X3740 DECT USB Dongle User Manual

RTX3740 user manual Start up Insert the dongle to the computer USB port and follow the steps below for registration. Windows USB Driver After is plugged to the USB port, the dongle will show up as an unknown device, because the driver for it cannot be located automatically. Right-click the device and select Update Driver Software. RTX3740 user manual Click Browse my computer for driver software. RTX3740 user manual Click Let me pick form a list of device drivers on my computer. RTX3740 user manual Make sure Show All Devices is selected and click Next. RTX3740 user manual Click Have Disk. Browse to D:\GriffinSDK_v0211\FlexUsb\Driver and click OK. RTX3740 user manual Click Next. This warning is because the USB VID/PID of the CVM 493 board is not listed for the driver. Click Yes. RTX3740 user manual Please perform initial configuration next. RTX3740 user manual Initial Configuration Launch Jigsaw: D:\GriffinSDK_v0211\Jigsaw\Jigsaw.exe RTX3740 user manual Select the Device Basics tab:

In the LAS DB group, click Unlock and select Device in the drop-down list. The dongle reboots. RTX3740 user manual Select the Call Control tab:

RTX3740 user manual Click the < Lines button:

Click the + button 4 times. RTX3740 user manual 4 lines are created:

Click the > Lines button to hide line configuration. RTX3740 user manual Select the Mobility Management tab:

Enter a base name e.g. DONGLE and click the Set button. Cat-iq handsets will show this base name during registration. RTX3740 user manual Click the registration enable button and perform registration from the handset. RTX3740 user manual Additional information for RTX3740 Regulatory information United States This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by RTX Products could void the users authority to operate the equipment. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines , and the device should be installed and operated with minimum distance 5mm between the radiator& your body. Regulatory information Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement The device is compliance with SAR evaluation limits, users can obtain Canadian information on RF exposure and compliance Le prsent appareil est conforme Aprs examen de ce matriel aux conformit ou aux limites dintensit de champ SAR, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir les informations correspondantes