| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 08 2005 | December 08 2005 |
| various | Users Manual Revised | Users Manual | 318.69 KiB | December 08 2005 |
Table of contents Warranty and Safety Setting up the phone General information Messages Phonebook Call Options Applications Camera Settings My Data Games Browser Warranty and Safety This section addresses important warranty and safety issues. You should read and thoroughly familiarise yourself with this section before using your phone. After Sales Service Your Toshiba mobile telephone contains no user serviceable parts, for further information on service please contact your retailer or service provider. Safety Guidelines Follow the guidelines below to use your phone in a safe and legal manner. General Use your phone in the intended manner (holding it to your ear). Incorrect usage may affect its performance. Only qualified service personnel should install or repair the phone and its accessories. Use only compatible batteries and accessories. Using incompatible items may permanently damage the phone. Do not connect the phone to any other device without reading the provided documentation. The other device may be incompatible. When making emergency calls from your phone, ensure that the phone is switched on and in service. Interference may affect your phones performance. Once you move away from the source of the interference, the phone should operate as usual Operating environment Do not use a hand-held phone while driving or otherwise operating machinery. If using a hand-held phone, park the vehicle before conversing. If using an integrated hands-free device, make sure the phone is securely in its holder. Switch your phone off if you are entering a hospital or other such institution. Medical equipment may be affected by the phone so you should observe any building regulation governing phone usage. Switch your phone off when on an aircraft. The aircrafts systems may be affected by the phone signal. You are legally obliged to comply with this recommendation. Switch your phone off in any facility where posted notices so require. Do not use your phone when refuelling. You should keep your phone away from fuel and chemicals. Switch your phone off when blasting is in progress. Observe any provided guidelines or regulations. Switch your phone off when in an area with a potentially explosive atmosphere (for example fuel storage areas, spray paint facilities etc.). Electronic devices If you wear a pacemaker, or are in the company of someone who does, you should be aware that there is small risk of your phone interfering with the operation of the pacemaker. Only certain types of pacemaker are affected and only if the mobile phone is placed next to it. You should contact your doctor or the manufacturer of the pacemaker for more information. Your phone may interfere with some hearing aids. If this happens you should contact your service provider or doctor. Your phone may interfere with the functionality of inadequately shielded medical devices. Consult a physician or the manufacturer of the device to ensure safe procedure. Your phone may interfere with the functionality of any inadequately shielded electronic system in a motor vehicle. Examples of this type of system include air-bags and fuel injection. You should contact the manufacturer of the vehicle to ensure that it is properly shielded. Battery safety Only use batteries approved by Toshiba and only recharge the battery with the recommended charger supplied by Toshiba. When the charger is not in use disconnect it from the power source. Do not leave the battery connect to the charger and power source for longer then necessary as overcharging it will shorten its life. Do not short-circuit the battery. Accidental short-circulating can occur when a metallic object causes a direct connection between the +
and terminals of the battery. Do not leave the battery in a cold (for example, a fridge) or hot place (for example, in a car exposed to direct sunlight) as this will effect its performance. Do not dispose of the battery in a fire. Do not dispose of the battery in an ordinary bin. The battery contains toxic chemicals and must be disposed of in the correct manner. Contact your local authority for more information. SOS soft key The SOS soft key enables you to call the emergency services without entering your PIN or when your phone is blocked. The SOS soft key is only active prior to entering the PIN. To use it simply press and confirm with the Yes soft key. SAR Information Your TS10 meets all EU requirements and recommended limits for exposure to radiowaves. These limits were developed and established by independent scientific organisations. In recent times there has been a lot of speculation about the risks users may be exposing themselves to by using mobile phones. Toshiba is fully committed to providing consumers with all relevant and useful information about such risks. It is also important to bear in mind that all Toshiba products are rigorously tested to ensure that they meet all relevant safety guidelines. All electrical devices emit radiation. Mobile phones are low power radio devices that transmit and receive microwave radiation at frequencies of about 900 Megahertz (MHz) and 1900 MHz. There are many other sources of radio waves. Television broadcasts in the UK operate at frequencies between 400 MHz and 860 MHz and microwave communication links (dishes) operate at frequencies above 1000 MHz. The international standard for measuring how much radiation a user absorbs, when using a mobile phone, is known as the Specific Absorption Rate (SAR). SAR measures the amount of radiation exposure to weight. The EU limit is 2.0 watts/kilogram averaged over 10 grams of tissue and FCC limit is 1.6 watts/kilogram over 1g of tissue (averaged over six minutes exposure). This limit incorporates a substantial safety margin. Toshiba conducts rigorous testing and is fully committed to providing consumers with all the relevant information available. For more information about mobile phones and radiation, please visit the websites listed below:
Care and Maintenance If you maintain your phone in good condition, the quality of your phone usage as well as the phone life span will be greatly enhanced. If you follow the suggestions below, this will also help you to fulfill warranty obligations. Keep the phone and all the parts and accessories out of the reach of small children. Keep the phone dry as moisture of any kind can contain minerals that will corrode the electronic circuits. Do not use or store the phone in dusty or dirty locations as the moving parts of the phone can be damaged. Do not use or store the phone in hot areas. High temperatures will shorten the life span of the phone, damage the battery or warp/ melt the plastic used in the phones manufacture. Do not store the phone in cold areas. When there is a difference in temperature between the room and the phone, condensation can form inside the phone, causing damage to the electronic circuits. Do not open the phone unless absolutely necessary, for example, to install the battery or SIM card. We recommend that you go to your dealer when problems arise with either of these items and allow their experts to handle the phone instead. Do not mishandle or abuse the phone. Dropping it, knocking or shaking it can damage the internal circuits. Do not use harsh chemicals, strong detergents, or cleaning solvents to clean the phone. If you must clean it, then use a soft cloth that has been slightly dampened with a mild soap and water solution. Do not apply paint or other such substances to the phone. This could clog the phones moving parts. If the phone or any of the accessories are not working as they should, please consult your dealer who can provide you with the expert assistance that you require. Interference may affect your phones performance. This is perfectly normal and once you move away from the source of the interference, the phone should operate as usual. Do not use harsh chemicals, strong detergents, or cleaning solvents to clean the phone. If you must clean it, then use a soft cloth that has been slightly dampened with a mild soap and water solution. Do not apply paint or other such substances to the phone. This could clog the phones moving parts. If the phone or any of the accessories are not working as they should, please consult your dealer who can provide you with the expert assistance that you require. Interference may affect your phones performance. This is perfectly normal and once you move away from the source of the interference, the phone should operate as usual. Do not use harsh chemicals, strong detergents, or cleaning solvents to clean the phone. If you must clean it, then use a soft cloth that has been slightly dampened with a mild soap and water solution. Do not apply paint or other such substances to the phone. This could clog the phones moving parts. If the phone or any of the accessories are not working as they should, please consult your dealer who can provide you with the expert assistance that you require. Interference may affect your phones performance. This is perfectly normal and once you move away from the source of the interference, the phone should operate as usual. FCC RF Exposure Information In August 1996 the Federal Communication (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previous set by both U.S.and international standards bodies.The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved internal antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. FCC Regulations:
This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible For compliance could void the users authority to operate the equipment. Body-worn Operation This device was tested for typical body-worn operations. To comply with FCC RF exposure requirements, a minimum separation distance of 0.6 inches (1.5 cm) must be maintained between the user's body and the phone, including the antenna.Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure requirements and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov. Setting Up the Phone This section describes basic operations such as inserting your SIM card, charging the battery, and entering your PIN. The following must be done before you begin using the phone:
Ensure that the SIM card is inserted Ensure that the battery is inserted Charge the phones battery SIM Card Your SIM card identifies your phone on the network and stores your details, including your PIN, call history, and subscription details. It can also be used to store some phone book information - see Phone Book Memories on page XX for more information. You should only remove your SIM card if absolutely necessary. If it gets lost or damaged, the information stored on it cannot be retrieved. Inserting or removing the SIM card With your unfolded phone facing towards you, you may locate the SIM card room right below your main LCD screen. To insert or remove your SIM card (Diagram A-C):
Diagram A:
Open the SIM door. Diagram B:
Insert your SIM card into the SIM card holder with the cards metallic connectors facing down and the notched corner in the right direction. Diagram C:
Close the SIM door. Battery Before you can power on your phone for the first time, you need to install the phones battery and charge it. Note that the battery coming with your phone is not charged. Changing or removing the battery To remove the battery (Steps 1-2):
1. With the back of the phone facing you, slide the battery cover and remove the battery cover and battery, as shown below (Diagram D-F):
2. Replace the battery and the battery cover as shown below (Diagram G-I). Diagram D:
Slide the battery door backward. Diagram E:
Remove the battery door from the phone. Diagram F:
Lift the battery away from the phone. Diagram G:
Install the battery with the metallic connectors facing forward. Diagram H:
Gently press down the battery. Diagram I:
Install the battery door. Charging the battery To charge the battery (Steps 1-3):
1. 2. Locate the charger socket as shown in Diagram J. Connect the charger in the right direction, as shown in Diagram K. The marked part on the charger connector should face side up. The charger connection screen will be displayed. Diagram J:
The charger socket. Diagram K:
Connect the charger with the marked part facing up. Connect the charger to an AC power socket. Description Battery full Battery nearly full Battery nearly empty Battery empty 3. Disconnecting the charger To disconnect the charger, grip it tightly and pull. You should disconnect the charger from the power outlet before disconnecting the charger from the phone. Charging Indicator The first time you charge your battery, you should leave it charging for 8 hours. The battery only achieves optimum performance after two or three complete charges. When the battery power is low, the phone starts beeping and Battery Low is displayed. Icon For safety information regarding the battery, please refer to Battery Safety on page XX. Note: Always turn off the phone before removing the battery. PINs When you switch on your phone, you will be requested to enter your PIN (personal identification number). This number should be in the documentation supplied by your service provider. If you enter the wrong PIN three times in a row, your phone will become blocked. You will require your PUK number to unblock it. For more information about your PIN and PUK numbers, see PIN Settings on page XX. General Information Parts and functions Call key End key Keys Each of the keys on your phone has one or more functions. The table below explains the various functions that each key has. Key Soft keys 4-way key Centre key Function(s) Press to access the functions available for the soft keys. For more information see Soft keys on page XX. To navigate the phones menu system. For more information see 4-way key on page XX. To enter the selected menu, confirm the selection, submit an entered number or piece of text and to launch the camera from the standby screen. For more information see 4-way key on page XX. To dial an entered or selected number or accept an incoming call; from the standby screen, press once to display the Dialled calls list, and press twice to redial the last called number. To turn on/off the phone, reject an incoming call, end a call, cancel a selection, return to the standby screen from any phone menu system. From standby screen, long press to call the voicemail. Press to access the FAK (Fast Access Key) function. For more information see Fast Access key on page XX. From the standby screen, long press to enter + and display the +List. In call, press to turn on/off the loud speaker. In camera preview mode, press to display menu options. In call, press to turn on/off the mute. In camera preview mode, press to turn on/off camera icons. 1 2-9 0
Soft keys Your phone has two keys called soft keys. The function of these keys depends on the menu being displayed at the time. The available function is displayed above the soft key, as shown below. The default soft keys (that is, the ones displayed in stand-by mode) are Menu and Browser. Pressing either of these soft keys will take you directly to the function. Note: When you turn on your phone, an SOS soft key is displayed before you can enter your PIN. See SOS soft key on page XX for more information. 4-Way key Your phone has an easy-to-use menu system that allows you to navigate by using the 4-way key. Left To scroll left or move the cursor to the left of the screen. To access Message menu from the standby screen. To decrease exposure under camera preview mode. Quick keys To View recently called numbers Call voice mail Access Phone modes Access My data Access Message Access Phonebook Quick dial a phonebook number Lock/Unlock the keypad Up To scroll up lists or move up the cursor. To access Phone modes menu from the standby screen Long press to activate the silent mode. To zoom in under camera preview mode. To increase volume during a call. Down To scroll up or move down the cursor. To access My data menu from the standby screen. To zoom out under camera preview mode. To decrease volume during a call. Key sequence Press Call key once Press and hold 1 Press Up Press Down Press Left Press Right Enter the Record no. and press # to quickly display the number and press Call key to dial the number Long press # key. For more information see keypad locking on page XX. Press and hold End key Press Centre key or Left Soft key Press End key Right To scroll right or move the cursor to the right of the screen. To access Phonebook menu from the standby screen. To increase exposure under camera preview mode. Centre key To confirm the function. To access Camera and press again to take a picture. To toggle your desired function on/off in the each menu screen. Mode Standby Standby Standby Standby Standby Standby Standby Standby Standby When In the menu When in the menu During a call When receiving a call When entering text When entering text Switch on/off the phone Select a menu item Exit a menu Put a call on hold or retrieve a call on hold Press Hold or Retrieve soft keys Reject or end a call Enter a space Enter a symbol Press End key Press 0 once Press 1 until the correct symbol appears or press # to display the symbol chart Main menu Your phones menu structure starts with Main menu in a grid view. To access Main menu, press Menu from the standby screen to open Main menu and navigate to the desired menu by using 4-way keys and press Centre key or Select to confirm. The main menu consists the following 9 menus:
Message Phonebook Call Options Applications My data Settings Browser Camera Games Provides SMS/MMS messaging services. For more information, see Message on page XX. Allows you to take a picture or shoot a video clip. For more information see Camera on page XX. Provides a variety of settings. For more information, see Settings on page XX. Stores a list of picture and sound files. For more information, see My data on page XX. Provides a number of games in your phone. For more information, see Games on page XX. Provides access to connecting to the network. For more information, see Browser on page XX. 1 Message 2 Phonebook Stores a list of phone contacts. For more information, see Phonebook on page XX. 3 Call options Records a list of call history. For more information, see Call options on page XX. 4 Applications Provides calendar, clock, calculator and other functions. For more information see Applications on page XX. 5 Camera 6 Settings 7 My data 8 Games 9 Browser Menu structure Key Main menu 1 Message 2 Phonebook 3 Call options 4 Key Main menu 2ed level Create Inbox Draft Outbox Predefined text Settings Memory status Cell broadcast Lists Dialled calls Missed calls Received calls Time/charge Charge settings Organization Clock Calculator Composer Voice memo 2ed level Application
<View finder>
Phone Phone modes Display Calls Security Network T9 input Reset settings Photos Pictures Sounds Record voice Memory status
<Game list>
Homepage Favorites WAP push 5 Camera 6 Settings 7 My data 8 Games Browser 9 Note: Alternatively, you may press the number keys to access any menu in Main menu screen. For example, press 6 in Main menu to access Settings. Icons Your phone has one 65536-colour main LCD and one monochrome external LCD. The icons displayed on the two screens are explained below. Main screen No. 1 Indicator Signal strength 2 External screen Description No signal Signal strength 20%
Signal strength 40%
Signal strength 60%
Signal strength 80%
Maximum signal strength Press and hold End key. Press SOS and Yes. Press Menu > Phonebook >Lists Scroll to the desired entry. Press Send key. Enter the Record no. by using the keypad keys. Press # key to request the phone number from the phonebook. Press Send key. Enter a phone number (including the area codes if necessary) using keypad keys. Press Send key to dial the number. Press End key to end the call. Basic Phone Use Making an Emergency call You can make an emergency call when your SIM card is not inserted. To make an emergency call (Steps 1-2):
1. 2. Making/Ending a call Before you can make a call, you need to insert your SIM card and make sure your phone is powered on. To make/end a call (Step 1-3):
1. 2. 3. Alternatively, you may select a contact from phonebook and press Send key to dial the number. To make a call from phonebook (Step 1-3):
1. 2. 3. To quick dial a number (Step 1-3):
1. 2. 3. To dial a number from the Dialled Calls (Step 1-3) 1. 2. 3. Receiving/Rejecting a call When there is an incoming call, the phone rings/vibrates (depending on your phone mode) and the screen displays the name (if recorded in your phonebook) or phone number of the caller (This feature in network-dependent). To receive a call, press Send key or Reply. To reject a call, press End key or Reject. Holding a call During a call, you may put your first call on hold. To place a call on hold:
1. Note: Note that y our phone automatically puts your first call on hold when you receive a second call or dial a second call. Making/Receiving a second call During a call, your phone automatically puts your first call on hold when you receive a second call or dial a second call. To make a second call (Steps 1-3):
1. 2. Note: When you press Send key, the first call will automatically be put on hold. 3. Press Swap to switch between two calls. Making a conference call During a call, press Main menu to select a number from Phonebook or enter the number using keypad keys. Press Send key to make the second call. Press Send key from the standby screen. Scroll to the desired number. Press Send key. Press Hold. Also press Main menu and select Hold. Press Main menu> Conference to connect two calls. Press Main menu > Private to disconnect two calls. When you have one active call and one call on hold, you may connect the two calls for a conference call. To make a conference call (Step 1-2):
1. 2. Receiving a third call To receive a third call, while you have one call on hold and the other active, receiving the third call will end the active call and replace with the newly received one. Otherwise, you may receive a third call when you have the first two calls connected (using Conference feature). Text Entry This section describes how you enter text by using your keypad keys. The entry method is applied to all the edit screens in your phone. Changing entry mode In an edit screen, an indicator displays the currently applied entry mode. Also there is a word counter beside the indicator, telling you how many characters you have entered. To turn on/off T9 entry, press and hold # key. To change entry mode: press * key to switch among the following modes:
T9 Entry Method T9 abc T9 Abc T9 ABC 123 Normal entry method abc Abc ABC 123 Press Menu > Settings > T9 input > T9 language. Scroll to the desired language. Press Select. T9 Language Your phone supports a number of T9 language. To select a T9 language (Step 1-3):
1. 2. 3. To turn on/ off T9 preferred (Step 1-2):
1. Press Menu > Settings > T9 input > T9 preferred. 2. Press Change. T9 English entry method Your phone supports T9 text input. It is a smart function to deduce the possible word combination by searching the T9 dictionary. Below is an example. To enter cat in your edit screen:
1. 2. 3. 4. Other key functions:
1. 2. 3. 4. 5. Normal entry method To enter cat in your edit screen:
1. 2. 0 : enter the word and add a space behind it. Right Softkey: delete the letter on the left of the cursor. Left Softkey: Open Options menu or go to the next possible T9 word combination.
* key: short press to open the symbol chart; long press to turn on/off T9 entry mode.
# key: press to switch between entry mode (upper or lower case). Press 228 using keypad keys. Act appears on the screen. Press Left Softkey to go to the next possible combination such as cat, bat, abu, cau, etc. Stop pressing Left Softkey when cat appears on the screen. Press to add the word or press 0 to enter the word and add a space behind. Press 2 three times to jump to c. Press 2 once to jump to a. Press 8 once to jump to t. To enter 1 and other symbols: ; / @ : ? ! . , From Standby screen, long press to call the voicemail. To enter 2, a, b, c, , , , A, B, C, To enter 3, d, e, f, , , D, E, F, To enter 4, g, h, i, G, H, I To enter 5, j, k, l, J, K, L To enter 6, m, n, o, , , , M, N, O, , (N~) To enter 7, p, q, r, s, P, Q, R, S, To enter 8, t, u, v, , , , , T, U, V, , , , , To enter 9, w, x, y, z, W, X, Y, Z To enter 0 or a space. From the standby screen, long press to enter + and display the +List. Long press to turn on/off T9 text entry; short press to open the symbol chart. Short press to switch between different entry method: ABC, Abc, abc or 123. 3. Numeric entry method Press the numeric keys to enter the number. Character table Numeric keys have different functions under different entry method. Please refer to the following table for details. 1 2 3 4 5 6 7 8 9 0
Message Press Menu> Message >Create >SMS. Input your message. View: Display the message contents. Reply via SMS : Reply an SMS message to the sender (available for Inbox only). Reply via MMS: Reply an MMS message to the sender (available for Inbox only). Forward: Forward the message to other recipients (available for Inbox only). Detail: Display the date, time and senders information (available for Inbox/View mode only). Edit: Edit the message (available for Draft/Outbox only). Delete: Delete the selected message. Delete all: Delete all the messages in the current folder. Message provides SMS/MMS messaging service. You can send SMS message of up to 160 characters, including punctuation marks and spaces. The messages that you created, sent and received are stored in the Draft, Outbox and Inbox. When you navigate through the message list in Inbox, Outbox and Draft, press Options to access the following features:
1 2 3 4 5 6 7 8 The following icons are used to display information about messages:
Creating/Sending/Saving SMS Messages To create a new message (Step 1-4):
1. 2. 3. When done, press Options >Send. 4. Or press Options >Save to store in Draft. For more information on entry method, see Text entry on page XX. SMS message edit options In SMS edit screen, press Options to access the following features:
1 2 3 4 5 6 SMS setting To access SMS setting, press Menu > Message > SMS settings. The following describes the setting items for SMS settings:
1 2 3 Send: Send the message. Save: Store the message in Draft. Insert object: Insert objects such as Predefined sounds/animation, and Own animations/pictures/sounds. Format: Select Text format and Text colour for the message. Predefined text: Your phone provides 10 predefined texts. You may select one to add to your message. Insert number: You may select a number from Phonebook and add it to your message. Service center: Edit your SMS Messages centre number. Messages type: Select your message type from Standard text/Fax/ X.400/Paging/E-mail/ERMES/Voice mail. Validity period: Select the period from 1 hour/12 hours/1 day/1 week/Maximum. It decides the duration that the SMS message is stored in SMS centre when trying to deliver the message. The selected one will have its radio button marked. Status report: This feature allows you to get a receipt when the SMS message is successfully delivered. Press Select to activate the feature and the check box is marked. This feature is network dependent. Direct reply: Press Select to activate the feature, and the check box is marked. SMS via GPRS: Press Select to activate the feature, and the check box is marked. 4 5 6 Memory status To check how much SIM/phone memory space is used and left, press Menu > Message > Memory status. Creating/Sending/Saving MMS Messages To create a new message (Step 1-4):
1. Press Menu> Message >Create >MMS. Press Insert to add objects to your MMS message. Send: Send the message. Save: Store the message in Draft. View details: select to view the message information (Slide timing and message size). Page timing: Set the page timing. Preview Page: Preview the selected page. Preview msg: Preview the MMS message. 2. 3. When done, press Options >Send. 4. Or press Options >Save to store in Draft. MMS message edit options In MMS edit screen, press Options to access the following features:
7 8 9 10 11 12 MMS message insert featuer In MMS edit screen, press Insert to insert files such as pictures, text, photos, sounds, voices, and a page. MMS setting To access MMS setting, press Menu > Message > MMS settings. The following describes the setting items for MMS settings:
7 8 Memory status To check how much MMS memory space is used and left, press Menu > Message > Memory status. Predefined Text Your phone provides 10 predefined text so that you can add to your message edit screen. To add a predefined text (step 1-2):
1. 2. Cell Broadcast Broadcast messages are network dependent. You need to register from your service provider. To access this feature, press Menu >
Message > Cell broadcast. Under the menu, you can set up the following settings:
1 2 3 Send options: Under the menu, you may adjust settings such as Delivery report, Own address, Life time, and Priority. Receive options: Under this menu, you may adjust settings such as Normal, Anonymous sender or Advertisements. Messages list: display a list of received cell broadcast messages. Broadcast: Press Select to activate the feature and the check box is marked. Topic list: You can add a number of topics for your list. You can enter at least five entries using the channel number (ID) and if required, the name itself. Auto display: This feature allows automatic display for cell broadcast messages to be displayed in standby mode. Press Select to activate the feature and the check box is marked. CB languages: This feature allows you to specify the language in which your cell broadcast message is displayed. Press Menu > Message > Predefined Text. Press Options > Select. 5 Note: When cell broadcast service is activated, the phone operating time will be reduced. 4 Phonebook Complete (a list of all the numbers stored in the other phonebooks(Phone, SIM, FDN, except SDN numbers) Contacts in SIM Contacts in your phone memory (Phone) Own number Service dialing numbers (SDN) Fixed dialing numbers (FDN) Groups Voice mailbox The phone book is used to store names, phone numbers, and other personal details. There are two storage areas: the SIM card and the phones own memory. Your phone has 8 different contacts phonebooks:
1 2 3 4 5 6 7 8 To access phonebook lists, press Menu > Phonebook > Lists. Alternatively, press > from the standby screen. To scroll to a desired phone directory, press < or >. The name and icon of the directory display on the top of the screen. Service Dialing Numbers (SDN) SDN phonebook supplies numbers that are installed by your service provider, which cannot by edited or changed by you. The SDN number is hidden, and your phone only displays their text title. Note: Although your phone supports SDN, it is usable only on SIM, Please contact your service provider. Fixed Dialing Numbers (FDN) This feature allows to limit the dialing out numbers. If the feature is set to be ON, you may only make calls from FDN phonebook and emergency numbers. Note: Although your phone supports SDN, it is usable only on SIM, Please contact your service provider. Adding Entries You may add entries to your phonebook, except SDN and FDN directories. To add an entry (Steps 1-6):
1. 2. 3. 4. 5. 6. Managing the phonebook You can search through your phone book to call, modify, copy or delete entries. Searching the phonebook Alphabetic search To search a contact alphabetically (Steps1-6):
1. 2. 3. Press Menu > Phonebook > Lists or press > from the standby screen. Press < or > to scroll to the desired directory. Select <add new>. Press Select to choose SIM or Phone memory. Enter the information. Press Save. Press Menu > Phonebook > Lists or press > from the standby screen. Press < or > to scroll to the desired directory. Press a number key corresponding to the first letter of the contacts name. (i.e. Press 3 twice to access the contact names that starts with E). Press up or down to scroll to the desired contact. Press Call key to call the number. 4. 5. Search by group To search a contact according to the Group it is assigned to (steps 1-6):
Press Menu > Phonebook > Lists or press > from the standby screen. From the standby screen, enter a Record no.. Press # key to access the contacts number in the phonebook. Press Call key to call the number. Press Menu > Phonebook > Lists or press > from the standby screen. Press < or > to scroll to Groups. Scroll to the desired group (Friends, Colleagues, Family, Biz partner, and VIP). Press Options > View group. Press up or down to scroll to the desired contact. Press Call key to call the number. 1. 2. 3. 4. 5. 6. Search by Record no. To search a phone number by its corresponding Record no. (Steps 1-3):
1. 2. 3. Alternatively, 1. 2. Go to a desired entry. 3. 4. 5. Editing an entry The edit function enables any stored phone number to be edited and have additional information/attributes added to the number. To access the Options menu (Steps 1-3):
6. 7. 8. 9. 10. Press Save. The SIM entry includes the following information:
1. 2. 3. Press Menu > Phonebook > Lists or press > from the standby screen. Scroll to a desired contact. Press Options > Edit. Press up or down to the desired field and add information. Press Options > Go to location. Enter Record no.. Press OK. Name: Enter a name for the contact. Home number: Enter a phone number. (You need to at least input the number to save a contact). Location: Select between SIM, Protected SIM, or Phone. You will have to enter your PIN2 code when you select Protected SIM as the location before you store the record. Record no.: The phone will assign a number for the contact. Or you may select one by pressing < or >. Name: Enter a name for the contact. Home/Office/Mobile/Fax number Email 1/Email 2 Other information: Notes, Company, Street, Post code, Country, City, and URL. Group: There are six groups (No group, Friends, Colleagues, Family, Biz partner, and VIP). Caller picture/ringtone: Set a picture or ringtone for the contact. 4. The phone entry includes the following details:
1 2 3 4 5 6 Deleting entries There are two options for deleting information from your phonebooks:
Delete each entry individually. Delete all your phone book entries at once. Deleting an entry To delete an entry (steps 1-4):
1. Press Menu > Phonebook > Lists or press > from the standby screen. 2. Scroll to Complete, SIM or Phone directory. 3. Press Options > Delete. 4. Press Select. Press Menu > Phonebook > Lists or press > from the standby screen. Select an entry from Phone. Press Options > Edit. Press up or down to scroll to the Group field. Press < or > to scroll to the desired group name. Press Save. Press Menu > Phonebook > Lists or press > from the standby screen. Press < or > to scroll to Groups. Press up or down to scroll to the desired group name. Press Options > Rename Group. Enter a new name. Press OK. Deleting all entries To delete all entries (steps 1-4):
1. Press Menu > Phonebook > Lists or press > from the standby screen. 2. Scroll to SIM or Phone directory. 3. Press Options > Delete all. 4. Press Select. Grouping entries It can be a good idea to sort your entries into groups for easier access. There are 6 groups available to allocate phone numbers to (including No group). Note that only entries stored in the phones memory can be categorized to different group. Creating a group name To change the group names (Step 1-6):
1. 2. 3. 4. 5. 6. Add a contact to a group To add a phone contact to a group (Steps 1-6):
1. 2. 3. 4. 5. 6. Ungroup a phone number or remove all entries from the group To remove a contact from the allocated group (Steps 1-4):
Press Menu > Phonebook > Lists or press > from the standby screen. 1. Select an entry from Phone. 2. Press Options> Edit. 3. 4. Scroll to Group field. 5. Select <No group>. To remove all contacts from the allocated group (Steps 1-4):
1. 2. 3. 4. Press Save. Change a group image To change the group image (Step 1-4):
1. 2. 3. 4. Press Select. Assign a ringtone/melody to a group To assign a specific ringtone/melody stored in your phone to a group (Steps 1-4):
1. Press Menu > Phonebook > Lists or press > from the standby screen. Select an entry from Phone. Press Options> Remove entries. Press Menu > Phonebook > Lists or press > from the standby screen. Select an entry from Phone. Press Options> Group image. Press Menu > Phonebook > Lists or press > from the standby screen. Select an entry from Phone. Press Options> Set ringtone. Press Menu > Phonebook > Lists or press > from the standby screen. Select an entry from Phone. Press Options> Copy (all) to phone or Copy (all) to SIM. Press Select., Press Menu > Phonebook > Lists or press > from the standby screen. Select an entry from Phone. Press Options> Move to phone or Move to SIM. Press Select. Press Menu > Phonebook > Lists or press > from the standby screen. Press < or > to select Own number. Select <Empty> and then Edit. Enter your Own number and Name. Press Save. 2. 3. 4. Press up and down and confirm by pressing Select. Moving from phone to SIM / SIM to phone To move a phonebook entry in SIM to Phone or Phone to SIM:
1. 2. 3. 4. Copy (all) from phone to SIM/SIM to phone To copy a phonebook entry or all phonebook entries in SIM to Phone or Phone to SIM 1. 2. 3. 4. Own number Own number menu allows you to store and display your Own number. To add your Own number (Steps 1-4):
1. 2. 3. 4. 5. Voice mail Voice mail is a network-dependent feature that enables you to retrieve recorded messages from people who have called your number when you were out of coverage, if you are on the call and did not activate Call waiting, or had your phone switched off. Setting up your Voice mailbox To set up your voice mailbox (Step 1-5):
1. Press Menu > Phonebook > Lists or press > from the standby screen. 2. Press < or > to select Voice mailbox. 3. Select Number. 4. Enter your voice mail service center number. 5. Press Save. Calling your voice mailbox To call your voice mailbox (Steps 1-5):
1. Press Menu > Phonebook > Lists or press > from the standby screen. 2. Press < or > to select Voice mailbox directory. 3. Press up or down to select Voice mailbox. 4. Press End key to end the call. Changing your voice mailbox number To change your voice mailbox number (Steps 1-5):
1. Press Menu > Phonebook > Lists or press > from the standby screen. 2. Press < or > to select Voice mailbox. 3. Select Number. 4. Change your voice mail service center number. 5. Press Save. Call Options Press Menu > Call options Press up or down to access a call list. Or press 1 for Dialled calls, 2 for Missed calls and 3 for Received calls. Name of the caller (if it was stored in your Phonebook) Phone number Time of the call Call duration This option provides three lists of call history, including Dialled calls, Missed calls, and Received calls. There is also a record of time/cost of calls and a charge setting feature. Dailled Calls To access Dailled calls, press Menu > Call Options > Dialled calls. Alternatively, you may press the Call key to display a list of previously dialled calls. Call Lists Three call lists details the following information for each call:
There is a total of three call lists in your phone:
1. Dialled calls 2. Missed calls 3. Received calls To access the three call lists (Step 1-2):
1. 2. Alternatively, press Send key from the standby screen and < or > to scroll to the desired call list. In the call list press Options to access the following features:
1. 2. 3. 4. Time & Charge This feature keeps a record of the duration and cost of all types of call you made or received in your phone. To view the time and cost information (Step 1-3):
1. 2. 3. Charge Settings This feature allows you to set a limit in units so that your phone can no longer be dialled once the limit is reached. Note that this feature is SIM and Network dependent. To set the charge limit (Step 1-5):
1. 2. 3. 4. 5. Press Menu > Call options > Charge settings. Select Currency to set the unit price for each call. Enter your PIN 2 before you make a change. Select Cost/unit to set the cost Per unit and Per min.. Enter your PIN 2 before you make a change. Select A/c limit to edit Display credit and Max cost. Enter your PIN 2 before you make a change. Select to turn on/off Auto display. Press Select to activate the feature and the check box is marked. Press Menu > Call options > Time/Charge. Press up or down to select the desired call types (Last call, All voice calls, Total incoming, Total outgoing, and Cost left). Press OK to return or press Reset in Last call and All voice calls list if you would like to reset the call counter. Extract number: Show the phone number and store it to the phonebook. Copy to :Copy the phone number from SIM/Phone to Phone/SIM. Delete: Delete the number. Delete all: Delete the call history. Applications Press Menu > Applications > Organization > Scheduler. Press Options > Week. Note that the Month format is the default display. Press Menu > Applications > Organization > Scheduler. Press Options > Agenda > <Add new>. Fill in the appointment details. Press Save. Organization (including Scheduler, ToDo list, and Notepad) Clock (including Alarm clock, Auto off, Auto on, Countdown, and Stopwatch) Calculator (including Calculator and Currency converter) Composer Voice memo (including Record and Play voice and Data rate) Type: Select the event type (Memo, Call, and Meeting mode) Description: Add more description about the event Status: Select to Activate/Deactivate the event Reoccurrence: Set the event frequency (Once, Daily, Weekly, Month, and Annual) Start date/ time: Set the events starting date and time. End date/ time: Set the events ending date and time. Press Menu > Applications to access this menu, which allows you to access the following features:
Scheduler Scheduler allows you to record an appointment in your phone and remind you later when it is the appointment time. Note that even if the phone is turned off, the phone will automatically turns on and alert you of the appointment if the Agenda is set to be on. To set the calendar display format (Step 1-2):
1. 2. To set up an appointment (Steps 1-5):
1. 2. 3. 4. Agenda information includes:
Note: If you missed an appointment, there will be an icon on the screen. Press on the Right Softkey to check the details. Options for an existing menu include:
ToDO List This feature allows you to set up reminders and appointment for a certain time or date. To set up an event in ToDo list (Steps 1-5):
1. 2. 3. 4. Entry information includes:
Note: If you missed an appointment, there will be an icon on the screen. Press on the Right Softkey to check the details. Type: Select the event type (Memo, Call, and Meeting mode) Description: Add more description about the event Status: Select to Activate/Deactivate the event Reoccurrence: Set the event frequency (Once, Daily, Weekly, Month, and Annual) Start date/ time: Set the events starting date and time. End date/ time: Set the events ending date and time. View: To view the details of the event. Edit: To edit the event. Add new: Create a new event. Delete: Delete the event. Delete all: Delete all events. Capacity: Check the Maximum and Free memory. Press Menu > Applications > Organization > ToDo list. Select <Add new>. Fill in the entry details. Press Save. Press Menu > Applications > Organization > Notepad. Select <Add new>. Save: Store the new entry. Insert new line: Insert a new line to the entry screen. Clear text: Clear the written text. Send: Send the entry. View: To view the details of the event. Edit: To edit the event. Add new: Create a new event. Delete: Delete the event. Delete all: Delete all events. Capacity: Check the Maximum and Free memory. Press Menu > Applications > Organization > Clock > Alarm clock. Press up or down to select an empty alarm profile. Press Options > Edit. Set alarm details. Press Save. Options for an existing event include:
Notepad This feature allows you to write down some text for later reference. To use the Notepad (Steps 1-4):
1. 2. 3. Write down information. Press Select > Save. 4. Options for Notepad include:
Alarm Clock If an alarm is set, it rings even if the phone is turned off. To set an alarm (Steps 1-5):
1. 2. 3. 4. 5. Options for an alarm profile:
Auto Off If the feature is set to be on, the phone automatically turns off at a specific time. Press Menu > Applications > Organization > Clock >
Auto off. Press Select to activate the feature and the check box is marked. Auto On If the feature is set to be on, the phone automatically turns on at a specific time. Press Menu > Applications > Organization > Clock >
Auto on. Press Select to activate the feature and the check box is marked. Countdown This feature allows you to set a specific time duration and count down from the defined time. To start counting down (Steps 1-5):
1. 2. 3. 4. 5. Stopwatch This feature allows you to record two sets of timings. Press Menu > Applications > Organization > Clock > Countdown. Press Set to enter a period of time. Press OK to confirm. Press Start to begin countdown. Press Stop to stop countdown. Activate: Turn on/off the alert tone Edit: Edit the profile details (Time, Week of the day, Status, Description) Delete: Delete the existing profile. Delete all: Delete all alarm profiles. Press Menu > Applications > Calculator > Calculator. Enter digits with numeric keys and other calculation keys (refer above). Press End key to return to the standby screen. Up key: Addition Down key: Multiplication Right key: Division Left key: Subtraction Right Softkey: Clear Left Softkey: Equeals to (=)
# key: Decimal point (.)
* key: Negative (-) Press Menu > Applications > Organization > Clock > Stopwatch. Press Start. Press Stop to record one set of timing and Stop 1 to record the first set of timing. Press Stop 2 to record the second set of timing. Press Resset to reset the time counter. To record the timing with Stopwatch (Steps 1-5):
1. 2. 3. 4. 5. Calculator You can perform calculation like what you normally do with a calculator. This calculator can be input a maximum of 8 digits, display a 9 digit result and 6 decimal places. If the calculation result exceeds 9 digits, the screen displays a message of Over range. Calculation keys 1. 2. 3. 4. 5. 6. 7. 8. To perform calculation (Steps 1-3):
1. 2. 3. Currency Converter This function allows you to exchange rates between two currencies. To exchange rate (Steps 1-5):
1. 2. 3. 4. 5. Composer This function allows you to create your own sound by composing one main track and three sub tracks. Composer keys 1. 2. 3. 4. To compose a melody (step 1-5):
1. 2. 3. 4. 5. Voice memo This function allows you to record a voice (up to 50 seconds) by using your phone's microphone. The voice file can be attached to an MMS message and send to others. To record voice (Steps 1-6):
1. 2. 3. Press Menu > Applications > Calculator > Currency conv. > Rate setting. Enter the rate. Press Compute and Save to return to Currency conv. menu screen. Select Rate compute. Enter a number and press Convert. Press Menu > Applications > Composer. Press Options > Comoser .to select a sound file. Scroll to the desired track and press Select. Compose the melody. Press Options to Save/Play the melody or change Instrument/Tempo. Number keys 1-7: C, D, E, F, G, A, B notes. Up or down key: Move the composed melody one note up or down.
* key: Increase/Decrease the rest/length of notes.
# key: Raise/lower the note by a semitone. Press Menu > Applications > Voice memo > Record. Press Record to start recording. Press Stop/Pause to cease/hold the recording. Name the sound file on Rename screen. Press Save. Send as MMS: Send the recorded voice as an MMS attachment. Rename: Rename the file. Delete: Delete the file. Delete all: Delete all the files. Info: Details are File names, Creation time, File type, and File size. 4. When done, press Save to save the sound. 5. 6. To access Record voice options menu, press Menu > Applications > Voice memo > Play. Options include:
Data rate The lower the data rate, the longer the sound file can be recorded. To set the data rate (steps 1-4):
1. 2. 3. Press Menu > Applications > Voice memo > Data rate. Scroll to the desired value. Press Select and the selected one will have its radio button marked. Camera Your phone has an integrated camera that allows you to take pictures and send as MMS. The pictures are taken and saved in JPG format, which can be viewed by most of the picture viewing programs. Note: Do not apply force to your cameras lens; otherwise it might be damaged. To take a picture (Steps 1-4):
1. 2. 3. 4. Note: Note that you might violate the privacy law if you take a picture of others and send as MMS without their consent. While you are on the cameras view finder screen, you may apply the following two features:
Press Menu > Camera or press center key to launch camera. Press Center key to take the picture. Press Save to store the picture. Press Back to go back to the cameras view finder screen. Zoom: Press Up key to zoom in and press down key to zoom out. The function is not available when the image size is 640x480. If the image size is 320x240, you may zoom once, and 160x120, zoom twice. Brightness: Press < or > to adjust the level of brightness on the cameras view finder screen.
Options for cameras view finder screen include:
Twilight: This feature allows the phone to increase the exposure time if there is insufficient light when you are taking a picture. Press Select to turn on/off the feature. Close up: You phone allows you to take a close up picture if the feature is set to be on. Photo size: Select your photo size. There are VGA (640x480), QVGA (320x240), and QQVGA (160x120). The larger the photo size, the more memory space it takes. Brightness: Adjust he photo's brightness level. Image quality: Select the photo's image quality (Fine, Normal, and Economy) Effect: Select a different color for your photo (Normal, Monochrome, Sepia, and Bluish) Flicker control: When taking a picture under fluorescent light, flicker may occur. This feature allows you prevent the flicker situation by selecting a flicker control value (50Hz or 60Hz). Help: Directions guide you how to use shortcut functions. Default setting: Restore your options menu settings to default value.
Note: The phone will return to the standby screen after three minutes of idling in camera mode. Options for saved picture include:
View finder: Select to return to the cameras view finder. Send as MMS: Send the stored picture as an MMS. Set as wallpaper: Set the stored picture as the wallpaper. Go to my photos: Go to the folders where the taken pictures are saved. Settings Press Menu > Settings > Phone > Voice volume. Press Up or > key to increase the volume. Press Down or < key to decrease the volume. Press OK to confirm. Press Menu > Settings > Phone > Minute reminder. Select On/Off to activate/deactivate the reminder. Select Timer to enter duration by minute. Press Save. You may customize your phone by changing the following setting options. Voice Volume To change voice volume (Steps 1-4):
1. 2. 3. 4. Answer Options To access Answer Options, press Menu > Settings > Phone > Answer options. There are three answer settings:
Any key answer: If the feature is activated, you can answer an incoming call by pressing any keypad keys except the End key. Fold answer: If the feature is activated, you can answer an incoming call when you unfold the phone. Ring silencer: if the feature is activated, your phone is turned to the silent mode. Minute Reminder This feature allows you to set a reminder to notice you how long you have talked on the phone by minute. To set a reminder (Steps 1-4):
1. 2. 3. 4. Time/Date This feature allows you to set time and date information. To set a time zone (Steps 1-3):
1. 2. 3. 4. 5. To set date/time (Steps 1-4):
1. 2. 3. 4. To set Time format (Steps 1-s):
1. 2. 3. To set date format (Step 1-3):
1. 2. 3. FAK setting FAK (Fest Access Keys) is a shortcut function, allowing you to access major functions of the phone by press the key. Press Menu > Settings > Phone > Time/date > Set timezone. Press up or down to navigate through the time zone map. Press Select to confirm the time zone. Press Yes to confirm if there is Daylight saving. Press OK to Set the city to local. Press Menu > Settings > Phone > Time/date > Set date/time. Scroll to Date and press Edit. Scroll to Time and press Edit. Press Save. Press Menu > Settings > Phone > Time/date > Set date format. Scroll to DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DD, or YYYY/MM/DD. Press Select. Press Menu > Settings > Phone > Time/date > Set time format. Scroll to 12 hour or 24 hour. Press Select. Press Menu > Settings > Phone modes or press up key from the standby screen. Scroll to the desired mode. Press Options > Activate (Before you activate a phone mode, you may press Options >Change settings to customize it). Press OK. Ringer setting (On/Off) Ringer (for Any call/Phonebook call/Alarm/Messages/Friends/Colleagues/Family/Biz partner/VIP) Ringer volume (for Any call/Phonebook call/Alarm/Messages/Friends/Colleagues/Family/Biz partner/VIP) Key tone (On/Off) Info tones (for Warning tone/Cell broadcast/Message sent) Vibrator (On/Off) Earphone setting (Earphone & Speaker/Earphone) Illumination (Off/LCD only/Key & LCD) Press Menu > Settings > Phone > FAK setting. Press Select to choose from Shortcut 2- 7. Scroll to a desired feature. Press OK. Press Menu > Settings > Phone > Language. Press Select to choose a language. Press OK. To set a fast access key (Steps 1-4):
1. 2. 3. 4. Language To set a language for your phone (Steps 1-3):
1. 2. 3. Phone Modes There are four phone modes:
1. Normal mode 2. Meeting mode Pocket mode 3. 4. Car mode To select a phone mode (Steps 1-4):
1. 2. 3. 4. Settings for a phone modes menu include:
Ringer setting To change the ringer setting (Steps 1-3):
1. 2. 3. Ringer To set a ringer for different type of calls (Step 1-6):
1. 2. 3. 4. 5. 6. Ringer volume To adjust the ringer volume (Steps 1-6):
1. 2. 3. 4. Press Menu > Settings > Phone modes. Press Options > Change settings > Ringer. Scroll to a type of call. Press Select to open Sounds screen. Scroll to a desired sound file. Press Select. Press Menu > Settings > Phone modes. Press Options > Change settings > Ringer volume. Scroll to a type of call. Press Select. Press Menu > Settings > Phone modes. Press Options > Change settings > Ringer setting. Press Select. The option is marked if it is activated. Press up/down to increase/decrease the volume. Press OK. Press Menu > Settings > Phone modes. Press Options > Change settings > Vibrator. Press Select. The option is marked if it is activated. Press Menu > Settings > Phone modes. Press Options > Change settings > Key tone. Press Select. The option is marked if it is activated. Press Menu > Settings > Phone modes. Press Options > Change settings > Info tone > the desired tone type. Press Select. The option is marked if it is activated. Press Menu > Settings > Phone modes. Press Options > Change settings > Earphone setting > the desired earphone setting. Press Select. The option is marked if it is activated. 5. 6. Key tone To change the key tone (Steps 1-3):
1. 2. 3. Info tones There are three types of info tones (Warning tone, Cell broadcast and Message sent). To change the Info tones status (Steps 1-3):
1. 2. 3. Vibrator To change the vibrator setting (Steps 1-3):
1. 2. 3. Earphone setting There are two modes for earphone setting: Earphone & Speaker and Earphone. To change the earphone setting (Steps 1-5):
1. 2. 3. Illumination To change the illumination setting (Steps 1-3):
Press Menu > Settings > Phone modes. 1. Press Options > Change settings > illumination > the desired setting. 2. 3. Press Select. The option is marked if it is activated. Greetings This feature provides a text greeting when the phone is powered on. There are two types of power on greetings: no greeting or text greeting. To set a text greeting (Steps 1-4):
1. 2. 3. Write down text. 4. Note: To deactivate text greeting, press Clear on edit screen. Wallpaper You may select an image from Photos/Pictures folder and set it as a background image for the standby screen. To set a wallpaper (Steps 1-4):
1. 2. 3. 4. To set a wallpaper style (Steps 1-3):
1. 2. 3. Press Menu > Settings > Display > Wallpaper > Set wallpaper. Press Select to choose a file folder (Picture/ Photo). Scroll to a desired image file. Press Select. Press Menu > Settings > Display > Wallpaper > Style. Scroll to a desired style (Fit to screen/ Tile/ Best fit/ Centre) Press Select. Press Menu > Settings > Display > Greetings Press Select to open the edit screen. Press OK. The text greeting is activated. Press Menu > Settings > Display > Brightness. Scroll to a desired level (Low/Medium/High/Max) Press Select. Press Menu > Settings > Display > Animation. Scroll between Animation 1 and Animation 2. Press Select to confirm. Press Menu > Settings > Display > 2ed-LCD. Scroll to the desired mode (Normal mode/ Clock mode). Press Select. The option is marked if it is activated. Colour style To set a different color style for your phone (Steps 1-3):
1. Press Menu > Settings > Display > Colour style. Scroll from Theme 1-4. 2. 3. Press Select to confirm. Animation To select an animation for your phone (Steps 1-3):
1. 2. 3. Brightness To adjust the phone's brightness level (Steps 1-3):
1. 2. 3. 2ed-LCD To set the screen display mode for the second display screen (Steps 1-3):
1. 2. 3. Calls The calls screen provides four settings: Call diversion, Call waiting, Auto redial, and Withhold ID. Call diversion To divert a call (Steps 1-4):
1. 2. 3. Types of calls for diversion include:
To check the phone's call diversion status, press Menu > Settings > Calls > Call Diversion > Status check. To cancel all the diversion settings, press Menu > Settings > Calls > Call Diversion > Cancel all. Press Yes to confirm cancellation. Call waiting This feature allows you to answer a second call when you are on the first call. This feature is subscription independent. Please contact your service provider. To activate Call waiting (Steps 1-3):
1. 2. 3. To check Call waiting status (Steps 1-3):
1. 2. 3. Diver for all calls (divert all the incoming calls to the number you assigned) Not reachable (divert all the incoming calls to the number you assigned when the phone is turned off or out of signal range). No reply (divert an incoming call if the call is not answered for a period of time determined by your network) Busy (divert the incoming call if the line is busy. Receiving fax (divert the incoming call if the phone is receiving a fax) Receiving data (divert the incoming call if the phone is receiving data)\
Press Menu > Settings > Calls > Call Diversion. Scroll to a type of call you would like to divert. Press Select. Press Menu > Settings > Call waiting. Scroll to Active. Press Select. Press Menu > Settings > Call waiting. Scroll to Check status. Press OK. Press Menu > Settings > Call > Auto redial. Press Select. The option is marked if it is activated. Press Menu > Settings > Call waiting. Scroll to Active. Press Select. Press Menu > Settings > Calls > Withhold ID. Press Select. The phone asks if you would like to withhold your ID. Press Yes. PIN code (a protection code if your SIM is stolen. It is provided by your network) PIN 2 code (a protection code for charging information and FDN service) PUK/PUK 2 code (Unblocking codes in case you forget your PIN/PIN2 codes) Phone code (provided by the phone) To cancel Call waiting (Steps 1-3):
1. 2. 3. Auto redial This feature allows you to redial a number for up to 10 times. To turn on Auto redial (Steps 1-2):
1. 2. Withhold ID This feature allows you to withhold your ID when you are calling to others. To withhold your ID (Steps 1-3):
1. 2. 3. Security Security menu provides settings preventing your phone from unauthorized use. Before you may change any security settings, your phone will ask you to enter the following codes:
Change PIN/PIN2 You are requested to enter your PIN when the phone is powered on. However, this feature can be turned off, which might risk your phone for unauthorized use if it is stolen or lost. Before you can change your PIN codes, you need to activate PIN codes. To activate PIN (Steps 1-3):
1. 2. 3. To change PIN/PIN2/phone code (Steps 1-5):
1. 2. 3. 4. 5. Phone lock This feature allows you to lock your SIM card, preventing from unauthorized use. If this feature is set to be ON, you need to enter your PIN code to access SIM data. 1. 2. 3. Bar calls This feature allows you to bar different types of calls made or received in your phone. Ask your service provider for a 4-digit password if you want to activate the feature. There are four types of calls for barring service. 1. 2. 3. 4. All outgoing (except emergency calls) Outgoing international (only calls within the home country can be dialed) Outgoing international except home (Calls made to your home country is allowed while making an international call is barred) All incoming (barring all the incoming calls) Press Menu > Settings > Security > Code > Change PIN/ Change PIN 2/ Chg. Phone code. Key in the current code. Key in the new code. Enter the new code again. Press OK. To set your phone lock (Steps 1-4):
Press Menu > Settings > Security > Phone lock. Press Select. The option is marked if it is activated. Press Menu > Settings > Security > PIN active. Enter your PIN. Press OK. When roaming (barring the incoming calls when you are out of your home network range) Press Menu > Settings > Security > Bar calls. Press Select to choose a type of Bar calls. Press Options > Check status. Press OK. Press Menu > Settings > Security > Bar calls. Press Select to choose a type of Bar calls. Press Options > Set. Enter your Bar password. Press OK. Press Menu > Settings > Security > Bar calls. Press Select to choose a type of Bar calls. Press Options > Clear. Enter your Bar password. Press OK. Press Menu > Settings > Security > Fixed dialing. Enter PIN 2 code. A screen displays a message if activating/deactivating the feature. Press OK. 5. To bar a call (Steps 1-5):
1. 2. 3. 4. 5. To check call barring status (Step 1-3):
1. 2. 3. 4. To cancel call barring (Steps 1-5):
1. 2. 3. 4. 5. Fixed dialing Fixed dialing only allows you to dial certain numbers that are predefined. To turn on Fix dialing (Steps 1-3):
1. 2. 3. Network Network menu provides the following settings. Network info To select a network you want to connect to (Steps 1-3):
1. 2. 3. Choose network 1. 2. 3. Auto network This feature allows you to search the network automatically. To activate Auto network (Steps 1-2):
1. 2. Pref. network This feature allows a list of your preferred network. You may view, edit and delete a network from the list. To create a Pref. network (Steps 1-5):
1. 2. 3. 4. 5. To delete a Pre. network (Steps 1-4):
1. 2. 3. Press Menu > Settings > Network > Pre. network. Press List. Press Options > Insert/ add to end. Press Options to select a network. Press OK. Press Menu > Settings > Network > Change network. Press Select. A message asks if you would like to change network. Press Yes. Press Menu > Settings > Network > Pre. network. Press List. Press Options > Delete. Press Menu > Settings > Network > Network info. Scroll to the desired network Press Select. Press Menu > Settings > Net work > Auto network. Press Select. Press OK. Press Menu > Settings > Network > GPRS info. Press Reset. A message displays asking you to confirm resetting. Press Yes. Press Menu > Settings > Network > Connectivity. Scroll to the desired profile. Press Select. Press Activate. Press Menu > Settings > Network > Band. Scroll to the desired band (900 MHz, 1800 MHz, 1900 MHz, 900/1800 MHz, and 900/1900 MHz). Press Select. The option is marked if it is activated. 4. Band To select a network band (Steps 1-3):
1. 2. 3. Connectivity To select a network connection type (Steps 1-4):
1. 2. 3. 4. GPRS info This features displays the time and size of data that have been transmitted through your phones GPRS frequency. To view/reset the GPRS info (Steps 1-3):
1. 2. 3. Transfer rate To select a suitable data transfer rate (Steps 1-3):
1. 2. 3. T9 input Please refer to Text input on page XX. Reset settings This feature allow you to restore your phone settings to default values. Executing Reset settings will not reset data in My data, Messages and Phonebook menu. To restore your phone settings (Steps 1-2):
1. 2. Note: You may be asked to enter your security code to reset settings if you have set security code beforehand. Press Menu > Settings > Network > Transfer rate. Scroll to a desired transfer rate (115.2 Kb/s, 57.6 Kb/s, 38.4Kb/s, and 19.2Kb/s). Press Select. Press Menu > Settings > Reset settings. Press Yes. My data Press Menu > My data > Pictures/Photos. Scroll to the desired file. Press Options > View. You can save image, sound, and recorded voice in My data. This feature allows you to manage files in your phone. To access My data, press Menu > My data or press down key from the standby screen. Note that if your phone memory is full, you may not be able to rename the files. Pictures/ Photos The Pictures and Photos folders allow you to manage the downloaded pictures and photos taken in your phone. You can send them as MMS message to other recipients. To view Pictures/Photos (Steps 1-3):
1. 2. 3. Options for Photos/Pictures include:
View: View the selected file.
Send as MMS: Send the file as MMS message.
Set as wallpaper: Set the file as the standby screen wallpaper. Rename: Rename the file.
Delete: Delete the file.
Delete all: Delete all the files.
Info: Display the File name, Resolution, Bit depth, Creation time, File type, and File size.
Sounds The Sounds folder stores ringtones and recorded voice (for details, please see "Record Voice). To set a sound as a ringtone (Steps 1-5):
1. Press Menu > My data > Sounds. Scroll to a desired sound profile. 2. Press Options > Set as ringtone. 3. Select a ringer type. 4. 5. Press OK. To view the sound file details (Steps 1-5:
Press Menu > My data > Sounds. 1. Scroll to a desired sound profile. 2. Press Options > Info. 3. 4. Press Back. The Info screen details include the following items:
Record Voice To record voice (Steps 1-4):
Press Menu > Applications > Voice memo > Record. 1. Press Select > Record. 2. Press Stop to cease recording. 3. Press Save to opent he Rename screen. 4. Enter a file name. 5. 6. Press Save. The recorded file is stored in Sounds file under My data. To view a list of recorded voice files, press Menu > My data > Record Voice. Options for Recorded voice menu include:
File name Creation time File type File size Send as MMS Rename Delete Delete all Info
Memory status To check the memory space in your phone (Steps 1-2):
Press Menu > My data > Memory status. Press Back. Games Press Menu > Games. Scroll to the desired game name. Press Select. Press Options > New. Your phone provides a number of games for your entertainment. To play a game (Steps 1-5):
1. 2. 3. 4. Options for a game include:
New: Start a new game Edit: Edit game settings (Sounds and Silent alert) Level: Select the difficulty level of a game Top score: View the highest score of a game Instructions: Description about how to play a game Browser Press Menu > Settings > Network > Connectivity. Scroll to a desired network service provider. Press Options > Activate. Your phone provides WAP service, enabling you to get the latest information from the website to your phone. To use the WAP service, you need to apply WAP service from your service provider and set up your WAP settings in your phone. When you are connected to the WAP browser, the phone will display the predefined starting browser page. The available menu options depend on the webpage you connect to. To end the connection, press End key. WAP Setup To select WAP connection profiles (Step 1-3):
1. 2. 3. Profile Settings include the following items:
1. 2. 3. 4. 5. 6. Server address: Scroll to WAP and MMS to enter addresses. IP address: Scroll to WAP and MMS to enter addresses. Port number: Scroll to WAP and MMS to enter the port number. Linger time: Set a period of time before the network connect ends. Connection mode: Scroll to WAP and MMS to select the connection mode. CSD settings: Select WAP/MMS/JAVA under CSD settings to change the following details.
GPRS settings: Select WAP/MMS/JAVA under GPRS settings to change the following details.
Connect type (Analog or ISDN) Dial-up number (Enter the ISP number) User name (Enter your user name or login name) Password APN (Enter your service provider address) Authentication User name Password 7. WAP page connection You may select to connect to WAP page in the following two ways. To connect to Homepage, press Menu > Browser > Homepage. Or you may select to connect to a previously saved URL by pressing Menu > Browser > Favorites > the desired bookmark. WAP push The feature allows you to select a message receipt from your service provider. To set WAP push (Steps 1-4):
1. 2. 3. 4. Press Menu > Browser > WAP push. Select Switch off to deactivate. Select Service centre only and input details. Press Save.
This product uses the FCC Data API but is not endorsed or certified by the FCC