submitted | available | document details (if available) | source link |
---|---|---|---|
March 02 2016 | April 02 2016 |
various | Test Report (DTS) rev | Test Report | 1.58 MiB | March 02 2016 / April 02 2016 |
FCC Test Report (WLAN 2.4GHz) Report No.: RF151111D09 FCC ID: P27NA502 Test Model: NA502 Series Model: NA502xxxxxxxx, G450xxxxx, VeraPlusxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) Received Date: Nov. 11, 2015 Test Date: Nov. 13 ~ Dec. 18, 2015 Issued Date: Dec. 25, 2015 Applicant: Sercomm Corp. Address: 8F, No. 3-1, YuangQu St., NanKang, Taipei 115, Taiwan, R.O.C. (NanKang Software Park) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan
(R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF151111D09 Report Format Version: 6.1.1 Page No. 1 / 56 Table of Contents 4 3 Release Control Record .................................................................................................................................. 4 Certificate of Conformity ...................................................................................................................... 5 1 Summary of Test Results ..................................................................................................................... 6 2 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards ........................................................................................ 14 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Set Up ........................................................................................................................................ 18 4.1.6 EUT Operating Conditions ................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 Conducted Emission Measurement .................................................................................................. 32 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 32 4.2.2 Test Instruments ................................................................................................................................ 32 4.2.3 Test Procedures ................................................................................................................................. 33 4.2.4 Deviation from Test Standard ............................................................................................................ 33 4.2.5 Test Setup .......................................................................................................................................... 33 4.2.6 EUT Operating Conditions ................................................................................................................. 33 4.2.7 Test Results ....................................................................................................................................... 34 4.3 6dB Bandwidth Measurement ........................................................................................................... 36 4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 36 4.3.2 Test Setup .......................................................................................................................................... 36 4.3.3 Test Instruments ................................................................................................................................ 36 4.3.4 Test Procedure .................................................................................................................................. 36 4.3.5 Deviation fromTest Standard ............................................................................................................. 36 4.3.6 EUT Operating Conditions ................................................................................................................. 36 4.3.7 Test Result ......................................................................................................................................... 37 4.4 Conducted Output Power Measurement ........................................................................................... 39 4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 39 4.4.2 Test Setup .......................................................................................................................................... 39 4.4.3 Test Instruments ................................................................................................................................ 39 4.4.4 Test Procedures ................................................................................................................................. 39 4.4.5 Deviation from Test Standard ............................................................................................................ 39 4.4.6 EUT Operating Conditions ................................................................................................................. 39 4.4.7 Test Results ....................................................................................................................................... 40 4.5 Power Spectral Density Measurement .............................................................................................. 42 4.5.1 Limits of Power Spectral Density Measurement ................................................................................ 42 4.5.2 Test Setup .......................................................................................................................................... 42 4.5.3 Test Instruments ................................................................................................................................ 42 4.5.4 Test Procedure .................................................................................................................................. 42 4.5.5 Deviation from Test Standard ............................................................................................................ 42 Report No.: RF151111D09 Page No. 2 / 56 Report Format Version: 6.1.1 4.5.6 EUT Operating Condition .................................................................................................................. 42 4.5.7 Test Results ....................................................................................................................................... 43 4.6 Conducted Out of Band Emission Measurement .............................................................................. 46 4.6.1 Limits of Conducted Out of Band Emission Measurement ................................................................ 46 4.6.2 Test Setup .......................................................................................................................................... 46 4.6.3 Test Instruments ................................................................................................................................ 46 4.6.4 Test Procedure .................................................................................................................................. 46 4.6.5 Deviation from Test Standard ............................................................................................................ 46 4.6.6 EUT Operating Condition .................................................................................................................. 46 4.6.7 Test Results ....................................................................................................................................... 46 5 Pictures of Test Arrangements .......................................................................................................... 55 Appendix Information on the Testing Laboratories ................................................................................ 56 Report No.: RF151111D09 Page No. 3 / 56 Report Format Version: 6.1.1 Release Control Record Issue No. RF151111D09 Description Original release. Date Issued Dec. 25, 2015 Report No.: RF151111D09 Page No. 4 / 56 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Multiple RF Home Gateway Brand: Sercomm, MiOS Test Model: NA502 Series Model: NA502xxxxxxxx, G450xxxxx, VeraPlusxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) Sample Status: Engineering sample Applicant: Sercomm Corp. Test Date: Nov. 13 ~ Dec. 18, 2015 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the samples EMC characteristics under the conditions specified in this report. Prepared by :
:
Approved by Annie Chang / Senior Specialist
, Date:
Dec. 25, 2015 Rex Lai / Assistant Manager
, Date:
Dec. 25, 2015 Report No.: RF151111D09 Page No. 5 / 56 Report Format Version: 6.1.1 2 Summary of Test Results FCC Clause 47 CFR FCC Part 15, Subpart C (SECTION 15.247) Test Item Result Remarks 15.207 AC Power Conducted Emission PASS 15.205 & 209 Radiated Emissions 15.247(d) Band Edge Measurement 15.247(d) 15.247(a)(2) 15.247(b) 15.247(e) Antenna Port Emission 6dB bandwidth Conducted power Power Spectral Density 15.203 Antenna Requirement PASS PASS PASS PASS PASS PASS PASS Meet the requirement of limit. Minimum passing margin is -8.24 dB at 0.26328 MHz Meet the requirement of limit. Minimum passing margin is -1.1dB at 2390.00MHz. Meet the requirement of limit. Minimum passing margin is -1.2dB at 2483.50MHz. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Antenna connector is I-PEX not a standard connector. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
Measurement Conducted Emissions at mains ports Radiated Emissions up to 1 GHz Radiated Emissions above 1 GHz Frequency 150kHz ~ 30MHz 30MHz ~ 1000MHz 1GHz ~ 40GHz 2.2 Modification Record There were no modifications required for compliance. Expended Uncertainty
(k=2) () 2.78 dB 4.00 dB 3.36 dB Report No.: RF151111D09 Page No. 6 / 56 Report Format Version: 6.1.1 3 General Information 3.1 General Description of EUT Product Brand Test Model Series Model Model Difference Status of EUT Power Supply Rating Modulation Type Modulation Technology Transfer Rate Operating Frequency Number of Channel Output Power Antenna Type Multiple RF Home Gateway Sercomm, MiOS NA502 NA502xxxxxxxx, G450xxxxx, VeraPlusxxxxx (The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose) Refer to note as below Engineering sample 12Vdc from adapter CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM DSSS, OFDM 802.11b:11/5.5/2/1Mbps 802.11g: 54/48/36/24/18/12/9/6Mbps 802.11n: up to 300Mbps 2412 ~ 2462MHz 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) 670.713mW Ant. 1: PIFA antenna with 4.1dBi gain Ant. 2: Dipole antenna with 2.6dBi gain I-PEX connector Adapter N/A Antenna Connector Accessory Device Data Cable Supplied Note:
1. The EUT incorporates a MIMO function. Physically, the EUT provides two completed transmitters and two receivers. Modulation Mode 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) 2. All models are listed as below. TX Function 2TX 2TX 2TX 2TX Brand Sercomm MiOS Model Difference NA502xxxxxxxx G450xxxxx, VeraPlusxxxxx The x in model name can be 0 to 9, A to Z, blank or - , for marking purpose Report No.: RF151111D09 Page No. 7 / 56 Report Format Version: 6.1.1 1 APD WB-18D12FU-ELAA 100~240V, 0.5A, 50-60Hz 3. The EUT uses following adapter. Adapter Brand Model AC Input Power DC Output Power 12V, 1.5A US Plug Plug Type Power Cord Non-shielded DC cable (1.5m) After pre-tested, the Adapter 1 was the worst case, therefore, only its test data was recorded in this report. 2 LEI MU18A2120150-A1 100~240Vac, 0.5A, 50/60Hz 12V, 1.5A US Plug Non-shielded DC cable (1.5m) 4. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. 3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20):
Channel 1 2 3 4 5 6 Frequency 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz 7 channels are provided for 802.11n (HT40):
Channel 3 4 5 6 Frequency 2422MHz 2427MHz 2432MHz 2437MHz Channel 7 8 9 10 11 Channel 7 8 9 Frequency 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz Frequency 2442MHz 2447MHz 2452MHz Report No.: RF151111D09 Page No. 8 / 56 Report Format Version: 6.1.1 3.2.1 Test Mode Applicability and Tested Channel Detail APPLICABLE TO RE1G RE<1G
-
PLC APCM
-
EUT CONFIGURE MODE DESCRIPTION Where RE1G: Radiated Emission above 1GHz &
Bandedge Measurement PLC: Power Line Conducted Emission NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. NOTE: -means no effect. APCM: Antenna Port Conducted Measurement RE<1G: Radiated Emission below 1GHz Radiated Emission Test (Above 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE
-
-
-
-
MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 1 to 11 1 to 11 1 to 11 3 to 9 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1.0 6.0 6.5 13.5 Radiated Emission Test (Below 1GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY
-
802.11n (HT20) 1 to 11 6 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6.5 Power Line Conducted Emission Test:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY
-
802.11n (HT20) 1 to 11 6 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6.5 Report No.: RF151111D09 Page No. 9 / 56 Report Format Version: 6.1.1 Antenna Port Conducted Measurement:
This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE
-
-
-
-
MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 1 to 11 1 to 11 1 to 11 3 to 9 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1.0 6.0 6.5 13.5 Test Condition:
APPLICABLE TO ENVIRONMENTAL CONDITIONS RE1G RE<1G PLC APCM 26deg. C, 71%RH 24deg. C, 70%RH 27deg. C, 81%RH 25deg. C, 60%RH INPUT POWER 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Aaron You Aaron You Kobe Lu Dalen Dai Report No.: RF151111D09 Page No. 10 / 56 Report Format Version: 6.1.1 3.3 Duty Cycle of Test Signal If duty cycle of test signal is 100 %, duty factor is not required. If duty cycle of test signal is < 98%, duty factor shall be considered. 802.11b: Duty cycle of test signal is 100 %. 802.11g: Duty cycle = 1.36957/1.61594 = 0.848, Duty factor = 10 * log( 1/0.848) = 0.72 802.11n (HT20): Duty cycle = 1.28986/1.47101 = 0.877, Duty factor = 10 * log( 1/0.877) = 0.57 802.11n (HT40): Duty cycle = 0.61449/0.81159 = 0.757, Duty factor = 10 * log( 1/0.757) = 1.21 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) Report No.: RF151111D09 Page No. 11 / 56 Report Format Version: 6.1.1 3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID A. USB 3.0 Flash Drive B. C. Provided by Lab Provided by Lab Provided by Lab RJ45 Connector Notebook PC Brand HP N/A SONY FCC DoC Approved FCC DoC Approved 275548477001024 v250w N/A SVS151A12P Model No. Serial No. Remarks N/A N/A Product FCC ID N/A D. E. F. G. H. I. Wireless Broadband Router Z-Wave Zigbee BLE Notebook PC Notebook PC D-LINK DIR-815 PVK21B1000238 KA2IR815A1 Provided by Lab EVERSPRING AD131-2 N/A N/A SONY DELL CK77 94V-0 SmartRF V2.6 SVS151A12P PP27L N/A N/A N/A N/A N/A N/A 275548477001087 8SNZ12S FCC DoC Approved FCC DoC Approved Supplied by client Supplied by client Supplied by client Provided by Lab Provided by Lab Note:
1. All power cords of the above support units are non-shielded (1.8m). 2. Items C~I acted as communication partners to transfer data. ID Descriptions Qty. Length (m) 1. 2. 3. DC cable LAN cable LAN cable 1.5 1.5 10 Note: The core(s) is(are) originally attached to the cable(s). 1 1 1 Shielding
(Yes/No) N N N Cores (Qty.) Remarks 0 0 0 Supplied by client Supplied by client Provided by Lab Report No.: RF151111D09 Page No. 12 / 56 Report Format Version: 6.1.1 1 USB USB Flash (A) Adapter (EUT) 3.4.1 Configuration of System under Test For Conduction emission test only:
Wireless Broadband Router (D) Zigbee (F) 120Vac DC jack EUT LAN 2 RJ45 Connector (B) 3 Remote site Notebook PC (C)
<For 2.4GHz>
Z-Wave (E) BLE (G) Notebook PC (H)
<For 5.0GHz>
Report No.: RF151111D09 Page No. 13 / 56 Report Format Version: 6.1.1 1 USB USB Flash (A) Adapter (EUT) For Radiated emission test:
3.5 General Description of Applied Standards 120Vac DC jack EUT LAN 3 Remote site Notebook PC (I) The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r04 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B
(DoC). The test report has been issued separately. Report No.: RF151111D09 Page No. 14 / 56 Report Format Version: 6.1.1 Test Types and Results 4 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30.0 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 Field Strength
(microvolts/meter) Measurement Distance
(meters) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. 2. 3. The lower limit shall apply at the transition frequencies. Emission level (dBuV/m) = 20 log Emission level (uV/m). For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF151111D09 Page No. 15 / 56 Report Format Version: 6.1.1 4.1.2 Test Instruments DESCRIPTION &
MANUFACTURER HP Preamplifier HP Preamplifier MITEQ Preamplifier Agilent Spectrum Agilent TEST RECEIVER Schwarzbeck Antenna Schwarzbeck Antenna Schwarzbeck Horn Antenna Schwarzbeck Horn Antenna ADT. Turn Table ADT. Tower Software MODEL NO. SERIAL NO. CALIBRATED CALIBRATED DATE UNTIL 8447D 8449B 2432A03504 3008A01201 Feb. 26, 2015 Feb. 26, 2015 Feb. 25, 2016 Feb. 25, 2016 AMF-6F-260400-33-8 P E4446A N9038A VULB 9168 VHBA 9123 BBHA-9170 BBHA 9120-D1 TT100 AT100 Radiated_V7.6.15.9. 4 892164 Mar. 01, 2015 Feb. 28, 2016 MY51100050 MY51210129 139 480 212 D130 0306 0306 NA Jan. 20, 2015 Feb. 04, 2015 May 29, 2015 Feb. 09, 2015 Feb. 10, 2015 Jan. 19, 2016 Feb. 03, 2016 May 28, 2017 Feb. 08, 2016 Feb. 09, 2016 NA NA NA NA NA NA Aug. 14, 2016 Aug. 14, 2016 SF104 SF102 N9030A U2021XA CABLE-CH6 May 04, 2015 Aug. 15, 2015 Aug. 15, 2015 U2021XA-001 Cable-CH8-3.6m SUHNER RF cable With 4dB PAD SUHNER RF cable With 3dB PAD KEYSIGHT MIMO Powermeasurement Test set KEYSIGHT Spectrum Analyzer EMCO Horn Antenna Highpass filter Wainwright Instruments ROHDE & SCHWARZ Spectrum Analyzer Anritsu Power Sensor Anritsu Power Meter NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are WHK 3.1/18G-10SS Sep. 23, 2015 Feb. 05, 2015 MY54490260 Apr. 21, 2015 Apr. 21, 2015 Jul. 14, 2015 00028257 MA2411B ML2495A 0842014 0738404 101042 FSV40 SN 8 3115 NA NA Jul. 13, 2016 Feb. 04, 2016 May 03, 2016 Apr. 20, 2016 Apr. 20, 2016 Sep. 22, 2016 traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. Report No.: RF151111D09 Page No. 16 / 56 Report Format Version: 6.1.1 4.1.3 Test Procedures a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum f. hold mode when the test frequency is below 1 GHz. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz
(Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF151111D09 Page No. 17 / 56 Report Format Version: 6.1.1 4.1.5 Test Set Up
<Frequency Range below 1GHz>
Ant. Tower 1-4m Variable EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the Adapter to EUT. b. Prepared notebook to act as communication partner and placed it outside of testing area. c. The communication partner connected with EUT via a RJ45 cable and ran a test program (provided by manufacturer) to enable EUT under transmission condition continuously at specific channel frequency. d. The communication partner sent data to EUT by command "PING". Report No.: RF151111D09 Page No. 18 / 56 Report Format Version: 6.1.1 4.1.7 Test Results Above 1GHz Data 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.52 0.52 0.65 0.65 7.83 7.83 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN 74.0 54.0 74.0 54.0
(dBuV/m)
-14.1
-1.2 ANTENNA HEIGHT 282 282 282 282 222 222 TABLE ANGLE
(Degree)
(m) 2.36 H 2.36 H 2.36 H 2.36 H 2.41 H 2.41 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 59.9 PK 59.35 52.8 AV 52.32 112.8 PK 112.10 109.8 AV 109.10 50.5 PK 42.62 44.1 AV 36.24 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 55.53 42.82 106.53 103.98 43.77 39.35 LEVEL
(dBuV/m) 56.1 PK 43.3 AV 107.2 PK 104.6 AV 51.6 PK 47.2 AV
(m) 2.68 V 2.68 V 2.68 V 2.68 V 3.11 V 3.11 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
-18.0
-10.7
-23.6
-9.9
(dBuV/m) 74.0 54.0 MARGIN LIMIT
(dB) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 143 143 143 143 11 11
-22.4
-6.8 74.0 54.0 FACTOR
(dB/m) 0.52 0.52 0.65 0.65 7.83 7.83 Report No.: RF151111D09 Page No. 19 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4
*2437.00
*2437.00 4874.00 4874.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN 74.0 54.0
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.59 H 2.59 H 1.94 H 1.94 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 113.0 PK 112.26 110.2 AV 109.40 49.9 PK 41.94 43.4 AV 35.51 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 107.05 104.71 44.93 40.52 LEVEL
(dBuV/m) 107.8 PK 105.5 AV 52.9 PK 48.5 AV
(m) 2.80 V 2.80 V 2.52 V 2.52 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 279 279 225 225
-24.1
-10.6
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 0.76 0.76 7.93 7.93 CORRECTION FACTOR
(dB/m) 0.76 0.76 7.93 7.93 1 2 3 4 74.0 54.0
*2437.00
*2437.00 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 125 125 60 60
-21.1
-5.6 Report No.: RF151111D09 Page No. 20 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.88 0.88 0.98 0.98 8.08 8.08 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-4.3
-7.9
-23.9
-10.2 288 288 288 288 230 230 TABLE ANGLE
(Degree)
(m) 2.54 H 2.54 H 2.54 H 2.54 H 1.96 H 1.96 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 112.8 PK 111.96 110.1 AV 109.22 69.7 PK 68.76 46.1 AV 45.13 50.1 PK 41.99 43.8 AV 35.68 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 109.86 107.52 65.05 44.40 44.82 41.39 LEVEL
(dBuV/m) 110.7 PK 108.4 AV 66.0 PK 45.4 AV 52.9 PK 49.5 AV
(m) 3.39 V 3.39 V 3.39 V 3.39 V 2.61 V 2.61 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) 1 2 3 4 5 6 74.0 54.0 74.0 54.0
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 246 246 246 246 57 57
-8.0
-8.6
-21.1
-4.5 FACTOR
(dB/m) 0.88 0.88 0.98 0.98 8.08 8.08 Report No.: RF151111D09 Page No. 21 / 56 Report Format Version: 6.1.1 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.52 0.52 0.65 0.65 7.83 7.83 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz)
(dB) LIMIT
-1.2
-1.2 MARGIN 74.0 54.0 74.0 54.0
(dBuV/m) ANTENNA HEIGHT 261 261 261 261 232 232 TABLE ANGLE
(Degree)
(m) 2.32 H 2.32 H 2.32 H 2.32 H 2.07 H 2.07 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 72.8 PK 72.30 52.8 AV 52.24 115.3 PK 114.69 106.3 AV 105.63 47.8 PK 39.93 36.5 AV 28.69 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 68.13 50.46 110.30 100.55 40.45 29.89 LEVEL
(dBuV/m) 68.7 PK 51.0 AV 111.0 PK 101.2 AV 48.3 PK 37.7 AV
(m) 3.32 V 3.32 V 3.32 V 3.32 V 2.63 V 2.63 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
-26.2
-17.5
(dBuV/m) 74.0 54.0 MARGIN LIMIT
(dB)
-5.4
-3.0 74.0 54.0 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 68 68 68 68 207 207
-25.7
-16.3 FACTOR
(dB/m) 0.52 0.52 0.65 0.65 7.83 7.83 Report No.: RF151111D09 Page No. 22 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4
*2437.00
*2437.00 4874.00 4874.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN 74.0 54.0
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.54 H 2.54 H 1.98 H 1.98 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 116.9 PK 116.12 107.8 AV 107.00 48.0 PK 40.06 37.0 AV 29.10 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 112.07 102.67 40.63 29.80 LEVEL
(dBuV/m) 112.8 PK 103.4 AV 48.6 PK 37.7 AV
(m) 3.33 V 3.33 V 2.51 V 2.51 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 257 257 243 243
-26.0
-17.0
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 0.76 0.76 7.93 7.93 CORRECTION FACTOR
(dB/m) 0.76 0.76 7.93 7.93 1 2 3 4 74.0 54.0
*2437.00
*2437.00 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 69 69 200 200
-25.4
-16.3 Report No.: RF151111D09 Page No. 23 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.88 0.88 0.98 0.98 8.08 8.08 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-2.7
-1.2
-26.2
-17.3 251 251 251 251 238 238 TABLE ANGLE
(Degree)
(m) 2.76 H 2.76 H 2.76 H 2.76 H 2.00 H 2.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 113.9 PK 113.00 105.1 AV 104.19 71.3 PK 70.32 52.8 AV 51.80 47.8 PK 39.74 36.7 AV 28.62 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 109.82 100.22 63.10 46.05 40.02 28.90 LEVEL
(dBuV/m) 110.7 PK 101.1 AV 64.1 PK 47.0 AV 48.1 PK 37.0 AV
(m) 3.58 V 3.58 V 3.58 V 3.58 V 2.47 V 2.47 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) 1 2 3 4 5 6 74.0 54.0 74.0 54.0
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 69 69 69 69 203 203
-9.9
-7.0
-25.9
-17.0 FACTOR
(dB/m) 0.88 0.88 0.98 0.98 8.08 8.08 Report No.: RF151111D09 Page No. 24 / 56 Report Format Version: 6.1.1 802.11n (20MHz) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.52 0.52 0.65 0.65 7.83 7.83 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz)
(dB) LIMIT
-4.5
-1.1 MARGIN 74.0 54.0 74.0 54.0
(dBuV/m) ANTENNA HEIGHT 263 263 263 263 220 220 TABLE ANGLE
(Degree)
(m) 2.58 H 2.58 H 2.58 H 2.58 H 2.23 H 2.23 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 69.5 PK 68.99 52.9 AV 52.42 112.3 PK 111.63 102.8 AV 102.11 47.1 PK 39.27 35.8 AV 27.99 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 62.88 47.10 106.43 96.14 39.56 28.15 LEVEL
(dBuV/m) 63.4 PK 47.6 AV 107.1 PK 96.8 AV 47.4 PK 36.0 AV
(m) 3.13 V 3.13 V 3.13 V 3.13 V 2.77 V 2.77 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
-26.9
-18.2
-26.6
-18.0
(dBuV/m) 74.0 54.0 MARGIN LIMIT
(dB) 74.0 54.0
-10.6
-6.4 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 240 240 240 240 186 186 FACTOR
(dB/m) 0.52 0.52 0.65 0.65 7.83 7.83 Report No.: RF151111D09 Page No. 25 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4
*2437.00
*2437.00 4874.00 4874.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN 74.0 54.0
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree)
(m) 2.76 H 2.76 H 2.27 H 2.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 115.8 PK 115.06 106.1 AV 105.32 48.2 PK 40.23 36.4 AV 28.51 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 111.15 101.30 41.63 29.71 LEVEL
(dBuV/m) 111.9 PK 102.1 AV 49.6 PK 37.6 AV
(m) 3.00 V 3.00 V 2.68 V 2.68 V TABLE ANGLE
(Degree) ANTENNA HEIGHT 262 262 215 215
-25.8
-17.6
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 0.76 0.76 7.93 7.93 CORRECTION FACTOR
(dB/m) 0.76 0.76 7.93 7.93 1 2 3 4 74.0 54.0
*2437.00
*2437.00 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 67 67 193 193
-24.4
-16.4 Report No.: RF151111D09 Page No. 26 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.88 0.88 0.98 0.98 8.08 8.08 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-4.7
-1.3
-26.4
-17.9 248 248 248 248 210 210 TABLE ANGLE
(Degree)
(m) 2.80 H 2.80 H 2.80 H 2.80 H 2.27 H 2.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 112.6 PK 111.67 103.3 AV 102.38 69.3 PK 68.35 52.7 AV 51.68 47.6 PK 39.53 36.1 AV 28.02 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 108.05 97.92 67.81 48.34 40.30 28.91 LEVEL
(dBuV/m) 108.8 PK 98.7 AV 68.8 PK 49.3 AV 48.4 PK 37.0 AV
(m) 2.93 V 2.93 V 2.93 V 2.93 V 2.73 V 2.73 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) 1 2 3 4 5 6 74.0 54.0 74.0 54.0
-5.2
-4.7
-25.6
-17.0
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. 70 70 70 70 183 183 FACTOR
(dB/m) 0.76 0.76 0.98 0.98 8.08 8.08 Report No.: RF151111D09 Page No. 27 / 56 Report Format Version: 6.1.1 802.11n (40MHz) CHANNEL TX Channel 3 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.52 0.52 0.69 0.69 7.87 7.87 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 NO. FREQ.
(MHz)
(dB) LIMIT
-3.1
-1.2 MARGIN 74.0 54.0 74.0 54.0
(dBuV/m) ANTENNA HEIGHT 257 257 257 257 208 208 TABLE ANGLE
(Degree)
(m) 2.30 H 2.30 H 2.30 H 2.30 H 2.40 H 2.40 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 70.9 PK 70.38 52.8 AV 52.32 108.3 PK 107.65 99.1 AV 98.39 46.8 PK 38.97 35.5 AV 27.65 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 66.51 48.79 101.82 91.20 39.25 28.40 LEVEL
(dBuV/m) 67.0 PK 49.3 AV 102.5 PK 91.9 AV 47.1 PK 36.3 AV
(m) 2.82 V 2.82 V 2.82 V 2.82 V 2.43 V 2.43 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
-27.2
-18.5
(dBuV/m) 74.0 54.0 MARGIN LIMIT
(dB)
-7.0
-4.7 74.0 54.0 1 2 3 4 5 6 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 233 233 233 233 162 162
-26.9
-17.7 FACTOR
(dB/m) 0.52 0.52 0.69 0.69 7.87 7.87 Report No.: RF151111D09 Page No. 28 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT
-5.7
-3.4 MARGIN 74.0 54.0
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-3.4
-1.3
-25.0
-16.2 TABLE ANGLE
(Degree) 257 257 257 257 257 257 170 170 CORRECTION FACTOR
(dB/m) 0.52 0.52 0.76 0.76 0.98 0.98 7.93 7.93 CORRECTION
(m) 2.54 H 2.54 H 2.54 H 2.54 H 2.54 H 2.54 H 2.50 H 2.50 H NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 NO. FREQ.
(MHz) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 68.3 PK 67.80 50.6 AV 50.09 113.2 PK 112.42 104.5 AV 103.69 70.6 PK 69.65 52.7 AV 51.69 49.0 PK 41.03 37.8 AV 29.84 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 63.84 45.77 106.58 96.26 65.66 46.91 41.28 29.99 LEVEL
(dBuV/m) 64.4 PK 46.3 AV 107.3 PK 97.0 AV 66.6 PK 47.9 AV 49.2 PK 37.9 AV 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency.
(m) 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 3.06 V 2.50 V 2.50 V FACTOR
(dB/m) 0.52 0.52 0.76 0.76 0.98 0.98 7.93 7.93 253 253 253 253 253 253 173 173 TABLE ANGLE
(Degree)
-7.4
-6.1
-24.8
-16.1 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 1 2 3 4 5 6 7 8
(dBuV/m) 74.0 54.0 MARGIN
-9.6
-7.7 LIMIT
(dB) Report No.: RF151111D09 Page No. 29 / 56 Report Format Version: 6.1.1 CHANNEL TX Channel 9 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) CORRECTION FACTOR
(dB/m) 0.83 0.83 0.98 0.98 8.00 8.00 CORRECTION NO. FREQ.
(MHz) 1 2 3 4 5 6
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-3.7
-1.2
-27.0
-18.4 251 251 251 251 159 159 TABLE ANGLE
(Degree)
(m) 2.26 H 2.26 H 2.26 H 2.26 H 2.41 H 2.41 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 107.3 PK 106.43 99.0 AV 98.13 70.3 PK 69.32 52.8 AV 51.82 47.0 PK 38.97 35.6 AV 27.62 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.14 91.73 62.82 45.68 39.28 28.17 LEVEL
(dBuV/m) 103.0 PK 92.6 AV 63.8 PK 46.7 AV 47.3 PK 36.2 AV
(m) 3.08 V 3.08 V 3.08 V 3.08 V 2.33 V 2.33 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) 1 2 3 4 5 6 74.0 54.0 74.0 54.0
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 231 231 231 231 165 165
-10.2
-7.3
-26.7
-17.8 FACTOR
(dB/m) 0.83 0.83 0.98 0.98 8.00 8.00 Report No.: RF151111D09 Page No. 30 / 56 Report Format Version: 6.1.1 BELOW 1GHz WORST-CASE DATA 802.11n (20MHz) CHANNEL TX Channel 6 FREQUENCY RANGE 30MHz ~ 1GHz DETECTOR FUNCTION Quasi-Peak (QP) CORRECTION FACTOR
(dB/m)
-10.23
-8.48
-10.97
-2.66 3.10 5.68 CORRECTION NO. 1 2 3 4 5 6 FREQ.
(MHz) 35.29 154.45 208.38 500.01 826.42 959.99 NO. FREQ.
(MHz)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT 49 258 81 252 161 40 TABLE ANGLE
(Degree) 40.0 43.5 43.5 46.0 46.0 46.0
-15.5
-16.5
-16.1
-11.2
-12.6
-9.8
(m) 4.00 H 4.00 H 3.65 H 1.62 H 1.07 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 24.5 QP 34.76 27.0 QP 35.49 27.4 QP 38.37 34.8 QP 37.44 33.4 QP 30.33 36.2 QP 30.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 43.27 40.66 30.65 33.58 30.24 28.87 LEVEL
(dBuV/m) 33.0 QP 26.3 QP 24.5 QP 30.9 QP 33.1 QP 34.8 QP
(m) 1.11 V 1.24 V 1.00 V 2.23 V 2.06 V 1.99 V TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) 1 2 3 4 5 6 40.0 43.5 46.0 46.0 46.0 54.0
-7.0
-17.2
-21.5
-15.1
-12.9
-19.2 35.29 92.56 327.40 500.01 811.92 979.99 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 155 31 78 206 357 324 FACTOR
(dB/m)
-10.23
-14.32
-6.18
-2.66 2.86 5.97 Report No.: RF151111D09 Page No. 31 / 56 Report Format Version: 6.1.1 4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Frequency (MHz) 0.15 - 0.5 0.50 - 5.0 5.0 - 30.0 Quasi-peak 66 - 56 56 60 Conducted Limit (dBuV) Average 56 - 46 46 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Cal. Due Mar. 31, 2016 Apr. 26, 2016 Apr. 26, 2016 Nov. 24, 2015 AD10 101197 100276 100218 ENV216 ESH3-Z5 ESCS 30 Cal. Date Serial No. Model No. C10Ada-002 Apr. 01, 2015 Apr. 27, 2015 Apr. 27, 2015 Description & Manufacturer ROHDE & SCHWARZ TEST RECEIVER ROHDE & SCHWARZ Artificial Mains Network
(for EUT) LISN With Adapter
(for EUT) ROHDE & SCHWARZ Artificial Mains Network
(for peripherals) SCHWARZBECK Artificial Mains Network (For EUT) Software RF cable (JYEBAO) With 10dB PAD SUHNER Terminator
(For ROHDE & SCHWARZ LISN) ROHDE & SCHWARZ Artificial Mains Network (For TV EUT) LISN With Adapter
(for TV EUT) Notes: 1. The calibration interval of the above test instruments is 12 months and the calibrations are Feb. 17, 2015 Cable-C10.01 Nov. 25, 2014 Nov. 13, 2015 Nov. 13, 2015 May 06, 2015 May 19, 2015 Cond_V7.3.7 65BNC-5001 NNLK8129 E1-011484 ESH3-Z5 8129229 100220 100220 5D-FB N/A NA NA NA Nov. 12, 2016 Nov. 12, 2016 Feb. 16, 2016 May 18, 2016 May 05, 2016 traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. 10. 3. The VCCI Site Registration No. C-1852. 4. Tested Date: Nov. 20, 2015 Report No.: RF151111D09 Page No. 32 / 56 Report Format Version: 6.1.1 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane 40cm EUT LISN 80cm Test Receiver Note: Support units were connected to second LISN. Horizontal Ground Reference Plane For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as item 4.1.6. Report No.: RF151111D09 Page No. 33 / 56 Report Format Version: 6.1.1 4.2.7 Test Results CONDUCTED WORST-CASE DATA Frequency Range 150kHz ~ 30MHz Detector Function &
Resolution Bandwidth Quasi-Peak (QP) /
Average (AV), 9kHz Frequency
(MHz) 0.17734 0.26328 0.28281 0.54844 3.42188 15.39453 Correction Factor
(dB) 9.68 9.68 9.68 9.71 9.92 10.12 No 1 2 3 4 5 6 Phase Of Power : Line (L) Emission Level Reading Value
(dBuV)
(dBuV) Limit
(dBuV) Q.P. 31.03 31.22 29.12 16.70 18.57 14.97 AV. 22.63 27.68 26.21 7.28 9.23 9.24 Q.P. 40.71 40.90 38.80 26.41 28.49 25.09 AV. 32.31 37.36 35.89 16.99 19.15 19.36 Q.P. 64.61 61.33 60.73 56.00 56.00 60.00 AV. 54.61 51.33 50.73 46.00 46.00 50.00 Margin
(dB) Q.P.
-23.90
-20.42
-21.93
-29.59
-27.51
-34.91 AV.
-22.30
-13.96
-14.84
-29.01
-26.85
-30.64 Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF151111D09 Page No. 34 / 56 Report Format Version: 6.1.1 Frequency Range 150kHz ~ 30MHz Detector Function &
Resolution Bandwidth Quasi-Peak (QP) /
Average (AV), 9kHz Frequency
(MHz) 0.15391 0.19297 0.26328 0.54063 3.39453 15.21484 Correction Factor
(dB) 9.72 9.73 9.73 9.75 9.94 10.20 No 1 2 3 4 5 6 Phase Of Power : Neutral (N) Emission Level Reading Value
(dBuV)
(dBuV) Limit
(dBuV) Q.P. 33.52 32.12 35.60 17.60 19.43 15.26 AV. 24.23 26.11 33.35 11.38 8.92 9.91 Q.P. 43.24 41.85 45.33 27.35 29.37 25.46 AV. 33.95 35.84 43.08 21.13 18.86 20.11 Q.P. 65.79 63.91 61.33 56.00 56.00 60.00 AV. 55.79 53.91 51.33 46.00 46.00 50.00 Margin
(dB) Q.P.
-22.55
-22.06
-15.99
-28.65
-26.63
-34.54 AV.
-21.84
-18.07
-8.24
-24.87
-27.14
-29.89 Remarks:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF151111D09 Page No. 35 / 56 Report Format Version: 6.1.1 4.3 4.3.1 Limits of 6dB Bandwidth Measurement 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup EUT 4.3.3 Test Instruments Attenuator SPECTRUM ANALYZER Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.5 Deviation fromTest Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF151111D09 Page No. 36 / 56 Report Format Version: 6.1.1 4.3.7 Test Result 802.11b Channel Frequency (MHz) 1 6 11 802.11g 2412 2437 2462 Channel Frequency (MHz) 1 6 11 2412 2437 2462 802.11n (HT20) Channel Frequency (MHz) 1 6 11 2412 2437 2462 802.11n (HT40) Channel Frequency (MHz) 3 6 9 2422 2437 2452 6dB Bandwidth
(MHz) CHAIN 0 CHAIN 1 10.07 9.10 10.06 10.04 9.57 10.07 6dB Bandwidth
(MHz) CHAIN 0 CHAIN 1 15.15 15.17 15.17 15.14 15.17 15.16 6dB Bandwidth
(MHz) CHAIN 0 CHAIN 1 15.16 15.16 15.17 15.14 15.17 15.17 6dB Bandwidth
(MHz) CHAIN 0 CHAIN 1 35.18 35.18 35.19 35.19 35.18 35.19 Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 PASS PASS PASS Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 PASS PASS PASS Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 Pass Pass Pass Minimum Limit
(MHz) Pass / Fail 0.5 0.5 0.5 Pass Pass Pass Report No.: RF151111D09 Page No. 37 / 56 Report Format Version: 6.1.1 802.11b Spectrum Plot of Worst Value 802.11g 802.11n (HT20) 802.11n (HT40) Report No.: RF151111D09 Page No. 38 / 56 Report Format Version: 6.1.1 4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt (30dBm) Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. 4.4.2 Test Setup EUT Attenuator Power Sensor Power Meter 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the power level. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as Item 4.3.6. Report No.: RF151111D09 Page No. 39 / 56 Report Format Version: 6.1.1 4.4.7 Test Results FOR PEAK POWER 802.11b Chan. 1 6 11 802.11g Chan. 1 6 11 Freq.
(MHz) 2412 2437 2462 Freq.
(MHz) 2412 2437 2462 802.11n (HT20) Chan. 1 6 11 Freq.
(MHz) 2412 2437 2462 802.11n (HT40) Freq.
(MHz) 2422 2437 2452 Chan. 3 6 9 Report No.: RF151111D09 Total Power
(mW) 306.937 389.973 389.098 Total Power
(mW) 597.418 653.425 535.137 Total Power
(mW) 448.173 670.713 441.637 Total Power
(mW) 308.422 601.975 305.630 Total Power
(dBm) 24.87 25.91 25.90 Total Power
(dBm) 27.76 28.15 27.28 Total Power
(dBm) 26.51 28.27 26.45 Total Power
(dBm) 24.89 27.80 24.85 Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Limit
(dBm) Pass / Fail 30 30 30 Pass Pass Pass Peak Power (dBm) Chain 0 21.90 22.92 22.94 Chain 1 21.82 22.88 22.84 Peak Power (dBm) Chain 0 25.00 25.26 24.55 Chain 1 24.49 25.02 23.98 Peak Power (dBm) Chain 0 23.69 25.28 23.73 Chain 1 23.31 25.23 23.13 Peak Power (dBm) Chain 0 21.98 24.85 21.96 Chain 1 21.78 24.72 21.72 Page No. 40 / 56 Report Format Version: 6.1.1 FOR AVERAGE POWER 802.11b Chan. Frequency
(MHz) 2412 2437 2462 1 6 11 802.11g Chan. Frequency
(MHz) 1 6 11 2412 2437 2462 802.11n (HT20) Chan. Frequency
(MHz) 1 6 11 2412 2437 2462 802.11n (HT40) Chan. Frequency
(MHz) 3 6 9 2422 2437 2452 Avg. Power (dBm) Chain 0 20.10 21.06 21.09 Chain 1 20.09 21.00 21.04 Total Power
(mW) Total Power
(dBm) 204.423 253.537 255.586 23.11 24.04 24.08 Avg. Power (dBm) Chain 0 18.75 19.81 17.71 Chain 1 18.26 19.59 16.76 Total Power
(mW) Total Power
(dBm) 141.977 186.710 106.444 21.52 22.71 20.27 Avg. Power (dBm) Chain 0 16.21 19.83 16.54 Chain 1 15.70 19.63 16.31 Total Power
(mW) Total Power
(dBm) 78.937 187.994 87.838 18.97 22.74 19.44 Avg. Power (dBm) Chain 0 14.42 19.32 14.38 Chain 1 13.94 18.88 13.92 Total Power
(mW) Total Power
(dBm) 52.443 162.775 52.076 17.20 22.12 17.17 Report No.: RF151111D09 Page No. 41 / 56 Report Format Version: 6.1.1 4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 Test Setup EUT 4.5.3 Test Instruments 10dB ATTENUATION PAD SPECTRUM ANALYZER Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz RBW 100 kHz. d. Set the VBW 3 RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.3.6 Report No.: RF151111D09 Page No. 42 / 56 Report Format Version: 6.1.1 4.5.7 Test Results 802.11b TX chain Channel 0 1 1 6 11 1 6 11 Freq.
(MHz) 2412 2437 2462 2412 2437 2462 PSD
(dBm)
-2.09
-2.12
-2.06
-2.03
-2.24
-2.43 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Total PSD
(dBm) 0.92 0.89 0.95 0.98 0.77 0.58 Limit
(dBm) 6.89 6.89 6.89 6.89 6.89 6.89 Pass
/Fail Pass Pass Pass Pass Pass Pass NOTE: Directional gain = 4.10dBi + 10log(2) = 7.11dBi > 6dBi , so the power density limit shall be reduced to 8-(7.11-6) = 6.89dBm. 802.11g TX chain Channel 0 1 1 6 11 1 6 11 Freq.
(MHz) 2412 2437 2462 2412 2437 2462 PSD
(dBm)
-8.41
-6.67
-8.77
-8.70
-6.64
-9.99 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Total PSD
(dBm)
-5.40
-3.66
-5.76
-5.69
-3.63
-6.98 Limit
(dBm) 6.89 6.89 6.89 6.89 6.89 6.89 Pass
/Fail Pass Pass Pass Pass Pass Pass NOTE: Directional gain = 4.10dBi + 10log(2) = 7.11dBi > 6dBi , so the power density limit shall be reduced to 8-(7.11-6) = 6.89dBm. Report No.: RF151111D09 Page No. 43 / 56 Report Format Version: 6.1.1 802.11n (HT20) TX chain Channel 0 1 1 6 11 1 6 11 Freq.
(MHz) 2412 2437 2462 2412 2437 2462 PSD
(dBm)
-10.94
-6.60
-10.68
-10.70
-7.30
-9.66 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Total PSD
(dBm)
-7.93
-3.59
-7.67
-7.69
-4.29
-6.65 Limit
(dBm) 6.89 6.89 6.89 6.89 6.89 6.89 Pass
/Fail Pass Pass Pass Pass Pass Pass NOTE: Directional gain = 4.10dBi + 10log(2) = 7.11dBi > 6dBi , so the power density limit shall be reduced to 8-(7.11-6) = 6.89dBm. 802.11n (HT40) TX chain Channel 0 1 3 6 9 3 6 9 Freq.
(MHz) 2422 2437 2452 2422 2437 2452 PSD
(dBm)
-14.41
-10.91
-15.50
-14.99
-10.35
-13.60 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Total PSD
(dBm)
-11.40
-7.90
-12.49
-11.98
-7.34
-10.59 Limit
(dBm) 6.89 6.89 6.89 6.89 6.89 6.89 Pass
/Fail Pass Pass Pass Pass Pass Pass NOTE: Directional gain = 4.10dBi + 10log(2) = 7.11dBi > 6dBi , so the power density limit shall be reduced to 8-(7.11-6) = 6.89dBm. Report No.: RF151111D09 Page No. 44 / 56 Report Format Version: 6.1.1 802.11b Spectrum Plot of Worst Value 802.11g 802.11n (HT20) 802.11n (HT40) Report No.: RF151111D09 Page No. 45 / 56 Report Format Version: 6.1.1 4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). EUT Attenuator SPECTRUM ANALYZER 4.6.2 Test Setup 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as Item 4.3.6 4.6.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF151111D09 Page No. 46 / 56 Report Format Version: 6.1.1 802.11b CHAIN 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF151111D09 Page No. 47 / 56 Report Format Version: 6.1.1 CHAIN 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF151111D09 Page No. 48 / 56 Report Format Version: 6.1.1 802.11g CHAIN 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF151111D09 Page No. 49 / 56 Report Format Version: 6.1.1 CHAIN 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF151111D09 Page No. 50 / 56 Report Format Version: 6.1.1 802.11n (HT20) CHAIN 0 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF151111D09 Page No. 51 / 56 Report Format Version: 6.1.1 CHAIN 1 CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF151111D09 Page No. 52 / 56 Report Format Version: 6.1.1 802.11n (HT40) CHAIN 0 CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF151111D09 Page No. 53 / 56 Report Format Version: 6.1.1 CHAIN 1 CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF151111D09 Page No. 54 / 56 Report Format Version: 6.1.1 5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF151111D09 Page No. 55 / 56 Report Format Version: 6.1.1 Appendix Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab Tel: 886-2-26052180 Fax: 886-2-26051924 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF/Telecom Lab Tel: 886-3-6668565 Fax: 886-3-6668323 The address and road map of all our labs can be found in our web site also.
--- END ---
Report No.: RF151111D09 Page No. 56 / 56 Report Format Version: 6.1.1
This product uses the FCC Data API but is not endorsed or certified by the FCC