| submitted | available | document details (if available) | source link |
|---|---|---|---|
| July 14 2011 | July 14 2011 | iW1 IB v2 Adobe PDF library 9.90 |
| various | Users Manual | Users Manual | 1.20 MiB | July 14 2011 |
works with iHome Connect Wi-Fi Network Setup app iHome+Sleep FREE alarm clock app iHome+Radio FREE alarm clock app available on the App Store works with iW1 User Manual AirPlay wireless speaker system with rechargeable battery English www.ihomeaudio.com Welcome to the iHome iW1 Thank you for choosing iHome. The iHome Air Series marks a new frontier of product oerings that embrace Wi-Fi connectivity and AirPlay, Apples new wireless streaming technology. The iHome iW1 with AirPlay oers the latest experience in home audio entertainment allowing users to stream digital audio over Wi-Fi from iTunes, iPad, iPhone and iPod touch. Featuring Bongiovi Acoustics DPS technology and built-in rechargeable lithium-ion battery, the iW1 enables both delity audio that is truly wireless. You can use the iW1 to:
Play audio directly from iTunes on your Mac or PC using your home Wi-Fi network Stream your favorite music from your iPad, iPhone, or iPod touch from your iPod library or popular music apps like PANDORA and iheartradio, available on the App Store Dock, charge, and play audio with your iPhone and iPod with included USB sync cable Enjoy true wireless audio anywhere around the house with the iW1s rechargeable battery, convenient charging base and carrying handle Add Multiple iW1 speakers to enjoy multi-room audio anywhere in the home Download and enjoy iHome+apps available on the App Store:
- iHome+Sleep, a free music alarm clock app
- iHome+Radio, a internet radio music app
- iHome Connect, a network setup app for iHome AirPlay enabled products Keep reading to discover everything you need to know to get the most from your iHome iW1. English 2 iW1 Overview Contents 1. iW1 speaker 2. Charging base 3. Power adaptor 4. USB sync cable 5. Remote control 6. Document pack Start Guide bass treble reset Rz10 charging base power adaptor remote USB sync cable iW1 Speaker Compatibility USB connector works with:
iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone 4, iPhone 3GS, and iPhone 3G. AirPlay works with:
iTunes, iPod touch (2nd, 3rd, and 4th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPad 2, and iPad. For AirPlay, the iW1 must be connected to Wi-Fi with networked access to a Mac or PC running iTunes 10.1 or later; or an iPad, iPhone, or iPod touch running iOS 4.2 or later. iHome Apps:
iHome+Sleep and iHome+Radio, and iHome Connect apps only work with iPad, iPhone, iPod touch and requires iOS 4.0 or later Maintenance Place the unit on a level surface away from sources of direct sunlight or excessive hear. Protect your furniture when placing your unit on a natural wood and lacquered nish. A cloth or other protective material should be placed between it and the furniture. Clean your unit with a soft cloth moistened only with mild soap and watre. Stronger cleaning agents, such as Benzene thinner or similar materials can damage the surface of the unit. English 3 Quick Start Connect, Charge, & Power On 1 Connect to power source 2 Place iW1 on charging base 3 Turn master power switch ON 4 Press power button outlet 12V battery power aux-in iPod dock reset o | on battery iPod Local Audio Mode 1 Dock iPod/iPhone using iPod USB sync cable
(iPod and aux-in play in parallel) 2 Press for iPod mode battery power aux-in iPod dock reset status network setup o | on power network setup status o | on allow 30s for the iW1 to startup 3 Press buttons on the iW1 or iW1 remote, in iPod mode, to control your iPod music. Adjust volume by swiping:
Note: Use iPod mode for both iPod docking and Aux-in audio playback. AirPlay Wireless Audio Mode (visit pages 8-9 for Wi-Fi network conguration) 1 Press for AirPlay wireless mode 2 3 Verify that your iW1 speaker is successfully connected to your Wi-Fi network.
(visit page for connecting your iW1 speaker to your Wi-Fi network) Launch iTunes or use your iPad, iPhone, iPad touch. Verify iW1 and AirPlay source device is on same Wi-Fi network. status network setup status network setup battery power aux-in iPod dock reset status network setup battery power aux-in iPod dock reset status network setup o | on o | on Connected Not Connected AirPlay Wireless Audio Mode 4 Select the iHome iW1 as your AirPlay audio speaker 5 Press buttons on the iW1 or use your iTunes, iPad, iPhone, or iPod touch controls directly. Adjust volume on the iW1 or wirelessly control volume on your AirPlay source device. Look for the AirPlay logo to select your speaker English AirPlay only works with iPod touch, iPhone, iPad, or iTunes (Mac or PC)
!
Note: for AirPlay streaming:
iPad, iPhone, and iPod touch support point-to-point audio streaming to one AirPlay enabled speaker. iTunes supports point-to-multipoint audio streaming to up to three AirPlay enabled speakers (performance depends on your Wi-Fi network and environment). 4 iW1 Controls Power AirPlay wireless mode
(audio via iOS device or iTunes) iPod mode
(audio via USB sync cable or aux-in) TOP PANEL Volume / Battery level iPod and iTunes music controls battery power aux-in iPod dock reset status network setup o | on Status LED OFF when battery is fully charged Green when touching a button on unit/remote Green, blinking when volume is muted Amber, solid when battery is charging Red, blinking when battery needs charging Aux-in REAR PANEL Battery preview o | on battery power aux-in iPod dock reset status network setup Firmware reset/status LED Wi-Fi network setup Master power switch USB iPod docking
(audio & charging) REMOTE Wi-Fi network status LED Master power is OFF Green, solid when connected to a Wi-Fi network Red, blinking when NOT connected to a Wi-Fi network Mode and power control Volume mute Bongiovi DPS turn DPS audio enhancement on/o EQ reset return eq setting to default Volume and music controls iPod shue & repeat music playback controls bass treble reset Bass and treble adjustment default is 0 for both bass and treble Rz10 NOTE: Be sure the remote battery is properly installed before using the iW1 remote control English 5 Getting Started Master Power Switch The iW1 has a master power switch that is used to power the unit ON or OFF, help conserve battery life, and reset the iW1 speaker. In order for the iW1 speaker to power ON, the battery must be charged or unit must be connect to a AC outlet. power Master Power ON - Slide the Master Power Switch to the ON position (on rear panel) to activate your iW1 speaker. Master Power OFF - Slide the Master Power Switch to the OFF position to power the iW1 speaker OFF. o | on Note: The iW1in the Master Power OFF state will only allow charging of the iW1s internal battery and will not support iPod/iPhone charging, remote control commands, AirPlay, network setup, nor Firmware Updates. Powering your iW1 speaker ON To power the iW1 speaker ON:
1. Plug AC adaptor into Charging Base, and plug into a live AC wall outlet. 2. Place the iW1 Speaker on top of the Charging Base. 3. Slide the Master Power Switch to the ON position (on rear panel). Note: Allow 30 seconds for the speaker to startup before interacting with the iW1 speaker. 4. Press the Power button to switch between power ON and Standby mode. The iW1 speaker will power ON to the last state. 1 outlet 12V 2 3 4 battery power aux-in iPod dock reset status network setup o | on battery power o | on Rechargeable Battery The iW1 speaker has an internal rechargeable battery and supports audio playback any where in the home when the battery is charged or docked on its charging base with an AC adaptor. 30s for startup press to exit Standby mode To Charge the Battery:
1. Plug AC adaptor into Charging Base, and plug into a live AC wall outlet. 2. Dock iW1 Speaker on top of Charging Base. To view the Battery level status:
Press the Battery Preview button to view the charge status of the iW1s internal battery on the top volume control panel. Battery Level Preview Current battery status level will show in place of volume level Status LED OFF when battery is fully charged Amber, solid when battery is charging Red, blinking when battery needs charging English 6 Using your iW1 Capacitance top panel controls The iW1 speaker has a backlit capacitance touch panel control interface for power, mode, volume, and music controls. Controls will be lit according to the status of the iW1 speaker and the selected mode. Note: Moisture and wet hands will cause issues with the ability of the iW1 to detect user interactions. Each control will ash once when pressed. TOP PANEL Power AirPlay wireless mode
(audio via iOS device or iTunes) iPod mode
(audio via USB sync cable or aux-in) Standby mode Standby Mode (master power switch is ON):
Volume / Battery level iPod and iTunes music controls Press the Power button to place the iW1 speaker in standby mode and stop audio playback. The Power button will pulse on/o to indicate the unit is in standby mode. Power ON modes iPod Mode (iPod/iPhone detected via USB dock connector):
iPod Mode (iPod/iPhone not detected via USB dock connector):
AirPlay Wireless Mode (connected to a Wi-Fi network):
AirPlay Wireless Mode (not connected to a Wi-Fi network):
Note: The AirPlay Wireless button will continuously ash on/o to indicate that the iW1 is not linked to a network when ON and in AirPlay Wireless mode. Volume Press a specic volume level or slide your nger to the preferred volume level when changing the IW1 speakers volume on the unit. vol. = 0%
50%
100%
English 7 Wi-Fi Network Setup for AirPlay Check list Please verify the following steps before attempting to connect your IW1 speaker to a Wi-Fi network:
To enjoy AirPlay wireless audio, you must have the following:
- iTunes or an iOS device (iPod touch, iPhone, or iPad).
- A functioning home network with Wi-Fi. Download the latest software updates for iTunes and your iOS device to ensure that you are able to enjoy the latest AirPlay enhance-
ments and compatibility. Download the iHome Connect app for iPod touch, iPhone and iPad. Have your Wi-Fi network name (SSID) and password (if applicable) available for reference. Note: AirPlay requires iTunes 10.1 (Mac and PC) or later; OR an iPad, iPad 2, iPhone 4, iPhone 3GS, iPod touch (4th, 3rd, and 2nd generations) with iOS 4.2 or later. The iHome Connect app requires iOS 4.0 or later. Option A - Connecting with your iPod touch, iPhone, or iPad (Recommended) If you have an iPod touch, iPhone, or iPad with iOS 4.0 or later, we recommend that you use our free iHome Connect app for the quickest network setup experience. 1 To connect your iW1 speaker to a Wi-Fi network using an iOS device, follow these steps:
1. Dock your iOS device to the iW1 using the included iPod USB sync cable. 2. Download our free iHome Connect app from the App Store and launch the app. 3 3. Select your preferred Wi-Fi network from the list of available networks and enter password if prompted. 4. Rename your iW1 speaker and press Save. Note: Connecting to a network may take up to 60 seconds. Success!
Congratulations, you have successfully connected your iW1 to your wireless network and now you can start enjoying wireless audio anywhere in your home or oce. Verify that the Network Status LED is green and then keep reading to learn how to use the iW1 and control your iTunes and iOS audio content using AirPlay. 4 status network setup status network setup Connect 10:09 PM Wi-Fi Name Not Connected iHome iW1 2E33 Model: iHome iW1 Firmware: 31.1.0 How to use AirPlay About iHome Connect 10:09 PM battery power aux-in iPod dock reset status network setup o | on 10:09 PM Settings Wi-Fi Networks Choose a Network for iW1... Your Wi-Fi Network Other Wi-Fi Network Other Wi-Fi Network Other Wi-Fi Network Other Wi-Fi Network Choose your Wi-Fi network from the available networks and wait as the iW1 attempts to connect. 30s 10:09 PM Name Cancel Save Wi-Fi Name Your Wi-Fi Network iHome iW1 2E33 Model: iHome iW1 Firmware: 31.1.0 How to use AirPlay About iHome Connect Livingroom Speaker This name will be displayed when selecting your speaker from a list of available AirPlay devices. Q W E R T Y U I O P A S D F G H J K L Z X C V B N M battery power aux-in iPod dock reset status network setup o | on battery power aux-in iPod dock reset status network setup o | on Problem?
Connected Not Connected Note: To begin using AirPlay wireless streaming, your AirPlay source devices (Mac or PC with your iTunes library as well as your iPod touch, iPhone or iPad) must be connected to the same Wi-Fi network that the iW1 speaker is connected to. English Reset the iW1 Speaker:
- Unplug the AC jack/remove the iW1 from the charging base
- Slide the rear Power Switch to the OFF and then ON position
- Reconnect AC jack, place iW1 on charging base and wait 30s
- Repeat iW1 Wi-Fi Network Setup process if necessary 8 Wi-Fi Network Setup continued... Option B - Connecting with your Mac or PC over Wi-Fi To connect your iW1 speaker to a Wi-Fi network using a Mac or PC, follow these steps:
1. iW1 Hardware Reset:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base, and wait 30 sec. 2. Press and hold (5 sec.) Network Setup button on the back of unit. Note: The Network Status LED will begin ashing green and the top control panel will also ash. 3. On your Mac or PC, select the network called "iHome Setup XXXX"
from Wi-Fi network settings. Note: This process can take up to 2 minutes. Be patient and refresh your network list if necessary. 4. Launch a web browser (ex. Safari or Explorer) and enter http://169.254.1.1 in the address bar. Note: If the page is not initially available or becomes unresponsive, reload the page. See troubleshooting if problem persists. 5. Rename the iW1 speaker and click Save. (optional) 6. Select preferred Wi-Fi network from the list of available and click Join Network. Note: Connecting to a network may take up to 60 seconds. Success!
Congratulations, you have successfully connected your iW1 to your wireless network and now you can start enjoying wireless audio anywhere in your home or oce. Verify that the Network Status LED is green and then keep reading to learn how to use the iW1 and control your iTunes and iOS audio content using AirPlay. status network setup status network setup battery power aux-in iPod dock reset status network setup o | on battery power aux-in iPod dock reset status network setup o | on Connected Not Connected Note: To begin using AirPlay wireless streaming, your AirPlay source devices (Mac or PC with your iTunes library as well as your iPod touch, iPhone or iPad) must be connected to the same Wi-Fi network that the iW1 speaker is connected to. status network setup battery power aux-in iPod dock reset status network setup o | on upper right corner of Mac screen lower right corner of PC Screen 45s 45s http://169.254.1.1 Network Setup Device Name This name will be displayed when selecting your speaker from a list of available AirPlay devices. 1st - customize the name of your speaker 15s iHome iW1 Save 2nd - Select your Wi-Fi network from list 30-120s Current Network:
Connect the iW1 speaker to the same network as your AirPlay source (iTunes, iPad, iPhone, or iPod touch(. Available Networks Join Network View Network Details Problem?
Reset the iW1 Speaker:
- Unplug the AC jack/remove the iW1 from the charging base
- Slide the rear Power Switch to the OFF and then ON position
- Reconnect AC jack, place iW1 on charging base and wait 30s
- Repeat iW1 Wi-Fi Network Setup process if necessary English 9 Music Connectivity Connecting to the iW1 speaker You can connect to your iHome iW1 speaker three dierent ways:
1. Using AirPlay to stream wirelessly from iTunes or your iPad, iPhone, and iPod touch. 2. Using the USB iPod docking port on the rear panel with a iPod USB sync cable for audio and charging your iPod or iPhone. 3. Using an auxiliary audio device (mp3 or CD player) connected to the aux-in port on the rear panel. AirPlay & iPod touch, iPhone, or iPad Using an iOS device:
1. 2. 3. Connect your iOS device to the same Wi-Fi network as iW1. Go to Settings --> Wi-Fi on your iOS device. Tap on iPod/Music app, look for the AirPlay button next to the iPod music transport controls. Tap on the AirPlay icon and choose iW1 from the list of speakers. If the iW1 speaker is not available, restart your iOS device and verify that the iW1 is powered on. Press play. 4. AirPlay & iTunes Using a Mac or PC with iTunes:
1. 2. 3. Connect your Mac or PC to the same Wi-Fi network as iW1. Open iTunes on your computer. Within iTunes open Preferences, Select the Devices tab, and activate the following option:
Allow iTunes control from remote speakers Click OK, close iTunes preferences. Look for the AirPlay icon in the bottom right corner of the iTunes window. Click the AirPlay icon and choose iW1 from the list of speakers. Click "Multiple Speakers..." to select additional AirPlay speakers. If the iW1 speaker is not available, restart iTunes and verify that the iW1 is powered on. Press play. 4. 5. 6. 7. AirPlay Wireless Audio Mode Enjoy AirPlay audio anywhere:
1. Press to exit standby mode and power the iW1 ON. 2. Press for wireless audio mode and listen to AirPlay music. 3. Use buttons on the iW1 or iW1 remote to control streaming AirPlay content. Local iPod Audio Mode Dock, Charge, & Play using iPod USB sync cable or dock:
1. Connect USB sync cable to iW1s USB port. 2. Press Local Playback mode button and enjoy iPod and iPhone charging and audio playback. 3. Using buttons on the iW1 or iW1 remote, in iPod mode, will control your iPod music. Note: Use iPod mode for both iPod docking and Aux-in audio playback. English 10 Control BonGiovi DPS The iW1 uses a DSP solution provided by BonGiovi Acoustics. This function is on by default and can only be turned o or on with the IR remote. Front Status LED will ash Green when DSP is turned OFF or ON via the remote and then return to last status settings. EQ The iW1 has a EQ feature that is controlled via the remote, that adjusts Bass and Treble. TREBLE +/- buttons: Adjust treble levels between -5 and +5. Default is 0 BASS +/- buttons: Adjust treble levels between -5 and +5. Default is 0 NOTE: The Front Status LED will ash Green 3 times when the eq reaches maximum or minimum and then return to last status settings. RESET button (remote): Resets EQ adjustments to the following state: Bass:0, Treble0. NOTE: When Reset button is pressed, Top Panel LEDs will ash 2 times and then return to last status settings. Firmware update iW1 Speaker Firmware Updates As changes to AirPlay are made over time and new devices are introduced that support AirPlay audio, it may be necessary to update the rmware of your iW1 speaker to ensure the latest compatibility and optimal functionality. The iW1s rmware can be updated using a USB Mass Storage device containing a new rmware image downloaded by the user from ihomeaudio.com Using a USB Mass Storage device:
1. Download the latest rmware from www.ihomeaudio.com/airplay/support to your computer 2. Load downloaded rmware to a USB mass storage device. 3. Connect USB device 4. Press & Hold (3 sec). 5. iW1 will scan for rmware le local to the USB device. If a valid rmware le is found, iW1 rmware will update. If no valid rmware is found user must reset the iW1, load the proper le on USB stick, and attempt Firmware update again. During Firware Update:
When Firmware is being Updated, All top panel controls will PULSE and be inactive. All buttons are inactive except for Reset button. If rmware update is succcessful, a conrmation (positive) tone will sound. English 11 Troubleshooting Problem I am unable to connect the iW1 to my home Wi-Fi network. Solution 1. 2. 3. Verify that your Wi-Fi network is functioning. Move the iW1 closer to your network access point; the Wi-Fi signal is weak or the iW1 is out of range of your Wi-Fi network. iW1 Hardware Reset:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base and wait 30 sec. for the iW1 speaker to restart. Ive successfully connected the iW1 to my home network, but I cannot select the iW1 speaker from iTunes or my iOS Device. 1. 2. 3. The iW1 speaker must be on the same Wi-Fi network as your AirPlay source. Verify you have the latest version of iTunes and/or iOS. Try restarting iTunes or your iOS device. Note: The original iPhone, iPhone 3G, and iPod touch (1st gener-
ation) do not support AirPlay. Ive selected the iW1 speaker as my AirPlay audio source, but I do not hear any music. 1. 2. 3. Verify that the volume is not muted or set to 0. Verify that there is not another iTunes library or iOS device connected to the iW1 speaker. Try restarting iTunes or your iOS device. The iW1 doesnt respond or doesnt turn ON. 1. 2. Verify that the adaptor is connected and the power outlet is always live (not controlled by a wall switch). iW1 Hardware Reset:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base and wait 30 sec. Questions? Visit www.ihomeaudio.com English 12 Consumer Product Safety Guide Safety Instructions FCC Radiation Exposure Statement FCC Radiation Exposure Statement 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Water and Moisture The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the ow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including ampliers) that produce heat. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. Cleaning The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. Overloading Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of re or electric shock. Damage Requiring Service The unit should be serviced by qualied service personnel when:
A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. Antenna Do not connect an external antenna to the unit (other than that provided). Periods of None Use If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. Servicing The user should not attempt to service the unit beyond those methods described in the users operating instructions. Service methods not covered in the operating instructions should be referred to qualied service personnel. FCC ID: EMOIW1. IC: 986B-IW1 FCC ID: EMOIW1. IC ID: 986B-IW1 This equipment complies with FCC RF radiation exposure limits set forth for an This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled uncontrolled environment. This transmitter must not be co-located or operating in environment. This transmitter must not be co-located or operating in conjunction with any conjunction with any other antenna or transmitter. other antenna or transmitter. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two This Device complies with RSS-210 of the IC Rules; Operation is subject to the conditions:
1. This device may not cause interference and following two conditions:
2. This device must accept any interference received, including interference that may cause undesired operation 1. This device may not cause interference and 2. This device must accept any interference received, including interference that may cause This device complies with FCC radiation exposure limits set forth for an uncontrolled undesired operation environment and it also complies with Part 15 of the FCC RF Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device This equipment complies with the limits for a Class B digital device as specied in Part must accept any interference received, including interference that may cause undesired 15 of FCC Rules. These limits provide reasonable protection against radio and TV operation. (FCC15.19) interference in a residential area. However, your equipment might cause TV or radio Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne interference even when it is operating properly. To eliminate interference you can try doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage one or more of the following corrective measures:
radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Reorient or relocate the receiving antenna. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and Increase the distance between the equipment and the radio or TV. compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure Use outlets on dierent electrical circuits for the equipment and the radio or TV. and compliance. Consult your dealer or an experienced radio/television technician if the problem still exists. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information Modifying or tampering with your systems internal components can cause a canadienne sur l'exposition et la conformit de rf. malfunction and might invalidate the systems warranty and void your FCC This equipment complies with the limits for a Class B digital device as specied in Part 15 of FCC authorization to operate it. Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is This Class B digital apparatus complies with Canadian ICES-003. operating properly. To eliminate interference you can try one or more of the following Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. corrective measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the radio or TV. Use outlets on dierent electrical circuits for the equipment and the radio or TV. Consult your dealer or an experienced radio/television technician if the problem still exists. Modifying or tampering with your systems internal components can cause a malfunction and This device uses an internal rechargeable lithium-ion battery that should last the might invalidate the systems warranty and void your FCC authorization to operate it. lifetime of the device. If you suspect your battery may be dead, try charging it several This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la times. If the battery does not recharge, please contact us for repair information. classe B est conforme la norme NMB-003 du Canada. WARNING/DISPOSAL OF UNIT Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the Please do NOT attempt to change the battery yourself. If the battery has died and you device. If you suspect your battery may be dead, try charging it several times. If the battery does do not want us to replace your battery, you should follow the disposal instructions not recharge, please contact us for repair information. below:
WARNING/DISPOSAL OF UNIT Never dispose of used batteries/electronics with ordinary solid wastes, since they Please do NOT attempt to change the battery yourself. If the battery has died and you do not contain toxic substances. want us to replace your battery, you should follow the disposal instructions below:
Always dispose of used batteries/electronics in accordance with the prevailing Never dispose of used batteries/electronics with ordinary solid wastes, since they contain community regulations that apply to the disposal of batteries/electronics. If there toxic substances. are no local regulations concerning battery/electronics disposal, please dispose Always dispose of used batteries/electronics in accordance with the prevailing community of the device in a waste bin for electronic devices. regulations that apply to the disposal of batteries/electronics. If there are no local Many electronics retailers now recycle batteries and other electronic compo-
regulations concerning battery/electronics disposal, please dispose of the device in a waste nents at no charge. Check to see which ones in your area do so. bin for electronic devices. Internal Rechargeable Lithium-ion Battery Many electronics retailers now recycle batteries and other electronic components at no CAUTION charge. Check to see which ones in your area do so. CAUTION The battery used in this device may present a risk of re, explosion or chemical burn if mistreated. The battery used in this device may present a risk of re, explosion or chemical burn if mistreated. Never use or charge the battery if it appears to be leaking, discolored, deformed, Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any or in any way abnormal. way abnormal. Never disassemble the unit or attempt to remove battery as that could cause Never disassemble the unit or attempt to remove battery as that could cause leakage of leakage of alkaline solution or other electrolytic substance. alkaline solution or other electrolytic substance. Always confirm that the temperature is 5C 35 C (41 - 95 Fahrenheit) before you charge Always conrm that the temperature is 5C 35 C (41 - 95 Fahrenheit) before the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. you charge the battery. Leakage or deterioration of the battery may occur if this Never expose the battery to any liquid. warning is not heeded. Never expose the battery to excessive heat such as direct sunlight or fire. Never expose the battery to any liquid. Never use the battery pack in an unventilated vehicle where excessive internal tempera-
Never expose the battery to excessive heat such as direct sunlight or re. tures may be encountered. Never use the battery pack in an unventilated vehicle where excessive internal Always keep the battery out of the reach of infants and small children. temperatures may be encountered. Always keep the battery out of the reach of infants and small children. English 13 Disclaimer of Warranty:
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modied or repaired by unauthor-
ized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, computers, routers, CDs or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI Technologies or any of its aliates, contractors, resellers, their ocers, directors, shareholders, mem-
bers or agents be liable to you or any third party for any consequen-
tial or incidental damages, any lost prots, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractu-
ally binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product. Warranty Limited 1 Year Warranty Information iHome, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to rst return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $60.00 charge for handling, packing, return UPS/postage, and insurance). This decision is subject to verication of the defect or malfunction upon delivery of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase is $100.00. Before returning this product for service:
Before returning this product for service, please check our support section at www.ihomeaudio.com/support or call our customer service team to resolve any problems you may be experiencing. If service is still required:
1. 2. 3. 4. Pack unit in a well padded, heavy corrugated box. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $60.00 ($100.00 without proof of purchase). Send the unit prepaid and insured, to the Factory Service Center listed below. Consumer Repair Department SDI Technologies Inc. 1330 Goodyear Dr. El Paso, TX 79936-6420 Questions? Visit www.ihomeaudio/airplay/support.com Toll Free Customer Service: 1-877-446-6301 SDI Technologies 2011 All rights Reserved. English 14 www.ihomeaudio.com iW1 Safety Card -- Front June 14, 2011 material: 150gsm2, art paper, 1C + 1C iW1 Safety Card --
1C 1C iW1 Consumer Guide --
iW1 Safety Card -- back July 14, 2011 Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Water and Moisture The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. Heat The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. Cleaning The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Attachments Do not use attachments not recommended by the product manufacturer. Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. Overloading Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Damage Requiring Service The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged. B. objects have fallen into or liquid has been spilled into the enclosure. C. the unit has been exposed to rain. D. the unit has been dropped or the enclosure damaged. E. the unit exhibits a marked change in performance or does not operate normally. 12. 13. 14. Antenna Do not connect an external antenna to the unit (other than that provided). Periods of None Use If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion. Servicing The user should not attempt to service the unit beyond those methods described in the users operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. iW1 - Consumer Product Safety Guide FCC Radiation Exposure Statement FCC ID: EMOIW1 IC: 986B-IW1 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:
1. This device may not cause interference and 2. This device must accept any interference received, including interference that may cause undesired operation This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (FCC15.19) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'valuation dans la section 2.5 de RSS 102 et la conformit l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformit de rf. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference you can try one or more of the following corrective measures:
Reorient or relocate the receiving antenna. Increase the distance between the equipment and the radio or TV. Use outlets on dierent electrical circuits for the equipment and the radio or TV. Consult your dealer or an experienced radio/television technician if the problem still exists. Modifying or tampering with your systems internal components can cause a malfunction and might invalidate the systems warranty and void your FCC authorization to operate it. The separation distance between the equipment and the user shall not be less than 20 cm This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. July 14, 2011 Revised Questions? Visit www.ihomeaudio.com WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace your battery, you should follow the disposal instructions below:
Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices. Many electronics retailers now recycle batteries and other electronic components at no charge. Check to see which ones in your area do so. Printed in China iW1 06132011-0 Printed in China iW1 07052011-0 CAUTION The battery used in this device may present a risk of re, explosion or chemical burn if mistreated. Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. Always confirm that the temperature is 5C 35 C (41 - 95 Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded. Never expose the battery to any liquid. Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. Always keep the battery out of the reach of infants and small children.
This product uses the FCC Data API but is not endorsed or certified by the FCC