| submitted | available | document details (if available) | source link |
|---|---|---|---|
| July 06 2010 | April 12 2010 | RTL8192 datasheet John Russell Acrobat Distiller 7.0 (Windows) |
| various | User Manual | Users Manual | 205.45 KiB | July 06 2010 / April 12 2010 |
RTL8192CE PCI-Express miniCard Users Manual Rev. 1.0 11 Feb 2010 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.tw RTL8192CE Users Manual COPYRIGHT 2010 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp. DISCLAIMER Realtek provides this document as is, without warranty of any kind, neither expressed nor implied, including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors. TRADEMARKS Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are trademarks/registered trademarks of their respective owners. USING THIS DOCUMENT This document is intended for the software engineers reference and provides detailed programming information. Though every effort has been made to ensure that this document is current and accurate, more information may have become available subsequent to the production of this guide. In that event, please contact your Realtek representative for additional information that may help in the development process. ii Rev.1.0 Table of Contents RTL8192CE Users Manual 1. GENERAL DESCRIPTION................................................................................................................................................4 2. GENERAL FEATURES ......................................................................................................................................................5 3. PRODUCT SPECIFICATIONS..........................................................................................................................................7 3.1. MINI PCI EXPRESS PIN ASSIGNMENT..............................................................................................................................7 3.2. MECHANICAL..................................................................................................................................................................8 3.3. ENVIRONMENTAL ............................................................................................................................................................8 3.3.1. Operating ...............................................................................................................................................................8 Storage....................................................................................................................................................................8 3.3.2. FUNCTIONAL SPECIFICATIONS .........................................................................................................................................8 3.4. 3.5. WARNING ........................................................................................................................................................................9 4.5.1 Federal Communication Commission Interference Statement ......................................................................................9 4.5.2 INDUSTRY CANADA STATEMENT................................................................................11 4.5.3 NCC ...........................................................................................................................................................12 TABLE 1. MINI PCI EXPRESS PIN ASSIGNMENT ............................................................................................................................7 TABLE 2. FUNCTIONAL SPECIFICATIONS .......................................................................................................................................8 List of Tables List of Figures FIGURE 2. RTL8192CE MINICARD MECHANICAL SPECIFICATION................................................................................................8 iii Rev.1.0 1. General Description RTL8192CE Users Manual The Realtek RTL8192CE miniCard is a highly integrated MIMO wireless LAN (WLAN) used for high speed wireless local network access. The card is built with a MAC and 2T2R capable RF/baseband single chip RTL8192CE. The RTL8192CE miniCard implements multiple input, multiple output (MIMO) orthogonal frequency division multiplexing (OFDM) with 2 transmit and 2 receive paths and is compatible with 802.11n Draft specification 2.0. Other features include two spatial streams transmission, Long guard interval (GI) of 800ns, spatial spreading, and transmission over 20 MHz and 40 MHz bandwidth. Moreover, RTL8192CE provides one spatial stream space-time block code (STBC) to extend the range of transmission. At the receiver, extended range and good minimum sensitivity is achieved by having receiver diversity up to 2 antennas. As the recipient, the RTL8192CE miniCard also supports explicit sounding packet feedback that helps senders with beamforming capability. For legacy compatibility, direct sequence spread spectrum (DSSS), complementary code keying (CCK) and OFDM baseband processing are included to support all 802.11b, and 802.11g data rates. Differential phase shift keying modulation schemes, DBPSK and DQPSK with data scrambling capability, are available along with complementary code keying to provide the data rates of 1, 2, 5.5 and 11Mbps with long or short preamble. The high speed FFT/IFFT paths, combined with BPSK, QPSK, 16QAM, and 64QAM modulation of the individual subcarriers and rate compatible punctured convolutional coding with coding rate of 1/2, 2/3, 3/4, and 5/6, provides the maximum data rate of 54 Mbps and 300 Mbps for IEEE 802.11g and 802.11n MIMO OFDM respectively. The RTL8192CE PCI-E miniCard supports 802.11e for multimedia applications, 802.11i for security, and 802.11n for enhanced MAC protocol efficiency. Using packet aggregation techniques such as A-MPDU with BA and A-MSDU, protocol efficiency is significantly improved. Power saving mechanisms such as U-APSD, APSD, and MIMO power saving reduces the power wasted during idle time, and compensates for the extra power required to transmit MIMO OFDM. The RTL8192CE PCI-E miniCard provides simple legacy and 20Mhz/40Mhz co-existence mechanisms to ensure backward and network compatibility. 4 Rev.1.0 RTL8192CE Users Manual Complies with PCI Express Base Specification Revision 1.1 IEEE standards support: IEEE 802.11b, 802.11g, draft 802.11n Mini PCI Express interface Enterprise level security which can apply WPA2 certification 2 transmitter and 2 receivers allow data rates supporting up to 300 Mbps downstream and 300 Mbps Full-featured software utility for easy configuration and management Power savings features and low power consumptions for mobile powered applications Rohs compliance 2. General Features General Operate at ISM frequency bands (2.4GHz) upstream PHY rates. Host Interface Standards supported MAC Features MIMO power saving mechanism Multiple BSSID feature allowing RTL8192CE to assume multiple MAC identity when used as wireless bridge IEEE 802.11b/g/n compatible WLAN 802.11e QoS Enhancement (WMM, WMM-SA Client mode) 802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services. Cisco Compatible Extensions (CCX4)CCX Frame aggregation increase MAC efficiency (A-MSDU, A-MPDU) Low latency Immediate High-Throughput Block Acknowledgement (HT-BA) Long NAV for media reservation with CF-End for NAV release PHY-level spoofing to enhance legacy compatibility Supports Wake-On-WLAN via Magic Packet and wake-up frame TXOP SIFS bursting guarantees multimedia bandwidth. Channel management and co-existence 5 Rev.1.0 RTL8192CE Users Manual IEEE 802.11n draft 2.0 MIMO OFDM PHY Features
- 2 transmitter and 2 receivers (2T2R).
- 20MHz and 40MHz bandwidth transmission.
- Long Guard Interval (800ns).
- 1 spatial stream STBC transmission for extended coverage.
- Sounding packet. DSSS with DBPSK and DQPSK, CCK modulations with long and short preamble. OFDM with BPSK, QPSK, 16QAM, 64QAM, and 256QAM modulations. Convolutional coding rate:
1/2, 2/3, 3/4, and 5/6. Maximum data rate 54Mbps in 802.11g and 300Mbps in 802.11n. OFDM receive diversity with MRC using up to 4 receive paths. Switch diversity used for DSSS/CCK. Hardware antenna diversity. probability of clipping. Selectable digital transmit and receiver FIR filters Programmable scaling in transmitter and receiver to trade quantization noise against increasing Fast receiver automatic gain control (AGC). 6 Rev.1.0 3. Product specifications 3.1. Mini PCI Express Pin Assignment Table 1. Mini PCI Express Pin Assignment RTL8192CE Users Manual PIN# Pin Name 1 WAKE#
3 RESERVED 5 RESERVED 7 CLKREQ#
9 GND 11 REFCLK+
13 REFCLK-
15 GND 17 RESERVED 19 RESERVED 21 GND 23 PERn0 25 PERp0 27 GND 29 GND 31 PETn0 33 PETp0 35 GND 37 RESERVED 39 RESERVED 41 RESERVED 43 RESERVED 45 RESERVED 47 RESERVED 49 RESERVED 51 RESERVED YES NC NC YES YES YES YES YES NC NC YES YES YES YES YES YES YES YES NC NC NC NC NC NC NC NC PIN# Pin Name 2 3.3V 4 GND 6 1.5V 8 RESERVED 10 RESERVED 12 RESERVED 14 RESERVED 16 RESERVED 18 GND 20 W_DISABLE#
22 PERST#
24 +3.3Vaux 26 GND 28 +1.5V 30 SMB_CLK 32 SMB_DATA 34 GND 36 USB_D-
38 USB_D+
40 GND 42 LED_WWAN#
44 LED_WLAN#
46 LED_WPAN#
48 +1.5V 50 GND 52 +3.3V YES YES NC NC NC NC NC NC YES YES YES YES YES NC NC NC YES NC NC YES NC YES NC NC YES YES 7 Rev.1.0 3.2. Mechanical RTL8192CE Users Manual Figure 1. RTL8192CE miniCard Mechanical Specification 3.3. Environmental 3.3.1. Operating Operating Temperature:
Relative Humidity:
3.3.2. Storage Temperature:
Relevant Humidity:
0 to 70 C 5-90% (non-condensing)
-55 to 125 C 5-95% (non-condensing) 3.4. Functional Specifications POWER SUPPLY MODULATION TYPE Table 2. Functional Specifications DC 3.3V +/- 0.3V from host equipment CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM MODULATION Technology DSSS, OFDM 8 Rev.1.0 RTL8192CE Users Manual 802.11b: 11 / 5.5 / 2 / 1Mbps 802.11g: 54 / 48 / 36 / 24 / 18 / 12 / 9 / 6Mbps Draft 802.11n (20MHz, 800ns GI): 130 / 117 / 104 / 78 / 65 / 58.5
/ 52 / 39 / 26 / 19.5 / 13 / 6.5Mbps Draft 802.11n (40MHz, 800ns GI): 270 / 243 / 216 / 162 /135 /
121.5 / 108 / 81 / 54 / 40.5 / 27 / 13.5Mbps Draft 802.11n (20MHz, 400ns GI): 144.4 / 130 / 115.6 / 86.7 /
72.2 / 65 / 57.8 / 43.3 / 28.9 / 21.7 / 14.4 / 7.2Mbps Draft 802.11n (40MHz, 400ns GI): 300 / 270 / 240 / 180 / 150 /
135 / 120 / 90 / 60 / 45 / 30 / 15Mbps 2400MHz ~ 2483.5MHz 11 for 802.11b, 802.11g, draft 802.11n (20MHz) 7 for draft 802.11n (40MHz) Transfer rate FREQUENCY Range NUMBER OF CHANNEL 3.5. Warning 4.5.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 9 Rev.1.0 RTL8192CE Users Manual This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users, and The transmitter module may not be co-located with any other transmitter or antenna, For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: TX2-RTL8192CE. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 3.95 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication. 10 Rev.1.0 RTL8192CE Users Manual IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 4.5.2 Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 3.95dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. As long as conduction above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). The antenna must be installed such that 20 cm is maintained between the antenna and users. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. 11 Rev.1.0 RTL8192CE Users Manual End Product Labeling The final end product must be labeled in a visible area with the following: Contains TX IC :
6317A-RTL8192CE. Manual Information That Must be Included The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove. This RF module in the users manual of the end product which integrates this module. The users manual for OEM Integrators must include the following information in a prominent location IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 4.5.3 NCC ID Realtek Semiconductor Corp. Headquarters No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu, 300, Taiwan, R.O.C. Tel: 886-3-5780211 Fax: 886-3-5776047 www.realtek.com.tw 12 Rev.1.0
This product uses the FCC Data API but is not endorsed or certified by the FCC