| submitted | available | document details (if available) | source link |
|---|---|---|---|
| December 09 2013 | December 02 2014 |
| various | Users Manual 1 | Users Manual | 5.71 MiB | December 09 2013 / December 02 2014 |
4 G L T E S M A R T P H O N E User Manual Please read this manual before operating your phone and keep it for future reference. DRAFT Internal Use OnlyThis document is watermarked because certain important information in the document has not yet been verified. This document has been sent to you as a draft and for informational purposes only. The document should only be used for internal purposes and may not be distributed outside of Samsung, except to Samsung's carrier customer for testing purposes. Distributing the document outside of Samsung, except to Samsung's carrier customer for testing purposes could result in legal exposure to the company if the preliminary, unverified information in the draft turns out to be inaccurate. Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the Phone System), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers. Open Source Software Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open source licenses, please visit:
http://opensource.samsung.com. Disclaimer of Warranties; Exclusion of Liability EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING T399_UM_English_MHA_081913_F2 DRAFT Internal Use Only THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS. Modification of Software SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES CAUSED BY YOUR EDITING OF REGISTRY SETTINGS, OR YOUR MODIFICATION OF OPERATING SYSTEM SOFTWARE. USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND APPLICATIONS TO WORK IMPROPERLY. YOUR CARRIER MAY NOT PERMIT USERS TO DOWNLOAD CERTAIN SOFTWARE, SUCH AS CUSTOM OS. SAFE (Samsung Approved For Enterprise) SAFE: "SAFE" (Samsung for Enterprise) is a mark for a Samsung device which has been tested against Samsung's own internal criteria for interoperability with certain third party security-related solutions for MDM and VPN. The testing includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. During the testing, the device is tested with the security solutions to see if the solutions work with the device as described by the third party security solution providers. The testing, for example, includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. For more information about Samsung's SAFE program, please refer to www.samsung.com/us/safe. Disclaimer of Warranties: EXCEPT AS OTHERWISE PROVIDED IN THEIR STANDARD END USER LICENSE AND WARRANTY, TO THE FULL EXTENT PERMITTED BY LAW SAMSUNG ELECTRONICS CO., LTD., SAMSUNG TELECOMMUNICATIONS AMERICA, LLC, AND THEIR AFFILIATES (COLLECTIVELY REFERRED TO HEREIN AS THE "SAMSUNG ENTITIES") EXPRESSLY DISCLAIM ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, INTEROPERABILITY OR NON-INFRINGEMENT, WITH RESPECT TO INFORMATION TECHNOLOGY SECURITY PROTECTION, SAFE DRAFT Internal Use Only DEVICES AND APPLICATIONS TESTED WITH SAFE DEVICES. IN NO EVENT SHALL THE SAMSUNG ENTITIES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER WITH RESPECT TO INFORMATION TECHNOLOGY SECURITY PROTECTION, SAFE DEVICES OR APPLICATIONS TESTED WITH SAFE DEVICES. In addition, information technology security protection will be affected by features or functionality associated with, among other things the e-mail platform, master data management, and virtual private network solutions selected by the software provider, solution provider or user. Choice of an e-mail, master data management, and virtual private network solution is at the sole discretion of the software provider, solution provider or user and any associated effect on information technology security protection is solely the responsibility of the software provider, solution provider or user. For complete statement of limited warranty, please refer to www.samsung.com/us/safe, available on the web and where Samsung smartphone and Galaxy Tab devices are sold. [101212]
Samsung Telecommunications America (STA), LLC Headquarters:
1301 E. Lookout Drive Richardson, TX 75082 Customer Care Center:
1000 Klein Rd. Plano, TX 75074 Toll Free Tel: 1.888.987.HELP (4357) DRAFT Internal Use Only Internet Address:
http://www.samsung.com 2013 Samsung Telecommunications America, LLC. Samsung is a registered trademark of Samsung Electronics Co., Ltd. Do you have questions about your Samsung Mobile Device?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsung.com/us/support Nuance, VSuite, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its affiliates in the United States and/or other countries. ACCESS and NetFront are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries. The Bluetooth word mark, figure mark (stylized B Design), and combination mark (Bluetooth word mark and B Design) are registered trademarks and are wholly owned by the Bluetooth SIG. microSD and the microSD logo are Trademarks of the SD Card Association. Openwave is a registered Trademark of Openwave, Inc. Google, the Google logo, Android, the Android logo, Google Play, Gmail, Google Mail, Google Maps, Google Music, Google Talk, Hangouts, Picasa, YouTube and other marks are trademarks of Google Inc. Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc. LTE is a trademark of ETSI Swype and the Swype logos are trademarks of Swype, Inc. 2010 Swype, Inc. All rights reserved. DRAFT Internal Use Only Dynamic Noise Suppression from Audience Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise, intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard nearly anywhere. How Does It Work?
Based on the intelligence of the human hearing system, the technology:
Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with.
Then isolates the primary voice in conversation and filters out the background noise - so the person you're calling hears only your voice, without disturbing background noise.
Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome surrounding noise. The noise suppression technology is built-in and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice clarity with every call. DRAFT Internal Use Only Table of Contents Section 1: Getting Started .......................... 6 Understanding this User Manual . 6 Battery Cover . 7 Battery . 11 Extending Your Battery Life . 14 Switching the Device On or Off . 15 Initial Device Configuration . 15 Restarting the Device . 18 Locking and Unlocking the Device . 18 Creating a Samsung Account . 18 Voicemail . 19 Visual Voicemail . 20 Task Manager . 21 Section 2: Understanding Your Device .... 23 Features of Your Device . 23 Front View . 24 Back View . 26 Side Views . 27 Status Bar . 27 Home Screen . 33 Screen Navigation . 37 Menu Navigation . 39 Customizing the Screens . 40 Section 3: Call Functions and Contacts List ..............................................47 Displaying Your Phone Number . 47 Making a Call . 47 Ending a Call . 48 Making Emergency Calls . 49 Dialing Options . 50 Answering a Call . 51 Managing Reject Calls . 51 International Calls . 52 Pause Dialing . 53 Wait Dialing . 53 Redialing the Last Number . 54 Speed Dialing . 54 In Call Options . 56 1 DRAFT Internal Use Only Logs Tab . 60 Section 4: Entering Text ............................64 Text Input Methods . 64 Selecting the Text Input Method . 64 Entering Text Using Swype . 65 Using the Samsung Keyboard . 69 Using the Google Voice Typing . 72 Section 5: Contacts ...................................74 Accounts . 74 Contacts List . 74 Contact List Options . 80 Contact Menu Options . 80 Contact Entry Options . 81 Linking Contact Information . 82 Sending a Namecard . 84 Copying Contact Information . 86 Synchronizing Contacts . 87 Display Options . 88 Adding more Contacts via Accounts and Sync . 88 Additional Contact Options . 89 Groups . 90 The Favorites Tab . 92 2 Section 6: Messaging ...............................93 Types of Messages . 93 Creating and Sending Messages . 93 Message Options . 95 Viewing Newly Received Messages . 98 Deleting Messages . 100 Message Search . 101 Messaging Settings . 101 Assigning Messages as Spam . 104 Accessing Your Spam Folder . 106 Text Templates . 106 Using Email . 106 Microsoft Exchange Email (Outlook) . 111 Section 7: Multimedia .............................117 Assigning the Default Storage Location . 117 Using the Camera . 118 Camera Options . 119 Quick Settings . 121 Camera and Camcorder Settings . 121 Using the Camcorder . 125 Sharing Pictures . 127 Editing a Photo . 133 DRAFT Internal Use Only The Gallery . 134 AllShare Cast Hub . 134 Section 8: Applications and Development ............................................ 136 Applications . 136 Calculator . 138 Calendar . 138 Camera . 140 Chrome . 141 Clock . 141 Contacts . 145 Downloads . 145 Dropbox . 145 Email . 147 Gallery . 148 Gmail . 148 Google . 150 Google Settings . 151 Google + . 151 Group Play . 152 Hangouts . 153 Help . 154 Internet . 154 Isis Wallet . 161 Local . 162 Lookout Security . 162 Maps . 163 Media Hub . 166 Memo . 168 Messaging . 169 Messenger . 169 Mobile HotSpot . 170 Music . 170 Using Playlists . 173 Creating a Playlist . 173 Transferring Music Files . 174 Removing Music Files . 175 Music Hub . 175 My Files . 176 Navigation . 178 Phone . 180 Play Books . 180 Play Magazines . 181 Play Movies & TV . 181 3 DRAFT Internal Use Only Play Music . 182 Play Store . 189 Downloading a New Google Application . 189 Launching an Installed Google Application . 191 S Translator . 192 Using S Voice . 193 Samsung Apps . 194 Settings . 195 T-Mobile My Account . 195 T-Mobile Name ID . 196 T-Mobile TV . 196 Video . 197 Visual Voicemail . 198 Voice Recorder . 198 Voice Search . 199 YouTube . 200 Section 9: Connections ...........................202 Bluetooth . 202 Enable Downloading for Web Applications . 206 PC Connections . 207 Wi-Fi . 208 USB Tethering . 210 4 Mobile HotSpot . 211 Section 10: Changing Your Settings ......214 Accessing the Settings Tabs . 214 Settings Tabs - Overview . 214 Wi-Fi Settings . 215 Bluetooth settings . 220 Data Usage . 222 More Networks . 223 Lock Screen . 234 Display Settings . 240 Sound Settings . 241 Home Screen Mode . 244 Call Settings . 244 Blocking Mode . 254 Driving Mode . 255 Power Saving Mode . 255 Accessory . 256 Accessibility Settings . 256 Language and Input Settings . 258 Smart screen . 265 Voice control . 265 Add Account . 266 DRAFT Internal Use Only Cloud . 267 Backup and Reset . 268 Backing up Your Data Before Factory Reset . 269 Location Services . 273 Security . 274 Application Manager . 277 Battery Usage . 279 SD Card & Device Storage . 280 Date and Time . 281 About Device . 282 Software Update . 283 Section 11: Health and Safety Information .............................................. 284 Exposure to Radio Frequency (RF) Signals . 284 Specific Absorption Rate (SAR) Certification Information . 289 FCC Part 15 Information to User . 291 Commercial Mobile Alerting System (CMAS) . 291 Smart Practices While Driving . 291 Battery Use and Safety . 293 Samsung Mobile Products and Recycling . 294 UL Certified Travel Charger . 296 Display / Touch-Screen . 296 GPS & AGPS . 297 Emergency Calls . 298 Care and Maintenance . 298 Responsible Listening . 299 Operating Environment . 301 FCC Hearing Aid Compatibility (HAC) Regulations for Wireless Devices . 303 Restricting Children's Access to Your Mobile Device . 305 FCC Notice and Cautions . 305 Other Important Safety Information . 306 Section 12: Warranty Information ..........308 Standard Limited Warranty . 308 End User License Agreement for Software . 313 Index .........................................................321 5 DRAFT Internal Use Only Section 1: Getting Started This section explains how to get started with your phone by installing and charging the battery, installing the micro SIM card and optional memory card, and setting up your voice mail. Before using your device for the first time, youll need to install and charge the battery and install the micro SIM card. The micro SIM card is loaded with your subscription details, such as your PIN, available optional services, and many other features. If desired, you can also install an SD card to store media for use with your phone. Understanding this User Manual The sections of this manual generally follow the features of your phone. A robust index for features begins on page 321. Also included is important safety information that you should know before using your phone. This information is available near the back of the guide, beginning on page 284. This manual provides navigation instructions according to the default display settings. If you select other settings, navigation may be different. 6 Unless otherwise specified, all instructions in this manual assume you are starting from the Home screen and using the available keys. Note: Instructions in this manual are based on default settings, and may vary from your device, depending on the software version on your device, and any changes to the devices Settings. Unless stated otherwise, instructions in this User Manual start with the device unlocked, at the Home screen. All screen images in this manual are simulated. Actual displays may vary, depending on the software version of your device and any changes to the devices Settings. DRAFT Internal Use Only Special Text Throughout this manual, youll find text that is set apart from the rest. These are intended to point out important information, share quick methods for activating features, to define terms, and more. The definitions for these methods are as follows:
Notes: Presents alternative options for the current feature, menu, or sub-menu.
Tips: Provides quick or innovative methods, or useful shortcuts.
Important: Points out important information about the current feature that could affect performance.
Warning: Brings to your attention important information to prevent loss of data or functionality, or even prevent damage to your phone. Text Conventions This manual provides condensed information about how to use your phone. To make this possible, the following text conventions are used to represent often-used steps:
Arrows are used to represent the sequence of selecting successive options in longer, or repetitive, procedures. Example: From the Home screen, press Connections tab Bluetooth.
(Menu) Settings Battery Cover The battery, micro SIM card and SD card are installed under the battery cover. Important! Before removing or replacing the battery cover, make sure the device is switched off. To turn the device off, hold down the Device options pop up displays, then tap Power off. key until the Caution! Do not bend or twist the back cover excessively during installation or removal. Doing so may damage the cover. To remove the battery cover:
1. Hold the device firmly and locate the cover release latch (1). 2. Place your fingernail in the opening (2) and firmly pop the cover off the device (similar to a soda can). Getting Started 7 DRAFT Internal Use Only SIM Card Overview Important! Before removing or replacing the micro SIM card, make sure the device is switched off. To turn the phone off, hold down the Device options pop up displays, then tap Power off key until the The micro SIM card is loaded with your subscription details such as your telephone number, PIN, available optional services, and many other features. Important! The micro SIM card and its information can be easily damaged by scratching or bending, so be careful when handling, inserting, or removing the card. Keep all SIM cards out of reach of small children. Some features on your device (such as Wi-Fi Calling) can be unlocked by using the new micro SIM card. To use this new micro SIM card, call or contact T-Mobile customer service for more information. This card contains the necessary information for identifying and authenticating the user to the IMS (IP Multimedia Subsystem). Release Latch To replace the battery cover:
Position the battery cover over the battery compartment and press down until you hear a click. 8 DRAFT Internal Use Only Installing and Removing the SIM card This device uses a different type of SIM card called a micro SIM. Other larger SIM cards will not function or fit within this slot. To install the SIM card:
1. Carefully slide the micro SIM card into the SIM card socket until it clicks into place. To remove the micro SIM card:
1. Remove the battery cover. 2. Remove the battery (page 11). 3. Carefully place your fingernail into the end of the micro SIM slot and begin to pull the card slightly out. 4. Carefully slide the card out of the micro SIM card socket. Note: If the card is not inserted correctly, the device will not detect it and no service will be available. If this happens, turn off the device, remove the card, and reinstall the card in the correct orientation. Micro SIM card 2. Make sure that the cards gold contacts face into the phone and that the upper-left angled corner of the card is positioned as shown. Getting Started 9 DRAFT Internal Use Only Installing the microSD Memory Card Your device supports an optional (external) microSD memory cards for storage of media such as music, pictures, video and other files. The SD card is designed for use with this mobile device and other devices. Note: This device supports a memory card of up to a 64GB. 1. Remove the battery cover. 2. Locate the microSD card slot on the inside of the device. 3. Orient the card with the gold strips facing down. 4. Carefully slide the microSD card into the card socket until it clicks into place. Important! Be sure to align the gold contact pins on the card with the phones contact pins. 10 Removing the microSD Memory Card 1. Remove the battery cover. 2. Remove the battery (page 11). 3. Carefully place your fingernail into the end of the micro SIM slot and begin to pull the card slightly out. 4. Remove the card from the slot. 5. Replace the battery cover. DRAFT Internal Use Only Removing the Battery Grip the battery at the top end (3) and lift it up and out of the battery compartment (4). Installing Battery Battery Before using your device for the first time, install the battery and charge it fully. Important! Before removing or replacing the battery, make sure the device is switched off. To turn the device off, hold down the options pop up displays, then tap Power off key until the Device Installing the Battery 1. Slide the battery into the compartment (1) so that the tabs on the end align with the slots at the bottom of the phone, making sure the connectors align. 2. Gently press down to secure the battery (2). Removing Battery Getting Started 11 DRAFT Internal Use Only Charging the Battery Your device is powered by a rechargeable Li-ion battery. A wall charger, which is used for charging the battery, is included with your device. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. Before using your device for the first time, you must fully charge the battery. A discharged battery recharges fully in approximately 4 hours. Charging Head USB Cable 12 Note: Verify that the battery is installed prior to connecting the wall charger. If both the wall charger is connected and the battery is not installed, the handset will power cycle continuously and prevent proper operation. Failure to unplug the wall charger before you remove the battery, can cause the device to become damaged. Important! It is recommended you fully charge the battery before using your device for the first time. 1. Connect the USB cable to the charging head. 2. Locate the Charger/Accessory jack. 3. Insert the USB cable into the devices Charger/
Accessory jack. 4. Plug the charging head into a standard AC power outlet. The device turns on with the screen locked and indicates both its charge state and percent of charge. DRAFT Internal Use Only Warning! While the device is charging, if the touch screen does not function due to an unstable power supply unplug the USB power adapter from the power outlet or unplug the USB cable from the device. 5. When charging is finished, first unplug the chargers power plug from the AC wall outlet, then disconnect the chargers connector from the phone. Important! If your handset has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. For more information, refer to Standard Limited Warranty on page 308. Note: If the charger is incorrectly connected, damage to the accessory port will occur therefore voiding the phones warranty. Getting Started 13 DRAFT Internal Use Only Low Battery Indicator When the battery level is low and only a few minutes of talk time remain (~15% charge), a warning tone sounds and the Battery low message repeats at regular intervals on the display. In this condition, your device conserves its remaining battery power, by dimming the backlight. When the battery level becomes too low, the device automatically turns off. The on-screen battery charge is represented (by default) as a colored battery icon. You can also choose to display a percentage value. Having a percentage value on-screen can provide a better idea of the remaining charge on the battery. Press and then tap Settings My device tab Display Show battery percentage. For more information, refer to Display Settings on page 240. 14 Extending Your Battery Life Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your battery. The following is a list of helpful tips that can help conserve your battery power:
Reduce your backlight on time.
Turn Bluetooth off when not in use.
Turn Wi-Fi off when not in use.
Deactivate the GPS when not needed. Most applications using this function will periodically query the GPS satellites for your current location; each query drains your battery.
Do not wait until your battery is completely depleted before charging your device. Repeating this process of a complete discharge and recharge can over time reduce the storage capacity of any battery.
Turn off Automatic application sync.
Use the Power Saving feature to deactivate some hardware and interface functions.
Check the Battery use screen to review what features or functions have been consuming your battery resources.
Check the Running Services and close any unnecessary applications. DRAFT Internal Use Only Use the Task Manager feature to end/shutdown background applications that are still running. These minimized applications can, over time, cause your device to slow down.
Turn off any streaming services after use (see Running Services).
Animated wallpapers use processing power, memory, and more power. Change your Live Wallpaper to a non-animated Wallpaper gallery or Gallery image. Switching the Device On or Off Once the device has been configured, you will not be prompted with setup screens again. To turn the device on:
Press and hold
(Power/End) until the device switches on. The device searches for your network and after finding it, you can make or receive calls. Note: The display language is preset to English at the factory. To change the language, use the Language menu. For more information, refer to Language and Input Settings on page 258. To turn the device off:
1. Press and hold
(Power/End) until the Device options screen appears. 2. Tap Power off (
). Initial Device Configuration 1. Select a language from the associated field. English is the default language. Note: If you are visually impaired or have difficulty hearing, tap Accessibility to configure the accessibility settings. 2. Tap Next. Note: You may be prompted with a notification that your activation is completed. 3. At the Wi-Fi screen, move the slider to activate the feature and connect to either an existing Wireless Access Point (WAP) or tap Next to continue. If prompted, assign the Date and time settings. Enable the Automatic date and time field, select a time zone, and tap Next. 4. Getting Started 15 DRAFT Internal Use Only If you disable the Automatic date and time feature, you can 6. At the Got Google? screen, choose either Yes to log into then manually assign this information. Note: The Date and time menu may not appear if automatically detected via your internal microSIM card. 5. At the Samsung account screen, select one of the following options:
If this is your first time, tap Create new account.
If you have previously created a Samsung account, tap Sign in. or Tap Skip to continue with the setup process and create an account later. For more information, refer to Creating a Samsung Account on page 18. your existing Google account or No to continue.
If you selected Yes, on the Sign in screen, enter your current
) Next. Google Email and Password information and tap (
Tap OK to agree to the Google legal agreements.
If prompted to enable purchases, tap Set up credit card and enter your credit card information and click Save.
Click Skip to continue without entering this information. If you indicated that you did not have a current Google account, then at the Make it Google screen, choose either Get an account to create a new account or Not now to continue. 7. 8. Select/deselect the desired Google & location services and tap
(Next). Note: Enabling Google location services can drain battery power. 16 DRAFT Internal Use Only 9. When prompted, enter a First and Last name then tap 13. Accept the current device name.
(Next). This will help to identify this as your device. 10. When prompted with the Dropbox activation screen, you can choose to either: Create account, Sign in, Disclaimer, or tap Skip to continue. Note: For more information, refer to Dropbox on page 145. 11. From the Learn about key features screen:
Tap an available field to display an on-screen tutorial.
Turn on a feature by sliding the activation slider to the ON position (
12. Tap Next. ONON
). or Tap the Device name field and use the on-screen keyboard to rename your device. Important! The device name is also used to provide an identification for your devices Bluetooth and Wi-Fi Direct names. 14. Tap Finish to complete the setup process. 15. Read the on-screen Collect diagnostics information. Note: This software collects only diagnostic data from your device so that T-Mobile technicians can better troubleshoot issues with your device. 16. Select either More Info... (to read additional information) or Close to close the message screen. Getting Started 17 DRAFT Internal Use Only Important! Selecting Close only closes the current description screen and does not disable data collection. To disable data collection, go to Settings Accounts tab Collect diagnostics and turn off the Allow Diagnostics feature. For more information, refer to Collect Diagnostics on page 273. Backup and reset Restarting the Device 1. Press and hold
(Power/End) until the Device options screen appears. 2. Tap Restart (
). Locking and Unlocking the Device By default, the device screen locks when the backlight turns off. Place your finger on the screen and swipe the glass in any of the directions shown unlock the device. Note: You can choose to configure lock settings to prevent unauthorized use of your device. For more information, refer to Security on page 274. 18 Creating a Samsung Account Just as important as setting up and activating a Google account to help provide access to Play Store, etc.. An active Samsung account is required to begin accessing applications such as Samsung Hub. Note: The Samsung account application will manage your access to the previously mentioned applications, and there is no longer a need to remember different passwords for each application. 1. From the Home screen, press and then tap Settings
(Accounts tab). 2. Navigate to the My accounts area and then tap 3. Add account Samsung account. If you have previously created a Samsung account, tap Sign in. or If this is your first time, tap Create new account. DRAFT Internal Use Only 4. Follow the on-screen instructions. Note: You may be prompted to confirm your credentials via email. 5. If prompted, follow the on-screen instructions to verify your account via the provided email address. Note: Without confirming your email address and following the documented procedures, related applications will not function properly since it is Samsung account that is managing their username and password access. Voicemail Setting Up Your Voicemail Your device automatically transfers all unanswered calls to voicemail, even if your device is in use or turned off. As soon as your battery is charged and the micro SIM card inserted, activate your voicemail account. Important! Always use a password to protect against unauthorized access. For new users, follow the instructions below to set up voice mail:
Note: Voicemail setup may be different depending on your network. 1. From the Home screen, tap and then touch and hold the You may be prompted to enter a password. key until the device dials voicemail. 2. Follow the tutorial to create a password, a greeting, and a display name. Getting Started 19 DRAFT Internal Use Only To check Visual Voicemail messages:
1. From the Home screen, tap
(Apps)
(Visual Voicemail). 2. Tap the voicemail message you want to play. 3. Tap
(Play). To delete Visual Voicemail messages:
1. From the Home screen, tap
(Apps)
(Visual Voicemail). 2. Tap the voicemail message you want to delete. 3. Tap
(Delete) OK. Accessing Your Voicemail To access Voice Mail using the menu:
1. From the Home screen, tap and then touch and hold until the device dials voicemail. 2. When connected, follow the voice prompts from the voicemail center. Visual Voicemail Visual Voicemail enables users to view a list of people who left a voicemail message, and listen to the any message they want without being limited to chronological order. 1. From the Home screen, tap
(Apps)
(Visual Voicemail). 2. Read the on-screen information and tap Next. Note: You must subscribe to the Visual Voicemail service to use this feature. Charges may apply. Please contact your service provider for further details. 3. Tap an on-screen voicemail message to play it back. 20 DRAFT Internal Use Only Task Manager Your device can run applications simultaneously, with some applications running in the background. Sometimes your device might seem to slow down over time, and the biggest reason for this are background applications. These are applications that were not properly closed or shutdown and are still active but minimized. The Task Manager not only lets you see which of these applications are still active in the background but also easily lets you choose which applications are left running and which are closed. Note: The larger the number of applications running on your phone, the larger the energy drain on your battery. Task Manger Overview Press and hold
(Home) and then tap
(Task manager). This screen contains the following tabs:
Active applications display those currently active applications running on your phone.
Downloaded displays any installed packages or applications from the Play Store that are taking up memory space. Tap Uninstall to remove them from your phone.
RAM, which displays the amount of current RAM (Random Access Memory) currently being used and allow you to Clear Memory.
Clear defaults allows you to clear which applications are launched by default.
Storage displays a visual graph indicating the available and used space within the System storage and external SD card. Getting Started 21 DRAFT Internal Use Only Shutting Down an Currently Active Application Press and hold
(Home) and then tap
(End all) or 1. Press and hold
(Task manager).
(Home) and then tap 2. From the Active applications tab, tap End to close selected applications. or Tap End all to close all background running applications. 22 DRAFT Internal Use Only Section 2: Understanding Your Device This section outlines key features of your device. It also describes the devices keys, screen and the icons that display when the device is in use. Features of Your Device Your device is lightweight, easy-to-use and offers many significant features. The following list outlines a few of the features included in your device.
Touch screen with virtual (on-screen) QWERTY keyboard
Brilliant 4-inch WVGA screen (480x800)
Delivering data speeds faster than the current 3G network technology by using 4G LTE and High Speed Packet Access Plus
(HSPA+).
Android 4.2.2, Jelly Bean Platform
Smart Switch compliant. For more information, see www.samsungsmartswitch.com
Wi-Fi Capability
Apps available to download from the Google Play Store and Samsung Apps
Access Movies, TV Shows, Music, Games, and Books with Samsung Hub
Compliant with AllShare Cast Hub
5 Megapixel Camera and Camcorder with autofocus and digital zoom
VGA Front Facing camera for Video Chat
Share Shot picture sharing functionality
S-Beam file transfer technology
Share Shot camera sharing-capable via multi-connect Wi-Fi Direct connection
Bluetooth enabled
NFC-compatible
Full Integration of Google Mobile Services (Gmail, YouTube, Google Maps, Google Voice Search)
Multiple Messaging Options: Text/Picture/Video Messaging and Google Hangouts
Corporate and Personal Email
Music Player with multitasking features Understanding Your Device 23 DRAFT Internal Use Only Pre-loaded applications such as: Play Books, Play Magazines, and Play Movies
Assisted GPS (Google Navigation)
Webkit-based browser
Expandable memory slot - supports up to 64GB microSD
Mobile HotSpot and USB Tethering-capability
T-Mobile TV
Video Chat via Google Hangouts
Google Play Music
Wi-Fi Calling via the use of a micro SIM card
NFC Wallet support via Isis Wallet 24 Front View The following illustrations show the main elements of your device. The following list correlates to the illustrations. 1. Microphones are used during phone calls and allow other callers to hear you clearly when you are speaking to them. There are two microphones on the device:
Bottom microphone: used during handset mode.
Top microphone: used while an active call is in the speakerphone mode and assists in noise cancellation
(2 microphone solution). 2. Front Facing Camera allows you to take pictures while facing the screen and allows you to video conference. 3. Proximity Sensor detects how close an object is to the surface of the screen. This is typically used to detect when your face is pressed up against the screen, such as during a phone call.
While talking on the phone, the sensor detects talk activity and locks the keypad to prevent accidental key presses. DRAFT Internal Use Only 4. Menu key displays a list of options available for the current screen. From the Home screen it displays Add apps and widgets, Create folder, Set wallpaper, Edit page, Search, Settings options, and Help. 5. Home key displays the Home screen when pressed. Press and hold to display your recent apps, Task manager, Google Search, and Remove options. Double-press to activate S Voice. 6. USB Power/Accessory connector allows you to connect a power cable or optional accessories such as a USB/data cable. 7. Back key redisplays the previous screen or clears entries. 8. Display shows all the information needed to operate your phone, such as the connection status, received signal strength, phone battery level, and time. 9. Receiver allows you to hear the other caller. 2 3 4 1 9 8 7 5 1 6 Understanding Your Device 25 DRAFT Internal Use Only Back View The following illustration shows the external elements of your device:
1. Camera lens is used to take photos. 2. 3. External speaker allows you to hear ringers, music, and Flash is used to take photos in low-light conditions. other sounds offered by your phone. 4. micro SIM Card Slot (internal) Installation location for SIM card. 5. microSD Card Slot (internal) allows you use a microSD card to expand the memory of your device. 3 2 1 6 4 5 6. Headset jack allows you to connect a hands-free headset so you can listen to music. 26 DRAFT Internal Use Only Side Views The following illustration shows the side elements of your device:
1 2 1. Volume key allows you to adjust the ringer volume in Status Bar The Status Bar shows information about the connection status, signal strength, phone battery level, and time, and displays notifications about incoming messages, calls and other actions. This list identifies the icons you see on your phones display screen:
Indicator Icons This list identifies the symbols youll see on your devices display and Indicator area:
Note: Some Notification icons can be hidden manually by toggling the status of the Notification panel function. For more information, refer to Accessing Additional Screen Functions on page 37. standby mode (with the phone open) or adjust the voice volume during a call. When receiving an incoming call:
Pressing the volume key down mutes the ring tone. 2. Power/End key ends a call or switches the phone off and on. Press and hold for two seconds to turn toggle the Silent mode or Airplane mode states, turn the device on or off, or Restart. Displays your current signal strength. The greater the number of bars, the stronger the signal. Indicates that the Airplane Mode is active. You cannot send or receive any calls or access online information. Understanding Your Device 27 DRAFT Internal Use Only Indicates there is no signal available. Displays when there is no SIM card in the phone. Displays when there is a system error or alert. Displays to indicate a security warning. You are prompted to set a screen lock password. Displays when the NFC function is active. Displays when a call is in progress. Icon is displayed in the Status bar area. Displays when a call is on hold. Icon is displayed in the Status bar area. Displays when an active call is routed through a Bluetooth headset. Icon is displayed in the Status bar area. Displays when you have missed an incoming call. Displays when you device is set to automatically reject all incoming calls. The All numbers option is enabled from within Call settings Call rejection Auto reject mode menu. Displays when the speakerphone is on. Icon is displayed in the Status bar area. Displays when the microphone is muted. Icon is displayed in the Status bar area. Displays when Call forwarding is set to Always forward. Displayed in the Status bar when the current call is minimized. For more information, refer to Configuring Additional Voice Call Settings on page 249. Displays your current battery charge level. Icon shown is fully charged. Displays when the current battery is 100 percent charged and the Display battery percentage option is enabled within the Settings My device tab Display menu. Displays your battery is currently charging. 100%100%
28 DRAFT Internal Use Only Displays your current battery charge level is low (Charge: ~28% - 15%). Displays your current battery charge level is very low (Charge: ~15% - 5%). Shows your current battery only has up to 4%
power remaining and will soon shutdown.
(Charge: ~4% - 1%). Displays when connected to the EDGE network. Displays when your phone is communicating with the EDGE network. Displays when connected to the 3G network. 3G indicator is only seen when roaming. Displays when your phone is communicating with the 3G network. 3G indicator is only seen when roaming. Displays when connected to the HSPA+ network. Displays when your phone is communicating with the HSPA+ network. Displays when your phone is communicating with the 4G LTE network. Displays when the phone has detected an active USB connection and is in a USB Debugging mode. Displays when there is a new text message. Displays when an outgoing text message has failed to be delivered. Displays when an incoming text message content has failed to be downloaded. Displays when there is a new voicemail message. Displays when there is a new visual voicemail message. Displays in the notifications window when there is a new Email message. Displays in the notifications window when there is a new Gmail message. Displays when a new Google+ notification has been received. Understanding Your Device 29 DRAFT Internal Use Only Displays when the user is prompted to set up a new Dropbox account. Displays when the user is prompted with a Lookout Security notification. Displays when the T-Mobile Name ID application did not recognize a recent number and would like to know whether you wish to Not add, or add as a New or Existing number. Displays when the time and date for a Calendar Event has arrived. For more information, refer to Calendar on page 138. Displays when an alarm is set. For more information, refer to Setting an Alarm on page 141. Displays when the device is in Silent mode. All sounds except media and alarms are silenced, and Silent mode is set to Vibrate. For more information, refer to Silent mode via Device Options Screen on page 241. 30 Displays when the device is in Silent mode. All sounds are silenced, and Silent mode is set to Mute. Displays when data synchronization and application sync is active and synchronization is in progress for Gmail, Calendar, and Contacts. Displays when the Blocking mode feature is active. For more information, refer to Blocking Mode on page 254. Displays when the Driving Mode is active. For more information, refer to Driving Mode on page 255. Displays when Bluetooth technology is active and enabled. Displays when the Bluetooth technology is active and communicating with an external device. Displays when the an outbound file transfer is in progress. Displays when a file or application download is in progress. DRAFT Internal Use Only Displays when the Share shot option is enabled from within the Camera Shooting mode menu and images and being shared via Wi-Fi Direct. For more information, refer to Camera Options on page 119. Displays when a screen capture has been taken and stored in the clipboard. Displays when your device is connected being used to control streaming media and is connected to a Digital Living Network Alliance (DLNA) certified devices. Displays when your device is currently sharing/
streaming media to paired device using the Samsung Link application. Displays when AllShare Cast Hub is active, connected to your device, and communicating. For more information, refer to AllShare Cast Hub on page 134. Displays when updates are available for download. Displays when a Play Store download has completed. Displays when Hangout updates are available for download. For more information, refer to Hangouts on page 153. Displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point
(WAP). Displays when Wi-Fi is active and there is an available open wireless network. Displays when Wi-Fi Direct is communicating with another compatible device. Displays to alert you to disable an active Wi-Fi Direct connection if not in use - to conserve battery power. Displays when the USB Tethering mode is active and communicating. For more information, refer to USB Tethering on page 210. Understanding Your Device 31 DRAFT Internal Use Only Displays when Wi-Fi is being used as a Mobile HotSpot feature is active and communicating. For more information, refer to Mobile HotSpot on page 211. Displays when a share shot has been established with other users via a Wi-Fi Direct connection. Displays when the Wi-Fi Calling feature is active. Minutes used while connected to the Wi-Fi network count against available rate plan minutes. Displays when the Wi-Fi Calling feature is active and you are using it with within your current active call. Displays when there is an error in the use or 911 registration of the Wi-Fi Calling feature. Displays when you are currently in Emergency calling mode. You must exit this mode to resume normal calling function. Displays in the notifications window when a new T-Mobile account information is available. 32 Displays in the notifications window when there are too many on-screen notification icons to display. Tap to show more notifications. Tap to select a text input method. Displays in the notifications window when a song is currently playing within the Music application. Displays in the notifications window when a song is currently playing within the Play Music application. Displays when your devices GPS is on and communicating. Displays when the external SD card (internal microSD) has been disconnected (unmounted) from the phone and is now ready for either removal or formatting. Displays when the External SD card is being prepared for mounting to the device. This is required for communication with the External SD card. DRAFT Internal Use Only Displays when the microSD card has been improperly or unexpectedly removed. Displays when storage within either the internal location or the external SD card has reached its capacity. It is recommended you either move files off or delete them to make additional room. Displays when Power saving mode is enabled. Displays when the Power saving alert notification has been activated. You are then prompted to view your current battery level. Displays when TTY device has been inserted. For more details on configuring your phones settings, see Changing Your Settings on page 214. Home Screen The Home screen is the starting point for using the applications on your phone. There are initially seven available panels, each populated with default shortcuts or applications. You can customize each of these panels. Connection Status Status Bar Notification area Status area Shortcuts Signal strength Battery status Time Widget Google Search Home Screen Primary Shortcuts Understanding Your Device 33 DRAFT Internal Use Only Notification area displays those icons associated with end-user notifications such as: email messages, calls (missed, call in progress), new voicemail, upcoming event, USB connection, Emails, and Text/MMS messages. These notifications appear at the top-left of the screen (within the Status bar area) and display important user information. This information can be accessed by swiping down from the Status bar (page 36).
Status area displays those icons associated with the status of the device such as communication, coverage, Bluetooth, 4G/3G, Wi-Fi communication, battery levels, GPS, etc.
Home Screen is a customizable screen that provides information about notifications and device status, and allows access to application Widgets.
Extended Home Screens extend beyond the current visible screen width to provide more space for adding icons, widgets, and other customization features. There are six available extended screens (panels) each of which may be populated with its own shortcuts or widgets. These screens share the use of the five Primary Shortcuts. The current screen is indicated at the bottom by a white square. Up to seven (7) total screens are available. 34 Note: Both the status bar and primary shortcuts are visible across all screens.
Google search is an on-screen Internet search engine powered by Google. Tap to access the Voice Actions feature where you can verbally enter a search term and initiate an online search. Tap
(Voice Actions) to launch the function from within this Google widget.
Widgets are self-contained on-screen applications (not shortcuts). These can be placed onto any of the available screens
(Home or extended).
Shortcuts are icons that launch available device applications such as Camera, YouTube, Contacts, Phone, Email, Play Store, etc. These function the same as shortcuts on your computer. Although some may already be found on the Extended Home screens, the majority can also be found within the Applications screens. The Application screens can be accessed by tapping
(Apps) from the Primary shortcuts area. Shortcuts can be removed from a screen and added back any number of times. DRAFT Internal Use Only Primary Shortcuts: are four shortcuts present throughout all of the available screens and can be used to both navigate within the device or launch any of the following functions:
Phone (
) launches the phone-related screen functions
(Keypad, Logs, Favorites, and Contacts). Contacts (
) launches the Contacts-related screens
(Phone, Groups, Favorites, and Contacts). Messaging (
) launches the Messaging menu (create new messages or open an existing message string). Internet (
Apps launches the Applications page.
) launches the built-in Web browser.
(Apps) to access the Applications screens.
Tap
While in the Applications screens, tap
(Back) to easily return to the Home screen. As you transition from screen to screen, a screen indicator
(located at the bottom) displays the currently active panel. Home Screen Menu Settings When on the Home screen, press the following menu options:
Add apps and widgets allows you to quickly access the Widget and then select any of tab where you can then drag a selected widget to an available area on a selected screen.
Create folder allows you to create on-screen folders to help organize files of application shortcuts.
Set wallpaper allows you to assign the current wallpaper for the Home screen, Lock screen, or Home and lock screens. Choose from Gallery, Live wallpapers, or Wallpapers.
Edit page allows you to add or remove extended screens from your device. You can have up to six extended screens (one Home screen and six Extended screens).
Search displays the Google Search box that you can use to search for a key term online.
Settings provides quick access to the devices settings menu. The Settings menu can also be accessed by pressing and then tapping Settings.
Help displays the on-screen Help application. For more information, refer to Help on page 154. Understanding Your Device 35 DRAFT Internal Use Only Notification Bar The Notification area indicates new message events (data sync status, new messages, calendar events, call status, etc). You can expand this area to display the Notification screen that provides more detailed information about the current on-screen notification icons. 1. Touch the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen to open the Notifications panel (1). 2. Tap a notification entry to open the associated application (2). Clearing Notifications 1. In a single motion, touch and drag the Status bar down to the bottom of the screen to open the Notifications panel. 2. Tap Clear. The notifications are cleared from the panel. 36 DRAFT Internal Use Only Accessing Additional Screen Functions In addition to notifications, this screen also provides quick and ready access to device functions. These can be quickly activated or deactivated. Scrolling across a horizontal list of functions has been enhanced with an accessible Grid view. Note: You can select the function buttons you see at the top of the Notifications panel. Only 5 buttons are shown at any one time. The Grid view is the only way to view all functions. To activate the Grid view:
From the Notification panel, tap
(Open Grid view) to display additional functions. To minimize the Grid view:
From the Notification panel, tap
(Close Grid view) to show only your primary functions. To customize the functions displayed:
1. From the Notification screen, tap
(Open Grid view) to display additional functions. 2. Tap
(Edit) then locate the Notifications panel area located at the bottom of the Notifications panel screen. In a single motion, touch and hold a desired function then drag it to the top row. 3. Screen Navigation Using the touch screen display and the keys, you can navigate the features of your device and enter characters. The following conventions are used in this manual to describe the navigation action in the procedures. Navigating Through the Screens The following terms describe the most common hardware and on-screen actions.
Press and hold: Pressing relates to use of the hardware keys and buttons to select or activate an item. For example: press the Navigation key to scroll through a menu. Some buttons and keys require you to press and hold them to activate a feature, for example, you press the Lock key to lock and unlock the device. Understanding Your Device 37 DRAFT Internal Use Only Tap: Use a brief touch to select items on the display or to enter
Pinch: Pinch the screen using your thumb and forefinger to zoom out when viewing a picture or a Web page. (Move fingers inward to zoom out.)
Spread: Spread the screen using your thumb and forefinger to zoom in when viewing a picture or a Web page. (Move fingers outward to zoom in.) Note: These screens can be re-arranged in any desired order. For more information, refer to Customizing the Screens on page 40.
Motion Navigation and Activation: The device comes equipped with the ability to assign specific functions to certain device actions that are detected by both the accelerometer and gyroscope. text on the virtual QWERTY keyboard. For example: touch an Application icon to open the application. A light touch works best.
Touch and hold: Touch and hold an icon or key to open the available options, or to access a pop-up menu. For example:
touch and hold from the Home screen to access a menu of customization options.
Flick: Move your finger in lighter, quicker strokes than swiping. This finger gesture is always used in a vertical motion, such as when flicking through contacts or a message list.
Swipe or slide: Quickly drag your finger vertically or horizontally across the screen. This allows you to move the area of focus or to scroll through a list. For example: slide your finger left or right on the Home screen to scroll among the seven panels.
Drag: Press and hold your finger with some pressure before you start to move it. Do not release your finger until you have reached the target position.
Rotate: Automatically change the screen orientation from portrait to landscape by turning the device sideways. For example: rotate to landscape orientation when entering text, to provide a larger keyboard, or when viewing web content to minimize scrolling. 38 DRAFT Internal Use Only Menu Navigation You can tailor the devices range of functions to fit your needs using both menus and applications. Menus, sub-menus, and features are accessed by scrolling through the available on-screen menus. Your device defaults with seven screens. Navigating Through the Application Menus There are three default Application Menu screens available. As you add more applications from the Play Store, more screens are created to house these new apps. 1. From the Home screen, tap
(Apps). The first Application Menu screen displays.
To close the Applications screen, press
(Home). 2. Sweep the screen to access the other menus. 3. Tap any of the on-screen icons to launch the associated application. Using Sub-Menus Sub-menus are available from within most screen and applications. 1. Press screen. A sub-menu displays at the bottom of the 2. Tap an available on-screen option. Sub-Menu items Understanding Your Device 39 DRAFT Internal Use Only Using Context Menus Context menus (also called pop-up menus) contain options that apply to a specific item on the screen. They function similarly to menu options that appear when you right click your mouse on your desktop computer. Touch and hold an item on-screen to open its context menu. Context Menu Customizing the Screens You can customize the Home screens (panels) to display the Widgets, Shortcuts, Folders, or Wallpapers. For example, one screen could contain the Music Player shortcut and other forms of media, while another screen might contain communication apps such as Gmail. You can customize your Home screen by doing the following:
Adding, Deleting, and Rearranging screens
Assigning a New Home screen
Adding and Removing Primary Shortcuts
Sharing Application Information
Managing Shortcuts
Adding and Removing Widgets
Changing the Background (Wallpapers) 40 DRAFT Internal Use Only Adding and Deleting Screens Your phone comes with seven screens. You can delete these screens and then add them back later. Rearranging the Screens 1. From the Home screen, press and then tap Edit page. Note: These screens can be deleted and re-arranged. Important! Your phone can only contain at most seven screens and at least one screen. To delete a screen:
1. From the Home screen, press and then tap Edit page. 2. Touch and hold a screen and then drag it into its new location. Upper-left is screen position #1 and bottom-right is screen last screen. Assigning a New Home Screen 1. From the Home screen, press and then tap Edit page. 2. Tap
. The new Home screen then indicates this
(Home screen) icon at the top of the selected 2. Touch and hold, then drag the undesired screen up to screen. the Remove tab (
). 3. Press to return to the main Home screen. To add a screen:
1. From the Home screen, press and then tap Edit page. 2. Tap
(Add screen). The newly added screen appears as the last page. Sharing an App The devices Applications menu now comes with a feature that allows you to share information about your selected applications with external users. 1. From the Home screen, tap 2. Press 3. Place a check mark alongside those applications you and then tap Share apps.
(Apps). 3. Press to return to the main Home screen. wish to share information about and tap Done. Understanding Your Device 41 DRAFT Internal Use Only Note: Shared applications consist of those that have previously been downloaded from the Play Store. 4. Select a sharing method. Choose from: Add to Dropbox, Bluetooth, Email, Gmail, Google, Google+, Hangouts, Memo, Messaging, and Wi-Fi Direct. 5. The recipient will be notified about the receipt of the new information. Managing Shortcuts To add a shortcut from the Applications screen:
1. From the Home screen, select a screen location for your new shortcut by scrolling across your available screens until you reach the desired one. 2. Tap Apps (
) to reveal all your current available applications. By default, applications are displayed as an Alphabetical grid. 3. Scroll across the screens and locate your desired application. 4. Touch and hold the on-screen icon. The new shortcut Note: To move a shortcut from one screen to another, you then appears to hover over the current screen. must carefully touch and hold the shortcut and slowly drag it to the edge of the screen. As the shortcut turns light blue, you can begin to move it to the adjacent screen.If this does not work, delete it from its current screen. Activate the new screen and then add the selected shortcut. 5. While still holding the on-screen icon, position it on the current screen. Once complete, release the screen to lock the shortcut into its new position. To add a shortcut via the Add to Home screen:
1. From the Home screen, navigate to a screen with an empty area. 2. Touch and hold an empty area of the screen. 3. From the Home screen window, tap Apps and widgets Apps. 42 DRAFT Internal Use Only 4. Scroll across the pages and in a single motion, touch and hold an application to place a copy on the current screen. To delete a shortcut:
1. From the Home screen, touch and hold the desired shortcut. This unlocks it from its location on the current screen. 2. Drag the shortcut over the Remove tab (
) and release it. Adding and Removing Primary Shortcuts Note: You can change any of your primary shortcuts with the exception of the Apps shortcut. To remove a primary shortcut:
From the Home screen, touch and hold the primary shortcut you want to replace, then drag it to an empty space on any available screen. The primary shortcuts are now updated to show an empty slot. To insert a new primary shortcut:
(Apps). 1. From the Home screen, tap 2. Locate your desired application, then touch and hold the on-screen icon to position it on a desired screen. For more information, refer to Managing Shortcuts on page 42. 3. Locate the screen with the desired shortcut you want to add as the new primary shortcut. 4. Touch and hold the shortcut until it detaches from the 5. screen. In a single motion, touch and hold the new shortcut, then drag it into the empty space within the row of primary shortcuts. The new primary shortcut will now appear on both the Home and Extended screens. Understanding Your Device 43 DRAFT Internal Use Only Adding and Removing Widgets Widgets are self-contained applications that can be placed on any screen. Unlike shortcuts, widgets appear as applications. To add a Widget:
1. From the Home screen, tap
(Apps) Widgets tab. 2. Scroll across the Widget pages and locate a desired Widget. 3. Touch and hold an available Widget until it detaches from the screen. 4. While still holding the Widget, scroll left or right across the available screens and let go of the Widget to place it on your current screen. To remove a Widget:
1. Touch and hold a Widget until it unlocks from the current screen. 2. Drag the widget over the Remove tab (
) and release it.
As you place the Widget into the Trash, both items turn red.
This action doesnt delete the Widget, it just removes it from the current screen. To place a widget onto a different screen:
1. Touch and hold the widget until it becomes transparent. 2. Slowly drag it past the edge of the screen until the adjacent page appears highlighted and it then snaps onto the new page. 3. Drag the widget to its desired position on the new screen. 4. Repeat these steps to continue moving it to other screens. 44 DRAFT Internal Use Only Managing Wallpapers Wallpapers consist of either Gallery images (user taken), Live wallpapers (animated backgrounds), or Wallpaper gallery
(default phone wallpapers). Note: Selecting animated Live wallpapers will require additional battery power. To change the current Home screen wallpaper:
1. Navigate to any screen. or Press to go to the Home screen. 2. Touch and hold an empty area of the screen. 3. From the Home screen window tap Set wallpaper Home screen. 4. Select a Wallpaper type:
Tap Gallery to select from a user image stored in the camera image gallery, crop the image, and tap Done.
Tap Live wallpapers to select from a list of animated backgrounds, once done tap Set wallpaper.
Tap Wallpapers, scroll through the images, tap a wallpaper image, then tap Set wallpaper. Note: Wallpapers supports the following image types: JPEG, PNG, GIF, BMP, and WBMP. To change Wallpapers from Settings Menu:
1. From the main Settings page, tap My device tab Display Wallpaper. or Touch and hold an empty area of the screen and select Set wallpaper. 2. Choose from Home screen, Lock screen, or Home and lock screen. Note: The Home and lock screens is an additional option that allows you to change both screens at the same time. 3. Select a wallpaper type (Gallery, Live wallpaper, or Wallpapers). 4. Choose an image and tap Done or Set wallpaper. Understanding Your Device 45 DRAFT Internal Use Only To change the current Lock screen wallpaper:
1. Navigate to any screen, touch and hold an empty area of the screen, and tap Set wallpaper Lock screen. or From the main Settings page, tap My device tab Display Wallpaper Lock screen. 2. Select a Wallpaper type:
Tap Gallery to select from a user image stored in the camera image gallery, crop the image, and tap Done.
Tap Wallpapers scroll through the images, tap a wallpaper image, then tap Set wallpaper. 46 DRAFT Internal Use Only Section 3: Call Functions and Contacts List This section describes features and functionality associated with making or answering calls, and the Contacts list, which is used to store contact information. Displaying Your Phone Number From the Home screen, press
(More tab) Settings Status. Your phone number displays in the My phone number field. and then tap About device Note: The devices Settings menu can also be activated
(Apps) and then tapping by pressing
(Settings). Making a Call You can store phone numbers that are regularly used to the SIM card or to the devices memory. These entries are referred to as the Contacts list. 1. From the Home screen, tap 2. Enter the phone number and then tap
(Phone). If you make a mistake while dialing, tap clear the last digit. Touch and hold entire sequence. to to clear the Note: When you activate the Auto redial option in the Call settings Additional settings menu, the device automatically redials up to 10 times when the person does not answer the call or is already on the phone, provided your call is not sent to voicemail. Call Functions and Contacts List 47 DRAFT Internal Use Only Quick Dialing a Number from the Contacts List 1. From the Home screen, tap 2. Locate a contact from the list. 3.
(Contacts). In a single motion, touch and drag your finger over the number by going to the right. This action places a call to the recipient. Ending a Call Briefly tap key to end the call. Note: To redial a recent number, tap at the end of the call Call or locate the number from the Logs list, tap the entry and tap
(Call). Running a Call in the Background If you exit the current call screen and return to the Home screen, you are visually notified that you are still on an active call by the green phone icon within the Status bar. This is the best way to stay on your current call and do something else (multi-task) such as access the Contacts list, view a recent email, locate a picture, etc.. In Call Notification Ending a Call from the Status Bar 1. From an active call, you can launch a separate application or return to the Home screen. The current call is kept active in the background. 2. Tap the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen to open the Notifications panel. 3. Tap End to end the currently active call. 48 DRAFT Internal Use Only Making Emergency Calls If you do not have a SIM card installed the first time you turn on the phone, the Insert SIM card to make calls message displays and an animated tutorial shows you how to install the SIM card. Without a SIM card, you can only make an emergency call with the phone; normal cell phone service is not available. Making an Emergency Call Without a SIM card installed 1. Tap Emergency call from the on-screen display to make an emergency call. 2. Enter 9-1-1 and tap
. Complete your call. Making an Emergency Call With a SIM card installed The Emergency calling mode makes redialing an emergency number a 1-tap process. Before you can resume normal calling operations, you should first exit this mode. 1. Swipe the Lock screen to unlock the device. 2. From the Home screen, tap 3. Enter the emergency number (ex: 911) and then tap
. 4. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End Call features. During this type of call, you will have access to the Speaker mode, Keypad, and End Call features. Note: This mode can drain your battery power more rapidly than a normal calling mode. Note: Selecting Location consent may drain battery power. For 5. At the Emergency Callback screen, follow the more information, refer to Power Saving Mode on page 255. on-screen instructions. 3. Tap to exit this calling mode. Call Functions and Contacts List 49 DRAFT Internal Use Only Add 2-sec pause to insert a two-second pause to enter a 2-second delay within a number string (the phone continues dialing after 2 seconds without any additional keys being pressed. Tip: You can create pauses longer than two seconds by entering multiple 2 second pauses.
Add wait to insert a hard pause within the number string (the phone waits for your input). A wait requires that any consecutive numbers be manually sent by tapping Yes.
Call settings to provide you access to the Call settings screen. Dialing Options When you enter numbers on the Keypad, you will see three on-screen options. From the keypad screen, use one of the following options:
Voicemail (
) to access your Voicemail service.
Call (
Delete (
) to call the entered number.
) to delete digits from the current number. To view additional dialing options:
After entering a number, tap
:
Send message to send the current caller a text message while still maintaining the current call active.
Add to contacts to add the current number to either a new or existing Contacts entry.
Speed dial setting to access the Speed dialing setting menu where you can assign a speed dial location to a current Contacts entry. 50 DRAFT Internal Use Only Answering a Call When somebody calls you, the phone rings and displays the incoming call image. The caller's phone number, picture, or name if stored in Contacts List, displays. Pressing the Volume down button mutes the ringer. If the incoming call is from a number stored in your Contacts, the entrys name is displayed. You may also see the callers phone number, if available. Touch and slide in any direction to answer the call Touch and drag upward to reject with a message Touch and slide in any direction to reject the call Managing Reject Calls This feature allows you to categorize both known and unknown callers as rejected contacts. These Contacts are then added to your Rejection list which can be managed for individual entries from within the Contacts list or as a whole from the Call rejection screen. 1. From the Home screen, tap 2. Press 3. Tap the Auto reject mode field to configure your and then tap Call settings
. Call rejection. automatic rejection settings. Rejected calls are routed automatically to your voicemail. Choose from:
Off: disables the auto rejection feature.
All numbers: enables the features for all known and unknown numbers, including those contacts that are not assigned to the rejection list.
Auto reject numbers: automatically rejects all entries assigned to the Reject list/Blacklist. Call Functions and Contacts List 51 DRAFT Internal Use Only International Calls 1. From the Home screen, tap and then touch and hold
until the device shows + on-screen. 2. Use the on-screen keypad to enter the country code, 3. area code, and phone number. If you make a mistake, tap single digit. or Touch and hold 4. Tap
. to delete all digits. once to delete a Adding numbers to the rejection list Entries can be added to the list via either the Contacts menu or via the Auto reject list menu. The Contacts menu option assigns all numbers for an individual as rejected. The Auto reject list allows to assign individual numbers. To assign multiple numbers as rejected via Contacts:
(Contacts). 1. From the Home screen, tap 2. Locate an entry and tap it to open the Contact Overview Screen (page 81). 3. Press and then tap Add to reject list. All phone numbers associated with this entry are then added to the reject list. To assign single number as rejected via Auto reject list:
1. From the main Call settings page, tap Call rejection Auto reject list. 2. Tap
(Create) and either enter the phone number or select a Contact from your Logs or Contacts list. 3. Tap Save to complete the assignment. 52 DRAFT Internal Use Only Pause Dialing You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or financial phone numbers.
2-Second Pause automatically sends the next set of numbers after a two-second pause. This is indicated in the number string as a comma (,). 1. From the Home screen, tap and use the on-screen keypad to enter the phone number. 2. Press and then tap Add 2-sec pause. This feature adds an automatic two-second pause. 3. Use the keypad to enter the additional numbers that will be dialed automatically after the second pause. Tip: You can create pauses longer than three seconds by entering multiple 2 second pauses. 4. Tap
. Wait Dialing Inserting a Wait into your dialing sequence means that the phone waits until it hears a dial tone before proceeding with the next sequence of numbers.
Wait sends the next set of numbers only after tapping Yes. This is indicated in the number string as a semicolon (;). Note: Do not add multiple Waits (;) to a number string as this will continue to prompt you after each sequence. 1. From the Home screen, tap and use the on-screen keypad to enter the phone number. 2. Press and then tap Add wait. This feature causes the phone to require your acceptance before sending the next set of entered digits. 3. Tap 4. Once prompted to Send the following tones?, tap Yes to
. dial the remaining digits. Call Functions and Contacts List 53 DRAFT Internal Use Only Redialing the Last Number The device stores the numbers of the calls youve dialed, received, or missed if the caller is identified. To recall any of these numbers:
Setting Up Speed Dial Entries Important! Speed dial location #1 is reserved for Voicemail. No other number can be assigned to this slot. 1. From the Home screen, tap
(Keypad tab). 2. Press and then tap Speed dial setting. The Speed dial setting screen displays a virtual list of locations with the numbers 2 through 100. 3. Tap an unassigned number slot. The Select contact screen displays. 4. Tap a contact and select a number to assign it to the speed dial location. The selected contact number/
image is displayed in the speed dial number box. 1. From the Home screen, tap 2. Tap the
.
(Logs tab) to display the list of recent calls. 3. Tap the name/number and tap
. Speed Dialing Once you have stored phone numbers from your Contacts List, you can set up to 99 speed dial entries (2-100) and then dial them easily whenever you want, simply by touching the associated numeric key. Note: Speed dial location #1 must be reserved for Voicemail use. 54 DRAFT Internal Use Only Changing a Speed Dial Entry Order Removing a Speed Dial Entry 1. From the Home screen, tap 2. Press and then tap Speed dial setting. Keypad tab. Important! The number 1 is reserved for Voicemail and another number cannot be assigned to this slot. 3. Press 4. Tap the current entry then tap the new target speed and then tap Change order. dial location. Note: Tapping 2 existing speed dial locations causes the entries to switch positions. 5. Tap Done. to store the change. 6. Press to return to the previous screen. 1. From the Home screen, tap 2. Press 3. Touch and hold a existing on-screen speed dial and then tap Speed dial setting. Keypad tab. location and select Remove from the context menu. or Press select
(to complete the deletion) or Cancel (to exit). and then tap Remove. Tap an entry and
(Remove entry). Select either Done 4. Press to return to the previous screen. Making a Call Using Speed Dial You can assign a short cut number to a phone number in the Contacts List for speed dialing. 1. From the Home screen, tap 2. Touch and hold a previously created speed dial location
(numbers 2-100, or 1 if you are dialing voice mail) until the number begins to dial. If you are not certain of the speed dial location, tap Speed dial setting and tap a speed 3. dial number to view the assigned phone number. Call Functions and Contacts List 55 DRAFT Internal Use Only Personalizing the Call Sound Setting During a call it may be necessary to adjust the sound of the incoming call by selecting an audio equalizer setting for the current call. 1. Tap 2. Confirm the option is enabled
(Personalize call sound). Note: If prompted to enable the feature via the Call settings menu, go to Call settings Personalize call sound. Select an available option. Choose from: Off, Soft Sound, Clear Sound, Adapt Sound left, and Adapt Sound right. In Call Options Your device provides a number of features that are available for use during a call. Personalized call sound Dialer Background Noise Reduction Adds a new call Activates or Deactivates speakerphone Call duration Places a call on hold Extra volume Ends the call Activates or Deactivates Bluetooth Headset Mutes or Unmutes the call Note: Noise reduction and Extra volume features are disabled while using Wi-Fi Calling. For more information, refer to Wi-Fi Calling on page 228. 56 DRAFT Internal Use Only Placing a Call on Hold You can place the current call on hold whenever you want. If your network supports this service, you can also make another call while a call is in progress. To place a call on hold:
1. Tap Hold to place the current call on hold. 2. Tap Unhold to activate the call that is on hold. To make a new call while a call is in progress:
More In-call Options During a call you can save the current callers information to the Contacts list, or create a Memo. Press and then select an available in-call option:
Contacts: During a call you can look up a number in the Contacts list. Browse the Contacts list for the information you need.
Memo: During a call it may be necessary to record information 1. Enter the new phone number that you wish to dial or
(a Note). look it up in Call history. 2. Once connected, tap Add call to dial the second call. 3. Dial the new phone number and tap
. To switch between the two calls:
Tap (
Swap Swap
) Swap. The previous In call number turns gray and displays On hold. The new active call displays a green background behind the number.
Message: During a call you can create a message.
(Compose). Tap Message Address and create the message. Review your message and tap
(Send). Call Functions and Contacts List 57 DRAFT Internal Use Only Multi-Party calls Making a Multi-Party Call A multi-party call is a network service that multiple people to participate in a multi-party or conference call. For further details about subscribing to this service, contact T-Mobile customer service. Setting up a Multi-Party Call 1. From the Home screen, tap 2. Dial the number for the first participant and tap
. 3. Once connected, tap Add call, enter the second phone
. The first caller is placed on number and tap hold. 4. Wait for the second caller to answer the incoming call Merge
(Merge). The two calls are now joined and tap into a multi-party call and display in the order in which they were called. Important! Multiple callers can be joined to a single multi-
party line. You can swap or place each multi-party call on hold. 58 Having a Private Conversation With One Participant Note: The Manage conference call option is not available for multi-party calls created while using the Wi-Fi Calling feature. You must be on the cellular network to use the manage feature. 1. Press 2. Tap and then tap Manage conference call.
(Split Caller) adjacent to the participants you would like to split from the current multi-line call. The list displays the callers in the order they were dialed. Note: The option is not available for multi-party calls created while using the Wi-Fi Calling feature. You must be on the cellular network to use the manage feature. 3. Tap the participant to which you want to speak privately. You can now talk privately to that person while the other participants can continue to converse with each other. If there is only one other participant, that person is placed on hold. DRAFT Internal Use Only 4. To return to the multi-party call, tap the Merge icon. All of the multi-party call participants can now hear each other. Dropping One Participant 1. Press and then tap Manage conference call to the right of the number to drop. End The participant is disconnected and you can continue the call with the other participant. 2. Tap to end your conversation with the remaining caller. Call Waiting You can answer an incoming call while you have a call in progress, if this service is supported by the network and you have previously set the Call waiting option to Activate. You are notified of an incoming call by a call waiting tone. For more information, refer to Configuring Additional Voice Call Settings on page 249. To answer a new call while you have a call in progress:
1. In a single motion, touch direction to answer the new incoming call. and slide it in any 2. Tap an option from the Accept call after menu:
Putting xxx on hold to place the previous caller on hold while you answer the new incoming call.
Ending call with xxx to end the previous call and answer the new call. Note: The new caller appears at the top of the list. The previous caller is placed on hold and appears at the bottom of the list. 3. Tap Swap to switch between the two calls. This places the new caller on hold and activates the previous call. Important! The currently active call is displayed with a green background. 4. Tap Swap again to switch back. Call Functions and Contacts List 59 DRAFT Internal Use Only Logs Tab The Logs tab is a list of the phone numbers (or Contacts entries) for calls you placed, accepted, or missed. The Logs tab makes redialing a number fast and easy. It is continually updated as your device automatically adds new numbers to the beginning of the list and removes the oldest entries from the bottom of the list. The Notification area of the Home screen (upper left) displays phone notifications, status, or alerts such as:
Displays when a call is in progress. Displays when a call was missed. Accessing the Logs Tab 1. From the Home screen, tap 2. Tap an entry to view available options.
(Logs tab). Note: The Logs tab only records calls that occur while the phone is turned on. If a call is received while it is turned off, it will not be included in your calling history. Each entry contains the phone number (if it is available) and Contacts entry name (if the number is in your Contacts). Indicates all outgoing calls made from your device. Indicates any received calls that were answered. Indicates a missed call. Indicates any received calls that were rejected. Indicates auto rejected calls. 60 DRAFT Internal Use Only Note: You can also view missed calls from within the Notifications area. Select entry to open the Logs screen. and tap the Missed call Call logs - Caller Overview
Tap a contact entry name or number to reveal the Call options screen:
Delete press
Send number press to delete the Contacts entry. to send the current Contacts entry information to an external recipient.
Add to reject list press to add the current phone number to an automatic rejection list. Similar to a block list, the selected caller will be blocked from making an incoming calls to your phone.
Create contact to save the number if it is not already in your
Touch and hold an entry to display the entry-specific context Contacts. menu:
View contact to view the Contact details for the current entry.
Update existing to update an existing Contacts entry with the current number.
Call allows you to redial the entry by name or number.
Send message allows you to create a new text message to the selected entry.
Time provides the time and date of the call and its duration.
View more to view additional log information from the current entry.
Copy to dialing screen press to pass the current number to your dialer and then edit the selected number before you place your next outbound call.
Copy to dialing screen to make alterations to the current phone number prior to redial.
Add to contacts to save the number if it is not already in your Contacts.
Send number to send the current Contacts entry information to an external recipient.
View contact to view the information for the currently stored Contacts entry.
Add to reject list to add the current phone number to an automatic rejection list. Similar to a block list, the selected caller will be blocked from making an incoming calls to your phone. Call Functions and Contacts List 61 DRAFT Internal Use Only Remove from reject list to remove the current phone number from the automatic rejection list.
Delete to delete the entry from the Logs list. Altering Numbers from the Logs List If you need to make a call from the Logs screen and you need to alter the number prior to dialing, you can add the appropriate prefix by prepending the number. Erasing the Call logs List You can delete either an individual call log entry or all current entries from the Logs list. To clear a single entry from the list:
1. From the Home screen, tap 2. Touch and hold an entry and select Delete Delete. Logs tab. To clear all entries from the list:
1. From the Home screen, tap 2. Press 3. Tap Select all. 4. Tap Delete Delete to continue with the erasure. and then tap Delete. Logs tab. or Tap Cancel to stop the current process. 1. From the Home screen, tap 2. Touch and hold an entry to access the entry-specific Logs tab. context menu. 3. Tap Copy to dialing screen. 4. Edit the number using the on-screen keypad or delete digits by pressing to erase the numbers. once the number has been changed. 5. Tap 62 DRAFT Internal Use Only Call Duration 1. From the Home screen, tap 2. Press 3. The following times are displayed for Voice and Data:
and then tap Call duration. Logs tab.
Last call: shows the length of time for the last call.
Dialed calls: shows the total length of time for all calls made.
Received calls: shows the total length of time for all calls received.
All calls: shows the total length of time for all calls made and received. You may reset these times to zero by pressing then tapping Reset. Call Functions and Contacts List 63 DRAFT Internal Use Only Section 4: Entering Text This section describes how to select the desired text input method when entering characters into your device. This section also describes the predictive text entry system that reduces the amount of key strokes associated with entering text. Your device comes equipped with an orientation detector that can tell if the phone is being held in an upright (Portrait) or sideways (Landscape) orientation. This is useful when entering text. Your device also provides several on-screen keypad text entry options to make the task of text entry that much easier. Text Input Methods There are three text input methods available:
Google voice typing: provides a voice to text interface.
Samsung keyboard (default): an on-screen QWERTY keyboard that can be used in both portrait and landscape orientation.
Swype: is enabled so as you can enter text as you swipe across the on-screen keyboard. Instead of tapping each key, use your finger to trace over each letter of a word. 64 The on-screen QWERTY keypad works the same in both portrait and landscape mode. Selecting the Text Input Method The Text Input Method can be assigned from within one of two locations:
Settings Menu:
From the Home screen, press and then tap Settings input Default and select an input method.
(My device tab) Language and My device My device Text Input field:
1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen to open the Notifications screen. 2. Tap
(Select input method) and select an available input method. DRAFT Internal Use Only Entering Text Using Swype Swype is the default text input method that allows you to enter a word by sliding your finger or stylus from letter to letter, lifting your finger between words. Swype uses error correcting algorithms and a language model to predict the next word. Swype also includes a touch predictive text system. The on-screen keyboard options are different between the Android keyboard and Swype on-screen input methods. Note: During its initial use, you may be prompted by a series of Swype Connect set up screens. Follow the initial on-screen set up instructions. Enabling and Configuring Swype If you configure another text input method (Samsung keyboard) you must re-enable Swype before using the Swype keyboard. For more detailed information on configuring Swype settings, see Swype Settings on page 262. When Swype is enabled there can also be normal keyboard functionality. 1. From the main Settings page, tap My device tab Language and input. 2. Tap Default Swype. Swype Text Entry Tips You can access the SwypeTips application and watch a video or tutorial on using Swype. You can also use the following Swype text entry tips.
Create a squiggle (like an S shape) to create a double letter (such as pp in apple).
Touch and hold a key to view the punctuation menu then make a selection.
Move your finger or stylus over the apostrophe to enter contractions.
Double-touch on the word you want to change to correct a misspelled word, then touch the delete key to erase one character. Touch and hold the delete key to erase an entire word. Entering Text 65 DRAFT Internal Use Only Selecting a Text Input Mode in Swype 1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. 2. With Swype as your text entry method, select one of the following text mode options:
ABC Edit ABC to use Swype with alphanumeric characters from the on-screen keyboard.
SYM (Symbol) 123
+!=
on-screen keyboard. to enter numbers and symbols from the Note: After typing an initial uppercase character, the key and all letters that follow are in lower changes to case. 66 Swype Keyboard Overview
Recipients: a field where you can enter the recipients of the current message. You can choose from Groups, Favorites, Contacts, or Logs.
Text Input field: a field where text, number, or other characters can be entered.
CAPS/ALT key: When in 123ABC mode, this key changes the capitalization of the subsequent entered characters. When in SYM mode, this key can show additional symbol characters.
SWYPE settings: Touch and hold this button to access the Swype settings screen.
Text Input mode: There are two available modes: 123ABC and SYM. 123ABC mode contains alphanumeric characters and a few common punctuation marks. Text mode button indicates SYM. SYM mode contains only symbols and numbers. Text mode button indicates 123ABC. DRAFT Internal Use Only Recipients Text input field Suggestions CAPS/ALT key SWYPE Settings Text Input mode Current Mode Delete Using 123ABC Mode in SWYPE In 123ABC mode, you can enter only letters and a few common punctuation marks from the on-screen keyboard. The text mode key shows
. 123
+!=
1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. 2. Tap Edit ABC to configure the keyboard for 123ABC mode
(showing letters and numbers on the on-screen keys). Once in this mode, the text input type shows
. 123
+!=
Note: After typing an initial uppercase character, the key and all letters that follow are in lower changes to case. 3. Swipe your finger continuously over the letters to form a word. After entering a word using Swype, tap Delete to erase the word. If you make a mistake, tap to erase a single character. Touch and hold to erase an entire word.
(Send) to deliver the message. 4. Tap Entering Text 67 DRAFT Internal Use Only Entering Numbers and Symbols in SWYPE By using the on-screen keyboard in portrait mode, some symbols are not available (such as Emoticons or Smileys). In SYM mode using Swype, you can only enter symbols and numbers from the on-screen keyboard. Once in SYM mode, the text mode key shows
. Edit ABC 1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. 2. Tap 123
+!=
to configure the keyboard for SYM mode. Once in this mode, the text input type shows Edit ABC 3. Tap the on-screen key for the number or symbol you want to enter. to select from additional symbols. 2 4. Tap 1 For example:
To enter : tap 123
+!=
2 1 and select the key. All lowercase Displays when the next character is entered in lowercase. Pressing this while in 123SYM mode, reveals additional numeric-symbols keys. Initial Uppercase Displays when the first character of each word is entered as uppercase but all subsequent characters are lowercase. All Uppercase Displays when all characters will be entered as uppercase characters. By default, the first letter of an entry is capitalized and the following letters are lower case. After a word is entered and you lift your finger, the cursor automatically adds a space after the word. Note: If multiple word choices exist for your Swype entry, an on-screen popup appears to provide additional word choices. 68 DRAFT Internal Use Only Using the Samsung Keyboard This QWERTY keyboard can be used to enter text in either a Portrait or landscape orientation. The only difference between the two orientations are the sizes of the keys. From a screen where you enter text, rotate your phone counterclockwise to a landscape orientation. The on-screen QWERTY keyboard displays. The Samsung Keyboard This device has a built-in, QWERTY keypad (portrait mode) or keyboard (landscape mode). Using the QWERTY keypad/
keyboard, you can type letter, numbers, punctuation, and other characters. To use the Samsung keyboard you must first configure the settings to default to the Samsung keyboard. 1. From the Home screen, press and then tap My device My device
(My device tab) Language and Settings input Default Samsung keyboard. or From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen, then select method) Samsung keyboard.
(Select input 2. The virtual keyboard is then assigned to the Samsung keyboard configuration for all subsequent text input. Shift key Text input field Input Mode Indicator Current Mode Send Delete Input Options
/Settings For more detailed information on configuring Samsung Keyboard settings, see Samsung Keyboard Settings on page 259. Entering Text 69 DRAFT Internal Use Only Settings menu. to access the Samsung keyboard settings Changing the Text Input Mode in Keyboard 1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. 2. With Samsung keyboard as your text entry method, select one of the following text mode options:
Abc ABCABC keyboard. In this mode, the text mode button displays
: to use alphabetic characters from the on-screen
. 123 123 Sym Sym
: to enter numbers by pressing the
Symbol/Numeric 123 123 Sym Sym numbers selecting them on the on-screen keyboard. In this mode, the text mode button displays There are up to 2 available pages of numeric symbols available by tapping ABCABC 1/31/3
. Entering Text using Different Input Options Although the default text input method with the Samsung keyboard is to use the on-screen keys you have other options. Note: To access settings, touch and hold the Input Methods button
, then tap the available options.
(Settings) then select it from 1. From within an active message, tap the text input field to reveal the on-screen keyboard. 2. Tap
(Input Methods) to use the default Voice to select from other input typing input method to convert your spoken words to on-screen text. or Touch and hold methods such as:
Voice to text functionality.
Clipboard to launch the devices clipboard area from where you can select a current clipboard item to place in your current message. to launch the voice recognition 70 DRAFT Internal Use Only Note: After typing an initial uppercase character, tap to toggle capitalization. All lowercase Displays when the next character is entered in lowercase. Initial Uppercase Displays when the first character of each word is entered as uppercase but all subsequent characters are lowercase. All Uppercase Displays when all characters will be entered as uppercase characters. By default, the first letter of a new entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space. Using ABC Mode in Samsung Keyboard 1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. 2. Tap ABCABC to configure the keyboard for ABC mode. Once in this mode, the text input type shows 123 123 Sym Sym Note: After typing an initial uppercase character, the key and all letters that follow are in lower changes to case. 3. Enter your text using the on-screen keyboard. If you make a mistake, tap to erase a single character. Touch and hold to erase an entire word.
(Send) to deliver the message. 4. Tap Entering Text 71 DRAFT Internal Use Only Using Symbol/Numeric Mode Use the Symbol/Numeric Mode to add numbers, symbols, or emoticons. While in this mode, the text mode key displays ABCABC
. 1. From a screen where you can enter text, tap the text input field to reveal the on-screen keyboard. Rotate the phone counterclockwise to a landscape orientation, if desired. 2. Tap 123 123 Sym Sym to configure the keyboard for Symbol mode. Once in this mode, the text input type shows ABCABC
. 3. Tap a number, symbol, or emoticon character. 4. Tap to return to ABC mode. ABCABC To enter symbols:
123 123 Sym Sym 1. Tap to configure the keyboard for Symbol mode. 2. Tap the appropriate symbol key. or Tap button to cycle through additional pages.
The first number on this key indicates which page (1 or 2) of 1/31/3 additional characters is active. 72 Using the Google Voice Typing This feature uses Google voice recognition to convert your spoken words into on-screen text. You can use your voice to enter text using the Google Voice typing feature. 1. From the keyboard, touch the top of the screen and drag it down to display your notification panel. 2. Tap 3. At the Listening prompt
(Select input method) Google voice typing.
(Speak now), speak clearly and distinctly into the microphone. The text is displayed in the message as you are speaking. For more detailed information on configuring Google Voice Typing settings, see Configure Google Voice Typing on page 259. 4. Tap
(Done) when you are finished. or Tap
(Resume) to resume recognition. Note: The feature works best when you break your message down into smaller segments. DRAFT Internal Use Only Using Google Voice Typing 1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the
(Select input bottom of the screen, then select method) Google voice typing. The virtual keyboard is then removed and all subsequent input to done via the microphone as text to speech. 2. Speak into the devices microphone and watch your text being entered on-screen. If the text is incorrect, tap DELETE. 3. Entering Text 73 DRAFT Internal Use Only Section 5: Contacts This section explains how to use and manage your Contacts List. You can save phone numbers to your phones memory. Accounts From the Accounts menu you decide if you want applications to synchronize, send, and receive data at any given time, or if you want the applications to synchronize automatically. After determining how you want the accounts to synchronize, indicate which account to synchronize with your Contacts list. Contacts List Search Contacts field 1. Sign in to your Google account. 2. From the Home screen, press and then tap Contacts Settings to the My accounts area.
(Accounts tab) and then navigate Note: The Accounts area lists those accounts that have been added to the device and provides an Add account button to quickly and easily add new ones. 74 Tabs Create Contacts Tabbed Navigation DRAFT Internal Use Only Creating a Contact The default storage location for saving phone numbers to your Contacts List is your devices built-in memory. If existing Google and Corporate email accounts have been synchronized to your phone, these will be made available to your device during the creation of new entries. These new Contacts entries can be assigned or saved to synced accounts such as Phone, SIM, Google, or Corporate. Your device automatically sorts the Contacts entries alphabetically. You can create either a Device, SIM, Samsung account, Google, or Microsoft Exchange ActiveSync contact. Important! The Google and Microsoft Exchange ActiveSync account types are only visible after creating an email account of those types on your phone.
Device contacts are stored locally on the device. Note: If the phone is ever reset to its factory default parameters, contacts stored on the phone can be lost.
SIM contacts are stored within the micro SIM Card. Note: SIM contacts only store the Name and Phone number for an entry.
Samsung account contacts are shared with your existing Samsung account.
Google contacts are shared with your existing Google account and can also be imported to your phone after you have created a Google Mail account.
Microsoft Exchange ActiveSync (also known as Work or Outlook) contacts are those contacts that are intended to be shared with either an Exchange Server or from within Microsoft Outlook.
Add new account lets you create a new account type. Choose from Samsung account, Google, or Microsoft Exchange ActiveSync. Note: When storing an entry into your micro SIM card, note that only the Name, and Number are saved. To save additional information for a particular contact, such as notes, email, dates, etc., it is important to save that Contact into your phones onboard memory. Contacts 75 DRAFT Internal Use Only Note: The label entries below can change and are dependant on the selected destination type (ex: the Other and Custom might not appear with an Exchange ActiveSync account destination type). 6. Tap the label button (to the left of the Phone field) and scroll through the list to select a category such as Mobile, Home, Work, Work Fax, Home Fax, Pager, Other, Callback, or Custom. 7. Tap a phone number field and enter a phone number. on the QWERTY keyboard to remove a previously
Tap entered phone number.
Tap
Tap to enter an additional phone number to remove a previously entered phone number. To create a New Contact:
1. From the Home screen, tap 2. Tap to create a contact.
(Contacts). Note: You can also add a new contact by entering a number from the keypad and pressing Add to Contacts Create contact. Continue with step 3. and then tap 3. Tap a destination type (Device, SIM, Samsung account, Google, or Microsoft Exchange ActiveSync) (depending on where you want to save the new contact information). 4. Tap the Name field and enter a name for this contact using the displayed keypad.
Tap to access additional name entries such as: Name prefix, First name, Middle name, Last name, and Name suffix. 5. Tap the image icon and select a photo for this contact. Selections are: Image, Pictures by people, or Take picture. 76 DRAFT Internal Use Only 8. Enter additional information such as: Email, Groups, Ringtone, Message alert, Vibration pattern or tap Add another field to input additional category information.
Add another field contains the following options: Phonetic name, Organization, IM, Address, Notes, Nickname, Website, Internet call, Events, or Relationship.
Use your finger to slide the page up or down to see additional fields and categories. 9. Tap Save to complete and store the new entry. or Tap Cancel to delete the current entry. To save a Number from your Keypad:
1. From the Home screen, tap
(Keypad tab).
(Phone) 2. Enter a phone number. 3. Tap Add to Contacts Create contact. or Tap Add to Contacts Contact. Update existing, and select a 4. Enter additional contact information. For more information, refer to Creating a Contact on page 75. Finding a Contact You can store phone numbers and their corresponding names onto either your SIM card, your phones built-in memory, or an external location (such as Google, Exchange, etc..). They are all physically separate but are used as a single entity, called Contacts. Depending on the storage size of the particular SIM card, the maximum number of phone numbers the card can store may differ. 1. From the Home screen, tap 2. Swipe up or down until you see the contact displayed.
(Contacts). or Tap the Search field and begin entering the entrys name. Matching entries are then displayed. This process filters through all of your current account Contact entries to only show you the matching entries. or In a single motion, touch and hold the letter tab area
(on the right) until on-screen letters appear, then scroll through the list. You are then taken to that section of the Contacts list. Touch the contact entry. Contacts 77 DRAFT Internal Use Only Editing Contact Information 1. From the Home screen, tap 2. Tap a contact name from the list and tap
.
(Edit). or Select a contact name and press Edit. and then tap or Touch and hold a Contacts entry from the main Contacts list and then tap Edit. 3. Edit the contact information then:
Tap Save to complete and store the new entry or
Tap Cancel to delete the current entry. Adding a Number to an Existing Contact
. 1. From the Home screen, tap 2. Touch and hold an entry and select Edit to reveal the Contact entrys details screen. 3. Tap a phone number field and enter a phone number.
Tap on the QWERTY keyboard to remove a previously entered phone number. to enter an
Tap additional phone number Contact Details Screen
Tap to remove a previously entered phone number. 78 DRAFT Internal Use Only 4. Enter additional information such as: Email, Groups, Ringtone, Message alert, Vibration pattern or tap Add another field to input additional category information.
Add another field contains the following options: Phonetic name, Organization, IM, Address, Notes, Nickname, Website, Internet call, Events, or Relationship.
Use your finger to slide the page up or down to see additional fields and categories. Sending Contacts via Bluetooth Depending on your paired devices settings and capabilities, you may be able to send pictures, Contact information, or other items using a Bluetooth connection. Note: Prior to using this feature, Bluetooth must first be enabled on both your phone and the external device, and the recipients device must be visible. 5. Tap Save to complete and store the new entry. 1. Verify your Bluetooth is active and your phone is or Tap Cancel to delete the current entry. For more information on adding a Pause or Wait, see page 53 and page 53. Deleting Contacts Important! Once Contacts list entries are deleted, they cannot be recovered. 1. From the Home screen, tap 2. Touch and hold a contact name from the list and select
. Delete OK. visible. 2. From the Home screen, tap 3. Touch and hold the entry from the list to display the
(Contacts). on-screen context menu. 4. Tap Share namecard via Bluetooth and select a paired external Bluetooth device. Note: The external Bluetooth device must be visible and communicating for the pairing to be successful. 5. A Bluetooth share notification displays in your notifications list. Contacts 79 DRAFT Internal Use Only Contact List Options 1. From the Home screen, tap 2. Press
. The following options display:
Delete: allows you to delete 1 or more of your contacts.
Import/Export: imports or exports contacts to or from the USB storage location, SIM card or SD card.
Share namecard via: allows you can to send namecards via methods such as Bluetooth, Email, Gmail, Messaging, or Wi-Fi Direct.
Merge accounts: allows you to merge all of your current Contact entries with either your active Google or Samsung account. If several of your contacts are from other external sources, this allows you to back them up or copy them to your Samsung account. Tap OK to continue or Cancel to exit.
Accounts: allows you to add and manage mobile accounts on Samsung account, Dropbox, Google, LDAP, or Microsoft Exchange ActiveSync. This option also allows you to manually synchronize all of your current contacts with their respective accounts.
Speed dial setting: allows you to set up speed-dialing. 80
Send message/email: allows you to send a text /picture message or an email using your Google account.
Contacts to display: allows you to choose to display All contacts, those on your Device, SIM card, Samsung account, Gmail, or only display contacts that are part of a Customized list.
Settings: allows you to configure where you save new contacts to, or view your service numbers, or send contact information. Options include: Only contacts with phones, List by, Display contacts by, Service numbers, and Contact sharing settings.
Help: provides an on-screen Help file that covers most high level topics for Contacts. Contact Menu Options 1. From the Home screen, tap 2. Touch and hold an entry to reveal the context menu. The following options display:
Edit: allows you to edit the currently selected Contacts entry.
Delete: allows you to delete the currently selected Contacts entry. DRAFT Internal Use Only Link contact: allows you to link the current contact to another current contact. Similar to a see also feature. If you cant remember a contacts information, linking entries can help you find the person you are looking for.
Share contact via message: allows you to send the current entry info via text message.
Add to favorites: allows you to copy the current Contacts entry to the list within the Favorites tab.
Share namecard via: allows you to send the current Contact entrys information to an external recipient via either Bluetooth, Email (Exchange or Internet), Gmail, Messaging, or Wi-Fi Direct.
Add shortcut to home: adds a shortcut to the current Contacts entry to an available screen location. Contact Entry Options 1. From the Home screen,
Remove from favorites: allows you to remove the current tap
. Contacts entry from the Favorites tab.
Add to group: allows you to add the current Contacts entry to an existing group.
Add to reject list/ Remove from reject list: allows you to add or remove the current Contacts entry to a list of automatically rejected incoming phone numbers. Note: If an entry does not have a phone number, the reject list option will not appear. 2. Tap an entry to reveal the Contact entrys Overview Screen. This screen contains Name, contact numbers, email, and linked contact information. 3. Press to reveal the context menu specific to this entry. 4. Tap an available option. Contact Overview Screen Contacts 81 DRAFT Internal Use Only Linking Contact Information Most people now maintain multiple email accounts, social networking logins, and other similar account information. For example, a Facebook account login name might differ from a corporate email account login because they are maintained separately and for different groups of people. This device can synchronize with multiple accounts. When you synchronize your phone with those accounts, each account creates a separate contact entry in the Contacts list. If one of your contacts (Amy Smith) has a regular email account that you maintain in Gmail, but also has a Facebook account under her maiden and married name, as well as a Video! chat account, when you merge those accounts into your Contacts list you can join all of her entries and view the information in one record. Linking contact information makes sending messages easy. You can select any account email address or information all from one screen, versus searching multiple, individual screens to locate the desired account information. Next time you synchronize your device with your accounts, any updates contacts make to email account names, email addresses, etc. automatically update in your contacts list. 1. From the Home screen, tap 2. Tap a contact name (the name you want to link to
. another entry) to reveal the Contact entrys Overview Screen. Note: Typically this is the same contact with a different name or account information. and then tap Link contact. 3. Press 4. Tap the second contact entry (the entry in which to link). The second contact is now linked with the first and the account information is merged into one screen. Note: The information is still maintained in both entries, but displays in one record for easier viewing when you link the contacts. 82 DRAFT Internal Use Only Important! It is the first contact image that is displayed for both, and the first contacts name that is used. For example: If Amy (original entry) is joined with Julie (second entry). Julie seems to disappear and only Amy remains. Tap the Amy entry (showing the Amy image) to view both. Unlinking a Contact 1. From the Home screen, tap 2. Tap a contact name (the account name from which you
. want to unlink an entry). This reveals the details for entry. Note: Typically this is the same contact with a different name 5. Tap the main linked contact to view the contact or account information. information you linked. The contacts and information displays with an icon next to the contact name to indicate what type of account information is contained in the entry. 3. Tap within the Connection area. or Press and then tap Separate contact. 4. Tap next to the entry you want to unlink and select OK. The contacts are unlinked or separated and no longer display in the merged record screen. Both contacts now go back to being separately displayed. Contacts 83 DRAFT Internal Use Only Marking a Contact as Default When you use applications such as the Voice Dialer or other messaging type applications, the application needs to know which information is primary (default) in a contact entry list. For example, when you say Call John Smith, if you have three phone records for John Smith, the Voice dialer is looking for the default number or entry. The Mark as default option marks one entry in a contact record to use as the default. This comes in handy when you have multiple entries for the same person. 1. From the Home screen, tap 2. Tap a Contact entry. 3. Press
. and then tap Mark as default. The Mark as default screen displays radio buttons next to the contact name, phone number, or other contact information. 4. Tap the radio button next to the entry information you want to be the primary information (such as name, phone number, or email) and select Done. 84 Note: If there are multiple phone numbers assigned to an entry, assigning one as the default will automatically dial that number when the contact is selected for dialing. Sending a Namecard A Namecard contains contact information, and can be sent to recipients as a Virtual Business Card (V-card) attachment using Bluetooth, Google Mail, or as a message. 1. From the Home screen, tap 2. Tap a Contact entry. 3. Press
. and then tap Share namecard via and select a delivery method: Bluetooth, Email (Exchange or Internet), Gmail, Messaging, or Wi-Fi Direct. The Namecard attaches to the selected message type and is delivered when you send the message. Note: Email appears as an option only after an Internet or Exchange email account has been created. DRAFT Internal Use Only Sending All Current Namecards Rather than selecting once Contact entry at a time, you can send all of your current entries at once. 1. From the Home screen, tap 2. Press 3. Tap Select all to place a check mark alongside all and then tap Share namecard via. currently displayed Contact entries. 4. Tap Done and select a delivery method:
Bluetooth to transmit the contacts to another Bluetooth-
compatible device.
Email to attach the contact cards to a new outgoing email
(Exchange or Internet).
Gmail to attach the contact cards to a new outgoing Internet-based email.
Messaging to attach the contact cards to a new outgoing text message.
Wi-Fi Direct to transmit the entries to another Wi-Fi Direct enabled device. Sending a namecard using Bluetooth You must create a Contact prior to sending a namecard to a recipient. For more information, refer to Creating a Contact on page 75. 1. From the Home screen, tap 2. Touch and hold the entry to reveal the on-screen
. context menu. 3. Tap Share namecard via Bluetooth. Important! You must activate Bluetooth to use this feature. 4. Tap the Bluetooth device in which to send this name card. Bluetooth forwards the namecard to the recipient. Contacts 85 DRAFT Internal Use Only Copying Contact Information to the microSD Card This procedure allows you to copy entry information saved on the phones memory, onto the microSD card. 1. From the Home screen, tap 2. From the Contacts List, press
. Import/Export Export to SD card. and then tap 3. Tap OK to choose all current phone contact entries. Copying Contact Information Copying Contact Information to the SIM Card The default storage location for saving phone numbers to your Contacts list is your devices built-in memory. This procedure allows you to copy numbers saved to the phones memory, onto the SIM card. 1. From the Home screen, tap 2. From the Contacts List, press
. and then tap Import/Export Export to SIM card. 3. Tap Select all to choose all current phone contact entries. or Select a specific entry by touching an entry. A check mark indicates a selection. 4. Tap Done. The name and phone number for the selected contact is then copied to the SIM. 86 DRAFT Internal Use Only 4. To synchronize only Contacts, toggle the active state of the Sync Contacts field. A green check mark indicates the feature is enabled. Note: The process of updating your Contacts tab can take several minutes. If after 10-20 minutes, your list has not been updated, repeat step 2-3. 5. Your Contacts tab then reflects any updated Contact information. Note: Syncing of contacts requires you are logged into your Gmail and Corporate accounts via the device. Synchronizing Contacts Syncing data from your managed accounts allows you to add and manage a new or existing contact from your online or remote accounts to your phone. Prior to syncing, you must first have an active Google or Microsoft Exchange account with current Contact entries, and be signed into your account via the phone. With syncing, any Contacts entries (with phone numbers, email addresses, pictures, etc.) are updated and synced with your device. 1. From the Home screen, press and then tap Settings to the My accounts area.
(Accounts tab) and then navigate 2. Select the email account containing the contacts you wish to synchronize. 3. Tap within the adjacent account field to reveal the accounts synchronization settings screen.
If appears within the adjacent account field, this indicates a sync error. Contacts 87 DRAFT Internal Use Only Display Options The Display options menu allows you to allows you to choose which contacts to display. You can also choose to display only contacts that have phone numbers. Note: Once a display filter has been selected, only those Contact entries are shown until the All contacts option is re-selected. 1. From the Home screen, tap 2. Press
. and then tap Contacts to display. Select any of the following to filter according to the selection:
All contacts allows you to display all available Contacts.
Device lists those Contacts currently found only on your Phone.
SIM lists those Contacts currently found only on your SIM card.
Samsung account lists those Contacts currently found and syncd within the Samsung account.
Google lists those Contacts currently found within the Google account.
Microsoft Exchange ActiveSync lists those Contacts currently found within the Exchange account. 88
Customized list allows you to enable which account categories are displayed. For example, on Google contacts, you can filter which Contact categories are shown (Friends, Family, etc..) Adding more Contacts via Accounts and Sync When you synchronize applications such as Facebook, Twitter, MySpace, a corporate email account, or Google, using the Accounts and sync option synchronizes the data from the selected account type with your Contacts list. and then tap 1. From the Home screen, press Settings to the My accounts area.
(Accounts tab) and then navigate 2. Tap Add account. 3. Determine which type of account information you want to synchronize with your Contact list. Selections are:
Samsung account, Dropbox, Email, Google, LDAP, Microsoft Exchange ActiveSync, or Sync apps with Facebook. 4. Tap an account type to add. DRAFT Internal Use Only 5. Follow the prompts. The selected account type 6. Compose the email and tap Send. synchronizes with your Contacts list. 6. After synchronizing accounts you may want to link contact information. For more information, refer to Linking Contact Information on page 82. Additional Contact Options Sending an Email to a Contact Note: Contacts must contain and email account and address before you can use the Send email feature. 1. From the Home screen, tap 2. Press and then tap Send message/email Send email. Contacts that contain an email address display. 3. Tap the contact(s) to which you want to send an email. A check mark displays next to the selection. Note: The select contact must have an email as part of their details screen. 4. Tap Done. 5. Select an email account type. Export/Import For more information, refer to Copying Contact Information on page 86. Contact List Settings From this menu you can determine the default storage location for Contacts, display your phones primary number, and view service numbers listed in your Contact list. 1. From the Home screen, tap 2. Press
. and then tap Settings. Configure any of the following options:
Only contacts with phones allows you to display only those contacts containing phone numbers.
List by defines how the current list of Contacts are sorted:
First name or Last name.
Display contacts by defines how the current list of Contacts are listed: First name first (ex: Steve Smith) or Last name first
(Smith, Steve).
Service numbers lists the currently available service numbers. Contacts 89 DRAFT Internal Use Only Contact sharing settings allows you configure how your Contacts entries are sent: individually or as a single file containing all available entries. Tap Settings to select a share setting. Send all namecards allows you to set your Contact sharing option to all so that your entire Contacts entries are sent as a group and not as multiple single files. If all your entries are selected only a single file is sent. Note: Your destination device must support this feature or no entries will be received by the external device. Send individual namecards allows you to set your default to send individual contacts one at a time. Even if you select all your entries, each is sent individually. 90 Groups This feature allows you to add a new or existing contact to a call group. This group can be one of the already present groups (Family, Friends, or Work) or a user-created group. Creating a New Caller Group 1. From the Home screen, tap
(Groups tab). 2. Press 3. Tap the Group name field and use the on-screen and then tap Create. keypad to enter a new group name. For more information, refer to Text Input Methods on page 64. 4. Tap Group ringtone and select a ringtone for the group. Selections are: Default ringtone, Ringtones (select from available ringtones) or Add (to navigate your device and select an existing audio file). 5. Tap Message alert and select a message alert ringtone to be associated with this group. 6. Tap Vibration pattern and select a unique vibration pattern either from an available list or Create your own. This pattern is then associated with this group. 7. Tap Add member to add Contacts to the new group. DRAFT Internal Use Only 8. From the available list of contacts, tap the contact(s) you want to add. A check mark displays next to contact entry. Then tap Done. or Tap Select all to place a check mark alongside all current entries. Then tap Done. 9. Tap Save to store the newly created group. Note: Some externally maintained group types (such as Google) can only be managed or updated remotely online vs via the device. These external types will not allow editing or deleting members locally via the phone. Adding an Existing Entry to a Current Caller Group 1. From the Home screen, tap 2. Tap a group entry 3. From the available list of contacts, tap the contact(s)
(Add group member). Removing an Entry From a Caller Group
. 1. From the Home screen, tap 2. Tap a group entry. 3. Press 4. Tap all of the contacts you want to remove from this group. A check mark displays next to contact entry. 5. Tap Done.The contacts are removed from the group. and then tap Remove member. Editing a Caller Group To edit a Group entry, there must be at least one member as part of the selected group. 1. From the Home screen, tap 2. Touch and hold a group entry then select Edit group. 3. Make modifications to the Group name, Group ringtone, Message alert, Vibration pattern fields, or Add member. 4. Tap Save. you want to add. A check mark displays next to contact entry. 4. Tap Done. The selected contacts are added to the group. Contacts 91 DRAFT Internal Use Only The Favorites Tab The Favorites tab is a list of the phone numbers that have been designated as favorite contacts. For more information, refer to Logs Tab on page 60. 1. From the Home screen, tap
(Favorites tab). 2. Tap
. Adding a contact to your favorites list:
1. From within the Favorites tab, press and select Add to favorites. 2. Place a check mark alongside those current Contacts entries you wish to assign as favorites. 3. Tap Done to complete the process. Deleting a Caller Group
. and then tap Delete groups. 1. From the Home screen, tap 2. Press 3. Select either Select all or tap the desired group. 4. Tap Delete. 5. Select either the Group only or Group and group members. 6. Tap OK. Sending a Message to a Group 1. From the Home screen, tap 2. Tap an existing group, and press
. and then tap Send message. or Touch and hold a group entry and select Send message. 3. Select the recipients of the new message (indicated by a green check mark). If an entry contains multiple phone numbers, each must be selected individually. 4. Tap Done. 5. Type your message, and tap
(Send). 92 DRAFT Internal Use Only Section 6: Messaging This section describes how to send or receive different types of messages. It also explains the features and functionality associated with messaging. Types of Messages Your phone provides the following message types:
Text Messages
Multimedia (Picture, Video, and Audio) Messages
Email and Gmail Messages
Google Hangouts
Messenger The Short Message Service (SMS) lets you send and receive text messages to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service providers message service. The Multimedia Messaging Service (MMS) lets you send and receive multimedia messages (such as picture, video, and audio messages) to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service providers multimedia message service. Important! During the creation of a text message, adding an image, sound file, or video clip automatically changes it from a text message (SMS) to a multimedia message (MMS). Creating and Sending Messages
(Messaging) 1. From the Home screen, tap
(Compose). 2. Tap the Enter recipient field to manually enter a to select from one of the following:
recipient. or Tap
Groups: to select a recipient from the Group list.
Favorites: to select a recipient from the Favorites list.
Contacts: to select a recipient from your Contacts list (valid entries must have a wireless phone number or email address).
Logs: to select a recipient from a list of recently sent messages. Messaging 93 DRAFT Internal Use Only 3. If adding a recipient from either Groups, Favorites, Contacts, or Logs, tap the contact to place a check mark then tap Done. The contact displays in the recipient field. Note: Delete any unnecessary members by tapping their name/number in the recipient area and selecting Delete. 4. Add more recipients by tapping either the Enter and selecting recipients. recipient field or 5. Tap the Enter message field and use the on-screen keypad to enter a message. For more information, refer to Text Input Methods on page 64. 6. To add an attachment to your message, tap
(Attach) and select one of the following options:
Image: allows you to tap an existing image from your Pictures list to add it to your message.
Take a picture: allows you to temporarily exit the message, take a photo with phones camera, and then add it to your message by tapping Save.
Video: allows you to choose an existing video from the Videos list, then add it to your message. 94
Record video: allows you to temporarily exit the message, record a video clip using the phones camera, and then add it to your message by tapping Save.
Audio: allows you to choose an existing audio file from the Audio list, then add it to your message by tapping the circle to the right of the audio so that it turns green, then tapping Done.
Record audio: allows you to temporarily exit the message and record an audio clip using the phones microphone. It is then automatically attached to the message.
Memo: allows you to add an S Memo that you have created.
Calendar: allows you to add an event from your calendar.
Location: allows you to attach a thumbnail of a map showing your location.
Contacts: allows you to tap on an existing Address Book entry, then add it to your message by tapping Done. 7. Review your message and tap 8. If you have more than one recipient, the same text message is sent to all recipients in the Enter Recipients field.
(Send). DRAFT Internal Use Only Note: If you exit a message before you send it, it will be automatically saved as a draft. Quick Messaging a Number from the Contacts List 1. From the Home screen, tap 2. Locate an entry from the Contacts list. 3.
(Contacts). In a single motion, touch and drag your finger over the number by going to the left. This action addresses a new text message to the selected recipient. Message Options Options before composing a message
(Messaging). 1. From the Home screen, tap 2. Before composing a message, from the main Message from the main Messaging screen to screen press display additional messaging options:
Search: allows you to search through all of your messages for a certain word or string of words. Use the on-screen keypad to enter a word or phrase in which to search, then tap
. For more information, refer to Message Search on page 101.
Delete threads: allows you to delete any message thread. Select the messages to delete and a green check mark will appear next to the message. Tap Delete. For more information, refer to Deleting message threads on page 100.
Draft messages: displays the draft messages folder and its contents.
Locked messages: displays the locked messages folder and its contents.
Scheduled messages: displays the scheduled messages folder and its contents.
Spam messages: displays the spam messages folder and its contents.
Text templates: displays your available text message reply templates. For more information, refer to Text Templates on page 106.
Settings: allows you to access Messaging settings. For more information, refer to Messaging Settings on page 101. Messaging 95 DRAFT Internal Use Only 3. From the Messaging screen list, touch and hold an on-screen message and select an option:
Add to Contacts: allows you to add the sender to either a new or existing Contacts entry.
View contact: allows you to view the current entry information for the sender.
Delete thread: deletes the entire message and its bubbles. Deleting message threads. For more information, refer to Deleting message threads on page 100.
Add to spam numbers: allows you to tag a number as spam so that these messages can be directly delivered to your spam folder. 96 Options while in a current message 1. From the Home screen, tap 2. From within an open message, press
(Messaging). to display additional messaging options:
Delete message: allows you to delete either the current message or selected bubbles.
Insert smiley: allows you to add insert smiley icons images (emoticons).
Add text: allows you to add text items from sources such as: Memo, Calendar, Location, Contacts, and Text templates.
Preview (only in MMS): allows you to add preview the MMS message prior to delivery.
Add to contacts: allows you to add the sender to either a new or existing Contacts entry.
View contact: reveals the current Contacts overview screen.
Add slide: converts an SMS message into an MMS
(Multimedia) message and allows you to attach an existing slideshow.
Remove slide: allows you to remove a previously attached slideshow. DRAFT Internal Use Only Translate: launches a Translate popup menu. Here you can both assign the senders original language and assign a target language for the recipient (they will receive your message in the designated language). Enable the translate feature then configure the available options as desired. Tap OK to store the new settings.
Add subject: allows you to enter a subject.
Duration (5 secs) (only in MMS): allows you to change the duration of the image slideshow.
Layout (bottom) (only in MMS): allows you to change the layout.
Add recipients: allows you to enter additional recipients to the message.
Scheduling: allows you to schedule a time for the current message to be delivered.
Add to spam numbers: allows you to tag a number as spam so that these messages can be directly delivered to your spam folder.
Discard: closes the current open message. Note: You must be logged into your Samsung account prior to using the S Translator feature. Messaging 97 DRAFT Internal Use Only Viewing Newly Received Messages When you receive a message, your phone notifies you by displaying your Home screen. To read a message:
within the Notification area at the top left of 1. From the Home screen, tap then tap the new message to view its contents. 2. Tap to play a multimedia message. 3.
To pause playback of the multimedia message, tap In a single motion, touch and drag up or down the page to scroll through the message (if additional pages were added). Adding Additional Text You can copy text such as names, phone numbers, and events from your Contacts, Calendar, or a Memo. 1. While composing a message, press 2. At the Add text screen, select one of the following:
Memo: allows you to insert text from an existing S Memo.
Calendar: allows you to add the name, date, and time of a Add text. calendar event to your message.
Location: allows you to add an address and the link to the location on Google Maps.
Contacts: allows you to add the name and phone number of any of your contacts to your message.
Text templates: allows you to add pre-defined phrases and sentences. For more information, refer to Text Templates on page 106. The information is added to your message. 98 DRAFT Internal Use Only Current Recipient My Text Message Threads Sent and received text and picture messages are grouped into message threads. Threaded messages allow you to see all the messages exchanged (similar to a chat program) and displays a contact on the screen. Message threads are listed in the order in which they were received, with the latest message displayed at the top. To reply to a text message:
1. From the Home screen, Reply Bubble tap
. 2. While the message is Text Message Thread open, tap the Enter message field and then type your reply message. 3. Compose your reply. 4. Tap
(Send) to deliver your reply. or Press message options (page 95). To access message thread options:
and then select one of the available From the main Messaging screen, touch and hold the message to display the following options:
View contact: displays the Contacts Overview page.
Add to contacts: begins the process of adding the new number to your Contacts list.
Delete thread: deletes the currently selected message thread.
Add to spam numbers: adds the current sender to a spam list. ny new texts from this sender are automatically blocked. Messaging 99 DRAFT Internal Use Only To access additional Bubble options:
Touch and hold the message bubble within an active message conversation to display the following options:
Delete message: deletes the currently selected message bubble from the thread.
Copy message text: copies the currently selected message bubble from the thread.
Forward: allows you to forward the currently selected message bubble to an external recipient.
Lock/Unlock message: locks or unlocks the currently selected message bubble from being accidentally deleted.
Share: allows you to share a selected bubble via: Add to Dropbox, Bluetooth, Email, Gmail, Google, Google+, Hangouts, Memo, Messaging, or Wi-Fi Direct..
Copy to SIM: copies the currently selected message bubble as a single text message within the SIM card.
View message details: displays details for the currently selected message bubble.
Translate: translates the text from the currently selected bubble into a desired language. 100 Deleting Messages Deleting message threads 1. From the Home screen, tap 2. Touch and hold a message from the Messages list,
. then select Delete thread. or 3. Press and then tap Delete message, tap each message thread you want to delete, and tap Delete. Deleting message bubbles 1. From the Home screen, tap 2. Open a message to reveal the message string. 3. Touch and hold a message bubble, then select Delete
. message. or 4. Press and then tap Delete message, place a check mark on the individual bubbles targeted for deletion, and tap Delete. DRAFT Internal Use Only Message Search You can search through your messages by using the Message Search feature. 1. From the Home screen, tap 2. Press 3. Use the on-screen keypad to enter a word or phrase in and then tap Search. which to search, then tap
. 4. All messages that contain the entered search string display. Messaging Settings To configure the settings for text messages, multimedia messages, Voice mails, and Push messages. 1. From the Home screen, tap 2. Press
. and then tap Settings. The following Messaging settings are available:
General settings
Delete old messages: deletes old messages when the limit is reached, rather than overwriting them.
Text message limit: allows you to set a limit on how many text messages are allowed in one conversation.
Multimedia message limit: allows you to set a limit on how many multimedia messages are allowed in one conversation. Text message (SMS) settings
Delivery reports: when this option is activated, the network informs you whether or not your message was delivered.
Manage SIM card messages: allows you to manage the messages stored on the SIM card.
Message center: allows you to enter the number of your message center where your messages reside while the system is attempting to deliver them.
Input mode: allows you to set the input mode for your text messages. Choose from: GSM Alphabet, Unicode, or Automatic. Multimedia message (MMS) settings
Group messaging: when this option is activated, you can send a single message to multiple recipients within a group.
Delivery reports: when this option is activated, the network informs you whether or not your message was delivered.
Read reports: when this option is activated, your phone receives a request for a read reply along with your message to the recipient. Messaging 101 DRAFT Internal Use Only Auto retrieve: allows the message system to automatically
Use the volume key: allows you to change the text size by retrieve messages.
Roaming auto retrieve: allows the message system to automatically retrieve while roaming.
Creation mode: allows you to select the creation mode: Free, Restricted, or Warning. Restricted: you can only create and submit messages with content belonging to the Core MM Content Domain. Warning: the phone will warn you via pop up messages that you are creating a multimedia message which does not fit the Core MM Content Domain. Free: you may add any content to the message.
MMS alert: alerts you when the messaging modes changes from an SMS (text) to MMS (multimedia) mode. Display
Bubble style: allows you to choose from several bubble styles for your messages. Bubbles are the rounded boxes that surround each message.
Background style: allows you to choose from several background styles for your messages. 102 using the up or down volume keys. Push message settings
Push messages: allows you to receive push messages from the network.
Service loading: allows you to set the type of service loading notification. Choose from: Always, Prompt, or Never. Notification settings
Notifications: allows you to see message notifications on your status bar.
Select ringtone: allows you to set the ringtone for your message notifications.
Vibrate: allows you to configure the vibration mode associated with message alerts.
Message alert repetition: allows you to set the interval for new message alerts. Choose from: Once, Every 2 minutes, or Every 10 minutes.
Preview message: when enabled, allows you to view a brief preview of new message text on the Status bar. DRAFT Internal Use Only Emergency message settings
Emergency alerts: allows you to configure emergency alert settings. You can enable/disable those alert categories you wish to receive. Choose from: Imminent extreme alert, Imminent severe alert, and AMBER alerts. Note: The Presidential alert can not be disabled.
Emergency notification preview: allows you to play a sample emergency alert tone. Tap Stop to cancel the playback. Signature settings
Add signature: when enabled, this feature allows you to create a signature at the end of your outgoing text messages.
Signature text: allows you to enter a desired signature for your message. Spam message settings
Spam settings: when enabled, allows you to configure available spam settings such as:
Add to spam numbers: allows you to manually enter and assign a phone number as being sent from a spam source. Add to spam phrases: allows you to assign a specific text phrase as belonging to a spam message. Ex: Dear friend. Block unknown senders: when active, automatically blocks incoming messages from unknown sources or blocked numbers. Emergency Alert Configuration This device is designed to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS); which may also be known as the Personal Localized Alerting Network (PLAN). If your wireless provider has chosen to participate in CMAS/PLAN, alerts are available while in the provider's coverage area. If you travel outside your provider's coverage area, wireless emergency alerts may not be available. For more information, please contact your wireless provider. Emergency Alerts allows customers to receive geographically-targeted messages. Alert messages are provided by the US Department of Homeland Security and will alert customers of imminent threats to their safety within their area. There is no charge for receiving an Emergency Alert message. Messaging 103 DRAFT Internal Use Only There are three types of Emergency Alerts:
Alerts issued by the President
Alerts involving imminent threats to safety of life
AMBER Alerts (missing child alert) Customers may choose not to receive Extreme Alerts, Severe Alerts, and AMBER Alerts. Important! Alerts issued by the President can not be disabled. Assigning Messages as Spam You can now assign either a phone number as spam or use a key term or phrase. Any message assigned as spam is automatically placed with your Spam messages folder. To assign a phone number from Messages list as spam:
1. From the Home screen, tap 2. Touch and hold a message from a phone number. 3. Select Add to spam numbers and tap OK. To disable Extreme, Severe, and AMBER Alerts:
To assign a phone number manually as spam:
. and then tap Settings. 1. From the Home screen, tap 2. Press 3. Scroll to the bottom and select Emergency alerts. All alerts are enabled by default (check mark showing). 4. Tap on an alert option to disable the alert and remove the check mark. 1. From the Home screen, tap 2. Press 3. Locate and activate the Spam settings option. and then tap Settings.
Spam settings: when enabled, allows you to configure available spam settings such as:
4. Tap Add to spam numbers
(Add).
This function allows you to manually enter and assign a phone number as being sent from a spam source. 104 DRAFT Internal Use Only 5. Tap the Number field to manually enter phone number. 4. Tap Add to spam phrases
(Add). or Tap Contacts. to select from either your existing Logs or or Tap Match criteria and select a parameter that must match for the spam action to take effect. Choose from:
Same as, Starts with (ex: 800 or 888), Ends with, or includes. 6. Tap Save. To register text phrases as spam:
Some incoming messages might not be associated with a phone number but rather an email address. In these cases, the only way to block those messages, would be assign a key used term or phrase to activate the Spam block. Ex:
Dear friend, Stock Alert, or Act Now. 1. From the Home screen, tap 2. Press 3. Locate and activate the Spam settings option. and then tap Settings.
This function allows you to assign a specific text phrase as belonging to a spam message. Ex: Dear friend. 5. Enter a term or word into the field. 6. Tap Save. To register unknown numbers as spam:
Some incoming messages might not be associated with either a phone number or email address. These incoming messages contain no information as their info is blocked by the sender. and then tap Settings. 1. From the Home screen, tap 2. Press 3. Locate and activate the Spam settings option. 4. Tap Block unknown senders. A green check mark indicates the feature is active.
Block unknown senders: when active, automatically blocks incoming messages from unknown sources or blocked numbers. If an incoming message is designated in coming from an unknown sender, it is automatically assigned as spam and is now located in your Spam folder. Messaging 105 DRAFT Internal Use Only Accessing Your Spam Folder Any message assigned as spam is automatically placed with your Spam messages folder. 1. From the Home screen, tap 2. Press and then tap Spam messages. Text Templates This screen displays your available text message reply templates. This is a readily accessible list of both default and user-defined text snippets that can be used to quickly reply to incoming messages. 1. From the Home screen, tap 2. From the Messaging list, press
. and then tap Text templates. 3. Tap a message to immediately insert it into your current message conversation. 106 To create your own text template:
1. From the Home screen, tap 2. From the Messaging list, press
. Text templates. and then tap 3. Tap 4. Enter a new text string and tap Save.
(Create text template). Using Email Email (or Internet Email) enables you to review and create email using several email services. You can also receive text message alerts when you receive an important email. Your phones Email application lets you access and manage multiple email accounts simultaneously in one convenient location. There are currently three main types of email accounts on your phone: Gmail, Internet-based email (Gmail, Yahoo, etc..), and Microsoft Exchange (Corporate email or Outlook). To send and receive email messages through an ISP (Internet Service Provider) account, or if you wish to use your device to access your corporate email through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account. DRAFT Internal Use Only IMAP (Internet Message Access Protocol) - This protocol is frequently used in large networks and commercial settings. IMAP4 is the current standard.
POP3 (Post Office Protocol) - This protocol is supported by most ISPs (Internet service providers) and common among consumer applications. POP3 is the current standard.
Microsoft Exchange ActiveSync - This protocol is frequently used with a large corporate email server system and provides access to email, contact, and calendar synchronization. Creating an Internet Email Account
(Apps) 1. From the Home screen, tap
(Email). Note: If you have already set up an email account and want to add an additional email account, press tap Settings Add account. and then 2. Enter your Email address and Password information.
Tap Show password to display the password as you enter it in the associated field.
Tap Manual setup to configure your connection settings manually (POP3, IMAP, or Microsoft Exchange ActiveSync). Follow the on-screen prompts and enter the information specific to your email provider. 3. Tap Next. 4. Follow the on-screen instructions. Important! The Sync Email feature must be enabled to allow synching between your device and the remote server. Messaging 107 DRAFT Internal Use Only 5. Tap Done to store the new account. 3. Select an email account and tap an email message. Messages for this account display on the Inbox tab. You can also view Personal information for this account, Receipts (if you setup the account to return receipts), Travel information, and more (if available). Opening an Email 1. From the Home screen, tap
(Email). Account name Refreshing Email messages 1. From the Home screen, tap 2. Select an email account.
(Email).
If you are already in an email account, tap the account name field (upper-left) to open the complete email account list page.
Select an available email account. 3. Tap
(Refresh). Composing Email 1. From the Home screen, tap 2. Tap
(account name field upper-left) to open
(Email). Access available accounts and folders Email functions 2. Tap
(account name field upper-left) to open the complete email account list page.
Selecting Combined view allows you to view all the emails for your current accounts, managed by the application, to be listed on a single screen. 108 the complete email account list page. 3. Tap Inbox 4. Enter the recipients email address in the To field.
(Compose).
If you are sending the email message to several recipients, separate the email addresses with a comma. You can add as many message recipients as you want. 5. Tap Cc/Bcc to add additional carbon copy and blind copy recipients.
Use the Cc field to carbon copy additional recipients.
Use the Bcc field to blind copy additional recipients. DRAFT Internal Use Only 6. Tap the Subject field and enter the email subject. 7. Tap the email text field and compose your email message.
To add an attachment (such as image, video, audio, etc..), Attach (from the top of the screen) and make a tap category selection. Tap the file you wish to attach. Tap to delete the attached file. Note: If you attach an image to your email, you have the option to resize it prior to delivery. Choose from: Original, Large (70%), Medium (30%), or Small (10%). Once chosen, tap either Always or Just once. 8. Tap
(Save) to store a draft of the current email on your device so that you can come back later and continue the email. 9. Tap 10. Once complete, tap
(Send).
(Delete) to discard the current email. Configuring Email Settings 1. From the Home screen, tap 2. Select an account. 3. Press
(Email). and then tap Settings and alter any of the following General settings:
Display: allows you to configure the way in which your email list is displayed. Options include: Auto fit content, Message preview line, and Title line list.
Composing and sending: allows you to configure the functions available during both creating and sending emails. Options include: Quick responses, Default image size, and Delay email sending.
Auto advance: allows you to assign an action after an email is deleted. Choose from: Next email, Previous email, or Email list.
Confirm deletions: requires that you provide confirmation before deleting a selected email.
Priority senders: allows you to configure these parameters:
Priority senders, Set as the default folder, Email notifications, Select ringtone, and Vibrate.
Spam addresses: allows you to create a list of spam email addresses. Messaging 109 DRAFT Internal Use Only Rules for filtering: allows you to create and manage filters for emails. Filter parameters include: Filter name, Subject includes, or From. and then tap Settings Account settings or Press
<Account>. Alter any of the following settings:
Sync settings to configure the following sync options:
Sync Email: enables automatic email synching between your device and the remote server. Sync schedule: allows you to control the email sync schedule on both Peak and Off-Peak times. Size to retrieve emails: configures the incoming email size allowed to pass through to your phone automatically without user interaction. Emails with attachments larger than configured will have to be retrieved manually.
Signature: Lets you attach a customized signature to the bottom of all outgoing emails. In a single motion touch and slide the Signature slider to the right to turn it on. Tap the Signature field, change the current text, and tap Done to save the new signature.
Default account: Assign this account as the default email account used for outgoing messages.
Email notifications: Activates the email notification icon to appear within the Notifications area of the status bar when a new email (Gmail, etc..) is received.
Select ringtone: Plays a selected ringtone when a new email message is received.
Vibrate: Activates a vibration when a new email message is received. 4. Tap the More settings field to access additional options:
Account name: displays your uniquely created account display name.
Your name: displays the name used in the From field of your outgoing email messages. 110 DRAFT Internal Use Only Always Cc/Bcc myself allows you to include your own email address in either the CC, Bcc, or None fields. Lets you always receive a copy of outgoing emails.
Show images: allows you to view embedded images located within the body of the currently displayed email.
Security options: allows you to enable several security options such as: Encrypt all, Sign all, Create keys, Private keys, Public keys, and Set default key. These security policies could restrict some functions from corporate servers.
Number of emails to load: allows you to select the number of on-screen emails to keep loaded on the screen by default.
Auto download attachments: allows the device to automatically download email attachments when an active Wi-Fi connection is detected. This process speeds up the process of downloading an emails attachments for offline review by not using a 3G or 4G/LTE network connection.
Auto resend times: enables the device to resend an outgoing email a specified number of times if delivery fails.
Incoming settings: Lets you specify incoming email settings, such as Email address, Username, Password, IMAP server, Security type, Port, and IMAP path prefix.
Outgoing settings: Lets you specify outgoing email settings, such as SMTP server, Security type, Port, Require sign-in, User name, or Password. Note: Some the above options may not be displayed when using some Internet account types. Microsoft Exchange Email (Outlook) Your device also provides access to your companys Outlook Exchange server. If your company uses either Microsoft Exchange Server 2003 or 2007, you can use this email application to wirelessly synchronize your email, Contacts, and Calendar information directly with your companys Exchange server. Messaging 111 DRAFT Internal Use Only Setting Up a Microsoft Exchange Email account 1. From the Home screen, tap
(Email). Note: If you have already set up an email account and want to add an additional email account, press tap Settings Add account. and then 2. Enter your Email address and Password information.
Tap Show password to display the password as you enter it in the associated field.
Tap Send email from this account by default to default all new outgoing emails to use this account. 3. Follow the on-screen instructions. Note: If prompted with an on-screen notification that the connection that the Setup could not finish, tap Edit details to continue with a manual update of necessary information. 112 Important! Remember to manually place the cursor in the correct spot and enter a Domain name before the
[Domain]\[user name] entry. Most servers only provide a username. 4. Consult your IT Administrator if it is necessary to enable the Activate Device Administration option. Identify your new work email account with a unique name (Ex: Work), then tap Done. 5. Opening an Exchange Email 1. From the Home screen, tap
(Email). 2. Tap the account name field (upper-left) to open the complete email account list page. 3. Select an exchange email account and tap an email message. Refreshing Exchange Email 1. From the Home screen, tap 2. Select an email account.
(Email).
If you are already in an email account, tap the account name field (upper-left) to open the complete email account list page.
Select an available email account. DRAFT Internal Use Only 3. Tap
(Refresh). Composing Exchange Email For more information, refer to Composing Email on page 108. Deleting an Exchange Email Message Tap the checkbox field adjacent to the email and tap
(Delete) or With the email message displayed, tap
(Delete). Configuring Microsoft Exchange Email Settings 1. From the Home screen, press and then tap Settings and then navigate to the Accounts area. 2. Tap the Microsoft Exchange account. 3. Press and then tap Settings and alter any of the following General settings:
Display: allows you to configure the way in which your email list is displayed. Options include: Auto fit content, Message preview line, and Title line list.
Composing and sending: allows you to configure the functions available during both creating and sending emails. Options include: Quick responses, Default image size, and Delay email sending.
Auto advance: allows you to assign an action after an email is deleted. Choose from: Next email, Previous email, or Email list.
Confirm deletions: requires that you provide confirmation before deleting a selected email.
Priority senders: allows you to configure these parameters:
Priority senders, Set as the default folder, Email notifications, Select ringtone, and Vibrate.
Spam addresses: allows you to create a list of spam email addresses.
Rules for filtering: allows you to create and manage filters for emails. Filter parameters include: Filter name, Subject includes, or From. or Press
<Microsoft Account>. Alter any of the following settings:
and then tap Settings Account settings Messaging 113 DRAFT Internal Use Only Sync settings to configure the following sync options:
Sync Email: enables automatic email synching between your device and the remote server. Sync schedule: allows you to control the email sync schedule on both Peak and Off-Peak times. Period to sync Email to assign the sync range for your incoming and outgoing email messages between your phone and your external exchange server. How many days worth of email messages should the phone and server synchronize. Choose from: Automatic, All, 1 day, 3 days, 1 week, 2 weeks, or 1 month. Size to retrieve emails configures the incoming email size allowed to pass through to your phone automatically without user interaction. Emails with attachments larger than configured will have to be retrieved manually.
Signature: lets you attach a customized signature to the bottom of all outgoing emails. In a single motion touch and slide to the right to turn it on. Tap the Signature field, change the current text, and tap Done to save the new signature.
Out of office settings allows you to both activate/deactivate your emails out of office settings, and configure both the start/end dates and your outgoing message.
Default account: assign this account as the default email account used for outgoing messages.
Password: allows you to update your password to match the email server.
Email notifications: activates the email notification icon to appear within the Notifications area of the status bar when a new email is received.
Select ringtone: plays a selected ringtone when a new email message is received.
Vibrate: activates a vibration when a new email message is received. 4. Tap the More settings field to access additional options:
Account name displays the name used by the device to track the account.
Always Cc/Bcc myself allows you to include your own email address in either the CC, Bcc, or None fields. Lets you always receive a copy of outgoing emails. 114 DRAFT Internal Use Only Show images: allows you to view embedded images located
In case of sync conflict allows you to assign the master within the body of the currently displayed email.
Auto download attachments: allows the device to automatically download email attachments when an active Wi-Fi connection is detected. This process speeds up the process of downloading an emails attachments for offline review by not using a 3G or 4G/LTE network connection.
Auto resend times enables the phone to resend an outgoing email a specified number of times if delivery fails. The default is 10 auto resends.
Folder sync settings allows you to configure the sync settings for various folders such as Inbox, Drafts, Outbox, etc..
Period to sync Calendar assigns a period for your phone to sync calendar events. Choose from: 2 weeks, 1 month, 3 months, 6 months, or All calendar.
Empty server trash: allows you to delete your email accounts trash bin remotely. source on emails. If there is a conflict with the current email sync you can assign the server as the main source for all emails (Server has priority) or assign the phone to be the main source and update the server accordingly (Device has priority).
Security options: allows you to enable several security options such as: Encrypt, Encryption algorithm, Sign, Sign algorithm, Email encryption cert, Email signing cert, and Security policy list. These security policies could restrict some functions from corporate servers. Security policy list: lists the current emails security policy. These policies could restrict some functions from corporate servers.
Sync Contacts synchronizes the contacts between your device and the remote exchange server.
Sync Calendar synchronizes your exchange calendar entries between your device and the remote exchange server.
Sync Task synchronizes your exchange tasks entries between your device and the remote exchange server. Messaging 115 DRAFT Internal Use Only Exchange server settings provides access to the Domain\user name, Password, and Exchange server settings. 5. Press to return to the previous page. 116 DRAFT Internal Use Only Section 7: Multimedia This section explains how to use the multimedia features of your device, including the Camera/Camcorder, Music Player, Samsung Link, and how to manage your photos, images and sounds. You can take photographs and shoot video by using the built-in camera functionality. Your camera produces photos in JPEG format. Important! Do not take photos of people without their permission. Do not take photos in places where cameras are not allowed. Do not take photos in places where you may interfere with another persons privacy. Note: An SD card is no longer needed to take pictures or shoot video since there is already built-in storage. Assigning the Default Storage Location Important! Too many users can overlook this storage location until something goes wrong. It is recommended that you verify this location or change it before initiating the use of the camera or camcorder features. 1. From the Home screen, tap
(Apps)
(Camera). 2. Press and then tap Settings and scroll up to the Storage entry.
(Settings) 3. Tap this entry and select the desired default storage location for newly taken pictures or videos. Choose from: Device or Memory card. Note: It is recommended that you set the option to Memory card. 4. Press to return to the Home screen. Multimedia 117 DRAFT Internal Use Only 4. If desired, before taking the photo, you can tap on-screen icons to access various camera options and settings. 5. You can also tap the screen to move the focus to a desired area of interest. 6. Tap
(Camera) until the shutter sounds. (The picture is automatically stored within your designated storage location (page 117). If no microSD is installed, all pictures are stored on the Phone.) For more information, refer to Camera Options on page 119. Using the Camera Taking Photos Taking pictures with your devices built-in camera is as simple as choosing a subject, pointing the camera, then pressing the camera key. Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo. 1. From the Home screen, tap
(Apps)
(Camera). 2. Using the devices main display screen as a viewfinder, adjust the image by aiming the camera at the subject. 3. Before you take a picture, use the Up and Down Volume keys to zoom in or out. You can magnify the picture up to x4 (400 percent). or Pinch the screen to zoom out or pinch outwards to zoom in. 118 DRAFT Internal Use Only Self-portrait Camera mode Quick Settings Battery Charge Take Picture Image viewer Viewfinder Effects Mode (Change) Record video button Camera Options Options are represented by icons across both sides of the screen. 1. From the camera viewfinder, tap the Mode button to change the mode to one of the following:
MODE Auto: Use this mode to automatically adjust the exposure, color, and brightness settings. This mode allows single image shots or burst shots. Beauty face: Use this to take photos with lightened faces for gentler images. Sound & shot: Use this mode to enrich pictures by adding background sounds for a few seconds. The background sound is recorded for up to 9 seconds after taking the photo. Panorama: Use this to take wide panoramic photos. Press the Shutter button to take a photo, and then move the camera in any direction. When the blue frame aligns with the preview screen, the camera automatically takes another shot in the panoramic sequence. To stop shooting, press the Shutter button again. Sports: Use this to take fast action photos. Multimedia 119 DRAFT Internal Use Only Night: Use this to take brighter, clearer pictures in low light settings without the use of the flash. 2. From the top of the camera, the following shortcuts are available for the camera:
Focus area: displays the area of the image used as the main focus area. If the image is too close, the square will turn red. Self portrait: allows you to set the front camera so you can take pictures of yourself. Quick Settings: activates the Quick Settings menu bar from where you can select several additional settings.For more information, refer to Quick Settings on page 121. Image viewer: allows you to access the Image viewer and the various viewing options for a selected picture. The last picture you took, will be displayed as a thumbnail in the Image viewer icon. 120 Effects/Downloads: provides access to pre-installed and downloaded effects. Default effects include:
No effect, Grey-scale, Sepia, and Negative. Camcorder button: shoots a video when pressed. Camera button: takes a photo when pressed in Camera mode. MODE Mode button: allows you to select from different camera modes. Storage location/Connection Status: indicates the device is connected to an adapter and the current storage location for images (Device or Memory card) on the device. DRAFT Internal Use Only Quick Settings Tap at the top of the display to quickly change Camera settings. Not all of the following options are available in both still camera and video camera modes. The available options vary by mode. Camera settings: configure Camera settings. Flash: activate or deactivate the flash. Voice control: activate or deactivate the voice control to take photos. Timer: activate or deactivate the timer feature. Recording mode: select a resolution for videos. Choose from: Normal or Limit for MMS. Share functions: activate or deactivate the sharing options. Choose from Off, Share Shot, or Buddy photo share. Share shot - Shooting mode: lists the current shooting modes available from with the Share Shot mode. Choose from Easy connect, Wi-Fi Direct, or Cancel. Quick Settings: hide Quick settings. Camera and Camcorder Settings This section describes the different settings that you can configure on your camera. Not all of the following options are available in both still camera and video camera modes. The available options vary by mode. 1. From the viewfinder, tap
(Camera Settings).
(Quick Settings) 2. The follow settings are located under the Camera, Camcorder, and General tabs. The settings that are displayed will depend on what camera mode you are in. Camera:
Photo size: Select a resolution for photos. Use higher resolution for higher quality. Higher resolution photos take up more memory. Default is 2560x1440 (16:9) Multimedia 121 DRAFT Internal Use Only Focus mode: allows you to assign the focus settings. Choose
Review: set this option if you want to view each picture after from Auto focus or Macro.
Metering: allows you to set how the camera measures or meters the light source: Center-weighted, Matrix, or Spot.
ISO: determines how sensitive the light meter is on your digital camera. Choose from Auto, 100, 200, or 400. Use a lower ISO number to make your camera less sensitive to light, a higher ISO number to take photos with less light, or Auto to let the camera automatically adjust the ISO for each of your shots. Camcorder:
Video size: Select a resolution for videos. Use higher resolution for higher quality. Higher resolution videos take up more memory. Settings:
GPS tag: attach a GPS location tag to the photo. To improve GPS signals, avoid shooting in locations where the signal may be obstructed, such as between buildings or in low-lying areas, or in poor weather conditions. Your location may appear on your photos when you upload them to the Internet. To avoid this, deactivate the GPS tag setting. 122 you take it. Select a time value.
Volume key: assigns a function to the volume key. Choose from The zoom key, The camera key, or The record key.
Timer: Use this for delayed-time shots. You can set the timer to Off, 2 sec, 5 sec, or 10 sec.
White balance: Select an appropriate white balance, so images have a true-to-life color range. The settings are designed for specific lighting situations. These settings are similar to the heat range for white-balance exposure in professional cameras.
Exposure value: allows you to adjust the brightness level by moving the slider.
Guidelines: Display viewfinder guides to help composition when selecting subjects.
Flash: activate or deactivate the flash.
Voice control: activates/deactivates voice control feature that allows you to verbally take a photo.
Contextual filename: allows you to have your location added as part of the filename. You must first activate GPS tag described above. DRAFT Internal Use Only Save as flipped: when set to On, this option allows you to take
Share via
: allows you to share the picture via Group and save a mirror-image video when using self-recording mode.
Storage: Select the memory location for storage.
Shutter sound: Turn the shutter sound on or off.
Reset: Reset the camera settings. Pictures and Videos Image Viewer Options After you take a photo or record a video, you can access various options. Photo viewing options 1. Tap a thumbnail to view the picture. Play, Add to Dropbox, Bluetooth, Email, Gmail, Google+, Hangouts, Messaging, Picasa, and Wi-Fi Direct.
Edit
: (when in Landcsape mode) allows you to edit the current image. Launches the Photo Editor application. For more information, refer to Editing a Photo on page 133. Note: The photo editor application is not preloaded and must be downloaded from the Play Store or via Samsung Apps.
Delete
: allows you to delete the current picture. Note: If no control icons are displayed on the screen in 3. Press for additional options such as:
addition to the picture, tap anywhere on the screen to display them. 2. The following options are available at the top of the screen:
Change player
: allows you to select a different streaming device from your available list. Edit: (while in Portrait mode), allows you to assign the current image as a favorite. Favorite: allows you to assign the current image as a favorite. Slideshow: allows you to see your photos in a slideshow. Photo frame: takes the current image and creates a surrounding photo frame that can be edited with edited text or drawn object, then saved. Multimedia 123 DRAFT Internal Use Only Photo note: allows you to write notes on your current image and then save it. Copy to clipboard allows you to copy one or more pictures to a different folder. Set as: allows you to assign the current image as either a Contact photo, Home screen, Lock screen, or Home and lock screens. Details: files details such as Title, Time, Width, Height, Print: allows you to print the current image on a compatible Orientation, File Size, and Path. Samsung printer. Rename: allows you to rename the current file. Buddy photo share: allows you to share the current image with active buddies. Rotate left: allows you to rotate the view of the current image in a counterclockwise direction. Rotate right: allows you to rotate the view of the current image in a clockwise direction. Crop: provides an on-screen box that allows you to crop the current picture. Tap Done to update the image with the new dimensions or tap Cancel to ignore any changes. Set as: allows you to assign the current image as a Contact photo, Home screen, Lock screen, or Home and lock screens. Scan for nearby devices: scans for nearby DLNA-compliant devices that can receive or display the current image. Settings: provides access to the Gallery options menu. Choose from Account, SNS data management, Tags, and Sound & shot. Video viewing options Note: If no control icons are displayed on the screen in addition to the picture, tap anywhere on the screen to display them. 1. Tap a video to select it. 2. Tap to play the video. or Tap the image on-screen and select:
Share via
: allows you to share the video via Add to Dropbox, Bluetooth, Email, Gmail, Google+, Messaging, Picassa, Wi-Fi Direct, or YouTube. 124 DRAFT Internal Use Only Trim
: activates the Trim feature so that you can edit the 2. Using the cameras main display screen as a length of the current video.
Delete
: allows you to delete the current video. Choose either OK or Cancel. 3. Press for additional options. Using the Camcorder In addition to taking photos, the camera also doubles as a camcorder that also allows you to record, view, and send high definition videos. Shooting Video Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your subject with sufficient light by having the light source behind you. Note: The camera may not be able to properly record videos to a memory card with a slow transfer speed. 1. From the Home screen, tap
(Camera) to activate the camera mode.
(Apps) viewfinder, adjust the image by aiming the camcorder at the subject. 3. Before you take a video, use the Volume control buttons to zoom in or out. You can magnify the video up to x4 (400 percent). Note: Use either the Up and Down volume keys or spread/
pinch the screen to zoom in or out. For more information, refer to Navigating Through the Screens on page 37. 4. Tap the Video key (
) to begin shooting video. The red light will blink while recording. 5. Tap anywhere on the screen to re-focus the camera on that object. The camcorder auto-focuses on the new target area. 6. Tap the Stop key (
) to stop the recording and save the video file to your Camera folder. or Tap the Pause key (
) to pause the recording. Multimedia 125 DRAFT Internal Use Only 7. Once the file has been saved, tap the image viewer,
Delete
: allows you to delete the current video. then tap
(Play) to playback your video for review. Choose either OK or Cancel. 8. Press to return to the viewer. Accessing Videos When you shoot a video, the file is saved in the Camera folder. You can view your videos immediately or view them anytime in the Camera folder. 1. From the Home screen, tap
(Apps)
(Gallery). 2. Select a folder location and tap a video icon to begin video playback. 3. Tap
(Play) to begin video playback. or Touch and hold the video icon from the main Gallery to select the video (indicated by a colored border) and display the following video menu context options:
Share via
: allows you to share the video via Add to Dropbox, Bluetooth, Email, Gmail, Google+, Messaging, Picassa, Wi-Fi Direct, or YouTube. 126 or Touch and hold a listed video file to place a check mark alongside and then press for additional options:
Slideshow: allows you to see your files in a slideshow or access the slideshow settings. Copy: allows you to create a duplicate of the currently selected file. Move: allows you to move a selected file to a new location. Hide items: allows you to hide the current file from appearing in the Gallery. Show items: allows you to un-hide any previously hidden files. Rename: allows you to rename the filename of the currently selected video. Details: displays video file information. or With the video displayed on-screen (but not playing), press for additional options:
Favorite: tags the current video as a favorite file. DRAFT Internal Use Only Slideshow: allows you to see your files in a slideshow or
Share Shot is a great way to instantly share a series of pictures access the slideshow settings. Rename: allows you to rename the filename of the currently selected video. Details: displays video file information. Settings: provide access to the Galley settings page. From this page you can configure the SNS data management and Tag options. Sharing Pictures Pictures are the best way of remembering the moment, but an even better treat is to share them with others. Two new features allow you to either instantly share a series of pictures as they are taken or quickly share a picture without using email or messaging. among a group of users. The best example for this feature is having multiple users instantly sharing each others pictures at a company or family gathering. As each person takes a separate picture with their own device, they are all pooled together and instantly appear in each users Gallery. No more Email your pictures to me later. Each person walks out of the event with all the pictures taken by everyone. This method of image transfer requires that both devices have Wi-Fi Direct active and be paired prior to use. Note: You can only share a shot with other external users who also have their Wi-Fi Direct feature active.
S Beam Transfer uses the NFC (near Field Communication) feature found on your device to transmit large files directly to another compatible device by direct touch. This method of image transfer requires NFC and S Beam to be enabled prior to use. For more information, refer to Using S Beam to Share Pictures on page 130. Multimedia 127 DRAFT Internal Use Only Enabling Share Shot Share shot is a Wi-Fi Direct group sharing feature where multiple users can Wi-Fi connect their devices and then all share each others pictures in real-time. This is really useful in group events (ex: family gathering or company party) where you dont want to have to email everyone later and make sure you all can share your pics at a later date. For more information, refer to Wi-Fi Direct Setup and Settings on page 219. The general process is:
Enable Wi-Fi Direct communication
Pair your device with other users
Enable Share shot To enable Wi-Fi Direct:
Important! The target device must already be connected to the same Wi-Fi and have its Wi-Fi Direct feature active and scanning before you can your pairing. 1. From the main Settings page, tap Connections tab. 128 2. In a single motion touch and slide the Wi-Fi slider to the right to turn it on. The slider color indicates the activation status. 3. Tap Wi-Fi Direct. 4. Tap Scan and select the single device name to begin the connection process to another Wi-Fi Direct compatible device. or Tap Multi-connect names to begin the connection process to these Wi-Fi Direct compatible devices. Scan and select all the device Note: The target device must also have Wi-Fi Direct service active and running before it can be detected by your device. 5. Tap Done. The direct connection is then established. Confirm appears in the Status bar. 6. When prompted to complete the connection, the recipient should tap OK. Your status field now reads Connected and your connected device is listed within the Wi-Fi Direct devices listing. DRAFT Internal Use Only 7. Each partner (including yourself) must then tap Accept To configure your Share Shot options:
to consent to the new Wi-Fi Direct pairing. 1. Confirm the Share Shot viewfinder is active (
To enable Share shot on Camera:
1. From the Home screen, tap
(Camera)
(Share shot). 2.
(Share)
(Quick Settings) If you are prompted to activate your Wi-Fi Direct connection, tap OK and follow the activation procedures for Wi-Fi Direct. appears at the top of the screen). 2. Tap
(Devices for sharing with) to display list of current share shot participants.
Stop sharing images with select participants by tapping their entry and removing the green check mark. 3. Tap
(Shooting modes) to regain access to the Share menu. 4. Tap Off to disable share shot while maintaining a Wi-Fi Direct connection. To take share shot images:
1. Tap 2. From the Home screen, tap
(Camera) until the shutter sounds.
(Apps)
(Gallery) to locate your newly shot images located in their default storage location.
External users will be able to locate their images in either a downloaded or RECV (received) folder. 3. Confirm
(Share shot images delivered/received) appears in the Notifications area of the screen. Multimedia 129 DRAFT Internal Use Only 7. Place the two active NFC-enabled devices back to back to begin. Note: If the Touch to beam screen does not appear on the source device:
- Pull them apart
- Verify the image is visible in the preview window on the source device (providing the file)
- Place them together again 8. From the Touch to beam screen, tap the reduced image preview to begin the transfer. After a few seconds
(depending on file size) the recipient with then see the transferred file displayed on their screen. Using S Beam to Share Pictures This feature (when activated via NFC) allows you to beam large files directly to another compatible device that is in direct contact. These files can be larger, such as Videos, HD pictures, and other large files.You can beam images and videos from your gallery, music files from your music player, and more. 1. From the main Settings page, tap Connections tab. 2. If not already active, in a single motion touch and slide the NFC slider to the right to turn it on. 3. Tap S Beam and make sure the feature is turned on. 4. If not already active, in a single motion touch and slide the S Beam slider to the right to turn it on. 5. On the source device (containing the desired image or video), tap
(Apps)
(Gallery). 6. Locate and tap the selected image to open it in the preview window. Important! Neither device must be in Lock mode or displaying the Lock screen. They must both be active and unlocked. It is recommended that the target device be on the Home screen. 130 DRAFT Internal Use Only To share multiple pictures via S Beam:
1. On the source device (containing the desired image or video), tap
(Apps) 2. Locate the selected folder. 3. Touch and hold the first image and place a check mark
(Gallery). on it and all desired images. 4. Place the two active NFC-enabled devices back to back to begin. 5. From the Touch to beam screen, tap the reduced image preview to begin the transfer. 6. When prompted, separate the two devices. Camera Gallery Options The Gallery is where you can access the Gallery of stored camera images. 1. From the Home screen, tap
(Apps)
(Gallery). 2. Select a folder location (ex: Camera) and tap an image to open it. or Touch and hold an image to place a box around the file and select multiple files. or Tap the upper-right camera to begin taking pictures that are placed in this folder. or 3. Tap the on-screen image to use additional image menu options. For more information, refer to Pictures and Videos Image Viewer Options on page 123. Multimedia 131 DRAFT Internal Use Only 6.
(AllShare Controller enabled) appears in Confirm the Notification area at the top of the device to indicate you are using your device as the media source. Assigning an Image as a Contact Photo 1. From the Home screen, tap
(Apps)
(Gallery). 2. Select a folder location and tap a file to open it. 3. With the image displayed, press and then tap Set as Contact photo. 4. Tap a contact to make a selection. 5. Use the on-screen crop the image by dragging it around or out from its corners. 6. Tap Done to store the new image. Sharing a Gallery Image to a Target Device Important! Make sure all communicating devices are connected to the same Wi-Fi. 1. Launch Samsung Link on the target device (such as an Internet TV, Samsung Tablet, etc..). 2. From the Home screen, tap
(Apps)
(Gallery). Note: You must be signed in to your Samsung Account before you can use this feature. 3. Open a selected image. 4. Tap
(Stream to connected devices) and select an available target device to begin streaming. 5. On a target device (ex: Internet TV) select the on-screen Allow button to continue. Note: At this stage your device is requesting access to share media with the external source. 132 DRAFT Internal Use Only Editing a Photo You can edit your photos using the built-in Photo editor application on your device. The photo editor application provides basic editing functions for pictures that you take on your phone. Along with basic image tuning like brightness, contrast, and color it also provides a wide variety of effects used for editing the picture. 1. From the Home screen, tap
(Apps)
(Gallery). 2. Select a folder location and tap a file to open it. 3. With the image displayed, press and then tap Edit. 4. Select Download to begin the process of downloading the application from within Samsung Apps. Assigning an Image as a Wallpaper 1. From the Home screen, tap
(Apps)
(Gallery). 2. Select a folder location and tap a file to open it. 3. With the image displayed, press and then tap Set as. 4. Select one of the these options:
Home screen assigns the current image to the home screen background. This image is spread across all available screens.
Lock screen assigns the selected image to the background for the lock screen.
Home and lock screens assigns the current image to both the Home screen and Lock screens. 5. Touch and drag the crop box anywhere on the picture. Touch and drag the sides of the crop box to zoom in or out to create a cropped area. 6. Tap Done to assign the wallpaper image. or Tap Cancel to stop without updating the wallpaper image. Multimedia 133 DRAFT Internal Use Only The Gallery The Gallery is where you view photos and play back videos. For photos, you can also perform basic editing tasks, view a slideshow, set photos as wallpaper or caller image, and share as a picture message. Note: If the phone displays a memory full message when accessing the Gallery, access Files and remove some of the media files from the folders, and then open the Gallery. Opening the Gallery From the Home screen, tap
(Gallery). For more information, refer to Camera Gallery Options on page 131.
(Apps) Note: If you stored your files in folders (directories) on the storage card, Gallery displays these folders as separate albums. The top left album contains all the pictures in the storage card. 134 Viewing a Video within the Gallery 1. From the Home screen, tap
(Apps)
(Gallery). 2. Locate your folder and video. 3. Tap
(Play) to playback your video. AllShare Cast Hub This hardware allows you to enjoy whats currently on your device directly on your TV. Note: There is no need to be connected to a Wi-Fi network or to be logged into your Samsung Account to use this feature. AllShare Cast Hub establishes a WI-Fi Direct connection between the device and the hub. For more information about this device, go to:
http://www.samsung.com/us/mobile/cell-phones-accessories/EAD-
T10JDEGSTA DRAFT Internal Use Only Connecting AllShare Cast Hub To connect your AllShare Cast Hub hardware:
Screen Mirroring
(with Hub accessory) This feature functions with an external AllShareCast Hub to fully mirror what is currently displayed on your device to the external TV. 1. Connect the AllShare Cast Hub to a power source via the USB Travel Adapter. Note: The status LED begins to blink solid red to indicate it has begun the start up process. LED Color/Patterns Red - Solid Red - Blinking Description Indicates the AllShare Cast Hub is booting or processing. Indicates the AllShare Cast Hub is in standby mode (ready for connection). Blue - Solid Indicates the AllShare Cast Hub is ready to be connected with a new device. 2. Connect your TV to the AllShare Cast Hub via an HDMI cable (A-to-A cable). 3. Change the source input on your TV to match the input port used by the incoming HDMI cable. Note: The television screen should now display an on-screen tutorial showing you how to configure your devices AllShare Cast Hub and device settings. To activate Screen Mirroring on your device:
1. From the Home screen, press and then tap
(Connections tab) Screen Settings Mirroring. If not already on, tap the Screen Mirroring and then move the slider to the right to turn it on. The slider color indicates the activation status. 2. Multimedia 135 DRAFT Internal Use Only Section 8: Applications and Development This section contains a description of each application that is available in the Applications Menu, its function, and how to navigate through that particular application. If the application is already described in another section of this user manual, then a cross reference to that particular section is provided. Note: This manual only addresses applications that have been loaded on your [device/computer/tablet] as of the date of purchase. Information concerning third party applications that you may choose to download from the Google Play Store or otherwise should be obtained from the application provider directly. Tip: To open applications quickly, add the icons of frequently-used applications to one of the Home screens. For more information, refer to Customizing the Screens on page 40. You can also add an application icon as a Primary Shortcut that will display on all Home screens. If you add an application as a primary shortcut, the application icon will not be displayed in the Applications menu. 136 Applications The Applications list provides quick access to all the available applications on the device. The Application menu provides quick access to the most frequently used applications. Applications display on each of the three panels on the Applications screens. Important! Once you log into your Google account. All previously downloaded apps should now be populated within the Application screens. Application Screen Menu Settings When on the Apps screen, the following menu options are available:
1. Press 2. Press
(Apps). and then tap and then select from the following options:
Play Store: provides quick access to the Play Store (page 189).
Edit: allows you to organize your current applications by moving them around the screen, edit or delete existing Apps folders. DRAFT Internal Use Only Accessing Recently-Used Apps 1. Press and hold from any screen to open the recently-used applications window. 2. Tap an icon to open the selected application. or Tap or Tap to go to the Task manager. to go to Google Search. or Tap applications. to delete the record of all recently used
Create folder: allows you to create an application folder where you can better organize and group desired apps.
Uninstall: allows you to uninstall a user-downloaded application. Only those applications that are not default to the device can be downloaded. Tap to remove the selected app.
Downloaded applications: allows you to filter the view of apps to only those applications that you have downloaded.
View type: allows you to customize the way the Apps menu listing is shown.
Share apps: allows you to share information about selected applications with external users.
Hide applications: allows you to specify which current applications are hidden from view in this menu. Once you have selected the apps, tap Done.
Show hidden applications: allows you to specify which previously hidden applications are can be made visible again for viewing in this menu. Once you have selected the apps, tap Done. 3. Press to return to the Home screen. Applications and Development 137 DRAFT Internal Use Only Calculator Using this feature allows you to use your device as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication, and division. You can also use this as a scientific calculator. 1. From the Home screen, tap
(Apps) Calendar With this feature, you can consult the calendar by day, week, or month, create events, and set an alarm to act as a reminder. Google Calendar is built into the phone and synchronizes both new and existing entries between your phone and your online Google account.
(Calculator). 2. Enter the first number using the numeric keys. 3. Enter the operation for your calculation by tapping the Plus, Minus, Multiplication, or Division key. 4. Enter the next number. 5. To view the result, tap the = (equals) key. 6. Repeat steps 1 to 4 as many times as required. Note: Place the screen in Landscape mode to reveal additional scientific functions. Important! You should previously add an account (Facebook, Microsoft Exchange ActiveSync, or Google) prior to using the Calendar. 1. From the Home screen, tap
(Apps)
(Calendar). The following tabs are available on the right side of the display:
Year: displays the Year view.
Month: displays the Month view.
Week: displays the Week view.
Day: displays the Day view.
List: displays the events in a List view.
Task: allows you to search for tasks. 138 DRAFT Internal Use Only 2. Press and then use the Search field to search for key word terms based on an available category from the adjacent dorp down list. Choose from: All, Event, Task, or Sticker. 3. Tap
(Create event) to create a new Calendar event. or Tap Today to display the current date indicated by a blue box, then press following options:
Go to: displays a specific date.
Delete: allows you to delete All events, All events before today, and select one of the or an individual event.
Search: allows you to search within your current events.
Calendars: provides quick access to your All calendars page. select the type of general synchronization settings you want. A check mark indicates selection.
Settings: displays a list of configurable settings. Creating a Calendar Event 1. From the Home screen, tap
(Apps)
(Calendar). 2. Within the Year, Month, Week, and Day tabs,
(Create event) to create a new Calendar event. Calendar Settings Using the Calendar settings you can select the day with which you want the calendar to begin. You also select how you want to view the calendar, by Month, Week, or Day or determine how to manage events, notifications, sounds, and defaults reminders. 1. From the Home screen, tap 2. Press 3. Tap View styles and select an option. Settings.
(Apps)
.
Tap Month view styles and select an option.
Tap Week view and select a type. 4. Tap First day of week and select either Locale default, Saturday, Sunday or Monday. 5. Tap Hide declined events to activate this option. A check mark indicates selection. Applications and Development 139 DRAFT Internal Use Only 6. Tap Lock time zone (to lock event time based on your current user-selected time zone). Select a time zone from within the Select time zone field. 7. Tap Show week number to display the week numbers along the side of the week entries. 8. Tap Set alerts and notifications to adjust the event notification method. Choose from: Alert, Status bar notification, and Off. 9. Tap Select ringtone to assign a ringtone to a calendar Camera Use your 5 megapixel camera feature to produce photos in a JPEG format. The Camcorder shoots High Definition video in an MP4 format. Note: A microSD card is no longer necessary before you take pictures or shoot video. It is recommended that you confirm your default storage location for images and videos. event notification. From the Home screen, tap
(Apps) 10. Tap Vibration to assign a vibration notification to this
(Camera). event. 11. Tap Quick responses to edit your default quick responses for outbound emails. These are default responses similar to those used by text templates. For more information, refer to Using the Camera on page 118. 140 DRAFT Internal Use Only Chrome The Google Chrome app allows you to use the Google Chrome Web browser on your device. 1. From the Home screen, tap
(Apps)
(Chrome). 2. Read the Google Chrome Terms of Service and tap 3. Accept and Continue. If you have an existing Chrome account, tap Sign in to bring your open tabs, bookmarks, and omnibox data from your computer to your phone, otherwise tap No thanks. 4. Follow the on-screen instructions to use Google Chrome. Clock Here you can set an Alarm, configure and view the World clock, use a Stopwatch, set a Timer, or use a Desk Clock. The applications display in a tabular format and quickly accessed with the touch of a finger. From the Home screen, tap
(Apps)
(Clock). Setting an Alarm 1. From the Home screen, tap
(Apps)
(Clock).
(Create alarm). 2. From the Alarm tab, tap 3. Use the arrow symbols to enter adjust the hour, and minutes, then tap AM or PM (toggles depending on which was last selected). 4. Tap the Alarm repeat field and touch the number of times you want this alarm to repeat. Selections are:
day blocks or Repeat weekly. Selected day blocks turn blue when active. 5. Tap the Alarm type field and select one of the following:
Melody, Vibration, Vibration and melody, or Briefing. Applications and Development 141 DRAFT Internal Use Only 6. Tap More to configure additional alarm settings such as
Interval indicates the length of time the alarm will remain silent volume slider, Alarm tone, Location alarm, Snooze, Smart alarm, and assign a name. To configure additional alarm settings:
1. Tap More to access additional alarm settings. 2. Tap the Alarm tone field and either select an available tone or select Add to use locate a sound to use as an alarm ringtone. Tap OK to activate the ringtone. 3. Slide the slider bar left or right in the Alarm volume field to decrease or increase the alarm volume. A sample of the volume level plays. 4. Move the Location alarm slider to the right to activate the feature, then follow the on-screen instructions to enter a location. When activated, the alarm only sounds when you are at a specific location. 5. Move the Snooze slider to the right to activate the feature. Tap the field to assign a Interval time
(3 minutes, 5 minutes, 10 minutes, 15 minutes, or 30 minutes) and Repeat (1 time, 2 times, 3 times, 5 times, and 10 times). 142 between alarm notifications (snooze time).
Repeat indicates the numbers of snooze sessions that are assigned to this alarm. How many times will the snooze silence the alarm. 6. Move the Smart alarm slider to the right to activate this feature which slowly increases screen brightness and the volume of nature tones to simulate dawn breaking. Tap the field to assign a interval time (1 minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes, or 30 minutes) and nature tone (Fairy fountain, Birdsong by the lake, Sparkling mist, The secret forest, Serenity, or Gentle spring rain).
Interval category describes the length of time the alarm will remain silent between alarm notifications (snooze time).
Tone category provides one of several nature sounds that are used as the alarm tone. 7. Tap the Name field and enter a name for this Alarm. 8. Tap Save to store the new alarm event. DRAFT Internal Use Only Turning Off an Alarm To stop an alarm when it sounds, touch and slide to any direction. Setting the Snooze Feature To activate the Snooze feature after an alarm sounds, to any direction. Snooze must touch and slide first be set in the alarm settings. Deleting an Existing Alarm 1. From within the Clock application, touch and hold an on-screen alarm event. 2. Tap Delete. World Clock This feature allows you to find out what time it is another part of world. 1. From within the Clock application, tap the World clock tab. 2. Tap Add city then scroll and select the desired city, or tap in the search field to locate a city. To assign DST settings:
1. Locate a desired city from the World clock list. 2. Touch and hold a city and select DST settings. 3. Select a DST setting (Automatic, Off, or 1 hour). If Daylight Savings Time is selected, a sun symbol appears next to the World Clock city listing. Stopwatch This feature allows you to capture elapsed time while letting the stopwatch keep running. 1. From within the Clock application, tap Stopwatch tab. 2. Tap Start to start the stopwatch counter. 3. Tap Lap to begin the lap time counter. 4. Tap Stop to stop the counter. 5. Tap Restart to restart the lap counter. You can have multiple lap times. 6. Tap Reset to reset the counter. Applications and Development 143 DRAFT Internal Use Only Setting a Timer 1. From within the Clock application, tap Timer tab. 2. Tap the Hours, Minutes, or Seconds field and use the on-screen keypad to enter the hour, minute, or seconds. The timer plays an alarm at the end of the countdown. 3. Tap Start to start the timer. 4. Tap Stop to stop the timer or Reset to reset the timer and start over. 5. Tap Restart to resume the timer counter. Configuring a Desk Clock This feature lets you activate an on-screen clock that can be viewed when the device is docked. 1. From within the Clock application, tap Desk clock tab. The default Desk clock is displayed. Note: You might have to scroll across the tabs to locate the Desk clock tab at the far right. 2. To make changes, press and then tap Settings. The following options are displayed while in full-screen mode:
Calendar: when this is checked, the calendar is displayed. Tap to uncheck.
Weather: when this is activated, the location, temperature, and weather condition is displayed. Touch and slide the slider to the right to turn it on.
Dock: allows you to set your Dock settings such as Dock sound, Audio output mode, and Desk home screen display. For more information, refer to Accessory on page 256. 3. Tap 4. To make changes in full screen mode, press to display the Desk clock in full-screen mode. and then tap:
Edit shortcuts: allows you to edit the shortcuts shown at the bottom of full screen mode.
Hide/Show shortcuts: allows you to hide or view the current on-screen shortcuts located along the bottom of the full screen mode. 144 DRAFT Internal Use Only Settings: provides access to the Desk clock settings menu from where you can alter the following: Hide status bar, Wallpaper, Calendar, Weather, and Dock.
Date and time: provides access to the Date and time menu. Contacts The default storage location for saving phone numbers to your Contacts List is your phones built-in memory. From the Home screen, tap
(Apps)
(Contacts). For more information, refer to Contacts List on page 74. Downloads Provides quick access to tabs containing a list of your current downloaded files (Internet and Other). 1. From the Home screen, tap
(Apps)
(Downloads). 2. Place a check mark on an available file to select it. 3. Choose an available action such as Share, Delete, Sort by size/date, or Clear list. Dropbox Works to provide access to your desktop files directly from your device. This applications allows you to bring your files with you when you're on the go, edit files in your Dropbox from your device, upload photos and videos to Dropbox, and share your selected files freely with family and friends. The in-device application works in conjunction with a partner program placed on a target computer using an active Internet connection. Dropbox creates a folder that automatically synchronizes its contents across all of your connected devices on your account. Update a file to your Dropbox on your computer, and its automatically updated to the same folder on your other devices. Download the Desktop application 1. Use your computers browser to navigate to:
http://www.dropbox.com/. 2. Follow the on-screen setup and installation instructions on your target computer containing the desired files. Applications and Development 145 DRAFT Internal Use Only Important! The computer application must be installed on the computer containing the desired files. This computer must have an active Internet connection. 4. Initially, you will need to configure your Camera Upload parameters. Choose from Wi-Fi only or Wi-Fi or data plan.
Tap Turn on Camera Upload after making your selection. Note: It might be necessary to configure your routers firewall Caution! Enabling this feature can incur data charges settings to allow this application to gain access to the Internet.
(depending on your plan) if the Wi-FI or data plan is selected. Accessing Dropbox on your Device 1. From the Home screen, tap
(Apps)
(Dropbox) Start. 2. Tap Sign in, enter your current account credentials, and tap Sign in. or Tap Sign up for Dropbox and follow the on-screen instructions to register for a new account. 3. Follow the on-screen instructions. 5. Tap
(Access Dropbox) at the top of the application window to access the files and folders you area currently sharing from your computer. 6. Tap an item to open it. 7. Tap the bottom of the image to reveal additional options:
Delete to erase the current file.
Share via applications such as: Copy link, Bluetooth, Email, Gmail, Google, Google+, Hangouts, Memo, Messaging, or Wi-Fi Direct. 146 DRAFT Internal Use Only More to choose from options such as:
Open with... to open the current file with the default in-device Manually uploading a Picture to Dropbox 1. From the Home screen, tap
(Apps) application. Export to transfer the current file to another location via:
Save to SD card, Bluetooth, Email, Gmail, Google+, Group Play, Hangouts, Messaging, Picasa, or Wi-Fi Direct. 8. Tap
(Up a Directory Level) at the top of the application window to navigate up a single level with every tap. 9. Tap
(Camera Uploads/Albums) at the top of the application window to access your Uploads and Albums tabs. 10. Tap
(Tag as Favorite) at the top of the application window to assign favorite files.
(Camera). 2. After the image is taken, tap the Image Viewer box at the bottom right. This previews the current image. 3. Tap the image to reveal the image options at the top of the screen. 4. Tap
(Add to Dropbox) select a folder location and tap Upload. Note: If your share folder is located on your computer, you will momentarily receive an on-screen popup notifying you that a new image was uploaded to your shared Dropbox folder. Email Email enables you to review and create email using most email services. The device alerts you when you receive an email message. From the Home screen, tap
(Apps)
(Email). For more information, refer to Using Email on page 106. Applications and Development 147 DRAFT Internal Use Only Gallery The Gallery is where you view photos and play back videos. For photos, you can also perform basic editing tasks, view a slideshow, set photos as wallpaper or caller image, and share as a picture message. From the Home screen, tap
(Apps)
(Gallery). For more information, refer to The Gallery on page 134. Gmail Google Mail (Gmail) is a web-based email service. Gmail is configured when you first set up your phone. Depending on your synchronization settings, Gmail can automatically synchronize with your Gmail account on the Web. Signing into Google Mail 1. From the Home screen, tap
(Gmail). Note: You must sign in to your Gmail account in order to access features such as Google Mail and Play Store. 2. Tap New if you do not have a Google account. or Tap Existing if you have a Google account. The Inbox loads conversations and email. Opening Gmail 1. From the Home screen, tap 2. Tap an existing email message.
(Gmail). Refreshing Gmail Mail From within the Gmail message list, tap
(Refresh) at the bottom of the screen to refresh the screen, send and receive new emails, and synchronize your email with the Gmail account. 148 DRAFT Internal Use Only Other Gmail Options 1. From the main Gmail screen, tap
(Labels) at the bottom of the screen to set up and manage Labels for your Gmail messages. 2. From the main Gmail screen, tap
(Search) at the bottom of the screen to search through your Gmail messages. Composing a Gmail Message 1. From the Home screen, tap 2. From the Gmail Inbox, tap
(Gmail).
(Compose) at the bottom of the screen to create a new message. 3. Enter the recipients Email address in the To field. Tip: Separate multiple recipient email addresses with a comma. 4. Press and select Add Cc/Bcc to add a carbon or blind copy. 5. Enter the subject of this message in the Subject field. 6. Tap the Compose email field and begin composing your message. 7. Once complete tap
(Send). Viewing a Gmail Message 1. From the Gmail Inbox, tap a message to view the
: archives the selected Email. following options located at the bottom of the screen:
Archive
Delete
Labels
Mark as Unread
: deletes the currently selected Email.
: assigns a label to the current Email.
: tags the current message as unread and returns you to the Google Mail Inbox.
Newer: swiping to the right displays newer Emails.
Older: swiping to the left displays older Emails. Applications and Development 149 DRAFT Internal Use Only Retrieving your Google Account Password A Google account password is required for Google applications. If you misplace or forget your Google Account password, follow these instructions to retrieve it:
1. From your computer, use an Internet browser and navigate to http://google.com/accounts. 2. Click on the Cant access your account? link. 3. Follow the on-screen password recovery procedure. Google Use Google Search to search the Web. From the Home screen, tap
(Apps)
(Google) and enter the search text. or Tap information. on the Google Search bar and say the search 2. Press to select one of the following additional options:
Mark important/Mark not important: assigns the current email an important status.
Mute: mutes the conversation.
Report spam: reports the Email message as spam.
Report phishing: reports the Email message as a phishing email attempt.
Settings: allows you to configure the General, or Notification settings.
Send feedback: sends feedback to Google.
Help: launches the browser and displays Google Mobile Help information. Creating an Additional Gmail Account 1. From the Home screen, tap 2. Press and then tap Settings ADD ACCOUNT and
(Gmail). follow the same steps as referenced in the previous section. For more information, refer to Signing into Google Mail on page 148. 150 DRAFT Internal Use Only Google Settings As Google has become more intertwined with other applications, this menu provides a quick and ready access point to configure preferences for Google+, Maps & Latitude, Location, etc.. You can also use the Search function to initiate a Google Search from this menu. 1. From the Home screen, tap
(Apps)
(Google Settings) and select an on-screen option. 2. Tap one of the following options: Apps with Google+
Sign in, Google+, Play Games, Location, Maps &
Latitude, Search, Ads, and Android Device Manager. 3. Follow the on-screen prompts. Google +
Google+ makes messaging and sharing with your friends a lot easier. You can set up Circles of friends, visit the Stream to get updates from your Circles, use Messenger for fast messaging with everyone in your Circles, or use Instant Upload to automatically upload videos and photos to your own private album on Google+. 1. Sign on to your Google account. For more information, refer to Gmail on page 148. 2. From the Home screen, tap
(Apps)
(Google+). 3. Select the account you want to use to sign in to Google+. or Tap Add account to create another account. 4. Follow the on-screen instructions to use Google+. Visit www.google.com/mobile/+/ for more information. Applications and Development 151 DRAFT Internal Use Only Group Play This application lets you share documents, photos or music in real-time with other connected friends. Note: Group play is not the same as Screen mirroring which requires a connection to a Wi-Fi capable Samsung TV or via the use of the AllShare Cast Hub. For more information, refer to AllShare Cast Hub on page 134. Important! To share a Group Play, all users must be connected to the same Wi-Fi access point. 1. From the Home screen, tap
(Apps)
(Group Play). 2. Read the on-screen information and tap Agree to continue. 3. Follow the on-screen tutorials. 152 Creating a group If you have media you want to share, create a group for other users to join to and then share/collaborate with what you are sharing. The creator of the group is the leader and it the source of the shared file. All other joined members can then interact with the file being shared. 1. Connect to an active Wireless Access Point and confirm your other participants are also connected to this same Wi-Fi. 2. From the Home screen, tap
(Apps)
(Group Play). 3. Tap the Set group password field to enable the function which requires users to enter a password prior to connecting to your new group. 4. Tap Create group. If previously selected, enter your group password and tap OK. Mobile AP is enabled. 5. Tap one of the media items listed under the Share and play content heading. 6. Tap to select the items you want to share (indicated by a check mark), then tap Done or OK. DRAFT Internal Use Only 7. Have your friends sign onto Group Play from their devices (see below) and they can view your media using you as a Mobile AP. Joining a group A joiner is the participant of an already created group. You can only view and interact with media shared by the leader of an existing group. 1. Connect to an active Wireless Access Point and confirm your connection is this same Wi-Fi as the group leader. 2. From the Home screen, tap
(Apps)
(Group Play). 3. Tap Join group. Your device then scans for available groups for you to join. 4. Select a group to join. Once connected, you can then select the shared content and interact with your groups shared media. 5. Press and select Help for additional information. Hangouts Previously known as Google Talk, is an updated place to hangout, share photos, and even video calls. This is a free web-based application for instant messaging offered by Google. Conversation logs are automatically saved to a Chats area in your Gmail account. This allows you to search a chat log and store them in your Gmail accounts. Note: Before using this application, you must first have an active Gmail account available and be currently logged in. 1. From the Home screen, tap
(Hangouts). Note: If you are not already logged into Google, refer to the instructions for signing in on page 148. 2. When prompted, read the on-screen information and confirm your phone number is correct before using the application. Tap Confirm. Note: Confirming your phone number does not make it publicly available. Applications and Development 153 DRAFT Internal Use Only Help Provides access to built-in Help information. 1. From the Home screen, tap
(Apps)
(Help). 2. Select an on-screen topics for more information:
New features: provides help on all of the new features and applications such as Smart screen and Group Play.
Basics: provides basic information on using your device such as Keys, Lock screen, Notifications, Home screen, Keyboard, Phone, Messaging, and Update your device.
Settings: provides information on settings for Wi-Fi, Bluetooth, Ringtone, Power saving mode, NFC, and Screen Mirroring.
Applications: provides information on how to use basic applications like Contacts, Email, Internet, Camera, etc. Internet Open the browser to start surfing the Web. The browser is fully optimized and comes with advanced functionality to enhance the Internet browsing feature on your device. Your device is equipped with a Google browser to navigate the mobile Web. This section explains how to navigate the browser and use the basic features. Accessing the Internet To access the Browser:
From the Home screen, tap
(Apps)
(Internet). Navigating with the Browser 1. Tap an entry to select an item. 2. Sweep the screen with your finger in an up or down motion to scroll through a website. 3. To return to a previous page, tap 4. To move forward to a Web page, tap
. 154 DRAFT Internal Use Only Browser Options 1. From the top of the browser screen, select one of the available options:
Navigation: use the forward and back buttons to navigate through your browsing activity.
Refresh: reloads the current page.
Windows: displays a list of the windows you have open.
Bookmarks: provides access to the Bookmarks screen. or From the home page, press following options:
New window: launches a new browser window. By default, to access the this screen shows the home page.
Add bookmark: allows you to add a URL to your bookmark list.
Add shortcut: allows you to add a shortcut to your Home screen.
Save page: allows you to store the current page in memory so that it can be read later even if you loose your Internet connection. It is saved in your Saved pages folder.
Share via: allows you to share the page using Add to Dropbox, Bluetooth, Email, Gmail, Google, Google+, Hangouts, Memo, Messaging, or Wi-Fi Direct.
Find on page: allows you to search in the current page.
Incognito mode: pages viewed in incognito mode wont appear within your browser history or search history, and no traces (such as cookies) are left on your device. For more information, refer to Going Incognito on page 157.
Saved pages: contains web pages you have saved using the Save page option.
History: provides access to your History screen.
Desktop view: allows you to assign the browser to display the current page in the desktop view (to closely mimic the display as it would appear on a Desktop computer).
Brightness: allows you to assign a brightness level specifically for the browser window. This is independent of the brightness assigned within the devices Settings menu.
Print: provides print access on compatible Samsung printers.
Settings: allows you to change the way you view your web pages by changing these options. Applications and Development 155 DRAFT Internal Use Only Help: allows you view additional information concerning the Internet application Adding and Deleting Windows To add a new window:
Entering a URL You can access a website quickly by entering the URL. Websites are optimized for viewing on your phone. To enter a URL and go to a particular website:
Tap the URL field at the top of the screen, enter the URL and tap
. Search the Internet To perform an Internet search using keywords:
1. From within the Google search application, tap the Google search field, enter the keyword(s) to search using the on-screen keypad. 2. Tap the entry from the list of search results that are displayed. 3. Tap a link to view the website. 1. From your browser window, tap
(Window)
(New window). 2. A new browser window displays. Note: The number of currently open windows is displayed at the bottom of the Windows screen. 3. Scroll across the screen to view the currently active windows and tap an entry to launch the selected Internet window. To delete an existing window:
1. From your browser window, tap 2. Scroll across the available windows and locate your
(Windows). target window. 3. Tap next to the listing to delete the window. 156 DRAFT Internal Use Only Going Incognito The incognito feature allows you to view Internet sites outside of the normal browsing. Pages viewed in this incognito window wont appear within your browser history or search history, and no traces (such as cookies) are left on your device. Note: Any downloaded files will be preserved and will stay on your device after you exit the incognito mode. To add a new incognito window:
1. From your browser window, press and select Incognito mode. 2. At the information prompt, tap OK. 3. A new browser window displays. To exit from the incognito window:
1. From your browser window, tap
(Windows). 2. Scroll across the available windows and locate the incognito window. The incognito icon the upper-left of the new browser window while you are in this mode. appears in 3. Tap next to the incognito listing to delete this window. Using Bookmarks While navigating a website, you can bookmark a site to quickly and easily access it at a future time. The URLs
(website addresses) of the bookmarked sites display in the Bookmarks page. From the Bookmarks page you can also view your Most visited websites and view your History. 1. From the webpage, tap
(Bookmarks). The Bookmarks page displays. 2. Press to display the following options:
List/Thumbnail view: Select Thumbnail view (default) to view a thumbnail of the webpage with the name listed, or select List view to view a list of the bookmarks with Name and URL listed. Applications and Development 157 DRAFT Internal Use Only Adding Bookmarks 1. From the webpage, tap 2. Use the on-screen keypad to enter the name of the
(Add bookmark). bookmark and the URL. 3. Select a storage location for your new bookmark. 4. Update the title of the Bookmark and confirm the URL. 5. Tap Save. The new save page now appears on the Bookmarks page. Editing Bookmarks 1. From the Bookmarks page, touch and hold the bookmark you want to edit. 2. Tap Edit bookmark. 3. Use the on-screen keypad to edit the name of the bookmark or the URL. 4. Tap the Address field to assign a new folder location. 5. Tap Save or Cancel to exit the operation.
Create folder: Creates a new folder in which to store new bookmarks.
Delete: Erases selected bookmarks.
Change order: Rearranges the current bookmarks.
Move to folder: Selected bookmarks are moved to a selected folder. 3. Tap a bookmark to view the webpage, or touch and hold a bookmark for the following options:
Open in new window: Opens the webpage in a new window.
Edit bookmark: Allows you to edit the name or URL of the bookmark.
Add shortcut: Adds a shortcut to the bookmarked webpage to your phones Home screen.
Share link: Allows you to share a URL address via Add to Dropbox, Bluetooth, Email, Gmail, Google, Google+, Hangouts, Memo, Messaging, or Wi-Fi Direct.
Delete bookmark: Allows you to delete a bookmark. For more information, refer to Deleting Bookmarks on page 159.
Set as homepage: Sets the bookmark to your new homepage. 158 DRAFT Internal Use Only Deleting Bookmarks 1. From the Bookmarks page, touch and hold the bookmark you want to delete. 2. Tap Delete bookmark. 3. At the confirmation window, tap OK. Emptying the Cookies A cookie is a small file placed on your phone by a website during navigation. In addition to containing some site-specific information, a cookie can also contain some personal information (such as a username and password) which might pose a security risk if not properly managed. You can clear these cookies from your device at any time. and then tap 1. From an active Web page, press Settings Privacy Delete personal data. 2. Tap Cookies and site data to create a check mark. 3. Tap Done. Using Web History The History list displays a list of the most recently viewed websites. These entries can be used to return to previously unmarked web pages. 1. From an active Web page, press and then tap History. 2. Select a visited range category. Choose from: Today, Last 7 days, or Most visited. 3. Tap an entry to display the webpage. or Press current History list. and then tap Clear history to delete the Saved Pages The Saved pages list provides you with a list of the websites that you have saved. 1. From an active Web page, press and then tap Saved pages. A list of your saved webpages is displayed with their Name. The webpages that have been visited the most will appear at the top. 2. Tap any entry to display the webpage. Applications and Development 159 DRAFT Internal Use Only Browser Settings To configure browser settings:
1. From the Home screen, tap
(Apps)
(Internet). 2. Press 3. Choose an option from the following categories:
and then tap Settings. Basics:
Set home page: Sets the current home page for the Web browser.
Auto-fill forms: Allows you to set the text used for the Web form auto-fill feature. Privacy:
Search and Web address suggestions: displays predictions of related queries and popular websites in the address bar as you type.
Preload available links before opening: allows you improve performance when loading pages.
Remember form data: Allows the device to store data from any previously filled out forms. Remove the check mark to disable this function. 160
Remember passwords: Stores usernames and passwords for visited sites. Remove the check mark to disable this function.
Delete personal data: allows you to delete all personal data such as Browsing history, Cache, Cookies and site data, Passwords, Auto-fill data, and Location access. Accessibility:
Text scaling: allows you to preview the text size, scale the text size using a slider bar, set the zoom amount on double tap, and minimize the font size using a slider bar.
Force zoom: allows you to override the websites request to control zoom.
Text encoding: adjusts the current text encoding.
Full screen: allows you to use Fullscreen mode to hide the status bar.
Text booster: allows you to boost the text size on PC websites to make it easier to read. DRAFT Internal Use Only Content settings:
Accept cookies: Allows sites, that require cookies, to save and read cookies from your device. Bandwidth management:
Preload webpages: Allows the browser to preload Web pages. Choose from Always, Only on Wi-Fi, or Never.
Turn on location: Allows websites to request access to your
Load images: Allows web page images to load along with the location. other text components of a loaded website.
Turn on JavaScript: Enables Javascript for the current Web
Open pages in overview: Displays an overview of newly page. Without this feature, some pages may not display properly. Remove the check mark to disable this function.
Block pop-ups: Prevents popup advertisement or windows from appearing on-screen. Remove the check mark to disable this function.
Default storage: Allows you to set your default storage to Device or Memory Card.
Website settings: View advanced settings for individual websites.
Turn on notifications: Allows website notifications. Select Always on, On demand, or Off. opened web pages. Isis Wallet This device utilizes NFC (Near Field Communication) technology to send out payment information during the checkout process. The internal microSIM card acts to both store, protect, and manage your wallet information. This application organizes payment cards, offers and loyalty cards in one location. Note: Prior to using the application, verify you have enabled your NFC functionality.
Clear notifications: Deletes website notification access Turn on NFC:
information.
Reset settings: Restores all settings to default. 1. From the main Settings page, tap Connections tab. 2. Tap the NFC field and verify the feature is active
(indicated by ONON
). Applications and Development 161 DRAFT Internal Use Only Launch the Isis Wallet application:
1. From the Home screen, tap
(Apps)
(Isis Wallet). 2. Follow the on-screen instructions. Local Local (formerly known as Google Places) displays company logos on a layer of Google Maps. When viewing an area you can quickly locate a business or person, find out more information about the business, see coupons, public responses, and more. 1. From the Home screen, tap
(Apps)
(Local). 2. Tap
(Search) and then use the Search Maps field to manually enter a desired place or choose from among the various categories. Matches are filtered by those closest to your current location. 5. Press and then tap Add a search. The functions adds additional search shortcuts to the places screen. Lookout Security Lookout Security provides mobile device-specific security features that are coupled with a minimal performance hit. Lookout Mobile Security provides key security options that are unique to the mobile market. Along with the antivirus and anti-malware tech, there's a lost and stolen phone locator service, an application privacy adviser, and a backup service. 1. From the Home screen, tap
(Apps)
(Lookout Security). 2. Tap Get started. 3. Read the on-screen descriptions and activate those desired features. Tap Next to progress to the next screen. 4. Sign in as either a New user or Existing user and follow 3. Locate and tap one of the listed places (Restaurants, the remaining set up process. Cafes, Bars, Attractions, [user added searches], RECOMMENDATIONS, or IN THIS AREA a list of places within this category displays. 4. Tap the Maps icon to launch the related maps feature. 162 DRAFT Internal Use Only Maps Google Maps allow you to track your current location, view real-time traffic issues, and view detailed destination directions. There is also a search tool included to help you locate places of interest or a specific address. You can view locations on a vector or aerial map, or you can view locations at the street level. Important! Before using Google Maps you must have an active data (3G/4G/LTE) or Wi-Fi connection. The Maps application does not cover every country or city. From the Home screen, tap
(Apps)
(Maps). Important! For best results, it is recommended that you enable all of your location services. For more information, refer to Location Services on page 273. Enabling a Location source Before you use Google Maps and find your location or search for places of interest, you must enable a location source. To enable the location source you must enable the wireless network, or enable the GPS satellites. Important! The more location determining functions are enabled, the more accurate the determination will be of your position. 1. From the main Settings page, tap More tab Location services. 2. Tap Use GPS satellites to enable the GPS satellite. 3. Tap Use wireless networks to allow apps to use data from sources such as Wi-Fi and mobile networks to provide a better approximation of your current location. 4. Tap My places to enable the storage of your favorite locations. Applications and Development 163 DRAFT Internal Use Only To receive better GPS signals, avoid using your device in the following conditions:
inside a building or between buildings
in a tunnel or underground passage
in poor weather
around high-voltage or electromagnetic fields
in a vehicle with tinted windows Opening Maps 1. From the Home screen, tap
(Apps)
(Maps). 2. Tap the upper-right My location button to find your location on the map with a blinking blue dot. 3. Locate the bottom row of the buttons to access additional options:
Search: allows you to search for a place of interest.
Directions: displays navigation directions to a location from a starting point. 164
Local: provides access to the places menu where you can quickly locate a business or person, find out more information about a business, see coupons, public responses, and more
(Local). Locate and tap one of the listed places (Restaurants, Cafes, Bars, Attractions, or select from available categories such as Entertainment, ATMs, Gas stations, Hotels, Post office, or Taxi.)
Layers: allows you to switch map views:
Traffic: (available only in selected areas) Real-time traffic conditions are displayed over roads as color-coded lines. Each color represents how fast the traffic is moving. Satellite: Maps uses the same satellite data as Google Earth. Satellite images are not real-time. Google Earth acquires the best imagery available, most of which is approximately one to three years old. Terrain: combines a topographical view of the areas terrain with the current map location. Transit Lines: displays the overlapping transit lines on your map. Latitude: allows you to see your friend's locations and share your location with them. DRAFT Internal Use Only My Maps: displays a list of your preferred maps. Bicycling: displays the overlapping cycling trails on your map. Wikipedia: displays any Wikipedia markers and info on your map. 4. Press and select one of the following options:
Clear Map: allows you to remove all markings and layers from the map.
Make available offline: allows you to store map-related information locally on your device and access it even when the device is offline.
Settings: allows you to select the following additional options:
Display: allows you to enable/disable the Zoom Buttons, Scale Bar, and Bubble action. Offline and cache: allows you to set options to pre-fetch map tiles when not using Wi-Fi and to clear the cache that holds the map tiles. Choose from: Automatic caching, Clear all map titles, or Clear My Places cache. Location settings: lets you access and configure the location settings. Sign in: allows you to sign into your current Google account. Labs: this is a testing ground for experimental features that arent ready for primetime. They may change, break or disappear at any time. Click on a Lab to enable or disable it. Whats New: provides access to the Play Store from where you can update the application manually. About: displays general information about Google maps such as Version, Platform, Locale, Total data sent, Total data received, Free memory, etc. Feedback: allows you to provide application feedback. Terms, Privacy & Notices: displays the Terms and Conditions, Privacy Policy, or Legal Notices information. Select the desired information from the pop-up menu.
Help: provides help information. Applications and Development 165 DRAFT Internal Use Only Media Hub Samsung Media Hub is your one stop for the hottest movie and TV content. With hundreds of titles available, entertaining your family on the go was never easier. You can rent or purchase your favorite content and watch from any location. Featuring the stunning viewing quality Samsung is known for, Samsung Media Hub is your gateway to mobile video like you've never experienced it before. You must have the Samsung Account application installed and registered prior to using Media Hub. Creating a New Media Hub Account Before you can rent or buy media, you must first create an account. Enter the required information. 1. Confirm you have already logged in to your Samsung account. 2. From the Home screen, tap
(Apps)
(Media Hub). Tip: In some cases it might be necessary to sign in via the application. Press Sign in. Note: Media Hub usage is based on service availability. 3. From the main page, press and then tap My page. Important! You must be using an active Wi-Fi/4G/LTE connection to preview and download a media file. The internal memory acts as a storage location for your downloaded rental or purchase. Important! The Samsung account manages the access information (username/password) to several applications, such as Music Hub and Media Hub. Note: Your Media Hub account is managed by the Samsung account application. This application manages your user profile information. 4. If not already signed in, use the keypad to enter the required information, then tap Create new account. Follow the on-screen instructions to complete your registration for a new Samsung account. 166 DRAFT Internal Use Only Using Media Hub 1. From the Home screen, tap
(Apps)
(Media Hub). 6. Choose a payment method and then follow the on-screen instructions. The media stores to the My media folder. 2. At the Media Hub screen, Whats New is displayed with recently added media that you can rent or purchase. Media Hub Notices
Any media item (Media Content) may be rented or purchased after 3. The following tabs are displayed at the top of the you create an account in Media Hub. screen:
Home: displays the Media Hub main screen.
Movies: displays movies that are available for rent or purchase. Scroll through the top navigation bar and select a movie category. The movies of that type will be displayed below.
TV Shows: displays TV shows that are available for purchase. Scroll through the top navigation bar and select a TV category. The TV shows of that type will be displayed below.
My media: allows you to view all of the media that you have purchased or rented. Tap a media entry to view it.
Media Content that is downloaded may be viewed concurrently on up to five (5) devices with Media Hub that are also registered to the same account.
You may choose to remove a device from your account no more than once every 90 days.
You may remove Media Content from a device as many times as youd like. You will have the ability to re-download the Media Content at a later point in time subject to content re-download availability and studio permissions.
You MUST be in network coverage to license Media Content you 4. Scroll through the media listings and tap on an item have acquired through the Service. you would like to purchase or rent. 5. Tap tap Buy or Rent.
You can use 3G, 4G, or Wi-Fi connectivity in order to download Media Content.
Unlike purchased Media Content, rented Media Content will be viewable on only 1 device in your account. Applications and Development 167 DRAFT Internal Use Only Media Content is downloaded and saved to internal memory. No SD Card included out of box.
Your Media Content may pause/stop or not download in networks where there is a weak signal.
You may begin watching downloaded Media Content as soon as a) license acquisition has occurred and b) sufficient amount of the Media Content has been buffered.
You must finish watching rented Media Content within 24 consecutive hours of start of playback. Stopping, pausing or restarting rented Media Content does not extend the available viewing time. Memo The Memo application allows you to create memos using the keypad, your finger, or both. You can add images, voice recordings, and text all in one place. Creating a New Memo 1. From the Home screen, tap
(Apps)
(Memo). The Memo screen is displayed. 2. Compose the memo. 3. Tap Save. If an initial message has already been created, tap create a new memo. to 168 DRAFT Internal Use Only Messaging This application allows you to use the Short Message Service
(SMS) to send and receive short text messages to and from other mobile phones. You can also use the Multi Media Service (MMS) to create multimedia messages to send and receive from other mobile phones. From the Home screen, tap
(Apps)
(Messaging). For more information, refer to Messaging on page 93. Messenger Messenger allows you to bring groups of friends together into a simple group conversation. When you get a new conversation in Messenger, Google+ sends an update to your device. 1. Sign on to your Google account. For more information, refer to Gmail on page 148. 2. From the Home screen, tap
(Apps)
(Messenger). or From the Google+ application, select Messenger. 3. Select the account you want to use to sign in to Google+. or Tap Add account to create another account. 4. When prompted, follow the on-screen procedures to configure the Sync contacts parameters. 5. When prompted, configure the photo backup parameters as desired and tap Done. 6. Tap from the upper-left of the screen and select from an available list of features such as: Find People, Communities, Hangouts, etc.. To create a new message:
1. Tap from the upper-left of the screen and select Messenger. 2. Tap 3. to start a new message. In the upper text field, enter a name, email address, or circle. In the bottom Type a message field, enter a message then tap
(Send). 4. Applications and Development 169 DRAFT Internal Use Only Mobile HotSpot Provides access to the Tethering and Mobile HotSpot menu where you can use either the USB tethering or portable HotSpot functionality. 1. From the Home screen, tap
(Apps)
(Mobile HotSpot). 2. Activate the desired connection method. For more information see either"USB Tethering"on page 210 or "Mobile HotSpot"on page 211. Music This application allows you to play music files that you have stored on your microSD card. You can also create playlists. The Music Player is an application that can play music files. The music player supports files with extensions AAC, AAC+, eAAC+, MP3, WMA, 3GP, MP4, and M4A. Launching the Music Player allows you to navigate through your music library, play songs, and create playlists (music files bigger than 300 KB are displayed). Playing Music 1. From the Home screen, tap
(Apps)
(Music). 2. Tap a library category tab to select the music category:
Songs, Playlists, Albums, Artists, Music square, or Folders. 3. Scroll through the list and tap an entry to begin playback. Note: The 5.1 channel sound effect works when earphones or sound is connected through the headset jack only. 170 DRAFT Internal Use Only 4. Use any of the following Music player controls:
Streams the current music file to another device via Samsung Link. Pause the song. Start the song after pausing. Press and hold to rewind the song. Tap to go to previous song. Press and hold to fast-forward the song. Tap to go to next song. Volume control and SoundAlive. Volume control showing volume muted. Plays the entire song list once. Replays the current list when the list ends. Repeats the currently playing song. Shuffles the current list of songs randomly. Songs play in order and are not shuffled. Lists the current playlist songs. Returns the user to the music category screen. Assign the current song as a Favorite. Making a Song a Phone Ringtone 1. From within the Music application, tap the Songs tab. 2. Touch and hold a song from the list to reveal the on-screen context menu. 3. Tap Set as Phone ringtone. Note: Additional Set as options include Caller ringtone and Alarm tone. Applications and Development 171 DRAFT Internal Use Only Music Options The Music settings menu allows you to set preferences for the music player such as whether you want the music to play in the background, sound effects, and how the music menu displays. With the application displayed and playing a song, and select one of the following options:
press
Via Bluetooth: scans for devices and pairs with a Bluetooth headset.
Play via Group Play: allows you to share music with others via the Group Play application. All users must be connected to the same Wi-Fi. For more information, refer to Group Play on page 152.
Add to playlist: allows you to add the current music file to a selected playlist.
Set as: allows you to set the current song as a Phone ringtone, Caller ringtone, or Alarm tone.
Scan for nearby devices: allows you to look for DLNA-compliant devices used to control streaming media
(when Wi-Fi is On).
Settings: allows you to change your music player settings. 172
Details: allows you to view media info such as Artist, Title, Album, Track length, Genre, Recording date, Track number, Format, Size, and Location.
End: closes the application. Music Settings The settings menu allows you to set preferences for the music player such as whether you want the music to play in the background, sound effects, and how the music menu displays. 1. From within the Music application, press Settings. 2. Select one of the following settings:
Music menu: this menu allows you to select which categories you want to display. Choices are: Albums, Artists, Genres, Music square, Folders, Composers, Years, Most played, Recently played, or Recently added. Tap each item that you want to display in the Music menu.
SoundAlive: set a type of equalization such as Normal, Pop, Rock, Dance, Jazz, Classic, etc.
Adapt Sound: enable or disable the adaptive sound feature to adjust to the sound levels of your current environment. DRAFT Internal Use Only Play speed: set the play speed anywhere between 0.5X and 2.0X using the slider.
Music auto off: when enabled, sets a timer for the Music application to automatically turn off after a pre-selected amount of time.
Lyrics: when activated, the lyrics of the song are displayed if available.
Voice control: when activated, allows you to use voice control commands to control the music player. Using Playlists Playlists are used to assign music files into groups for playback. These Playlists can be created using the Music player on this device, or using a third-party application (such as Windows Media Player) and downloading those files to an SD card inserted into the device. Creating a Playlist 1. From within the Music application, tap the Playlists tab. 2. Press 3. Backspace over the default playlist title and type a new and then tap Create playlist. name for this playlist, then tap OK. Applications and Development 173 DRAFT Internal Use Only Adding Music to a Playlist 1. From within the Music application, tap the Playlists tab. 2. Tap the playlist name in which to add music. 3. Tap
(Add music). This option is available within user-created playlists. Note: If a playlist is empty, add a song by touching a holding a song name from the main screen to open the context menu. Select Add to playlist and choose the playlist. 4. Tap a music file, or tap Select all to add all the music tracks to this playlist then tap Done. Removing Music from a Playlist 1. From within the Music application, tap the Playlists tab. 2. Tap the playlist name in which to delete music. 3. Touch and hold a song to reveal the on-screen context menu. 4. Tap Remove. 174 Editing a Playlist Besides adding and removing music files in a playlist, you can also share, delete, or rename the playlist. Note: Only those playlist you have created can be edited. Default playlists can not be renamed. 1. From within the Music application, tap the Playlists tab. 2. Touch and hold a playlist entry to reveal the on-screen context menu. 3. Tap Edit title. 4. Enter a new name for this playlist and tap OK. Transferring Music Files Music files can be downloaded to the phone using one of two methods:
1. Downloaded to the device from the Play Store. Music files are directly stored on your phone. 2. Downloaded to the phone via a direct USB connection. Music files are stored into a Music folder on the SD card. DRAFT Internal Use Only
This product uses the FCC Data API but is not endorsed or certified by the FCC