submitted | available | document details (if available) | source link |
---|---|---|---|
October 11 2013 |
various | User manual Installation | Users Manual | 618.48 KiB | / October 11 2013 |
RTL8192EENF RTL8192EEBT Combo module Installation Rev. 1.0 28 Jan 2013 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.tw 1 Rev.1.0 Installing the Wireless PCIe miniCard module Hardware Step 1. Shut down the computer. Step 2. Installing PCIe MiniCard module to PCIe MiniCard connector. Step 3. Connect two external Wi-Fi antennas on I-PEX connectors. step4. Power on the computer. Un-installing the Wireless PCIe MiniCard module Hardware Step 1. Shut down the computer. Step 2. Remove 2 external Wi-Fi Antennas from the Wireless PCIe MiniCard module board. 2 Rev.1.0 Step 3. Remove the Wireless PCIe MiniCard module board from PCIe MiniCard connector port. Step 4. Power on the computer. Installing the Wireless PCIe miniCard module Software Before you proceed with the installation, please notice following descriptions. Note1: The following installation was operated under Windows XP.
(Procedures are similar for Windows 98SE/Me/2000.) Note2: If you have installed the WLAN driver & utility before, please uninstall the old version first. If you install the Realtek11n Single Chip PCIE WLAN NIC Mass production kit into your laptop computer before installing the software program from 3 Rev.1.0 the CD. A. Insert the Installation CD to your CD-ROM Drive. Execute the setup program. B. Click Next to process the installation C. The system starts to install the software of the WLAN adapter. D. The system will automatically detect the card and display Hardware 4 Rev.1.0 Installation screen. Click to continue. E. Please click Finish to complete the installation. 5 Rev.1.0 Un-installing the Wireless PCIe MiniCard module Software If you install Realtek11n Single Chip PCIE WLAN NIC Mass production kit into your laptop computer after installing the software program from the CD. When you install Realtek11n Single Chip WLAN PCIE MINICARD Adapter, the following dialog will be shown. A. Uninstall the RTL8192EEBT WLAN Driver from Start All Programs Realtek11n Single Chip WLAN PCIE NIC Mass production kit or Control PanelChange or Remove Programs. Please click Un-install (or Change/Remove) to remove RTL8192EEBT WLAN driver. B. Please click Finish to complete the un-installation Installing the Bluetooth USB Module Software A. Insert the mini-card into system connector. B. Boot on system then the RT Bluetooth Radio device will show up in device manager. 6 Rev.1.0 C. Click right button on RT Bluetooth Radio and select Update Driver. D. After select Update Driver then the Hardware Update Wizard will pop up, please select No, not this time and press Next button. 7 Rev.1.0 E. After step D please Select Install from a list or specific location and press Next button. 8 Rev.1.0 F. Finish step E then select Dont search, I will choose the driver to install and press Next button. G. Finish step F then we have to choose Hardware type, please choose Show All Devices and press Next button. 9 Rev.1.0 H. Now select browse to find the driver for device.
(The drivers locate is the same with WiFi driver ) 10 Rev.1.0 I. Press Finish button to complete the install process and you can see the Driver will be show up in Device Manager. Realtek Semiconductor Corp. Headquarters No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu, 300, Taiwan, R.O.C. Tel: 886-3-5780211 Fax: 886-3-5776047 www.realtek.com.tw 11 Rev.1.0
This product uses the FCC Data API but is not endorsed or certified by the FCC