SELEC.}6Introduzca el nmero telefnico de la persona (mx. 24 dgitos). s {OK}7{r}: Seleccione la etiqueta deseada. s {SELEC.}LPara almacenar 2 o 3 nmeros telefnicos, repita los pasos 5 a 7.8{r}: Seleccione la configuracin actual del grupo. s {SELEC.}9{r}: Seleccione el grupo deseado. s {SELEC.}10{r}: <Guardar> s {SELEC.} s {OFF}Para hacer llamadas1{<} k s {r}: Seleccione la entrada deseada.2Para hacer una llamada celular:Cuando solo 1 telfono celular est emparejado: {CEL.} s {r}: Seleccione el nmero telefnico deseado. s {LLAMAR}oCuando 2 telfonos celulares estn emparejados:{CEL.} s {r}: Seleccione el nmero telefnico deseado. s {LLAMAR} s {r}: Seleccione el telfono celular deseado. s {SELEC.}Para hacer una llamada terrestre:{C} s {r}: Seleccione el telfono celular deseado. s {C}Contestador de llamadas de la lnea terrestre (Unidad base)Contestador encendido/apagadoOprima {ANSWER ON/OFF} para encender y apagar el contestador de llamadas.Para escuchar mensajes{P} (PLAY)Contestador de llamadas de la lnea terrestre (Auricular)Para escuchar mensajesPara escuchar mensajes nuevos:{REPRO.} o {MENU} (tecla de funcin de la derecha) (323Para escuchar todos los mensajes:{MENU} (tecla de funcin de la derecha) (324Operaciones bsicas Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 79 TGH26x(en)_1217_ver051.pdf 79 TGH26x(en)_1217_ver051.pdf 79 2013/12/17 18:31:51 2013/12/17 18:31:51 Cmo usar dispositivos BluetoothCopiado de entradas del directorio telefnico desde un telfono celular con Bluetooth (transferencia del directorio telefnico)Puede copiar entradas del directorio telefnico desde los telfonos celulares emparejados o desde otros telfonos celulares (no emparejados) al directorio telefnico de la unidad.1Auricular: {MENU} (tecla de funcin de la derecha) (6182Auricular:Para copiar desde telfonos celulares emparejados: {r}: Seleccione el telfono celular deseado. s {SELEC.}LLos elementos copiados se almacenan en el grupo (Cel. 1 o Cel. 2) en el que est emparejado el telfono celular. Para copiar desde otros telfonos celulares (no emparejados): {r}: Otro celular s {SELEC.} s {r}: Seleccione el grupo al que desea copiar. s {SELEC.}3Cuando aparezca Transf. datos del directorio del celular : Vaya al paso 4.Cuando aparezca el men Selec. modo : {r}: Seleccione Auto o Manual. s {SELEC.}Auto: Descargue todas las entradas del telfono celular automticamente. Vaya al paso 5.Manual: Copie las entradas que seleccion.LEl men Selec. modo aparece solo cuando el telfono celular soporta PBAP (Perfil de Acceso a Directorio Telefnico) para la conexin Bluetooth.4Telfono celular:Siga las instrucciones de su telfono celular para copiar las entradas del directorio telefnico. LPara otros telfonos celulares (no emparejados), necesita buscar y seleccionar la unidad base. Quizs requiera el NIP de Bluetooth (predeterminado: 0000). Si su telfono celular muestra la confirmacin de la PassKey en su pantalla, siga las instrucciones para continuar.LLas entradas que se estn copiando aparecen en el auricular. 5Auricular: Espere a que aparezca Completo. s {OFF} Gua Rpida Espaola 80 Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) TGH26x(en)_1217_ver051.pdf 80 TGH26x(en)_1217_ver051.pdf 80 2013/12/17 18:31:52 2013/12/17 18:31:52 Cmo usar un audfono Bluetooth (opcional) para llamadas por la lnea terrestreAl emparejar un audfono Bluetooth con la unidad base, podr tener conversaciones inalmbricas a manos libres para llamadas terrestres.LSolo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 lneas celulares o el audfono y 1 lnea celular).Cmo emparejar un audfono con la unidad base1Su audfono:Configure su audfono en modo de emparejamiento.LConsulte las instrucciones de operacin de su audfono.2Auricular:{MENU} (tecla de funcin de la derecha) (6211 Empareje usando el auricular.2 Emparejamiento3Si el NIP de su audfono es 0000, vaya al paso 4. Si el NIP de su audfono es diferente a 0000, oprima {BORRAR} y despus introduzca el NIP de su audfono.LPor lo general, el NIP predeterminado es 0000. Consulte las instrucciones de operacin del audfono.4Oprima {OK}, y despus espere a que se emita un pitido largo. s {OFF}LCuando el indicador HEADSET de la unidad base se ilumina, usted est listo para usar el audfono.Cmo operar un audfono inalmbrico con Bluetooth usando una lnea terrestreConsulte las instrucciones de operacin de su audfono para ver cmo funciona.NCmo contestar llamadas de la lnea terrestre con su audfonoPara contestar una llamada de lnea terrestre, encienda su audfono. Para ello, consulte las instrucciones de operacin de su audfono.Cuando termine de hablar, apague su audfono. Para ello, consulte las instrucciones de operacin de su audfono.LSi no puede colgar la llamada usando su audfono, oprima {P} (STOP) en la unidad base.NCmo cambiar entre la unidad base y su audfono Puede cambiar entre la unidad base y su audfono mientras escucha los mensajes grabados en el contestador de llamadas de la unidad base.LSolo puede cambiar entre la unidad base y su audfono.Para cambiar a su audfono:Encienda el audfono. Para ello, consulte las instrucciones de operacin de su audfono.Cmo usar dispositivos Bluetooth21 Gua Rpida Espaola Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls) 81 TGH26x(en)_1217_ver051.pdf 81 TGH26x(en)_1217_ver051.pdf 81 2013/12/17 18:31:52 2013/12/17 18:31:52 Preguntas frecuentesPreguntaCausa y solucinPor qu aparece _?LEl auricular est demasiado lejos de la unidad base. Acrquelo.LEl adaptador para corriente de la unidad base no est conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base.LEl auricular no est registrado en la unidad base. Regstrelo.1Auricular: {MENU} (tecla de funcin de la derecha) (13)2Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.3Auricular: Oprima {OK}, y despus espere hasta que suene un pitido largo. Por qu no es posible emparejar un telfono celular con la unidad base?LDependiendo de la compatibilidad del telfono celular, es posible que no pueda emparejarlo con la unidad base. Para obtener ms informacin, visite http://www.panasonic.com/link2cellLConfirme que la funcin de Bluetooth de su telfono celular est encendida. Es posible que necesite encender esta funcin dependiendo de su telfono celular.Cmo se incrementa el nivel de volumen del auricular?LOprima la tecla de navegacin {^} repetidamente mientras habla.Por qu hay ruido o se corta la conversacin?LTrate de reubicar la unidad base de forma que se minimice la distancia al auricular.LSi ocurre el mismo problema aunque el auricular se encuentre enseguida de la unidad base, visite: http://www.panasonic.com/supportEs posible aadir otro auricular accesorio a mi unidad base?LS, puede aadir hasta 6 auriculares (incluyendo los que se venden con su unidad base) a una sola unidad base.LPara adquirir auriculares accesorios adicionales (KX-TGHA20),visite: http://www.pstc.panasonic.comLos usuarios TTY (usuarios con impedimentos auditivos o del habla) pueden llamar al 1-866-605-1277.Es posible mantener cargando las bateras todo el tiempo?LPuede dejar el auricular en la unidad base o el cargador en cualquier momento. Esto no daa las bateras.Cmo se contestan las llamadas en espera (segunda llamada)?LOprima {CALL WAIT} cuando escuche el tono de llamada en espera. Appendix Customer services 82 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 82 TGH26x(en)_1217_ver051.pdf 82 2013/12/17 18:31:52 2013/12/17 18:31:52 Customer Services Directory (United States and Puerto Rico)Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:http://www.panasonic.com/helpor, contact us via the web at: http://www.panasonic.com/contactinfoFor hearing or speech impaired TTY users, TTY: 1-877-833-8855For hearing or speech impaired TTY users, TTY: 1-866-605-1277Purchase Parts, Accessories and Owners Manual online for all Panasonic Products by visiting our Web Site at:http://www.pstc.panasonic.comor, send your request by E-mail to:npcparts@us.panasonic.comYou may also contact us directly at:1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)Panasonic National Parts Center20421 84th Avenue S., Kent, WA 98032(We accept Visa, MasterCard, Discover Card, American Express.)Accessory Purchases (United States and Puerto Rico) Warranty (For United States and Puerto Rico) Appendix For assistance, please visit http://www.panasonic.com/help 83 TGH26x(en)_1217_ver051.pdf 83 TGH26x(en)_1217_ver051.pdf 83 2013/12/17 18:31:52 2013/12/17 18:31:52 Limited Warranty CoverageIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (Limited Warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.PartsLaborOne (1) YearOne (1) YearDuring the Labor Limited Warranty period there will be no charge for labor. During the Parts Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new.Online Repair RequestTo submit a new repair request and for quick repair status visit our Web Site athttp://www.panasonic.com/repairWhen shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. P.O. Boxes are not acceptable. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty.For Limited Warranty service for headsets if a headset is included with this product please follow instructions above.IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAIDAND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Panasonic Telephone ProductsLimited WarrantyMail-In Service--Online Appendix 84 For assistance, please visit http://www.panasonic.com/help TGH26x(en)_1217_ver051.pdf 84 TGH26x(en)_1217_ver051.pdf 84 2013/12/17 18:31:52 2013/12/17 18:31:52 Limited Warranty Limits And ExclusionsThis Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the addresses listed for the warrantor.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.L Carefully pack your unit, preferably in the original carton.L Attach a letter, detailing the symptom.L Send the unit to Panasonic Exchange Center, prepaid and adequately insured.L Do not send your unit to Panasonic Corporation of North America listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products.When you ship the product Index

3-way conference: 23 A Additional handset: 42 Alarm: 39 Answering calls: 21 Answering system Call screening: 56 Erasing messages: 52, 53, 56 Greeting message: 51 Greeting only: 57 Listening to messages: 52, 55 Message list: 52 New message alerting: 53 Number of rings: 56 Recording time: 57 Remote access code: 55 Remote operation: 55 Ring count: 56 Toll saver: 56 Turning on/off: 51 Auto talk: 21, 37 B Battery: 10, 11 Bluetooth wireless technology Cellular phone (Link to cell): 16 Headset: 49 Phonebook transfer: 47 Booster (Clarity booster): 22 C Call block: 40 First ring: 41 Call share: 22, 37 Call waiting: 22 Call Waiting Caller ID: 22 Caller ID number auto edit: 37, 45 Caller ID service: 44 Caller list: 44 Caller list edit: 45 Cellular calls: 20 Cellular phone Pairing: 16 Unpairing: 16 Chain dial: 29 CID (Caller ID): 44, 45 Conference calls: 23 Control type: 12 Customer support: 38 D Date and time: 14 Dialing mode: 15 Direct command code: 31 Index Display Color: 37 Display mode: 37 Language: 14 LCD backlight: 37 Wallpaper: 37 E Eco mode: 11 Equalizer: 22 Error messages: 60 Flash: 22, 37 F G Groups: 27 H Handset Deregistration: 42 Locator: 12 Name: 42 Registration: 42 Hold: 21 Intercom: 24 I K Key detector: 33, 36 L Key tone: 37 Landline calls: 20 Line mode: 37 Link to cell Area code: 19 Auto connection: 17 Cellular line only mode: 18 Cellular line selection: 19 Connection: 18 Ring as cell mode: 17 Select unit to ring: 17 Text message (SMS: Short Message Service) alert: 48 M Making calls: 20 Missed calls: 44 Mute: 21 N Noise reduction: 22 P Pause: 21 Phonebook: 26 PIN: 19 Power failure (power back-up operation): 24 R Redialing: 20 Ringer ID: 27 Ringer tone: 34, 35 Rotary/pulse service: 22 Silent mode: 40 Smart function key (NR key): 15 Speed dial: 29 SP-PHONE (Speakerphone): 20 Talking Caller ID: 44 S T TGH26x(en)_1217_ver051.pdf 85 TGH26x(en)_1217_ver051.pdf 85 2013/12/17 18:31:52 2013/12/17 18:31:52 85 Index Temporary tone dialing: 22 Time adjustment: 36 Transferring calls: 23 Troubleshooting: 61 TTY: 82 VM (Voice mail): 58 Voice guidance language: 14 Voice mail: 56, 58 Volume V Receiver: 20 Ringer (Base unit): 21, 34, 35 Ringer (Handset): 21, 34, 35 Speaker: 20 W Wall mounting (Charger only): 59 86 TGH26x(en)_1217_ver051.pdf 86 TGH26x(en)_1217_ver051.pdf 86 2013/12/17 18:31:52 2013/12/17 18:31:52 Notes 87 TGH26x(en)_1217_ver051.pdf 87 TGH26x(en)_1217_ver051.pdf 87 2013/12/17 18:31:52 2013/12/17 18:31:52 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.

(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2013 Printed in Malaysia

*PNQX6421ZA*

*PNQX6421ZA*

PNQX6421ZA TT1113MG0 TGH26x(en)_1217_ver051.pdf 88 TGH26x(en)_1217_ver051.pdf 88 2013/12/17 18:31:52 2013/12/17 18:31:52 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions. If your product is not working properly. IMPORTANT!Visit our Web site: http://www.panasonic.com/help LFAQ and troubleshooting hints are available.Two Riverfront Plaza, Newark, NJ 07102-5490