| submitted | available | document details (if available) | source link |
|---|---|---|---|
| April 12 2011 | January 06 2012 | User Manual_DV300F.pdf ltsai Acrobat Distiller 9.3.3 (Windows) |
| various | User manual | Users Manual | 2.40 MiB | April 12 2011 / January 06 2012 |
User Manual DV300F This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Click a topic Basic troubleshooting Quick reference Contents Basic functions Extended functions Shooting options Playback/Editing Wireless network Settings Appendixes Index Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warningsituations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera. Do not use your camera near ammable or explosive gases and liquids. This may cause a re or explosion. Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your cameras internal components. Do not insert ammable materials into the camera or store these materials near the camera. This may cause a re or electric shock. Avoid covering the camera or charger with blankets or clothes. The camera may overheat, which may distort the camera or cause a re. Do not handle your camera with wet hands. This may result in electric shock. Prevent damage to subjects eyesight. Do not use the ash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the ash too close to your subjects eyes, this can cause temporary or permanent eyesight damage. If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or charger, and then contact a Samsung service center. 1 Health and safety information Cautionsituations that could cause damage to your camera or other equipment Do not touch the ash while it res. The ash is very hot when red and may burn your skin. Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries. Do not damage or heat the battery. Inauthentic, damaged, or heated batteries may cause a re or personal injury. Use only Samsung-approved batteries, chargers, cables and accessories. Using unauthorized batteries, chargers, cables or accessories can cause batteries to explode, damage your camera, or cause injury. Samsung is not responsible for damage or injuries caused by unapproved batteries, chargers, cables or accessories. Use the battery only for its intended purpose. Misusing the battery may cause a re or electric shock. When you use the AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in re or electric shock. Disconnect the charger from the wall socket when not in use. Failing to do so may result in re or electric shock. Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries. This may cause a re or electric shock. Do not allow the AC charger to come in contact with the +/-
terminals on the battery. This may cause a re or electric shock. Do not force the cameras parts or apply pressure to the camera. This may cause your camera to malfunction. 2 Health and safety information Exercise caution when you connect cables or adapters and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories. Keep cards with magnetic strips away from the camera case. Information stored on the card may be damaged or erased. Never use a damaged charger, battery, or memory card. This may result in electric shock or camera malfunction or cause a re. Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of les or damage that may result from camera malfunction or improper use. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data. 3 Copyright information Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. Mac is a registered trademark of the Apple Corporation. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Trademarks and trade names used in this manual are the property of their respective owners. Camera specications or contents of this manual may be changed without prior notice due to upgrade of camera functions. We recommend using your camera within the country where you purchase it. You are not allowed to reuse or distribute any part of this manual without prior permission. For Open Source License information, refer to the OpenSourceInfo.pdf in the provided CD-ROM. Outline of the User Manual Basic functions Learn about your cameras layout, icons, and basic functions for shooting. Extended functions Learn how to capture a photo and record a video by selecting a mode. Shooting options Learn how to set the options in Shooting mode. Playback/Editing Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, HDTV, or 3D TV. Wireless network Learn to connect to wireless local area networks
(WLANs) and use functions. Settings Refer to options to congure your cameras settings. Appendixes Get information about error messages, specications, and maintenance. 13 34 57 84 111 131 137 4 Indicators used in this manual p G Shooting mode Indicator Smart Auto S Program Aperture Priority, Shutter Priority, Manual DUAL IS d s Scene R Panorama Creative Movie Maker K v Movie Icons used in this manual Icon Function Additional information Safety warnings and precautions Camera buttons. For example, [Shutter] represents the shutter button. Page number of related information The order of options or menus you must select to perform a step; for example: Select a Photo Size
(represents Select a, and then select Photo Size). Annotation
[
(
]
)
*
Shooting mode icons These icons appear in the text when a function is available in a mode. See the example below. Note: The s mode may not support functions for all scenes. For example:
Available in Program, Aperture Priority, Shutter Priority, DUAL IS, and Movie modes 5 Expressions used in this manual Pressing the shutter Half-press [Shutter]: press the shutter halfway down Press [Shutter]: press the shutter all the way down Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO sensitivity. By altering the exposure, your photos will be darker or lighter. Half-press [Shutter]
Press [Shutter]
S Normal exposure S Overexposure (too bright) Subject, background, and composition Subject: the main object in a scene, such as a person, animal, or still life Background: the objects around the subject Composition : the combination of a subject and background Background Subject Composition 6 Basic troubleshooting Learn to solve common problems by setting shooting options. The subjects eyes appear red. Red eye occurs when the subject's eyes reect light from the camera ash. Set the ash option to If the photo has already been captured, select Red-eye Fix. (p. 61) Red-eye or Red-eye Fix in the edit menu. (p. 98) Photos have dust spots. If dust particles are present in the air, you may capture them in photos when you use the ash. Turn off the ash or avoid capturing photos in a dusty place. Set ISO sensitivity options. (p. 63) Photos are blurred. Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly. Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 32) Use the d mode. (p. 47) Photos are blurred when shooting at night. Subjects come out too dark because of backlighting. Night in s mode. (p. 37) As the camera tries to let in more light, the shutter speed slows. This can make it difcult to hold the camera steady long enough to take a clear picture and may result in camera shake. Select Turn on the ash. (p. 61) Set ISO sensitivity options. (p. 63) Use a tripod to prevent your camera from shaking. When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may appear too dark. Avoid shooting toward the sun. Select Set the ash option to Adjust the exposure. (p. 73) Set the metering option to Spot if a subject is in the center of the frame. (p. 74) Backlight in s mode. (p. 37) Fill in. (p. 61) 7 Quick reference Capturing photos of people s mode > Beauty Shot f 40 Red-eye/Red-eye Fix (to prevent or correct red-eye) f 61 Face Detection f 68 Self-Portrait f 69 Capturing photos at night or in the dark s mode > Night, Sunset, Dawn f 37 Flash options f 61 ISO sensitivity (to adjust the sensitivity to light) f 63 Capturing action photos h mode f 45 High-speed burst mode f 78 Precapture f 79 Adjusting the exposure
(brightness) s mode > HDR f 38 ISO sensitivity(to adjust the sensitivity to light) f 63 EV (to adjust exposure) f 73 Metering f 74 Bracket f 79 Reducing camera shake Optical Image Stabilization (OIS) f 31 d mode f 47 Viewing les by category in Smart Album f 88 Viewing les as thumbnails f 89 Deleting all les on the memory card f 90 Viewing les as a slide show f 93 Viewing les on a TV, HDTV, or 3D TV f 101 Connecting your camera to a computer f 104 Adjusting sound and volume f 133 Adjusting the brightness of the display f 133 Changing the display language f 134 Setting the date and time f 134 Before contacting a service center f 148 Capturing panoramic action photos R mode > Action Panorama f 50 Capturing photos of text, insects, or owers s mode > Text f 37 Macro f 64 Capturing photos of scenery s mode > Landscape f 37 R mode f 48 Capturing 3D photos s mode > 3D Photo f 38 R mode > 3D Panorama f 48 Applying effects to photos s mode > Zooming Shot f 41 Smart Filter effects f 81 Image Adjust (to adjust Contrast, Sharpness, or Saturation) f 83 8 Contents Basic functions ................................................................. 13 Unpacking ................................................................... 14 Camera layout ............................................................. 15 Inserting the battery and memory card ....................... 18 Charging the battery and turning on your camera ...... 19 Charging the battery ................................................... 19 Turning on your camera .............................................. 19 Performing the initial setup ......................................... 20 Learning icons ............................................................. 22 Selecting options or menus ........................................ 23 Using [MENU] ............................................................ 23 Using [Fn] .................................................................. 25 Setting the display and sound .................................... 26 Setting the display type ............................................... 26 Setting the sound ....................................................... 27 Capturing photos ......................................................... 28 Zooming .................................................................... 29 Reducing camera shake (OIS) ..................................... 31 Tips for getting a clearer photo ................................... 32 Extended functions .......................................................... 34 Using the Smart Auto mode ........................................ 35 Using the Scene mode ................................................ 37 Using the 3D Photo mode ........................................... 38 Using the HDR mode ................................................. 38 Using the Magic Frame mode ..................................... 39 Using the Beauty Shot mode ....................................... 40 Using the Zooming Shot mode .................................... 41 Using the Program mode ............................................ 42 Using the Aperture Priority, Shutter Priority, or Manual mode .......................................................... 43 Using the Aperture Priority mode .................................. 44 Using the Shutter Priority mode .................................... 45 Using the Manual mode .............................................. 46 Using the DUAL IS mode ............................................ 47 Using the Panorama mode ......................................... 48 Using the 2D or 3D Panorama mode ........................... 48 Using the Action Panorama mode ................................ 50 Using the Movie mode ................................................ 51 Recording high-speed videos ...................................... 53 Using the Smart Scene Detection mode ...................... 54 Using the Creative Movie Maker mode ...................... 55 Making a movie with the Creative Movie Maker ............. 55 View a movie made in Creative Movie Maker mode ....... 56 9 Contents Shooting options .............................................................. 57 Selecting a resolution and quality ............................... 58 Selecting a resolution .................................................. 58 Setting the photo quality .............................................. 59 Using the timer ............................................................ 60 Shooting in the dark .................................................... 61 Preventing red-eye ..................................................... 61 Using the ash ........................................................... 61 Adjusting the ISO sensitivity ......................................... 63 Changing the cameras focus ..................................... 64 Using macro .............................................................. 64 Using auto focus ........................................................ 64 Focusing on a selected area ....................................... 66 Using tracking auto focus ............................................ 66 Adjusting the focus area .............................................. 67 Using Face Detection .................................................. 68 Detecting faces .......................................................... 68 Capturing a self portrait shot ........................................ 69 Capturing a smile shot ................................................ 69 Detecting eye blinking ................................................. 70 Using Smart Face Recognition .................................... 70 Registering faces as your favorites (My Star) ................. 71 Adjusting brightness and color ................................... 73 Adjusting the exposure manually (EV) ........................... 73 Changing the metering option ...................................... 74 Selecting a White Balance setting ................................ 75 Using burst modes ...................................................... 78 Capturing photos in the High-speed burst mode ........... 78 Capturing photos in the Precapture mode .................... 79 Capturing bracketed photos ........................................ 79 Applying effects/Adjusting images .............................. 81 Applying Smart Filter effects ........................................ 81 Adjusting your photos ................................................. 83 10 Contents Playback/Editing ............................................................... 84 Viewing photos or videos in Playback mode .............. 85 Starting Playback mode .............................................. 85 Viewing photos .......................................................... 91 Playing a video ........................................................... 94 Editing a photo ............................................................ 96 Resizing photos ......................................................... 96 Rotating a photo ......................................................... 96 Applying Smart Filter effects ........................................ 97 Adjusting your photos ................................................. 98 Creating a print order (DPOF) ....................................... 99 Viewing les on a TV, HDTV, or 3D TV ....................... 101 Transferring les to your Windows computer ........... 102 Transferring les with Intelli-studio ............................... 103 Transferring les by connecting the camera as a removable disk .................................................. 105 Disconnecting the camera (for Windows XP) ............... 106 Transferring les to your Mac computer ................... 107 Printing photos with a PictBridge photo printer ....... 108 Wireless network ............................................................ 109 Connecting to a WLAN and conguring network settings ........................................................ 110 Connecting to a WLAN ............................................. 110 Setting network options ............................................ 111 Manually setting the IP address ................................. 111 Network connection tips ........................................... 112 Sending photos via email .......................................... 113 Changing email settings ............................................ 113 Sending photos via email .......................................... 115 Entering text ............................................................. 116 Using photo or video sharing websites .................... 117 Accessing a website ................................................ 117 Uploading photos or videos ....................................... 117 Using a smart phone as a remote shutter release .... 118 Viewing photos or videos on a AllShare-enabled TV ............................................... 120 Viewing photos or videos on a TV I ............................. 120 Viewing photos or videos on a TV II ............................ 122 Sending or receiving photos or videos with another camera ......................................................... 123 Sending photos or videos to another camera .............. 123 Receiving photos or videos from another camera ........ 123 Using Auto Backup to send photos or videos .......... 125 Installing the program for Auto Backup on your PC ...... 125 Sending photos or videos to a PC ............................. 125 Sending photos or videos to a Blu-ray disc Player ....... 126 About the Wakeup on LAN (WOL) feature ................ 127 11 Contents Settings ........................................................................... 129 Settings menu ........................................................... 130 Accessing the settings menu .................................... 130 Sound ..................................................................... 131 Display .................................................................... 131 Settings ................................................................... 132 Appendixes ..................................................................... 135 Error messages ......................................................... 136 Camera maintenance ................................................ 137 Cleaning your camera ............................................... 137 Using or storing the camera ...................................... 138 About memory cards ................................................ 139 About the battery ...................................................... 142 Before contacting a service center ........................... 146 Camera specications ............................................... 149 Glossary ..................................................................... 153 FCC notice ................................................................. 158 Index .......................................................................... 159 12 Basic functions Learn about your cameras layout, icons, and basic functions for shooting. Unpacking 14 Camera layout 15 Inserting the battery and memory card 18 Charging the battery and turning on your camera 19 Charging the battery 19 Turning on your camera 19 Performing the initial setup 20 Learning icons 22 Selecting options or menus 23 Using [MENU] 23 Using [Fn] 25 Setting the display and sound 26 Setting the display type 26 Setting the sound 27 Capturing photos 28 Zooming 29 Reducing camera shake (OIS) 31 Tips for getting a clearer photo 32 Unpacking The following items are included in your product box. Optional accessories Camera AC adapter/
USB cable Camera case A/V cable Rechargeable battery Strap User Manual CD-ROM Quick Start Guide Battery charger Memory card/
Memory card adapter The illustrations may differ slightly from the items shipped with your product. The items included in the box may differ depending on the model. You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any problems caused by using unauthorized accessories. Basic functions 14 Camera layout Before you start, familiarize yourself with your cameras parts and their functions. POWER button Shutter button Flash AF-assist light/Timer lamp Lens Microphone Speaker Tripod mount Battery chamber cover Insert a memory card and battery Basic functions 15 USB and A/V port Accepts USB cable and A/V cable Camera layout Status lamp Blinking: When the camera is saving a photo or video, being read by a computer or printer, or when the image is out of focus Steady: When the camera is connected to a computer, charging the battery, or when the image is in focus Zoom button In Shooting mode: Zoom in or out In Playback mode: Zoom in on part of a photo or view les as thumbnails, or adjust the volume Attaching the strap y x Display Buttons
(p. 17) Basic functions 16 Camera layout Mode dial p G Description Icon T Smart Auto: Capture a photo with a scene mode selected automatically by the camera. Program: Capture a photo by setting options except the shutter speed and aperture value which the camera sets automatically. A h Aperture Priority: The camera selects a shutter speed based on the aperture value you have set manually. Shutter Priority: The camera selects an aperture value based on the shutter speed you have set manually. M Manual: Adjust various camera settings including shutter speed and aperture value. d DUAL IS: Capture a photo with options that reduce camera shake. s Scene: Capture a photo with options preset for a specic scene. R Panorama: Capture and combine a series of photos to create a panoramic image. K Creative Movie Maker: Create movies from photos and videos stored on the memory card. v Movie: Customize settings to record a video. Buttons Button Description Start recording a video. Access options or menus. Access the Home screen. Basic functions D Change the display option. c Change the macro option. F Change the ash option. t Change the timer option. Other functions Move up Move down Move left Move right Conrm the highlighted option or menu. Enter Playback mode. Access options in Shooting mode. Delete les in Playback mode. Basic functions 17 Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Push the card gently until it disengages from the camera, and then pull it out of the slot. Memory card Insert a memory card with the gold-colored contacts facing up. Battery lock Insert the battery with the Samsung logo facing up. Rechargeable battery Slide the lock to the right to release the battery. You can use the internal memory for temporary storage if a memory card is not inserted. Basic functions 18 Memory card Rechargeable battery Charging the battery and turning on your camera Charging the battery Before you use the camera for the rst time, you must charge the battery. Plug the small end of the USB cable into your camera, and then plug the other end of the USB cable into the AC adapter. Turning on your camera Press [POWER] to turn your camera on or off. The initial setup screen appears when you turn on the camera for the rst time. (p. 20) Indicator light Red light on: Charging Red light off: Fully charged Turning on your camera in Playback mode Press [P]. The camera turns on and immediately accesses Playback mode. Use only the AC adapter and USB cable supplied with your camera. If you use another AC adapter (such as SAC-48), the camera battery may not charge or work properly. If you turn on your camera by pressing and holding [P] for about 5 seconds, the camera does not emit any sounds. Basic functions 19 Performing the initial setup When you turn on your camera for the rst time, the initial setup screen appears. Follow the steps below to congure the cameras basic settings. 1 Verify that Language is highlighted, and then press 4 Press [D/c] to select Home, and then press [o]. When you travel to another country, select Visit, and then
[t] or [o]. select a new time zone. 5 Press [F/t] to select a time zone, and then press [o]. To set daylight-savings time, press [D]. 2 Press [D/c/F/t] to select a language, and then press [o]. 3 Press [c] to select Time Zone, and then press [t] or
[o]. Time Zone : Home London Back DST Basic functions 20 Performing the initial setup 6 Press [c] to select Date/Time Set, and then press
[t] or [o]. Date/Time Set Year Month Day Hour Min Exit Set The screen may differ depending on the language selected. 7 Press [F/t] to select an item. 8 Press [D/c] to set the date and time, and then press [o]. 9 Press [c] to select Date Type, and then press [t] or
[o]. 10 Press [D/c] to select a date type, and then press
[o]. Language Time Zone Date/Time Set Date Type English London 2011/01/01 YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY Back Set The default date type may differ depending on the language selected. 11 Press [m] to switch to Shooting mode. Basic functions 21 Learning icons The icons the camera displays on the screen change according to the mode you select or the options you set. 1 2 Shooting options (right) Icon Description 3 Shooting information Icon Description 2 3 1 Shooting options (left) Icon Description Smart lter Face tone Image adjustment (contrast, sharpness, and saturation) White balance White balance adjusted Face retouch Face detection Focus area Optical Image Stabilization (OIS) Sound Alive on ISO sensitivity Smart zoom on Photo resolution Video resolution Single shot mode High-speed burst mode Precapture mode Bracket mode Frame rate Photo quality Metering Flash Flash intensity adjusted Auto focus option Timer Basic functions 22 Shooting mode Aperture value Shutter speed Exposure value Available number of photos Memory card inserted
: Fully charged
: Empty (Recharge)
: Partially charged Available recording time Auto focus frame Camera shake Zoom indicator Zoom ratio Histogram (p. 26) Current time and date Going back to the previous menu Press [m] again to go back to the previous menu. Half-press [Shutter] to return to Shooting mode. Selecting options or menus To select an option or a menu, press [m] or [f]. Using [MENU]
To select options, press [m], and then rotate the navigation button or press [D/c/F/t] or [o]. 1 In Shooting mode, press [m]. 2 Rotate the navigation button or press [D/c/F/t]
to scroll to a menu or an option. or 3 Press [o] to conrm the highlighted option or menu. Basic functions 23 Selecting options or menus For example, to select a White Balance option in Program mode:
1 Rotate the mode dial to p. 2 Press [m]. Photo Size Quality EV ISO White Balance Smart Filter Face Detection Exit Move 4 Rotate the navigation button or press [D/c] to select White Balance, and then press [t] or [o]. Photo Size Quality EV ISO White Balance Smart Filter Face Detection Exit Move 5 Rotate the navigation button or press [F/t] to select a White Balance option. White Balance : Daylight 3 Rotate the navigation button or press [D/c] to select a, and then press [t] or [o]. Back Adjust 6 Press [o] to save your settings. 7 Press [m] to return to Shooting mode. Basic functions 24 Selecting options or menus Using [Fn]
You can access shooting options by pressing [f], but some options are not available. For example, to select a White Balance option in Program mode:
1 Rotate the mode dial to p. 3 Press [D/c] to scroll to
. White Balance : Auto WB 2 Press [f]. Photo Size : 4096X3072 Exit Move Exit Move 4 Rotate the navigation button or press [F/t] to select a White Balance option. White Balance : Daylight Exit Move 5 Press [o] to save your settings. Basic functions 25 Setting the display and sound Learn how to change the basic display information and sound settings. Setting the display type You can select a display type for the Shooting or Playback mode. Each type displays different shooting or playback information. See the table below. Press [D] repeatedly to change the display type. About histograms A histogram is a graph that illustrates how light is distributed in your photo. If the histogram has a high peak on the left, the photo is underexposed and will appear dark. A peak on the right of the graph means that the photo is overexposed and will appear washed out. The height of the peaks is related to color information. The more of a particular color, the taller the peak. Show all photographic information. S Under-exposed S Well-exposed S Over-exposed Mode Description Hide all information about shooting. Hide information about shooting, except the Shooting information on the bottom line. Display all information about shooting. Display histogram. Hide all information about the current le. Display information about the current le, except the shooting settings and histogram. Display all information about the current le. Playback Basic functions 26 Setting the display and sound Setting the sound Turn on or off the sound your camera emits when you perform functions. 1 In Shooting or Playback mode, press [m]. 2 Select U Beep Sound. 3 Select an option. Option Off On Description The camera does not emit any sounds. The camera emits sounds. Basic functions 27 Capturing photos Learn how to capture photos easily and quickly in Smart Auto mode. 1 Rotate the mode dial to T. 3 Half-press [Shutter] to focus. A green frame means the subject is in focus. A red frame means the subject is out of focus. 2 Align your subject in the frame. 4 Press [Shutter] to capture a photo. 5 Press [P] to view the captured photo. To delete the photo, press [f], and then select Yes. 6 Press [P] to return to Shooting mode. See page 32 for tips to get clearer photos. Basic functions 28 Capturing photos Zooming You can capture close-up photos by adjusting the zoom. Zoom ratio Zoom out Zoom in The wider you rotate the zoom button, the faster the camera zooms in or out. p A h M s Digital zoom The Digital zoom is supported by default in Shooting mode. If you zoom in on a subject in Shooting mode and the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the 18X Optical zoom and 4X Digital zoom, you can zoom in up to 72 times. Optical range Zoom indicator Digital range The Digital zoom is not available with the Face detection option, Smart Filter effect, Tracking AF option, Burst option, or Manual Focus. If you capture a photo with the Digital zoom, the photo quality may be lower than normal. Basic functions 29 Capturing photos p A h M Smart zoom You can use 24X Smart zoom which lets you zoom in with less degradation of picture quality than the Optical zoom and Digital zoom. By using both the Smart zoom and Digital zoom, you can zoom in up to 72 times. Smart range Zoom indicator Digital range Smart zoom is not available with the Face detection option, Smart Filter effect, Tracking AF option, Burst option, or Manual Focus. If you capture a photo with the Smart zoom, the photo quality may be lower than normal. Setting Smart zoom 1 In Shooting mode, press [m]. 2 Select a Smart Zoom. 3 Select an option. Icon Description Off: The Smart zoom is deactivated. On: The Smart zoom is activated. Basic functions 30 Capturing photos Reducing camera shake (OIS) Reduce camera shake optically in Shooting mode. p A h M s v OIS may not function properly when:
- you move your camera to follow a moving subject
- you use the Digital zoom
- there is too much camera shake
- the shutter speed is slow (for example, when you capture night scenes) S Before correction S After correction 1 In Shooting mode, press [m]. 2 Select a or V OIS. 3 Select an option. Icon Description Off: OIS is deactivated. On: OIS is activated.
- the battery is low
- you capture a close-up shot If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod. If the camera is hit or dropped, the display will be blurry. If this occurs, turn off the camera, and then turn it on again. Basic functions 31 Tips for getting a clearer photo Holding your camera correctly Reducing camera shake Ensure nothing is blocking the lens, ash, or microphone. Set the Optical Image Stabilization option to reduce camera shake optically. (p. 31) Select the d mode to reduce camera shake both optically and digitally. (p. 47) Half-pressing the shutter button When is displayed Half-press [Shutter] and adjust the focus. The camera adjusts the focus and exposure automatically. Camera shake Focus frame Press [Shutter] to capture the photo if the focus frame appears in green. Change the composition and half-press [Shutter] again if the focus frame appears in red. When you shoot in the dark, avoid setting the ash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera steady long enough to capture a clear photo. Use a tripod or set the ash option to Fill in. (p. 61) Set ISO sensitivity options. (p. 63) The camera sets the aperture value and shutter speed automatically. Basic functions 32 Preventing your subject from being out of focus It may be difcult to get your subject in focus when:
- there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background)
- the light source behind the subject is too bright
- the subject is shiny or reective
- the subject includes horizontal patterns, such as blinds
- the subject is not positioned in the center of the frame Using the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to capture your photo. When you capture photos in low light Turn on the ash.
(p. 61) When subjects are moving rapidly Use the High-speed burst mode or Precapture function.
(p. 78) Basic functions 33 Extended functions Learn how to capture a photo and record a video by selecting a mode. Using the Smart Auto mode 35 Using the Scene mode 37 Using the 3D Photo mode 38 Using the HDR mode 38 Using the Magic Frame mode 39 Using the Beauty Shot mode 40 Using the Zooming Shot mode 41 Using the Program mode 42 Using the Aperture Priority, Shutter Priority, or Manual mode 43 Using the Aperture Priority mode 44 Using the Shutter Priority mode 45 Using the Manual mode 46 Using the DUAL IS mode 47 Using the Panorama mode 48 Using the 2D or 3D Panorama mode 48 Using the Action Panorama mode 50 Using the Movie mode 51 Recording high-speed videos 53 Using the Smart Scene Detection mode 54 Using the Creative Movie Maker mode 55 Making a movie with the Creative Movie Maker 55 View a movie made in Creative Movie Maker mode 56 Using the Smart Auto mode In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes. 1 Rotate the mode dial to T. 2 Align your subject in the frame. Portraits with backlighting Description Icon The camera automatically selects a scene. An appropriate scene icon appears at the bottom left of the screen. The icons are listed below. Icon Description Landscapes Scenes with bright white backgrounds Landscapes at night (when the ash is off) Portraits at night Landscapes with backlighting Portraits Close-up photos of objects Close-up photos of text Sunsets Blue skies Forested areas Close-up photos of colorful subjects Camera is stabilized or on a tripod (when shooting in the dark) Actively moving subjects Fireworks (when using a tripod) 3 Half-press [Shutter] to focus. 4 Press [Shutter] to capture the photo. Extended functions 35 Using the Smart Auto mode If the camera does not recognize an appropriate scene mode, it uses the default settings for the T mode. Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting. The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, or distance to the subject. Even if you use a tripod, the camera may not detect the mode if the subject is moving. In T mode, the camera consumes more battery power, because it changes settings often to select appropriate scenes. Extended functions 36 Using the Scene mode In Scene mode, you can capture a photo with options that are preset for a specic scene. 1 Rotate the mode dial to s. 2 Select a scene. Option Text 3D Photo Option 3D Photo HDR Magic Frame Beauty Shot Night Description Capture scenes with a 3D effect (the 3D effect works only on a 3D TV or 3D monitor). Capture scenes with emphasis on mid-tones, by minimizing the dark and bright areas. Capture scenes with various frame effects. Capture a portrait with options to hide facial imperfections. Capture scenes at night or in low lighting (using a tripod is recommended). Landscape Capture still-life scenes and landscapes. Extended functions 37 Description Clearly capture text from printed or electronic documents. Capture scenes at sunset, with natural-looking reds and yellows. Capture scenes at sunrise. Capture backlit subjects. Reduce underexposure of subjects caused by sunlight reected from sand or snow. Capture scenes with blurred edges. Sunset Dawn Backlight Beach &
Snow Zooming Shot To change a scene mode, press [m], and then
. You can select any of the scenes listed. select 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press [Shutter] to capture the photo. Using the Scene mode Using the 3D Photo mode In 3D Photo mode, you can capture scenes with a 3D effect. 1 Rotate the mode dial to s. 2 Select 3D Photo. 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press [Shutter] to capture the photo. The camera captures 2 photos in both JPEG and MPO le formats. In 3D Photo mode, the resolution is automatically set to
. In 3D Photo mode, some shooting options are not available. You can view an MPO le that supports the 3D effect only on an MPO-compatible display, such as a 3D TV or 3D monitor. On your camera's display, you can view only JPEG les. Use proper 3D glasses when you view an MPO le on a 3D TV or 3D monitor. Using the HDR mode In HDR(High Dynamic Range) mode, your camera captures two photos with different exposures, and then overlays the bright area of the underexposed photo and the dark area of the overexposed photo. You can capture photos with soft, rich colors. S Without HDR S With HDR effect effect 1 Rotate the mode dial to s. 2 Select HDR. 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press [Shutter] to capture the photo. The camera captures 2 photos, and then automatically merges them into a single photo. Extended functions 38 Using the Scene mode The HDR effect may be affected by camera shake, lighting, movement of the subject, and the shooting environment. You cannot use the ash when you use the HDR mode. It may take longer to save a photo using the HDR mode. When you use the HDR mode, the preview image on the screen and the captured photo may appear slightly larger than a photo captured without this effect. When you capture a moving subject using the HDR mode, an afterimage may appear. 4 Select a Frame. 5 Select an option. Frame Quality OIS Back Wall Art Old Film Ripple Full Moon Old Record Magazine Sunny Day Set Using the Magic Frame mode In Magic Frame mode, you can apply various frame effects to your photos. The shape and the feel of the photos will change according to the frame you select. 1 Rotate the mode dial to s. 2 Select Magic Frame. 3 Press [m]. 6 Press [m] to return to Shooting mode. 7 Align your subject in the frame, and then half-press
[Shutter] to focus. 8 Press [Shutter] to capture the photo. In Magic Frame mode, the resolution is automatically set to
. Extended functions 39 Using the Scene mode Using the Beauty Shot mode In Beauty Shot mode, you can capture a portrait with options to hide facial imperfections. 1 Rotate the mode dial to s. 2 Select Beauty Shot. 3 Press [m]. 4 Select a Face Tone. 5 Select an option. For example, increase the face tone setting to make skin appear lighter. Off Level 1 Level 2 Level 3 Face Tone Face Retouch Face Detection Smart FR Edit Photo Size Quality Focus Area Back Set 6 Select Face Retouch. 7 Select an option. For example, increase the face retouch setting to hide more imperfections. Face Tone Face Retouch Face Detection Smart FR Edit Photo Size Quality Focus Area Off Level 1 Level 2 Level 3 Back Set 8 Press [m] to return to Shooting mode. 9 Align your subject in the frame, and then half-press
[Shutter] to focus. 10 Press [Shutter] to capture the photo. When you use the Beauty Shot mode, the focus distance will be set to Auto Macro. Extended functions 40 Using the Scene mode Using the Zooming Shot mode In Zooming Shot mode, you can emphasize the center of a photo by blurring the edges. S Without Zooming Shot effect S With Zooming Shot effect 1 Rotate the mode dial to s. 2 Select Zooming Shot. 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press [Shutter] to capture the photo. In Zooming Shot mode, the resolution is automatically set to or below. Extended functions 41 Using the Program mode In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically. 1 Rotate the mode dial to p. 2 Set the desired options.
(For a list of options, refer to "Shooting options" starting on page 57.) 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press [Shutter] to capture the photo. Extended functions 42 Using the Aperture Priority, Shutter Priority, or Manual mode Adjust the aperture value or shutter speed to control the exposure of your photos. You can use these options in the Aperture Priority, Shutter Priority, and Manual modes. Aperture value The aperture is a hole that lets light into the camera. The aperture housing contains thin, metal plates that open and close, widening or narrowing the aperture, and controlling the amount of light that enters the camera. The size of the aperture is closely related to the brightness of a photo: the larger the aperture, the brighter the photo; the smaller the aperture, the darker the photo. Note that the larger the aperture value, the smaller the aperture size. For example, an aperture set to 5.6 is larger than an aperture set to 11. Shutter speed Shutter speed, which is an important factor in the brightness of a photo, refers to the amount of time it takes to open and close the shutter. A slow shutter speed allows more time to let light in. All things being equal, photos are brighter, but fast moving objects tend to blur. On the other hand, a fast shutter speed allows less time to let light in. Photos are darker, but objects in motion are captured more clearly. S Small aperture value (The size S Large aperture value (The size of the aperture is large.) of the aperture is small.) S Slow shutter speed S Fast shutter speed Extended functions 43 Using the Aperture Priority, Shutter Priority, or Manual mode Using the Aperture Priority mode The Aperture Priority mode allows you to set the aperture value manually while the camera automatically selects an appropriate shutter speed. 1 Rotate the mode dial to G. 2 Select Aperture Priority. To select another mode when the mode dial is set to G, press [m], and then select
a mode. 3 Press [o], and then rotate the navigation button or press [D/c] to adjust the aperture value. See page 43 for more information about the aperture value. 4 Set options.
(For a list of options, refer to Shooting options starting on page 57.) 5 Align your subject in the frame, and then half-press
[Shutter] to focus. 6 Press [Shutter] to capture the photo. Extended functions 44 Using the Aperture Priority, Shutter Priority, or Manual mode Using the Shutter Priority mode The Shutter Priority mode allows you to set the shutter speed manually while the camera automatically selects an appropriate aperture value. 1 Rotate the mode dial to G. 2 Select Shutter Priority. To select another mode when the mode dial is set to G, press [m], and then select
a mode. 3 Press [o], and then rotate the navigation button or press [D/c] to adjust the shutter speed. See page 43 for more information about the shutter speed. 4 Set options.
(For a list of options, refer to Shooting options starting on page 57.) 5 Align your subject in the frame, and then half-press
[Shutter] to focus. 6 Press [Shutter] to capture the photo. Extended functions 45 Using the Aperture Priority, Shutter Priority, or Manual mode Using the Manual mode The Manual mode allows you to adjust both the aperture value and the shutter speed manually. 1 Rotate the mode dial to G. 2 Select Manual. To select another mode when the mode dial is set to G, press [m], and then select
a mode. 3 Press [o] to select the aperture value or shutter speed. 4 Rotate the navigation button or press [D/c] to adjust the aperture value or shutter speed. 5 Set options.
(For a list of options, refer to Shooting options starting on page 57.) 6 Align your subject in the frame, and then half-press
[Shutter] to focus. 7 Press [Shutter] to capture the photo. Extended functions 46 Using the DUAL IS mode Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions. S Before correction S After correction 1 Rotate the mode dial to d. 2 Align your subject in the frame, and then half-press
[Shutter] to focus. 3 Press [Shutter] to capture the photo. The Digital zoom and Smart zoom are not available in d mode. The camera will correct photos optically only when the light source is brighter than uorescent light. If your subject is moving rapidly, the photo may be blurry. Set the Optical Image Stabilization option to reduce camera shake in different shooting modes. (p. 31) Extended functions 47 Using the Panorama mode In Panorama mode, you can capture a wide panoramic scene in a single photo. Capture and combine a series of photos to create a panoramic image. Using the 2D or 3D Panorama mode In Panorama mode, you can capture a normal or 3D panoramic photo. S Shooting example 1 Rotate the mode dial to R. 2 Press [m]. 3 Select a Panorama Live Panorama or 3D Panorama. 4 Press [m] to return to Shooting mode. 5 Align your subject in the frame, and then half-press
[Shutter] to focus. Align the camera with the far left or the far right, or very top or bottom, of the scene you want to capture. 6 Press and hold [Shutter] to start shooting. 7 With [Shutter] pressed, slowly move the camera in the direction that will let it capture the rest of the panorama. In 3D Panorama mode, you can capture a scene only in horizontal directions. When the viewnder is aligned with the next scene, the camera captures the next photo automatically. 8 When you are nished, release [Shutter]. When you have captured all the necessary shots, the camera combines them into one panoramic photo. Extended functions 48 In 3D Panorama mode, photos are captured in both JPEG and MPO le formats. You can view an MPO le that supports the 3D effect only on an MPO-compatible display, such as 3D TV or 3D monitor. On your camera's display, you can view only JPEG les. Use proper 3D glasses when you view an MPO le on a 3D TV or 3D monitor. Using the Panorama mode For best results when capturing panoramic photos, avoid the following:
- moving the camera too quickly or too slowly
- moving the camera too little to capture the next image
- moving the camera at irregular speeds
- shaking the camera
- changing the camera direction while capturing a photo
- shooting in dark places
- capturing moving subjects nearby
- shooting conditions where the brightness or color of light is changing Selecting Panorama mode will disable the digital and optical zoom functions. If you select Panorama mode while the lens is zoomed in, the camera automatically zooms out to the default position. In Panorama mode, some shooting options are not available. The camera may stop shooting due to the shooting composition or movement within the scene. In Panorama mode, your camera may not capture the last scene in its entirety if you stop moving the camera exactly where you want the scene to end. To capture the entire scene, move your camera slightly beyond the point where you want the scene to end. In 3D Panorama mode, your camera may not capture the very beginning or end of a scene due to the nature of the 3D effect. To capture the entire scene, move slightly beyond the beginning and end points you want to capture. Extended functions 49 Using the Panorama mode Using the Action Panorama mode In Action Panorama mode, you can capture and combine a series of photos of a moving subject. S Shooting example 1 Rotate the mode dial to R. 2 Press [m]. 3 Select a Panorama Action Panorama. 4 Press [m] to return to Shooting mode. 5 Align your subject in the frame, and then half-press
[Shutter] to focus. Align the camera with the far left or the far right side of the scene you want to capture. 6 Press and hold [Shutter] to start shooting. 7 With [Shutter] pressed, slowly move the camera in the direction that will let it capture the rest of the panorama. If there is more than one moving subject, the camera may not recognize the correct subject. If subjects are outside of the guide frame while capturing, the camera does not capture the movement of the subjects. 8 When you are nished, release [Shutter]. The camera automatically combines the shots into one photo. For best results when capturing panoramic photos, avoid the following:
- moving the camera too quickly or too slowly
- moving the camera too little to capture the next image
- moving the camera at irregular speeds
- shaking the camera
- changing the camera direction while capturing a photo
- shooting in dark places
- capturing moving subjects nearby
- shooting conditions where the brightness or color of light is changing The camera may take time to save panoramic photos. In Action Panorama mode, some shooting options are not available. Extended functions 50 Using the Movie mode In Movie mode, you can customize settings to record full HD videos of up to 20 minutes in length. The camera saves recorded videos as MP4 (H.264) les. H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standards organizations ISO-IEC and ITU-T. Some memory cards may not support high denition recording. If your card does not, set a lower resolution. Memory cards with slow writing speeds will not support high-resolution videos and high-speed videos. To record high-resolution or high-speed videos, use memory cards with faster write speeds. If you activate the OIS function while recording a video, the camera may record the operating sound of the OIS function. If you use the zoom function when recording a video, the camera may record the noise of the zoom operating. To decrease zoom noise, use the Sound Alive function. See Steps 3 and 4 below. 1 Rotate the mode dial to v. 2 Press [m]. 3 Select V Voice. 4 Select a Sound Alive option. Icon Description Sound Alive Off: Turn off the Sound Alive function to record the zoom noise. Sound Alive On: Turn on the Sound Alive function to reduce the zoom noise. Mute: Do not record sounds. Do not block the microphone when you use the Sound Alive function. Recordings made with Sound Alive may differ from actual sounds. 5 Set desired options. (For a list of options, refer to
"Shooting options" starting on page 57.) 6 Press 7 Press
(Video recording) to start recording.
(Video recording) again to stop recording. You can start recording a video in some modes by pressing
(Video recording) without having to rotate the mode dial to v. The video frame size may appear smaller while you are recording a video depending on the video resolution and frame rate. If you perform no operations for approximately 3 minutes while recording a video, the screen will become dim. To activate the screen, perform any camera operation. If you operate POWER, Zoom, Shutter, or Video recording button, the camera will carry out the assigned function, even when the screen is dim. Extended functions 51 Using the Movie mode Pause recording The camera allows you to temporarily pause a video while recording. With this function, you can record separate scenes as a single video. Capturing still images while recording a video You can capture still images while recording a video without switching to the photo shooting modes (up to 6 photos). This feature is available only when you use a memory card. Press [o] to pause while recording. Press [o] to resume. Press [Shutter] to capture images while recording a video. Captured images will be saved automatically. Images captured while recording a video Captured images will be automatically resized, depending on the size of the recorded video. You cannot capture still images while recording high-speed videos. You cannot capture still images when you pause the video recording. The quality of images captured while recording a video may be lower than those captured normally. Extended functions 52 Using the Movie mode Recording high-speed videos You can record high-speed videos by setting frame rates. High-speed videos will be played in slow motion at 30 FPS, regardless of the frame rate of the video. Memory cards with slow write speeds do not support high-speed videos. You cannot set Smart Filter effects or Smart Scene Detection mode when recording high-speed videos. The camera does not record audio when recording high-speed videos. The image quality of high-speed video may be lower than normal speed video. 1 Rotate the mode dial to v. v mode only allows you to record a high-speed video. 2 Press [Q], and then select a frame rate. Icon Descripion 440fps: Record 440 frames per second
(for up to 10 seconds). 250fps: Record 250 frames per second
(for up to 10 seconds). 30fps: Record 30 frames per second
(for up to 20 minutes). 30fps is not a high-speed recording option. 3 Press 4 Press
(Video recording) to start recording.
(Video recording) again to stop recording. Extended functions 53 Using the Movie mode Using the Smart Scene Detection mode In Smart Scene Detection mode, your camera automatically chooses the appropriate camera settings based on the scene it has detected. 1 Rotate the mode dial to v. 2 Press [m]. 3 Select V Smart Scene Detection On. 4 Press [m] to return to Shooting mode. 5 Align your subject in the frame. The camera automatically selects a scene. An appropriate scene icon will appear at the bottom left of the screen. Icon Description Landscapes Sunsets Blue skies Forested areas 6 Press 7 Press
(Video recording) to start recording.
(Video recording) again to stop recording. If the camera does not recognize an appropriate scene mode, it uses the default settings for the Smart Scene Detection mode. The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, and distance to the subject. Smart Filter effects are not available in Smart Scene Detection mode. Extended functions 54 Using the Creative Movie Maker mode In the Creative Movie Maker mode, you can easily make movies from the photos and videos stored on your memory card. Making a movie with the Creative Movie Maker 1 Rotate the mode dial to K. 2 Select + Movie Creation. 3 Select Select, and then select les. You must select at least 2 les. If you select a folder, every photo in the folder will be selected. If you select a video, every photo captured while recording the video will be selected. Select Shufe to let the camera select photos and videos randomly. The movie cannot exceed 2 minutes 30 seconds in length. You cannot select photos captured in Panorama mode, videos made in Creative Movie Maker mode, videos recorded with some Smart Filter effects (Miniature, Vignetting, Half Tone Dot, Sketch, or Fish-eye), or some high-speed videos (440fps). You can select up to 60 photos and 10 videos. 4 Press [f] to conrm the selection. 5 Press [t] to select Theme, and then select a theme. 6 Press [t] to select Music, and then select music. 7 Press [t] to select Movie Size, and then select a movie size. 8 Press [t] to select Creation, and then select Creation Select image Select Shufe Back Set Start. If your camera does not have enough available memory to store the movie, you cannot select Creation Start. Delete les from the memory card to make more memory available.
(p. 90) If the pop-up message appears when you select Creation Start, select a smaller movie size in the Movie Size option. The video rendering may take longer depending on the number and size of the selected les. Press [m] to cancel the video rendering. Extended functions 55 Using the Creative Movie Maker mode View a movie made in Creative Movie Maker mode 1 Rotate the mode dial to K. 2 Press [D/c] to select a movie. 3 Press [o] to play the movie. To view the movie in Playback mode, press [P]. (p. 85) Extended functions 56 Shooting options Learn how to set the options in Shooting mode. Selecting a resolution and quality 58 Selecting a resolution 58 Setting the photo quality 59 Using the timer 60 Shooting in the dark 61 Preventing red-eye 61 Using the ash 61 Adjusting the ISO sensitivity 63 Changing the cameras focus 64 Using macro 64 Using auto focus 64 Focusing on a selected area 66 Using tracking auto focus 66 Adjusting the focus area 67 Using Face Detection 68 Detecting faces 68 Capturing a self portrait shot 69 Capturing a smile shot 69 Detecting eye blinking 70 Using Smart Face Recognition 70 Registering faces as your favorites
(My Star) 71 Adjusting brightness and color 73 Adjusting the exposure manually (EV) 73 Changing the metering option 74 Selecting a White Balance setting 75 Using burst modes 78 Capturing photos in the High-speed burst mode 78 Capturing photos in the Precapture mode 79 Capturing bracketed photos 79 Applying effects/Adjusting images 81 Applying Smart Filter effects 81 Adjusting your photos 83 Selecting a resolution and quality Learn how to change the image resolution and quality settings. Selecting a resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the le size will also increase. S p A h M d s Setting the photo resolution 1 In Shooting mode, press [m]. 2 Select a Photo Size. 3 Select an option. Icon Description 4320X3240: Print on an A1 paper. 4320X2880: Print on an A2 paper in wide ratio (3:2). 3648X2736: Print on an A2 paper. 4320X2432: Print on an A2 paper in panorama ratio
(16:9) or play back on an HDTV. 2832X2832: Print on an A4 paper. 2592X1944: Print on an A4 paper. 1984X1488: Print on an A5 paper. 1920X1080: Print on an A5 paper in panorama ratio
(16:9) or play back on an HDTV. 1024X768: Attach to an email. S p A h M d s v Setting the video resolution 1 In Shooting mode, press [m]. 2 Select V Movie Size. 3 Select an option. Icon Description 1280X720: High-quality HD les to play back on an HDTV. 640X480: HD les to play back on an HDTV. 320X240: SD les to play back on an analog TV. If a memory card is not inserted, the camera supports only
. Shooting options 58 Selecting a resolution and quality p A h M d s Setting the photo quality Set the photo quality setting. Higher image quality settings will result in larger le sizes. The camera compresses and saves the photos you capture in the JPEG format. 1 In Shooting mode, press [m]. 2 Select a Quality. 3 Select an option. Icon Description Super Fine: Capture photos in super high quality. Fine: Capture photos in high quality. Normal: Capture photos in normal quality. Shooting options 59 Using the timer S p A h M d s v Learn how to set the timer to delay shooting. 1 In Shooting mode, press [t]. Timer : Off 2 Select an option. Icon Description Off: The timer is not active. 10 Sec: Capture a photo after a 10-second delay. 2 Sec: Capture a photo after a 2-second delay. 3 Press [Shutter] to start the timer. The AF-assist light/timer lamp blinks. The camera will automatically capture a photo after the specied time has elapsed. Press [Shutter] or [t] to cancel the timer. Depending on the Face Detection options you selected, the timer function may not be available. Shooting options 60 Shooting in the dark Learn how to capture photos at night or in low light conditions. p s Preventing red-eye If the ash res when you capture a photo of a person in the dark, a red glow may appear in the persons eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to ash options in Using the ash. S p A h M s Using the ash Use the ash when you capture photos in the dark or when you need more light in your photos. 1 In Shooting mode, press [F]. Flash : Auto S Before correction S After correction 2 Select an option. Icon Description Off:
The ash will not re. The camera will display the shake warning you are shooting in low light. when Auto: In Smart Auto mode, the camera will select a proper ash setting for the scene it detects. Auto: The ash will re automatically when the subject or background is dark. Shooting options 61 Shooting in the dark Icon Description Red-eye:
The ash will re twice when the subject or background is dark to reduce the red-eye effect. There is an interval between the 2 bursts of the ash. Do not move until the ash res a second time. Fill in:
The ash always res. The camera automatically adjusts light intensity. Slow Sync:
The ash res and the shutter stays open longer. This option is recommended when you want to capture more ambient light to reveal more details in the background. Use a tripod to prevent your photos from blurring. The camera will display the shake warning when you are shooting in low light. Red-eye Fix:
The ash res twice when the subject or background is dark. The camera corrects red-eyes through its advanced software analysis. There is an interval between the 2 bursts of the ash. Do not move until the ash res a second time. Available options may differ depending on the shooting conditions. Flash options are not available if you set Burst options or select Self-Portrait or Blink Detection. Make sure that your subjects are within the recommended distance from the ash. (p. 131) If light from the ash is reected or there is a substantial amount of dust in the air, tiny spots may appear in your photo. Adjusting the ash intensity Adjust the ash intensity to avoid over-exposed or under-exposed photos. 1 In Shooting mode, press [F]. 2 Scroll to an option. 3 Press [c]. Shooting options 62 Shooting in the dark 4 Rotate the navigation button or press [F/t] to adjust the intensity. Flash : Auto Flash Strength Back Set 5 Press [o] to save your settings. Adjusting the ash intensity may not be effective if:
- the subject is too close to the camera
- you set a high ISO sensitivity
- the exposure value is too big or too small In some shooting modes, you cannot use this function. p A h M Adjusting the ISO sensitivity The ISO sensitivity is the measure of a lms sensitivity to light as dened by the International Organization for Standardization (ISO). The higher ISO sensitivity you select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity to capture better photos and reduce camera shake when not using the ash. 1 In Shooting mode, press [m]. 2 Select a ISO. 3 Select an option. Select to use an appropriate ISO sensitivity based on the brightness of the subject and lighting. Higher ISO sensitivities may result in more image noise. Shooting options 63 Changing the cameras focus Learn how to adjust the cameras focus to suit the subject and the shooting conditions. p A h M d s v Using macro Use macro to capture close-up photos of subjects, such as owers or insects. p A h M d s v Using auto focus To capture sharp photos, select the appropriate focus option according to your distance from the subject. 1 In Shooting mode, press [c]. Focus : Auto Focus (Normal) Try to hold the camera rmly to prevent blurry photos. Turn off the ash if the distance to the subject is less than 16 in.
(40 cm) Shooting options 64 Changing the cameras focus 2 Select an option. Icon Description Auto Focus (Normal): Focus on a subject farther than 31 in. (80 cm) away. Farther than 138 in. (350 cm) away when you use the zoom. Manual Focus: Focus on a subject by adjusting the focus distance manually. (p. 64) Macro: Manually focus on a subject that is 2-31 in.
(5-80 cm) from the camera. 71-138 in. (180-350 cm) when you use the zoom. Auto Macro: Focus on a subject farther than 2 in.
(5 cm) away. Farther than 71 in. (180 cm) away when you use the zoom. Available options may differ depending on the shooting conditions. p A h M d s Adjusting the focus distance manually 1 In Shooting mode, press [c]. 2 Scroll to Manual Focus. 3 Press [c]. 4 Rotate the navigation button or press [F/t] to adjust the focus distance. Focus : Manual Focus Back Set 5 Press [o] to save your settings. When you adjust the focus distance manually and the subject is out of focus, the photo may become blurry. If you use this function, you cannot set focus area options and Face Detection options. Shooting options 65 Changing the cameras focus p A h M d s Focusing on a selected area You can focus on an area that you have selected. 1 In Shooting mode, press [m]. 2 Select a Focus Area Selection AF. 3 Press [m] to return to Shooting mode. 4 Press [o], and then rotate the navigation button or press [D/c/F/t] to move the frame to a desired area. p A h M d s Using tracking auto focus Tracking AF allows you to track and auto focus on your subject, even when you are moving. 1 In Shooting mode, press [m]. 2 Select a Focus Area Tracking AF. 3 Press [m] to return to Shooting mode. 4 Focus on the subject you want to track, and then press
[o]. A focus frame appears on the subject and follows the subject as you move the camera. Set 5 Press [o]. 6 Press [Shutter] to capture the photo. Press [o] to change the focus area. If you use this function, you cannot set Face Detection options, Burst options, Smart zoom options, and Smart Filter effects. The white frame means that your camera is tracking the subject. When you half-press [Shutter], the green frame means that your subject is in focus. 5 Press [Shutter] to capture the photo. Shooting options 66 Changing the cameras focus If you do not select a focus area, the focus frame will appear in the center of the screen. Tracking a subject may fail when:
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively When tracking a subject fails, the focus frame will appear as a white single-line frame (
). If the camera fails to track the subject, you must reselect the subject to track. If the camera fails to focus, the focus frame will change to a red single-line frame (
). If you use this function, you cannot set Face Detection options, Burst options, Smart zoom, and Smart Filter effects. p A h M d s Adjusting the focus area You can get clearer photos by selecting an appropriate focus area according to your subject's location in the scene. 1 In Shooting mode, press [m]. 2 Select a Focus Area. 3 Select an option. Icon Description Center AF: Focus on the center of the frame (suitable when subjects are located at or near the center). Multi AF: Focus on one or more of 9 possible areas. Selection AF: Focus on the area that you select. (p. 65) Tracking AF: Focus on and track the subject. (p. 65) Available shooting options may differ depending on the shooting mode. Shooting options 67 Using Face Detection p A h M d s If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them. When your camera detects a face, it tracks the detected face automatically. Face Detection may not be effective when:
- the subject is far from the camera (The focus frame will appear orange for Smile Shot and Blink Detection.)
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subjects facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable Face Detection is not available when you set Smart Filter effects, Image adjustment, Selection AF, Tracking AF, or Manual Focus. Depending on the shooting options you selected, available Face Detection options may differ. Depending on the Face Detection options you selected, the timer function may not be available. When you set Face Detection options, the AF area is automatically set to Multi AF. Depending on the Face Detection options you selected, Burst options may not be available. When you capture photos of detected faces, they will be registered in the face list. You can view registered faces in order of priority in Playback mode.
(p. 85) Even though faces are registered successfully, they may not be classied in Playback mode. A face detected in Shooting mode may not appear in the face list or Smart Album. Detecting faces Your camera automatically detects up to 10 human faces in one scene. 1 In Shooting mode, press [m]. 2 Select a Face Detection Normal. The face nearest the camera or nearest the center of the scene appears in a white focus frame and the rest of the faces appear in gray focus frames. The closer you are to the subjects, the quicker your camera will detect faces. If you have set Burst options, the camera may not register detected faces. Shooting options 68 Using Face Detection Capturing a self portrait shot Capture photos of yourself. The camera sets the focus distance to close-up, and then emits a beep when ready. 1 In Shooting mode, press [m]. 2 Select a Face Detection Self-Portrait. 3 Press [m] to return to Shooting mode. 4 Compose your shot with the lens facing you. 5 When you hear a quick beep, press [Shutter]. Capturing a smile shot The camera automatically releases the shutter when it detects a smiling face. 1 In Shooting mode, press [m]. 2 Select a Face Detection Smile Shot. 3 Press [m] to return to Shooting mode. 4 Compose your shot. The camera automatically releases the shutter when it detects a smiling face. When faces are located in the center, the camera beeps rapidly. If you turn Volume off in the sound settings, the camera will not emit a beep.
(p. 112) Shooting options 69 When your subject smiles broadly, your camera can detect the smile more easily. Using Face Detection Detecting eye blinking If your camera detects closed eyes, it will automatically capture 2 photos in succession. 1 In Shooting mode, press [m]. 2 Select a Face Detection Blink Detection. Hold your camera still while Capturing is displayed on the screen. If Blink Detection fails, the Picture taken with eyes closed. message appears. Capture another photo. Using Smart Face Recognition The camera automatically registers faces that you frequently photograph. The Smart Face Recognition feature will automatically prioritize the focus on those faces and on favorite faces. The Smart Face Recognition feature is available only when you use a memory card. 1 In Shooting mode, press [m]. 2 Select a Face Detection Smart Face Recognition.
: Faces that you have registered as favorites.
(To register faces as favorites, refer to page 70.)
: Faces that the camera has automatically registered. Shooting options 70 Using Face Detection The camera may recognize and register faces incorrectly depending on lighting conditions, drastic changes in the subject's pose or face, and whether or not the subject is wearing glasses. The camera can automatically register up to 12 faces. If the camera recognizes a new face when 12 faces have already been registered, it will replace the lowest priority face with the new one. Registering faces as your favorites (My Star) You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card. 1 In Shooting mode, press [m]. 2 Select a Smart FR Edit My Star. 3 Align your subjects face with the oval guideline, and then press [Shutter] to register the face. Set Capture photos of one person at a time when registering faces. Capture 5 photos of the subjects face for best results: one each from the front, left, right, above, and below. When capturing photos from the left, right, above, and below, instruct the subject not to turn his or her face more than 30 degrees. You can register a face even if you capture only one photo of the subject's face. Shooting options 71 Using Face Detection 4 When you are nished capturing the photos, the face list appears. Your favorite faces are indicated with a on the face list. You can register up to 8 favorite faces. The ash will not re when you register a favorite face. If you register the same face twice, you can delete one of the faces in the face list. Viewing your favorite faces 1 In Shooting mode, press [m]. 2 Select a Smart FR Edit Face List. To change the ranking of your favorite faces, press [f], and then select Edit Ranking. (p. 85) To delete a favorite face, press [f], and then select Delete. (p. 86) Shooting options 72 Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Adjusting the exposure manually (EV) p A h d v 3 Select a value to adjust the exposure. The photo will be brighter as the exposure value increases. Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. EV : 1 S Darker (-) S Neutral (0) S Brighter (+) 1 In Shooting mode, press [m]. 2 Select a or V EV. Back Set 4 Press [o] to save your settings. Once you adjust the exposure, the setting will be stored automatically. You may need to change the exposure value later to avoid overexposure or underexposure. If you cannot decide on an appropriate exposure, select the AE BKT
(Auto Exposure Bracket) option (p. 79), and then capture bracketed photos. The camera will capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. (p. 78) Shooting options 73 Adjusting brightness and color Changing the metering option p A h M d s v The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. 1 In Shooting mode, press [m]. 2 Select a or V Metering. 3 Select an option. Icon Description Multi:
Your camera divides the frame into several areas, and then measures the light intensity of each area. Suitable for general photos. Icon Description Spot:
Your camera measures only the light intensity at the very center of the frame. If a subject is not in the center of the frame, your photo may be improperly exposed. Suitable for a subject with backlighting. Center-weighted:
Your camera averages the meter reading of the entire frame with emphasis placed on the center. Suitable for photos with subjects in the center of the frame. Shooting options 74 Adjusting brightness and color Selecting a White Balance setting p A h M d v The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a White Balance setting that is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or Tungsten. Auto WB Daylight Cloudy Tungsten 1 In Shooting mode, press [m]. 2 Select a or V White Balance. 3 Select an option. Icon Description Auto WB: Automatically set the White Balance based on the lighting conditions. Daylight: For outdoor photos on a sunny day. Cloudy: For outdoor photos on a cloudy day or in shadows. Fluorescent_H: For shooting under a daylight uorescent or 3-way uorescent light. Fluorescent_L: For shooting under white uorescent light. Tungsten: For shooting indoor photos under incandescent bulbs or halogen lamps. Custom Set: To use White Balance settings that you dene. (p. 75) Color Temp.: To adjust the color temperature of the light source. (p. 76) Shooting options 75 Adjusting brightness and color Customizing preset White Balance options 1 In Shooting mode, press [m]. 2 Select a or V White Balance. 3 Scroll to a desired option. 4 Press [c]. 5 Press [D/c/F/t] to adjust the value on the coordinates. White Balance : Daylight G: Green A: Amber M: Magenta B: Blue Back Set 6 Press [o] to save your settings. Dening your own White Balance You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help you to match the colors in your photo with the actual scene. 1 In Shooting mode, press [m]. 2 Select a or V White Balance. 3 Scroll to Custom Set. 4 Aim the lens at a piece of white paper, and then press
[Shutter]. Shooting options 76 Adjusting brightness and color Adjusting color temperature 1 In Shooting mode, press [m]. 2 Select a or V White Balance. 3 Scroll to Color Temp.. 4 Press [c]. 5 Rotate the navigation button or press [F/t] to adjust the color temperature to match your light source. You can capture a warmer photo with a higher color temperature setting (more yellow/red), and a cooler photo with a lower color temperature setting (more blue). White Balance : Color Temp. Back Set 6 Press [o] to save your settings. Shooting options 77 Using burst modes p A h M It can be difcult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difcult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes. 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press and hold [Shutter]. While you are pressing [Shutter], the camera captures photos continuously. You can use the ash, Smart Zoom, Face Detection options, and Smart Filter options only when you select Single. It may take longer to save the photos depending on the memory card capacity and performance. The camera always displays captured photos before returning to Shooting mode. Capturing photos in the High-speed burst mode 1 In Shooting mode, press [Q]. 2 Select an option. Icon Description 10fps: Capture 10 photos per second continuously.
(You can capture up to 8 photos in one burst.) 5fps: Capture 5 photos per second continuously.
(You can capture up to 8 photos in one burst.) 3fps: Capture 3 photos per second continuously.
(You can capture up to 8 photos in one burst.) Single: Capture a single photo. Single is not a high-speed burst option. Shooting options 78 Using burst modes Capturing photos in the Precapture mode In Precapture mode, the camera starts shooting before you even press the shutter all the way down. If you do not want to miss the rst couple of important shots, simply use this mode and select the photo with the best results after shooting. 1 In Shooting mode, press [Q]. 2 Select Precapture. 3 Align your subject in the frame, and then half-press
[Shutter] to focus. The camera captures 7 photos continuously. If you release
[Shutter] too fast, the camera captures less than 7 photos. 4 Press [Shutter]. The camera capture the last photo and then saves all of the captured photos while you are half-pressing [Shutter]. If you do not press [Shutter] all the way down, the photos captured while you are half-pressing [Shutter] will not be saved. Capturing bracketed photos You can use the automatic bracketing feature to capture multiple photos of the same subject with different setting values slightly modied, such as exposure or white balance. 1 In Shooting mode, press [Q]. 2 Select Bracket. 3 Align your subject in the frame, and then half-press
[Shutter] to focus. 4 Press [Shutter]. The camera captures 3 photos continuously. Use a tripod to prevent blurry photos. Shooting options 79 Using burst modes Selecting a bracketing option 1 In Shooting mode, press [m]. 2 Select a Bracket. 3 Select a bracketing option. Icon Description WB BKT: Capture 3 photos with different white balance. AE BKT: Capture 3 photos with selected exposures. 4 Adjust the color for the selected light source
(white balance) or select an exposure value. 5 Press [o] to save your settings. Shooting options 80 Applying effects/Adjusting images Applying Smart Filter effects Apply various lter effects to your photos and videos to create unique images. p A h M v Available lters in Program, Aperture Priority, Shutter Priority, and Manual modes Icon Description Normal: No effect Miniature Vignetting Sketch Fish-eye 1 In Shooting mode, press [m]. 2 Select a or V Smart Filter. 3 Select an effect. Miniature: Apply a tilt-shift effect to make the subject appear in miniature. Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Soft Focus: Hide facial imperfections or apply dreamy effects. Old Film: Apply a vintage lm effect. Half Tone Dot: Apply a halftone effect. Sketch: Apply a pen sketch effect. Fish-eye: Distort close objects to imitate the visual effect of a sheye lens. Classic: Apply a black and white effect. Retro: Apply a sepia tone effect. Oil Painting: Apply an oil painting effect. Cartoon: Apply a cartoon painting effect. Shooting options 81 Applying effects/Adjusting images Icon Description Icon Description Ink Painting: Apply a watercolor painting effect. Sketch: Apply a pen sketch effect. Cross Filter: Add lines that radiate outward from bright objects to imitate the visual effect of a cross lter. Fish-eye: Distort close objects to imitate the visual effect of a sheye lens. Classic: Apply a black and white effect. Retro: Apply a sepia tone effect. If you select Miniature when recording a video, the miniature recording time is displayed with the Miniature icon and is shorter than the real recording time. If you select Miniature when recording a video, you cannot record the video sound or capture still images while recording a video. If you select Miniature, Vignetting, Half Tone Dot, Sketch, or Fish-eye while recording a video, the recording speed will be set to and the recording resolution will be set to
. If you select Sketch, Oil Painting, Cartoon, Ink Painting, or Cross Filter when capturing a photo, the photo size will automatically change to and below. If you set Smart Filter effects, you cannot set Smart Zoom, Face Recognition options, Image Adjustment options, Burst options, Tracking AF, or Selection AF. Available lters in Movie mode Icon Description Normal: No effect Palette Effect 1: Create a vivid look with sharp contrast and strong color. Palette Effect 2: Make scenes clean and clear. Palette Effect 3: Apply a soft brown tone. Palette Effect 4: Create a cold and monotone effect. Miniature: Apply a tilt-shift effect to make the subject appear in miniature. Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Half Tone Dot: Apply a halftone effect. Shooting options 82 Applying effects/Adjusting images p A h M Adjusting your photos Adjust the sharpness, saturation, or contrast of your photos. 1 In Shooting mode, press [m]. 2 Select a Image Adjust. 3 Select an option. Contrast Sharpness Saturation Image Adjust : Contrast Contrast Sharpness Saturation Back Set 4 Rotate the navigation button or press [F/t] to adjust each value. Contrast
-
+
Sharpness
-
+
Description Decrease the color and brightness. Increase the color and brightness. Description Soften the edges on your photos (suitable for editing the photos on your computer). Sharpen the edges to improve the clarity of your photos. This may also increase the noise in your photos.
-
+
Saturation Description Decrease the saturation. Increase the saturation. 5 Press [o] to save your settings. Select 0 if you do not want to apply any effects (suitable for printing). If you set adjustment functions, you cannot use Smart Filter options and Face Detection options. Shooting options 83 Playback/Editing Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV, HDTV, or 3D TV. Viewing photos or videos in Playback mode 85 Starting Playback mode 85 Viewing photos 91 Playing a video 94 Editing a photo 96 Resizing photos 96 Rotating a photo 96 Applying Smart Filter effects 97 Adjusting your photos 98 Creating a print order (DPOF) 99 Viewing les on a TV, HDTV, or 3D TV 101 Transferring les to your Windows computer 102 Transferring les with Intelli-studio 103 Transferring les by connecting the camera as a removable disk 105 Disconnecting the camera
(for Windows XP) 106 Transferring les to your Mac computer 107 Printing photos with a PictBridge photo printer 108 Viewing photos or videos in Playback mode Learn how to play back photos or videos and how to manage les. Starting Playback mode View photos or play videos stored in your camera. 1 Press [P]. Photo le information The most recent le will be displayed. If the camera is off, it will turn on and display the most recent le. 2 Rotate the navigation button or press [F/t] to scroll through les. Press and hold [F/t] to scroll through les quickly. Histogram File Information Memory in use If you want to view les stored in the internal memory, remove your memory card. The camera will not properly play back les of unsupported sizes or les that were captured with other cameras. Icon Description Folder nameFile name Photo captured in 3D Photo mode Photo captured in a High-speed burst mode or in Precapture mode (See Viewing les as a folder, p. 86) Protected le Print order has been set (DPOF) Photo includes a registered face (Available only when you use a memory card.) To display le information on the screen, press [D]. Playback/Editing 85 Viewing photos or videos in Playback mode Video le information Play Capture Icon Description Folder name-File name Current playback time Video length V Video le Video includes images captured while recording Video made in Creative Movie Maker mode Protected le Image captured while recording a video Ranking your favorite faces You can rank your favorite faces. The favorite face feature is available only when you insert a memory card into the camera. 1 In Playback mode, press [m]. 2 Select O Face List Edit Edit Ranking. 3 Select a face from the list, and then press [o]. Face List Back Set 4 Rotate the navigation button or press [D/c] to change the ranking of the face, and then press [f]. Playback/Editing 86 Viewing photos or videos in Playback mode Deleting favorite faces You can delete your favorite faces. The favorite face feature is available only when you insert a memory card into the camera. 1 In Playback mode, press [m]. 2 Select O Face List Edit Delete. 3 Select a face, and then press [o]. 4 Press [f]. 5 When the pop-up message appears, select Yes. Viewing les as a folder Photos captured in a High-speed burst mode or in Precapture mode appear as a folder. 1 In Playback mode, rotate the navigation button or press
[F/t] to scroll to a desired folder. The camera will automatically play back photos in the folder. OK : Single View 2 Press [o] to open the folder. 3 Rotate the navigation button or press [F/t] to scroll through the les. 4 Press [o] to return to Playback mode. You cannot edit a photo while viewing a folder. To edit a photo in a folder, press [o] to open the folder, and then scroll to the photo. Playback/Editing 87 Viewing photos or videos in Playback mode Viewing les by category in Smart Album View les by category, such as date, face, or le type. 1 In Playback mode, rotate [Zoom] to the left. 2 Press [m]. 3 Select a category. 4 Rotate the navigation button or press [F/t] to scroll through the les. Press and hold [F/t] to scroll through les quickly. 5 Press [o] to return to the normal view. It may take some time for the camera to open Smart Album, change the category, or reorganize les. Type Date Week Face Back Set Option Type Date Week Face Description View les by the le type. View les by the date they were saved. View les by the day of the week they were saved. View les by recognized faces and favorite faces.
(Up to 20 people) Playback/Editing 88 Viewing photos or videos in Playback mode Viewing les as thumbnails Scan thumbnails of les. In Playback mode, rotate [Zoom] to the left to view thumbnails (3 at a time). Rotate [Zoom] to the left once or twice more to display more thumbnails (9 or 20 at a time). Rotate [Zoom] to the right to return to the previous view. Protecting les Protect your les from accidental deletion. 1 In Playback mode, press [m]. 2 Select O Protect Select. To protect all les, select All Lock. 3 Scroll to the le you want to protect, and then press
[o]. Press [o] again to cancel your selection. Protected le icon 1 14 25 1 Filter To Scroll through les Delete les Description Rotate the navigation button or press
[D/c/F/t]. Press [f], and then select Yes. When you scroll to a video le or folder in the thumbnails view, the camera will automatically play back the video or the photos in the folder. Select Set 4 Press [f]. You cannot delete or rotate a protected le. Playback/Editing 89 Viewing photos or videos in Playback mode Deleting les Select les to delete in Playback mode. Deleting a single le You can select one le, and then delete it. 1 In Playback mode, select a le, and then press [f]. 2 When the pop-up message appears, select Yes. When viewing les in Smart Album or thumbnails view, press [f] to delete a le. While viewing les as a folder, press [f] to delete all photos in the To delete a specic photo in a folder, open the folder, select a le, folder. and then press [f]. Deleting multiple les You can select multiple les, and then delete them at once. 1 In Playback mode, press [f]. 2 When the pop-up message appears, select Multiple Delete. You can also delete multiple les in Playback mode by pressing [m], and then selecting O Delete Select. 3 Scroll to each le you want to delete, and then press
[o]. Press [o] again to cancel your selection. 4 Press [f]. 5 When the pop-up message appears, select Yes. Playback/Editing 90 Viewing photos or videos in Playback mode Deleting all les You can select all les, and then delete them at once. 1 In Playback mode, press [m]. 2 Select O Delete All. 3 When the pop-up message appears, select Yes. All unprotected les are deleted. Copying les to a memory card Copy les from the internal memory to a memory card. 1 In Playback mode, press [m]. 2 Select O Copy to Card. 3 Select Yes. Viewing photos Enlarge part of a photo or view photos as a slide show. Enlarging a photo In Playback mode, rotate [Zoom] to the right to enlarge a portion of the photo. Rotate [Zoom] to the left to zoom out. Enlarged area Zoom ratio (The maximum zoom ratio differs depending on the photo resolution.) Trim Playback/Editing 91 Viewing photos or videos in Playback mode To Move the enlarged area Trim the enlarged photo Description Rotate the navigation button or press
[D/c/F/t]. Press [o], and then select Yes.
(The trimmed photo will be saved as a new le. The original photo is retained in its original form.) When you view photos that were captured by another camera, the zoom ratio may differ. Viewing panoramic photos View photos captured in Panorama mode. 1 In Playback mode, rotate the navigation button or press
[F/t] to scroll to a desired panoramic photo. The entire panoramic photo appears on the screen. 2 Press [o]. The camera automatically scrolls through the photo horizontally or vertically, depending on the direction you moved when capturing the photo. The camera then switches to Playback mode. While playing back a panoramic photo, press [o] to pause or resume. After you have paused the playback of a panoramic photo, press [D/c/F/t] to move the photo horizontally or vertically, depending on the direction you moved when capturing the photo. 3 Press [m] to return to Playback mode. The camera automatically scrolls through the panoramic photo only if the longest side of the photo is two or more times longer than the shortest side. On your cameras display, a photo captured in 3D Panorama mode appears as a 2D panoramic photo. To see the 3D effect, connect your camera to a 3D TV or 3D monitor. (p. 102) Playback/Editing 92 Viewing photos or videos in Playback mode Playing a slide show Apply effects and audio to a slide show of your photos. The slide show function does not work for videos. 1 In Playback mode, press [m]. 2 Select 3 Select a slide show effect option. Skip to step 4 to start a slide show with no effects.
* Default Option Start Images Description Set whether or not to repeat the slide show.
(Play, Repeat) Set the photos you want to view as a slide show. All*: View all photos in a slide show. Date: View photos captured on a specic date in a slide show. Select: View selected photos in a slide show. Set the interval between photos.
(1 sec*, 3 sec, 5 sec, 10 sec) You must set the Effect option to Off to set the Interval interval.
* Default Option Effect Description Set a scene change effect between photos.
(Off*, Calm, Shine, Relax, Lively, Sweet) Select Off to cancel effects. When you use the Effect option, the interval between photos will be set to 3 seconds. Music Set background audio. 4 Select Start Play. Select Repeat to loop the slide show. 5 View the slide show. Press [o] to pause the slide show. Press [o] again to resume the slide show. Press [o], and then press [F/t] to stop the slide show and return to Playback mode. Playback/Editing 93 Trimming a video 1 While viewing a video, press [o] at the point where you want the trimming to begin. 2 Rotate [Zoom] to the right, and then press [o]. 3 Press [o] at the point where you want the trimming to end. 4 Rotate [Zoom] to the right. 5 When the pop-up message appears, select Yes. The original video should be at least 10 seconds long. The camera will save the edited video as a new le and leave the original video intact. Viewing photos or videos in Playback mode Playing a video In Playback mode, you can view a video, and then capture or trim parts of the playing video. You can save the captured or trimmed segments as new les. 1 In Playback mode, select a video, and then press [o]. 2 View the video. Current playback time/
Video length Pause Stop To Scan backward Pause or resume playback Scan forward Adjust the volume level Description Press [F]. Each time you press [F], you change the scan speed in this order: 2X, 4X, 8X. Press [o]. Press [t]. Each time you press [t], you change the scan speed in this order: 2X, 4X, 8X. Rotate [Zoom] to the left or right. Playback/Editing 94 Viewing photos or videos in Playback mode Capturing an image from video 1 While viewing a video, press [o] at the point where you want to capture an image. 2 Press [c]. The resolution of the captured image will be the same as the original video. The captured image is saved as a new le. Playback/Editing 95 Editing a photo Learn how to edit photos. The camera will save edited photos as new les. When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower resolution. Resizing photos Change the size of a photo and save it as a new le. 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Resize. 3 Select an option. Rotating a photo 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Rotate. 3 Select an option. Rotate : Right 90 Resize Rotate Smart Filter Image Adjust 2592X1944 1984X1488 1024X768 Back Set Available resize options differ depending on the original size of the photo. Back Set The camera will overwrite the original le. Playback/Editing 96 Editing a photo Applying Smart Filter effects Apply special effects to your photos. 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Smart Filter. 3 Select an effect. Smart Filter : Normal Back Set Icon Description Normal: No effect Miniature: Apply a tilt-shift effect to make the subject appear in miniature. Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Soft Focus: Hide facial imperfections or apply dreamy effects. Icon Description Old Film: Apply a vintage lm effect. Half Tone Dot: Apply a halftone effect. Sketch: Apply a pen sketch effect. Fish-eye: Distort close objects to imitate the visual effect of a sheye lens. Classic: Apply a black and white effect. Retro: Apply a sepia tone effect. Oil Painting: Apply an oil painting effect. Cartoon: Apply a cartoon painting effect. Ink Painting: Apply a watercolor painting effect. Cross Filter: Add lines that radiate outward from bright objects to imitate the visual effect of a cross lter. Zooming Shot: Blur the edges of a photo to emphasize the subjects in the center. Playback/Editing 97 Editing a photo Adjusting your photos Learn how to correct red-eye, adjust the skin tone, and adjust the brightness, contrast, or saturation. The camera will save an edited photo as a new le, but may convert it to a lower resolution. Removing red-eye 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Image Adjust Red-eye Fix. 3 Press [o] to save your settings. Retouching faces 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Image Adjust Face Retouch. 3 Press [c]. 4 Rotate the navigation button or press [F/t] to adjust the skin tone. As the number increases, the skin tone becomes brighter. 5 Press [o] to save your settings. Playback/Editing 98 Editing a photo Adjusting brightness, contrast, or saturation 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Image Adjust. 3 Select an adjusting option. Icon Description Brightness Contrast Saturation 4 Press [c]. 5 Rotate the navigation button or press [F/t] to adjust the option. 6 Press [o] to save your settings. Adding noise to the photo 1 In Playback mode, select a photo, and then press
[m]. 2 Select e Image Adjust Add Noise. 3 Press [o] to save. Creating a print order (DPOF) Select photos to print and save print options in the Digital Print Order Format (DPOF). This information is saved in the MISC folder on your memory card for convenient printing on DPOF-
compatible printers. 1 In Playback mode, press [m]. 2 Select O DPOF Standard Select. Select All to print all photos. Playback/Editing 99 Editing a photo 3 Scroll to a photo you want to print, rotate [Zoom] to the left or right to select the number of copies, and then press [f]. If you select All, press [D/c] to select the number of copies, and then press [o]. 4 Press [m]. 5 Select O DPOF Size Select. Select All to choose the print size for all photos. 6 Scroll to a photo you want to print, rotate [Zoom] to the left or right to select the print size, and then press [f]. If you select All, press [D/c] to select the print size, and then press [o]. Printing photos as thumbnails Print photos as thumbnails to check all the photos at once. 1 In Playback mode, press [m]. 2 Select O DPOF Index. 3 When the pop-up message appears, select Yes. You can take the memory card to a print shop that supports DPOF
(Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. Photos with dimensions that are wider than the paper may be cut off on the left and right edges. Ensure that your photo dimensions are compatible with the paper you select. You cannot set DPOF options for photos stored in the internal memory. If you specify the print size, you can print photos only with DPOF 1.1-compatible printers. Playback/Editing 100 Viewing les on a TV, HDTV, or 3D TV Play back photos or videos by connecting your camera to a TV with the A/V cable. 1 In Shooting or Playback mode, press [m]. 2 Select n Video Out. 3 Select the video signal output for your country or region.
(p. 115) 4 Turn off your camera and TV. 5 Connect your camera to your TV with the A/V cable. Audio Video 6 Turn on your TV, and then select the A/V video source with the TV remote control. 7 Turn on your camera. The camera automatically enters into Playback mode when you connect it to a TV. 8 View photos or play videos using the camera buttons. Depending on the TV model, you may see some digital noise or part of an image may not appear. Images may not be centered on the TV screen depending on your TV settings. Playback/Editing 101 Transferring les to your Windows computer Transfer les to your Windows computer, edit them with Intelli-studio, and upload them to the web. The requirements are recommendation only. Intelli-studio may not work properly even when the computer meets the requirements, depending on the condition of your computer. If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. Install DirectX 9.0c or above before you use Intelli-studio. Your computer must be running Windows XP, Windows Vista, or Windows 7 for you to connect the camera as a removable disk. The manufacturer is not responsible for any damage that results from using unqualied computers such as a computer you assembled yourself. Requirements Item CPU RAM OS*
Hard disk capacity Others Requirements Intel Core 2 Duo 1.66 GHz or higher/
AMD Athlon X2 Dual-Core 2.2 GHz or higher Minimum 512 MB RAM (1 GB or more recommended) Windows XP SP2, Windows Vista, or Windows 7
(32-bit editions) 250 MB or more (1 GB and above recommended) CD-ROM drive 1024 X 768 pixels, 16-bit color display compatible monitor (1280 X 1024 pixels, 32-bit color display recommended) USB 2.0 port nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher Microsoft DirectX 9.0c or higher
* The programs may not work properly on 64-bit editions of Windows XP, Windows Vista, and Windows 7. Playback/Editing 102 Transferring les to your Windows computer Transferring les with Intelli-studio Intelli-studio will start automatically when you connect the camera to your computer with the USB cable. 5 Turn on the camera. The computer recognizes the camera automatically and Intelli-studio launches automatically. The battery will charge while the camera is connected to a computer with the USB cable. If you set the USB option to Select, select Computer in the pop-up window. 1 In Shooting or Playback mode, press [m]. 2 Select n PC Software On. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data. 6 Select a destination folder on your computer, and then select Yes. New les stored on the camera will automatically transfer to the selected folder. If your camera has no new les, the pop-up window for saving new les will not appear. For Windows Vista and Windows 7, select Run iStudio.exe from the Auto Play window to start Intelli-studio. Playback/Editing 103 Transferring les to your Windows computer Using Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit les. For details, select Help Help from the program toolbar. You can update the rmware of your camera by selecting Web Support Upgrade rmware for the connected device from the program toolbar. If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool Install Intelli-studio on PC. You cannot edit les directly on the camera. Transfer les to a folder on your computer before editing. Intelli-studio supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG)
- Photos: JPG, GIF, BMP, PNG, TIFF 1 2 3 4 5
:
$
#
@
6 7 8 9 0
!
Playback/Editing 104 Transferring les to your Windows computer No. Description 1 Open menus. 2 Display les in the selected folder. 3 Switch to the Photo edit mode. 4 Switch to the Video edit mode. 5 Switch to the Sharing mode (to send les by email or upload les to websites, such as Flickr or YouTube). 6 Enlarge or reduce the thumbnails in the list. 7 Select a le type. 8 View les in the selected folder on your computer. 9 Show or hide les on the connected camera. 0 View les in the selected folder on the camera.
! View les as thumbnails or on a map.
@ Browse folders stored on the camera.
# Browse folders stored on your computer.
$ Move to the previous or next folder.
: Print les, view les on a map, store les in My Folder, or register faces. Transferring les by connecting the camera as a removable disk Connect the camera to your computer as a removable disk. 1 In Shooting or Playback mode, press [m]. 2 Select n PC Software Off. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data. Playback/Editing 105 Transferring les to your Windows computer 5 Turn on the camera. The computer recognizes the camera automatically. If you set the USB option to Select, select Computer in the pop-up window. 6 On your computer, select My Computer Removable Disk DCIM 100PHOTO. 7 Drag or save les to your computer. Disconnecting the camera (for Windows XP) With Windows Vista and Windows 7, the methods for disconnecting the camera are similar. 1 If the status lamp on your camera is blinking, wait until it stops. 2 Click on the tool bar at the bottom right of your computer screen. 3 Click the pop-up message. 4 Click the message box that indicates the camera can be removed safely. 5 Remove the USB cable. The camera may not disconnect safely while Intelli-studio is running. End the program before disconnecting the camera. Playback/Editing 106 Transferring les to your Mac computer When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer les directly from the camera to the computer without installing any programs. Mac OS 10.4 or later is supported. 1 Connect your camera to a Macintosh computer with the 2 Turn on the camera. USB cable. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data. The computer recognizes the camera automatically and displays a removable disk icon. If you set the USB option to Select, select Computer in the pop-up window. 3 Double-click the removable disk icon. 4 Drag or save les to your computer. Playback/Editing 107 Printing photos with a PictBridge photo printer Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer. 1 In Shooting or Playback mode, press [m]. 2 Select n USB Printer. 3 Turn on the printer, and then connect your camera to the Conguring print settings Press [m] to congure print settings. printer with the USB cable. 4 If the camera is off, press [POWER] or [P] to turn it on. The printer recognizes the camera automatically. 5 Press [F/t] to select a le to print. Press [m] to set printing options. See Conguring print settings. 6 Press [o] to print. Printing starts. Press [F] to cancel printing. Images Size Layout Type Quality Date File Name One Photo Auto Auto Auto Auto Auto Auto Exit Print Option Images Size Layout Type Quality Date File Name Reset Description Select whether to print the current photo or all photos. Set the print size. Set the number of photos to be printed on a single sheet of paper. Set the type of paper. Set the print quality. Set to print the date. Set to print the le name. Reset settings to their default values. Some options may not be supported by some printers. Playback/Editing 108 Wireless network Learn to connect to wireless local area networks (WLANs) and use functions. Sending or receiving photos or videos with another camera 123 Sending photos or videos to another camera 123 Receiving photos or videos from another camera 123 Using Auto Backup to send photos or videos 125 Installing the program for Auto Backup on your PC 125 Sending photos or videos to a PC 125 Sending photos or videos to a Blu-ray disc Player 126 About the Wakeup on LAN (WOL) feature 127 Connecting to a WLAN and conguring network settings 110 Connecting to a WLAN 110 Setting network options 111 Manually setting the IP address 111 Network connection tips 112 Sending photos via email 113 Changing email settings 113 Sending photos via email 115 Entering text 116 Using photo or video sharing websites 117 Accessing a website 117 Uploading photos or videos 117 Using a smart phone as a remote shutter release 118 Viewing photos or videos on a AllShare-enabled TV 120 Viewing photos or videos on a TV I 120 Viewing photos or videos on a TV II 122 Connecting to a WLAN and conguring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also congure network settings. Connecting to a WLAN 1 On the Home screen, touch 2 Touch
.
, or
. The camera automatically searches for available AP devices. 3 Touch an AP. AP Setting Samsung 1 Samsung 2 Samsung 3 Samsung 4 Samsung 5 Icon Description Ad hoc AP Secured AP WPS AP Signal strength AP setting options Connecting WPS AP Refreshing connectable APs When you select a secured AP, a pop-up window appears. Input the required passwords to connect to the WLAN
(for information about entering text, refer to page 114). When you select an unsecured AP, the camera will connect to the WLAN. If you select a WPS prole supported AP, touch WPS PIN, and then enter a PIN on the AP device. You can also connect to a WPS prole supported AP by touching WPS PBC on the camera, and then pressing WPS button on the AP device. Wireless network 110 Connecting to a WLAN and conguring network settings Setting network options 1 On the Home screen, touch 2 Touch
.
, or
. The camera automatically searches for available AP devices. 3 Touch 4 Touch each option and enter the required information. next to an AP. Option Authentication Data Encryption Network Key IP Setting Description Select a network authentication type. Select an encryption type. Enter the network key. Set the IP address manually. 5 When you are nished, touch o. Manually setting the IP address 1 On the Home screen, touch 2 Touch or
,
. The camera automatically searches for available AP devices. next to an AP to change settings. 3 Touch 4 Touch IP Setting Manual. 5 Touch each option and enter the required information. Option IP Subnet Mask Gateway DNS Server Description Enter the static IP address. Enter the subnet mask. Enter the gateway. Enter the DNS address. 6 Touch o to save your changes. Wireless network 111 Connecting to a WLAN and conguring network settings Network connection tips The quality of the network connection will be determined by the AP. The further the distance between your camera and the AP, the longer it will take to connect to the network. If a nearby device is using the same radio frequency signal as your camera, it may interrupt your connection. If your AP name is not in English, the camera may not be able to locate the device or the name may appear incorrectly. For network settings or a password, contact your network administrator or network service provider. If a WLAN requires authentication from the service provider, you may not be able to connect to it. To connect the WLAN, contact your network service provider. Depending on the encryption type, the number of digits in the password may differ. A WLAN connection may not be possible in all surroundings. The camera may display a WLAN-enabled printer may be shown on the AP lists. However, you cannot connect to the network via a printer. You cannot connect your camera to a network and a TV simultaneously. Also, you cannot view photos or videos on a TV while connected to a network. Connecting to a network may incur additional charges. Costs will vary based on the conditions of your contract. You can use only free WLANs with your camera. If you use free WLANs that require a user agreement and additional information when you connect to a web browser, some features may be limited when connecting to websites or sending email. Available network connections may differ by country. The WLAN feature of your camera must comply with radio transmission laws in your region. To ensure compliance, use the WLAN feature only in the country where you purchased the camera. For network proles and a password, contact your network administrator or network service provider. The process for adjusting network settings may differ, depending on network conditions. Do not access a network that you are not authorized to use. Before you connect to a network, ensure your battery is fully charged. When a DHCP server is not available you must make an autoip. txt le and copy it to the inserted memory card to connect to the network using Auto IP. Wireless network 112 Sending photos via email You can change settings in the email menu, and send photos stored on the camera via email. Changing email settings In the email menu, you can change settings for storing your information or saving email addresses. You can also set or change the email password. See p. 114 for information about entering text. Storing your information 1 On the Home screen, touch 2 Touch m User Setting. 3 Touch the Name box, input your name, and then touch
. o. User Setting Name Email Touch Touch 4 Touch the Email box, input your email address, and then touch o. 5 Touch o to save your changes. To delete your information, touch
. Saving email addresses 1 On the Home screen, touch 2 Touch m Email Address. 3 Touch
. to open the email address. Email Address Book Wireless network 113 Sending photos via email 4 Touch the Name box, input a name, and then touch o. 5 Touch the Email box, input an email address, and then touch o. 6 Touch o to save the new email address. Touch Touch to add an address. to delete the address from the list. Setting an email password 1 On the Home screen, touch 2 Touch m, and then touch the setting button
. next to Setting Password. 3 When the pop-up appears, touch Conrm. 4 Enter a 4-digits password. 5 Enter the password again. 6 When the pop-up appears, touch Conrm. Changing the email password 1 On the Home screen, touch
. 2 Touch m Change Password. 3 Enter your current 4-digit password. 4 Enter a new 4-digit password. 5 Enter the new password again. 6 When the pop-up appears, touch Conrm. If you do not want to use a password to access email options, touch the setting button next to Setting Password to deactivate it. Wireless network 114 Sending photos via email Sending photos via email You can send photos stored on the camera via email. See p. 114 for information about entering text. 1 On the Home screen, touch 2 Touch the Sender box, input your email address, and
. then touch o. If you have previously saved your information, it will be inserted automatically. (p. 111) 3 Touch the Receiver box, input an email address, and then touch o. Touch Touch the Touch box to add additional recipients. You can to use an address from your address book. (p. 111) input up to 10 recipients. Touch to delete an address from the list. 4 Touch o. 5 Select photos to send, and then touch o. You can select up to 20 photos. The total size must be 10 MB or less. 6 Touch the Text box, input your comments, and then touch o. For information about entering text, refer to page 114. 7 Touch Send to connect to the network and send the photos. The camera will automatically attempt to connect to a WLAN via the most recently connected AP device and send the photo. If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 108) Wireless network 115 Sending photos via email You may not be able to send an email if no network connection is available or if your email account settings are incorrect. The camera will display the Transfer completed. message, even when the photos cannot be sent or will be recognized as spam due to an error with the recipients email account. The maximum photo resolution you can send is photo with resolution that is higher than resized. If you select a
, it will be automatically If you cannot send an email because of rewall or user authentication settings, contact your network administrator or network service provider. When there are no photos in the camera memory, you cannot use this feature. Entering text Learn how to enter text. The icons in the table below let you move the cursor, change the case, etc. Text Input Icon Description Move the cursor. In ABC mode, change the case. In 123 mode, view more symbols. Switch to ABC mode. Enter ".com". Enter a space. Delete the last letter. Switch to 123 mode. o Save the displayed text. You can enter only English alphabets, regardless of the display language. Wireless network 116 Using photo or video sharing websites Upload your photos or videos to le sharing websites. Available websites will be displayed on your camera. Accessing a website 1 On the Home screen, touch 2 Select a website. The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 108) 3 Input your ID and password, and then touch Login. You may be logged in automatically, if you have previously logged in to the website. You must have an existing account on the le sharing website to use this feature. Uploading photos or videos 1 Access the website with your camera, and then touch Upload. 2 Select les to upload from the list, and then touch o. You can select up to 20 photos and the total size must be 10 MB or less. 3 Touch the Comment box, input your comments, and then touch o. 4 Touch Upload. The maximum photo resolution you can upload is
, and the longest video you can upload is 30 seconds at 320 resolution or a video recorded using
. If the selected photo resolution is higher than it will be automatically resized to a lower resolution. The method of uploading photos or videos may differ depending on
, the selected website. If you cannot access a website because of rewall or user authentication settings, contact your network administrator or network service provider. If you are unable to upload photos or videos due to server errors, touch Retry. Uploaded photos or videos may be automatically titled with the date they were captured. The speed of your internet connection may affect how quickly photos upload or web pages open. Wireless network 117 Using a smart phone as a remote shutter release The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewnder feature. The captured photo will display on the smart phone. This feature is supported only by Galaxy S smart phones with the Android 2.2 OS or higher. If your smart phone uses the Android 2.1 OS, upgrade your smart phone to Android 2.2. This feature is also supported by 7 inch. Galaxy Tab and iPhone 4 with the iOS 4.3. You can download the application from Samsung Apps, Android market, or Apple App Store. 1 On your smart phone, turn on the Remote Viewnder application. If you are using an iPhone, activate Personal Hotspot before using the application. 2 On the Home screen of the camera, touch 3 Select your smart phone from the list of available devices
. found by the camera. If the smart phone connected to the camera recently, it will reconnect to the camera automatically. You can choose only one camera at a time. If you are using an iPhone, enter your password. 4 On the smart phone, set the following shooting options. Icon Description Flash option Timer option Photo size While using this feature, only the touch screen and [POWER]
are available on your camera. The zoom button and the shutter button on your smart phone will not function when using this feature. Remote Viewnder mode supports the and photo sizes only. 5 On the smart phone, touch and hold The focus is automatically set to multi-AF. 6 Release to capture the photo. to focus. The photo will be saved in your camera. Touch the photo in the bottom right corner of the screen to save it to the smart phone. The photo will be resized to VGA (640x480) size. Wireless network 118 Using a smart phone as a remote shutter release When you use this feature, the ideal distance between the camera and the smart phone may vary, depending on your surroundings. The smart phone must be within 30 ft/10 m of the camera to use this feature. It will take some time to capture the photo after you release on the smart phone. The Remote Viewnder function will deactivate when:
- there is an incoming call on the smart phone
- either of the camera or the smart phone turn off
- memory is full
- either device loses connection to the WLAN
- the Wi-Fi connection is poor or unstable To rotate the scene by rotating the smart phone, turn on the rotation feature on your smart phone. When you take a self image shot, the display will show a reected image, just like a mirror. Wireless network 119 Viewing photos or videos on a AllShare-enabled TV AllShare is an international technology standard for sharing media les between networked devices in your home. With this technology, you can view your photos or videos on a widescreen TV. You cannot send or receive voice memos. 4 On the TV, search for the camera and browse the shared photos or videos. For information about searching for the camera and browsing the photos or videos on the TV, refer to the TV user manual. Videos may not play smoothly depending on the type of TV or network condition. (p. 55) If this happens, re-record the video in 640 or 320 quality and play it again. If videos do not play smoothly on your TV over the wireless connection, try connecting the camera to the TV with an A/V cable. Viewing photos or videos on a TV I View your photos or videos on a TV that supports the AllShare function. Your camera acts as a server and you can search for shared photos or videos with the TV remote control. 1 On the Home screen, touch 2 Touch Broadcast les. The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. If the camera has not previously been connected to a WLAN, it wil search for available AP devices. (p. 108) To store your camera's name, in AllShare mode, touch m
Device Name, and then input a name by touching the Device Name box. 3 Connect your TV to a wireless network via an AP device. Refer to your TVs user manual for more information. AP Wireless network 120 Viewing photos or videos on a AllShare-enabled TV You can share up to 1,000 photos. On a TV screen, you can view only photos or videos captured with your camera. The range of the wireless connection between your camera and a TV may vary depending on the specications of the AP. If the camera is connected to 2 TVs, playback may be slower. Photos will be shared according to the size you set. Videos will be shared in their original sizes. You can use this feature only with AllShare-enabled TVs. Shared photos or videos will not be stored on the TV, but they can be stored according to the TV specications. Transferring photos or videos to the TV may take some time depending on the network connection, the number of les to be shared, or sizes of the les. If you power off the camera abnormally while viewing photos or videos on a TV (for example, by removing the battery), the TV considers the camera to still be connected. The order of photos or videos on the camera may be different than on the TV. Depending on the number of photos or videos you want to share, it may take some time to load your photos or videos and complete the initial set-up process. While viewing photos or videos on the TV, continuously using the TV remote or performing additional operations on the TV may prevent this feature from working properly. If you reorder or sort les on the camera while viewing them on a TV, you must repeat the initial set-up process to update the list of les on the TV. When there are no photos or videos in the camera memory, you cannot use this feature. Wireless network 121 When searching for AllShare-enabled devices in the area, the camera may not list all available devices. If you power off the TV abnormally while viewing photos or videos on a TV, the camera considers the TV to still be connected. Photos will be shared according to the size you set. Videos will be shared in their original sizes. You can use this feature only with AllShare-enabled TVs. Shared photos or videos will not be stored on the TV, but they can be stored according to the TV specications. Transferring photos or videos to the TV may take some time depending on the network connection, the number of les to be shared, or sizes of the les. You can transfer les one by one. When there are no photos or videos in the camera memory, you cannot use this feature. On a TV screen, you can view only photos or videos captured with your camera. Network conditions will affect how long the camera searches for devices. If the search takes an unusually long time, try reconnecting the camera to the network. Viewing photos or videos on a AllShare-enabled TV Viewing photos or videos on a TV II View your photos or videos on a TV that supports the AllShare function. The TV acts as a display device and you can search photos or videos via the camera. 1 On the Home screen, touch 2 Touch Send les. The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 108) 3 Connect your TV to the wireless network via an AP device and activate AllShare. Refer to your TV's user manual for more information. 4 On your camera, select photos or videos to view. 5 From the list on your camera, select the TV to use for displaying les. The camera will transfer the les. Touch Cancel to stop the transfer. Wireless network 122 Sending or receiving photos or videos with another camera Learn to send or receive photos or videos to or from Samsung cameras that support network connections. You cannot send or receive voice memos. Sending photos or videos to another camera 1 On the Home screen, touch 2 Touch Send. Receiving photos or videos from another camera 1 On the Home screen, touch 2 On the sending camera, activate the camera to camera
. The camera generates a password and displays it on the screen while waiting to make a connection with the receiving camera. To store your camera's name, in Camera to Camera mode, touch m Device Name, and then input a name by touching the Device Name box. 3 On the receiving camera, activate the camera to camera function, and then select Receive. 4 On the receiving camera, select your camera from the list of available devices. 5 On the receiving camera, enter the 4-digit password displayed on your camera in step 2. When the connection is made, the selection area automatically appears on the sending camera. 6 Select photos or videos to send, and then touch
. The camera will send the les. function. 3 On the sending camera, select Send, and then on your camera, touch Receive. 4 Select the sending camera from the list of available devices. 5 Enter the 4-digit password displayed on the sending camera. 6 On the sending camera, send photos or videos. Your camera will receive the les from the sending camera. Wireless network 123 Sending or receiving photos or videos with another camera This feature uses an ad hoc wireless network. If you most recently used your camera to receive les, you must end the connection and reassign your camera as the sender to send les. The range of the wireless connection between two cameras may vary, depending on the conditions of the wireless ad hoc network. If you power off the camera abnormally while sending or receiving photos or videos, the other camera considers the camera to still be connected. Cameras will be disconnected after some time. Transferring photos or videos to the device may take some time depending on the network connection and the le size. If you fail to receive or send a photo or video, it will not be saved on the receiving camera. If no photos have been stored on the camera, you cannot use this feature. You can send and receive photos or videos taken with your camera. Photos larger than The maximum video le size you can send or receive is 35 MB. will automatically be resized. Wireless network 124 Using Auto Backup to send photos or videos You can send photos or videos that you captured with the camera to a PC or Blu-ray disc player wirelessly. Before sending les to your PC, connect the camera to the PC with the USB cable, so that the camera can store information about the PC. The Auto Backup feature works only with the Windows OS. Installing the program for Auto Backup on your PC 1 Connect the camera to the PC with the USB cable. 2 Turn on the camera. The computer recognizes the camera and Intelli-studio launches automatically. 3 When the pop-up appears, click o. The program will be installed automatically. Before install program, ensure that the PC is connected to a network. If no internet connection is available, you must install the program from the provided CD. This program is for backing up les to the PC. You do not need a program to send les to the Blu-ray disc player. Sending photos or videos to a PC 1 On the Home screen of your camera, touch 2 Touch Conrm. 3 Select options, and then touch Conrm. The camera will prepare to connect to the network and send les. 4 The camera will send les. You cannot select individual les to send. This function is available only for newly stored les on the camera. The progress will be shown on the PC monitor. If the PC supports the Wake on LAN(WOL) feature, you can turn on the PC automatically by searching for the PC from your camera.
(p.125) When you connect the camera to the WLAN, select the AP that is connected to the PC. The camera will search for available access points even if you are connecting to the same access point again. If you turn off the camera or remove the battery while sending les, the le transfer will be interrupted. While you are using this feature, the buttons on the camera will be disabled. You can connect only one camera to the PC at a time for sending les. The backup may be canceled due to network conditions. Photos or videos can be sent to a PC or Blu-ray player one time only. Files cannot be sent again even if you reconnect your camera. Wireless network 125 Before you backup the les, connect the Blu-ray disc player to a wired AP. Select Menu Settings Network Network Setting to view the players IP allocation. Even when you have set the Blu-ray player to be accessed by other devices, you may be prompted to change the access setting again. To set the access setting, refer to steps 4 5. This feature works with Samsung Blu-ray players that support Auto Backup. The Auto Backup function cannot be used when the Blu-ray player is:
- playing back les or access to browser, in My Contents or My Device menu
- upgrading the software
- recording les or time-shifting les (reservation recordings will function normally during automatic backups.)
- formatting the player's hard disk or when you are testing the device or its capabilities Using Auto Backup to send photos or videos Sending photos or videos to a Blu-ray disc Player You can send photos from your camera to the Samsung Blu-ray disc player that has an HDD. 1 On the Home screen, touch 2 Touch to connect to the AP. Select the AP that is connected to the Blu-ray player. 3 Search for available devices, and then select your Blu-
ray player. 4 When the camera is connected to the Blu-ray player and a pop-up appears on the player's display, select Allow. 5 On the Blu-ray player, select Menu Settings Network AllShare Server Management Device Access Control your camera. Then, set the Blu-ray player to be accessible by other devices. The Blu-ray player will remember the most recent access settings. If the connection conditions are the same as the last connection, the camera will automatically access the Blu-ray player. 6 Touch Conrm to send les. Transferred les will be stored on the hard disk of the Blu-ray player. Wireless network 126 About the Wakeup on LAN (WOL) feature With the WOL feature, you can automatically turn on or wake up a PC with your camera. This feature has been available for Samsung desktop PCs for the last 5 years (not available for all-in-one PCs). Setting the PC to wake up from sleep mode 1 Click Start, and then open the Control Panel. 2 Congure the network connection. Windows 7:
Click Network and Internet Network and Sharing Center Change adapter settings. Windows Vista:
Click Network and Internet Network and Sharing Center Manage network connections. Windows XP:
Click Network and Internet Connection Network Connection. 3 Right click Local Area, and then click Properties. 4 Click Congure the Power manage tab Allow this device to wake the computer. 5 Click o. 6 Restart the PC. Setting the PC to turn on 1 Turn on the PC and press F2 while the PC is booting. The BIOS setting menu will appear. 2 Select Advanced tab Power management Setup. 3 Select Resume on PME Enabled. 4 Press F10 to save your changes and continue booting. 5 Click Start, and then open the Control Panel. 6 Congure the network connection. Windows 7:
Click Network and Internet Network and Sharing Center Change adapter settings. Windows Vista:
Click Network and Internet Network and Sharing Center Manage network connections. Windows XP:
Click Network and Internet Connection Network Connection. 7 Select drivers related to network adapter. 8 Click Advanced tab and then set WOL menus. Wireless network 127 About the Wakeup on LAN (WOL) feature You cannot use this feature across a rewall or if a security program has been installed. To turn on the PC with the WOL feature, the PC must have an active connection to the LAN. Ensure that the indicator light on the PCs LAN port is on, which shows that the LAN connection is active. Depending on your PC model, the camera may only be able to wake the PC. Depending on your PCs OS or drivers, the names of the WOL setting menu may vary.
- examples of setting menu names : Enable PME, Wake on LAN etc.
- examples of setting menu values : Enable, Magic packet etc. Any changes to your PCs BIOS settings other than the ones described below may damage your PC. The manufacturer is not responsible for damage caused by your changing your PCs BIOS settings. Wireless network 128 Settings Refer to options to congure your cameras settings. Settings menu 130 Accessing the settings menu 130 Sound 131 Display 131 Settings 132 Settings menu Learn to congure your camera's settings. Accessing the settings menu 1 In Shooting or Playback mode, press [m]. 2 Select a menu. Volume Start Sound Shutter Sound Beep Sound AF Sound Medium Off On On On Exit Move Option Description U Sound: Set various camera sounds and the volume.
(p. 112) Y Display: Customize the display settings. (p. 112) n Settings: Customize the settings for the camera system. (p. 113) 3 Select an item. Volume Start Sound Shutter Sound Beep Sound AF Sound Medium Off On On On Exit Move 4 Select an option. Volume Start Sound Shutter Sound Beep Sound AF Sound Off Low Medium High On Back Set 5 Press [m] to return to the previous screen. Settings 130 Settings menu Sound Item Volume Start Sound Shutter Sound Beep Sound AF Sound
* Default Description Set the volume of all sounds.
(Off, Low, Medium*, High) Set to emit a sound when you turn on your camera. (Off*, On) Set to emit a sound when you press the shutter button. (Off, On*) Set to emit a sound when you press the buttons or switch modes. (Off, On*) Set to emit a sound when you half-press the shutter button. (Off, On*) Display Item Function Description Grid Line Date/Time Display Display Brightness Quick View Power Save
* Default Description Display a brief description of an option a menu.
(Off, On*) Select a guide to help you compose a scene.
(Off*, 3 X 3, 2 X 2, Cross, Diagonal) Set whether or not to display the date and time on the camera's display. (Off*, On) Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright) Normal is xed in Playback mode even if you have selected Auto. Set the duration for reviewing a captured image before returning to the Shooting mode.
(Off, 0.5 sec*, 1 sec, 3 sec) If you perform no operations for 30 seconds, the camera automatically switches to Power save mode. (Off*, On) In Power save mode, press any button other than [POWER] to resume using the camera. Even if you do not set the Power save mode, the screen will dim 30 seconds after the last operation to save power. Settings 131 Settings menu Settings Item Language Time Zone Date/Time Set Date Type
* Default Item Description Set a language for the display text. Set the time zone for your location. When you travel to another country, select Visit, and then select the appropriate time zone. (Home*, Visit) Set the date and time. Set a date format. (YYYY/MM/DD*, MM/DD/YYYY, DD/MM/YYYY) The default date type may differ depending on the language selected. File No.
* Default Description Specify how to name les. Reset: Set the le number to start from 0001 when you insert a new memory card, format a memory card, or delete all les. Series*: Set the le number to resume from the previous le number when you insert a new memory card, format a memory card, or delete all les. The default name of the rst folder is 100PHOTO and the default name of the rst le is SAM_0001. The le number increases one at a time from SAM_0001 to SAM_9999. The folder number increases one at a time from 100PHOTO to 999PHOTO. The maximum number of les that can be stored in one folder is 1,000. The camera denes le names according to the Design rule for Camera File system (DCF) standard. If you intentionally change le names, the camera may not play back the les. Settings 132 Settings menu Item Imprint
* Default Description Set whether or not to display the date and time on captured photos. (Off*, Date, Date & Time) The date and time will be displayed on the bottom right corner of the photo. Some printer models may not print the date and time properly. The camera will not display the date and time if:
- you select Text in s mode
- you select Panorama mode Auto Power Off Set the camera to automatically turn off when you perform no operations for a specied period.
(Off, 1 min, 3 min*, 5 min, 10 min) Your settings will not change when you replace the battery. The camera will not automatically turn off when the camera is connected to a computer or printer, and when you are playing a slide show or videos. AF Lamp Set a light to automatically turn on in dark places to help you focus. (Off, On*) Item Format Reset Anynet+ (HDMI-
CEC)
* Default Description Format the internal memory and the memory card. Formatting will delete all les, including protected les. (No, Yes) Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos. Reset menus and shooting options. Date and time, language, and video output settings will not be reset. (No, Yes) Turn on to control the camera with a TV remote control when you connect it to an HDTV that supports the Anynet+(CEC) prole. Off: View les without using an HDTV remote control. On*: Control the camera with an HDTV remote control. Settings 133 Settings menu Item HDMI Size Video Out
* Default
* Default Item USB Description Select the mode to use when you connect the camera to a computer or printer with a USB cable. Select: Manually select the USB mode when you connect your camera to a device. Computer*: Connect your camera to a computer for transferring les. Printer: Connect your camera to a printer for printing les. PC Software Set Intelli-studio to launch automatically when you connect your camera to your computer. (Off, On*) Description Set the resolution of photos when the camera plays back les on an HDTV via the HDMI cable.
(NTSC: 1080i*, 720p, 480p/
PAL: 1080i*, 720p, 576p) If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution. If you select 480p or 576p, the playback menus and Smart Album will not be available when you connect the camera to a TV. Set the video signal output for your region. NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico PAL (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, England, Finland, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand Settings 134 Appendixes Get information about error messages, specications, and maintenance. Error messages 136 Camera maintenance 137 Cleaning your camera 137 Using or storing the camera 138 About memory cards 139 About the battery 142 Before contacting a service center 146 Camera specications 149 Glossary 153 FCC notice 158 Index 159 Error messages When the following error messages appear, try these remedies. Error message Suggested remedies Turn off your camera, and then turn it on again. Card Error Remove your memory card, and then insert it again. Format your memory card. You can lock an SD, SDHC, or SDXC card to prevent les from being deleted. Unlock the card when shooting. Card Locked Card not supported. DCF Full Error The inserted memory card is not supported by your camera. Insert a SD, SDHC, or SDXC memory card. File names do not match the DCF standard. Transfer the les from the memory card to your computer and format the card. Then, open the Settings menu and select File No. Reset.
(p. 113) Error message File Error File system not supported. Suggested remedies Delete the damaged le or contact a service center. Your camera does not support the FAT le structure of the inserted memory card. Format the memory card on the camera. Low Battery Insert a charged battery or recharge the battery. Memory Full No Image File Delete unnecessary les or insert a new memory card. Capture photos or insert a memory card that contains some photos. Appendixes 136 Camera maintenance Cleaning your camera Camera lens and display Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently. Camera body Wipe gently with a soft, dry cloth. Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. Do not press on the lens cover or use a blower brush on the lens cover. Appendixes 137 Camera maintenance Using or storing the camera Inappropriate places to use or store the camera Avoid exposing the camera to very cold or very hot temperatures. Avoid using your camera in areas with extremely high humidity, or where the humidity changes drastically. Avoid exposing the camera to direct sunlight and storing it in hot, poorly-ventilated areas, such as in a car during summer time. Protect your camera and the display from impact, rough handling, and excessive vibration to avoid serious damage. Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. Do not use your camera near fuels, combustibles, or ammable chemicals. Do not store or carry ammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. Do not store the camera where there are mothballs. Using on beaches or shores Protect your camera from sand and dirt when you use it on beaches or in similar areas. Your camera is not waterproof. Do not handle the battery, adapter, or memory card with wet hands. Operating the camera with wet hands may cause damage to your camera. Storing for extended period of time When you store the camera for an extended period, place it in a sealed container with an absorbent material, such as silica gel. Remove the batteries from your camera when storing it for an extended period. Installed batteries may leak or corrode over time and cause serious damage to your camera. Over time, unused batteries will discharge and must be recharged before use. Using the camera with caution in humid environments When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it. Appendixes 138 Camera maintenance Other cautions Do not swing your camera by the strap. This may cause injury to yourself or others or damage to your camera. Do not paint your camera, as paint can clog moving parts and prevent proper operation. Turn off the camera when not using it. Your camera contains delicate parts. Avoid impacts to the camera. Protect the display from external force by keeping it in the case when not in use. Protect the camera from scratches by keeping it away from sand, sharp implements, or loose change. Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. Protect the lens from ngerprints and scratches. Clean the lens with a soft, clean, debris-free lens cloth. The camera may turn off if struck or dropped. This is to protect the memory card. Turn on the camera to use it again. While you use the camera, it may heat up. This is normal and should not affect your cameras lifespan or performance. When you use the camera in low temperatures, it may take some time to turn on, the color of the display may be changed temporarily, or after-images may appear. These conditions are not malfunctions and they will correct themselves when the camera is returned to milder temperatures. Paint or metal on the outside of the camera may cause allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you experience any of these symptoms, stop using the camera immediately and consult a doctor. Do not insert foreign objects into any of your cameras compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. Do not allow unqualied personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualied service is not covered by your warranty. About memory cards Supported memory cards Your camera supports SD, SDHC, or SDXC memory cards. Terminal Write-protect switch Label (front) You can prevent les from being deleted by using the write-protect switch on an SD, SDHC, or SDXC card. Slide the switch down to lock or slide it up to unlock. Unlock the card when capturing photos and videos. Appendixes 139 Camera maintenance Memory card capacity The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB SD card:
Photo Size Super Fine Fine Normal Video Size 1280X720 640X480 30fps Approx. XX' XX''
Approx. XX' XX''
15fps
-
-
* The gures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time. XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX Appendixes 140 Camera maintenance Cautions when using memory cards Avoid exposing memory cards to very cold or very hot temperatures (below 0 C/32 F or above 40 C/104 F). Extreme temperatures can cause memory cards to malfunction. Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card. Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. Turn off the camera when you insert or remove the memory card. Do not remove the memory card or turn off your camera while the lamp is blinking, as this may damage your data. When the lifespan of a memory card has expired, you cannot store any more photos on the card. Use a new memory card. Do not bend, drop, or subject memory cards to heavy impact or pressure. Avoid using or storing memory cards near strong magnetic elds. Avoid using or keeping memory cards in areas with high temperature, high humidity, or corrosive substances. Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before you insert the memory card in your camera. Do not allow liquids, dirt, or foreign substances to come in contact with memory cards or the memory card slot. Doing so may cause memory cards or the camera to malfunction. When you carry a memory card, use a case to protect the card from electrostatic discharges. Transfer important data to other media, such as a hard disk, CD, or DVD. When you use the camera for an extended period, the memory card may become warm. This is normal and does not indicate a malfunction. The manufacturer is not responsible for any loss of data. Appendixes 141 Camera maintenance About the battery Use only Samsung-approved batteries. Battery specications Specication Model Type Cell capacity Voltage Charging time* (when the camera is switched off) Description BP88 Lithium-ion battery 880 mAh 3.7 V Approximately 150 min
* Charging the battery by connecting it to a computer may take longer. Battery life Average shooting time/
Number of photos Photos Approximately XXX min/
Approximately XXX photos Videos Approximately XXX min Test conditions (when the battery is fully charged) The battery life was measured under the following conditions: in p mode, in darkness, OIS on. resolution, Fine quality, 1. Set the ash option to Fill in, take a single shot, and zoom in or out. 2. Set the ash option to Off, take a single shot, and zoom in or out. 3. Perform steps 1 and 2, waiting 30 seconds between each step. Repeat the process for 5 minutes, and then turn off the camera for 1 minute. 4. Repeat steps 1 to 3. Record videos at 30 FPS. resolution and The gures above are measured by Samsungs standards. Your results may differ, depending on your actual usage. Several videos were recorded in succession to determine the total recording time. When using network functions, the battery will be depleted more quickly. Appendixes 142 Camera maintenance Low battery message When the battery has fully discharged, the battery icon will turn red and the "Low Battery" message will appear. Notes about using the battery Avoid exposing batteries to very cold or very hot temperatures
(below 0 C/32 F or above 40 C/104 F). Extreme temperatures can reduce the charging capacity of your batteries. When you use the camera for an extended period, the area around the battery chamber may become warm. This does not affect the normal use of the camera. Do not pull the power supply cord to disconnect the plug from the power outlet, as this may cause a re or electric shock. In temperatures below 0 C/32 F, battery capacity and battery life may decrease. Battery capacity may decrease in low temperatures but will return to normal in milder temperatures. Cautions about using the battery Protect batteries, chargers, and memory cards from damage Prevent batteries from making contact with metal objects, as this can create a connection between the + and terminals of your battery and lead to temporary or permanent battery damage and may cause a re or electric shock. Notes about charging the battery If the indicator light is off, make sure that the battery is inserted correctly. If the camera is on while charging, the battery may not fully charge. Turn off the camera before charging the battery. Do not use your camera when you charge the battery. This may cause a re or electric shock. Do not pull the power supply cord to disconnect the plug from the power outlet, as this may cause a re or electric shock. Let the battery charge for at least 10 minutes before turning on the camera. If you connect the camera to an external power source while the battery is depleted, using some high energy-consuming functions will cause the camera to turn off. To use the camera normally, recharge the battery. Appendixes 143 Camera maintenance Using the ash or recording videos depletes the battery quickly. Charge the battery until the red indicator light turns off. If the indicator light does not illuminate, reconnect the cable, or remove the battery and insert it again. Overcharging batteries may shorten battery life. After charging is nished, disconnect the cable from your camera. Do not bend or place heavy objects on the AC cable. Doing so may damage the cable. Handling and disposing of batteries and chargers with care Never dispose of batteries in a re. Follow all local regulations when you dispose of used batteries. Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when they are overheated. Notes about charging with a computer connected Use only the provided USB cable. The battery may not charge when:
- you use a USB hub
- other USB devices are connected to your computer
- you connect the cable to the port on the front side of your computer
- the USB port of your computer does not support the power output standard (5 V, 500 mA) Appendixes 144 Camera maintenance Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling:
The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center. Use only authentic, manufacturer-recommend battery chargers and adapters and charge the battery only by the methods described in this user manual. Do not place the battery near heating devices or expose it to excessively warm environments, such as the inside of an enclosed car in the summertime. Do not place the battery in a microwave oven. Avoid storing or using the battery in hot, humid places, such as spas or shower enclosures. Do not rest the device on ammable surfaces, such as bedding, carpets, or electric blankets for a prolonged period. When the device is switched on, do not leave it in any conned space for a prolonged period. Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches. Use only authentic, manufacturer-recommended, Lithium-
ion replacement batteries. Appendixes 145 Do not disassemble or puncture the battery with any sharp object. Avoid exposing the battery to high pressure or crushing forces. Avoid exposing the battery to major impacts, such as dropping it from high places. Do not expose the battery to temperatures of 60 C
(140 F) or above. Do not allow the battery to come in contact with moisture or liquids. Do not expose the battery to sources of excessive heat such as sunshine, re or the like. Disposal guidelines Dispose of the battery with care. Do not dispose of the battery in a re. Disposal regulations may differ by country or region. Dispose of the battery in accordance with all local and federal regulations. Guidelines for charging the battery Charge the battery only by the method described in this user manual. The battery can ignite or explode if not charged properly. Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery. Situation Cannot turn on the camera The power turns off suddenly The camera is losing battery power quickly Suggested remedies Ensure that the battery is inserted. Ensure that the battery is inserted correctly. (p. 17) Charge the battery. Charge the battery. Your camera may be in Power save mode. (p. 112) The camera may turn off to prevent the memory card from being damaged due to an impact. Turn on your camera again. The battery may lose power more quickly in low temperatures (below 0 C/32 F). Keep the battery warm by putting it into your pocket. Using the ash or recording videos depletes the battery quickly. Recharge if needed. Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly. Situation Suggested remedies There is no space on the memory card. Delete unnecessary les or insert a new card. Format the memory card. The memory card is defective. Get a new Cannot capture photos memory card. Make sure that the camera is switched on. Charge the battery. Make sure that the battery is inserted correctly. Remove the battery and insert it again. While you use the camera, it may heat up. This is normal and should not affect your cameras lifespan or performance. The ash option may be set to Off.
(p. 60) You cannot use the ash in some modes. The camera freezes The camera heats up The ash does not work Appendixes 146 Before contacting a service center Situation The ash res unexpectedly The date and time are incorrect The display or buttons do not work The camera display responds poorly The memory card has an error Cannot play back les Suggested remedies The ash may re due to static electricity. The camera is not malfunctioning. Set the date and time in the display settings.
(p. 113) Remove the battery, and then insert it again. If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures. Turn off your camera, and then turn it on again. Remove your memory card, and then insert it again. Format your memory card. See Cautions when using memory cards for more detail. (p. 122) If you change the name of a le, your camera may not play the le (the name of the le should meet the DCF standard). If you encounter this situation, play back the les on your computer. Situation The photo is blurry The colors in the photo do not match the actual scene The photo is too bright The photo is too dark Suggested remedies Make sure that the focus option you set is suitable for close-up shots. (p. 63) Make sure that the lens is clean. If not, clean the lens. (p. 118) Make sure that the subject is within range of the ash. (p. 131) An incorrect White Balance can create unrealistic color. Select the proper White Balance option to suit the light source.
(p. 74) Your photo is overexposed. Turn off the ash. (p. 60) Adjust the ISO sensitivity. (p. 62) Adjust the exposure value. (p. 72) Your photo is underexposed. Turn on the ash. (p. 60) Adjust the ISO sensitivity. (p. 62) Adjust the exposure value. (p. 72) Appendixes 147 Before contacting a service center Situation The TV does not display your photos Your computer does not recognize your camera Your computer disconnects the camera while transferring les Your computer cannot play videos Suggested remedies Make sure that the camera is correctly connected to the TV with the A/V cable. Make sure that your memory card contains photos. Make sure that the USB cable is connected correctly. Make sure that your camera is switched on. Make sure that you are using a supported operating system. The le transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again. Videos may not play on some video player programs. To play video les captured with your camera, install and use the Intelli-studio program on your computer. (p. 104) Situation Intelli-studio is not functioning properly Your TV or computer cannot display photos and videos that are stored on an SDXC memory card. Your computer does not recognize an SDXC memory card. Suggested remedies End Intelli-studio and restart the program. You cannot use Intelli-studio on Macintosh computers. Make sure that PC Software is set to On in the settings menu. (p. 115) Depending on your computer's specications and environment, the program may not launch automatically. In this case, click Start My Computer
Intelli-studio iStudio.exe on your computer. SDXC memory cards use the exFAT le system. Ensure that the external device is compatible with the exFAT le system before connecting the camera to the device. SDXC memory cards use the exFAT le system. To use SDXC memory cards on a Windows XP computer, download and update the exFAT le system driver from the Microsoft website. Appendixes 148 Camera specications Image sensor Type 1/2.3" (Approximately 7.76 mm) CCD Effective pixels Approximately 16.0 mega-pixels Total pixels Approximately 16.4 mega-pixels Lens Focal length Samsung Lens f = 4.5-22.5 mm
(35 mm lm equivalent: 25-125 mm) F-stop range F2.5 (W)-F6.3 (T) Zoom Display Type Feature Focusing Type Still image mode: 1.0-5.0X
(Optical zoom X Digital zoom: 25.0X, Optical zoom X Intelli zoom: 10.0X) Playback mode: 1.0-XX.XX (depending on image size) TFT LCD 3.0" (7.62 cm) 460K TTL auto focus (Center AF, Multi AF, Face Detection AF, Tracking AF) Range Wide (W) Tele (T) Normal (AF) 80 cm-innity 100 cm-innity Macro 5-80 cm 100-innity Auto Macro 5 cm-innity 100 cm-innity Shutter speed Auto: 1/8-1/2,000 sec. Program: 1-1/2,000 sec. Night: 8-1/2,000 sec. Firework: 2 sec. Exposure Control Metering Program AE Multi, Spot, Center-weighted, Face Detection Compensation 2EV (1/3 EV Step) ISO equivalent Auto, ISO 80, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 Flash Mode Range Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix Wide: 0.4-3.5 m (ISO Auto) Tele: 0.2-2.0 m (ISO Auto) Recharging time Approximately 4 sec. Appendixes 149 Camera specications Shake reduction DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)]
Effect Photo Shooting mode Video Shooting mode White Balance Smart Filter: Normal, Miniature, Vignetting, Soft Focus, Old Film, Half Tone Dot, Sketch, Fish-eye, Classic, Retro, Oil Painting, Cartoon, Ink Painting, Cross Filter, Zooming Shot Image Adjust: Contrast, Sharpness, Saturation Smart Filter: Normal, Palette Effect 1, Palette Effect 2, Palette Effect 3, Palette Effect 4, Miniature, Vignetting, Half Tone Dot, Sketch, Fish-eye, Classic, Retro Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set, Color Temp. Date Imprinting Date & Time, Date, Off Shooting Photos Modes: Smart Auto (Portrait, Night Portrait, Backlight Portrait, Night, Backlight, Landscape, White, Natural Green, Blue Sky, Sunset, Macro, Macro text, Macro Color, Tripod, Action, Fireworks), Program, Aperture Priority, Shutter Priority, Manual, Scene (Panorama, PIP Shot, Split Shot, Magic Frame, Beauty Shot, Night, Landscape, Text, Sunset, Dawn, Backlight, Beach & Snow, Zooming Shot), Apps Burst: Single, Continuous, Motion Capture, AEB Timer: 2 Sec, 10 Sec, Double (2 Sec, 10 Sec) Modes: Smart Scene Detection (Landscape, Blue Sky, Natural Green, Sunset), Movie Format: MP4 (H.264) (Max recording time: 20 min) Size: 1280X720, 640X480 Frame Rate: 30fps, 15fps (only in some Smart Videos Filter options) Sound Alive: Sound Alive On, Sound Alive Off, Mute OIS: On, Off Video editing (embedded): Pause during recording, Still image capture Appendixes 150 Camera specications Playback Photos Videos Storage Media Type: Single image, Thumbnails, Multi Slide Show with Music and Effect, Movie clip, Smart Album*
* Smart Album category: Type, Date, Week, Face Edit: Resize, Rotate, Image Adjust, Smart Filter, Trim Effect: Image Adjust (Red-eye Fix, Face Retouch, Brightness, Contrast, Saturation, Add Noise), Smart Filter (Normal, Miniature, Vignetting, Soft Focus, Old Film, Half Tone Dot, Sketch, Fish-eye, Classic, Retro, Oil Painting, Cartoon, Ink Painting, Cross Filter, Zooming Shot) Edit: Still image capture, Time trimming Internal memory: Approximately XX.X MB External memory (Optional):
microSD card (1-2 GB guaranteed), microSDHC card (up to 8 GB guaranteed)) Internal memory capacity may not match these specications. Image size For 1 GB microSD: Number of photos Super Fine 4608 X 3456 4608 X 3072 4608 X 2592 3648 X 2736 2592 X 1944 1984 X 1488 1920 X 1080 1024 X 768 XXX XXX XXX XXX XXX XXX XXX XXX Fine XXX XXX XXX XXX XXX XXX XXX XXX Normal XXX XXX XXX XXX XXX XXX XXX XXX These gures are measured under Samsungs standard conditions. Your results may vary depending on the shooting conditions and camera settings. Interface Digital output connector USB 2.0 Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1, Audio input/output Internal speaker (Mono), Microphone (Mono) File format PictBridge 1.0 Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Video output Audio: AAC) A/V: NTSC, PAL (selectable) HDMI 1.4: NTSC, PAL (selectable) DC power input connector 5.0 V Appendixes 151 Camera specications Power source Rechargeable battery Lithium-ion battery (BP88, 880 mAh) Connector type Micro USB (7 pin) The power source may differ depending on your region. Wireless network Wi-Fi (IEEE 802.11 b/g/n), AllShare, Web Upload, Emailing, Camera to Camera, AP Connection, Auto Backup, Remote Viewnder Dimensions (W X H X D) XXX X XXX X XXX mm (without protrusions) Weight XXX.X g (without battery and memory card) Operating Temperature 0-40 C Operating Humidity 5-85 %
Software Intelli-studio Specications may change without notice to improve performance. Appendixes 152 Glossary AEB (Auto Exposure Bracket) This feature automatically captures several images at different exposures to help you capture a properly-exposed image. AF (Auto Focus) A system that automatically focuses the camera lens on the subject. Your camera uses the contrast to focus automatically. Aperture The aperture controls the amount of light that reaches the cameras sensor. Camera shake (Blur) If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the ash, or using a faster shutter speed. Alternately, use a tripod, the DIS or OIS function to stabilize the camera. Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition. DCF (Design rule for Camera File system) A specication to dene a le format and le system for digital cameras created by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of eld The distance between the nearest and farthest points that can be acceptably focused in a photograph. Depth of eld varies with lens aperture, focal length, and distance from the camera to the subject. Selecting a smaller aperture, for example, will increase the depth of eld and blur the background of a composition. Digital zoom A feature that articially increases the amount of zoom available with a zoom lens (Optical zoom). When using the Digital zoom, the image quality will deteriorate as the magnication increases. DPOF (Digital Print Order Format) A format for writing printing information, such as selected images and number of prints, on a memory card. DPOF-compatible printers, sometimes available at photo shops, can read the information from the card for convenient printing. Appendixes 153 Glossary EV (Exposure Value) All the combinations of the cameras shutter speed and lens aperture that result in the same exposure. EV Compensation This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter. Exif (Exchangeable Image File Format) A specication to dene an image le format for digital cameras created by the Japan Electronic Industries Development Association (JEIDA). Exposure The amount of light allowed to reach the cameras sensor. Exposure is controlled by a combination of the shutter speed, the aperture value, and ISO sensitivity. Flash A speed light that helps to create adequate exposure in low-light conditions. Focal length The distance from the middle of the lens to its focal point (in millimeters). Longer focal lengths result in narrower angles of view and the subject is magnied. Shorter focal lengths result in wider angles of view. Histogram A graphical representation of the brightness of an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. High points at the left (too dark) and right (too bright) on the histogram indicate a photo that is improperly exposed. H.264/MPEG-4 A high-compression video format established by international standard organizations ISO-IEC and ITU-T and developed by the Joint Video Team (JVT). This codec is capable of providing good video quality at low bit rates. Image sensor The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS (Complementary Metal Oxide Semiconductor). Appendixes 154 Glossary ISO sensitivity The sensitivity of the camera to light, based on the equivalent lm speed used in a lm camera. At higher ISO sensitivity settings, the camera uses a higher shutter speed, which can reduce blur caused by camera shake and low light. However, images with high sensitivity are more susceptible to noise. JPEG (Joint Photographic Experts Group) A lossy method of compression for digital images. JPEG images are compressed to reduce their overall le size with minimal deterioration of the image resolution. LCD (Liquid Crystal Display) A visual display commonly used in consumer electronics. This display needs a separate backlight, such as CCFL or LED, to reproduce colors. Macro This feature allows you to capture close-up photos of very small objects. When using the macro feature, the camera can maintain a sharp focus on small objects at a near life-size ratio (1:1). Metering The metering refers to the way in which the camera measures the quantity of light to set the exposure. MJPEG (Motion JPEG) A video format which is compressed as a JPEG image. Noise Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place. Optical zoom This is a general zoom which can enlarge images with a lens and does not deteriorate quality of images. Appendixes 155 Glossary Quality An expression of the rate of compression used in a digital image. Higher quality images have a lower rate of compression, which usually results in a larger le size. Resolution The number of pixels present in a digital image. High resolution images contain more pixels and typically show more detail than low resolution images. Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion. Smart zoom Smart zoom lets you zoom in with less degradation of picture quality than the optical zoom and digital zoom. Vignetting A reduction of an images brightness or saturation at the periphery
(outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image. White balance (color balance) An adjustment of the intensities of colors (typically the primary colors red, green, and blue), in an image. The goal of adjusting the white balance, or color balance, is to correctly render the colors in an image. Appendixes 156 Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government ofce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. PlanetFirst represents Samsung Electronics'
commitment to sustainable development and social responsibility through eco-driven business and management activities. Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. This Class [B] digital apparatus complies with Canadian ICES-003. Dispose unwanted electronics through an approved recycler. To nd the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect Or call, (877) 278 - 0799 Appendixes 157 FCC notice NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorientate, or relocate, the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help. CAUTION:
Changes or modications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment. Declaration of Conformity Trade Name Model No.
: Samsung Electronics America, Inc.
: DV300F Responsible Party
: Samsung Electronics America, Inc. Address
: 85 Challenger Road, Ridgeeld Park, NJ 07660 Telephone No.
: 1-800-SAMSUNG (726-7864) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Appendixes 158 IC notice Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Caution:
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. IC: 649E-DV300F Appendixes 159 Index A AF-assist light Location 15 Settings 135 AF Lamp 135 AF Sound 133 AllShare 122 Anynet+ 135 Aperture Priority mode 44 Aperture value 43 Auto Backup 127 A/V port 15 B Battery Caution 145 Charging 19 Inserting 18 Beauty Shot mode 40 Connecting to a computer Blink Detection 70 Brightness Playback mode 99 Shooting mode 73 Burst modes Bracket 79 High-speed 78 Precapture 79 C Camera maintenance 139 Mac 109 Windows 104 Contrast Playback mode 99 Shooting mode 83 D Date/Time Set 134 Deleting les 90 Digital Print Order Format
(DOF) 99 Camera specications 151 Digital zoom 29 Capturing an image from video 95 Charging 19 Cleaning Camera body 139 Display 139 Lens 139 Disconnecting the camera 108 Display brightness 133 Display type 26 DUAL IS mode 47 E Editing photos 96 Editing videos Capturing 95 Trimming 94 Enlarging 91 Error messages 138 Exposure 73 F Face Detection 68 Flash Auto 62 Fill in 62 Intensity 62 Off 61 Red-eye 62 Red-eye Fix 62 Slow Sync 62 Appendixes 160 Index Focus area Center AF 67 Multi AF 67 Selection AF 67 Tracking AF 67 Formatting 135 Function button 17 G Grid Line 133 H Half-press shutter 32 HDMI Size 136 HDR mode 38 HDTV 102 I Icons Playback mode 85 Shooting mode 22 Image Adjustment Add Noise 99 Brightness Playback mode 99 Shooting mode 73 Contrast Playback mode 99 Shooting mode 83 Red-eye 98 Saturation Playback mode 99 Shooting mode 83 Sharpness 83 Image quality 59 Imprint 135 Intelli-studio 106 ISO sensitivity 63 L Language settings 134 M Macro Auto Macro 65 Macro 65 Manual Focus 65 Magic Frame mode 39 Manual mode 46 Memory card Caution 143 Insert 18 Menu button 17 Metering Center-weighted 74 Multi 74 Spot 74 Mode dial 16 Movie mode 51 My star Cancelling 87 Ranking 86 Registering 71 O Optical Image Stabilization
(OIS) 31 Optional accessories 14 P Panorama 3D Panorama 48 Action Panorama 50 Live Panorama 48 PictBridge 110 Playback button 17 Playback mode 85 Power button 15 Power save mode 133 Printing photos 110 Program mode 42 Protecting les 89 Appendixes 160 Index Q Quick view 133 R Red-eye Playback mode 98 Shooting mode 61 Remote Viewnder 120 Reset 135 Resolution Playback mode 96 Shooting mode 58 Retouching faces Playback mode 98 Shooting mode 40 Rotating 96 S Saturation Playback mode 99 Shooting mode 83 Scene mode 37 Self portrait 69 Service center 148 Settings 134 Sharpness 83 Shooting portraits Beauty Shot mode 40 Blink Detection 70 Face Detection 68 Red-eye 62 Red-eye x 62 Self portrait 69 Smart Face Recognition 70 Smile Shot 69 Shutter button 15 Shutter Priority mode 45 Slide show 93 Smart Album 88 Smart Auto mode 35 Smart Face Recognition 70 Smart Filter Playback mode 97 Shooting mode 81 Smart Scene Detection mode 54 Smart zoom 30 Smile Shot 69 Sound settings 27 Status lamp 16 T Thumbnails 89 Timer Shooting mode 60 Timer lamp 15 Time settings 20 Time zone settings 20, 134 Transferring les Auto Backup 127 Camera to Camera 125 Email 115 Mac 109 Windows 104 Tripod mount 15 U Unpacking 14 USB port 15 Appendixes 162 Z Zoom Using the zoom 29 Zoom button 16 Zoom sound settings 51 Zooming Shot mode 41 3 3D Photo mode 38 3D TV 103 Index V Video Playback mode 94 Shooting mode 51 Video out 136 Viewing les Folder 87 Slide show 93 Smart Album 88 Thumbnails 89 TV 101 W Website Accessing 119 Uploading photos or videos 119 White Balance 75 Wireless network 112 Appendixes 162 Please refer to the warranty that came with your product or visit our website www.samsung.com for after-sales service or inquiries.
This product uses the FCC Data API but is not endorsed or certified by the FCC