CT8101 DECT Handset User Manual

 

8212 DECT Handset OpenTouch Suite for MLE User Manual 8AL90328ENAAed00a 1551 R100 8212 DECT Handset 1 GETTING TO KNOW YOUR TELEPHONE 1.1 PHONE DESCRIPTION 1.1 STATUS ICONS 1.2 MENU ICONS 1.3 CALL ICONS 1.4 ACCESSING THE MENU AND NAVIGATING 2 GETTING STARTED INSTALLING THE BATTERY IN THE TELEPHONE 2.1 2.2 CHARGING YOUR TELEPHONE BATTERY 2.3 SWITCHING ON YOUR TELEPHONE 2.4 SWITCHING OFF YOUR TELEPHONE 3 USING YOUR TELEPHONE 3.1 MAKING A CALL 3.2 RECEIVING A CALL 3.3 CALLING FROM YOUR PERSONAL DIRECTORY 3.4 REDIALING THE LAST NUMBER DIALED (REDIAL) 3.5 CALL LOG 3.6 SENDING DTMF SIGNALS 3.7 MAKE A SECOND CALL 3.8 RECEIVING A SECOND CALL 3.9 SENDING A CALIBRATED CUT-OFF 3.10 LOCKING YOUR TELEPHONE 4 KEEP IN TOUCH 4.1 DEFINE THE NUMBER OF YOUR VOICE MAILBOX 4.2 CONSULTING YOUR VOICE MAILBOX 4.3 CONSULTING TEXT MESSAGES 4.4 SENDING A WRITTEN MESSAGE TO AN INTERNAL CONTACT 4.5 SEND PREDEFINED TEXT MESSAGES 4.6 CHANGE YOUR VOICE MAILBOX PASSWORD 5 PROGRAMMING YOUR TELEPHONE 5.1 PROGRAMMING YOUR PERSONAL DIRECTORY 5.2 ADJUSTING THE AUDIO FUNCTIONS 5.3 ADJUSTING YOUR TELEPHONE FUNCTIONS 5.4 SELECTING LANGUAGE 5 5 6 7 7 8 9 9 9 10 10 11 11 11 11 11 12 13 13 13 13 13 14 14 14 15 15 16 16 17 17 19 19 21 8AL90328ENAAed0a 2 /

29 8212 DECT Handset 6 REGISTERING THE TELEPHONE 6.1 REGISTERING THE TELEPHONE ON A SYSTEM FOR THE FIRST TIME 6.2 REGISTERING THE TELEPHONE ON OTHER SYSTEMS 7 ACCESSORIES 7.1 CHARGERS 7.2 CHARACTERISTICS OF THE MAINS POWER ADAPTER 7.3 PRESENTATION OF THE BATTERY PACK 7.4 HEADPHONE / EXTERNAL MICROPHONE 7.5 CLEANING YOUR TELEPHONE 7.6 TRANSPORTING AND PROTECTING YOUR TELEPHONE 8 DECLARATION OF COMPLIANCE 22 22 23 25 25 25 25 26 26 26 27 8AL90328ENAAed0a 3 /

29 8212 DECT Handset Operating conditions This approved DECT telephone is intended to be used with an ALE International cordless PABX. The following conditions must be respected, notably concerning the use of radioelectric frequencies:

Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. To limit the risk of interference, people with pacemakers must keep the wireless telephone away from their equipment (minimum distance of 15 cm/6 inches). It is recommended to follow the standard acceptance procedures before using this equipment in human safety critical areas (hospitals...). DECT equipment can only be used to establish links between fixed points if these links are temporary. The conditions of access to a DECT equipment telepoint network shall be stipulated by contract with the operator of the authorized telepoint network concerned. Do not expose your telephone to severe conditions (rain, sea air, dust, etc.). Switch off the telephone before changing the battery. You must not switch on or use your telephone near gas or inflammable liquids. The headset includes magnetic elements that may attract sharp metallic objects. There is a danger of explosion if the battery is replaced incorrectly. Use only recommended battery. The mains power socket used must be close to the charger/holder and easily accessible, so that it can be used as an 'on/off' facility. Battery charge: Charge the battery for about 6 hours before initial use. Use the following 82x2 DECT Handset charging units:

- 8212 DECT Handset Desktop charger With the following Power Supply Units:

- 8232 DECT Handset Desktop charger PSU Europe (3BN67335AA) TenPao (Model S005AYV0500100) Class VI (rating I/P:AC 100240V, 0.2A; O/P: DC 5V, 1A) Phihong (Model PSA05E050QH) Class V (rating I/P:AC 100240V, 0.2A; O/P: DC 5V, 1A) Friwo FW7713/XX Class V(rating I/P:AC 100240V, 150mA; O/P: DC 5V, 1A)

- 8232 DECT Handset Desktop charger PSU WW (3BN67336AA) TenPao (Model S008ACM0500100 with UK,US,AUS plugs) Class VI (rating I/P:AC 100240V, 0.3A; O/P:

DC 5V, 1A) Friwo FW7712 Class V (rating I/P:AC 100240V, 125mA; O/P: DC 5V, 0.9A) You can charge the device by connecting it to a USB 2.0 port (type A). To prevent possible hearing damage, do not listen at high volume levels for long periods. The labels and icons presented in this document are not contractually binding and may be modified without prior warning. The labels and icons displayed on your phone depend on the system to which you are connected and may differ from those specified in this document. 8AL90328ENAAed0a 4 /

29 8212 DECT Handset 1 Getting to know your telephone 1.1 Phone description Answer the call. Long press (feature depending on the system): redial last number or access the redial list. Hang up. Long press: switch on the phone / switch off the phone. Return to previous menu. Erase a character. Delete an entire field. Short press: back to homepage. Long press: lock/unlock keypad. Access MENU. Confirm. Navigate. Access your personal directory. In communication mode: activate/deactivate the mute feature. No feature is associated with this key in idle mode. In idle mode Short press: access the ringer adjustment feature. Long press: activate/deactivate ringer. Answering a call with loudspeaker activated. In communication mode: Activate/deactivate the loudspeaker. Switch off ringer. Long press: access the DTMF feature during a conversation. 8AL90328ENAAed0a 5 /

29 8212 DECT Handset LED Green steady: the phone is on the charger and the battery is fully charged. Red steady: the phone is on the charger and the battery is charging. Slow orange flashing: telephonic event such as unread message, missed call, etc. Rapid orange flashing: Incoming call. Red flashing: out of coverage. Flashing when the phone is plugged into the charger means the same as when the phone is not plugged into the charger. 3.5 mm jack plug for headset and maintenance. 1.1 Status icons The status icons are displayed on the welcome screen and indicate the status of the telephone. Battery charge level. Received messages voice mail and callback request texts and unanswered calls. Ringer active. Ringer disabled. Radio reception quality. Loudspeaker on (in conversation). Mute on (in conversation). Economy mode activated and used (green). Economy mode activated (gray). 50 mW power. You can obtain details on the status icons from the tooltips that appear on the welcome screen when you use the navigator:

8AL90328ENAAed0a 6 /

29 8212 DECT Handset 1.2 MENU icons The MENU is accessible from the welcome screen by pressing the OK key. It provides access to all the functions available on your system. All icons are described in their unselected state. When selected, the icons are displayed in a purple. Contacts:

Manage your personal directory and access the company directory. Call log:

Access the log of all incoming and outgoing calls. Messages:

Consult and send voice and text messages. Settings:

Access the general settings of the phone (key sound, economy mode, charger warning). Ring:

Ringing setting. 1.3 Call icons Making a call. Receiving a call. Accessing the directories. 8AL90328ENAAed0a 7 /

29 8212 DECT Handset 1.4 Accessing the MENU and navigating Access the menu. Press the Access menu key. Select a function in the MENU. Use the navigator keys and press the OK key to select a function. Navigating within a function. You can move vertically along the various labels within the function Press the OK key to validate your choice. OR You can move horizontally along the various icons within the function Press the OK key to validate your choice. 8AL90328ENAAed0a 8 /

29 8212 DECT Handset 2 Getting started In order to have a fully operational 8212 DECT Handset, make sure that you have the following items:

8212 DECT Handset. 2 rechargeable NiMH batteries AAA 600mAh 1,2V. A single charger. 2.1 Installing the battery in the telephone 2.1.1 Installing the battery in the telephone:

: Push the cover towards the back of the phone until the cover is unclipped.

: Lift up the cover. Using the plus (+) and minus (-) guides in compartment to insert the batteries in the proper direction. Insert the minus () end first and push to place the battery.

: Replace the cover.

: Push the cover until the it is clipped. 2.1.2 Removing the battery from the telephone

: Push the cover towards the back of the phone until the cover is unclipped.

: Lift up the cover. Remove the plus (+) end first to remove the battery. 2.2 Charging your telephone battery 2.2.1 Charging the battery on a single charger Put your phone on its support. Plug the USB cable into a 5V socket (AC/DC adaptor, computer, ). The AC/DC adaptor is not provided with the set. Please contact your provider for a recommended AC/DC adaptator. You can configure how the handset behaves when it is installed on the charger using the settings menu. Refer to the chapter on configuring your telephone. 8AL90328ENAAed0a 9 /

29 8212 DECT Handset 2.2.2 LED Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully charged. Red steady: the phone is on the charger and the battery is charging. Recharge your telephone battery regularly. The telephone can be on or off when recharging the battery. If the telephone is to remain unused or out of its charger for several weeks, remove the battery and store it separately. The battery charging time is less than 10 hours. 2.2.3 Autonomy of your telephone On standby in the radio coverage zone In continuous conversation Up to 75 hours 6 to 8 hours 2.3 Switching on your telephone Press the switch on/off key (long press). Your telephone is switched on. If the display fails to light up or the battery icon is flashing, recharge the battery. If the radio reception icon doesn t appear on the telephone display:

Check that you re in an area covered (if you re not, move close to a radio base station). Check that the telephone is properly installed in the system (consult the PABX manager). If the display indicates: 'Auto install ?', see paragraph 'Registering the telephone' or contact your installation technician. 2.4 Switching off your telephone Press the switch on/off key (long press). Confirm: Yes. Your telephone is switched off. 8AL90328ENAAed0a 10 /

29 8212 DECT Handset 3 Using your telephone 3.1 Making a call Dial. Send the call. You are in communication. Hang up. 3.2 Receiving a call You are receiving a call. Answer the call. Disabling the ringer: press the hang up key when your telephone rings: it is still possible to answer by pressing the off hook key. Hang up. Speak. 3.3 Calling from your personal directory Access MENU. Contacts Select the name of the person you wish to call. Send the call. 3.4 Redialing the last number dialed (redial) Long press Quick access:

8AL90328ENAAed0a 11 /

29 Quick access:

8212 DECT Handset 3.5 Call log Access MENU. Call log All calls. Incoming calls. Outgoing calls. Missed calls. Manage the call log Select an entry. Call Call the contact. View Display the log details. More o View details Display the log details. o Save contact If the contact is not in your local directory, you can save them as a new local contact. o Append to contact Add the number to an existing local contact. o Edit before call View the number before make the call. o Delete item Delete the selected item of the call log. Delete all items Delete the complete call log. 8AL90328ENAAed0a 12 /

29 8212 DECT Handset 3.6 Sending DTMF signals During a call, you sometimes have to send DTMF signals, for example, for a voice message service, an automatic switchboard or when remotely consulting an answering machine. To do this:

Long press the star key. Enter DTMF code. Long press the star key to exit DTMF mode. 3.7 Make a second call You are in conversation with one caller. Dial the number. The first call will be on hold as soon as the second callers number is dialed. Send the call. The first call is on hold. Recover the call on hold:

Hang up. Your telephone rings. Recover the call on hold. 3.8 Receiving a second call When you receive a second call during conversation, the name or number of the incoming call is displayed prefixed by 2=. To take the second call, you have to end the first conversation. 3.9 Sending a calibrated cut-off The calibrated cut-off activates functions such as transfer to another telephone set.To make a calibrated cut-off: Press the 0 key (hold down for a few seconds). 3.10 Locking your telephone This service enables you to prevent your phone being used. Long press. Unlock your terminal:

Long press. 8AL90328ENAAed0a 13 /

29 8212 DECT Handset 4 Keep in touch 4.1 Define the number of your voice mailbox Before starting initialization, make sure the administrator has created a voice mailbox. Access MENU. Messages Voicemail number Confirm. Enter the number of your voicemail. Confirm (or Save) 4.2 Consulting your voice mailbox When you have received a message, the Message icon is displayed on the welcome screen. The orange LED on your telephone flashes to indicate there is a message. OR Select the message icon in the notification area. The number of new vocal messages is displayed in the phone notification area. Access MENU. Messages Listen to voicemail Confirm access to the voice mail. Follow the instructions of the voice guide. Please refer to the administrator for your password. The message icon disappears once the message has been read. 8AL90328ENAAed0a 14 /

29 8212 DECT Handset 4.3 Consulting text messages When you have received a message, the Message icon is displayed on the welcome screen. The yellow LED on your telephone flashes to indicate there is a message. OR Select the message icon in the notification area. The number of new text messages is displayed. Access MENU. Messages Select the desired message. Confirm to read it. Read the message Confirm access to 'Options'. From the options menu, you can erase the message, callback the message sender, answer the message or read the next message. The message icon disappears once the message has been read. 4.4 Sending a written message to an internal contact Access MENU. Messages New message Confirm. 8AL90328ENAAed0a 15 /

29 8212 DECT Handset Complete the message. o Symbol: enter symbole. o Clear: delete the last entered character. Apply (or Send). Dial the number of your caller (dial, directories, last numbers dialed...). Confirm. When editing a message to be completed you can use the delete key to delete any entered characters. The browser lets you move the cursor in an input field. To key in the name: the keys in the numeric keypad include letters that you can display by pressing them successively. Example: press twice in succession on 8 to display the letter 'U'. To insert a pause in a number, press the 1 (hold down for a few seconds). To insert a measured break, press 0 (hold down for a few seconds). Press the # key to switch from lowercase letters mode to uppercase letters mode, and from uppercase letters mode to numbering mode. 4.5 Send predefined text messages Access MENU. Messages Select the desired message. Confirm. Dial the number of your caller (dial, directories, last numbers dialed...). Confirm. 4.6 Change your voice mailbox password Access MENU. Messages Listen to voicemail Confirm. Follow the instructions of the voice guide. Please contact your administrator for your initial voice mailbox password. 8AL90328ENAAed0a 16 /

29 8212 DECT Handset 5 Programming your telephone 5.1 Programming your personal directory Your directory can contain up to 12 numbers. Quick access:

Access MENU. Contacts 5.1.1 Add new contact More Add contact Apply. Name:

Enter the name (10 characters maximum). Apply. Select the type of contact Work: / Mobile: / Home:

Enter the number. Apply. Save Yes Return to idle. To key in the name: the keys in the numeric keypad include letters that you can display by pressing them successively. Example: press twice in succession on 8 to display the letter 'U'. To insert a pause in a number, press the 1 (hold down for a few seconds). To insert a measured break, press 0 (hold down for a few seconds). Press the # key to switch from lowercase letters mode to uppercase letters mode, and from uppercase letters mode to numbering mode. 8AL90328ENAAed0a 17 /

29 8212 DECT Handset 5.1.2 Modify a contact Select the record to be modified. Edit Select the record to be modified. Modify the name. Apply. Modify the number. Apply. Save Yes Return to idle. To delete a character, briefly press the delete key. To erase a field full of characters, hold down the erase key (long press). 5.1.3 Deleting a card Select the contact to delete. Apply. Delete contact Apply. Yes Return to idle. To delete all contacts, select: Delete all cont. 8AL90328ENAAed0a 18 /

29 8212 DECT Handset 5.2 Adjusting the audio functions 5.2.1 Choosing your melody:

Access MENU. Ring Off-site ringing / On-site ringing Apply. Select the melody of your choice (You can play/stop and select the ringtone). Apply. Return to idle. 5.2.2 Adjusting the ringer volume Access MENU. Ring Ring volume Apply. Increase / reduce the volume. Apply. Return to idle. Long press: activate/deactivate ringer. 5.3 Adjusting your telephone functions Access MENU. Ring Ring Activate or deactivate ringer. Keypad tone Activate or deactivate the keypad tone. Confirmation sound Activate or deactivate a signal when you confirm an action. Coverage warning Activate or deactivate the coverage warning. Charger warning Activate or deactivate a warning when the phone is charging. Low battery warning To activate or deactivate Bip emission when low battery level is reached. 8AL90328ENAAed0a 19 /

29 8212 DECT Handset Ascending ringing Activate or deactivate the ascending ringtone (Progressive ringing). Headset mode Activate or deactivate the headset mode. Apply. Return to idle. Access MENU. Settings. Time & date Define time and date format. ECONOMY mode Activate or deactivate the economy mode. When the economy mode is activated, the set adjusts its radio emission power according to the distance between the set and the radio base. The closer the set is to the radio base the lower the radio emission from the phone. This means that the phone is not always emitting at full power and thus saves the battery. Security To activate or deactivate a timeout to trigger the automatic keylock, change the keylock pin code or lock the function key. Handset name You can enter a name for your handset. Reset settings To reset the setting and go back to the default settings. Status To find out the software version of your phone. Auto answer To define how answer an incoming call: off hook key, any keys or automatic answer. Silent charging select whether silent mode is on or off when phone is charging. 2s key repeat For aided people the dial by name key repeat delay is increased when holding down the same key. Apply. Return to idle. The selection is retained even after switching the telephone on/off. The selection of a specific system

(SYSTEM...) forces operation on a specific system. This selection must be changed if one wishes to change system. Selecting 'Auto. select ' enables the telephone to connect automatically when it enters a system coverage zone. If the systems programmed in the telephone have common coverage zones, the telephone selects the first system found. 8AL90328ENAAed0a 20 /

29 8212 DECT Handset 5.4 Selecting language Access MENU. Settings Languages Select the language of your choice. Apply. Return to idle. 8AL90328ENAAed0a 21 /

29 8212 DECT Handset 6 Registering the telephone 6.1 Registering the telephone on a system for the first time For the mobile telephone to function, it must be registered on at least one ALE International or GAP system (registration operation).If when first switched on the display indicates: 'System 1 Auto install ?'

your telephone has not been registered on any system. Auto install?

Confirm. Registration can begin. A- If the system does not use an AC code. Launch subscription. B- If the system uses an AC (authentication code). Register Enter the PIN Code (The default is 0000). Apply. Select a system (It is recommended that the first empty system is selected). Apply. Enter PARK code (enter nothing if not mandatory). Apply. Enter access code (enter nothing if not mandatory). Apply. Select Power mode (You are advised not to select the 50 mW power mode unless required. The '50mW power mode' is intended for hazardous sites such as nuclear plants where it is requested that emissions do not exceed the maximum value.). Legacy mode Yes / No Call from crypted system to uncrypted system is accepted (yes) or rejected (no). The registration operation can last up to 2 minutes. If the operation has been done correctly (subscription accepted), the telephone is ready to be used and the radio reception quality icon is displayed. If the registration operation has not been successful, the station proposes launching the subscription again. 8AL90328ENAAed0a 22 /

29 8212 DECT Handset 6.2 Registering the telephone on other systems The telephone can be registered on several systems (maximum of 4). Note: the input is usually reserved for use with your main ALE International system. You can select the other inputs to register the telephone under another system (ALE International or other system). 6.2.1 To make a new registration, when the telephone has already been registered on one or more systems, proceed as follows:

1. Prepare your system for registration (see the system installation manual or consult your installation manager). 2. When the system is ready:

Access MENU. Install Register Enter the PIN Code. Apply. Select a system. Enter PARK code (enter nothing if not mandatory). Apply. Enter access code (enter nothing if not mandatory). Apply. Select Power mode. Legacy mode Yes / No Call from crypted system to uncrypted system is accepted (yes) or rejected (no). Launch subscription. Return to idle. If the registration operation runs correctly (Subscription accepted), the telephone is ready for use, and the radio coverage icon appears. If the registration operation has not been successful, the station proposes launching the subscription again. Depending on the type of system concerned, registration may require one or more additional operations on the system. 8AL90328ENAAed0a 23 /

29 8212 DECT Handset 6.2.2 Selecting your telephone system Your telephone can be programmed to function on 5 different DECT systems (ALE International or GAP). Access MENU. Install Select network Select the desired input (the chosen option is indicated by the radio button with a central dot). Return to idle. The selection is retained even after switching the telephone on/off. The selection of a specific system

(SYSTEM...) forces operation on a specific system. This selection must be changed if one wishes to change system. Selecting 'Auto. select ' enables the telephone to connect automatically when it enters a system coverage zone. If the systems programmed in the telephone have common coverage zones, the telephone selects the first system found. Other 8AL90328ENAAed0a 24 /

29 8212 DECT Handset 7 Accessories 7.1 Chargers A desk support for docking your phone with integrated USB cable. An AC/DC adapter made of a body and a separate plug head that clips onto the AC/DC adapator body. (not supplied with the phone, please contact your installation technician). 7.2 Characteristics of the mains power adapter Input: 100/240 V - 50/60 Hz. Output: 5V 1A. The mains power socket used must be close to the charger/holder and easily accessible, so that it can be used as an 'on/off' facility. Up to 75 hours 6 to 8 hours 7.3 Presentation of the battery pack 7.3.1 Autonomy of your telephone On standby in the radio coverage zone In continuous conversation 7.3.2 Initial charge:

Place the telephone in the charging holder. Battery icon flashing. The battery is charged. Maximum battery performance is only reached after around 10 charge/discharge cycles. These batteries contain polluting substances: do not dispose of them in a dustbin - take them to a specialized collection point. 8AL90328ENAAed0a 25 /

29 8212 DECT Handset 7.3.3 Battery charge level

> 66%

33% 66%

10% 33%

< 10%

7.4 Headphone / external microphone The side of the telephone features a 3.5 mm jack connector for headphone / external microphone. Contact your retailer for information on the various headphone models available. 7.5 Cleaning your telephone Your telephone does not require any particular servicing. However, it may be cleaned using a soft, damp cloth. Use appropriate soap or detergent to clean the surface of the telephone. 7.6 Transporting and protecting your telephone Your telephone can also be carried in a protective case wirh swivel clip

(not supplied with the phone, please contact your installation technician). It is recommended to use the protective case if your telephone is to be used in an industrial environment (presence of dust, filings, vapors of diverse origins and risk of being dropped). To avoid losing your telephone, get into the habit of clipping it onto your belt. 8AL90328ENAAed0a 26 /29 8212 DECT Handset 8 Declaration of compliance RegulatoryInformationUnitedStates InterferenceInformation ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevice mustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired operation. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalled andusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the user is encouraged to try to correct the interference by one or more of the following measures:

Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ModificationsnotexpresslyapprovedbyNECcouldvoidtheuser'sauthoritytooperate theequipment. Privacyofcommunicationsmaynotbeensuredwhenusingthisequipment. ExposuretoRadioFrequency(RF)Signals Thiswirelessphoneisaradiotransmitterandreceiver.Itisdesignedandmanufactured nottoexceedtheemissionlimitsforexposuretoradiofrequency(RF)energysetbythe FederalCommunicationsCommission(FCC)oftheU.S.Government.Theselimitsarepart ofcomprehensiveguidelinesandestablishpermittedlevelsofRFenergyforthegeneral population.TheguidelinesarebasedonthesafetystandardspreviouslysetbybothU.S. andinternationalstandardsbodies.Thesestandardsincludeasubstantialsafetymargin designedtoassurethesafetyofallpersons,regardlessofageandhealth.Thisdeviceand itsantennamustnotbecolocatedoroperatinginconjunctionwithanyotherantenna ortransmitter. 8AL90328ENAAed0a 27 /29 8 Declaration of compliance This product has been shown to be capable of compliance for localized specific absorptionrate(SAR)foruncontrolledenvironment/generalpopulationexposurelimits specified in ANSI/IEEE Std. C95.12005 and had been tested in accordance with the measurement IEEE15282013. HearingAidCompatibility(HAC/VC) The DECT Handsets meet the FCC standard for HearingAidCompatibility. KDB447498 procedures specified and 8212 in RegulatoryInformationCanada InterferenceInformation ThisproductmeetstheapplicableIndustryCanadatechnicalspecifications. Le prsent matriel est conforme aux specifications techniques applicables dIndustrie Canada. ThisdevicecomplieswithIndustryCanadalicenceexemptRSSstandard(s).Operationis subjecttothefollowingtwoconditions:

(1)thisdevicemaynotcauseinterference,and

(2) this device must accept any interference, including interference that may cause undesiredoperationofthedevice.LeprsentappareilestconformeauxCNRdIndustrie Canadaapplicablesauxappareilsradioexemptsdelicence.Lexploitationestautorise auxdeuxconditionssuivantes:

(1)lappareilnedoitpasproduiredebrouillage,et

(2)lutilisateurdelappareildoitacceptertoutbrouillageradiolectriquesubi,mmesile brouillageestsusceptibleden compromettrelefonctionnement. ThisClassBdigitalapparatuscomplieswithCanadianICES003. CetappareilnumriquedelaclasseBestconformelanormeNMB003duCanada. Under Industry Canada regulations, this radio transmitter may only operate using an antennaofatypeandmaximum(orlesser)gainapprovedforthetransmitterbyIndustry Canada.Toreducepotentialradiointerferencetootherusers,theantennatypeandits gainshouldbesochosenthattheequivalentisotropicallyradiatedpower(e.i.r.p.)isnot morethanthatnecessaryforsuccessfulcommunication. 8AL90328ENAAed0a 28 /29 8212 DECT Handset 8 Declaration of compliance ConformmentlarglementationdIndustrieCanada,leprsentmetteurradiopeut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse paslintensitncessaireltablissementdunecommunicationsatisfaisante. The device is compliance with RF field strength limits, users can obtain Canadian informationonRFexposureandcompliance. Le prsent appareil est conforme aux limites dintensit de champ RF,les utilisateurs peuventsurlexpositionauxradiofrquencesetlaconformitandcompliancedacqurir lesinformationscorrespondantes. ExposuretoRadioFrequency(RF)Signals This wireless telephone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set the Ministry of Health (Canada), Safety Code 6. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.TheguidelinesarebasedonthesafetystandardspreviouslysetbybothU.S. andinternationalstandardsbodies.Thesestandardsincludeasubstantialsafetymargin designedtoassurethesafetyofallpersons,regardlessofageandhealth. Thisdeviceanditsantennamustnotbecolocatedoroperatinginconjunctionwithany otherantennaortransmitter.Thisdevicehasbeenshowntobecapableofcompliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Standard C95.1:2005 and has been testedinaccordancewiththemeasurementproceduresspecifiedinIEEE15282013. HearingAidCompatibility(HAC/VC) The AidCompatibility. Le prsent matriel est conforme aux specifications techniques applicables dIndustrie Canada. DECTHandsetsmeettheICCS03issue9PartV standardforHearing 8212 TheRingerEquivalenceNumber(REN)isanindicationofthemaximumnumber ofdevicesallowedtobeconnectedtoatelephoneinterface.Theterminationof aninterfacemayconsistofanycombinationofdevicessubjectonlytothe requirementthatthesumoftheRENsofallthedevicesnotexceedfive.

/Lindicedquivalencedelasonnerie(IES)sertindiquerlenombre maximaldeterminauxquipeuventtreraccordsuneinterface tlphonique.Laterminaisonduneinterfacepeutconsisterenune combinaisonquelconquededispositifs,laseulecondition quelasommedindicesdquivalencedelasonneriedetouslesdispositifs nexcdepascinq. REN: NAN 8AL90328ENAAed0a 29 /29 Phone description Answer the call. Long press (feature depending on the system):

redial last number or access the redial list. Hang up. Long press: switch on the phone / switch off the phone. Return to previous menu. Erase a character. Delete an entire field. Short press: back to homepage. Long press: lock/unlock keypad. Access MENU. Confirm. Navigate. Access your personal directory. In communication mode: activate/deactivate the mute feature. No feature is associated with this key in idle mode. In idle mode Short press: access the ringer adjustment feature. Long press: Activate/deactivate ringer. Answering a call with loudspeaker activated. In communication mode: Activate/deactivate the loudspeaker. Switch off ringer. Long press: access the DTMF feature during a conversation. Green steady: the phone is on the charger and the battery LED is fully charged. Red steady: the phone is on the charger and the battery is charging. Slow orange flashing: telephonic event such as unread message, missed call, etc. Rapid orange flashing: Incoming call. Red flashing: out of coverage. Flashing when the phone is plugged into the charger means the same as when the phone is not plugged into the charger. 3.5 mm jack plug for headset and maintenance. Charging your telephone battery Charging the battery on a single charger Put your phone on its support. Plug the USB cable into a 5V socket (AC/DC adaptor, computer, ). The AC/DC adaptor is not provided with the set. Please contact your provider for a recommended AC/DC adaptator. You can configure how the handset behaves when it is installed on the charger using the settings menu. Refer to the chapter on configuring your telephone. LED Green steady: the phone is on the charger (or connected to the USB cable) and the battery is fully charged. Red steady: the phone is on the charger and the battery is charging. Recharge your telephone battery regularly. The telephone can be on or off when recharging the battery. If the telephone is to remain unused or out of its charger for several weeks, remove the battery and store it separately. The battery charging time is less than 10 hours. Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site . Alcatel-Lucent Enterprise copyright 2015 e d i u g k c i u Q t e s d n a H T C E D 2 1 2 8 t n e c u L

-

l e t a c l A m o c

. t n e c u l

-

l e t a c l a

. e s i r p r e t n e Status icons The status icons are displayed on the welcome screen and indicate the status of the telephone. Battery charge level. Received messages voice mail and callback request texts and unanswered calls. Ringer active. Ringer disabled. Radio reception quality. Loudspeaker on (in conversation). Mute on (in conversation). Economy mode activated and used (green). Economy mode activated (gray). Missed calls. Call icons Making a call. Receiving a call. Accessing the directories. Features Answered incoming calls. Redialing (long press). Send the call. End the call. Calling from your personal directory (PersSpDial). Programming your personal directory (PersSpDial). Call from call log. (All incoming, outgoing, missed or unanswered calls are displayed in the call log). You can obtain details on the status icons from the tooltips that appear on the welcome screen when you use the navigator:

Consulting text messages. Sending text messages. Consulting your voice mailbox. MENU icons The MENU is accessible from the welcome screen by pressing the OK key. It provides access to all the functions available on your system. All icons are described in their unselected state. When selected, the icons are displayed in a purple. Directories:

Manage your personal directory and access the company directory. Call log. Consult and send voice and text messages. Access the general settings of the phone (key sound, economy mode, charger warning, programming of F1 and F2 keys, etc.). Ringing setting. Choice of language. Choose the tune. Adjusting the ringer volume. Access the ringer and vibrate adjustment feature. Locking features on your terminal. Access the handset settings menu. (Device info., Coverage warning., Security., ). Related Documentation - Other languages for these Safety and Regulatory Instructions and User Documentation are available at the following Web site . Alcatel-Lucent Enterprise copyright 2015 e d i u g k c i u Q t e s d n a H T C E D 2 1 2 8 t n e c u L

-

l e t a c l A m o c

. t n e c u l

-

l e t a c l a

. e s i r p r e t n e