96NKX-TGL430 DECT 6.0 Base User Manual

 

Operating Instructions Cordless Telephone with Digital Answering Machine Model No. KX-TGL430 KX-TGL432 KX-TGL433 KX-TG3683 Model shown is KX-TGL430. Before initial use, see Getting Started on page 9. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte Gua Rpida Espaola, pgina 54. For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A. Please register your product: http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 1 2015/10/06 19:23:55 Turning the answering system on/off .........35 Greeting message ......................................35 Listening to messages ...............................36 Advanced new message alerting features ......................................................37 Remote operation .......................................38 Answering system settings .........................40 Useful Information Voicemail service .......................................41 Wall mounting ............................................42 Error messages ..........................................45 Troubleshooting .........................................46 FCC and other information .........................51 Gua Rpida Espaola Gua Rpida Espaola ...............................54 Appendix Customer services .....................................59 Limited Warranty (ONLY FOR U.S.A.) .......60 Index Index...........................................................62 Table of Contents Introduction Model composition .......................................3 Accessory information ..................................3 Important Information For your safety .............................................5 Important safety instructions ........................6 For best performance ...................................6 Other information .........................................7 Specifications ...............................................8 Getting Started Setting up .....................................................9 Controls ......................................................11 Display icons ..............................................12 Language settings ......................................12 Date and time .............................................13 Recording your greeting message .............13 Other settings .............................................13 Making/Answering Calls Making calls ...............................................14 Redialing ....................................................14 Answering calls ..........................................15 Useful features during a call .......................15 Intercom .....................................................17 Call Block Call block feature .......................................18 Storing unwanted callers ............................18 Phonebook Phonebook .................................................20 Speed dial ..................................................22 Programming Menu list .....................................................23 Alarm ..........................................................29 Silent mode ................................................29 Baby monitor ..............................................30 Other programming ....................................32 Registering a unit .......................................32 Caller ID Service Using Caller ID service ...............................33 Caller list ....................................................33 Answering System Answering system ......................................35 2 TGL43x(en)_1006_ve003.pdf 2 2015/10/06 19:23:56 Introduction Model composition Series KX-TGL430 series Model No. KX-TGL430 KX-TGL432 KX-TGL433 KX-TG3683 Base unit Part No. KX-TGL430 KX-TGL430 KX-TGL430 KX-TGL430 Handset Part No. KX-TGLA40 KX-TGLA40 KX-TGLA40 KX-TGLA40 Quantity 1 2 3 3 Accessory information Supplied accessories No. Accessory item/Part number A AC adaptor/PNLV226-0X B Telephone line cord*1 C Wall mounting adaptor/PNKL1061Z2 D Rechargeable batteries*2 E Handset cover*3/PNYNTGLA40BR F Charger/PNLC1070YB Quantity KX-TGL430 KX-TGL432 KX-TGL433 KX-TG3683 1 1 1 2 1 1 1 1 4 2 1 1 1 1 6 3 2

*1 PQJA10075Y (Black cord), PQJA10075Z (Transparent cord)

*2 See page 4 for replacement battery information.

*3 The handset cover comes attached to the handset. B C D E A F For assistance, please visit http://shop.panasonic.com/support 3 TGL43x(en)_1006_ve003.pdf 3 2015/10/06 19:23:56 Introduction Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 59). Accessory item Rechargeable batteries Range extender Key detector Model number/Specifications HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type:

Nickel metal hydride (Ni-MH) 2 x AAA (R03) size for each handset KX-TGA405*2 KX-TGA20*3

*1 Replacement batteries may have a different capacity from that of the supplied batteries.

*2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://shop.panasonic.com/support

*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site:

http://www.panasonic.com/tga20 Other information R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. Expanding your phone system Handset (optional): KX-TGLA40 You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of the supplied handsets. 4 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 4 2015/10/06 19:23:56 For your safety To prevent severe injury and loss of life/

property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire. R Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support R Unplug from power outlets and never touch the inside of the product if its casing has been broken open. R Never touch the plug with wet hands. Danger of electric shock exists. Installation R To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture. R Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. Important Information R Do not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects. Operating safeguards R Unplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners. R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use. Medical R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF

(radio frequency) energy. (The product operates in the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).) R Do not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. CAUTION Installation and location R Never install telephone wiring during an electrical storm. R Never install telephone line jacks in wet locations unless the jack is specifically designed for wet locations. R Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. R Use caution when installing or modifying telephone lines. R The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible. For assistance, please visit http://shop.panasonic.com/support 5 TGL43x(en)_1006_ve003.pdf 5 2015/10/06 19:23:56 Important Information R This product is unable to make calls when:

the handset batteries need recharging or have failed. there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed. R Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. R Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual. R Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode. Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY

(1-800-822-8837) for information on how to recycle this battery. Important safety instructions When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For best performance Base unit location/avoiding noise The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment. away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones. facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.) R Coverage and voice quality depends on the local environmental conditions. 6 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 6 2015/10/06 19:23:56 Important Information Notice for product disposal, transfer, or return R This product can store your private/

confidential information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product. Notice R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to R Do not place heavy objects on top of the direct sunlight. product. R When you leave the product unused for a long period of time, unplug the product from the power outlet. R The product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 C (32 F) or greater than 40 C (104 F). Damp basements should also be avoided. R The maximum calling distance may be shortened when the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. Routine care R Wipe the outer surface of the product with a soft moist cloth. R Do not use benzine, thinner, or any abrasive powder. Other information CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. For assistance, please visit http://shop.panasonic.com/support 7 TGL43x(en)_1006_ve003.pdf 7 2015/10/06 19:23:56 Important Information Specifications R Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) R Frequency range:

1.92 GHz to 1.93 GHz R RF transmission power:

115 mW (max.) R Power source:

120 V AC, 60 Hz R Power consumption:

Base unit:

Standby: Approx. 0.9 W Maximum: Approx. 3.8 W Charger:

Standby: Approx. 0.1 W Maximum: Approx. 1.8 W R Operating conditions:

0 C 40 C (32 F 104 F), 20 % 80 %

relative air humidity (dry) 8 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 8 2015/10/06 19:23:56 Setting up Connections n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Fasten the cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack

(RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note:

R Use only the supplied Panasonic AC adaptor PNLV226. Getting Started n Charger Connect the AC adaptor to the power outlet. Battery installation R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (

). R Do NOT use alkaline/manganese/Ni-Cd batteries. R Confirm correct polarities (

,

). R Follow the directions on the display to set up the unit. For assistance, please visit http://shop.panasonic.com/support 9 TGL43x(en)_1006_ve003.pdf 9 2015/10/06 19:23:56 453421111 Getting Started Battery charging Charge for about 7 hours. R Confirm Charging is displayed (

R When the batteries are fully charged, Fully charged is displayed.

). Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. During a power failure The unit cannot be used to make or receive calls during a power failure. We recommend connecting a corded-type telephone that does not use an AC adaptor to your telephone line. Note for battery installation R Use the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 4, 6. Note for battery charging R It is normal for the handset to feel warm during charging. R Clean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity. Battery level Icon Battery level High Medium Low Needs charging. Empty Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 12 hours max.*1 8 days max.*1

*1 If eco mode is on. Note:

R Actual battery performance depends on usage and ambient environment. Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated, is displayed. R Eco mode is turned off when the clarity booster is activated (page 16). 10 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 10 2015/10/06 19:23:56 11 Controls Handset Getting Started n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. Navigator key MDN, MCN, MFN, or MEN: Scroll through various lists and items. MDN (Mute): Put the call on mute. MFN W: View the phonebook entry. MEN (Redial/CID) (Caller ID): View the redial list or caller list. MCN (Call Block): View the call block list. N (TALK) Shoulder rest Speaker MjN/MkN (VOL.: Volume up/down) M MZN (Speakerphone) Dial keypad (*: TONE) Microphone Receiver Display MOFFN Charge contacts For assistance, please visit http://shop.panasonic.com/support 11 TGL43x(en)_1006_ve003.pdf 11 2015/10/06 19:23:56 BAAACBDFEDFEHIJG Getting Started Base unit Charge contacts Speaker N (Repeat) M N (Skip) M N (PLAY/STOP) M Message indicator MjN/MkN (VOL.: Volume up/down) MANSWER ON/OFFN ANSWER ON/OFF indicator (

MLOCATORN R You can locate a misplaced handset

) by pressing MLOCATORN. MERASEN Display icons Handset display items Item Meaning Within base unit range Out of base unit range Item Z In use Line in use Meaning The line is in use. R When flashing:

The call is put on hold. R When flashing rapidly: An incoming call is now being received. Eco mode is on. (page 10) Noise reduction is set.

(page 16) Equalizer is set. (page 16) Speakerphone is on.

(page 14) Ringer volume is off.

(page 25) Silent mode is on. (page 29) Call sharing mode is off.

(page 27) Alarm is on. (page 29) Handset number Battery level Blocked call (page 18) Clarity booster is on.

(page 16) Baby monitor is activated. The name/number displayed next to the icon indicates the monitoring unit. (page 30) Answering system is being used by another handset. Someone is using the line. Language settings Display language 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN a MOFFN 12 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 12 2015/10/06 19:23:56 IABHGECDF Getting Started Other settings Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone. Tone: For tone dial service. Pulse: For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. a MSAVEN a MOFFN Voice announcement language You can select the language used for the following features. Answering system guidance Talking Caller ID The default setting is English. 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN a MOFFN Date and time 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 12, 2016 07 12 16 3 MOKN 4 Enter the current hour and minute

(12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 *: Select AM or PM. 6 MSAVEN a MOFFN Note:

R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 35 for details. 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 Record a greeting message. a MSTOPN a MOFFN For assistance, please visit http://shop.panasonic.com/support 13 TGL43x(en)_1006_ve003.pdf 13 2015/10/06 19:23:56 Making/Answering Calls Making calls 1 Lift the handset and then dial the phone number. R To correct a digit, press MCLEARN. 2 Press M

/ZN to make the call. R To make the call using the speakerphone, press and hold M ZN for a few seconds.

/

R While talking, you can switch between the receiver and the speakerphone by pressing M

/ZN. 3 When finished, press MOFFN or place the handset on the base unit or charger. Note:

R In step 1, you can store the dialed phone number to the phonebook by pressing MSAVEN. Adjusting the receiver or speaker volume Press MjN or MkN repeatedly while talking. Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 21). Example: If you need to dial the line access number 9 when making outside calls with a PBX:

1 9 a MDN (Pause) 2 Dial the phone number. a M Note:

R A 3.5 second pause is inserted each time

/ZN MDN (Pause) is pressed. Redialing Making a call using the redial list The redial list displays up to 20 previously dialed phone numbers (48 digits max. each). 1 MEN (Redial/CID) R If there is a missed call, Missed call is displayed. To display the redial list, press MEN (Redial/CID) again. 2 MbN: Select the desired entry. 3 M

/ZN Redial mode You can change the redial list display order. Most dialed (default): The most recently called item is displayed first. Subsequent items are displayed in order according to how frequently they are dialed. The number of times the item was dialed

(example:

) is also displayed. Recent dialed: Items are displayed in 1 MEN (Redial/CID) the order they were dialed. R If there is a missed call, Missed call is displayed. To display the redial list, press MEN (Redial/CID) again. 2 MMENUN a MbN: Redial mode a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Erasing a number in the redial list 1 MEN (Redial/CID) R If there is a missed call, Missed call is displayed. To display the redial list, press MEN (Redial/CID) again. 2 MbN: Select the desired entry. a 3 MbN: Yes a MSELECTN a MOFFN MERASEN 14 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 14 2015/10/06 19:23:56 Erasing all numbers in the redial list 1 MEN (Redial/CID) R If there is a missed call, Missed call is displayed. To display the redial list, press MEN (Redial/CID) again. 2 MMENUN a MbN: Erase alla 3 MbN: Yes a MSELECTN a MOFFN MSELECTN Answering calls 1 When the unit rings, lift the handset. n To answer using the receiver Press M

/ZN. n To answer using the speakerphone Press and hold M seconds.

/ZN for a few 2 When you finish talking, press MOFFN or place the handset on the base unit or charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 27). Temporary handset ringer off: You can turn the ringer off temporarily by pressing and holding 0 for a few seconds. Adjusting the ringer volume Handset Press MjN or MkN repeatedly to select the desired volume. R To turn the ringer off, press MkN repeatedly. Base unit Press MjN or MkN repeatedly to select the desired volume. R To turn the ringer off, press and hold MkN until the unit beeps. Making/Answering Calls Useful features during a call Hold 1 Press MMENUN during an outside call. 2 MbN: Hold a MSELECTN 3 To release hold, press M

/ZN. R Another handset user can take the call by pressing M

/ZN. Note:

R After holding for 10 minutes, the call is disconnected. Mute 1 Press MDN (Mute) during a call. 2 To return to the call, press MDN (Mute). Flash Flash button allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. Note:

R To change the flash time, see page 27. For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd callers information is displayed on the unit that is in use after you hear the call waiting tone. 1 Press MACCEPTN to answer the 2nd call. 2 To switch between calls, press MFLASHN. 15 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 15 2015/10/06 19:23:56 Making/Answering Calls Note:

R MACCEPTN and MFLASHN are soft keys visible on the display during a call. R Please contact your phone service provider for details and availability of this service in your area. Temporary tone dialing (for rotary/pulse service users) Press * (TONE) before entering access numbers which require tone dialing. Handset clarity booster This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on, is displayed. Handset noise reduction This feature allows you to hear the voice of the person you are talking to more clearly, by reducing the surrounding noise coming from the other partys telephone. 1 Press MMENUN while talking. 2 MbN: Noise reduction on or Noise reduction off a MSELECTN Note:

R Depending on the environment where this handset is being used, this feature may not be effective. R This feature is not available while using the speakerphone. Handset equalizer This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand. 1 Press MMENUN while talking. 2 MbN: Equalizer a MSELECTN 16 3 MbN: Select the desired setting. 4 Press MOKN to exit. Note:

R Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off. R This feature is not available while using the R When both the Equalizer setting and speakerphone. noise reduction are activated, shown on the display. is Call share You can join an existing outside call. To join the conversation, press M the other unit is on an outside call. Note:

R A maximum of 3 parties (including 1 outside

/ZN when party) can join a conversation using 2 extensions. (3-way conference) R To prevent other users from joining your conversations with outside callers, turn call sharing mode off (page 27). Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between 2 handsets. 1 During an outside call, press MMENUN. 2 MbN: Intercom a MSELECTN 3 MbN: Select the desired unit. a MSELECTN 4 Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call. 5 To complete the transfer:

Press MOFFN. To establish a conference call:

MMENUN a MbN: Conference a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can continue the conversation. For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 16 2015/10/06 19:23:56 Making/Answering Calls 2 When you finish talking, press MOFFN. Turning auto intercom on/off This feature allows the handset to answer intercom calls automatically when it is called.

/ZN. When this You do not need to press M feature is set to On, the monitoring handset for the baby monitor feature (page 30) will also answer baby monitor calls automatically. The default setting is Off. 1 MMENUN#273 2 MbN: Select the desired setting. a MSAVEN a MOFFN R To put the outside call on hold:

MMENUN a MbN: Hold a MSELECTN To resume the conference: MMENUN a MbN: Conference a MSELECTN R To cancel the conference: MMENUN a MbN: Stop conference a MSELECTN You can continue the conversation with the outside caller. Intercom Intercom calls can be made between handsets. Note:

R When paging unit(s), the paged unit(s) beeps for 1 minute. R If you receive an outside call while talking on the intercom, the interrupt tone sounds. To finish intercom, press MOFFN. To answer the call, press M

/ZN. R To change the ringer volume and ringer tone for intercom, see page 25. Making an intercom call 1 MMENUN a MbN: Intercom a 2 MbN: Select the desired unit or Voice MSELECTN paging. a MSELECTN R If you select Voice paging, speak into the microphone after the beep. Your voice will be heard using the speakers of all handsets, until a handset user answers your page or until you press MOFFN. 3 When you finish talking, press MOFFN. Note:

R You can also use the MINTERCOMN soft key, if displayed, to make intercom calls. R You cannot use voice paging if a handset is in use. Try again later. Answering an intercom call 1 Press M

/ZN to answer the page. For assistance, please visit http://shop.panasonic.com/support 17 TGL43x(en)_1006_ve003.pdf 17 2015/10/06 19:23:56 Call Block Call block feature You can press the MCN (Call Block) key in the following situations to disconnect the current call and add a phone number to the call block list:

when an incoming call is being received when an incoming call is being recorded by the answering system situations shown above. when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCN (Call Block) under the 2 Confirm the call block number and press MYESN. R The call block number is stored in the call block list, Caller blocked is displayed, and then the call is disconnected. Note:

R If the call has no phone number, the call is blocked but it is not stored in the call block list. R The call block feature is not available for intercom calls or calls received by call waiting. R Blocked calls are logged in the caller list. Storing unwanted callers The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). Block a single number: The unit blocks calls from specific phone numbers stored in the call block list. Block range of numbers: The unit blocks calls that begin with a number stored in the call block list, such as a toll-free phone number prefix or certain area codes. Block unknown CID: The unit blocks Single phone numbers and ranges of numbers can be stored in the call block list up to 250 items in total. Blocking unwanted callers:

18 calls that have no phone number. When a call is received, the unit rings once*1 while caller information is being received. If the callers phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call.

*1 If you do not want this one ring to sound, select No in Muting the first ring

(page 19). Storing a single phone number Important:

R We recommend storing 10 digits (including the area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked. Adding call blocked numbers from the caller list 1 MEN (Redial/CID) R If the redial list is displayed, press MEN

(Redial/CID) again to switch to the caller list. 2 MbN: Select the desired entry to be blocked. aMMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a MSAVEN a MbN: Call block a MSELECTN a Go to step 4. 3 MbN: Save call block a MSELECTN 4 MbN: Yes a MSELECTN 5 Edit the phone number if necessary (24 digits max.). a MSAVEN a MOFFN Adding call blocked numbers manually 1 MCN (Call Block) 2 MbN: Block a single number a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the phone number (24 digits max.). MSELECTN aMSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 18 2015/10/06 19:23:56 Call Block 4 To edit a number:

MEDITN a Edit the number. a MSAVEN a MOFFN To erase a number:

MERASEN a MbN: Yes a MSELECTN a MOFFN Note:

R When editing, press the desired dial key to add digits and press MCLEARN to erase digits. Erasing all call block numbers 1 MCN (Call Block) 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MMENUN a MbN: Erase all a 4 MbN: Yes a MSELECTN 5 MbN: Yes a MSELECTN a MOFFN MSELECTN Storing a range of number 1 MCN (Call Block) 2 MbN: Block range of numbers a 3 MMENUN a MbN: Add a MSELECTN 4 Enter the desired number (2-8 digits). a MSELECTN MSAVEN a MOFFN Blocking incoming calls that have no phone number You can block calls when no phone number is provided, such as private callers or out of area calls. 1 MCN (Call Block) 2 MbN: Block unknown CID a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Muting the first ring This feature can mute the first ring when a call is received. No: The first ring is muted for all calls. Yes: The first ring for all calls, including calls from blocked phone numbers, will be heard. 1 MCN (Call Block) 2 MbN: One ring for blocked call 3 MbN: Select the desired setting. a a MSELECTN MSAVEN a MOFFN Viewing/editing/erasing call block numbers 1 MCN (Call Block) 2 MbN: Block a single number or Block range of numbers a MSELECTN 3 MbN: Select the desired entry. R After viewing, press MOFFN to exit. For assistance, please visit http://shop.panasonic.com/support 19 TGL43x(en)_1006_ve003.pdf 19 2015/10/06 19:23:56 Phonebook Phonebook You can add 100 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 20). Important:

R All entries can be shared by any registered handset. Adding phonebook entries 1 MFN W a MMENUN 2 MbN: Add new entry a MSELECTN 3 Enter the partys name. a MOKN 4 Enter the partys phone number. a MOKN 5 MbN: Select the desired group. a MSELECTN 2 times a MOFFN Note:

R In step 3, you can switch the language for entering characters.

# a MbN: Select the desired language. a MOKN Entering characters Press the dial key that corresponds to the desired character. Press repeatedly to scroll through the available characters. The following operations are also available. Key MGN MFN MEN MCLEARN Operation Switch between the uppercase and lowercase (A a) Move the cursor Erase the character or number R To erase all, press and hold it. R To enter another character that is located on the same dial key, first press MEN to move the cursor to the next space. R If you do not press any dial key within 2 seconds after entering a character, the character is fixed and the cursor moves to the next space. Storing a redial list number to the phonebook Phone numbers of up to 24 digits can be stored in the phonebook. 1 MEN (Redial/CID) R If there is a missed call, Missed call is displayed. To display the redial list, press MEN (Redial/CID) again. 2 MbN: Select the desired entry. a MMENUN 3 MbN: Save a MSELECTN 4 To store the name, continue from step 3, Editing entries, page 21. Storing caller information to the phonebook 1 MEN (Redial/CID) R If the redial list is displayed, press MEN

(Redial/CID) again to switch to the caller list. 2 MbN: Select the desired entry. a MMENUN R To edit the number: MbN: Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format. a MSAVEN a MbN:

Phonebook a MSELECTN a Go to step 4. 3 MbN: Save phonebook a MSELECTN 4 Continue from step 3, Editing entries, page 21. Groups Groups can help you find entries in the phonebook quickly and easily. You can change the names of groups assigned for phonebook entries (Friends, Family, etc.). By assigning different ringer tones for different groups of callers, you can identify who is calling (ringer ID), if you have subscribed to Caller ID service. 20 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 20 2015/10/06 19:23:56 Changing group names/setting ringer ID The default group name is Group 1 to Group 9. 1 MFN W a MMENUN 2 MbN: Group a MSELECTN 3 MbN: Select the desired group. a 4 To change group names MSELECTN MbN: Group name a MSELECTN a Edit the name (10 characters max.). a MSAVEN To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN:

Select the desired ringer tone. a MSAVEN 5 MOFFN Phonebook 5 MbN: Select the desired group (page 20). a MSELECTN 2 times a MOFFN Erasing entries Erasing an entry 1 Find the desired entry (page 21). 2 MMENUN a MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN Erasing all entries 1 MFN W a MMENUN 2 MbN: Erase all a MSELECTN 3 MbN: Yes a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN Finding and calling from a phonebook entry 1 MFN W 2 To scroll through all entries MbN: Select the desired entry. To search by first character To search by group Press the dial key (0 to 9, or #) which contains the character you are searching for (page 20). MbN: Scroll through the phonebook if necessary. MGROUPN MbN: Select the desired group. a MSELECTN MbN: Scroll through the phonebook if necessary.

/ZN 3 M Editing entries 1 Find the desired entry (page 21). 2 MMENUN a MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN Chain dial This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have stored in the phonebook, without having to dial manually. 1 During an outside call, press MFN W. 2 MbN: Select the desired entry. 3 Press MCALLN to dial the number. Note:

R When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press MDN (Pause) to add pauses after the number and PIN as necessary (page 14). R If you have rotary/pulse service, you need to press * (TONE) before pressing MFN W in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding *

(TONE) to the beginning of phone numbers you wish to chain dial (page 20). For assistance, please visit http://shop.panasonic.com/support 21 TGL43x(en)_1006_ve003.pdf 21 2015/10/06 19:23:56 Viewing an entry/Making a call 1 Press and hold the desired speed dial key 2 To make a call, press M

(1 to 9).

/ZN. Phonebook Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset. Adding phone numbers to speed dial keys n By entering phone numbers:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Manual a MSELECTN 3 Enter the partys name (16 characters 4 Enter the partys phone number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN n From the phonebook:

key (1 to 9). a MADDN 1 Press and hold the desired speed dial 2 MbN: Phonebook a MSELECTN 3 MbN: Select the desired entry. a MSAVEN a MOFFN Note:

R If you edit a phonebook entry which is assigned to a speed dial key, the edited entry does not transfer to the speed dial key.

(1 to 9). a MMENUN Editing an entry 1 Press and hold the desired speed dial key 2 MbN: Edit a MSELECTN 3 Edit the name if necessary. a MOKN 4 Edit the phone number if necessary. a MOKN a MSELECTN a MOFFN

(1 to 9). a MMENUN Erasing an entry 1 Press and hold the desired speed dial key 2 MbN: Erase a MSELECTN 3 MbN: Yes a MSELECTN a MOFFN 22 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 22 2015/10/06 19:23:56 Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 Press MCN or MDN to select the desired main menu. a MSELECTN 3 Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN 4 Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note:

R To exit the operation, press MOFFN. R In the following table, < > indicates the default settings. R In the following table, R Display menu order and sub-menu may vary depending on your model. indicates the reference page number. Display menu tree and direct command code table Main menu: W Phonebook Operation Viewing the phonebook entry. Caller list Main menu:

Operation Viewing the caller list. Answering device Sub-menu 2 Main menu:

Sub-menu 1 Play new message Play all message Erase all message*1 Greeting Record greeting*1 Check greeting Pre-recorded*1

(Reset to pre-recorded greeting) Settings Code

#280 Code

#213 Code

#323

#324

#325

#302

#303

#304 21 33 36 36 37 35 36 35 For assistance, please visit http://shop.panasonic.com/support 23 TGL43x(en)_1006_ve003.pdf 23 2015/10/06 19:23:56 Programming Sub-menu 1 New message alert*1 Sub-menu 2 Outgoing call On/Off Outgoing call Notification to Outgoing call Remote code Base unit beep Settings Ring count*1 Recording time*1 Remote code*1 Screen call Voicemail access Answer on*1 Answer off*1 Main menu:

Operation Listening to voicemail messages. Intercom Main menu:

Operation Paging the desired unit. Set date & time Sub-menu 2 Main menu:

Sub-menu 1 Date and time*1 Memo alarm Alarm1-3 Time adjustment*1, *3 Settings On

<Off>

Activate

<Inactivate>

On

<Off>

Toll saver 2-7 rings

<4 rings>

<3 min>

1 min Greeting only*2

<111>

<On>Off Settings

<Off>

Once Daily Weekly

<Caller ID auto>

Manual Code

#338

#339

#211

#305

#306

#310

#327

#328 Code

#330 Code

#274 Code

#101

#720 37 37 40 40 39 40 35 35 41 17 13 29

#226 24 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 24 2015/10/06 19:23:56 Speed dial Main menu:

Operation Viewing the speed dial entry. Settings Main menu:

Sub-menu 1 Ring adjustments Sub-menu 2 Ringer volume

(Incoming) Intercom ringer volume

(Handset) Ringer tone

(Incoming)*4, *5

(Handset) Intercom ringer tone*4, *5

(Handset) Silent mode On/Off Silent mode Start/End Silent mode Select group Date and time*1 Memo alarm Alarm1-3 Time adjustment*1, *3 Set date & time Talking caller ID Handset Base unit*1 Programming Code

#261 Code

#160

#175

#161

#163

#238

#237

#241

#101

#720

#226

#162

#G162 22 29 30 30 13 29 33 Settings Off6 <6>

16 <6>

<Tone 1>

<Tone 3>

On

<Off>

<11:00 PM/

06:00 AM>

Group 1 - 9

<Off>

Once Daily Weekly

<Caller ID auto>

Manual

<On>Off On

<Off>

For assistance, please visit http://shop.panasonic.com/support 25 TGL43x(en)_1006_ve003.pdf 25 2015/10/06 19:23:56 Programming Sub-menu 1 Key detector setting*6 1:Add new device (for Detector1)*7 2:Add new device (for Detector2) 3:Add new device (for Detector3) 4:Add new device (for Detector4) Call block*1 Speed dial Record greeting*1 Voicemail LCD contrast

(Display contrast) Handset name Display name Redial mode Auto intercom Key tone Sub-menu 2 Change name*1 Registration Deregistration Block a single number Block range of numbers Block unknown CID

(CID: Caller ID) One ring for blocked call Save VM access#*1

(VM: Voicemail) VM tone detect*1 Settings Detector1 Detector2*8 Detector3*8 Detector4*8 Block

<Unblock>

<Yes>

No

<On>

Off Level 14 <2>

On

<Off>

<Most dialed>

Recent dialed On

<Off>

<On>Off Code

#6561

#6562*8

#6563*8

#6564*8

#6571

#6572*8

#6573*8

#6574*8

#6581

#6582*8

#6583*8

#6584*8

#217

#240

#173

#261

#302

#331

#332

#145

#104

#105

#659

#273

#165 18 19 19 19 22 35 41 41 32 32 14 17 26 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 26 2015/10/06 19:23:56 Sub-menu 1 Caller ID edit

(Caller ID number auto edit) Auto talk*9 Set tel line Sub-menu 2 Set dial mode*1 Set flash time*1, *10 Call sharing*1 Registration Change language Set line mode*1, *11 Register handset Deregistration*2 Display Announcement*1 Customer support Main menu:

Operation Displaying customer support Web address. Baby monitor Main menu:

Sub-menu 1 On/Off Sensitivity level Sub-menu 2 Programming Code

#214

#200

#120

#121

#122

#194

#130

#131

#110

#112 Code

#680 Code

#268

#269 34 15 13 15 16 32 32 12 13 30 31 Settings

<On>

Off On

<Off>

<Tone>

Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms

<700 ms>

900 ms A <B>

<On>

Off

<English>

Espaol

<English>

Espaol Settings On

<Off>

Low

<Middle>

High For assistance, please visit http://shop.panasonic.com/support 27 TGL43x(en)_1006_ve003.pdf 27 2015/10/06 19:23:57 Programming Key detector*6 Main menu:

Sub-menu 1 Search Battery check

*1 If you program these settings using one of the units, you do not need to program the same Sub-menu 2 Code

#655 Settings

*2 This menu is not displayed when scrolling through the display menus. It is only available in item using another unit. direct command code.

*3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select Caller ID auto. To turn this feature off, select Manual. (Caller ID subscribers only) To use this feature, set the date and time first (page 13).

*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 2). If you select a melody, you cannot distinguish lines by their ringers.

*5 The preset melodies in this product are used with permission of 2009 Copyrights Vision manual for more information on the key detector.

*6 This setting is available when you have the key detector (KX-TGA20). Read the installation

*7 For models with supplied key detectors, the display shows 1: Detector1.

*8 If you register 2 or more key detectors.

*9 If you subscribe to a Caller ID service and want to view the callers information after lifting up

*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX the handset to answer a call, turn off this feature. supplier if necessary. The setting should stay at 700 ms unless pressing MFLASHN fails to pick up the waiting call.

*11 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to A if telephone line condition is not good. Inc. 28 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 28 2015/10/06 19:23:57 Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals

(snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important:

R Make sure the units date and time setting is correct (page 13). 1 MMENUN#720 2 MbN: Select the desired alarm. a 3 MbN: Select the desired alarm option. a MSELECTN MSELECTN Off Turns alarm off. Go to step 10. Once An alarm sounds once at the set time. Daily An alarm sounds daily at the set time. Go to step 5. Weekly Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. n Once:

Enter the desired month and date. a MOKN n Weekly:

MbN: Select the desired day of the week and press MSELECTN. a MOKN 5 Set the desired time. 6 *: Select AM or PM. a MOKN 7 Enter a text memo (10 characters max.). a MOKN Programming 8 MbN: Select the desired alarm tone. a MSELECTN R We recommend selecting a different ringer tone from the one used for outside calls. a MSAVEN 9 MbN: Select the desired snooze setting. 10 MSELECTN a MOFFN Note:

R Press MSTOPN to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZEN to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebooks group feature

(page 20), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important:

R Make sure the units date and time setting is correct (page 13). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off 1 MMENUN#238 2 MbN: Select the desired setting. a MSAVEN R If you select Off, press MOFFN to exit. For assistance, please visit http://shop.panasonic.com/support 29 TGL43x(en)_1006_ve003.pdf 29 2015/10/06 19:23:57 wish to start this feature. Programming 3 Enter the desired hour and minute you 4 *: Select AM or PM. a MOKN 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select AM or PM. 7 MSAVEN a MOFFN Changing the start and end time 1 MMENUN#237 2 Continue from step 3, Turning silent mode on/off, page 29. Selecting groups to bypass silent mode 1 MMENUN#241 2 MbN: Select your desired groups. a MSELECTN R group numbers. is displayed next to the selected R To cancel the selected group:

MbN: Select the group. a Press MSELECTN again. disappears. 3 MSAVEN a MOFFN Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or even while away from home. The monitored handset (placed in a babys room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound. Important:

R Before using this feature, we recommend that you test this feature and adjust the baby monitor sensitivity as needed, especially if you plan to monitor from outside. R This feature should not be used as a substitute for a medical or caregivers supervision. It is the caregivers responsibility to stay close enough to handle any eventuality. Note:

R If the unit is connected to a PBX system, you cannot set the baby monitor. R During the monitoring mode, battery consumption is faster than usual. We recommend leaving the monitored handset on the base unit or charger. R The monitored handset never rings while it is being monitored. If the base unit is placed near the monitored handset, we recommend turning off the base unit ringer volume (page 25). Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a babys room). To monitor with a unit The internal baby monitor feature is available between handsets. 1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select the desired units number to monitor with. a MSAVEN R Baby monitor will be displayed. R The registered units name/number is displayed. Note:

R When this feature is on, another handset can hear the monitored handset by making an intercom call. To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. n From the phonebook:

1 MMENUN#268 2 MbN: On a MSELECTN 30 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 30 2015/10/06 19:23:57 3 MbN: Select Outgoing call to monitor from outside. a MADDN 4 MbN: Phonebook a MSELECTN 5 MbN: Select the phonebook entry. a MSAVEN R Baby monitor will be displayed. Note:

R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers:

1 MMENUN#268 2 MbN: On a MSELECTN 3 MbN: Select Outgoing call to monitor from outside. a MADDN 4 MbN: Manual a MSELECTN 5 Enter the desired name. a MOKN 6 Enter the desired number. a MOKN a MSELECTN R Baby monitor will be displayed. Note:

R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to On. 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: Off a MSELECTN a MOFFN monitored. monitored. Editing an outside monitoring number 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: On a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: Edit a MSELECTN 6 Edit the name if necessary. a MOKN 7 Edit the phone number if necessary. a MOKN a MSELECTN Programming monitored. Erasing an outside monitoring number 1 Press MMENUN on the handset being 2 MbN: On/Off a MSELECTN 3 MbN: On a MSELECTN 4 MbN: Select the outside line. 5 MMENUN a MbN: Erase a MSELECTN 6 MbN: Yes a MSELECTN a MOFFN Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. monitored. 1 Press MMENUN on the handset being 2 MbN: Sensitivity level a 3 MbN: Select the desired setting. a MSELECTN MSAVEN a MOFFN Answering the baby monitor n When monitoring with a handset:

/ZN to answer a call. Press M If you want to respond from the monitoring unit, press MDN (Mute). R The monitoring unit will answer calls automatically when the auto intercom feature is set to On (page 17). Note:

R If you receive an outside call when communicating with the monitored handset, the interrupt tone sounds. To answer the call, press MOFFN, then press M

/ZN. n When monitoring from outside:

Answer the call. If you want to respond from your monitoring phone, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. For assistance, please visit http://shop.panasonic.com/support 31 TGL43x(en)_1006_ve003.pdf 31 2015/10/06 19:23:57 Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset:

2 Base unit:

Press and hold MLOCATORN for about 5 seconds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. MMENUN#130 3 Handset:

Press MOKN, then wait until a long beep sounds. Deregistering a handset A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system. 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to 3 MbN: Yes a MSELECTN a MOFFN cancel. a MSELECTN Programming Note:

R The unit disconnects the call automatically after 2 minutes. Other programming Changing the handset name The default handset name is Handset 1 to Handset 6. You can customize the name of each handset (Bob, Kitchen, etc.). This is useful when you make intercom calls between handsets. To display the handset name in standby mode, turn on the handset name display feature (page 32). 1 MMENUN#104 2 Enter the desired name (10 characters max.). a MSAVEN a MOFFN Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is Off. 1 MMENUN#105 2 MbN: Select the desired setting. a MSAVEN a MOFFN Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important:

R See page 4 for information on the available model. 32 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 32 2015/10/06 19:23:57 Using Caller ID service Important:

R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest. R If the unit cannot receive caller information, the following is displayed:

Out of area: The caller dials from an area which does not provide a Caller ID service. Private caller: The caller requests not to send caller information. Long distance: The caller makes a long distance call. R If the unit is connected to a PBX system, caller information may not be properly received. Contact your PBX supplier. Missed calls If a call is not answered, the unit treats it as a missed call. The display shows Missed call. Note:

R Even when there are unviewed missed calls, Missed call disappears from the standby display if the following operation is performed by one of the units:

A handset is replaced on the base unit or charger. Pressing MOFFN on a handset. Phonebook name display When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is displayed and logged in the caller list. Caller ID Service Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must:

subscribe to a Caller ID service of your phone service provider. turn this feature on (page 25). When caller information is received, the handsets and/or base unit announce the callers name or phone number received from your phone service provider following every ring. R Name pronunciation may vary. This feature may not pronounce all names correctly. R Caller ID service has a limit of how many characters can be displayed. If the callers name is too long, the unit may not be able to display or announce the entire name. Phonebook name announcement When caller information is received and it matches a phone number stored in the phonebook, the stored name in the phonebook is announced. Caller list Important:

R Make sure the units date and time setting is correct (page 13). Viewing the caller list and calling back 1 MEN (Redial/CID) R If the redial list is displayed, press MEN

(Redial/CID) again to switch to the caller list. 2 Press MCN to search from the most recent call, or MDN to search from the oldest call. 3 To call back, press M To exit, press MOFFN.

/ZN. For assistance, please visit http://shop.panasonic.com/support 33 TGL43x(en)_1006_ve003.pdf 33 2015/10/06 19:23:57 Caller ID Service Note:

R If the entry has already been viewed or answered, is displayed. Editing a callers phone number You can edit a phone number in the caller list by removing its area code and/or the long distance code 1. 1 MEN (Redial/CID) R If the redial list is displayed, press MEN

(Redial/CID) again to switch to the caller list. 2 MbN: Select the desired entry. a MMENUN 3 MbN: Edit a MSELECTN 4 Press MEDITN repeatedly until the phone number is shown in the desired format. 5 M

/ZN Erasing selected caller information 1 MEN (Redial/CID) R If the redial list is displayed, press MEN

(Redial/CID) again to switch to the caller list. 2 MbN: Select the desired entry. 3 MERASEN a MbN: Yes a MSELECTN a MOFFN Erasing all caller information 1 MEN (Redial/CID) R If the redial list is displayed, press MEN

(Redial/CID) again to switch to the caller list. 2 MERASEN a MbN: Yes a MSELECTN a MOFFN Caller ID number auto edit feature Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows:

When the call is being received, the Caller ID number is displayed in the same format as the edited number. After the call has ended, the callers phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that callers area code are edited automatically. This feature can be set for each unit

(page 27). The default setting is On. Note:

R Phone numbers from the 4 most recently edited area codes are automatically edited. 34 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 34 2015/10/06 19:23:57 Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting Greeting only as the recording time setting (page 40). Important:

R Make sure the units date and time setting is correct (page 13). Memory capacity (including your greeting message) The total recording capacity is about 17 minutes. A maximum of 64 messages can be recorded. Note:

R When message memory becomes full:

Messages full is shown on the handset display. The ANSWER ON/OFF indicator (

on the base unit flashes rapidly if the answering system is turned on. If you use the pre-recorded greeting

) message, the unit automatically switches to another pre-recorded greeting message asking callers to call again later. If you recorded your own greeting message, the same message is still announced to callers even though their messages are not recorded. Turning the answering system on/off Base unit Press MANSWER ON/OFFN to turn on/off the answering system. Handset 1 To turn on:

MMENUN#327 Answering System To turn off:

MMENUN#328 2 MOFFN Note for base unit and handset:

R When the answering system is turned on,

) on the ANSWER ON/OFF indicator (

the base unit lights up. Greeting message When the unit answers a call, a greeting message is played to callers. You can use either:

your own greeting message a pre-recorded greeting message Recording your greeting message 1 MMENUN#302 2 MbN: Yes a MSELECTN 3 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.). 4 Press MSTOPN to stop recording. a MOFFN Using a pre-recorded greeting message The unit provides 2 pre-recorded greeting messages:

If you reset to pre-recorded greeting or do not record your own greeting message, the unit plays a pre-recorded greeting asking callers to leave a message. is set to Greeting only, callers messages are not recorded and the unit plays a different pre-recorded greeting message asking callers to call again. If the message recording time (page 40) Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. For assistance, please visit http://shop.panasonic.com/support 35 TGL43x(en)_1006_ve003.pdf 35 2015/10/06 19:23:57 Answering System 1 MMENUN#304 2 MYESN a MOFFN Playing back the greeting message 1 MMENUN#303 2 To exit, press MOFFN. Listening to messages Important:

R If your phone service provider offers voicemail service, the voicemail service may answer calls before the base units built-in answering system has a chance to answer calls and record messages. In this case, messages you expect to be recorded by the answering system will be recorded on the voicemail service. For more information, see For landline voicemail service subscribers (page 40). R When using the base unit or handset to listen to messages, the noise reduction feature (page 16) is activated automatically in spite of the setting (

displayed). is not Using the base unit When new messages have been recorded, M N (PLAY). Press M R During playback, M N on the base unit flashes. N on the base unit lights. R If new messages have been recorded, the base unit plays back new messages. R If there are no new messages, the base unit plays back all messages. Operating the answering system during playback Key MjN or MkN Operation Adjust the speaker volume Key M N N N (STOP) M M MERASEN Operation Repeat message*1 Skip message Stop playback Erase currently playing message

*1 If pressed within the first 5 seconds of a message, the previous message is played. Erasing all messages Press MERASEN 2 times while the unit is not in use. Using the handset When new messages have been recorded, New message is displayed. 1 To listen to new messages:

MMENUN#323 To listen to all messages:

MMENUN#324 2 When finished, press MOFFN. Note:

/ZN. R To switch to the receiver, press M R You can also use the MPLAYN soft key, if displayed, to play new messages. Operating the answering system MMENUN a MbN: Answering device a MSELECTN Key MjN or MkN Adjust the receiver/speaker Operation 1 or MFN 2 or MEN 3 4 5 6 volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Enter the Settings menu Play new messages Play all messages Play greeting message 36 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 36 2015/10/06 19:23:57 Key 76 8 MPAUSEN 9 or MSTOPN 0

*4*3

*5

*6 Operation Record greeting message Turn answering system on Pause message*2 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages Reset to a pre-recorded greeting message

*1 If pressed within the first 5 seconds of a

*2 To resume playback:

message, the previous message is played. MbN: Playback a MSELECTN

*3 You can also erase as follows:

MPAUSEN a MbN: Erase a MSELECTN a MbN: Yes a MSELECTN Calling back (Caller ID subscribers only) 1 Press MPAUSEN during playback. 2 MbN: Call back a MSELECTN Editing the number before calling back 1 Press MPAUSEN during playback. 2 MbN: Edit & Call a MSELECTN 3 Press MEDITN repeatedly until the phone number is shown in the desired format

(page 34). a M

/ZN Erasing all messages 1 MMENUN#325 2 MbN: Yes a MSELECTN a MOFFN Answering System Advanced new message alerting features Audible message alert This feature allows the base unit to beep to inform you of a new message arrival when new messages are recorded. The base unit beeps 2 times every minute until you listen to the messages, if the Base unit beep setting is turned on. The default setting is Off. 1 MMENUN#339 2 MbN: Select the desired setting. a MSAVEN a MOFFN New message alert by a call This feature allows you to receive a notification by phone when new messages are recorded. The base unit calls a phone number you specify. You can then operate the answering system remotely to listen to the new message. To use this feature, you must:

store a phone number to which the unit makes the call to. turn on the new message alert setting. After you answer the new message alert call, you can listen to messages from that call

(page 38). Important:

R A new message alert is stopped 1 minute after the unit starts to call. The unit will not retry the call even if the call is not answered. Storing a phone number to which the unit makes an alert call n From the phonebook:

1 MMENUN#338 2 MbN: Notification to a 3 MbN: Phonebook a MSELECTN 4 MbN: Select the desired phonebook MSELECTN a MADDN entry. a MSAVEN a MOFFN For assistance, please visit http://shop.panasonic.com/support 37 TGL43x(en)_1006_ve003.pdf 37 2015/10/06 19:23:57 Answering System n By entering a phone number:

MSELECTN a MADDN 1 MMENUN#338 2 MbN: Notification to a 3 MbN: Manual a MSELECTN 4 Enter the desired name (16 characters 5 Enter the desired number (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN Turning on/off the new message alert setting 1 MMENUN#338 2 MbN: On/Off a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Editing the set phone number 1 MMENUN#338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Edit a MSELECTN 4 Edit the name if necessary (16 characters 5 Edit the phone number if necessary (24 digits max.). a MOKN a MSELECTN a MOFFN max.). a MOKN Erasing the set phone number 1 MMENUN#338 2 MbN: Notification to a MSELECTN 3 MMENUN a MbN: Erase a MSELECTN 4 MbN: Yes a MSELECTN a MOFFN R The new message alert setting is turned off. Activating/inactivating the remote access code to play messages If you activate this feature, you must enter the remote access code (page 39) to play the new message from the new message alert call. This is so that unauthorized parties cannot listen to your messages. The default setting is Inactivate. Inactivate: You can listen to the message by pressing 4 to play new messages (without entering the remote access code). Activate: You must enter your remote access code and then press 4 to play new message. 1 MMENUN#338 2 MbN: Remote code a MSELECTN 3 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to messages After you answer the new message alert, you can listen to the messages as follows. n When the remote access code is set to n When the remote access code is set to Inactivate:

Press 4 to play the new message during the announcement. Activate:

1 Enter the remote access code

(page 39) during the announcement. 2 Press 4 to play the new message. Note:

R Within 10 seconds after listening to new messages, you can press #9 during the call to turn off the new message alert by a call feature. R Even if the unit makes a new message alert call, the handset redial list does not show the record. Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The units voice guidance prompts you to press certain dial keys to perform different operations. 38 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 38 2015/10/06 19:23:57 Remote access code A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents unauthorized parties from listening to your messages remotely. The default setting is 111. Important:

R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. 1 MMENUN#306 2 Enter the desired 3-digit remote access code. a MSAVEN a MOFFN Deactivating remote operation Press * in step 2 on Remote access code, page 39. R The entered remote access code is deleted. Using the answering system remotely 1 Dial your phone number from a 2 After the greeting message starts, enter 3 Follow the voice guidance prompts as your remote access code. touch-tone phone. necessary or control the unit using remote commands (page 39). 4 When finished, hang up. Voice guidance n When the English voice guidance is selected During remote operation, the units voice guidance starts and prompts you to press 1 to perform a specific operation, or press 2 to listen to more available operations. n When the Spanish voice guidance is selected To start the voice guidance, press 9. The voice guidance announces the available remote commands (page 39). Answering System Note:

R If you do not press any dial keys within 10 seconds after a voice guidance prompt, the unit disconnects your call. Remote commands You can press dial keys to access certain answering system functions without waiting for the voice guidance to prompt you. Key 1 2 4 5 9 Operation Repeat message (during playback)*1 Skip message (during playback) Play new messages Play all messages Stop playback*2 Start voice guidance*3 Turn answering system off 0

*4 Erase currently playing message

*5 Erase all messages

*# End remote operation

(or hang up)

*1 If pressed within the first 5 seconds of a message, the previous message is played.

*2 For English voice guidance only

*3 For Spanish voice guidance only touch-tone phone. Turning on the answering system remotely 1 Dial your phone number from a 2 Let the phone ring 15 times. 3 Enter your remote access code within 10 seconds after the long beep. R The greeting message is played back. R You can either hang up, or enter your remote access code again and begin remote operation (page 38). R A long beep is heard. For assistance, please visit http://shop.panasonic.com/support 39 TGL43x(en)_1006_ve003.pdf 39 2015/10/06 19:23:57 Answering System Answering system settings Call screening While a caller is leaving a message, you can listen to the call through the units speaker. To adjust the speaker volume, press MjN or MkN repeatedly. You can answer the call by pressing M on the handset. Call screening can be set for each handset. The default setting is On. 1 MMENUN#310 2 MbN: Select the desired setting. a

/ZN MSAVEN a MOFFN Number of rings before the unit answers a call You can change the number of times the phone rings Ring count before the unit answers calls. You can select 2 to 7 rings, or Toll saver. The default setting is 4 rings. Toll saver: The units answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 39), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call. 1 MMENUN#211 2 MbN: Select the desired setting. a MSAVEN a MOFFN For landline voicemail service subscribers If you subscribe to a flat-rate service package that includes Caller ID, call waiting, voicemail, and unlimited local/regional/long distance calls, please note the following:

R To use the voicemail service provided by your phone service provider rather than the units answering system, turn off the answering system (page 35). R To use this units answering system rather than the voicemail service provided by your phone service provider, please contact your phone service provider to deactivate your voicemail service. If your phone service provider cannot do this:

Set this units Ring count setting so that this units answering system answers calls before the voicemail service of your phone service provider does. It is necessary to check the number of rings required to activate the voicemail service provided by your phone service provider before changing this setting. Change the number of rings of the voicemail service so that the answering system can answer the call first. To do so, contact your phone service provider. Callers recording time You can change the maximum message recording time allowed for each caller. The default setting is 3 min. 1 MMENUN#305 2 MbN: Select the desired setting. a MSAVEN a MOFFN Selecting Greeting only You can select Greeting only which sets the unit to announce a greeting message to callers but not record messages. Select Greeting only in step 2 on Callers recording time, page 40. Note:

R When you select Greeting only:

the unit will play the pre-recorded greeting-only message asking callers to call again later. If you do not record your own message, If you use your own message, record the greeting-only message asking callers to call again later (page 35). 40 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 40 2015/10/06 19:23:57 Voicemail service Voicemail is an automatic answering service offered by your phone service provider. After you subscribe to this service, your phone service providers voicemail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your phone service provider, not your telephone. Please contact your phone service provider for details of this service. Important:

R To use the voicemail service provided by your phone service provider rather than the units answering system, turn off the answering system (page 35). For details, see page 40. Storing the voicemail (VM) access number In order to listen to your voicemail messages, you must dial your phone service providers voicemail access number. Once you have stored your voicemail access number, you can dial it automatically (page 41). 1 MMENUN#331 2 Enter your access number (24 digits max.). a MSAVEN a MOFFN Note:

R When storing your voicemail access number and your mailbox password, press MDN (Pause) to add pauses (page 14) between the access number and the password as necessary. Contact your phone service provider for the required pause time. Example:

Useful Information To erase the voicemail access number 1 MMENUN#331 2 Press and hold MCLEARN until all digits are erased. a MSAVEN a MOFFN Voicemail (VM) tone detection Your phone service provider sends special signals (sometimes called voicemail tones or stutter tones) to the unit to let you know you have new voicemail messages. If you hear a series of dial tones followed by a continuous

/ZN, you have dial tone after you press M new voicemail messages. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voicemail messages have been recorded. Turn this feature off when:

You do not subscribe to voicemail service. Your phone service provider does not send voicemail tones. Your phone is connected to a PBX. If you are not sure which setting is required, contact your phone service provider. Turning VM tone detection on/off The default setting is On. 1 MMENUN#332 2 MbN: Select the desired setting. a MSAVEN a MOFFN Listening to voicemail messages When new messages have been recorded, Voicemail msg. via phone co. is displayed if message indication service is available. 1 MMENUN#330 2 Follow the pre-recorded instructions. 3 When finished, hang up. Note:

R You can also use the MACCESSN soft key, R The speakerphone turns on. if displayed, to play new voicemail messages. For assistance, please visit http://shop.panasonic.com/support 41 TGL43x(en)_1006_ve003.pdf 41 2015/10/06 19:23:57 1-222-333-4444VM access numberPausesPasswordPPPP8888 2 Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the AC adaptor cord and telephone line cord

(B). AC adaptor cord Useful Information R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Wall mounting Note:

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit. Base unit 1 Lead the AC adaptor cord and telephone line cord through the hole in the wall mounting adaptor in the direction of the arrow. 3 Insert the hooks on the wall mounting

) on the

) and (

adaptor into holes (

base unit. 42 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 42 2015/10/06 19:23:57 1AB1121212 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. Fit the slots of the unit onto the corresponding wall phone plate tabs for (

) respectively.

) and (

Useful Information 5 Mount the unit on a wall then slide down to secure in place. AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 83 mm (3 1/4 inches) 102 mm (4 inches) To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). For assistance, please visit http://shop.panasonic.com/support 43 TGL43x(en)_1006_ve003.pdf 43 2015/10/06 19:23:57 123451542345BAA Useful Information Charger Drive the screws (

wall. 27.2 mm (1 1/16 inches)

) (not supplied) into the 44 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 44 2015/10/06 19:23:57 1212 Error messages Display message Ask phone company for VM access #

Base no power orNo link. Re-

connect base AC adaptor. Busy Check tel line Error!!

Invalid Requires subscription to Caller ID. Use rechargeable battery. Useful Information Cause/solution R You have not stored the voicemail access number. Store the number (page 41). R Confirm the base units AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handsets registration may have been canceled. Re-register the handset (page 32). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again. R The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 9). R Recording was too short. Try again. R There is no handset registered to the base unit matching the handset number you entered. R The handset is not registered to the base unit. Register the handset (page 32). R You must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed. R A wrong type of battery such as alkaline or manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 4, 6. For assistance, please visit http://shop.panasonic.com/support 45 TGL43x(en)_1006_ve003.pdf 45 2015/10/06 19:23:58 Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the base units AC adaptor, then reconnect the base units AC adaptor. Remove the batteries from the handset, and then insert them into the handset again. General use Problem The handset does not turn on even after installing charged batteries. The unit does not work. I cannot hear a dial tone. Cause/solution R Place the handset on the base unit or charger to turn on the handset. R Make sure the batteries are installed correctly (page 9). R Fully charge the batteries (page 10). R Check the connections (page 9). R Unplug the base units AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset has not been registered to the base unit. Register the handset (page 32). R The base units AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. The base unit beeps. R New messages have been recorded. Listen to the new messages (page 36). Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Battery recharge Problem The handset beeps and/or flashes. Cause/solution R Change the display language (page 12). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 32). Cause/solution R Battery charge is low. Fully charge the batteries (page 10). 46 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 46 2015/10/06 19:23:58 Useful Information Cause/solution R Clean the battery ends (

,

) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 9). Problem I fully charged the batteries, but the operating time seems to still flashes, is displayed, or be shorter. Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. I cannot make a call. I cannot make long distance calls. Caller ID/Talking Caller ID Problem Caller information is not displayed. Cause/solution R The handset is too far from the base unit. Move closer. R The base units AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it

(page 32). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume is turned off. Adjust the ringer volume

(page 15, 25). R Silent mode is turned on. Turn it off (page 29). R The dialing mode may be set incorrectly. Change the setting (page 13). R Make sure that you have long distance service. Cause/solution R You must subscribe to Caller ID service. Contact your phone service provider for details. R If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The name display service may not be available in some areas. Contact your phone service provider for details. R Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. For assistance, please visit http://shop.panasonic.com/support 47 TGL43x(en)_1006_ve003.pdf 47 2015/10/06 19:23:58 Useful Information Problem Caller information is displayed or announced late. Caller information is not announced. The caller list/incoming phone numbers are not edited automatically. I cannot dial the phone number edited in the caller list. Time on the unit has shifted. The 2nd callers information is not displayed during an outside call. Cause/solution R Depending on your phone service provider, the unit may display or announce the callers information at the 2nd ring or later. R Move closer to the base unit. R The handset or base units ringer volume is turned off. Adjust it (page 15, 25). R The Talking Caller ID feature is turned off. Turn it on R The number of rings for the answering system is set to 2

(page 25). rings or Toll saver. Select a different setting

(page 40). R If the base unit and another handset are having an intercom call, your handset does not announce caller information. R The Caller ID number auto edit feature is turned off. Turn it on and try again (page 27). R You need to call back the edited number to activate Caller ID number auto edit. R The phone number you dialed might have been edited incorrectly (for example, the long distance 1 or the area code is missing). Edit the phone number with another pattern (page 34). changes the time. Set the time adjustment to Manual

(off) (page 25). R Incorrect time information from incoming Caller ID R In order to use Caller ID, call waiting, or Call Waiting Caller ID (CWID), you must first contact your phone service provider and subscribe to the desired service. After subscribing, you may need to contact your phone service provider again to activate this specific service, even if you already subscribed to both Caller ID and Call Waiting with Caller ID services (CWID). 48 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 48 2015/10/06 19:23:58 Answering system Problem The unit does not record new messages. I cannot operate the answering system remotely. The unit does not emit the specified number of rings. Voicemail Problem Voicemail msg. via phone co. is shown on the handset display. How do I remove this message from the display?

Useful Information messages (page 36, 37). Cause/solution R The answering system is turned off. Turn it on (page 35). R The message memory is full. Erase unnecessary R The recording time is set to Greeting only. Change R Your phone service providers voicemail service may be answering your calls before the units answering system can answer your calls. Change the units number of rings setting (page 40) to a lower value, or contact your phone service provider. the setting (page 40). R The answering system will not answer incoming calls while the other devices such as handsets are engaged in a call. R The remote access code is not set. Set the remote access code (page 39). R You are entering the wrong remote access code. If you have forgotten your remote access code, enter the remote access code setting to check your current code

(page 39). R The answering system is turned off. Turn it on (page 39). R If the ring once setting is turned off (page 19), the number of rings decreases by 1 from the specified number of rings. Cause/solution R This notification is displayed when your phone service providers voicemail service (not the units answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voicemail number provided by your phone service provider (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your phone service provider, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps. For assistance, please visit http://shop.panasonic.com/support 49 TGL43x(en)_1006_ve003.pdf 49 2015/10/06 19:23:58 Useful Information Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center. Caution:

R To avoid permanent damage, do not use a microwave oven to speed up the drying process. 50 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 50 2015/10/06 19:23:58 FCC and other information Useful Information For assistance, please visit http://shop.panasonic.com/support 51 TGL43x(en)_1006_ve003.pdf 51 2015/10/06 19:23:58 This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided to the telephone company.L Registration No.............(found on the bottom of the unit)L Ringer Equivalence No. (REN).......0.1BA plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with the product. It is designed to be connected to a compatible modular jack that is also compliant.The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for the product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will beadvised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Service Center or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid Useful Information 52 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 52 2015/10/06 19:23:58 manufacturer about the availability of HearingAids which provide adequate shielding to RF energy commonly emitted by digital devices.WHEN PROGRAMMING EMERGENCYNUMBERSAND(OR) MAKING TESTCALLSTO EMERGENCY NUMBERS:1) Remain on the line and briefly explain to the dispatcher the reason for the call.2) Perform such activities in the off-peakhours, such as early morning or late evenings.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Privacy of communications may not be ensured when using this phone.CAUTION:Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this device.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.Some cordless telephones operate at frequencies that may cause interference to nearbyTVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. Ifinterference is experienced, move the cordless telephone further away from the TVor VCR. This will often reduce or eliminate interference.FCC RF Exposure Warning:LThis product complies with FCC radiation exposure limits set forth for an uncontrolled environment. LTo comply with FCC RF exposure requirements, the base unit must be installed and operated 20 cm (8 inches) or more between the product and all persons body. LThis product may not be collocated or operated in conjunction with any other antenna or transmitter.L For body-worn operation, the handset must be used only with a non-metallic accessory. Use of other accessories may not ensure compliance with FCC RF exposure requirements.Notice:L FCC ID can be found inside the battery compartment or on the bottom of the units. Useful Information For assistance, please visit http://shop.panasonic.com/support 53 TGL43x(en)_1006_ve003.pdf 53 2015/10/06 19:23:58 Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants.TCompatible withHearing Aid T-CoilTIA-1083 Gua Rpida Espaola Gua Rpida Espaola 54 Para obtener ayuda, visite http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 54 2015/10/06 19:23:58 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support 55 TGL43x(en)_1006_ve003.pdf 55 2015/10/06 19:23:58 Gua Rpida Espaola 56 Para obtener ayuda, visite http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 56 2015/10/06 19:23:58 Gua Rpida Espaola Para obtener ayuda, visite http://shop.panasonic.com/support 57 TGL43x(en)_1006_ve003.pdf 57 2015/10/06 19:23:58 Gua Rpida Espaola 58 Para obtener ayuda, visite http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 58 2015/10/06 19:23:58 Customer services Appendix For assistance, please visit http://shop.panasonic.com/support 59 TGL43x(en)_1006_ve003.pdf 59 2015/10/06 19:23:58 Accessories!hp://shop.panasonic.com/supportCustomer Services DirectoryShopfor all your Panasonic gearGo to Get everything you need to get the most out ofyour Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & moreFor Product Informaon, Operang Assistance, Parts, Owners Manuals, Dealer and Service infogo to hp://shop.panasonic.com/supportFor the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 Appendix Limited Warranty (ONLY FOR U.S.A.) 60 For assistance, please visit http://shop.panasonic.com/support TGL43x(en)_1006_ve003.pdf 60 2015/10/06 19:23:58 Limited Warranty Coverage (For USA Only)LaborOne (1) YearPartsOne (1) YearTo submit a new repair request and for quick repair status visit our Web Site athttp://shop.panasonic.com/supportPanasonic Products Limited WarrantyOnline Repair RequestMail-In Service--Online Repair RequestIf your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (warranty period), at its option either (a) repair your product with new or refurbished parts,(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.During the Labor warranty period there will be no charge for labor. During the Parts warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States.This warranty is extended only to the original purchaser of a new product which was not sold as is.TelephoneWhen shipping the unit, carefully pack, include all supplied accessories listed in the Owners Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at http://shop.panasonic.com/support as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.Product or Part Name Appendix For assistance, please visit http://shop.panasonic.com/support 61 TGL43x(en)_1006_ve003.pdf 61 2015/10/06 19:23:58 Limited Warranty Limits and Exclusions(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY COVERAGE.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to: Consumer Affairs Department Panasonic Corporation of North America 661 Independence Pkwy Chesapeake, VA 23320As of June 2015 G Groups: 20 H Handset Deregistration: 32 Name: 32 Registration: 32 Hold: 15 Intercom: 17 I K Key detector: 26, 28 Key tone: 26 Line mode: 27 L M Making calls: 14 Missed calls: 33 Mute: 15 N Noise reduction: 16 P Pause: 14 Phonebook: 20 Power failure: 10 T S R Redialing: 14 Ringer ID: 21 Ringer tone: 25 Rotary/pulse service: 16 Silent mode: 29 Speed dial: 22 SP-PHONE (Speakerphone): 14 Talking Caller ID: 33 Temporary tone dialing: 16 Time adjustment: 25 Transferring calls: 16 Troubleshooting: 46 TTY: 59 VM (Voicemail): 41 Voice announcement language: 13 Voice paging: 17 Voicemail: 40, 41 Volume V Receiver: 14 Ringer (Base unit): 15 Ringer (Handset): 15, 25 Speaker: 14 W Wall mounting: 42 Index Index

#

3-way conference: 16 A Additional handset: 32 Alarm: 29 Answering calls: 15 Answering system Call screening: 40 Erasing messages: 36, 37, 39 Greeting message: 35 Greeting only: 40 Listening to messages: 36, 39 New message alerting: 37 Number of rings: 40 Recording time: 40 Remote access code: 39 Remote operation: 38 Ring count: 40 Toll saver: 40 Turning on/off: 35 Auto intercom: 17 Auto talk: 15, 27 B Baby monitor: 30 Battery: 9, 10 Booster (Clarity booster): 16 C Call block: 18 One ring for blocked call: 19 Call share: 16, 27 Call waiting: 15 Call Waiting Caller ID: 15 Caller ID number auto edit: 27, 34 Caller ID service: 33 Caller list: 33 Caller list edit: 34 Chain dial: 21 CID (Caller ID): 33 Conference calls: 16 Control type: 11 Customer support: 27 D Date and time: 13 Dialing mode: 13 Direct command code: 23 Display Contrast: 26 Language: 12 Eco mode: 10 Equalizer: 16 Error messages: 45 Flash: 15, 27 E F 62 TGL43x(en)_1006_ve003.pdf 62 2015/10/06 19:23:58 Notes 63 TGL43x(en)_1006_ve003.pdf 63 2015/10/06 19:23:58 For your future reference We recommend keeping a record of the following information to assist with any repair under warranty. Serial No.

(found on the bottom of the base unit) Name and address of dealer Date of purchase Attach your purchase receipt here. Panasonic System Networks Co., Ltd. 2015 Printed in Vietnam

*PNQX7766ZA*

*PNQX7766ZA*

PNQX7766ZA TT1115MG0 TGL43x(en)_1006_ve003.pdf 64 2015/10/06 19:23:58 1 Reconnect AC adaptor to the base unit.2 Check if telephone line cord is connected.3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)4 Read troubleshooting page in the Operating Instructions.Visit our Web site: http://shop.panasonic.com/supportLFAQ and troubleshooting hints are available.If your product is not working properly. IMPORTANT!Two Riverfront Plaza, Newark, NJ 07102-5490