submitted | available | document details (if available) | source link |
---|---|---|---|
Y900-17ISK UG EN Lenovo Acrobat Distiller 9.5.5 (Windows) |
various | User manual 1) | Users Manual | 3.16 MiB |
Lenovo ideapad Y900-17ISK User Guide Read the safety notices and important tips in the included manuals before using your computer. Notes Before using the product, be sure to read Lenovo Safety and General Information Guide first. Some instructions in this guide may assume that you are using Windows 10. If you are using other Windows operating system, some operations may be slightly different. If you are using other operating systems, some operations may not apply to you. The features described in this guide are common to most models. Some features may not be available on your computer or your computer may include features that are not described in this user guide. The illustrations in this manual may differ from the actual product. Please refer to the actual product. Regulatory Notice For details, refer to Guides & Manuals at http://support.lenovo.com.
First Edition (October 2015) Copyright Lenovo 2015. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration GSA contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925. Contents Chapter 1. Getting to know your computer..................................................................................... 1 Top view ......................................................................................................................................................... 1 Left-side view ................................................................................................................................................ 5 Right-side view .............................................................................................................................................. 8 Bottom view ................................................................................................................................................. 10 Chapter 2. Starting to use Windows 10......................................................................................... 11 Configuring the operating system for the first time .............................................................................. 11 Operating system interface ........................................................................................................................ 11 Putting the computer to sleep or shutting it down ................................................................................ 13 Task and desktop management ................................................................................................................ 15 Connecting to a wireless network ............................................................................................................ 16 Get Started app ............................................................................................................................................ 16 Chapter 3. Lenovo OneKey Recovery System.............................................................................. 17 Chapter 4. Troubleshooting............................................................................................................ 18 Frequently asked questions ....................................................................................................................... 18 Troubleshooting .......................................................................................................................................... 20 Trademarks ...................................................................................................................................... 24 i Chapter 1. Getting to know your computer Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2 1 2 3 4 7 Note: The dashed areas indicate parts that are not visible externally. 8 4 5 6 7 Attention:
Do not open the display panel beyond 130 degrees. When closing the display panel, be careful not to leave pens or any other objects in between the display panel and the keyboard. Otherwise, the display panel may be damaged. 1 Chapter 1. Getting to know your computer a Integrated camera b Built-in microphone
(with noise reduction) c Computer display d Speakers e Power button f Numeric keypad g Wireless LAN antennas h Touchpad Use the camera for video communication or taking photos. Captures sound which can be used for video conferencing, voice narration, or audio recording. Provides brilliant visual output. Provide the audio output. Press this button to turn on the computer. For details, see Using the keyboard on page 3. Connect to a wireless LAN adapter to send and receive wireless radio signals. The touchpad functions as a conventional mouse. One piece multi-touch ClickPad: To move the pointer on the screen, slide your fingertip over the pad in the direction in which you want the pointer to move. Left-click area: Clicking in this area corresponds to the functions of clicking the left button on a conventional mouse. Right-click area: Clicking in this area corresponds to the functions of clicking the right button on a conventional mouse. Note: You can enable/disable the touchpad by pressing Fn + F6. 2 Chapter 1. Getting to know your computer Using the keyboard Your computer has a numeric keypad and function keys incorporated in its standard keyboard. Numeric keypad The keyboard has a separate numeric keypad. To enable or disable the numeric keypad, press the Num Lock key. Function key combinations Through the use of the function keys, you can change operational features instantly. To use this function, press and hold Fn
; then press one of the function keys b
. a 2 1 3 Chapter 1. Getting to know your computer The following describes the features of each function key. Fn + F1:
Fn + F2:
Fn + F3:
Fn + F5:
Fn + F6:
Fn + F9:
Fn + F10:
Fn + F11:
Fn + PrtSc:
Fn + Insert:
Fn + Home:
Fn + End:
:
/
Fn +
Fn +
:
/
Fn + Space
(on select models):
Enters sleep mode. Turns on/off the backlight of the LCD screen. Opens the interface for selecting display options. Enables/disables Airplane mode. Enables/disables the touchpad. Opens the Settings charm. Opens the Search charm. Displays current apps. Activates the system request. Enables/disables the scroll lock. Activates the pause function. Activates the break function. Increases/decreases the display brightness. Increases/decreases the volume. Adjusts the keyboard backlight (off dim bright off). 4 Chapter 1. Getting to know your computer Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 2 3 4 5 6 a AC power adapter jack b Display port c HDMI port d RJ-45 port Connect the AC power adapter here. Connects the computer to a compatible projector, external monitor, or HDTV. Connects to devices with HDMI input such as a TV or an external display. Connects the computer to an Ethernet network. Note: For details, see Connecting network cables on page 7. e Type-C port Type-C port supports:
USB 3.0 Native display port 1.2 video output VGA/HDMI output using Type-C VGA/HDMI adapter (sold separately) 6 USB ports Connect to USB devices. 5 Chapter 1. Getting to know your computer Connecting USB device Your computer comes with four USB ports compatible with USB devices. The first time you plug a USB device into a particular USB port on your computer, Windows automatically installs a driver for that device. After the driver has been installed, you can disconnect and reconnect the device without performing any additional steps. Note: Typically, Windows detects a new device after it has been connected, and then installs the driver automatically. However, some devices may require you to install the driver before connecting. Check the documentation provided by the devices manufacturer before connecting the device. Before disconnecting a USB storage device, make sure your computer has finished transferring data to that device. Click the Safely Remove Hardware and Eject Media icon in the Windows notification area to remove the device before disconnecting. Note: If your USB device uses a power cord, connect the device to a power source before connecting it. Otherwise, the device may not be recognized. 6 Chapter 1. Getting to know your computer Connecting network cables To insert a network cable, do the following:
1 Hold one connector of the network cable to press the RJ-45 cover down gently 2 Insert the connector into the RJ-45 port b
. a
. Software configuration Consult your Internet Service Provider (ISP) for details on how to configure your computer. 7 Chapter 1. Getting to know your computer Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 2 3 4 5 6 a Novo button When the computer is off or in hibernation mode, press this button to start the Lenovo OneKey Recovery System or the BIOS setup utility, or to enter the boot menu. Note: You can use the tip of an unfolded paper clip (or similar object without a sharp tip) to gently press the Novo button. b Memory card slot c Headphone jack 4 Microphone jack 5 USB ports 6 Kensington lock slot Accepts memory cards (not supplied). Connects to external headphones. Connects to external microphones. Connect to USB devices. Attach a security lock (not supplied) here to help protect your computer from theft and unauthorized use. You can attach a security lock to your computer to help prevent it from being removed without your permission. For details on installing the security lock, please refer to the instructions shipped with the security lock that you have purchased. Notes:
You are responsible for evaluating, selecting, and implementing the locking devices and security Before purchasing any security product, verify that it is compatible with this type of security keyhole. features. Lenovo offers no comment, judgment, or warranty regarding the function, quality, or performance of locking devices and security features. 8 Chapter 1. Getting to know your computer Using memory cards (not supplied) Your computer supports the following types of memory cards:
Secure Digital (SD) card
Secure Digital High Capacity (SDHC) card
Secure Digital eXtended Capacity (SDXC) card
MultiMediaCard (MMC) Notes:
Insert only one card in the slot at a time. This card reader does not support SDIO devices (e.g., SDIO Bluetooth and so on.). Inserting a memory card Slide the memory card in until it clicks into place. Removing a memory card 1 Push the memory card in until you hear a click. 2 Gently pull the memory card out of the memory card slot. Note: Before removing the memory card, disable it by using the Windows safely remove hardware and eject media utility to avoid data corruption. 9 Chapter 1. Getting to know your computer Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 1 2 a Ventilation slots Dissipate internal heat. Note: Make sure that the ventilation slots are not blocked or else the computer may overheat. b Speaker Provides subwoofer audio output. 10 Chapter 2. Starting to use Windows 10 Configuring the operating system for the first time - - - - - - - - - - - - - - - - -
You may need to configure the operating system when it is first used. The configuration process may include the procedures below:
Accepting the end user license agreement
Configuring the Internet connection
Registering the operating system
Creating a user account Operating system interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 comes with a powerful and useful start menu. To open the start menu, do one of the following:
Press the Windows key on the keyboard.
Select Start on the lower-left corner of the desktop. 1 2 3 4 5 6 7 a Get Started app b Settings button c Power button d All apps button e Start button f Search box g Task view button 11 Chapter 2. Starting to use Windows 10 Settings Settings lets you perform basic tasks. You can also search for more settings with the settings search box in the upper-right corner. To open the settings, do the following:
Open the start menu, and then select Settings
. Personalize the start menu You can personalize the start menu with your favorite apps. To personalize the start menu, do the following:
1 Open the start menu, and then select All apps 2 Right click the app you want to add to the start menu, and then select Pin to Start. to display the apps list. Note: You can also drag apps from the Most used or All apps columns to add them to the start menu. 12 Chapter 2. Starting to use Windows 10 Putting the computer to sleep or shutting it down - - - - - - - - - - - - - - - - - - - -
When you have finished working with your computer, you can put it to sleep or shut it down. Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following:
Close the display lid.
Press the Power button.
Open the start menu, and then select Power Sleep. Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode) before you move your computer. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data. To wake the computer, do one of the following:
Press any key on the keyboard.
Press the Power button. 13 Chapter 2. Starting to use Windows 10 Shutting down the computer If you are not going to use your computer for a long time, shut it down. To shut down the computer, do one of the following:
Open the start menu, and then select Power Shut down.
Press and hold or right-click the Start button in the lower-left corner and select Shut down or sign out Shut down. 14 Chapter 2. Starting to use Windows 10 Task and desktop management - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Task view To open the task view, do one of the following:
Select the Task view button on the task bar.
Press the Windows key
Swiping in from the left edge of the screen. (on select models)
+ Tab. Virtual desktop management Windows 10 supports the ability to create, manage and switch between virtual desktops. To create a new virtual desktop, do one of the following:
Open the task view, and then select New desktop.
Press the Windows key
+ Ctrl + D. To switch between different desktops, do one of the following:
Open the task view and select the desktop you want active.
Press the Windows key
+ Ctrl +
/
to scroll through the desktops youve created. 15 Chapter 2. Starting to use Windows 10 Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Enabling wireless connection To enable wireless functions, do the following:
1 Press Fn + F5 to disable airplane mode. 2 Click on the lower-right corner of the task bar to open the network configuration page. Connecting to a wireless network After wireless has been enabled, the computer will automatically scan for available wireless networks and display them in the wireless network list. To connect to a wireless network, click the network name in the list, and then click Connect. Note: Some networks require a network security key or passphrase for connection. To connect to one of those networks, ask the network administrator or the Internet service provider (ISP) for the security key or passphrase. Get Started app - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 also provides the Get Started app to explain the new features of Windows 10. You can find it on the start menu. To open the Get Started app, do one of the following:
Open the start menu and select Get Started
Press Fn + F1 (depending on your keyboard layout). 16 Chapter 3. Lenovo OneKey Recovery System The Lenovo OneKey Recovery System is software designed to back up and restore your computer. You can use it to restore the system partition to its original status in case of a system failure. You can also create user backups for easy restoration as required. Notes:
If your computer is preinstalled with a GNU/Linux operating system, OneKey Recovery System is not available. To utilize the features of the OneKey Recovery System, your hard disk already includes a hidden partition by default to store the system image file and the OneKey Recovery System program files. This default partition is hidden for security reasons, which explains why the available disk space is less than the stated capacity. Backing up the system partition You can back up the system partition to an image file. This image file can be used to restore the system partition. To back up the system partition:
1 In Windows, press the Novo button or double-click OneKey Recovery icon to start the Lenovo OneKey Recovery System. 2 Click System Backup. 3 Select a back-up location and click Next to start the backup. Notes:
You can choose a back-up location on the local hard disk drive or an external storage device. Remove the removable hard disk drive before starting the Lenovo OneKey Recovery System. Otherwise, data from the removable hard disk drive might be lost. The back-up process may take a while. The back-up process is only available when Windows can be started normally. Restoring You can choose to restore the system partition to its original status or to a previously created back-up point. To restore the system partition:
1 In Windows, press the Novo button or double-click OneKey Recovery icon to start the Lenovo OneKey Recovery System. 2 Click System Recovery. The computer will restart to the recovery environment. 3 Follow the on-screen instructions to restore the system partition to its original status or to a previously created back-up point. Notes:
The recovery process is irreversible. Make sure to back up any data you wish to save on the system partition before starting the recovery process. The recovery process may take a while. So be sure to connect the AC power adapter to your computer during the recovery process. The above instructions should be followed when Windows can be started normally. If Windows cannot be started, then follow the steps below to start the Lenovo OneKey Recovery System:
1 Shut down the computer. 2 Press the Novo button. From Novo Button Menu, select System Recovery and press Enter. 17 Chapter 4. Troubleshooting Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This section lists frequently asked questions by category. Finding information What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your computer contains safety precautions for using your computer. Read and follow all the precautions when using your computer. Where can I find the hardware specifications for my computer?
You can find the hardware specification for your computer on the printed flyers which came with your computer. Where can I find warranty information?
For detailed warranty information on this machine, please visit below website to check out:
support.lenovo.com/warrantystatus. Drivers and preinstalled software Where are the installation discs for Lenovo preinstalled software (desktop software)?
Your computer did not come with installation discs for Lenovo preinstalled software. If you need to reinstall any preinstalled software, you can find the installation program on the D partition of your hard disk. If you cannot find the installation program there, you can also download it from the Lenovo consumer support website. Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo provides drivers for all the hardware devices that you need on the D partition of your hard disk. You can also download the latest device drivers from the Lenovo consumer support website. Lenovo OneKey Recovery System Where are the recovery discs?
Your computer did not come with any recovery discs. Use the Lenovo OneKey Recovery System if you need to restore the system to its original factory status. What can I do if the back-up process fails?
If you can start the backup but it fails during the back-up process, try the following steps:
1 Close all open programs, and then restart the back-up process. 2 Check to see if the destination media is damaged. Select another path and then try again. When do I need to restore the system to its factory status?
Use this feature when the operating system fails to start up. If there is critical data on the system partition, back it up before starting recovery. 18 Chapter 4. Troubleshooting BIOS setup utility What is the BIOS setup utility?
The BIOS setup utility is a ROM-based software. It displays basic computer information and provides options for setting boot devices, security, hardware mode, and other preferences. How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer. 2 Press the Novo button and then select BIOS Setup. How can I change the boot mode?
There are two boot modes: UEFI and Legacy Support. To change the boot mode, start the BIOS setup utility and set boot mode to UEFI or Legacy Support on the boot menu. When do I need to change the boot mode?
The default boot mode for your computer is UEFI mode. If you need to install a legacy operating system, such as Windows, Linux or Dos, etc. (that is, any operating system before Windows 8) on your computer, you must change the boot mode to Legacy Support. The legacy operating system, such as Windows, Linux or Dos, etc. cannot be installed if you don't change the boot mode. Getting help How can I contact the customer support center?
See Chapter 3. Getting help and service in the Lenovo Safety and General Information Guide. 19 Chapter 4. Troubleshooting Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Display problems When I turn on the computer, nothing appears on the screen. When I turn on the computer, only a white cursor appears on a blank screen. The screen goes blank while the computer is on. BIOS password problems I forgot my password. If the screen is blank, make sure that:
- The AC power adapter is connected to the computer, and the power cord is plugged into a working electrical outlet.
- The computer power is on. (Press the Power button again for confirmation.)
- The memory is installed correctly. If these items are properly set, and the screen remains blank, have the computer serviced. Restore backed-up files to your Windows environment or the entire contents of your hard disk to its original factory contents using the Lenovo OneKey Recovery System. If you still see only the cursor on the screen, have the computer serviced. Your screen saver or power management may be enabled. Do one of the following to exit from the screen saver or to resume from sleep mode:
- Touch the touchpad.
- Press any key on the keyboard.
- Press the Power button.
- Press Fn + F2 to confirm whether the backlight of the LCD screen has been turned off. If you forget your user password, ask the system administrator to clear your user password. If you forget your hard disk drive password, a Lenovo authorized servicer cannot reset your password or recover data from the hard disk. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the hard disk drive replaced. Proof of purchase is required, and a fee will be charged for parts and service. If you forget your administrator password, a Lenovo authorized servicer cannot reset your password. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the system board replaced. Proof of purchase is required, and a fee will be charged for parts and service. 20 Chapter 4. Troubleshooting Sleep problems The critical low-battery error message appears, and the computer immediately turns off. The computer enters sleep mode immediately after Power-on self-test
(POST). The battery power is getting low. Connect the AC power adapter to the computer. Make sure that:
- The battery pack is charged.
- The operating temperature is within the acceptable range. See Chapter 2. Use and care Information in the Lenovo Safety and General Information Guide. Note: If the battery pack is charged and the temperature is within range, have the computer serviced. The computer does not return from sleep mode, and the computer does not work. If your computer is in sleep mode, connect the AC power adapter to the computer, then press any key or the Power button. If the system still does not return from sleep mode, stops responding, or cannot be turned off, reset the computer. Unsaved data may be lost. To reset the computer, press and hold the Power button for four seconds or more. If the computer is still not reset, remove the AC power adapter. Display panel problems The screen is blank. Do the following:
- If you are using the AC power adapter or the battery pack, to make and the battery status indicator is on, press Fn +
the screen brighter.
- If the power indicator is blinking, press the Power button to resume from sleep mode.
- If the problem persists, follow the solution in the next problem The screen is unreadable or distorted.
- Press Fn + F2 to confirm whether the backlight of the LCD screen has been turned off. The screen is unreadable or distorted. Make sure that:
- The display device driver is installed correctly.
- The screen resolution and color quality are correctly set.
- The monitor type is correct. Incorrect characters appear on the screen. Is the operating system or programs installed correctly?
If they are installed and configured correctly, have the computer serviced. 21 Chapter 4. Troubleshooting Sound problems No sound can be heard from the speakers even when the volume is turned up. Battery pack problems Your computer shuts down before the battery status indicator shows empty.
-or-
Your computer operates after the battery status indicator shows empty. The operating time for a fully charged battery pack is short. The computer does not operate with a fully charged battery pack. The battery pack does not charge. A hard disk drive problem Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device. Discharge and recharge the battery pack. The surge protector in the battery pack might be active. Turn off the computer for one minute to reset the protector;
then turn on the computer again. The hard disk drive does not work. Make sure that the hard disk drive is included in the Boot menu in the BIOS setup utility correctly. OneKey Recovery System problems Backup cannot be made. Make sure that you are currently using a Windows operating system. There may not be enough space to store the backed-up data. You will need to free more hard disk space on your backup's partition. Failure to restore system partition to factory default. The system partition (e.g. the partition size or the drive capacity of C) has been modified. 22 Other problems Your computer does not respond. The computer does not start from a device you want. The connected external device does not work. Chapter 4. Troubleshooting To turn off your computer, press and hold the Power button for four seconds or more. If the computer still does not respond, remove the AC power adapter. Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network. See the Boot menu of the BIOS setup utility. Make sure that the BIOS setup utility is set so that the computer starts from the device you want. Also make sure that the device from which the computer starts is enabled. Make sure that the device is included in the Boot menu in the BIOS setup utility correctly. While turned off, press the Novo button to select the device you want the computer to start from. Do not connect or disconnect any external device cables other than USB while the computer power is on. Otherwise, you might damage your computer. When using high power consumption external devices such as an external USB optical disk drive, use an external device power adapter. Otherwise, the device may not be recognized, or the system may shut down as a result. 23 Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo OneKey ideapad Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, products, or service names may be trademarks or service marks of others. 24 L e n o v o C h n a i 2 0 1 5 en-US Rev. AA00
This product uses the FCC Data API but is not endorsed or certified by the FCC