M70 Bluetooth Headset Bluetooth Headset - User manual 2013.10.15

SELECT LANGUAGE GET PAIRED TAKE CONTROL Wearing your headset, power it on. The first time you do, you will be prompted to select your language from a set of three options. When completed, you will hear "pairing", go to the

"settings" menu on your phone to connect to your headset. 1 When the headset indicator lights flashes red and blueactivate Bluetooth on your phone and set it to search for new devices. iPhone* Settings > Bluetooth > On Android Smartphones* Settings > Wireless &

Networks > Bluetooth: On > Scan for devices 2 If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, the indicator lights stops flashing. for 2 seconds. Answer or end a call Tap the Call button Decline a call Press the Call button Adjust the volume Tap the Volume up (+) or down () button. Mute on During a conversation, simultaneously tap the Volume (+) and () buttons. You will hear mute on, this voice alert will be repeated once. After that an alert tone repeats every 15 minutes when mute is on. for 2 seconds, wait for Activate voice dial (phone feature) Press the Call button the phone prompt and then tell the phone to dial the name of a stored contact. Change language Reselect the headset language at any time by putting your headset into pair mode. Press the Call button flashes red and blue and you hear "pairing, please select a different language."

Redial To call your last number dialed, double tap the Call button until the indicator light

. ADJUST THE FIT The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either ear. To adjust the fit, you can rotate the eartip on the headset or add the optional clip-on earloop. For the best voice pickup, always check that the headset points toward the corner of your mouth. CHARGE Your new headset has enough power to pair and make a few calls. It takes 2 hours to fully charge the headset; the indicator light blue once charging is complete. turns solid FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning The equipment complies with FCC RF exposure limits set forth for anuncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. NEED MORE HELP?

Find a local support number plantronics.com/support Read detailed online user guide plantronics.com/documentation 2013 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. iPhone is a trademark of Apple, Inc. Patents US 5,712,453; Patents pending pn200723-XX (08.13) am200274-XX SAVE POWER HEAR IT WHISPER USE TWO PHONES STAY CONNECTED KNOW HOW TO RECONNECT LISTEN TO MUSIC AND MORE If you leave your headset powered on but out of range of your paired phone for more than 90 minutes, your headset will conserve its battery power by entering into a DeepSleep mode. Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your phone is also ringing, tap the Call button answer your call. again to Your headset tells you about status changes in English. For example:

Power on Pairing successful Talk time (x) hours Mute on

"Incoming call"

"Answering call"

Lost connection Recharge headset Once you have paired your two phones, it's easy to answer calls from either phone. When on a call, you will hear a ringtone notification of an incoming call from the second paired phone. To answer the second call, you must first end your current call (tap the Call button) so new call automatically answers. To pair a second phone or a new phone see

"Change language" in the Take Control section. Bluetooth has a working range of up to 33 feet

(10 meters) between the phone and headset before audio degrades and the connection is lost. If you lose connection your headset will try to reconnect once you move back into range. For best audio reception, keep your phone and headset on the same side of your body. If your headset loses the Bluetooth connection with your phone, it will automatically try to reconnect. If your headset can't reconnect, tap the Call button once or manually connect through the phone's Bluetooth device menu. If your headset remains out of range for more than 90 minutes, the DeepSleep mode will activate. If your phone also has the Bluetooth A2DP

(Advanced Audio Distribution Profile) stereo music feature, your music, podcasts, navigation and other streaming audio can be heard through this headset. Music Tracking While in A2DP mode you can adjust the volume by tapping the Volume up or Volume down button. To skip tracks, press and hold the Volume up or Volume down button until the track skips forward or backward. To play/pause hold both sides of the Volume button at the same time. GET STARTED M70 M90 SERIES Designed in Santa Cruz, California