submitted | available | document details (if available) | source link |
---|---|---|---|
February 11 2018 | January 05 2019 | PRODUCT SPECIFICATION QOO Microsoft® Word 2010 |
various | Users Manual | Users Manual | 1.89 MiB | February 11 2018 / January 05 2019 |
RTL8822CE Users Manual
(Realtek RTL8822CE) Combo NGFF Type2230 Module Users Manual Preliminary Version 2018/10/09 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com RTL8822CE Users Manual CONTENT ENVIRONMENTAL .......................................................................................................................... 3 OPERATING ............................................................................................................................................ 3 STORAGE ................................................................................................................................................ 3 MTBF CACULATION .............................................................................................................................. 3 WARNING .......................................................................................................................................... 4 Federal Communication Commission Interference Statement ...................... 4 INDUSTRY CANADA STATEMENT ........................................................................................................... 6 NCC ...................................................................................................... 9 RTL8822CE Users Manual ENVIRONMENTAL Operating Operating Temperature: 0C to +70 C Relative Humidity:
5-90% (non-condensing) Storage Temperature:
-40C to +80C (non-operating) Relevant Humidity:
5-95% (non-condensing) MTBF caculation Over 150,000hours RTL8822CE Users Manual Warning Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. RTL8822CE Users Manual This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without C2P. 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH13 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX2-RTL8822CE ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Manual Information To the End User This module is intended for OEM integrator. The OEM integrator is responsible for RTL8822CE Users Manual the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. Industry Canada Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. This radio transmitter (RTL8822CE) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (RTL8822CE) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de RTL8822CE Users Manual l'metteur. Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector Gain (dBi) 2.4GHz 5GHz PSA RFDPA171320EMLB301 Dipole Antenna LYNwave ALA110-222050-300011 PIFA Antenna I-PEX I-PEX 3.14 3.5 5 5 1 2 Dynamic Frequency Selection (DFS) for devices operating in the bands 5250-
5350 MHz, 5470-5600 MHz and 5650-5725 MHz. Slection dynamique de frquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. For indoor use only. Pour une utilisation en intrieur uniquement. RTL8822CE Users Manual IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept RTL8822CE Users Manual any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following "
Contains IC: 6317A-RTL8822CE". The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or product packaging or product literature which shall be available with the end product or online. NCC 1. 2. XXXyyyLPDzzzz-x RTL8822CE Users Manual Installing the Wireless PCIe NGFF2230 module Hardware Installing PCIe NGFF2230 module to PCIe NGFF2230 connector and connect two external Wi-Fi antennas on I-PEX connectors. RTL8822CE Users Manual Un-installing the Wireless PCIe NGFF2230 module Hardware Remove 2 external Wi-Fi Antennas from the Wireless PCIe NGFF1630 module board and remove the Wireless PCIe NGFF2230 module board from PCIe NGFF2230 connector port RTL8822CE Users Manual Installing the Wireless PCIe NGFF2230 module Software Before you proceed with the installation, please notice following descriptions. Note1: The following installation was operated under Windows 7. Note2: If you have installed the WLAN driver & utility before, please uninstall the old version first. A. Execute the setup.exe, Click Next to process the installation B. Click Install to process the installation RTL8822CE Users Manual C. Click Install this driver software anyway D. After step C please press Next button. E. Please click YES to install BT package. RTL8822CE Users Manual F. Please click to continue. G. Please click to continue. RTL8822CE Users Manual H. Please click to start installation. I. Please click to finish the installation. RTL8822CE Users Manual J. Press Finish button to complete the install process Un-installing the Wireless PCIe NGFF2230 module Software A. Uninstall the RTL8822CE WLAN Driver from Start All Programs REALTEK 11ac 8822CE PCIE WLAN NIC Massproduction kit Please click Uninstall to remove RTL8822CE WLAN driver. RTL8822CE Users Manual Installing the Bluetooth USB Module Software A. Insert the NGFF2230 card into system connector. B. Boot on system then the Geniric Bluttooth Adapter device will show up in device manager. C. Click right button on RT Bluetooth Radio and select Update Driver. Page 18/22 RTL8822CE Users Manual D. After select Update Driver Software then the Hardware Update Wizard will pop up, please select Browse my computer for driver software and press Next button. E. After step D please Select Let me pick from a list of device drivers on my computer . Page 19/22 RTL8822CE Users Manual F. Finish step E then select Have Disk.. G. Now select browse to find the driver for device and press Next button.(The drivers locate is the same with WiFi driver ) Page 20/22 RTL8822CE Users Manual Page 21/22 RTL8822CE Users Manual H. Then click Install this driver software anyway to continue. I. Press close button to complete the install process and you can see the Driver will be show up in Device Manager. Page 22/22
This product uses the FCC Data API but is not endorsed or certified by the FCC