| submitted | available | document details (if available) | source link |
|---|---|---|---|
| January 08 2018 |
| various | Users Manual | Users Manual | 1.17 MiB | / January 08 2018 |
Statement for User Manual Advanced Telecommunication Module (ATM-02) Roof & Trunk Version Rev. 1.3 Release peiker acustic confidential and proprietary Name of model:
Status:
Revision:
Date:
ATM-02 roof variant / ATM-02 trunk variant Release 1.3 13.02.2018 phG: Valeo Peiker Telematik GmbH, Vorsitzender der Geschftsfhrung: Fatma Montacer, Geschftsfhrer: Markus Skiba, Amtsgericht Coburg HRB 5735 peiker acustic GmbH, Max-Planck-Strae 28-32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRB 14055 Vorsitzender des Aufsichtsrates: Marc Vrecko Ein Unternehmen der Valeo Firmengruppe Table of Contents 1. Change Dokumentation ..................................................................................................................... 3 2. Introduction ....................................................................................................................................... 4 2.1. Scope ......................................................................................................................................... 4 2.1.1. Purpose of the document .................................................................................................... 4 2.1.2. General Information ............................................................................................................. 4 2.1.3. Contact Information ............................................................................................................. 4 3. Description of the product .................................................................................................................. 5 3.1 Use Cases of the product ........................................................................................................... 5 3.2 Roof and Trunk version of ATM-02 ............................................................................................. 6 3.3 Photos ........................................................................................................................................ 7 3.4 Dimensions ................................................................................................................................ 9 3.5 Product variants ....................................................................................................................... 10 4. Hardware ......................................................................................................................................... 11 4.1 Features ................................................................................................................................... 11 4.2 Environmental conditions ......................................................................................................... 12 4.3 Frequency bands...................................................................................................................... 13 4.3.1 ATM-02-ECE-R1 and ATM-02-ECE-T1 ............................................................................. 13 4.3.2 ATM-02-US-R1 and ATM-02-US-T1 .................................................................................. 14 4.3.3 ATM-02-CHN-R1 and ATM-02-CHN-T1 ............................................................................ 14 4.3.4 ATM-02-MEX-R1 and ATM-02-MEX-T1 ............................................................................ 15 4.3.5 ATM-02-ROW-R1 and ATM-02-ROW-T1 .......................................................................... 16 5. Warning Statements for the User Manual ........................................................................................ 17 5.1 Europe ..................................................................................................................................... 17 5.2 US /Canada .............................................................................................................................. 17 5.3 Modifications ............................................................................................................................ 17 5.4 RF Exposure Statement (MPE) ................................................................................................ 17 5.5 Brazil ........................................................................................................................................ 18 5.6 Taiwan ..................................................................................................................................... 18 5.7 Mexico ...................................................................................................................................... 19 5.8 Japan ....................................................................................................................................... 19 5.9 China........................................................................................................................................ 19 5.10 Korea ....................................................................................................................................... 19 6. Battery replacement ........................................................................................................................ 20 ________________________________________________________________________________________________________________________________ Page 2 VALEO Product Line Valeo peiker Telematics - www.valeo.de 1. Change Dokumentation Revision 1.0 1.1 1.2 1.3 Name Roman Leimenstol Roman Leimenstol Roman Leimenstol Roman Leimenstol Changes /Comment Initial Version Updated version on all variants Add frequency bands Add frequency bands for each variant Date 08.12.2017 31.01.2018 08.02.1018 13.02.2018 Notice The information in this document has been carefully reviewed and is believed to be accurate. Nevertheless, this document is subject to change without notice, and peiker acustic assumes no responsibility for any inaccuracies that may be contained in this document and makes no commitment to update the contained information, or to notify a person or organization of any updates. Peiker acustic reserves the right to make changes to the product, at any time, in order to improve reliability, function or design. Peiker acustic does not represent that products described herein are free from patent infringement or from any other third party right. No part of this document may be reproduced, adapted or transmitted in any form or by any means for any purpose, except as explicitly allowed in a written agreement signed by peiker acustic. Peiker acustic or its affiliates may have patents or pending patent applications, trademarks, copyrights or other intellectual property rights that apply to the ideas, material and information expressed herein. Confidential. All rights reserved. This document is peiker acustic GmbH restricted document. According to the Standards of Business Conduct, this document may not be shared outside peiker acustic GmbH. This document may be shared with the customer, if appropriate agreement for professional services exists. ________________________________________________________________________________________________________________________________ Page 3 VALEO Product Line Valeo peiker Telematics - www.valeo.de 2. Introduction 2.1. Scope 2.1.1. Purpose of the document The Advanced Telecommunication Module (ATM-02) roof and trunk variant is manufactured by peiker acustic GmbH (grantee) and sold as an OEM product. According to the US Code of Federal Regulations (47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc.), the grantee must ensure the end-user has the applicable and appropriate operating instructions for the device. In the case of this product the grantee must notify the OEM to notify the end-user. Peiker acustic GmbH will supply this document to the reseller or distributor to inform him what must be included in the end users manual for the commercial product and which installations guidelines for the antenna are applicable. 2.1.2. General Information The ATM-02 is assembled in the car during production. There are no other distribution channels than assembly in the cars production line or spare part replacement within car service. Please be advised that this product will need special trained professionals in configuring and installing the product. The product will be distributed through controlled distribution channel which has special trained professionals to install this product and will not be sold directly to the general public through retail stores. The ATM02 trunk variant is mounted invisible to the driver in the car behind the trunk cover panels. There are no direct interfaces to the driver or passengers. The ATM-02 is connected to the cars internal bus and control systems. The ATM-02 uses the external antenna of the car for cellular communications. 2.1.3. Contact Information peiker acustic GmbH Max-Planck-Strae 28-32 D-61381 Friedrichsdorf Germany http://www.valeo.com ________________________________________________________________________________________________________________________________ Page 4 VALEO Product Line Valeo peiker Telematics - www.valeo.de 3. Description of the product The Advanced Telecommunication Module 2 (ATM-02) is designed and produced by peiker acustic exclusively for OEM. The ATM-02 is assembled in the car during production. There are no other distribution channels than assembly in the cars production line or spare part replacement within car service. The ATM-02 is mounted invisible to the driver in the car under the roof plane or in the trunk area. In the roof version, the antenna is directly connected to the ATM-02. The trunk version is connected by wire to the antennas. The only direct interface of the ATM to the driver or passenger is a dedicated push button and LED (i.e. Mayday LED) to trigger an emergency call and signal the call status. Except this button and the LED, there are no direct interfaces of the ATM to the driver or passengers. The ATM-02 is connected to the internal bus and control systems of the car. The ATM-02 uses the external antenna of the car and contains an internal backup antenna. The ATM-02 uses a factory mounted embedded SIM card (MFF2). 3.1 Use Cases of the product The Advanced Telecommunication Module 2 is designed as the cars interface to the outer world in form of data and voice communication. Typical use cases are as follows:
Exchange of diagnostic data between the vehicle and the OEM server and OEM backend. Voice connection between vehicle and public safety answering point or vehicle and OEM call centers Network access service for data exchange e.g. supporting OEM-specific assist services and other Interface to networks for data exchange to support infotainment and comfort functions. online services like weather, maps, emails for in car use. Contains a GNSS receiver supporting GPS, GLONASS and Galileo satellite navigation systems for position determination to be used with further services The ATM-02 is connected to the vehicle internal bus (CAN-Bus) and network interface (OABR). It is automatically powered up if it receives a special signal via the car bus (CAN-Bus), e.g. when the car is in drive mode. The ATM-02 is also powered up with an out of band signaling from the cellular network, e.g. via a receiving SMS from the OEM service center (wake up message). The concierge calls (i.e. service calls) are performed via the multimedia audio interface of the vehicle and the head unit (HU) provides the user interface for this type of call. The audio signal is transmitted digitally via VoIP. In case of an emergency OEM Assist call the ATM-02 is able to perform an autonomous mobile originated call using the microphone and the loudspeaker connected directly to the device. The voice call itself is fully handled by the ATM-02. This call is originated automatically e.g. in case of a crash triggered by the Airbag ECU or manually with a service button in the control panel of the vehicle. In this case the head unit of the car is not involved in the connection. ________________________________________________________________________________________________________________________________ Page 5 VALEO Product Line Valeo peiker Telematics - www.valeo.de 3.2 Roof and Trunk version of ATM-02 For ATM-02 there are two assembly situations in the vehicle. Therefore, two versions of the ATM-02 are used: the roof version and the trunk version. The roof version is direct mounted with the roof antenna and has a direct connector with it. Also a internal backup antenna is included in the roof version of ATM-02. RF signals, which are not use from ATM-02 as DAB or SDARS, go through the ATM-02 to an external connector. Telephone antennas are connected via a splitter to provide the signal also to the vehicle. The trunk version is installed in the trunk. In each case spatially separated from the antennas. The main antennas and the backup antenna are external. The trunk version of the ATM-02 does not contain an internal backup antenna. Figure 1: drawing - ATM-02 trunk version (orange) mounting example Both variants are equipped with the same PCB board based on the same master circuit diagram. The 10-pole and 20-pole connectors to the vehicle infrastructure are identical. Both versions are using identical materials for the housing and are equipped with the same backup battery type and battery protection circuits. The internal backup antenna is only assembled in the ATM-02 roof variant. ________________________________________________________________________________________________________________________________ Page 6 VALEO Product Line Valeo peiker Telematics - www.valeo.de 3.3 Photos ATM-02 roof version ATM-02 trunk version Roof VersionTop view Roof version Left side view (not US) Roof version Right side view Trunk version Top view Trunk version Left side view Trunk version Right side view ________________________________________________________________________________________________________________________________ Page 7 VALEO Product Line Valeo peiker Telematics - www.valeo.de Photo - Roof version Bottom view Roof version Internal backup battery Photo - Trunk version Bottom view Trunk version Internal backup battery Roof version Side view with mounted antenna Trunk version View with connected antennas ________________________________________________________________________________________________________________________________ Page 8 VALEO Product Line Valeo peiker Telematics - www.valeo.de 3.4 Dimensions length ATM-02-[XXX]-R1 160mm ATM-02-[XXX]-T1 217mm width 112mm 100mm height 18mm 22,9mm weight 286g 235g Figure 2: ATM-02 Roof Isometric View Front View Figure 3: ATM-02 Roof Isometric View Back View Figure 4: ATM-02 Trunk Isometric View Back View Figure 5: ATM-02 Trunk Isometric View Back View ________________________________________________________________________________________________________________________________ Page 9 VALEO Product Line Valeo peiker Telematics - www.valeo.de 3.5 Product variants The ATM-02 is available in country specific variants. The variants supporting different cellular radio access technologies in different frequency bands. All variants are equipped with a GPS, GLONASS and Galileo GNSS receiver. The naming convention (model ID) of the specific variant is ATM-02-[XXX]-[Y]1. Example: the European variant of the roof version has the model ID ATM-02-ECE-R1. Table 1: Model id country variants
[XXX]
Country / Area ECE CHN US Europe, Russia, India, Kuwait, Malaysia, Taiwan, South Korea, Singapore China, Macau, Hong Kong USA, Canada, Puerto Rico RoW Japan, Australia, New Zealand, South African Area, Brazil MEX Mexico Table 2: model id roof/trunk version tag
[Y]
Version / Mounting location in vehicle Antenna is directly mounted on top of the ATM device (Roof Version) The device is mounted directly at the roof of the vehicle. Antenna cables are connected to the RF-connectors (Trunk Version) The device is mounted in the trunk area of the vehicle. R T The implemented module, the attached antenna as well as the embedded SIM card are depending on the country specific variant. Not all variants are listed in the tables above. ________________________________________________________________________________________________________________________________ Page 10 VALEO Product Line Valeo peiker Telematics - www.valeo.de 4. Hardware 4.1 Features Following Technologies and wireless protocols are implemented:
Name Short description GSM/GPRS/EDGE Rel. 9 Multi slot class 33 WCDMA/HSPA+ Rel. 9 up to HSDPA CAT 24 (42,2 Mbit/s) depending on variant HSUPA CAT 6 (5.76 Mbit/s) LTE Rel. 11 LTE-FDD and LTE-TDD, DL Cat 11 GNSS RAT GPS, Galileo, Glonass, BeiDou, SBAS, QZSS Max transmitter power Modulation (TX) GSM850, 900 GSM1800, 1900 Class 4 (2W) Class 1 (1W) EDGE850, EDGE900 Class E2 (0.5W) EDGE1800, EDGE1900 Class E2 (0.4W) WCDMA Rel.99, HSPA+
Class 3 (0.25W) GMSK GMSK 8-PSK 8-PSK QPSK, 16-QAM, 64-QAM, BPSK LTE Class 3 (0.25W) QPSK, 16-QAM, 64-QAM, ________________________________________________________________________________________________________________________________ Page 11 VALEO Product Line Valeo peiker Telematics - www.valeo.de 4.2 Environmental conditions Temperature range name Range values Comment Operating temperature range
-40C +90C Performance may slightly deviate from 3GPP specifications Operating temperature range
(3GPP conform)
-20C +65C conform to 3GPP specifications Storage temperature range
-40C +85C Name Value Operating relative humidity 5% 93% non-condensing Norm Value International Protection Marking according to ISO 20653 IP40 ________________________________________________________________________________________________________________________________ Page 12 VALEO Product Line Valeo peiker Telematics - www.valeo.de 4.3 Frequency bands 4.3.1 ATM-02-ECE-R1 and ATM-02-ECE-T1 Supported frequency bands Frequencies / MHz GSM 900 UMTS VIII LTE 8 GSM 1800 LTE 3 UMTS I LTE 1 UMTS III LTE 7 LTE 20 LTE 28A LTE 32 LTE 38 880 - 915 1710 - 1785 1920 - 1980 1747,5 - 1785 2500 - 2570 824 - 862 703 718 1452 - 1496 2570 - 2620 ________________________________________________________________________________________________________________________________ Page 13 VALEO Product Line Valeo peiker Telematics - www.valeo.de 4.3.2 ATM-02-US-R1 and ATM-02-US-T1 Supported frequency bands Frequencies / MHz GSM 850 UMTS V, LTE 5 LTE 4 GSM 1900 UMTS II LTE 2 UMTS IV LTE 12 LTE 7 LTE 29 824 - 862 1710 - 1785 1850 - 1910 1732,5 1755 699 716 2500 - 2570 717 - 729 4.3.3 ATM-02-CHN-R1 and ATM-02-CHN-T1 Supported frequency bands Frequencies / MHz GSM 900 UMTS VIII GSM 1800 LTE 3 UMTS I LTE 1 LTE 7 LTE 38 LTE 40 LTE 41 880 - 915 1710 - 1785 1920 - 1980 2500 - 2570 2570 - 2620 2300 2400 2496 - 2690 ________________________________________________________________________________________________________________________________ Page 14 VALEO Product Line Valeo peiker Telematics - www.valeo.de 4.3.4 ATM-02-MEX-R1 and ATM-02-MEX-T1 Supported frequency bands Frequencies / MHz GSM 850 UMTS V, LTE 5 LTE 8 LTE 4 GSM 1900 UMTS II LTE 2 UMTS IV LTE 12 LTE 7 LTE 29 824 - 862 880 - 915 1710 - 1785 1850 - 1910 1732,5 1755 699 716 2500 - 2570 717 - 729 ________________________________________________________________________________________________________________________________ Page 15 VALEO Product Line Valeo peiker Telematics - www.valeo.de 4.3.5 ATM-02-ROW-R1 and ATM-02-ROW-T1 Supported frequency bands Frequencies / MHz GSM 850 UMTS V, UMTS VI LTE 5, LTE 19 GSM 900 UMTS VIII LTE 8 GSM 1800 LTE 3 GSM 1900 UMTS II UMTS I LTE 1 UMTS III UMTS XIX LTE 7 LTE 9 LTE 21 LTE 28B LTE 40 824 - 862 880 - 915 1710 - 1785 1850 - 1910 1920 - 1980 1747,5 - 1785 1750 1784,8 2500 - 2570 1749,9 1784,9 1447,9 1462,9 718 748 2300 2400 ________________________________________________________________________________________________________________________________ Page 16 VALEO Product Line Valeo peiker Telematics - www.valeo.de 5. Warning Statements for the User Manual The following certification markings and hints should be printed in the end users manual:
5.1 Europe This device must be supplied by a limited power source according to EN 62368-1. The clearance and protected creepage distances required by the final product must be withheld when the module is installed. The cooling of the final product shall not negatively be influenced by the installation of the module. 5.2 US /Canada This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 5.3 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by peiker acustic GmbH could void the user's authority to operate the equipment. Note: The provisions of CFR 15.105 (Information to the user) paragraphs (a) and (b) do not apply to this device. It is exempted from the technical standards under the provisions of 15.103(a). 5.4 RF Exposure Statement (MPE) The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is always maintained between the radiator (antenna) and the human body. This device must not be co-located or operating in conjunction with any other antenna or transmitter. ________________________________________________________________________________________________________________________________ Page 17 VALEO Product Line Valeo peiker Telematics - www.valeo.de 5.5 Brazil Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. 5.6 Taiwan Low Power device warning
-
-
(Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.)
-
(For Reducing RF Influence, Use Properly)
-
(For protect individual privacy, Use Properly)
- 250VA
(Input power cannot exceed 250VA)
-
(The accessory fuse must be used for input power to make protection at the front end) ________________________________________________________________________________________________________________________________ Page 18 VALEO Product Line Valeo peiker Telematics - www.valeo.de
-
(This device must be installed by expert and will not be sold directly to the general public through retail store) 5.7 Mexico La operacin de este equipo est sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. 5.8 Japan This device is granted pursuant to the Japanese Radio Law () and the Japanese Telecommunications Business Law () This device should not be modified; otherwise the granted designation number will become invalid. 5.9 China Class A product's warning:
A 5.10 Korea 20cm .
("This unit is recommended to use at least 20cm apart from the human body.") ________________________________________________________________________________________________________________________________ Page 19 VALEO Product Line Valeo peiker Telematics - www.valeo.de 6. Battery replacement Open the battery compartment located on the lower right corner of the device. Remove the battery and replace it with a new one of the same type (BMW 6833994-02). Close the battery compartment by pushing the lid towards the housing until it is locked. ________________________________________________________________________________________________________________________________ Page 20 VALEO Product Line Valeo peiker Telematics - www.valeo.de
This product uses the FCC Data API but is not endorsed or certified by the FCC