submitted | available | document details (if available) | source link |
---|---|---|---|
August 09 2017 |
various | Installation Guide | Users Manual | 780.86 KiB | August 09 2017 |
PATSCAN CMR Technical Installation Guide v.1.03 - DRAFT 07/27/2017 2017 PatriotOne Technologies All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except for training purposes. PatriotOne Technologies Inc. Unit 302 3380 South Service Rd Burlington, Ontario L7N 3J5 Canada
+1 (888) 728-1832 info@patriot1tech.com Patriot One Technologies Inc. Confidential 1 Disclaimer Parts List Customer-Provided Parts Diagrams Procedures Planning Stage Hardware Installation 2 2 3 4 8 8 9 Patriot One Technologies Inc. Confidential 2 Disclaimer PATSCAN CMR is certified for use only when installed by trained professionals authorized by Patriot One Technologies. Parts List Name, Make, Model of Component / Part Short Description of Use 1 2 3 4 5 6 7 8 9 Transceiver, Copper Mountain, P148 RF transceiver AC Adapter, CUI INC, EMSA120125NEBA-P5P-SZ-C1 Provides 12VDC to the transceiver LNA, Mini-Circuits ZX60-83LN-S+
AC Adapter, Triad WSU060-1250-13 Boosts received signal to transceiver Provides DC to power to the LNA Mini PC, Zotac, ZBOX-CI325NANO Controller AC Adapter, Delta Electronics, ADP-40KD BB Provides DC to power to the Mini PC 2 x Antenna Module, Patriot One Tech, PAT-10005 TX and RX antenna with enclosure. Modules are identical and interchangeable. Coax RF, LMR240FR SMA male straight to SMA male straight cable 4, Assembled by Cablek Connect antenna module the transceiver port 1 Coax RF, LMR240FR SMA male straight to SMA male straight cable 4, Assembled by Cablek Connect antenna module the LNA input port 10 Adapter, AD-NMSMAM Adapter N-type Male to SMA Male Connect LNA output port to transceiver port 2 Patriot One Technologies Inc. Confidential 3 11 12 13 Adapter, AD-NMSMAF Adapter N-type Male to SMA Female Adapts transceiver port 1 to N to SMA Adapter, AD-SMAMSMAF-90 Adapter SMA Male to SMA Female 90 Right Angle Adapts antenna Module port 1 Adapter, AD-SMAMSMAF-90 Adapter SMA Male to SMA Female 90 Right Angle Adapts antenna Module port 2 14 Service box, Legrand On-Q EN2050 15 Power bar, Legrand On-Q, AC1031 16 USB cable Customer-Provided Parts The customer must provide:
Enclosure for transceiver, Mini PC and LNA. Power bar for items inside the service box Connects the transceiver to the Mini PC Network cable of sufficient length to connect Mini PC to network will be provided by customer. Access to a PC with [need specs]
Patriot One Technologies Inc. Confidential 4 Diagrams Figure 1: Service Box Interior Patriot One Technologies Inc. Confidential 5 Figure 2: System Exploded View Patriot One Technologies Inc. Confidential 6 Figure 3: Service Box--to-Antenna Module Connections Patriot One Technologies Inc. Confidential 7 Figure 4: Example Installation in Wall Figure 5: Antenna Module Mounting Patriot One Technologies Inc. Confidential 8 Figure 6: Service Box Cable Connections Procedures Planning Stage Determine where the system will be installed. The wall that will contain the antenna modules and service box needs to Patriot One Technologies Inc. Confidential 9 allow for no more than 4 feet between each antenna module and the service box. The antenna module and service box are sized to fit between wall studs. Hardware Installation 1. Open the shipping box and carefully remove the components Two Antenna Modules (part 7) One White Enclosure (part 14) Two SMA cables (parts 8 and 9) Install the two antenna modules within the wall 2. 3. Each module includes mounting plates with screw holes. See figure 5. Ensure antenna module with cable reaches service box connection. Install service box Follow Legrand EN2050 Installation Guide Install standard electrical outlet as per applicable codes. Shown in EN2050 Installation Guide 4. Connect SMA cables to outer edge of each antenna module as shown in figure 3. 5. Run the cables through the open port on the top of the service box. 6. Attach cable 1 to Port 1 shown in figure 6. 7. Attached cable 2 to Port 2 shown in figure 6. 8. Run ethernet cable from network into the enclosure through open port 9. Connect ethernet cable to the Ethernet port shown in figure 6 10. Plug in the power bar to the installed electrical connection 11. Turn on the power module 12. Verify the transceiver power switch is ON 13. Press power button on PC 14. Close the enclosure and lock it Patriot One Technologies Inc. Confidential 10
This product uses the FCC Data API but is not endorsed or certified by the FCC