| submitted | available | document details (if available) | source link |
|---|---|---|---|
| March 01 2013 | March 07 2013 | Microsoft® Word 2010 |
| various | user manual | Users Manual | 335.22 KiB | March 01 2013 / March 07 2013 |
RTL8812AE Half Mini-Card Users Manual Rev. 1.0 29 November 2012 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.tw COPYRIGHT RTL8812AE Half Mini-Card User Manual 2012 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp. DISCLAIMER Realtek provides this document as is, without warranty of any kind. Realtek may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors. TRADEMARKS Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are trademarks/registered trademarks of their respective owners. USING THIS DOCUMENT This document is intended for the software engineers reference and provides detailed programming information. Though every effort has been made to ensure that this document is current and accurate, more information may have become available subsequent to the production of this guide. ii Rev.1.0 RTL8812AE Half Mini-Card User Manual Table of Contents 1. GENERAL DESCRIPTION................................................................................................................................................ 1 2. FEATURES........................................................................................................................................................................... 1 3. PRODUCT SPECIFICATIONS.......................................................................................................................................... 3 3.1. ENVIRONMENTAL ............................................................................................................................................................. 3 3.1.1. Operating ............................................................................................................................................................... 3 3.1.2. Storage.................................................................................................................................................................... 3 FUNCTIONAL SPECIFICATIONS .......................................................................................................................................... 3 3.2. 3.3. WARNING......................................................................................................................................................................... 5 3.3.1 Federal Communication Commission Interference Statement ...................................................................................... 5 3.3.2 Industry Canada Statement .......................................................................................................................................... 6 3.3.3 NCC ..................................................................................................................................................................... 7 List of Tables TABLE 2. FUNCTIONAL SPECIFICATIONS ......................................................................................................................................... 3 iii Rev.1.0 1. General Description RTL8812AE Half Mini-Card User Manual The Realtek RTL8812AE is a highly integrated single-chip MIMO (Multiple In, Multiple Out) Wireless LAN
(WLAN) PCI Express network interface controller complying with the wireless very high throughput IEEE 802.11ac Draft 2.0 and high throughput 802.11n specification. The RTL8812AE provides a complete solution for a high-performance wireless client and also supports WiFi Direct feature that can easily build a WiFi P2P PAN network. The RTL8812AE baseband implements Multiple Input, Multiple Output (MIMO) Orthogonal Frequency Division Multiplexing (OFDM) with two transmit and two receive paths (2T2R). Features include two spatial stream transmissions, short Guard Interval (GI) of 400ns, spatial spreading, and support for 20MHz, 40MHz and 80MHz channel bandwidth. Moreover, RTL8812AE provides one spatial stream space-time block code
(STBC), Transmit Beamforming (TxBF) and Low Density Parity Check (LDPC) to extend the range of transmission. At the receiver, extended range and good minimum sensitivity is achieved by having receiver diversity up to 2 antennas. As the recipient, the RTL8812AE also supports explicit sounding packet feedback that helps senders with beamforming capability. With 2 independent RF blocks, the RTL8812AE can perform fast roaming without link interruption. For legacy compatibility, Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK) and OFDM baseband processing are included to support all IEEE 802.11b, 802.11g and 802.11a data rates. Differential phase shift keying modulation schemes, DBPSK and DQPSK with data scrambling capability are available, and CCK provides support for legacy data rates, with long or short preamble. The high speed FFT/IFFT paths, combined with BPSK, QPSK, 16QAM, 64QAM and 256QAM modulation of the individual subcarriers, and rate compatible coding rate of 1/2, 2/3, 3/4, and 5/6, provide up to 866.7Mbps for IEEE 802.11ac MIMO OFDM. The RTL8812AE builds in an enhanced signal detector, an adaptive frequency domain equalizer, and a soft-decision Viterbi decoder to alleviate severe multi-path effects and mutual interference in the reception of multiple streams. For better detection quality, receive diversity with Maximal-Ratio-Combine (MRC) applying up to two receive paths is implemented. Robust interference detection and suppression are provided to protect against Bluetooth, cordless phone, and microwave oven interference. Receive vector diversity for multi-stream application is implemented for efficient utilization of the MIMO channel. Efficient IQ-imbalance, DC offset, phase noise, frequency offset, and timing offset compensations are provided for the radio frequency front-end. Selectable digital transmit and receive FIR filters are provided to meet transmit spectrum mask requirements and to reject adjacent channel interference, respectively. The RTL8812AE supports fast receiver Automatic Gain Control (AGC) with synchronous and asynchronous control loops among antennas, antenna diversity functions, and adaptive transmit power control functions to obtain better performance in the analog portions of the transceiver. 1 Rev.1.0 RTL8812AE Half Mini-Card User Manual The RTL8812AE MAC supports 802.11e for multimedia applications, 802.11i and WAPI (Wireless Authentication Privacy Infrastructure) for security, and 802.11n/802.11ac Draft 2.0 for enhanced MAC protocol efficiency. Using packet aggregation techniques such as A-MPDU with BA and A-MSDU, protocol efficiency is significantly improved. Power saving mechanisms such as Legacy Power Save, U-APSD, and MIMO power saving reduce the power wasted during idle time, and compensate for the extra power required to transmit MIMO OFDM. The RTL8812AE provides simple legacy, 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility. 2 Rev.1.0 2. Features General QFN76 9x9mm package CMOS MAC, Baseband PHY and RF in a single chip for IEEE 802.11a/b/g/n/ac Draft 2.0 compatible WLAN RTL8812AE Half Mini-Card User Manual WAPI
(Wireless Authentication Privacy Infrastructure) certified. Cisco Compatible Extensions (CCX) for WLAN devices MAC Features 802.11ac MIMO solution for 5G band Frame aggregation for increased MAC Complete 802.11n MIMO solution for 2.4GHz and 5Ghz band 2x2 MIMO technology for extended reception efficiency (A-MSDU, A-MPDU) Low latency immediate High-Throughput Block Acknowledgement (HT-BA) robustness and exceptional throughput Long NAV for media reservation with CF-End Maximum PHY data rate up to 173.3 Mbps using 20MHz bandwidth, 400Mbps using 40MHz bandwidth, and 866.7Mbps using 80MHz bandwidth. Backward compatible with 802.11a/b/g devices while operating at 802.11n data rates Backward compatible with 802.11a/n devices while operating at 802.11ac data rates. Host Interface Complies with PCI Express Base Specification Revision 1.1 Standards Supported IEEE 802.11a/b/g/n/ac Draft 2.0 compatible WLAN IEEE 802.11e QoS Enhancement (WMM) IEEE 802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services IEEE 802.11h TPC, Spectrum Measurement IEEE 802.11k Radio Resource Measurement for NAV release PHY-level spoofing to enhance legacy compatibility MIMO power saving mechanism Channel management and co-existence Multiple BSSID the RTL8812AE-CG to assume multiple MAC identities when used as a wireless bridge feature allows Transmit Opportunity Short Inter-Frame Space (SIFS) bursting for higher multimedia bandwidth
(TXOP) WiFi Direct supports wireless peer to peer applications. Other Features Supports Wake-On-WLAN via Magic Packet and Wake-up frame Transmit Beamforming CCA on handshake. secondary through RTS/CTS Support TCP/UDP/IP checksum offload 1 Rev.1.0 Peripheral Interfaces Up to 12 General Purpose Input/Output pins Three configurable LED pins (mux with GPIO pins) Configurable Bluetooth Coexistence Interface
(mux with GPIO pins) Generates 40MHz clock for peripheral chip. Single external power source 3.3V only PHY Features IEEE 802.11ac MIMO OFDM IEEE 802.11n MIMO OFDM RTL8812AE Half Mini-Card User Manual OFDM with BPSK, QPSK, 16QAM, 64QAM and 256QAM modulation. Convolutional Coding Rate: 1/2, 2/3, 3/4, and 5/6 Maximum data rate 54Mbps in 802.11g, 300Mbps in 802.11n and 866.7Mbps in 802.11ac. OFDM receive diversity with MRC using up to 2 receive paths. Switch diversity used for DSSS/CCK Support STBC Support LDPC Hardware antenna diversity Selectable digital transmit and receiver FIR Two Transmit and Two Receive paths filters 5MHz / 10MHz / 20MHz / 40MHz / 80MHz bandwidth transmission Support 2.4Ghz and 5Ghz band channels Programmable scaling in transmitter and receiver to trade quantization noise against increased probability of clipping Fast receiver Automatic Gain Control (AGC) Short Guard Interval (400ns) Sounding packet. DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble On-chip ADC and DAC Build-in both 2.4GHz and 5GHz PA Build-in both 2.4GHz and 5GHz LNA 2 Rev.1.0 RTL8812AE Half Mini-Card User Manual 3. Product specifications 3.1. Environmental 3.1.1. Operating Operating Temperature:
Relative Humidity:
0 to 70 C 5-90% (non-condensing) 3.1.2. Storage Temperature:
Relevant Humidity:
-55 to 125 C 5-95% (non-condensing) 3.2. Functional Specifications Standards Bus Interface Form Factor Data Rate Media Access Control Modulation Techniques Network Architecture Table 1. Functional Specifications IEEE 802.11a/b/g/n/e/i/h/k/r/draft-ac PCI Express Half Size Mini Card 802.11b:
11, 5.5, 2, 1 Mbps;
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:
MCS 0 to 15 for HT20MHz;
MCS 0 to 15 for HT40MHz 802.11ac:
MCS 0 to 8 for HT20MHz;
MCS 0 to 9 for HT40MHz;
MCS 0 to 9 for HT80MHz CSMA/CA with ACK 802.11b:
CCK, DQPSK, DBPSK 802.11a/g/n:
64 QAM, 16 QAM, QPSK, BPSK 802.11ac:
256QAM, 64 QAM, 16 QAM, QPSK, BPSK WiFi:
Ad-hoc mode (Peer-to-Peer ) Infrastructure mode 3 Rev.1.0 RTL8812AE Half Mini-Card User Manual WiFi 2.4GHz:
11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan WiFi 5GHz:
20MHz band width :
Ch 36, 40, 44, 48, Ch 52, 56, 60, 64, Ch 100, 104, 108, 112, 116, 120, 124, 128,132,136, 140, Ch 149,153, 157,161, 165. 40MHz band width :
Ch 38, 46, Ch 54, 62, Ch 102, 110, 118, 126, 134, Ch 151, 159. 80MHz band width :
Ch 42 Ch 58 Ch 105, 122 Ch 155. 2.400GHz ~ 2.4835 GHz 5.1500GHz ~ 5.3500GHz 5.4700GHz ~ 5.7250GHz 5.7250GHz ~ 5.8500GHz WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i 3.3 V 9% I/O supply voltage Operating Channel Frequency Range Security Operating Voltage 4 Rev.1.0 3.3. Warning RTL8812AE Half Mini-Card User Manual 3.3.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. This device is intended only for OEM integrators under the following conditions:
1.)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2.)The transmitter module may not be co-located with any other transmitter or antenna, 3.)For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). 5 Rev.1.0 RTL8812AE Half Mini-Card User Manual IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: TX2-RTL8812AE. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. 3.3.2 Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 5dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna. 6 Rev.1.0 As long as conduction above is met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). The antenna must be installed such that 20 cm is maintained between the antenna and users. RTL8812AE Half Mini-Card User Manual IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: Contains IC :
6317A-RTL8812AE. Manual Information That Must be Included The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove. This RF module in the users manual of the end product which integrates this module. The users manual for OEM Integrators must include the following information in a prominent location IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements. The antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 3.3.3 NCC 5.25 ~ 5.35GHz Note:
1. 2. XXXyyyLPDzzzz-x (NCC ID) 7 Rev.1.0 RTL8812AE Half Mini-Card User Manual Realtek Semiconductor Corp. Headquarters No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu, 300, Taiwan, R.O.C. Tel: 886-3-5780211 Fax: 886-3-5776047 www.realtek.com.tw 8 Rev.1.0
This product uses the FCC Data API but is not endorsed or certified by the FCC