| submitted | available | document details (if available) | source link |
|---|---|---|---|
| June 11 2014 |
| various | Users Manual 1 | Users Manual | 3.27 MiB | / June 11 2014 |
Confidential FCC Approval Document for SM-G386T FCC ID : A3LSMG386T 9.User Manual SAMSUNG ELECTRONICS CO, LTD SM-G386T SM-G386T
- 1 -
- 1 -
2014.06.04 2014.06.04 4 G LT E S M A R T PH O N E User Manual Please read this manual before operating your device and keep it for future reference DRAFT Internal Use OnlyThis document is watermarked because certain important information in the document has not yet been verified. This document has been sent to you as a draft and for informational purposes only. The document should only be used for internal purposes and may not be distributed outside of Samsung, except to Samsung's carrier customer for testing purposes. Distributing the document outside of Samsung, except to Samsung's carrier customer for testing purposes could result in legal exposure to the company if the preliminary, unverified information in the draft turns out to be inaccurate. Warning! This product contains chemicals known to the State of California to cause cancer and reproductive toxicity. Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to
(the Phone System), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not
(and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers. Open Source Software Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open source licenses, please visit: http://opensource.samsung.com. Disclaimer of Warranties; Exclusion of Liability EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE;
THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS. Modification of Software SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES CAUSED BY YOUR EDITING OF REGISTRY SETTINGS, OR YOUR MODIFICATION OF OPERATING SYSTEM SOFTWARE. USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND APPLICATIONS TO WORK IMPROPERLY. YOUR CARRIER MAY NOT PERMIT USERS TO DOWNLOAD CERTAIN SOFTWARE, SUCH AS CUSTOM OS. SAFE (Samsung Approved For Enterprise) SAFE: "SAFE" (Samsung for Enterprise) is a mark for a Samsung device which has been tested against Samsung's own internal criteria for interoperability with certain third party securityrelated solutions for MDM and VPN. The testing includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. During the testing, the device is tested with the security solutions to see if the solutions work with the device as described by the third party security solution providers. The testing, for example, includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. For more information about Samsung's SAFE program, please refer to www.samsung.com/us/safe. Disclaimer of Warranties: EXCEPT AS OTHERWISE PROVIDED IN THEIR STANDARD END USER LICENSE AND WARRANTY, TO THE FULL EXTENT PERMITTED BY LAW SAMSUNG ELECTRONICS CO., LTD., SAMSUNG TELECOMMUNICATIONS AMERICA, LLC, AND THEIR AFFILIATES (COLLECTIVELY REFERRED TO HEREIN AS THE "SAMSUNG ENTITIES") EXPRESSLY DISCLAIM ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, INTEROPERABILITY OR NONINFRINGEMENT, WITH RESPECT TO INFORMATION TECHNOLOGY SECURITY PROTECTION, SAFE DEVICES AND APPLICATIONS TESTED WITH SAFE DEVICES. IN NO EVENT SHALL THE SAMSUNG ENTITIES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHATSOEVER WITH RESPECT TO INFORMATION TECHNOLOGY SECURITY PROTECTION, SAFE DEVICES OR APPLICATIONS TESTED WITH SAFE DEVICES. In addition, information technology security protection will be affected by features or functionality associated with, among other things the email platform, master data management, and virtual private network solutions selected by the software provider, solution provider or user. Choice of an email, master data management, and virtual private network solution is at the sole discretion of the software provider, solution provider or user and any associated effect on information technology security protection is solely the responsibility of the software provider, solution provider or user. For complete statement of limited warranty, please refer to www.samsung.com/us/safe, available on the web and where Samsung smartphone and Galaxy Tab devices are sold. [101212]
DRAFT Internal Use OnlyG368T_UM_English_ND6_PS_042314_D3 Samsung Telecommunications America (STA), LLC Headquarters:
1301 E. Lookout Drive Richardson, TX 75082 Customer Care Center:
1000 Klein Rd. Plano, TX 75074 Toll Free Tel: 1.888.987.HELP (4357) Internet Address: www.samsung.com 2014 Samsung Telecommunications America, LLC. Samsung is a registered trademark of Samsung Electronics Co., Ltd. Do you have questions about your Samsung Mobile Device?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at: www.samsung.com/us/support. The actual available capacity of the internal memory is less than the specified capacity because the operating system and default applications occupy part of the memory. The available capacity may change when you upgrade the device. Nuance, VSuite, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its affiliates in the United States and/or other countries. ACCESS and NetFront are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries. The Bluetooth word mark, figure mark (stylized B Design), and combination mark (Bluetooth word mark and B Design) are registered trademarks and are wholly owned by the Bluetooth SIG. microSD and the microSD logo are Trademarks of the SD Card Association. Openwave is a registered Trademark of Openwave, Inc. Google, the Google logo, Android, the Android logo, Google Play, Gmail, Google Mail, Google Maps, Google Music, Google Hangouts, Picasa, Play Nesstand, YouTube and other marks are trademarks of Google Inc. WiFi is a registered trademark of the Wireless Fidelity Alliance, Inc. LTE is a trademark of ETSI Swype and the Swype logos are trademarks of Swype, Inc. 2010 Swype, Inc. All rights reserved. Dynamic Noise Suppression from Audience Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise, intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard nearly anywhere. How Does It Work?
Based on the intelligence of the human hearing system, the technology:
Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with. Then isolates the primary voice in conversation and filters out the background noise so the person you're calling hears only your voice, without disturbing background noise. Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome surrounding noise. The noise suppression technology is builtin and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice clarity with every call. Legal Information The online version of the Health/Safety and Warranty guide for your device can be found at:
English: www.samsung.com/us/Legal/Phone_HSGuide Spanish: www.samsung.com/us/Legal/Phone_HSGuide_SP Location of Legal Information on the Device:
Health and Safety Information Settings g About device g Legal information g Samsung legal g Health and safety Warranty Settings g About device g Legal information g Samsung legal g Warranty EULA Settings g About device g Legal information g Samsung legal g END USER LICENSE AGREEMENT DRAFT Internal Use Only Table of Contents Intellectual Property .............................................................................2 Disclaimer of Warranties; Exclusion of Liability .............................2 Samsung Telecommunications America (STA), LLC ....................3 Legal Information ..................................................................................3 Section 1: Getting Started...............................................................6 Understanding this User Manual ......................................................6 Removing the Battery Cover ..............................................................6 Installing and Removing the SIM card .............................................6 Installing the microSD Memory Card ...............................................7 Installing the Battery ............................................................................7 Replacing the Battery Cover ..............................................................8 Charging the Battery ............................................................................8 Extending Your Battery Life ................................................................9 Switching the Device On or Off .........................................................9 Initial Device Configuration .................................................................9 Restarting the Device...........................................................................9 Locking and Unlocking the Device ............................................... 10 Voicemail .............................................................................................. 10 Section 2: Understanding Your Device ......................................11 Features of Your Device ................................................................... 11 Front View ............................................................................................ 11 Back View ............................................................................................ 12 Status Bar ............................................................................................ 13 Home Screen ...................................................................................... 15 Customizing the Screens ................................................................. 16 Screen Navigation ............................................................................. 18 Menu Navigation ................................................................................ 18 Entering Text ....................................................................................... 18 Using the Google Voice Typing ...................................................... 19 Using the Samsung Keyboard ........................................................ 19 Section 3: Call Functions and Contacts List.............................21 Displaying Your Phone Number ..................................................... 21 Making a Call ...................................................................................... 21 Ending a Call ....................................................................................... 21 Making Emergency Calls ................................................................. 21 Dialing Options ................................................................................... 22 Answering a Call ................................................................................ 22 Managing Reject Calls ...................................................................... 22 International Calls .............................................................................. 23 Pause Dialing ...................................................................................... 23 Wait Dialing .......................................................................................... 23 Redialing the Last Number .............................................................. 23 Speed Dialing ..................................................................................... 23 In Call Options .................................................................................... 24 Logs Tab .............................................................................................. 26 Section 4: Contacts ........................................................................28 Accounts .............................................................................................. 28 Contacts List ....................................................................................... 28 4 Finding a Contact .............................................................................. 29 Contacts Screen Options ................................................................ 30 Contacts Settings .............................................................................. 30 Contact Entry Options ...................................................................... 31 Linking Contact Information ............................................................ 31 Sending a Namecard ........................................................................ 32 Copying Contact Information .......................................................... 32 Synchronizing Contacts ................................................................... 32 Display Options .................................................................................. 33 Additional Contact Options ............................................................. 33 Groups .................................................................................................. 33 The Favorites Tab ............................................................................... 34 Section 5: Messages ......................................................................35 Types of Messages ............................................................................ 35 Creating and Sending Messages................................................... 35 Message Options ............................................................................. 36 Viewing Newly Received Messages .............................................. 36 Deleting Messages ............................................................................ 37 Message Search ................................................................................ 37 Messages Settings ............................................................................ 37 Assigning Messages as Spam ....................................................... 38 Accessing Your Spam Folder ......................................................... 39 Quick Responses .............................................................................. 39 Using Email ......................................................................................... 39 Microsoft Exchange Email (Outlook) ............................................ 41 Section 6: Multimedia .................................................................... 43 Assigning the Default Storage Location ....................................... 43 Using the Camera .............................................................................. 43 Camera Options ................................................................................. 43 Camera and Camcorder Settings .................................................. 44 Using the Camcorder ........................................................................ 45 Sharing Pictures ................................................................................. 46 Editing a Photo ................................................................................... 47 The Gallery .......................................................................................... 47 Section 7: Applications and Development ................................48 Applications ......................................................................................... 48 Amazon ................................................................................................ 48 Calculator ............................................................................................ 48 Calendar .............................................................................................. 49 Camera ................................................................................................. 49 ChatON ................................................................................................. 49 Chrome ................................................................................................. 50 Clock ..................................................................................................... 50 Contacts ............................................................................................... 51 Drive ...................................................................................................... 51 Dropbox................................................................................................ 51 Email ..................................................................................................... 52 Flipboard .............................................................................................. 52 Gallery .................................................................................................. 52 Gmail ..................................................................................................... 52 Google .................................................................................................. 52 Google Settings ................................................................................. 52 Google + .............................................................................................. 52 Hangouts .............................................................................................. 53 Internet ................................................................................................. 53 Lookout Security ................................................................................ 55 Maps ..................................................................................................... 55 Memo .................................................................................................... 56 Messages ............................................................................................ 56 Mobile HotSpot .................................................................................. 56 Music .................................................................................................... 56 Using Playlists .................................................................................... 57 My Files ................................................................................................ 58 Phone .................................................................................................... 58 Photos ................................................................................................... 58 Play Books ........................................................................................... 58 Play Games ......................................................................................... 58 Play Movies & TV ............................................................................... 58 Play Music ........................................................................................... 58 Play Newsstand .................................................................................. 59 Play Store ............................................................................................ 59 Samsung Apps ................................................................................... 59 Settings ................................................................................................ 59 TMobile My Account ........................................................................ 60 TMobile Name ID .............................................................................. 60 TMobile TV ......................................................................................... 60 Video ..................................................................................................... 60 Visual Voicemail ................................................................................. 61 Voice Recorder................................................................................... 61 Voice Search....................................................................................... 61 YouTube ............................................................................................... 61 Section 8: Connections ..................................................................65 Accessing Device Storage .............................................................. 65 WiFi Connections ............................................................................. 65 Bluetooth Connection ....................................................................... 66 USB Tethering .................................................................................... 67 Mobile HotSpot .................................................................................. 67 Section 9: Changing Your Settings ............................................ 69 Accessing the Settings Options ..................................................... 69 WiFi Settings ...................................................................................... 69 Download booster ............................................................................. 70 Bluetooth .............................................................................................. 71 Mobile HotSpot .................................................................................. 71 Airplane Mode .................................................................................... 71 Data Usage .......................................................................................... 72 Location ............................................................................................... 72 DRAFT Internal Use Only More Networks ................................................................................... 72 Near Field Communication .............................................................. 75 Nearby Devices .................................................................................. 75 Printing ................................................................................................. 75 Screen Mirroring ................................................................................ 75 Sound Settings ................................................................................... 76 Display Settings ................................................................................. 77 Wallpaper ............................................................................................. 77 Lock Screen ........................................................................................ 77 Notification panel ............................................................................... 79 Toolbox ................................................................................................. 79 Easy Mode ........................................................................................... 79 Accessibility ........................................................................................ 79 Blocking Mode ................................................................................... 80 Private Mode ....................................................................................... 80 Motions and Gestures ...................................................................... 80 Cloud .................................................................................................... 81 Backup and Reset ............................................................................. 81 Backing up Your Data Before Factory Reset .............................. 82 Language and Input .......................................................................... 83 Date and Time .................................................................................... 85 Safety assistance ............................................................................... 85 Accessories......................................................................................... 85 Battery Usage ..................................................................................... 85 Power saving mode ........................................................................... 85 SD Card & Device Storage .............................................................. 86 Security ................................................................................................ 86 Help ....................................................................................................... 87 About Device ....................................................................................... 87 Application Manager ......................................................................... 88 Default applications ........................................................................... 89 Calendar .............................................................................................. 89 Call Settings ........................................................................................ 89 Contacts Settings .............................................................................. 92 Email Settings ..................................................................................... 92 Gallery Settings .................................................................................. 92 Internet Settings ................................................................................. 92 Messages Settings ............................................................................ 93 S Voice Settings ................................................................................. 93 Section 10: Index .............................................................................94 5 DRAFT Internal Use Only Section 1: Getting Started This section explains how to get started with your phone by installing and charging the battery, installing the micro SIM card and optional memory card, and setting up your voice mail. Removing the Battery Cover The battery, micro SIM card and SD card are installed under the battery cover. Before using your device for the first time, youll need to install and charge the battery and install the micro SIM card. The micro SIM card is loaded with your subscription details, such as your PIN, available optional services, and many other features. If desired, you can also install an SD card to store media for use with your device. Understanding this User Manual The sections of this manual generally follow the features of your device. This manual provides navigation instructions according to the default display settings. If you select other settings, navigation may be different. Unless otherwise specified, all instructions in this manual assume you are starting from the Home screen and using the available keys. Note: Instructions in this manual are based on default settings, and may vary from your device, depending on the software version on your device, and any changes to the devices Settings. Unless stated otherwise, instructions in this User Manual start with the device unlocked, at the Home screen. All screen images in this manual are simulated. Actual displays may vary, depending on the software version of your device and any changes to the devices Settings. Special Text Throughout this manual, youll find text that is set apart from the rest. These are intended to point out important information, share quick methods for activating features, to define terms, and more. The definitions for these methods are as follows:
Caution!: Brings to your attention information that should be noted to avoid danger or mistakes. Important!: Points out important information about the current feature that could affect performance. Notes: Presents alternative options for the current feature, menu, or submenu. Tips: Provides quick or innovative methods, or useful shortcuts. Warning!: Brings to your attention important information to prevent loss of data or functionality, or even prevent damage to your phone. Text Conventions This manual provides condensed information about how to use your phone. To make this possible, the following text conventions are used to represent oftenused steps:
Important! Before removing or replacing the battery cover, make sure the device is switched off. To turn the device off, hold down the displays, then tap Power off. Power/Lock key until the Device options pop up Caution! Do not bend or twist the back cover excessively during installation or removal. Doing so may damage the cover. To remove the battery cover:
Hold the device firmly and locate the cover release latch (1) and carefully remove the cover off the device (2). Release Latch Installing and Removing the SIM card This device uses a different type of SIM card called a micro SIM. Other larger SIM cards will not function or fit within this slot. SIM Card Overview Important! Before removing or replacing the micro SIM card, make sure the device is switched off. To turn the phone off, hold down the displays, then tap Power off. Power/Lock key until the Device options pop up g Arrows are used to represent the sequence of selecting successive options in longer, or repetitive, procedures. The micro SIM card is loaded with your subscription details such as your telephone number, PIN, available optional services, and many other features. Example: From the Home screen, tap Apps g Settings g Bluetooth. Important! The micro SIM card and its information can be easily damaged by scratching or bending, so be careful when handling, inserting, or removing the card. Keep all SIM cards out of reach of small children. Some features on your device (such as WiFi Calling) can be unlocked by using the new micro SIM card. To use this new micro SIM card, call or contact customer service for more information. This card contains the necessary information for identifying and authenticating the user to the IMS (IP Multimedia Subsystem). 6 DRAFT Internal Use Only To install the SIM card:
1. Carefully slide the micro SIM card into the SIM card socket until it clicks into place. Micro SIM Card 2. Make sure that the cards gold contacts face into the device and that the upperleft angled corner of the card is positioned as shown. To remove the micro SIM card:
1. Remove the battery cover. 2. Carefully place your fingernail into the end of the micro SIM slot and push the card slightly out. 3. Carefully slide the card out of the micro SIM card socket. Note: If the card is not inserted correctly, the device will not detect it and no service will be available. If this happens, turn off the device, remove the card, and reinstall the card in the correct orientation. Installing the microSD Memory Card Your device supports an optional (external) microSD memory cards for storage of media such as music, pictures, video and other files. The SD card is designed for use with this mobile device and other devices. Note: This device supports an expandable memory card. 1. Remove the battery cover. 2. Locate the microSD card slot on the inside of the device. 3. Orient the card with the gold strips facing down. 4. Carefully slide the microSD card into the card socket until it clicks into place. Important! Be sure to align the gold contact pins on the card with the devices contact pins. To remove the microSD Memory Card:
1. Remove the battery cover. 2. Firmly press the card into the slot and release it. The card should pop partially out of the slot. 3. Remove the card from the slot. 4. Replace the battery cover. Installing the Battery Before using your device for the first time, install the battery and charge it fully. Important! Before removing or replacing the battery, make sure the device is switched off. To turn the device off, hold down the displays, then tap Power off. Power/Lock key until the Device options pop up To install the battery:
1. Slide the battery into the compartment (1) so that the tabs on the end align with the slots at the bottom of the phone, making sure the connectors align. 2. Gently press down to secure the battery (2). To remove the battery:
Grip the battery at the top end and lift it up and out of the battery compartment. Note: MicroSD cards should be formatted within the Storage menu. Using an older or slow microSD card can affect camera performance, especially for video recording. Installing Battery Section 1: Getting Started 7 DRAFT Internal Use Only Replacing the Battery Cover Position the battery cover over the battery compartment and securely press down around the edges until you Important! It is recommended you fully charge the battery before using your device for the first time. hear clicking. Caution! When replacing the battery cover, do not apply pressure to the screen (squeeze) as this can damage Note: If the charger is incorrectly connected, damage to the accessory port will occur therefore voiding the the screen. devices warranty. Charging the Battery Your device is powered by a rechargeable Liion battery. A wall charger, which is used for charging the battery, is included with your device. Use only approved batteries and chargers. Ask your local Samsung dealer for further details. Before using your device for the first time, you must fully charge the battery. Charging Head To connect a USB cable to the device:
1. Connect the USB cable to the charging head. 2. Locate the Charger/Accessory jack and iinsert the USB cable into the appropriate jack. USB Cable Note: Verify that the battery is installed prior to connecting the wall charger. If both the wall charger is connected and the battery is not installed, the handset will power cycle continuously and prevent proper operation. Failure to unplug the wall charger before you remove the battery, can cause the device to become damaged. 3. Plug the charging head into a standard AC power outlet. The device turns on with the screen locked and indicates both its charge state and percent of charge. Warning! While the device is charging, if the touch screen does not function due to an unstable power supply unplug the USB power adapter from the power outlet or unplug the USB cable from the device. 4. When charging is finished, first unplug the chargers power plug from the AC wall outlet, then disconnect the chargers connector from the device. 5. When charging is finished, first unplug the chargers power plug from the AC wall outlet, then disconnect the chargers connector from the phone. Important! If your handset has a touch screen display, please note that a touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty. 8 DRAFT Internal Use Only Extending Your Battery Life Active applications, light levels, Bluetooth usage, and GPS functionality all act to drain your battery. The following is a list of helpful tips that can help conserve your battery power:
Reduce the time your backlight stays on. Turn Bluetooth off when not in use. Turn WiFi off when not in use. Deactivate your GPS functionality when not needed. Most applications using this function will periodically Initial Device Configuration 1. Select a language from the associated field. English is the default language. Note: If you are visually impaired or have difficulty hearing, tap Accessibility to configure the accessibility settings. 2. Tap Start and follow the onscreen setup instructions. Note: You may be prompted with a notification that your activation is completed. Enabling Google location query the GPS satellites for your current location; each query drains your battery. services can drain battery power. Do not wait until your battery is completely depleted before charging your device. Repeating this process of a complete discharge and recharge can over time reduce the storage capacity of any battery. Use the Power Saving feature to deactivate some hardware and interface functions. Check the Battery use screen to review what features or functions have been consuming your battery resources. Check the Running Services and close any unnecessary applications. Use the Task Manager feature to end/shutdown background applications that are still running. These minimized applications can, over time, cause your device to slow down. Animated wallpapers use processing power, memory, and more power. Change your Live Wallpaper to a nonanimated Wallpaper gallery or Gallery image. Switching the Device On or Off Once the device has been configured, you will not be prompted with setup screens again. To turn the device on:
Press and hold Power/Lock until the device switches on. The device searches for your network and after finding it, you can make or receive calls. Note: The display language is preset to English at the factory. To change the language, use the Language menu. For more information, refer to Language and Input on page 83. To turn the device off:
1. Press and hold 2. Tap Power off. Power/Lock until the Device options screen appears. For more information, refer to Creating a Samsung Account on page 81. Note: Read the on-screen Dropbox set up and registration information regarding new services. 3. Enter a unique device name and tap Finish to complete the setup process. Important! The device name is also used to provide an identification for your devices Bluetooth and Wi-Fi Direct names. 4. Read the onscreen Collect diagnostics information. Note: This software collects only diagnostic data from your device so that customer service technicians can better troubleshoot issues with your device. 5. Select either More info... (to read additional information) or Close to close the message screen. Important! Selecting Close only closes the current description screen and does not disable data collection. To disable data collection, go to Settings g Backup and reset g Collect diagnostics and turn off the Allow Diagnostics feature. For more information, refer to Collect Diagnostics on page 83. Restarting the Device 1. Press and hold 2. Tap Restart. Power/Lock until the Device options screen appears. Section 1: Getting Started 9 DRAFT Internal Use Only Locking and Unlocking the Device By default, the device screen locks when the backlight turns off. Place your finger on the screen and swipe the glass in any of the directions shown unlock the device. Note: You can choose to configure lock settings to prevent unauthorized use of your device. For more information, refer to Security on page 86. Voicemail Setting Up Your Voicemail Your device automatically transfers all unanswered calls to voicemail, even if your device is in use or turned off. As soon as your battery is charged and the micro SIM card inserted, activate your voicemail account. Important! Always use a password to protect against unauthorized access. For new users, follow the instructions below to set up voicemail:
Note: Voicemail setup may be different depending on your network. 1. From the Home screen, tap Phone and then touch and hold the key until the device dials your voicemail service. You may be prompted to enter a password. 2. Follow the tutorial to create a password, a greeting, and a display name. Accessing Your Voicemail You can access your Voicemail by either pressing and holding Application icon, then tapping the Voicemail application. To access Voice Mail using the menu:
1. From the Home screen, tap Phone and then touch and hold on the keypad, or by using the devices until the device dials voicemail. Note: Touching and holding will launch the voicemail application. 2. When connected, follow the voice prompts from the voicemail center. Accessing Your Voicemail From Another Phone 1. Dial your wireless phone number. 2. When you hear your voicemail greeting, press the asterisk key on the phone you are using. 3. Enter your passcode. 10 DRAFT Internal Use Only Section 2: Understanding Your Device This section outlines key features of your device. It also describes the devices keys, screen and the icons that display when the device is in use. Features of Your Device Your device is lightweight, easytouse and offers many significant features. The following list outlines a few of the features included in your device. Touch screen with virtual (onscreen) QWERTY keyboard Brilliant 4.5 QHD screen (1920xxx x 1080xxxx??) Quadcore processor 4G LTE and High Speed Packet Access Plus (HSPA+). Android 4.4.2, Kit Kat OS Platform Galaxy Gear compliant. For a list of compatible smartphones, please visit:
www.samsung.com/us/galaxygearsupport. Smart Switch compliant. For more information, see www.samsungsmartswitch.com Support for Motions and Gestures. WiFi Capability @ both 2.4GHz and 5GHz Apps available to download from the Google Play Store and Samsung Apps 5 Megapixel Camera and Camcorder with autofocus with smart stabalization and LED flash. 2 Megapixel Front Facing camera for Video Chat SBeam file transfer technology NFCcompatible Bluetooth v4.0 enabled Full Integration of Google Mobile Services (Gmail, Google Maps, Google Hangouts, etc..) Multiple Messaging Options: Text/Picture/Video Messaging and Google Hangouts Corporate and Personal Email Music Player with multitasking features Preloaded ereader applications such as: Play Books and Play Newsstand Assisted GPS Navigation Expandable memory slot Mobile HotSpot and USB Tetheringcapability TMobile TV Video Chat via Google Hangouts Google Play Music WiFi Calling via the use of a micro SIM card Front View 7 16 1 2 3 4 5 15 14 13 12 11 10 9 6 7 8 1. Volume key allows you to adjust the ringer volume in standby mode (with the phone open) or adjust the voice volume during a call. When receiving an incoming call:
Pressing the volume key down mutes the ring tone. 2. Widgets are selfcontained onscreen applications (not shortcuts). These can be placed onto any of the available screens (Home or extended). 3. Application icons are shortcuts to your favorite applications on the Home screen. 4. Primary Shortcuts allow quick access to important features such as Phone, Contacts, Messages, Internet, and Apps. 5. Recent key displays a list of recently opened apps. Press and hold to access the Home screen options menu (page 15). Tap to go to the Task manager. Tap to delete the record of all recently used applications. 6. Home key displays the Home screen when pressed. Press and hold to launch Google search. Section 2: Understanding Your Device 11 DRAFT Internal Use Only 7. Microphones are used during phone calls and allow other callers to hear you clearly when you are speaking to them. There are two microphones on the device:
Bottom microphone: used during handset mode. Top microphone: used while an active call is in the speakerphone mode and assists in noise cancellation Back View
(2 microphone solution). 8. USB Power/Accessory connector allows you to connect a power cable or optional accessories such as a USB/data cable. 9. Back key redisplays the previous screen or clears entries. 10. Home screen indicator shows which Home screen is presently displayed. 11. Google Quick Search bar provides a shortcut to Google Search that allows you to search for items on the internet. 12. Power/Lock key ends a call or switches the phone off and on. Press and hold for two seconds to:
3 2 1 6 Access the audio modes for the device. Tap an onscreen selection (Mute, Vibrate, or Sound). Turn the device On or Off (
Emergency mode (
), activate/deactivate Airplane mode (
), or Restart the device (
).
). 4 5 1. Flash is used to take photos in lowlight conditions. 2. microSD Card Slot (internal) allows you use a microSD card to expand the memory of your device. 3. Camera lens is used to take photos. 4. micro SIM Card Slot (internal) Installation location for SIM card. 5. External speaker allows you to hear ringers, music, and other sounds offered by your phone. 6. Headset jack allows you to connect a handsfree headset so you can listen to music. Important! Emergency mode is primarily intended to be a battery saving mode that provides access to limited functionality. For Emergency functionality, including notification of emergency contacts with GPS location and images, see Safety assistance on page 85. 13. Indicator icons shows the information needed to operate your phone, such as the received signal strength, phone battery level, time, unread Emails, missed calls, etc. 14. Front Facing Camera allows you to take pictures while facing the screen and allows you to video conference. 15. Sensors lets you use the ambient light level to adjust the screen brightness/contrast. The Light Sensor decreases screen brightness in dim light. In a bright light condition (outdoors), the sensors cause the device to increase the brightness and contrast for better viewing. In dim light conditions, the device decreases the screen brightness to compensate. The Proximity Sensor detects how close an object is to the surface of the screen. This is typically used to detect when your face is pressed up against the screen, such as during a phone call. While talking on the phone, the sensor detects talk activity and locks the keypad to prevent accidental key presses. 16. Receiver allows you to hear the other caller. 12 DRAFT Internal Use Only Status Bar The Status Bar shows information about the connection status, signal strength, battery level, and time, and displays additional notifications information. This list identifies the icons you see on your devices display screen:
Indicator Icons This list identifies the symbols youll see on your devices display and Indicator area:
Note: Some Notification icons can be hidden manually by toggling the status of the Notification panel function. For more information, refer to Accessing Additional Screen Functions on page 15. Displays your current signal strength. The greater the number of bars, the stronger the signal. Indicates that the Airplane Mode is active. You cannot send or receive any calls or access online information. Indicates there is no signal available. Displays when there is no SIM card in the phone. Displays when there is a system error or alert. Displays to indicate a security warning. You are prompted to set a screen lock password. Displays when a call is in progress. Icon is displayed in the Status bar area. Displays when a call is on hold. Icon is displayed in the Status bar area. Displays when an active call is routed through a Bluetooth headset. Icon is displayed in the Status bar area. Displays when you have missed an incoming call. Displays when you device is set to automatically reject all incoming calls. The All numbers option is enabled from within Settings g Call g Call rejection g Auto reject mode menu. Displays when the speakerphone is on. Icon is displayed in the Status bar area. Displays when the microphone is muted. Icon is displayed in the Status bar area. Displays when Call forwarding is set to Always forward. Displayed in the Status bar when the current call is minimized. Displays your current battery charge level. Icon shown is fully charged. Displays when the current battery is 100 percent charged. When the battery is 100 percent, an icon will be shown at the top left of the screen. Displays your battery is currently charging. Displays your current battery charge level is very low (Charge: ~11% 5%). Shows your current battery only has up to 4% power remaining and will soon shutdown. (Charge: ~4% 1%). Displays when connected to the EDGE network. Displays when connected to the 3G network. Displays when connected to the HSPA+ network. Displays when your phone is communicating with the 4G LTE network. Displays when the Download Booster feature is enabled and communicating. Displays when the phone has detected an active USB connection and is in a USB Debugging mode. Displays when the phone has been enabled to use an active USB 3.0 connection. Displays when there is a new text message. Displays when an outgoing text message has failed to be delivered. Displays when an incoming text message content has failed to be downloaded. Displays when there is a new voicemail message. Displays when there is a new visual voicemail message. Displays in the notifications window when there is a new Email message. Displays in the notifications window when there is a new Gmail message. Displays when the user is prompted with a Lookout Security notification. Displays when the TMobile Name ID application did not recognize a recent number and would like to know whether you wish to Not add, or add as a New or Existing number. Displays when the time and date for a Calendar Event has arrived. For more information, refer to Calendar on page 49. Displays when an alarm is set. For more information, refer to Setting an Alarm on page 50. Displays when the device is in Silent mode. All sounds except media and alarms are silenced, and Silent mode is set to Vibrate. For more information, refer to Silent mode via Device Options Screen on page 76. Section 2: Understanding Your Device 13 DRAFT Internal Use Only Displays when the device is in Silent mode. All sounds are silenced, and Silent mode is set to Mute. Displays when data synchronization and application sync is active and synchronization is in progress for Gmail, Calendar, and Contacts. Displays in the notifications window when a new TMobile account information is available. Displays in the notifications window when there are too many onscreen notification icons to display. Tap to show more notifications. Displays when the Blocking mode feature is active. For more information, refer to Blocking Mode on page 80. Tap to select a text input method. Displays when Bluetooth technology is active and enabled. Displays when your devices GPS Location feature is on and communicating. Displays when the Bluetooth technology is active and communicating with an external device. Displays when the external SD card (internal microSD) has been disconnected
(unmounted) from the phone and is now ready for either removal or formatting. Displays when the an outbound file transfer is in progress. Displays when a file or application download is in progress. Displays when a screen capture has been taken and stored in the clipboard. Displays when your device is connected being used to control streaming media and is connected to a Digital Living Network Alliance (DLNA) certified devices. Displays when your device is currently sharing/streaming media to paired device using the Samsung Link application. Displays when updates are available for download. Displays when the External SD card is being prepared for mounting to the device. This is required for communication with the External SD card. Displays when the microSD card has been improperly or unexpectedly removed. Displays when storage within either the internal location or the external SD card has reached its capacity. It is recommended you either move files off or delete them to make additional room. Displays when the Power saving alert notification has been activated. You are then prompted to view your current battery level. Displays when Near Field Communication (NFC) has been activated. The Smart stay feature is activated. The screen stays on as long as you are looking at it. Displays when a Play Store download has completed. Displays when TTY device has been inserted. For more details on configuring your devices settings, see Section 9: Changing Your Settings on page 69. Displays when WiFi is connected, active, and communicating with a Wireless Access Point (WAP). Displays when WiFi is active and there is an available open wireless network. Displays when WiFi Direct is communicating with another compatible device. Displays to alert you to disable an active WiFi Direct connection if not in use to conserve battery power. Displays when the USB Tethering mode is active and communicating. For more information, refer to USB Tethering on page 67. Displays when WiFi is being used as a Mobile HotSpot feature is active and communicating. For more information, refer to Mobile HotSpot on page 67. Displays when the WiFi calling feature is active. Minutes used while connected to the WiFi network count against available rate plan minutes. Displays when the WiFi calling feature is active and you are using it with within your current active call. Displays when there is an error in the use or 911 registration of the WiFi Calling feature. 14 DRAFT Internal Use Only Notification Panel The Notification area indicates new message events (data sync status, new messages, calendar events, call status, etc). You can expand this area to display the Notification screen that provides more detailed information about the current onscreen notification icons. 1. Touch the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen (1) to open the Notifications panel. 2. Tap a notification entry to open the associated application (2). Home Screen The Home screen is the starting point for using the applications on your device. There are initially seven available panels, each populated with default shortcuts or applications. You can customize each of these panels. Home Screen Options In previous devices, pressing the hardware Menu key from the Home screen yielded on screen options. In this device those same options are now available by touching and holding an empty screen area. 1. Navigate to an available screen containing an open area. 2. Touch and hold an empty area. 3. Select an available home screen option from the Edit Home screen option page below:
Wallpapers allows you to assign the current wallpaper for the Home screen, Lock screen, or Home and lock screens. Widgets allows you to quickly access the Widget tab where you can then drag a selected widget to an available area on a selected screen. Home screen settings allows you to configure your Home screen to provide access to the My Magazines feature and enable/disable Transition effects. Remove tab allows you to add or remove extended screens from your device. You can have up to six extended screens (one Home screen and six Extended screens). Home Screen Delete Note: S Finder and Quick connect can quickly be accessed from the top area of the main Notifications screen. Clearing Notifications 1. In a single motion, touch and drag the Status bar down to the bottom of the screen to open the Notifications panel. 2. Tap Clear. The notifications are cleared from the panel. Accessing Additional Screen Functions In addition to notifications, this screen also provides quick and ready access to device functions. These can be quickly activated or deactivated. Scrolling across a horizontal list of functions has been enhanced with an accessible Grid view. Note: You can select the function buttons you see at the top of the Notifications panel. Only 5 buttons are shown at any one time. The Grid view is the only way to view all functions. To activate the Grid view:
From the Notification panel, tap To minimize the Grid view:
From the Notification panel, tap Open Grid view to display additional functions. Close Grid view to show only your primary functions. Section 2: Understanding Your Device 15 Wallpapers Widgets Home Screen Settings DRAFT Internal Use Only Customizing the Notifications Panel Adding and Deleting Screens To customize the panel via the Notifications area:
1. From the Notification screen, tap 2. Tap Edit then locate the Notifications panel area located at the bottom of the Notifications panel Open Grid view to display additional functions. Your device comes with up to seven screens. You can delete these screens and then add them back later. Note: These screens can be deleted and re-arranged. screen. 3. In a single motion, touch and hold a desired function then drag it to the ACTIVE BUTTONS area (those Important! Your device can only contain at most seven screens and at least one screen. buttons that appear in the Notifications area). To customize the panel via the Settings menu:
1. From the Home screen, tap 2. In a single motion, touch and hold a desired function then drag it to the ACTIVE BUTTONS area. Notification panel. Settings g Apps g Customizing the Screens You can customize the Home screens (panels) to display the Widgets, Shortcuts, Folders, or Wallpapers. For example, one screen could contain the My Magazine page, app shortcut and other forms of media, while another screen might contain communication apps such as Gmail. You can customize your Home screen by doing the following:
Customization of the Toolbox Adding, Deleting, and Rearranging screens Assigning a New Home screen Adding and Removing Primary Shortcuts Sharing Application Information Managing Shortcuts Adding and Removing Widgets Changing the Background (Wallpapers) Customizing the Toolbox For more information, refer to Toolbox on page 79. Activating the Toolbox feature displays an onscreen button that provides quick access to a set of five userdefined applications. Important! There can only be at most five applications assigned to the quick access Toolbox button. To activate the Toolbox feature:
1. From the Home screen, tap 2. In a single motion touch and slide the Toolbox slider to turn it on. To customize the Toolbox applications:
1. From the active Toolbox screen, tap Edit. 2. Place a check mark alongside up to five applications. These will be quickly accessible via the onscreen Settings g Toolbox. Apps g button. 3. Tap Save once you have completed the assignment of your applications. 16 To add a screen:
1. Navigate to an available screen containing an open area, then press and hold Recent until the Edit Home screen option page appears (page 15). 2. Scroll to the far right of the available screens and tap Add screen. The newly added screen appears as the last page. Home to return to the main Home screen. 3. Press To delete a screen:
1. Navigate to an available screen containing an open area, then press and hold screen option displays (page 15). Recent until the Edit Home 2. Scroll across the available screens, then drag the undesired screen up to the 3. Press Home to return to the main Home screen. Remove tab. Rearranging the Screens 1. Navigate to the Edit Home screen option page (page 15). 2. Touch and hold a screen and then drag it left or right into its new location. Left most is screen position #1 and the right most is screen is the last screen. Assigning a New Home Screen 1. Navigate to the Edit Home screen option page (page 15). 2. Tap to assign an existing screen as the new Home screen. The new Home screen is highlighted and indicates the Home screen icon at the top of the selected screen. Managing Shortcuts Note: To move a shortcut from one screen to another, you must carefully touch and hold the shortcut and slowly drag it to the edge of the screen. As the shortcut turns light blue, you can begin to move it to the adjacent screen.If this does not work, delete it from its current screen. Activate the new screen and then add the selected shortcut. To add a shortcut from the Applications screen:
1. From the Home screen, select a screen location for your new shortcut by scrolling across your available screens until you reach the desired one. 2. Tap Apps to reveal all your current available applications. By default, applications are displayed as an Alphabetical grid. 3. Scroll across the screens and locate your desired application. 4. Touch and hold the onscreen icon. The new shortcut then appears to hover over the current screen. 5. While still holding the onscreen icon, position it on the current screen. Once complete, release the screen to lock the shortcut into its new position. To delete a shortcut:
1. From the Home screen, touch and hold the desired shortcut. This unlocks it from its location on the current screen. 2. Drag the shortcut over the Remove tab and release it. DRAFT Internal Use Only Adding and Removing Primary Shortcuts Managing Wallpapers Note: You can change any of your primary shortcuts with the exception of the Apps shortcut. To remove a primary shortcut:
From the Home screen, touch and hold the primary shortcut you want to replace, then drag it to an empty space on any available screen. The primary shortcuts are now updated to show an empty slot. To insert a new primary shortcut:
1. From the Home screen, tap 2. Locate your desired application, then touch and hold the onscreen icon to position it in the desired primary shortcut location. The new primary shortcut will now appear on both the Home and Extended screens. Apps. Wallpapers consist of either Gallery images (user taken), Static Wallpaper gallery images (default wallpapers), or Live wallpapers (animated backgrounds). Note: Selecting animated Live wallpapers will require additional battery power. To change the current Home screen wallpaper:
1. Navigate to an available screen containing an open area. 2. Press and hold 3. Tap Wallpapers g Home screen. 4. Scroll across the available wallpaper images and select a Wallpaper type:
Recent to launch the Edit Home screen option page page. Tap More images to select from a user image stored in the camera image gallery, crop the image, and tap Adding and Removing Widgets Done. Widgets are selfcontained applications that can be placed on any screen. Unlike shortcuts, widgets appear as applications. To add a Widget:
1. Navigate to a target screen containing an available open area, then press and hold Recent until the Edit Home screen option appears (page 15). 2. Tap Widgets pages and then locate a desired Widget. 3. Touch and hold an available Widget until it detaches from the screen. 4. While still holding the Widget, scroll over the location of the available screen and let go of the Widget to place it in the desired location. To remove a Widget:
1. Touch and hold a Widget until it unlocks from the current screen. 2. Drag the widget over the Remove tab and release it. As you place the Widget into the remove/trash, both items turn red. This action doesnt delete the Widget, it just removes it from the current screen. To place a widget onto a different screen:
1. Touch and hold the widget until it becomes transparent. 2. Slowly drag it past the edge of the screen until the adjacent page appears highlighted and it then snaps onto the new page. 3. Drag the widget to its desired position on the new screen. 4. Repeat these steps to continue moving it to other screens. Tap a Live wallpaper to select from an available animated background, once done tap Set wallpaper. Note: Wallpapers supports the following image types: JPEG, PNG, GIF, BMP, and WBMP. To change Wallpapers from Settings Menu:
1. From the Home screen, tap Apps g 2. Choose from Home screen, Lock screen, or Home and lock screens. Settings g Wallpaper. Note: The Home and lock screens is an option that allows you to change both screens at the same time. 3. Select a wallpaper image and tap Done or Set wallpaper. For more information, refer to Managing Wallpapers on page 17. To change the current Lock screen wallpaper:
1. From the Home screen, tap Apps g 2. Select a wallpaper image and tap Done or Set wallpaper. Settings g Wallpaper g Lock screen. Section 2: Understanding Your Device 17 DRAFT Internal Use Only Screen Navigation Using the touch screen display and the keys, you can navigate the features of your device and enter characters. The following conventions are used in this manual to describe the navigation action in the procedures. Important! This device no longer uses a hardware menu button. This function has been moved to an on-screen Menu button. Navigating Through the Screens The following terms describe the most common hardware and onscreen actions. Press and hold: Pressing relates to use of the hardware keys and buttons to select or activate an item. For example: press the Navigation key to scroll through a menu. Some buttons and keys require you to press and hold them to activate a feature, for example, you press the Lock key to lock and unlock the device. Menu Navigation You can tailor the devices range of functions to fit your needs using both menus and applications. Menus, sub menus, and features are accessed by scrolling through the available onscreen menus. Your device defaults with seven screens. Navigating Through the Application Menus There are three default Application Menu screens available. As you add more applications from the Play Store, more screens are created to house these new apps. 1. From the Home screen, tap Apps. The first Application Menu screen displays. To close the Applications screen, press Home. 2. Sweep the screen to access the other menus. 3. Tap any of the onscreen icons to launch the associated application. Tap: Use a brief touch to select items on the display or to enter text on the virtual QWERTY keyboard. For Using Sub-Menus example: touch an Application icon to open the application. A light touch works best. Touch and hold: Touch and hold an icon or key to open the available options, or to access a popup menu. For example: touch and hold from the Home screen to access a menu of customization options. Flick: Move your finger in lighter, quicker strokes than swiping. This finger gesture is always used in a vertical motion, such as when flicking through contacts or a message list. Swipe or slide: Quickly drag your finger vertically or horizontally across the screen. This allows you to move the area of focus or to scroll through a list. For example: slide your finger left or right on the Home screen to scroll among the seven panels. Drag: Press and hold your finger with some pressure before you start to move it. Do not release your finger until you have reached the target position. Rotate: Automatically change the screen orientation from portrait to landscape by turning the device sideways. For example: rotate to landscape orientation when entering text, to provide a larger keyboard, or when viewing web content to minimize scrolling. Pinch: Pinch the screen using your thumb and forefinger to zoom out when viewing a picture or a Web page. (Move fingers inward to zoom out.) Spread: Spread the screen using your thumb and forefinger to zoom in when viewing a picture or a Web page. (Move fingers outward to zoom in.) Note: These screens can be re-arranged in any desired order. For more information, refer to Customizing the Screens on page 16. Motion Navigation and Activation: The device comes equipped with the ability to assign specific functions to certain device actions that are detected by both the accelerometer and gyroscope. Submenus are available from within most screen and applications. 1. From a screen with an available menu option, tap 2. Tap an available onscreen option. Menu. A submenu displays on the screen. Using Context Menus Context menus (also called popup menus) contain options that apply to a specific item on the screen. They function similarly to menu options that appear when you right click your mouse on your desktop computer. Touch and hold an item onscreen to open its context menu. Entering Text Your device comes equipped with an orientation detector that can tell if the phone is being held in an upright
(Portrait) or sideways (Landscape) orientation. This is useful when entering text. Your device also provides several onscreen keypad text entry options to make the task of text entry that much easier. Text Input Methods There are two text input methods available:
Google voice typing: provides a voice to text interface. Samsung keyboard (default): an onscreen QWERTY keyboard that can be used in both portrait and landscape orientation. The onscreen QWERTY keypad works the same in both portrait and landscape mode. Selecting the Text Input Method The Text Input Method can be assigned from within one of two locations:
Settings Menu:
From the Home screen, tap Settings g Apps g Language and input g Default and select an input method. Text Input field:
1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen to open the Notifications screen. Note: Motion must be enabled for this feature to be active. For more information, refer to Motions and 2. Tap Choose input method and select an available input method. Gestures on page 80. 18 DRAFT Internal Use Only Using the Google Voice Typing This feature uses Google voice recognition to convert your spoken words into onscreen text. You can use your voice to enter text using the Google Voice typing feature. 1. From the keyboard, touch the top of the screen and drag it down to display your notification panel. 2. Tap 3. At the Listening prompt Speak now, speak clearly and distinctly into the microphone. Choose input method g Google voice typing. The text is displayed in the message as you are speaking. For more detailed information on configuring Google Voice Typing settings, see Configure Google Voice Typing on page 84. 4. Tap Done when you are finished. Using the Samsung Keyboard This QWERTY keyboard can be used to enter text in either a Portrait or landscape orientation. The only difference between the two orientations are the sizes of the keys. From a screen where you enter text, rotate your phone counterclockwise to a landscape orientation. The onscreen QWERTY keyboard displays. The Samsung Keyboard This device has a builtin, QWERTY keypad (portrait mode) or keyboard (landscape mode). Using the QWERTY keypad/ keyboard, you can type letter, numbers, punctuation, and other characters. To use the Samsung keyboard you must first configure the settings to default to the Samsung keyboard. 1. From the Home screen, tap Language and input g Default g Settings g Apps g or Tap Resume to resume recognition. Samsung keyboard. or Note: The feature works best when you break your message down into smaller segments. Using Google Voice Typing 1. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen, then select removed and all subsequent input to done via the microphone as text to speech. Choose input method g Google voice typing. The virtual keyboard is then 2. Speak into the devices microphone and watch your text being entered onscreen. 3. If the text is incorrect, tap DELETE. From a screen where you can enter text, in a single motion, touch and drag the Status bar down to the bottom of the screen, then select Choose input method g Samsung keyboard. 2. The virtual keyboard is then assigned to the Samsung keyboard configuration for all subsequent text input. Shift key Text input field Input Mode Indicator Input Options/
Current Mode Send Delete Settings For more detailed information on configuring Samsung Keyboard settings, see Samsung Keyboard Settings on page 83. Section 2: Understanding Your Device 19 DRAFT Internal Use Only Entering Text using Different Input Options Using ABC Mode in Samsung Keyboard Although the default text input method with the Samsung keyboard is to use the onscreen keys you have other options. 1. From a screen where you can enter text, tap the text input field to reveal the onscreen keyboard. 2. Tap ABCABC to configure the keyboard for ABC mode. Once in this mode, the text input type shows Sym . Note: To access settings, touch and hold the Input Methods button
, then tap Settings then select it Note: After typing an initial uppercase character, the key changes to and all letters that follow are in from the available options. 1. From within an active message, tap the text input field to reveal the onscreen keyboard. 2. Tap Input Methods to use the default Voice typing input method to convert your spoken words to lower case. 3. Enter your text using the onscreen keyboard. If you make a mistake, tap to erase a single character. Touch and hold to erase an entire word. 4. Tap Send to deliver the message. Using Symbol/Numeric Mode Use the Symbol/Numeric Mode to add numbers, symbols, or emoticons. While in this mode, the text mode key displays ABCABC . 1. From a screen where you can enter text, tap the text input field to reveal the onscreen keyboard. Rotate the phone counterclockwise to a landscape orientation, if desired. 2. Tap Sym to configure the keyboard for Symbol mode. Once in this mode, the text input type shows ABCABC . 3. Tap a number, symbol, or emoticon character. 4. Tap ABCABC to return to ABC mode. To enter symbols:
1. Tap Sym to configure the keyboard for Symbol mode. 2. Tap the appropriate symbol key. or Tap 1/2 button to cycle through additional pages. The first number on this key indicates which page (1 or 2) of additional characters is active. onscreen text. or Touch and hold Voice to text: Launch the devices Google Voice typing application to covert spoken words into onscreen to select from other input methods such as:
text. Clipboard: Launch the devices clipboard area from where you can select a current clipboard item to place in your current message. Settings: Access the Samsung keyboard settings menu. Emoticons: Insert an available emoticon from among several different sets. Changing the Text Input Mode in Keyboard 1. From a screen where you can enter text, tap the text input field to reveal the onscreen keyboard. 2. With Samsung keyboard as your text entry method, select one of the following text mode options:
Abc ABCABC : to use alphabetic characters from the onscreen keyboard. In this mode, the text mode button displays Sym . Symbol/Numeric Sym : to enter numbers by pressing the numbers selecting them on the onscreen keyboard. In this mode, the text mode button displays ABCABC . There are up to 2 available pages of numeric symbols available by tapping 1/2 . Note: After typing an initial uppercase character, tap to toggle capitalization. All lowercase Displays when the next character is entered in lowercase. Initial Uppercase Displays when the first character of each word is entered as uppercase but all subsequent characters are lowercase. All Uppercase Displays when all characters will be entered as uppercase characters. By default, the first letter of a new entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space. 20 DRAFT Internal Use Only Section 3: Call Functions and Contacts List This section describes features and functionality associated with making or answering calls, and the Contacts list, which is used to store contact information. Displaying Your Phone Number Apps g About device g Status. Your phone From the Home screen, tap Settings g number displays in the My phone number field. Note: The devices Settings menu can also be activated by pressing g Settings. Home and then tapping Apps Making a Call You can store phone numbers that are regularly used to the SIM card or to the devices memory. These entries are referred to as the Contacts list. 1. From the Home screen, tap 2. Enter the phone number and then tap 3. If you make a mistake while dialing, tap Delete to clear the last digit. Phone. Call. or Touch and hold Delete to clear the entire sequence. Note: When you activate the Auto redial option from within the Menu g Settings g Call g Additional settings menu, the device automatically redials up to 10 times when the person does not answer the call or is already on the phone, provided your call is not sent to voicemail. Phone g Ending a Call Briefly tap End Call to end the call. Note: To redial a recent number, tap Call at the end of the call or locate the number from the Logs list, tap the entry and tap Call. Ending a Call from the Status Bar 1. From an active call, you can launch a separate application or return to the Home screen. The current call is kept active in the background. 2. Tap the Status bar to reveal the Notifications tab, and then drag the tab to the bottom of the screen to open the Notifications panel. 3. Tap End to end the currently active call. Making Emergency Calls If you do not have a SIM card installed the first time you turn on the phone, the Insert SIM card to make calls message displays and an animated tutorial shows you how to install the SIM card. Without a SIM card, you can only make an emergency call with the phone; normal cell phone service is not available. Making an Emergency Call Without a SIM card installed 1. Tap Emergency call from the onscreen display to make an emergency call. 2. Enter 911 and tap Call. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End Call features. Note: If your screen goes black during your interaction with the device (launching Keypad, etc.), you might be Note: Selecting Location consent may drain battery power. accidentally swiping over the front sensors. Quick Dialing a Number from the Contacts List 3. Tap End call to exit this calling mode. 1. From the Home screen, tap 2. Locate a contact from the list and in a single motion, touch and drag your finger over the number by going Contacts. Apps g to the right. This action places a call to the recipient. Running a Call in the Background If you exit the current call screen and return to the Home screen, you are visually notified that you are still on an active call by the phone icon within the Status bar. This is the best way to stay on your current call and do something else (multitask) such as access the Contacts list, view a recent email, locate a picture, etc.. Tap the onscreen Reactivate Call button to return to the currently active call. In Call Notification Reactivate Call Section 3: Call Functions and Contacts List 21 DRAFT Internal Use Only Making an Emergency Call With a SIM card installed The Emergency calling mode makes redialing an emergency number a 1tap process. Before you can resume normal calling operations, you should first exit this mode. 1. Swipe the Lock screen to unlock the device. 2. From the Home screen, tap Phone. 3. Enter the emergency number (ex: 911) and then tap 4. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End Call. Call features. Note: This mode can drain your battery power more rapidly than a normal calling mode. 5. At the Emergency Callback screen, follow the onscreen instructions. Dialing Options When you enter numbers on the Keypad, you will see three onscreen options.
) to access your Voicemail service. From the keypad screen, use one of the following options:
Voicemail (
Call (
Delete (
To view additional dialing options:
After entering a number, tap
) to call the entered number.
) to delete digits from the current number. Menu. Answering a Call When somebody calls you, the device rings and displays the incoming call image. The caller's phone number, picture, or name if stored in Contacts List, then displays. Recent activity Answer the call Reject the call Respond with an outgoing message Add 2-sec pause: Insert a twosecond pause to enter a 2second delay within a number string (the phone continues dialing after 2 seconds without any additional keys being pressed. Pressing the Volume down button mutes the ringer. Tip: You can create pauses longer than two seconds by entering multiple 2 second pauses. Add wait: Insert a hard pause within the number string (the phone waits for your input). A wait requires that any consecutive numbers be manually sent by tapping Yes. Add to Contacts: Add the current number to either a new or existing Contacts entry. Send message: Send the current caller a text message while still maintaining the current call active. Speed dial: Access the Speed dialing setting menu where you can assign a speed dial location to a current Contacts entry. Settings: Provide you access to the Phone settings screen. Help: Available onscreen help regarding calling features. 22 If the incoming call is from a number stored in your Contacts, the entrys name is displayed. You may also see the callers phone number, if available. Managing Reject Calls This feature allows you to categorize both known and unknown callers as rejected contacts. These Contacts are then added to your Rejection list which can be managed for individual entries from within the Contacts list or as a whole from the Call rejection screen. 1. From the Home screen, tap 2. Tap 3. Tap the Auto reject mode field to configure your automatic rejection settings. Rejected calls are routed Menu and then tap Settings g Call g Call rejection. Phone. automatically to your voicemail. Choose from:
Off: Disables the auto rejection feature. All incoming calls: Enables the features for all known and unknown numbers, including those contacts that are not assigned to the rejection list. Auto reject numbers: Automatically rejects all entries assigned to the Reject list/Blacklist. DRAFT Internal Use Only Adding numbers to the rejection list Entries can be added to the list via either the Contacts menu or via the Auto reject list menu. The Contacts menu option assigns all numbers for an individual as rejected. The Auto reject list allows to assign individual numbers. To assign multiple numbers as rejected via Contacts:
1. From the Home screen, tap 2. Locate an entry and tap it to open the Contact Overview Screen (page 31). 3. Tap Menu g Add to reject list. All phone numbers associated with this entry are then added to the Contacts. Apps g reject list. To assign single number as rejected via Auto reject list:
1. From the main Call settings page, tap Call rejection g Auto reject list. 2. Tap 3. Tap Save to complete the assignment. Create and either enter the phone number or select a Contact from your Logs or Contacts list. International Calls 1. From the Home screen, tap onscreen. Phone and then touch and hold until the device shows +
2. Use the onscreen keypad to enter the country code, area code, and phone number. 3. If you make a mistake, tap Delete once to delete a single digit. or 4. Tap Delete to delete all digits. Touch and hold Call. Pause Dialing You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or financial phone numbers. 2-Second Pause: Automatically sends the next set of numbers after a twosecond pause. This is indicated in the number string as a comma (,). 1. From the Home screen, tap 2. Tap 3. Use the keypad to enter the additional numbers that will be dialed automatically after the second pause. Menu g Add 2-sec pause. This feature adds an automatic twosecond pause. Phone and use the onscreen keypad to enter the phone number. Wait Dialing Inserting a Wait into your dialing sequence means that the phone waits until it hears a dial tone before proceeding with the next sequence of numbers. Wait sends the next set of numbers only after tapping Yes. This is indicated in the number string as a semicolon (;). Note: Do not add multiple Waits (;) to a number string as this will continue to prompt you after each sequence. 1. From the Home screen, tap 2. Tap Menu g Add wait. This feature causes the phone to require your acceptance before sending the Phone and use the onscreen keypad to enter the phone number. next set of entered digits. 3. Tap 4. Once prompted to Send the following tones?, tap Yes to dial the remaining digits. Call. Redialing the Last Number The device stores the numbers of the calls youve dialed, received, or missed if the caller is identified. To recall any of these numbers:
1. From the Home screen, tap 2. Tap the 3. Tap the name/number and tap Logs tab to display the list of recent calls. Phone. Call. Speed Dialing Once you have stored phone numbers from your Contacts List, you can set up to 99 speed dial entries (2100) and then dial them easily whenever you want, simply by touching the associated numeric key. Note: Speed dial location #1 must be reserved for Voicemail use. Setting Up Speed Dial Entries Important! Speed dial location #1 is reserved for Voicemail. No other number can be assigned to this slot. 1. From the Home screen, tap 2. Tap Phone g Keypad tab. Menu g Speed dial. The Speed dial screen displays a virtual list of locations with the numbers Tip: You can create pauses longer than two seconds by entering multiple 2 second pauses. 2 through 100. 4. Tap Call. 3. Tap an unassigned number slot. 4. Tap a contact and select a number to assign it to the speed dial location. The selected contact number/
image is displayed in the speed dial number box. Removing a Speed Dial Entry 1. From the Speed dial screen, tap an entry and select Back to return to the previous screen. 2. Press Remove entry. Section 3: Call Functions and Contacts List 23 DRAFT Internal Use Only Changing a Speed Dial Entry Order Placing a Call on Hold 1. From the Speed dial screen, locate your desired slot. 2. Delete an existing entry and replace the now empty location with an existing Contacts entry. 3. Press Back to return to the previous screen. Making a Call Using Speed Dial You can place the current call on hold whenever you want. If your network supports this service, you can also make another call while a call is in progress. To place a call on hold:
1. From the currently active call, tap Menu g Hold to place the current call on hold. Menu g Resume call to activate the call that is on hold. 2. From the currently active call, tap To make a new call while a call is in progress:
1. From the currently active call, tap Add call to dial the second call. 2. Dial the new phone number and tap To switch between the two calls:
Tap the onscreen previous On hold number entry and select Swap Call. Swap Swap. The previous In call number turns gray and displays On hold. The new active call displays a green background behind the number. Turning the Speakerphone on and off While on a call, you can use your Speakerphone by following these steps:
1. Tap Speaker Speaker off to toggle the speakerphone on. 2. Tap Speaker Speaker on to toggle the speakerphone off. Tip: When the speaker is turned On, the color of the speaker is green. When the speaker is turned Off, the color of the speaker is white. Muting a Call 1. Tap 2. Tap Mute Mute Mute off to turn mute on so the other caller cannot hear you speaking. Mute on to turn mute off and resume your conversation. Switching to Bluetooth Headset 1. Pair the target Bluetooth headset prior to your call. 2. While on a call, switch to the Bluetooth headset instead of speaker by tapping Bluetooth Bluetooth headset off. 3. At the prompt, tap OK to enable Bluetooth if it is not already activated. 4. While on a call, switch back to the device speaker by tapping Bluetooth Bletooth headset on. You can assign a short cut number to a phone number in the Contacts List for speed dialing. 1. From the Home screen, tap 2. Touch and hold a previously created speed dial location (numbers 2100, or 1 if you are dialing voice Phone. mail) until the number begins to dial. 3. If you are not certain of the speed dial location, tap Phone g Keypad tab g Menu g Speed dial and scroll down the list to view the assigned phone number. In Call Options Your device provides a number of features that are available for use during a call. Dialer Adds a new call Activates or Deactivates speakerphone Mutes or Unmutes the call Active Call Menu Recent activity Ends the call Activates or Deactivates Bluetooth headset Note: Extra volume features are disabled while using Wi-Fi Calling. Personalizing the Call Sound Setting During a call it may be necessary to adjust the sound of the incoming call by selecting an audio equalizer setting for the current call. 1. From the currently active call, tap Menu g Personalize call sound. Note: If prompted to enable the feature via the Call settings menu, go to Settings g Call settings g Personalize call sound. 2. Select an available option. Choose from: Off, Soft sound, Clear sound, Adapt sound left, and Adapt sound right . 24 DRAFT Internal Use Only More In-call Options Having a Private Conversation With One Participant During a call you can save the current callers information to the Contacts list, or create a Memo. Tap Menu and then select an available incall option:
Hold: During a call you can place the caller on hold. Contacts: During a call you can look up a number in the Contacts list. Browse the Contacts list for the information you need. Memo: During a call it may be necessary to create a new memo via an available pop up screen. Messages: During a call you can create a message. Address and create the message. Review your message and tap Send. Personalize call sound: During a call it may be necessary to adjust the sound of the incoming call by selecting an audio equalizer setting for the current call. For more information, refer to Personalizing the Call Sound Setting on page 24. Extra volume: During a call it may be necessary to enable additional increases in the speaker volume. Settings: Provides quick access to the Phone settings screen. Multi-Party calls Making a Multi-Party Call Note: The Manage conference call option is not available for multi-party calls created while using the Wi-Fi Calling feature. You must be on the cellular network to use the manage feature. When you have two participants in a multiparty session, it might be necessary to place one of those participants on hold so that a private conversation can be held with a single caller. While you are in a multiparty call:
1. From within the merged call, tap Manage. 2. Tap Split Caller adjacent to the participants you would like to split from the current multiline call. The list displays the callers in the order they were dialed. Note: The Manage conference call option is not available for multi-party calls created while using the Wi-Fi Calling feature. You must be on the cellular network to use the manage feature. 3. Tap the participant to which you want to speak privately. You can now talk privately to that person while the other participants can continue to converse with each other. If there is only one other participant, that person is placed on hold. 4. To return to the multiparty call, tap the Merge icon. All of the multiparty call participants can now hear each other. Dropping One Participant 1. From within the merged call, tap Manage g End to the right of the number to drop. A multiparty call is a network service that multiple people to participate in a multiparty or conference call. The participant is disconnected and you can continue the call with the other participant. For further details about subscribing to this service, contact customer service. Setting up a Multi-Party Call 1. From the Home screen, tap 2. Dial the number for the first participant and tap 3. Once connected, tap Add call, enter the second phone number and tap Phone. Call. Call. The first caller is placed on hold. 4. Wait for the second caller to answer the incoming call, tap the onscreen previous On hold number entry and select Merge. The two calls are now joined into a multiparty call and display in the order in which they were called. Important! Multiple callers can be joined to a single multi-party line. Additional callers participate in a new Multiparty session and are held in conjunction with the previous multiparty call. You can swap or place each multi-party call on hold. 2. Tap End call to end your conversation with the remaining caller. Call Waiting You can answer an incoming call while you have a call in progress, if this service is supported by the network and you have previously set the Call waiting option to Activate. You are notified of an incoming call by a call waiting tone. To answer a new call while you have a call in progress:
1. In a single motion, touch and slide 2. Tap an option from the Accept call after menu:
in any direction to answer the new incoming call. Putting xxx on hold: Place the previous caller on hold while you answer the new incoming call. Ending call with xxx: End the previous call and answer the new call. Note: The new caller appears at the top of the list. The previous caller is placed on hold and appears at the bottom of the list. 3. Tap the onscreen previous On hold number entry and select Swap This places the new caller on hold and activates the previous call. Swap Swap to switch between the two calls. Important! The currently active call is displayed with a green background. 4. Tap Swap Swap Swap again to switch back. Section 3: Call Functions and Contacts List 25 DRAFT Internal Use Only Logs Tab The Logs tab is a list of the phone numbers (or Contacts entries) for calls you placed, accepted, or missed. The Logs tab makes redialing a number fast and easy. It is continually updated as your device automatically adds new numbers to the beginning of the list and removes the oldest entries from the bottom of the list. The Notification area of the Home screen (upper left) displays phone notifications, status, or alerts such as:
Displays when a call is in progress. Displays when a call was missed. Accessing the Logs Tab 1. From the Home screen, tap 2. Tap an entry to view available options. Phone g Logs tab. Note: The Logs tab only records calls that occur while the phone is turned on. If a call is received while it is turned off, it will not be included in your calling history. Each entry contains the phone number (if it is available) and Contacts entry name (if the number is in your Contacts). Call logs - Caller Overview Create Contact Contact Details Call Call History Delete Active Call Menu Send Message Indicates all outgoing calls made from your device. Indicates any received calls that were answered. Indicates a missed call. Indicates any received calls that were rejected. Indicates auto rejected calls. Note: You can also view missed calls from within the Notifications area. Select and tap the Missed call entry to open the Logs screen. 26 Tap a contact entry name or number to reveal the Call options screen:
1. 2. Tap Menu to reveal additional options:
Copy to dialing screen: Pass the current number to your dialer and then edit the selected number before you place your next outbound call. Send number: Send the current Contacts entry information to an external recipient. Add to reject list: Add the current phone number to an automatic rejection list. Similar to a block list, the selected caller will be blocked from making an incoming calls to your phone. Altering Numbers from the Logs List If you need to make a call from the Logs screen and you need to alter the number prior to dialing, you can add the appropriate prefix by prepending the number. 1. From the Home screen, tap Logs tab. 2. Open an entry to access the entryspecific context menu. 3. Tap Menu g Copy to dialing screen. Phone g Note: If prompted, select the Phone application to handle the action. 4. Edit the number using the onscreen keypad or delete digits by pressing Delete to erase the numbers. 5. Tap Call once the number has been changed. DRAFT Internal Use Only Erasing the Call logs List You can delete either an individual call log entry or all current entries from the Logs list. To clear a single entry from the list:
1. From the Home screen, tap Logs tab. 2. Select an entry and then tap Delete g Select all g Done. To clear all entries from the list:
1. From the Home screen, tap 2. Tap 3. Tap OK to continue with the erasure. Menu g Delete g Select all g Done. Phone g Phone g Logs tab. or Tap Cancel to stop the current process. Call Duration Logs tab. Phone g Menu g Call duration. 1. From the Home screen, tap 2. Tap 3. The following times are displayed for Voice and Data:
LAST CALL: Shows the length of time for the last call. DIALED CALLS: Shows the total length of time for all calls made. RECEIVED CALLS: Shows the total length of time for all calls received. ALL CALLS: Shows the total length of time for all calls made and received. 4. You may reset these times to zero by tapping Menu then selecting Reset. Section 3: Call Functions and Contacts List 27 DRAFT Internal Use Only Section 4: Contacts This section explains how to use and manage your Contacts List. You can save phone numbers to your devices memory. Accounts From the Accounts menu you decide if you want applications to synchronize, send, and receive data at any given time, or if you want the applications to synchronize automatically. After determining how you want the accounts to synchronize, indicate which account to synchronize with your Contacts list. 1. Sign in to your Google account. 2. From the Home screen, tap Accounts. Settings g Apps g Note: The Accounts area lists those accounts that have been added to the device and provides an Add account button to quickly and easily add new ones. Contacts List Tabs Search Contacts field Contacts Menu Create Contacts Groups Tabbed Navigation Creating a Contact The default storage location for saving phone numbers to your Contacts List is your devices builtin memory. If existing Google and Corporate email accounts have been synchronized to your phone, these will be made available to your device during the creation of new entries. These new Contacts entries can be assigned or saved to synced accounts such as Device, SIM, Google, or Corporate. Your device automatically sorts the Contacts entries alphabetically. You can create either a Device, SIM, Samsung account, Google, or Microsoft Exchange ActiveSync contact. Important! The Google and Microsoft Exchange ActiveSync account types are only visible after creating an email account of those types on your phone. Note: SIM contacts only store the Name and Phone number for an entry. Samsung account contacts are shared with your existing Samsung account. Google contacts are shared with your existing Google account and can also be imported to your phone after you have created a Google Mail account. Microsoft Exchange ActiveSync (also known as Work or Outlook) contacts are those contacts that are intended to be shared with either an Exchange Server or from within Microsoft Outlook. Add new account lets you create a new account type. Choose from Samsung account, Google, or Microsoft Exchange ActiveSync. Note: When storing an entry into your micro SIM card, note that only the Name, and Number are saved. To save additional information for a particular contact, such as notes, email, dates, etc., it is important to save that Contact into your phones onboard memory. 1. From the Home screen, tap 2. Tap to create a contact. Apps g Contacts. Note: You can also add a new contact by entering a number from the Phone keypad and then tapping Add to Contacts g Create contact. Continue with step 3. 3. Tap a destination type (Device, SIM, Samsung account, Google, or Microsoft Exchange ActiveSync)
(depending on where you want to save the new contact information). 4. Tap the Name field and enter a name for this contact using the displayed keypad. Tap to access additional name entries such as:
Name prefix, First name, Middle name, Last name, and Name suffix. 5. Tap the image icon and select a photo for this contact. Selections are: Image, Tagged pictures, or Take picture. Note: The label entries below can change and are dependant on the selected destination type (ex: the Other and Custom might not appear with an Exchange ActiveSync account destination type). 6. Tap the label button (to the left of the Phone field) and scroll through the list to select a category such as Mobile, Work, Home, Work Fax, Home Fax, Pager, Other, Callback, or Custom. 7. Tap a phone number field and enter a phone number. Tap Tap Tap on the QWERTY keyboard to remove a previously entered phone number. to enter an additional phone number to remove a previously entered phone number. 8. Enter additional information such as: Email, Groups, Ringtone, or tap Add another field to input additional category information. Add another field contains the following options: Phonetic name, Organization, IM, Address, Notes, Nickname, Website, Internet call, Events, Relationship, Message tone, and Vibration pattern. Use your finger to slide the page up or down to see additional fields and categories. Device contacts are stored locally on the device. Note: If the device is ever reset to its factory default parameters, contacts stored on the device can be lost. 9. Tap Save to complete and store the new entry. or Tap Cancel to delete the current entry. SIM contacts are stored within the micro SIM Card. 28 DRAFT Internal Use Only To save a Number from your Keypad:
1. From the Home screen, tap 2. Enter a phone number using the onscreen dialpad. 3. Tap Add to Contacts g Create contact or select the Contact entry from the onscreen list. Phone. or Tap Add to Contacts g Update existing, and select a Contact. 4. Enter additional contact information. Finding a Contact You can store phone numbers and their corresponding names onto either your SIM card, your devices builtin memory, or an external location (such as Google or Exchange). They are all physically separate but are used as a single entity, called Contacts. Depending on the storage size of the particular SIM card, the maximum number of phone numbers the card can store may differ. 1. From the Home screen, tap Apps g 2. Swipe up or down until you see the contact displayed. Contacts. or Tap the Search field and begin entering the entrys name. Matching entries are then displayed. This process filters through all of your current account Contact entries to only show you the matching entries. or In a single motion, touch and hold the letter tab area (on the right) until onscreen letters appear, then scroll through the list. You are then taken to that section of the Contacts list. Tap the contact entry. Editing Contact Information 1. From the Contacts screen, tap a contact name from the list and tap 2. Edit the contact information then:
Edit. Tap Save to complete and store the new entry or Tap Cancel to delete the current entry. Adding a Number to an Existing Contact 1. From the Home screen, tap Apps g Contacts. 2. Tap a contact name from the list and tap 3. Tap a phone number field and enter a phone number. Edit. Tap Tap Tap on the QWERTY keyboard to remove a previously entered phone number. to enter an additional phone number to remove a previously entered phone number. Contact Details Screen 4. Enter additional information such as: Email, Groups, Ringtone, or tap Add another field to input additional category information. Add another field contains the following options: Phonetic name, Organization, IM, Address, Notes, Nickname, Website, Internet call, Events, Relationship, Message tone, and Vibration pattern. Use your finger to slide the page up or down to see additional fields and categories. 5. Tap Save to complete and store the new entry. or Tap Cancel to delete the current entry. Adding a Pause or Wait to an Existing Contact 1. From the Home screen, tap 2. Tap Menu g Add 2-sec pause. This feature adds an automatic twosecond pause. Phone and use the onscreen keypad to enter a new phone number. or Menu g Add wait. This feature causes the phone to require your acceptance before sending the Tap next set of entered digits. 3. Tap Add to Contacts g Update existing. 4. Scroll through the available list of existing entries and select the desired target. Note: This new phone number is then added as a new number to the selected entry. 5. Tap the label button (to the left of the new phone number) and scroll through the list to select a category type. 6. Tap Save to store and update the entry. Section 4: Contacts 29 DRAFT Internal Use Only Deleting Contacts Contacts Settings 1. From the Home screen, tap 2. Tap Menu g Settings g Contacts. The following options display:
Apps g Contacts. Import/Export: Imports or exports contacts to or from the USB storage location, and SIM card or SD card. Contacts to display: Allows you to choose to display All contacts, those on your Device, SIM card, or only display contacts that are part of a Customized list. Note: Other account types such as Gmail, Samsung account, and Microsoft Exchange appear once they have been added to the device. Swipe to call or send msg: Allows you to enable the ability to either call or send a message to a targeted Contacts entry by either sliding left of right across the entry from the Contacts list. Only contacts with phones: Allows you to only display those Contacts entries that only have an available phone number. This hides all other entries with only email addresses, etc.. Note: If you have recently updated your entries from an external account (ex: Exchange or Gmail), and they do not appear in your list, disable the Only contacts with phones option to view all entries. Sort by: Allows you to sort the onscreen list of entries by either a First name or Last name. Display contacts by: Defines how the current list of Contacts are listed: First name first (ex: Steve Smith) or Last name first (Smith, Steve). Service numbers: Lists the currently available service numbers. Send contact information: Allows you configure how your Contacts entries are sent: individually or as a single file containing all available entries. Tap Export settings to select a share setting. Send together: Allows you to set your Contact sharing option to all so that your entire Contacts entries are sent as a group and not as multiple single files. If all your entries are selected only a single file is sent. Send individually: Allows you to set your default to send individual contacts one at a time. Even if you select all your entries, each is sent individually. Note: Your destination device must support this feature or no entries will be received by the external device. Accounts: Provides quick access to your accounts listing. Important! Once Contacts list entries are deleted, they cannot be recovered. 1. From the Home screen, tap 2. Touch and hold a contact name from the list, place a check mark alongside the desired entry, and select Contacts. Apps g Delete g OK. Contacts Screen Options 1. From the Home screen, tap 2. Tap Menu. The following options display:
Apps g Contacts. Select: Allows you to select entries by placing a check mark alongside a desired entry. Delete: Allows you to delete one or more of your selected contacts. Merge accounts: Allows you to merge all of your current Contact entries with either your active Google or Samsung account. If several of your contacts are from other external sources, this allows you to back them up or copy them to your Samsung account. Tap OK to continue or Cancel to exit. Speed dial: Allows you to set up speeddialing. Send message or email: Allows you to send a text /picture message or an email using your Google account. Link contacts: Allows you to link the current contact to another current contact. Similar to a see also feature. If you cant remember a contacts information, linking entries can help you find the person you are looking for. Settings: Allows you to configure where you access either Call or Contacts settings. Call: Provides quick access to the Phone settings menu. Contacts: Provides access to Contacts options such as:
Import/Export, Contacts to display, etc.. Help: Provides an onscreen Help file that covers most high level topics for Contacts. 30 DRAFT Internal Use Only Contact Entry Options 1. From the Contacts screen, tap an entry to reveal the Contact Overview Screen. This screen contains Name, contact numbers, email, and linked contact information. Contact Overview Screen 2. Tap 3. Tap an available option:
Menu to reveal the context menu specific to this entry. Delete: Allows you to delete the currently active entry. Link contacts: Allows you to link the current contact to another current contact. Mark as default: Allows you to mark one entry in a contact record to use as the default (page 32). Share name card: Allows you to send contact information as an attachment using an available option
(page 32). Send contact information: Alows you select specific elements of an existing contact (name, Mobile number, email, etc..) and send them to a recipient via a text message. This option does not send the entire Contact entry but only selected elements. Add to reject list: Allows you to add an entrys number to the reject list. Add shortcut to home screen: Adds a shortcut to the current Contacts entry to an available screen location. Linking Contact Information Most people now maintain multiple email accounts, social networking logins, and other similar account information. For example, a Facebook account login name might differ from a corporate email account login because they are maintained separately and for different groups of people. This device can synchronize with multiple accounts. When you synchronize your phone with those accounts, each account creates a separate contact entry in the Contacts list. If one of your contacts (Amy Smith) has a regular email account that you maintain in Gmail, but also has a Facebook account under her maiden and married name, as well as a Video! chat account, when you merge those accounts into your Contacts list you can join all of her entries and view the information in one record. Joining contact information makes sending messages easy. You can select any account email address or information all from one screen, versus searching multiple, individual screens to locate the desired account information. Next time you synchronize your device with your accounts, any updates contacts make to email account names, email addresses, etc. automatically update in your contacts list. 1. From the Home screen, tap Contacts. 2. Tap a contact name (the name you want to link to another entry) to reveal the Contact entrys Overview Apps g Screen. Note: Typically this is the same contact with a different name or account information. 3. Tap 4. Tap the second contact entry (the entry in which to link) and select Done. The second contact is now Menu g Link contacts. linked with the first and the account information is merged into one screen. Note: The information is still maintained in both entries, but displays in one record for easier viewing when you link the contacts. Important! It is the first contact image that is displayed for both, and the first contacts name that is used. For example: If Amy (original entry) is joined with Julie (second entry). Julie seems to disappear and only Amy remains. Tap the Amy entry (showing the Amy image) to view both. 5. Tap the main linked contact to view the contact information you linked. The contacts and information displays with an icon next to the contact name to indicate what type of account information is contained in the entry. Unlinking a Contact 1. From the Contacts screen, tap a contact name (the account name from which you want to unjoin an entry). This reveals the details for entry. Note: Typically this is the same contact with a different name or account information. 2. Tap Link within the Connected via area. or Tap Menu g Unlink contacts. 3. Tap next to the entry you want to unjoin and select OK. The contacts are unlinked or separated and no longer display in the merged record screen. Both contacts now go back to being separately displayed. Section 4: Contacts 31 DRAFT Internal Use Only Marking a Contact as Default When you use applications such as the Voice Dialer or other messaging type applications, the application needs to know which information is primary (default) in a contact entry list. For example, when you say Call John Smith, if you have three phone records for John Smith, the Voice dialer is looking for the default number or entry. The Mark as default option marks one entry in a contact record to use as the default. This comes in handy when you have multiple entries for the same person. 1. From the Contacts screen, tap a Contact entry. 2. Tap Menu g Mark as default. The Mark as default screen displays radio buttons next to the contact name, phone number, or other contact information. 3. Tap the radio button next to the entry information you want to be the primary information (such as name, phone number, or email) and select Save. Note: If there are multiple phone numbers assigned to an entry, assigning one as the default will automatically dial that number when the contact is selected for dialing. Copying Contact Information Copying Contact Information to the SIM Card The default storage location for saving phone numbers to your Contacts list is your phones builtin memory. This procedure allows you to copy numbers saved to the phones memory, onto the SIM card. 1. From the Home screen, tap 2. Tap 3. Tap Select all to choose all current phone contact entries. Menu g Settings g Contacts g Import/Export g Export to SIM card. Contacts. Apps g or Select a specific entry by touching an entry. A check mark indicates a selection. 4. Tap Done. The name and phone number for the selected contact is then copied to the SIM. Copying Contact Information to the microSD Card This procedure allows you to copy entry information saved on the phones memory, onto the SD card. 1. From the Home screen, tap Contacts. Apps g Sending a Namecard A Name card contains contact information, and can be sent to recipients as a Virtual Business Card (Vcard) attachment using Bluetooth, Google Mail, or as a message. 1. From the Contacts screen, tap a Contact entry. 2. Tap Menu g Share name card and select a delivery method. The Namecard attaches to the selected message type and is delivered when you send the message. 2. Tap 3. Tap OK to choose all current phone contact entries. Menu g Settings g Contacts g Import/Export g Export to SD card. Synchronizing Contacts Syncing data from your managed accounts allows you to add and manage a new or existing contact from your online or remote accounts to your phone. Prior to syncing, you must first have an active Google or Microsoft Exchange account with current Contact entries, and be signed into your account via the phone. Note: Email appears as an option only after an email account has been created. Sending All Current Namecards Rather than selecting one Contact entry at a time, you can send all of your current entries at once. 1. From the Home screen, tap 2. Tap Menu g Select g Select all to place a check mark alongside all currently displayed Contact Contacts. Apps g entries. 3. Tap Menu g Share name card and select a delivery method. Sending a namecard using Bluetooth You must create a Contact prior to sending a namecard to a recipient. 1. From the Home screen, tap Contacts. Apps g With syncing, any Contacts entries (with phone numbers, email addresses, pictures, etc.) are updated and synced with your device. 1. From the Home screen, tap Accounts and then navigate to the MY Settings g Apps g ACCOUNTS area. 2. Select the email account containing the contacts you wish to synchronize. 3. Tap within the adjacent account field to reveal the accounts synchronization settings screen. If appears within the adjacent account field, this indicates a sync error. 4. To synchronize only Contacts, toggle the active state of the Sync Contacts field. A check mark indicates the feature is enabled. Note: The process of updating your Contacts tab can take several minutes. If after 10-20 minutes, your list has not been updated, repeat step 2-3. 2. Tap a Contacts entry, and select Menu g Share name card g Bluetooth. 5. Your Contacts tab then reflects any updated Contact information. Important! You must activate Bluetooth to use this feature. Note: Syncing of contacts requires you are logged into your Gmail and Corporate accounts via the device. 3. Tap the Bluetooth device in which to send this name card. Bluetooth forwards the namecard to the recipient. 32 DRAFT Internal Use Only Display Options The Display options menu allows you to allows you to choose which contacts to display. You can also choose to display only contacts that have phone numbers. Groups This feature allows you to add a new or existing contact to a call group. This group can be one of the already present groups (Family, Friends, or Work) or a usercreated group. Note: Once a display filter has been selected, only those Contact entries are shown until the All contacts option is re-selected. From the Contacts screen, tap Menu g Settings g Contacts g Contacts to display. Select any of the following to filter according to the selection:
All contacts: Allows you to display all available Contacts. Device: Lists those Contacts currently found only on your Device. SIM card: Lists those Contacts currently found only on your SIM card. Samsung account: Lists those Contacts currently found and syncd within the Samsung account. Google: Lists those Contacts currently found within the Google account. Microsoft Exchange ActiveSync: Lists those Contacts currently found within the Exchange account. Customized list: Allows you to enable which account categories are displayed. For example, on Google contacts, you can filter which Contact categories are shown (Friends, Family, etc..) Additional Contact Options Sending an Email to a Contact Note: Contacts must contain and email account and address before you can use the Send email feature. Creating a New Caller Group 1. From the Home screen, tap 2. Tap 3. Tap the Group name field and use the onscreen keypad to enter a new group name. 4. Tap Group ringtone and select a ringtone for the group. Selections are: Default ringtone, Ringtones (select Add new group. Groups g Contacts. Apps g from available ringtones) or Add (to navigate your device and select an existing audio file). 5. Tap Group message tone and select a message alert ringtone to be associated with this group. 6. Tap Group vibration pattern and select a unique vibration pattern either from an available list or Create your own. This pattern is then associated with this group. 7. Tap Add member to add Contacts to the new group. 8. From the available list of contacts, tap the contact(s) you want to add. A check mark displays next to contact entry. Then tap Done. or Tap Select all to place a check mark alongside all current entries. Then tap Done. 9. Tap Save to store the newly created group. Note: Some externally maintained group types (such as Google) can only be managed or updated remotely online vs via the device. These external types will not allow editing or deleting members locally via the phone. 1. From the Contacts screen, tap Menu g Send message or email g Email. Contacts that contain an Adding an Existing Entry to a Current Caller Group email address display. 2. Tap the contact(s) to which you want to send an email. A check mark displays next to the selection. Note: The select contact must have an email as part of their details screen. 3. Tap Done. Note: If sending an email, select an email account type. 4. Compose the email and tap Send. Export/Import Provides additional import export options. For more information, refer to Copying Contact Information on page 32. 1. From the Contacts screen, tap 2. Tap a group entry g 3. From the available list of contacts, tap the contact(s) you want to add. A check mark displays next to Add group member. Groups. contact entry. 4. Tap Done. The selected contacts are added to the group. Removing an Entry From a Caller Group 1. From the Contacts screen, tap Groups. 2. Tap a group entry g 3. Tap all of the contacts you want to remove from this group. A check mark displays next to contact entry. 4. Tap Done. The contacts are removed from the group. Menu g Remove from group. Editing a Caller Group To edit a Group entry, there must be at least one member as part of the selected group. 1. From the Contacts screen, tap Groups. 2. Tap a group entry g 3. Make modifications to the Group name, Group ringtone, Group message tone, Group vibration pattern Menu g Edit group. fields, or Add member. 4. Tap Save. Section 4: Contacts 33 DRAFT Internal Use Only Deleting a Caller Group 1. From the Contacts screen, tap 2. Tap 3. Tap the desired group and select Done. Menu g Delete group. Groups. Sending a Message to a Group 1. From the Contacts screen, tap Groups. 2. Tap an existing group, and tap 3. Select the recipients of the new message (indicated by a green check mark). If an entry contains multiple Menu g Send message or email. phone numbers, each must be selected individually. 4. Tap Done. 5. Type your message, and tap Send. The Favorites Tab The Favorites tab is a list of the phone numbers that have been designated as favorite contacts. 1. From the Home screen, tap 2. Tap Adding a contact to your favorites list:
1. From within the Favorites tab, tap 2. Place a check mark alongside those current Contacts entries you wish to assign as favorites. 3. Tap Done to complete the process. Add to favorites. Favorites tab. Contacts. Apps g 34 DRAFT Internal Use Only Section 5: Messages This section describes how to send or receive different types of messages. It also explains the features and functionality associated with messaging. Types of Messages Your phone provides the following message types:
Text Messages Multimedia (Picture, Video, and Audio) Messages Email and Gmail Messages Hangouts ChatON The Short Message Service (SMS) lets you send and receive text messages to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service providers message service. The Multimedia Messaging Service (MMS) lets you send and receive multimedia messages (such as picture, video, and audio messages) to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service providers multimedia message service. Important! During the creation of a text message, adding an image, sound file, or video clip automatically changes it from a text message (SMS) to a multimedia message (MMS). Message Icons on the Status Bar Messaging icons are displayed on the Status Bar at the top of the display when new messages are received. For more information, refer to Status Bar on page 13. 5. Tap the Enter message field and use the onscreen keypad to enter a message. For more information, refer to Text Input Methods on page 18. 6. Tap Add emoticons to choose an available emoticon from an onscreen list and then add it into your message (at the cursor location). 7. Tap Attach to add an attachment to your message and select one of the following options:
Image: Allows you to tap an existing image from your Pictures list to add it to your message. Take picture: Allows you to temporarily exit the message, take a photo with phones camera, and then add it to your message by tapping Save. Video: Allows you to choose an existing video from the Videos list, then add it to your message. Record video: Allows you to temporarily exit the message, record a video clip using the phones camera, and then add it to your message by tapping Save. Audio: Allows you to choose an existing audio file from the Audio list, then add it to your message by tapping the circle to the right of the audio so that it turns green, then tapping Done. Record audio: Allows you to temporarily exit the message and record an audio clip using the phones microphone. It is then automatically attached to the message. Memo: Allows you to add a memo that you have created. Calendar: Allows you to add an event from your calendar. My location: Allows you to attach a Google Maps URL location indicating your current location. Maps: Allows you to attach both a thumbnail and Google maps url link about your current location. Contacts: Allows you to tap on an existing Address Book entry, then add it to your message by tapping Note: The Messaging application can also be accessed by pressing g Messages. Home and then tapping Apps Done. Creating and Sending Messages 1. From the Home screen, tap 2. Tap the Enter recipients field to manually enter a recipient. Messages g Tap to compose message. or to select from one of the following:
Tap Logs: Select a recipient from a list of recently sent messages. Favorites: Select a recipient from the Favorites list. Contacts: Select a recipient from your Contacts list (valid entries must have a wireless phone number or email address). Groups: Select a recipient from the Group list. 3. If adding a recipient from either Logs, Contacts, or Groups, tap the contact to place a check mark then tap Done. The contact displays in the recipient field. Note: Delete any unnecessary members by tapping their name/number in the recipient area and selecting Delete. 4. Add more recipients by tapping either the Enter recipients field or and selecting recipients. 8. Review your message and tap 9. If you have more than one recipient, the same text message is sent to all recipients in the Enter Recipients Send. field. Note: If you exit a message before you send it, it will be automatically saved as a draft. Quick Messaging a Number from the Contacts List 1. From the Home screen, tap 2. Locate an entry from the Contacts list. 3. In a single motion, touch and drag your finger over the number by going to the left. This action addresses Contacts. Apps g a new text message to the selected recipient. Section 5: Messages 35 DRAFT Internal Use Only Message Options Options before composing a message 1. From the Home screen, tap 2. Before composing a message, select Messages. Search. Search: Allows you to search through all of your messages for a certain word or string of words. Use the onscreen keypad to enter a word or phrase in which to search. For more information, refer to Message Search on page 37. or Menu to display additional messaging options:
From the main Message screen, tap Select: Allows you to select desired messages. Delete: Deletes the entire message and its bubbles. Draft messages: Displays the draft messages folder and its contents. Locked messages: Displays the locked messages folder and its contents. Scheduled messages: Displays the scheduled messages folder and its contents. Spam messages: Displays the spam messages folder and its contents. Quick responses: Displays your available preset text message reply templates. For more information, refer to Quick Responses on page 39. Font size: Allows you to configure the font size in use within your Messages application. Settings: Allows you to access Messaging settings. For more information, refer to Messages Settings on page 37. Help: Provides onscreen help information. 3. From the Messages screen list, touch and hold an onscreen message and select an option:
Add to spam numbers: Allows you to tag a number as spam so that these messages can be directly delivered to your spam folder. Delete: Deletes the entire message and its bubbles. Options while in a current message 1. From the Home screen, tap 2. From within an open message, tap either Messages. Call to dial the current message phone number or tap Menu to display additional messaging options:
3. From within an open message, tap either:
Call to dial the current message phone number. Delete to delete any message thread. Select the messages to delete and a green check mark will appear next to the message. Tap Delete. or Menu to display additional messaging options:
Tap View contact: Allows you to view the existing contact details for the current sender. Add to contacts: Allows you to add the sender to either a new or existing Contacts entry. Quick responses: Displays your available preset text message reply templates. For more information, refer to Quick Responses on page 39. Add recipient: Allows you to enter additional recipients to the message. Insert smiley: Allows you to add insert smiley icons images (emoticons). Add subject: Allows you to enter a subject. 36 Preview (only in MMS): Allows you to add preview the MMS message prior to delivery. Add slide: Converts an SMS message into an MMS (Multimedia) message and allows you to attach an existing slideshow. Schedule message: Allows you to schedule a time for the current message to be delivered. Duration (5 sec) (only in MMS): Allows you to change the duration of the image slideshow. Layout (bottom) (only in MMS): Allows you to change the layout. Add to/Remove from priority senders: Assigns or removes the current recipients phone number to/from a priority list for message delivery. Add to/Remove from spam numbers: Assigns or removes the current recipients phone number to/from the list of spam numbers. Note: Priority senders appear at the top of the main Messages screen. Discard: Closes the current open message. Font size: Allows you to configure the font size in use within your Messages application. Viewing Newly Received Messages When you receive a message, your phone notifies you by displaying of your Home screen. To read a message:
1. Open the Notification Bar and select the message. For more information, refer to Notification Panel on page within the Notification area at the top left 15. or From the Home screen, tap message displays on the screen. Messages then tap the new message to view its contents. The selected 2. Tap to play a multimedia message. To pause playback of the multimedia message, tap
. 3. In a single motion, touch and drag up or down the page to scroll through the message (if additional pages were added). Message Threads Sent and received text and picture messages are grouped into message threads. Threaded messages allow you to see all the messages exchanged (similar to a chat program) and displays a contact on the screen. Message threads are listed in the order in which they were received, with the latest message displayed at the top. To reply to a text message:
1. From the Home screen, tap 2. While the message is open, tap the Enter message field and then type your reply message. 3. Compose your reply. 4. Tap Send to deliver your reply. Messages. or Tap Menu and then select one of the available message options. DRAFT Internal Use Only Current Recipient Reply Bubbles My Text Text Message Thread To access additional Bubble options:
Touch and hold the message bubble within an active message conversation to display the following options:
Delete: Deletes the currently selected message bubble from the thread. Copy text: Copies the currently selected message bubble from the thread. View slideshow: Displays the current bubbles media files as an onscreen slideshow. Forward: Allows you to forward the currently selected message bubble to an external recipient. Lock/Unlock: Locks or unlocks the currently selected message bubble from being accidentally deleted. Save attachment: Saves the current attachment (such as a media file) locally. Copy to SIM: Copies the currently selected message bubble as a single text message within the SIM card. Share: Allows you to share the contents of the selected bubble (text, media, etc..) via an available delivery method. View message details: Displays details for the currently selected message bubble. Deleting Messages Deleting message threads 1. From the Home screen, tap 2. Touch and hold a message from the Messages list, then select Delete g OK. Messages. Deleting message bubbles 1. From the Home screen, tap 2. Open a message to reveal the message string. 3. Touch and hold a message bubble, then select Delete. Messages. Message Search You can search through your messages by using the Message Search feature. 1. From the Messages screen, tap 2. Use the onscreen keypad to enter a word or phrase in which to search, then tap 3. All messages that contain the entered search string are displayed. Search. Messages Settings To configure the settings:
1. From the Messages screen, tap 2. Alter any of the following available options:
Menu g Settings. Default messaging app field: Sets your default messaging application. Display: Alters the display properties for Messages. Bubble style: Allows you to choose from several bubble styles for your messages. Bubbles are the rounded boxes that surround each message. Background style: Allows you to choose from several background styles for your messages. Change font size: Allows you to change the text size by using the up or down volume keys. Text messages: Alters the SMS settings. Delivery reports: When this option is activated, the network informs you whether or not your message was delivered. Manage SIM card messages: Allows you to manage the messages stored on the SIM card. Input mode: Allows you to set the input mode for your text messages. Choose from: GSM Alphabet, Unicode, or Automatic. Message center: Allows you to enter the number of your message center where your messages reside while the system is attempting to deliver them. Multimedia messages: Alters the MMS settings. Group conversation: When this option is activated, all new outgoing messages are group messages. Delivery reports: When this option is activated, the network informs you whether or not your message was delivered. Read reports: When this option is activated, your phone receives a request for a read reply along with your message to the recipient. Auto retrieve: Allows the message system to automatically retrieve messages. Roaming auto retrieve: Allows the message system to automatically retrieve while roaming. Section 5: Messages 37 DRAFT Internal Use Only Set restrictions: Allows you to select the creation mode. Choose from Restricted (you can only create and submit messages with content belonging to the Core MM Content Domain), Warning (the device will warn you via pop up messages that you are creating a multimedia message which does not fit the Core MM Content Domain), Free (you may add any content to the message.) MMS alert: Alerts you when the messaging modes changes from an SMS (text) to MMS (multimedia) mode. Delete old messages: Deletes old messages when the limit is reached, rather than overwriting them. Priority senders: Activates or deactivates the priority sender feature. Push messages: Allows you to receive push messages from the network. Notifications: Allows you to see message notifications on your status bar. Emergency alerts: Configures the emergency alert parameters:
Emergency alerts: Allows you to configure emergency alert settings. You can enable/disable those alert categories you wish to receive. Choose from: Imminent extreme alert, Imminent severe alert, and AMBER alerts. Emergency Alert Configuration This device is designed to receive wireless emergency alerts from the Commercial Mobile Alerting System (CMAS);
which may also be known as the Personal Localized Alerting Network (PLAN). If your wireless provider has chosen to participate in CMAS/PLAN, alerts are available while in the provider's coverage area. If you travel outside your provider's coverage area, wireless emergency alerts may not be available. For more information, please contact your wireless provider. Emergency Alerts allows customers to receive geographicallytargeted messages. Alert messages are provided by the US Department of Homeland Security and will alert customers of imminent threats to their safety within their area. There is no charge for receiving an Emergency Alert message. There are three types of Emergency Alerts:
Alerts issued by the President Alerts involving imminent threats to safety of life AMBER Alerts (missing child alert) Customers may choose not to receive Extreme Alerts, Severe Alerts, and AMBER Alerts. Note: The Presidential alert can not be disabled. Important! Alerts issued by the President can not be disabled. Emergency notification preview: Allows you to play a sample emergency alert tone. Tap Stop to cancel the To disable Extreme, Severe, and AMBER Alerts:
playback. Signature: Configures message signatures:
Edit signature: Allows you to enter a desired signature for your message. Spam filter: When enabled, allows you to configure available spam settings such as:
Add to spam numbers: Allows you to manually enter and assign a phone number as being sent from a spam source. Add to spam phrases: Allows you to assign a specific text phrase as belonging to a spam message. Ex:
Dear friend. Block unknown senders: When active, automatically blocks incoming messages from unknown sources or blocked numbers. Delay message sending: Allows you to set a time delay limit that determines how long the messages are held until they are sent. This can allow you to cancel the delivery of a recent message. Safe mode: Allows you to set security parameters for Messages. Choose from Allow access to all links and Potential threat alerts. 1. From the Messages screen, tap 2. Scroll down the screen and select Emergency alerts. All alerts are enabled by default (check mark Menu g Settings. showing). 3. Tap on an alert option to disable the alert and remove the check mark. Assigning Messages as Spam You can now assign either a phone number as spam or use a key term or phrase. Any message assigned as spam is automatically placed with your Spam messages folder. To assign a phone number from Messages list as spam:
1. From the Messages screen, touch and hold a message from a phone number. 2. Select To assign a phone number manually as spam:
Add to spam numbers and tap OK. 1. From the Messages screen, tap 2. Locate and activate the Spam filter option. Menu g Settings. Spam filter: When enabled, allows you to configure available spam settings such as:
3. Tap Add to spam numbers g Add. This function allows you to manually enter and assign a phone number as being sent from a spam source. 4. Tap the enter number field to manually enter phone number. or Tap or to select from either your existing Logs or Contacts. Tap Match criteria and select a parameter that must match for the spam action to take effect. Choose from: Same as, Starts with (ex: 800 or 888), Ends with, or includes. 5. Tap Save. 38 DRAFT Internal Use Only To register text phrases as spam:
Some incoming messages might not be associated with a phone number but rather an email address. In these cases, the only way to block those messages, would be assign a key used term or phrase to activate the Spam block. Ex: Dear friend, Stock Alert, or Act Now. 1. From the Messages screen, tap 2. Locate and activate the Spam filter option. 3. Tap Add to spam phrases g Add. Menu g Settings. This function allows you to assign a specific text phrase as belonging to a spam message. Ex: Dear friend. 4. Enter a term or word into the field. 5. Tap Save. To register unknown numbers as spam:
Some incoming messages might not be associated with either a phone number or email address. These incoming messages contain no information as their info is blocked by the sender. 1. From the Messages screen, tap 2. Locate and activate the Spam filter option. 3. Tap Block unknown senders. A check mark indicates the feature is active. Menu g Settings. Block unknown senders: When active, automatically blocks incoming messages from unknown sources or blocked numbers. If an incoming message is designated in coming from an unknown sender, it is automatically assigned as spam and is now located in your Spam folder. Accessing Your Spam Folder Any message assigned as spam is automatically placed with your Spam messages folder. From the Messages screen, tap Menu g Spam messages. Quick Responses This screen displays your available text message reply templates. This is a readily accessible list of both default and userdefined text snippets that can be used to quickly reply to incoming messages. 1. From the Messages screen, tap 2. Tap a message to immediately insert it into your current message conversation. To create your own quick responses:
Menu gQuick responses. 1. From the Messages screen, tap 2. Tap 3. Enter a new text string and tap Save. Add. Menu gQuick responses. Using Email Email (or Internet Email) enables you to review and create email using several email services. You can also receive text message alerts when you receive an important email. Your phones Email application lets you access and manage multiple email accounts simultaneously in one convenient location. There are currently three main types of email accounts on your phone: Gmail, Internetbased email, and Microsoft Exchange (Corporate email or Outlook). To send and receive email messages through an ISP (Internet Service Provider) account, or if you wish to use your device to access your corporate email through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account. Creating an Internet Email Account 1. From the Home screen, tap 2. If you already have other email account setup:
Apps g Email. Open an existing email account, tap and then select Settings g Manage accounts g Add account. or Enter your Email address and Password information. Email address: your Internet email address. Password: typically your network access password (casesensitive). 3. Tap Show password to display the password as you enter it in the associated field. Tap Manual setup to configure your connection settings manually (POP3 or IMAP). Follow the onscreen prompts and enter the information specific to your email provider. Tap Send email from this account by default to assign this email account as your default account for all outgoing emails. 4. Tap Next. 5. At the Account options screen, select the frequency which the device should check for new email on the server and tap Next. Important! The Sync Email feature must be enabled to allow synching between your device and the remote server. Tap the Notify me when email arrives field to receive new email notifications. Tap the Automatically download attachments when connected to Wi-Fi field to assist with faster access to large email attachments when using WiFi. 6. At the Set up email screen, name the account and enter a screen name to identify yourself on this account. The unique account name is used to differentiate this account from other email accounts accessed by your device. 7. Tap Done to store the new account. Messages for this account display on the Inbox tab. You can also view Personal information for this account, Receipts (if you setup the account to return receipts), Travel information, and more (if available). Section 5: Messages 39 DRAFT Internal Use Only Opening an Email Configuring Email Settings 1. From the Home screen, tap 2. Tap Inbox (account name field upperleft) to open the complete email account list page. Apps g Email. 1. From the Home screen, tap Apps g Email. 2. Select an account and tap Menu g Settings and alter any of the following GENERAL SETTINGS:
Display: Allows you to configure the way in which your email list is displayed. Default display: Allows you to choose what is shown onscreen after you have moved or deleted emails. Choose form: Next email, Previous email, or Email list. Priority sender settings: Allows you to assign Contacts as priority senders, Set as the default folder, assign email notifications, ringtones, and vibration patterns for emails from these senders. Spam addresses: Allows you to create a list of spam email addresses. Delay email sending: Allows you to set a time delay limit that determines how long the emails are held until they are sent. This can allow you to cancel the delivery of a recent email. or From the email application, select an account and tap
<Account>. Alter any of the following settings:
Sync settings: Allows you to adjust the email synchronization settings, adjust the sync schedule, and adjust Menu g Settings g Manage accounts g the email retrieval size. Signature: Lets you both attach a customized signature and include a handwritten signature to the bottom of all outgoing emails. In a single motion touch and slide the Signature slider to the right to turn it on. Tap the Signature field, change the current text, and tap Done to save the new signature. Default account: Assign this account as the default email account used for outgoing messages. Password: Allows you to update your password to match the one on the email server. Email notifications: Activates the email notification icon to appear within the Notifications area of the status bar when a new email (Gmail, etc..) is received. Notification sound: Plays a selected ringtone when a new email message is received. Vibrate: Activates a vibration when a new email message is received. Selecting this Combined view allows you to view all the emails for your current accounts, managed by the application, to be listed on a single screen. 3. Select an email account and tap an email message. Refreshing Email messages 1. From the Home screen, tap 2. Select an email account. Apps g Email. If you are already in an email account, tap the account name field (upperleft) to open the complete email account list page. Select an available email account. 3. Tap Refresh. Composing Email Inbox (account name field upperleft) to open the complete email account list page. 1. From the Home screen, tap 2. Tap 3. Tap Inbox g 4. Enter the recipients email address in the To field. Compose. Apps g Email. If you are sending the email message to several recipients, separate the email addresses with a comma. You can add as many message recipients as you want. 5. Tap Options g Cc/Bcc fields to add additional carbon copy and blind copy recipients. Use the Cc field to carbon copy additional recipients. Use the Bcc field to blind copy additional recipients. 6. Tap the Subject field and enter the email subject. 7. Tap the email text field and compose your email message. To add an attachment (such as image, video, audio, etc..), tap Attach (from the top of the screen) and make a category selection. Tap the file you wish to attach. Tap to delete the attached file. Note: If you attach an image to your email, you have the option to resize it prior to delivery. Choose from:
Original, Large (70%), Medium (30%), or Small (10%). Once chosen, tap either Always or Just once. 8. Tap Save to store a draft of the current email on your device so that you can come back later and continue the email. 9. Tap 10. Once complete, tap Send. Delete to discard the current email. 40 DRAFT Internal Use Only 3. Tap the More settings field to access additional options:
Account name: Displays your uniquely created account display name. Your name: Displays the name used in the From field of your outgoing email messages. Always Cc/Bcc myself: Allows you to include your own email address in either the CC, Bcc, or None fields. Lets you always receive a copy of outgoing emails. Show images: Allows you to view embedded images located within the body of the currently displayed email. Security options: Allows you to enable several security options such as: Encrypt all, Sign all, Create keys, Private keys, Public keys, and Set default key. These security policies could restrict some functions from corporate servers. Auto download attachments: Allows the device to automatically download email attachments when an active WiFi connection is detected. This process speeds up the process of downloading an emails attachments for offline review by not using a cellular network connection. Incoming settings: Lets you specify incoming email settings. Outgoing settings: Lets you specify outgoing email settings. Note: Some the above options may not be displayed when using some Internet account types. Microsoft Exchange Email (Outlook) Your phone also provides access to your companys Outlook Exchange server. If your company uses the Microsoft Exchange Server, you can use this email application to wirelessly synchronize your email, Contacts, and Calendar information directly with your companys Exchange server. Setting Up a Microsoft Exchange Email account 1. From the Home screen, tap Apps g Email. Note: If you have already set up an email account and want to add an additional email account, tap g Settings g Manage accounts g Addaccount. 2. Enter your Email address and Password information. Tap Show password to display the password as you enter it in the associated field. 3. Follow the onscreen instructions. Note: If prompted with an on-screen notification that the connection that the Setup could not finish, tap Edit details to continue with a manual update of necessary information. Important! Remember to manually place the cursor in the correct spot and enter a Domain name before the
[Domain]\[user name] entry. Most servers only provide a username. 4. Consult your IT Administrator if it is necessary to enable the Use client certification option. 5. Identify your new work email account with a unique name (Ex: Work), then tap Done. Opening an Exchange Email 1. From the Home screen, tap 2. Tap the account name field (upperleft) to open the complete email account list page. 3. Select an exchange email account and tap an email message. Apps g Email. Refreshing Exchange Email 1. From the Home screen, tap 2. Select an email account. Apps g Email. If you are already in an email account, tap the account name field (upperleft) to open the complete email account list page. Select an available email account. 3. Tap Refresh. Composing Exchange Email For more information, refer to Composing Email on page 40. Deleting an Exchange Email Message Touch and hold an email (from your inbox list) and select Delete from the onscreen context menu. or With the email message open and displayed, tap Delete. Section 5: Messages 41 DRAFT Internal Use Only Configuring Microsoft Exchange Email Settings Period to sync Calendar assigns a period for your phone to sync calendar events. Choose from: 2 weeks, 1 1. From the Home screen, tap 2. Tap the Microsoft Exchange account. 3. From the current Email inbox listing, tap Apps g account>. 4. Alter any of the following settings:
Email. month, 3 months, 6 months, or All calendar. Menu g Settings g Manage accounts g <Exchange email Sync settings to configure the following sync options:
Sync Email: enables automatic email synching between your device and the remote server. Sync schedule: allows you to control the email sync schedule on both Peak and OffPeak times. Period to sync email to assign the sync range for your incoming and outgoing email messages between your phone and your external exchange server. How many days worth of email messages should the phone and server synchronize. Choose from: 1 day, 3 days, or 1 week. Limit retrieval size configures the incoming email size allowed to pass through to your phone automatically without user interaction. Emails with attachments larger than configured will have to be retrieved manually. Empty server trash: allows you to delete your email accounts trash bin remotely. In case of sync conflict allows you to assign the master source on emails. If there is a conflict with the current email sync you can assign the server as the main source for all emails (Server has priority) or assign the phone to be the main source and update the server accordingly (Device has priority). Security options: allows you to enable several security options such as: Encryption, Encryption algorithm, Sign, Sign algorithms, Email encryption cert, Email signing cert, and Security policy list. These security policies could restrict some functions from corporate servers. Sync Contacts synchronizes the contacts between your device and the remote exchange server. Sync Calendar synchronizes your exchange calendar entries between your device and the remote exchange server. Sync Task synchronizes your exchange tasks entries between your device and the remote exchange server. Exchange server settings provides access to the Domain\user name, Password, and Exchange server settings. Signature: lets you both attach a customized signature and include a handwritten signature to the bottom of 6. Press Back to return to the previous page. all outgoing emails. In a single motion touch and slide the Signature slider to the right to turn it on. Tap the Signature field, change the current text, and tap Done to save the new signature. Out of office settings allows you to both activate/deactivate your emails out of office settings, and configure both the start/end dates and your outgoing message. Default account: assign this account as the default email account used for outgoing messages. Password: allows you to update your password to match the one on the email server. Email notifications: activates the email notification icon to appear within the Notifications area of the status bar when a new email (Gmail, etc..) is received. Notification sound: Plays a selected ringtone when a new email message is received. Vibrate: activates a vibration when a new email message is received. 5. Tap the More settings field to access additional options:
Account name: displays your uniquely created account display name. Always Cc/Bcc myself allows you to include your own email address in either the CC, Bcc, or None fields. Lets you always receive a copy of outgoing emails. Show images: allows you to view embedded images located within the body of the currently displayed email. Auto download attachments: allows the device to automatically download email attachments when an active WiFi connection is detected. This process speeds up the process of downloading an emails attachments for offline review by not using a cellular network connection. Folder sync settings allows you to configure the sync settings for various folders such as Inbox, Drafts, Outbox, etc.. 42 DRAFT Internal Use Only Section 6: Multimedia This section explains how to use the multimedia features of your device, including the Camera/Camcorder, and how to manage your photos, images and sounds. You can take photographs and shoot video by using the builtin camera functionality. Your camera produces photos in JPEG format. Important! Do not take photos of people without their permission. Do not take photos in places where cameras are not allowed. Do not take photos in places where you may interfere with another persons privacy. Note: An SD card is not needed to take pictures or shoot video since there is already built-in storage. 4. If desired, before taking the photo, you can tap onscreen icons to access various camera options and settings. 5. You can also tap the screen to move the focus to a desired area of interest. 6. Tap Camera until the shutter sounds. (The picture is automatically stored within your designated storage location. Note: Touch and hold to take a burst shot. These are saved using a Fine image quality. Self-portrait Camera mode Battery charge Note: Using an older or slow microSD card can affect camera performance, especially for video recording. Assigning the Default Storage Location Important! Too many users can overlook this storage location until something goes wrong. It is recommended that you verify this location or change it before initiating the use of the camera or camcorder features. Shortcut menu 1. From the Home screen, tap Apps g Camera g Settings and scroll up to the Storage location entry. 2. Tap this entry and select the desired default storage location for newly taken pictures or videos. Choose Take picture Mode from: Device or Memory card. Note: It is recommended that you set the option to Memory card. 3. Press Home to return to the Home screen. Using the Camera Taking Photos Taking pictures with your devices builtin camera is as simple as choosing a subject, pointing the camera, then pressing the camera key. Settings Viewfinder Record video Image viewer button Camera Options Options are represented by icons across both sides of the screen. 1. From the camera viewfinder, tap MODE Mode to change the mode to one of the following:
Auto: Automatically adjust the exposure, color, and brightness settings. This mode allows single image Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo. shots or burst shots. 1. From the Home screen, tap Apps g Camera. or From the Lock screen, swipe across the onscreen camera icon to launch the camera application. 2. Using the devices main display screen as a viewfinder, adjust the image by aiming the camera at the subject. Beauty face: Take photos with lightened faces for gentler images. Panorama: Take wide panoramic photos. Press the Shutter button to take a photo, and then move the camera in any direction. When the blue frame aligns with the preview screen, the camera automatically takes another shot in the panoramic sequence. To stop shooting, press the Shutter button again. Shot & shot: Use this mode to enrich pictures by adding background sounds for a few seconds. The background sound is recorded for up to 9 seconds after taking the photo. Note: On your initial activation of the camera, firmware configuration can take up to 1 minute. This is a one time Sports: Use this to take fast action photos. process. 3. Pinch the screen to zoom out or pinch outwards to zoom in. You can magnify the picture up to x4 (400 percent). Section 6: Multimedia 43 DRAFT Internal Use Only Taking Dual Camera Photos With the Dual Camera feature, you can take a picture with both the front and rear cameras at the same time. To take a Dual Camera picture:
1. From the camera viewfinder, tap MODE Mode and select Dual camera. The camera viewfinder displays an image from the frontfacing camera within a mini picture frame on top of the main image displayed from the rearfacing camera. Camera until the shutter sounds. 2. Tap To resize the front camera image:
Touch and hold the mini picture frame until the resize handles appear, then drag a corner to enlarge the image. To reposition the front camera image:
Touch and hold the mini picture frame to detach it and then place it in a desired location. Camera and Camcorder Settings This section describes the different settings that you can configure on your camera. Not all of the following options are available in both still camera and video camera modes. The available options vary by mode. From the main camera screen, tap Settings to quickly change these settings. The settings that are displayed will depend on what camera mode you are in. Picture size: Select a resolution for photos. Use higher resolution for higher quality. Higher resolution photos take up more memory. Face detection: Allows you to adjust the camera focus based on face detection technology. ISO: Determines how sensitive the light meter is on your digital camera. Use a lower ISO number to make your camera less sensitive to light, a higher ISO number to take photos with less light, or Auto to let the camera automatically adjust the ISO for each of your shots. Metering modes: Allows you to set how the camera measures or meters the light source: Centerweighted, Matrix, or Spot. Shutter sound: Turn the shutter sound on or off. Voice control: Activates/deactivates voice control feature that allows you to verbally take a photo. Help: Provides an onscreen set of help topics. Rese settings: Reset the camera settings. Pictures and Videos Image Viewer Options After you take a photo or record a video, you can access various options. Photo viewing options 1. Tap a thumbnail from the Thumbnail viewer to view a preview of the picture. Note: If no control icons are displayed on the screen in addition to the picture, tap anywhere on the screen to display them. 2. The following options are available at the top of the screen:
Change player Share via Edit
: Allows you to select a different Samsung Link device from your available list.
: Allows you to share the picture via an available onscreen option.
: Allows you to edit the current image. Launches the editor application. Delete
: allows you to delete the current picture. 3. Tap Menu for additional options such as:
Remove sound: Allows to remove an embedded sound file. More info: Provides file details such as Date, Location, Category, Tags, and Additional Details (Title, Type, Date, Album, Size, Resolution, Orientation, Manufacturer, Model, Focal length, White balance, and Path). Copy to clipboard: Allows you to copy the current file to your devices temporary clipboard. Rotate left: Allows you to rotate the view of the current image in a counterclockwise direction. Rotate right: Allows you to rotate the view of the current image in a clockwise direction. Tap to take pics.: Allows you enable the ability to also take images by tapping on the screen. Video size: Select a resolution for videos. Use higher resolution for higher quality. Higher resolution videos Crop: Provides an onscreen box that allows you to crop the current picture. Tap Done to update the image with the new dimensions or tap Cancel to ignore any changes. Rename: Allows you to rename the current file. Slideshow: Allows you to see your photos in a slideshow. Set as: Allows you to set the current image as either a Contact photo, Home screen, Lock screen, or Home and lock screens. Print: Allows you to print the current image on a compatible printer. Settings: Provides access to the Gallery options menu. Choose from SNS DATA MANAGEMENT (Sync only via WiFi), TAGS (Tag buddy or Face tag), or SOUND & SHOT (Auto play sound). take up more memory. Recording mode: Select a resolution for videos. Choose from: Normal or Limit for MMS. Effects: Provides access to preinstalled and downloaded effects. Default effects include: No effect, Vignette, Faded color, Grayscale, Sepia, Tint, Turquoise, Cartoon, Fisheye, Moody, Oil pastel, Rugged, Download (additional effects). Flash: Activate or deactivate the flash. Timer: Use this for delayedtime shots. You can set the timer to Off, 2 sec, 5 sec, or 10 sec. Location tag: Attach a GPS location tag to the photo. To improve GPS signals, avoid shooting in locations where the signal may be obstructed, such as between buildings or in lowlying areas, or in poor weather conditions. Your location may appear on your photos when you upload them to the Internet. To avoid this, deactivate the GPS tag setting. Storage location: Select the memory location for storage. White balance: Select an appropriate white balance, so images have a truetolife color range. The settings are designed for specific lighting situations. These settings are similar to the heat range for whitebalance exposure in professional cameras. Exposure value: Allows you to adjust the brightness level by moving the slider. Guide lines: Display viewfinder guides to help composition when selecting subjects. 44 DRAFT Internal Use Only Video viewing options Accessing Videos Note: If no control icons are displayed on the screen in addition to the picture, tap anywhere on the screen to display them. 1. Tap a video to select it. 2. Tap to play the video. or Select any of these onscreen options:
Share via
: allows you to share the video via an available onscreen option. Trim Delete
: activates the Trim feature so that you can edit the length of the current video.
: allows you to delete the current video. Choose either OK or Cancel. 3. Tap Menu for additional options. Using the Camcorder In addition to taking photos, the camera also doubles as a camcorder that also allows you to record, view, and send high definition videos. Shooting Video Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your subject with sufficient light by having the light source behind you. Note: The camera may not be able to properly record videos to a memory card with a slow transfer speed. 1. From the Home screen, tap 2. Using the cameras main display screen as a viewfinder, adjust the image by aiming the camcorder at the Camera to activate the camera mode. Apps g subject. 3. Before you take a video, you can magnify the video up to x4 (400 percent). 4. Tap 5. Tap anywhere on the screen to refocus the camera on that object. The camcorder autofocuses on the Video to begin shooting video. The red light will blink while recording. new target area. 6. To capture an image from the video while recording, tap
. This feature is not available while the antishake feature is activated. 7. Tap Stop to stop the recording and save the video file to your Camera folder. or Tap Pause to pause the recording. 8. Once the file has been saved, tap the image viewer, then tap 9. Press Back to return to the viewer. Play to playback your video for review. When you shoot a video, the file is saved in the Camera folder. You can view your videos immediately or view them anytime in the Camera folder. 1. From the Home screen, tap 2. Select a folder location and tap a video icon to begin video playback. 3. Tap Play to begin video playback. Apps g Gallery. or Touch and hold the video icon from the main Gallery to select the video (indicated by a colored border) and display the following video menu context options:
Share via Delete
: allows you to delete the current video. Choose either OK or Cancel.
: allows you to share the video via an available option. or Touch and hold a listed video file to place a check mark alongside and then tap options:
Menu for additional Copy to: allows you to copy the current video to an existing album. Add to event: allows you to add the current video to an existing event. Studio: allows you to open the currently selected file within the Studio application. Slideshow: allows you to see your files in a slideshow or access the slideshow settings. Details: displays video file information. or With the video displayed onscreen (but not playing), tap Menu for additional options:
More info: provides details about the current file. Rename: allows you to rename the filename of the currently selected video. Slideshow: allows you to see your files in a slideshow or access the slideshow settings. Settings: provide access to the Galley settings page. From this page you can configure the SNS DATA MANAGEMENT, FILTER, TAGS, and Face tag. Section 6: Multimedia 45 DRAFT Internal Use Only Sharing Pictures Pictures are the best way of remembering the moment, but an even better treat is to share them with others. Your device can quickly share a picture without using email or messaging. S Beam Transfer uses the NFC (near Field Communication) feature found on your device to transmit large files directly to another compatible device by direct touch. This method of image transfer requires NFC and S Beam to be enabled prior to use. Using S Beam to Share Pictures This feature (when activated via NFC) allows you to beam large files directly to another compatible device that is in direct contact. These files can be larger, such as Videos, HD pictures, and other large files.You can beam images and videos from your gallery, music files from your music player, and more. 1. From the Home screen, tap NFC. 2. If not already active, in a single motion touch and slide the NFC slider to the right to turn it on. 3. Tap S Beam and make sure the feature is turned on. 4. If not already active, in a single motion touch and slide the S Beam slider to the right to turn it on. 5. On the source device (containing the desired image or video), tap 6. Locate and tap the selected image to open it in the preview window. Settings g Apps g Apps g Gallery. Important! Neither device must be in Lock mode or displaying the Lock screen. They must both be active and unlocked. It is recommended that the target device be on the Home screen. 7. Place the two active NFCenabled devices back to back to begin. Note: If the Touch to beam screen does not appear on the source device:
- Pull them apart
- Verify the image is visible in the preview window on the source device (providing the file)
- Place them together again 8. From the Touch to beam screen, tap the reduced image preview to begin the transfer. After a few seconds
(depending on file size) the recipient with then see the transferred file displayed on their screen. To share multiple pictures via S Beam:
1. On the source device (containing the desired image or video), tap 2. Locate the selected folder. 3. Touch and hold the first image and place a check mark on it and all desired images. 4. Place the two active NFCenabled devices back to back to begin. 5. From the Touch to beam screen, tap the reduced image preview to begin the transfer. 6. When prompted, separate the two devices. Apps g Gallery. Camera Gallery Options The Gallery is where you can access the Gallery of stored camera images. 1. From the Home screen, tap 2. Select a folder location (ex: Camera) and tap an image to open it. Apps g Gallery. or Touch and hold an image to place a check mark on the file and select multiple files. or Tap the upperright camera to begin taking pictures that are placed in this folder. 46 Sharing a Gallery Image to a Target Device Important! Make sure all communicating devices are connected to the same Wi-Fi. 1. Launch Samsung Link on the target device (such as an Internet TV, Samsung Tablet, etc..). 2. From the Home screen, tap Gallery. Apps g Note: You must be signed in to your Samsung Account before you can use this feature. 3. Open a selected image. 4. Tap 5. On a target device (ex: Internet TV) select the Stream to connected devices and select an available target device to begin streaming. onscreen Allow button to continue. Note: At this stage your device is requesting access to share media with the external source. 6. Confirm AllShare Controller enabled appears in the Notification area at the top of the device to indicate you are using your device as the media source. Assigning an Image as a Contact Photo Gallery. Apps g 1. From the Home screen, tap 2. Select a folder location and tap a file to open it. 3. With the image displayed, tap 4. Tap a contact to make a selection. 5. Use the onscreen crop the image by dragging it around or out from its corners. 6. Tap Done to store the new image. Assigning an Image as a Wallpaper Menu and then tap Set as g Contact photo. 1. From the Home screen, tap 2. Select a folder location and tap a file to open it. 3. With the image displayed, tap 4. Select one of the these options:
Apps g Gallery. Menu and then tap Set as. Home screen: Assigns the current image to the home screen background. This image is spread across all available screens. Lock screen: Assigns the selected image to the background for the lock screen. Home and lock screens: Assigns the current image to both the Home screen and Lock screens. Wallpaper: Assigns the current image as a wallpaper. 5. Touch and drag the crop box anywhere on the picture. Touch and drag the sides of the crop box to zoom in or out to create a cropped area. 6. Tap Done to assign the wallpaper image. or Tap Cancel to stop without updating the wallpaper image. DRAFT Internal Use Only Editing a Photo You can edit your photos using the builtin Photo editor application on your device. The photo editor application provides basic editing functions for pictures that you take on your phone. Along with basic image tuning like brightness, contrast, and color it also provides a wide variety of effects used for editing the picture. 1. From the Home screen, tap 2. Select a folder location and tap a file to open it. 3. With the image displayed, tap Menu and then tap Edit. Apps g Gallery. Edit: allows you to edit the current image. Note: To select the picture area, touch and hold the current picture. 4. Tap Download to follow the onscreen installation instructions. If prompted, log into your Samsung account. The Gallery The Gallery is where you view photos and play back videos. For photos, you can also perform basic editing tasks, view a slideshow, set photos as wallpaper or caller image, and share as a picture message. Note: If the phone displays a memory full message when accessing the Gallery, access Files and remove some of the media files from the folders, and then open the Gallery. Opening the Gallery From the Home screen, tap Apps g Gallery. For more information, refer to Camera Gallery Options on page 46. Note: If you stored your files in folders (directories) on the storage card, Gallery displays these folders as separate albums. The top left album contains all the pictures in the storage card. Viewing a Video within the Gallery Apps g 1. From the Home screen, tap 2. Locate your folder and video. 3. Tap For more information on using the PictureinPicture feature for video playback, see Using Picture-In-Picture on page 60. Play to playback your video. Gallery. Section 6: Multimedia 47 DRAFT Internal Use Only Section 7: Applications and Development This section contains a description of each application that is available in the Applications Menu, its function, and how to navigate through that particular application. If the application is already described in another section of this user manual, then a cross reference to that particular section is provided. Help: Takes you to the indevice Help application. Home to return to the Home screen. 3. Press Accessing Recently Used Applications Note: This manual only addresses applications that have been loaded on your device as of the date of purchase. Information concerning third party applications that you may choose to download from the Google Play Store or otherwise should be obtained from the application provider directly. Tip: To open applications quickly, add the icons of frequently-used applications to one of the Home screens. For more information, refer to Customizing the Screens on page 16. You can also add an application icon as a Primary Shortcut that will display on all Home screens. If you add an application as a primary shortcut, the application icon will not be displayed in the Applications menu. Applications The Applications screens provide quick access to all the available applications on the device. The Application menu provides quick access to the most frequently used applications. Applications display on each of the panels on the Applications screens. Important! Once you log into your Google account. All previously downloaded apps should now be populated within the Application screens. Application Screen Menu Settings When on the Apps screen, the following menu options are available:
1. Press 2. Tap Menu and then select from the following options:
Home and then tap Apps. Edit: Allows you to organize your current applications by moving them around the screen, edit or delete existing Apps folders. Create folder: Allows you to create an application folder where you can better organize and group desired apps. View as: Allows you to customize the way the Apps menu listing is shown. Choose from: Customizable grid or Alphabetical grid. Downloaded apps: Displays any installed packages or applications from the Play Store that are taking up memory space. 1. Press Recent from any screen to open the recentlyused applications window. 2. Tap Active Apps Manager to open the selected application:
RAM STATUS graphically displays both the current amount of available and used memory. ACTIVE APPLCIATIONS displays a listing of currently active services and applications. End to close a targeted service or application. End all to close all currently running services or applications. 3. Tap End All to both close any active service/application and delete the record of all recently used applications. Shutting Down an Currently Active Application Press or Recent and then tap End All. Press End all to close all background running applications. Recent and then tap Active Apps Manager tab g End (to close selected applications) or Amazon This mobile application provides a user with access to the online Amazon website. 1. From the Home screen, tap Amazon. 2. Log in to the site and follow the onscreen instructions. Apps g Calculator Using this feature allows you to use your device as a calculator. The calculator provides the basic arithmetic functions; addition, subtraction, multiplication, and division. You can also use this as a scientific calculator. 1. From the Home screen, tap 2. Enter the first number using the numeric keys. 3. Enter the operation for your calculation by tapping the Plus, Minus, Multiplication, or Division key. 4. Enter the next number. 5. To view the result, tap the = (equals) key. 6. Repeat steps 1 to 4 as many times as required. Calculator. Apps g Uninstall/disable apps: Allows you to uninstall or disable selected applications. Userdownloaded apps will Note: Place the screen in Landscape mode to reveal additional scientific functions. be uninstalled, but core applications can only be disabled. Tap to remove the selected app. Hide apps: Allows you to temporarily hide selected apps within your Applications screens. Once selected, tap Done to complete the action. Show disabled apps: Allows you to reenable previously disabled applications for viewing in this menu. Once you have selected the apps, tap Done. Show hidden apps: Allows you to unhide any previously hidden applications. Once selected, tap Done to complete the acton. GALAXY Essentials: Takes you to a page from where you can download applications that are both compatible with and designed to enhance your device. 48 DRAFT Internal Use Only Calendar With this feature, you can consult the calendar by day, week, or month, create events, and set an alarm to act as a reminder. Google Calendar is built into the phone and synchronizes both new and existing entries between your phone and your online Google account. Important! You should previously add an account (Facebook, Microsoft Exchange ActiveSync, or Google) prior to using the Calendar. 1. From the Home screen, tap 2. Tap Apps g Calendar. Options to reveal the following options along the left side of the display:
Year: displays the Year view. Month: displays the Month view as an onscreen popup. Month and agenda: displays both the Month view with an area of the screen listing your upcoming events. Week: displays the Week view. Day: displays the Day view. Agenda: displays the upcoming events in a List view. 3. Tap Create event to create a new Calendar event. or Tap Today to display the current date indicated by a blue box, then tap following options:
Go to: displays a specific date. Delete: allows you to delete All events, All events before today, or an individual event. Search: allows you to search within your current events. Calendars: synchronizes your current calendar events with your available accounts (such as Gmail, Menu and select one of the Microsoft Exchange ActiveSync, etc..). Sync: allows you to synchronize your calendar events from across multiple accounts. Settings: displays a list of configurable settings. Creating a Calendar Event 1. From the Home screen, tap 2. Within the Year, Month, Week, and Day views, Apps g Calendar. Create event to create a new Calendar event. Calendar Settings Using the Calendar settings you can select the day with which you want the calendar to begin. You also select how you want to view the calendar, by Month, Week, or Day or determine how to manage events, notifications, sounds, and defaults reminders. 1. From the Calendar screen, tap 2. Tap First day of week and select either Locale default, Saturday, Sunday or Monday. 3. Tap Show week numbers to display the week numbers along the side of the week entries. 4. Tap Hide declined events to activate this option. A check mark indicates a selection. 5. Tap Hide completed tasks to activate this option. A check mark indicates a selection. 6. Tap Weather to activate this option. A check mark indicates selection. 7. Tap Lock time zone to lock event time based on your current userselected time zone. Menu g Settings. Select a time zone from within the Select time zone field. Select a fixed time zone for display (a default) from within the View today according to field. Choose from Fixed time zone or Local time zone. 8. Tap Select alert type to adjust the Status bar event notification method. Choose from: Sound alerts, Status bar notifications, and Off. 9. Tap Notification sound to assign a ringtone to a calendar event notification. 10. Tap Vibration to assign a vibration notification to this event. 11. Tap Quick responses to edit your default quick responses for outbound emails. These are default responses similar to those used by text templates. Camera Use your camera feature to produce photos in a JPEG format. The Camcorder shoots High Definition video in an MP4 format. Note: A microSD card is no longer necessary before you take pictures or shoot video. It is recommended that you confirm your default storage location for images and videos. Apps g From the Home screen, tap For more information, refer to Using the Camera on page 43. ChatON Provides a global mobile communication service where you can chat with more than 2 buddies via a group chat. Share things such as pictures, videos, audio, Contacts, Calendar entries, and Location information. Camera. Important! The Samsung account manages the access information (username/password) to several applications, such as ChatON. For more information, visit: https://web.samsungchaton.com. Registering with the Service 1. Confirm you have already logged in to your Samsung account. 2. From the Home screen, tap 3. If prompted to connect via a mobile network, tap Connect. 4. If prompted, review the Terms and conditions, Privacy policy, and tap Accept to continue. 5. Tap Sign in to log into your Samsung account Apps g ChatON. or Tap Skip to continue without logging in. 6. Read the onscreen notification about data charges and tap OK. 7. Select a country code, enter your current phone number to register with the service, and tap Register. 8. Choose to receive the verification code via either SMS (text message) or Voice (answering machine call) to your device. Note: If you opt to receive the verification code via SMS, this information is sent directly to your device. Once received, the Verification field is automatically filled in. 9. Enter your name and tap Get started. Section 7: Applications and Development 49 DRAFT Internal Use Only
This product uses the FCC Data API but is not endorsed or certified by the FCC