OC400 Interactive Services - Outdoor Camera User manual

Interactive Services -

Outdoor Camera IS-OC-1000 User Guide Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 Package Contents .............................................................................................................. 1 Features.............................................................................................................................. 1 LEDs................................................................................................................................... 2 CHAPTER 2 INITIAL INSTALLATION.............................................................................. 4 Requirements..................................................................................................................... 4 Procedure ........................................................................................................................... 4 CHAPTER 3 SPECIFICATIONS ........................................................................................... 6 Hardware features............................................................................................................. 6 Software features............................................................................................................... 7 Regulatory.......................................................................................................................... 9 Copyright 2010. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. i Chapter 1 Introduction 1 This Chapter provides an overview of the Outdoor Network Camera's fea-

tures and capabilities. Congratulations on the purchase of your new Outdoor Network Camera. The Outdoor Network Camera is a Water/Dust Proof device, which is used for home monitoring and security. Package Contents The following items should be included:

The Outdoor Network Camera Unit Antenna Power Adapter A Stand Default kit If any of the above items are damaged or missing, please contact your dealer immediately. Features Support Dust Proof and Water Proof IP65 Provide MPEG4 Simple Profile (up to 30fps) and Motion-JPEG video streams simultane-

ously (up to 30fps) Streaming resolution at VGA (640x480), QVGA (320x240) and QQVGA (160x120). Support Day /Night mode by auto IR switcher as well as 8 IR LED Low Light Sensitivity is 0.5 Lux without IR LED Low Light Sensitivity is 0.1 Lux with IR LED Support H/W Motion Detection by PIR Sensor. Support full duplex bi-directions audio with Echo Cancellation function Support IEEE 802.11b/g. Support Motion Detection by analyzing the video stream. Support user-defined HTTP CGI for the HTTP notification action. Image controlsAWB (Auto-White-Balance), AGC (Auto-Gain-Control), Contrast, Sharpness, Brightness, Image Quality, Time Stamp and Text Overlay, image flip and mir-

ror control. Alarm Event includes File upload via FTP, HTTP, email notification and FTP event recording. 1 Wireless Adapter User Guide LEDs Front-mounted LEDs The Outdoor Network Camera has 4 LEDs. Power Active Network / WPS On (Green)- Power On Off - Power Off Flashing - The device is rebooting. Off - No user is viewing the camera. Blinking - User(s) is viewing the camera. On (Green)- LAN connection established. Off - Wireless or LAN is not connected. Flashing (Green) - Data is being transmitted or received via the corresponding LAN (hub) port. On (Amber)- If the LED is on, the WPS is not processing success-

fully. Microphone Flashing (Amber) - WPS function is being processed. On - Microphone function is enabled. Off - Microphone function is disabled. 2 Introduction Rear Panel LAN Port RESET Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. Click this button to setup WPS Auto mode and pin mode, or reset all setting to factory default. After Reset switch is pressed, system will take following actions:

Press once (less than 3 seconds) under Wireless connection, system will be in WPS PBC model (Auto mode). Press and hold over 3 seconds (less than 10 seconds) under Wire-

less connection, system will be in WPS PIN code mode (8 digital, generated from last 3 byte of MAC address) Press and hold over 10 seconds, reset to manufacturer default value and reboot. POWER Switch Push the button down to power on the device Power Port Connect the supplied power adapter here. 3 Chapter 2 Initial Installation 2 This Chapter covers the software installation of the Outdoor Network Camera. Requirements Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. Procedure 1. Choose an Installation Site Select a suitable place to install the Outdoor Network Camera. 2. Connect LAN Cables Use standard LAN cables to connect devices to the LAN port on the Outdoor Network Camera. 4. Power Up Connect the supplied power adapter to the Outdoor Network Camera. Use only the power adapter provided. Using a different one may cause hardware damage. Push the Power switch down to turn on the device. 5. Check the LEDs The Power LED should be ON. 4 Initial Installation The Network LED should be ON (provided the PC is also ON.) 5 Chapter 3 Specifications 3 This Chapter provides specifications for the Outdoor Network Camera. Hardware features Feature CPU Flash ROM SDRAM LAN WiFi Indicators Description SC1100, ARM9 based, 32bit-192Mhz base clock Hardware MPEG-4 SP/MJPEG Encoders 4 Mbytes 32 Mbytes SDRAM DM9102H, Ethernet 10/100BaseT, Auto-MDIX, IEEE 802.11b/g standard Max 50m line of sight, with no interference External Antenna with 4.2dBi, water proof Power Green Active Network Green Green/ Amber Microphone Green Connectors Ethernet, RJ45 connector Reset Button, Tack switch Power on/off button DC Power, External Power Adapter Power Consumption 5V/2A, 10W, 100~240 VAC, Switching 2.5mm Phone Jack, 180 Degree Estimated 5W Audio Microphone/Speaker Bi-directional, built in mic and speaker Codec Audio option Built-in Speaker G.726 (ADPCM)/G7.11 (PCM) Software controlled on/off via web interface and firmware Audio recoding/playback 8 ohm, 1.5W 6 Appendix B - About Wireless LANs Built-in Microphone Image Sensor Image Sensor Lens Viewing Angle 6mm, 40 dB + 3db, >55dB Omni Vision OV7740 1/5 CMOS Sensor, Effective Pixels 640x480 (6m x6m pixels) F2.0 @ f1.8 Fixed Focus lens (board lens, 3P), 50cm infinity, 60 view angle 600 Viewing Angle Software features Operating System OS Management interface Linux Operating System Web based user interface DHCP Client Protocol Support TCP/IP, HTTP, HTTPS, IPv4, RTSP/RTP, RTCP, QoS, DHCP, NTP, FTP, SMTP, DNS, DDNS, UPnP, IGMP, ICMP, iControl API protocol compatible Video Video Compression MPEG4

MJPEG Resolution

640x480 (VGA)

320x240 (QVGA, system default)

160x120 (QQVGA) Frame Rate

MPEG4 max. 30fps

MJPEG max. 30fps 3GPP

160x120@15fps, M-PEG4 for mobile phone viewing Digital Zoom

4x Security

Password Protection, HTTPS encryption, IP address filtering, user access log Video verification Time Stamp

Text Overlay, 20 characters 7 Wireless Adapter User Guide Browser Support Internet Explorer 6 and above ActiveX Support ActiveX 8.0 and above Audio Audio Compression G.726 (16/32 Kbps), G.711 (64 Kbps) Sampling Rate Events Internal Motion Detection Trigger Triggered Action Pre/Post Alarm 8 KHz On board video pixel motion detection PIR trigger HTTP trigger Motion Detection File upload via FTP, HTTP and email notification, FTP event re-

cording support, PIR trigger, Yes, configurable E-Mail Client, For event trigger alert notification 8 Appendix B - About Wireless LANs Regulatory Regulatory Water-Proof IP65 EMI / EMC FCC, CA, RoHS, WEEE Safety UL2044 9 Wireless Adapter User Guide This device has been designed to operate with the antennas listed below, and having a maximum gain of [4.2] dB. Antennas not included in this list or having a gain greater than [4.2] dB are strictly prohibited for use with this device. The required antenna impedance is [50] ohms. 10