EPNG930 WIRELESS CHARGER Users Manual

QUICK START GUIDE EP-NG930 Printed in Korea GH68-45871F Rev.1.0 L Type 02/2016 e f a b a c d 1 2 Copyright 2016 Samsung Electronics Please read this guide before using the device to ensure safe and proper use. Images may differ in appearance from the actual product. Content is subject to change without prior notice. You can access the full user manual for more information. Visit www.samsung.com to view device information, the user manual, and more. Before using the charger stand, make sure it is compatible with your device. Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service provider for more information. Device layout Charger coil Wireless charging surface Phone support Indicator light Charger port Fan vent Using the charger stand 1. Connect the charger to the charger stand. Then, place a supported mobile device on the phone support. ( 1 ) 3 2. When the mobile device is fully charged, remove the mobile device from the charger stand. Use only Samsung-approved chargers

(5 V/2 A, 5.3 V/2 A, and 9 V/1.67 A). Wireless charging covers and chargers are sold separately. The charger should remain close to the electric socket and easily accessible while charging. Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the charger stand. When a headset is connected to your mobile device, place the mobile device in a landscape position on the charger stand. If you place the mobile device in a portrait position, it may not charge. 4 Fast wireless charging To begin fast wireless charging, place a mobile device that supports fast wireless charging on the charger stand. For more information, refer to the user manual. Use only Samsung-approved chargers that support fast charging (EP-TA20 series 9 V/1.67 A). The fan inside the wireless charger operates during fast wireless charging. The fan will not operate when this feature is deactivated on your mobile device. Safety information Read all safety information before using the device to ensure safe and proper use. To view the full safety information, refer to the Samsung website. Use manufacturer-approved batteries, chargers, accessories, and supplies Do not touch the device with wet hands 5 Do not drop or cause an impact to the charger or the device The device can be used in locations with an ambient temperature of 0C to 35C. You can store the device at an ambient temperature of -20C to 50C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the batterys lifespan Prevent the multipurpose jack, the small end of the charger, and the fan vent from coming into contact with conductive materials, such as liquids, dust, metal powders, and pencil leads Do not cover or block the devices fan vent Do not allow children or animals to chew or suck the device Do not disassemble, modify, or repair your device Magnetic stripe cards, including credit cards, phone cards, passbooks, and boarding passes, may be damaged by magnetic fields 6 FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by Samsung Electronics Co., Ltd. could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 7 Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. 'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Dclaration d'Industrie Canada sur l'exposition aux radiations Cet quipement est conforme aux limites tablies par Industrie Canada en matire d'exposition aux radiations dans un environnement non contrl. Cet quipement ne doivent pas tre colocaliss ou fonctionner en conjonction avec tout autre antenne ou metteur. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. 8