IM30 POS Terminal UM Users Manual

P/N: 200312000000437 Compliance Statements PAX TECHNOLOGY LIMITED reserves the right to change product specifications without prior notification. FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) 2) this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

installed and used to radio or interference if not Manufacturer: PAX Computer Technology (Shenzhen) Co., Ltd. Address: 4FL, Building #3, Software Park, 2nd Central Science-

Tech RD, High-Tech Industrial Park, Shenzhen, Guangdong, PRC T: 0755-86169630 W: http://www.pax.com.cn Responsible Party: PAX Technology Inc. Address: 8880 Freedom Crossing Trail, Building 400, 3rd Floor, Suite 300, Jacksonville, Florida 32256 T: 1-877-859-0099 F: 0755-86169634 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Radiation Exposure This device complies with FCC radiation exposure limits for general environments. transmitter(s)/

licence-exempt INDUSTRY CANADA STATEMENT This device contains receiver(s) that comply with Innovation, Science and Economic Development Canadas RSS(s). Operation is subject to the conditions:

1) 2) this device must accept any interference, including interference that may cause undesired operation of the device. this device may not cause interference, and licence-exempt following two Quick Setup Guide IM30 POS TERMINAL Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Index of Icons 7 do not throw away, requires professional recycling Class II equipment for indoor use only VI energy efficiency marking (level VI)

~ AC voltage DC voltage licence conformes aux RSS Cet appareil contient des metteurs / rcepteurs exempts de

(RSS) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :

1) 2) l'utilisateur de l'appareil doit accepter tout brouillage le brouillage est l'appareil ne doit pas produire de brouillage, et radiolectrique subi, mme si susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The Country Code Selection feature products marketed in the US/Canada. La fonction de slection de lindicatif du pays est dsactive pour les produits commercialiss aux tats-

Unis et au Canada. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. is disabled for forth 7 8 9 10 Contents The following included with your POS terminal. If any items are missing, contact your dealer. items are Name IM30 POS terminal IM30 mounting bracket M4 nuts M4 screws IM30 Quick Setup Guide Product Description Quantity 1 1 4 4 1 7 8 2 1 4 3 5 6 9 10 11 12 13 14 Installation 1) SAM and SIM Cards Front Left Right Figure 4: SAM card mounts (main body) LCD touchscreen front facing camera 1. 2. 3. magnetic strip card reader 4. 5. 6. 7. 8. smart card reader code scanning camera camera locator light status indicator contactless card interface 2 8 1 4 3 7 5 6 Figure 2: Back view 1. 2. 3. 4. 5. 6. 7. RS232-A (device) RS232-B (host) auxiliary jack (mic + speaker) Ethernet port digitial I/O Executive/MDB port 3G/4G antenna (optional) SAM card module 8. USB Type A port (host) 9. 10. USB Type C port (OTG) 11. 12. 13. HDMI port 14. MDB port service button reset button Figure 1: Front view 1 2 Top Back Bottom Figure 3: View from all sides 3 Figure 5: SAM and SIM card mounts (SAM module) Unscrew the SAM card module and then remove it by prying at the notch set to its side. On the main body of the IM30, there are 2 micro-SIM sized SAM card slots. Open the mount and insert the card into the slot with the clipped corner of the card to the upper right, then lock the mount with the card inside. The SAM card module comes in 3 configurations, the first has no functional card slots, the second has a mini-SIM sized SIM card slot located to the left, and the last has an additional 2 mini-SIM sized SAM card slots to the right of the SIM card slot. Install the cards with the clipped corner facing inwards and to the right. 2) Clearance Holes and Dimensions 105.00 56.67 31.50 82.00

. 0 0 6 4 1

. 0 0 7 0 1 Figure 6: device dimensions (mm) 3) Recommended Device Installation IM30 M4 nuts M4 screws mounting bracket Figure 7: installation and mounting Instructions 1) Switching the device on and off Switch on:

Switch off:

Link the IM30 to a power source via the MDB, Executive, or RS232-A ports. Disconnect the terminal it is connected to. IM30 from the power 2) Environmental Conditions Storage Temperature:

Working Temperature:

Relative Humidity:

-30C~70C (-22F~158F)

-20C~70C (-4F~158F) 5%~95% (no condensation) Maintenance and Usage 5 1) If any cables become damaged, seek a replacement. 2) Do not insert unknown materials into any port on the IM30, this may cause serious damage to the device. If repairs are required, please contact a professional technician instead of attempting them on your own. The IM30 contains tamper-proofing features; these circuits will trigger if the device is disassembled, at which point it will have to be rearmed before the device is ready to resume operation. The IM30 is designed for outdoor use; however, during normal use its surface should still be keep clear of dirt and possible liquid contaminants. While the IM30 is designed to resist ingress of dust and liquids, it is not designed to resist pressurized liquids such as water hoses. Keep the back of the device away from dust and liquids as much as possible. 3) 4) 5) 6) 7) Make sure the various cables connect to provide the appropriate voltages at the proper pins. 4 5 6